FACTORY SOURCING HUB — COPPER CABLE LUGS, CRIMP TERMINALS, FERRULES & TOOLS SOURCING
Page reference: 0221
Send to: kunhuow@gmail.com

Reply email:
Product / reference:
Quantity per model and variation:
Sales market / intended user:
Material / size / performance:
Logo / artwork:
Packaging / labels / carton requirements:
Samples / testing / documents:
Target budget / timing / shipping basis:
Additional requirements:

REFERENCE OPTIONS
0221-01 | Straight tubular copper lug
Direction: Straight palm, tubular barrel; Quotation details: Conductor, connection hole, barrel and tooling
0221-02 | Angled tubular lug
Angle directions: 45° and 90° references; Selection basis: Current drawing and terminal orientation
0221-03 | Inspection-hole and closed-barrel directions
Options: Selected inspection-hole or no-inspection-hole barrel; Selection basis: Conductor, entry, palm and crimp geometry
0221-04 | Flared-entry and straight-entry lugs
Entry directions: Selected straight or flared entry; Project details: Conductor construction, entry diameter, barrel and palm
0221-05 | German tubular-reference direction
Published standard reference: DIN 46235; Selection basis: Exact drawing, conductor and required documents
0221-06 | German sheet-terminal direction
Published standard reference: DIN 46234; Selection basis: Exact drawing and connection requirements
0221-07 | American wire-system reference
Size-system direction: AWG reference; Selection basis: Conductor construction, barrel and hole geometry
0221-08 | Two-hole and special-palm lug directions
Directions: Two-hole, twin-barrel, widened or narrow forms; Project details: Hole pattern, palm clearances and barrel arrangement
0221-09 | Bare ring-terminal reference
Published wire range: 0.25–1.65 mm² / AWG 22–16; Insulation direction: Non-insulated
0221-10 | Bare fork-terminal reference
Published wire range: 0.25–1.65 mm² / AWG 22–16; Insulation direction: Non-insulated
0221-11 | PVC-insulated ring reference
Published wire range: 0.25–1.65 mm² / AWG 22–16; Published colour: Red; Insulation direction: PVC
0221-12 | PVC-insulated fork reference
Published wire range: 0.25–1.65 mm² / AWG 22–16; Published colour: Red; Insulation direction: PVC
0221-13 | Nylon-insulated ring reference
Published wire range: 0.25–1.65 mm² / AWG 22–16; Published colour: Red; Insulation direction: Nylon
0221-14 | Male and female push-on directions
Directions: Male, female and fully insulated variants; Selection basis: Tab geometry, conductor, insulation and mating fit
0221-15 | Fully insulated female reference
Published stranded-wire range: 0.75–1.25 mm² / AWG 18–16; Published colour: Red; Direction: Fully insulated female terminal
0221-16 | Bullet and pin terminal directions
Directions: Bullet connection; bare or insulated pin; Selection basis: Mating dimensions, conductor and crimp method
0221-17 | Single-wire insulated ferrule reference
Published wire area: 0.14 mm²; Published overall length: 10 mm ±1.5 mm; Published sleeve length: 6 mm ±0.5 mm
0221-18 | Twin-wire ferrule reference
Published wire combination: 2 × 0.50 mm²; Published overall length: 15 mm ±1.5 mm; Published sleeve length: 8 mm ±0.5 mm
0221-19 | Bare joining-sleeve directions
Directions: Several straight splice-sleeve constructions; Quotation details: Wire combination, entry, stop and tooling
0221-20 | PVC and nylon insulated splices
Insulation directions: PVC or nylon; Selection basis: Conductor construction, splice geometry and crimp specification
0221-21 | C-shaped copper compression connector
Direction: C-shaped copper compression connector; Surface directions: Selected pickled or tinned option; confirm item
0221-22 | Closed-end and screw-on connector directions
Formats: Closed-end or screw-on connector; Confirm individually: Wire combinations, electrical rating, material and use conditions
0221-23 | Soft insulation and wire-clip accessories
Directions: Soft insulating sleeve; selected wire clip; Selection basis: Fit, insulation, conductor and assembly schedule
0221-24 | Small ferrule crimp-tool reference
Published DIN terminal-area positions: 0.5, 0.75, 1.0, 1.5, 2.5, 4.0 mm²; Terminal direction: Insulated or non-insulated pin ferrules
0221-25 | Larger ferrule crimp-tool reference
Published DIN terminal-area positions: 6.0, 10, 16 mm²; Terminal direction: Insulated or non-insulated pin ferrules
0221-26 | Cable cutters and other crimp tools
Tool directions: Cable cutters; selected manual crimp tools; Selection basis: Current tool capacity and terminal/conductor compatibility
0221-27 | Copper stock and shaped-part projects
Material formats: Tube, strip, sheet, flat bar, rod and selected shaped forms; Quotation details: Grade, condition, dimensions, tolerances and finish
0221-28 | Custom formed and stamped terminals
Project basis: Buyer drawing, material and connection schedule; Development details: Tooling, sample, fit and test requirements
0221-29 | Copper–aluminium transition request
Project direction: Copper–aluminium transition lug; Required confirmation: Actual material build and current technical specification

This is a sourcing brief, not a quotation, certification, stock confirmation or guaranteed delivery schedule. Confirm the model-specific specification, minimums, sample approval, costs, lead time and contract terms before ordering.