FACTORY SOURCING HUB — CUTTING, DRILLING, ABRASIVE & WORKSHOP TOOL SOURCING
Page reference: 0307
Send to: kunhuow@gmail.com

Reply email:
Product / reference:
Quantity per model and variation:
Sales market / intended user:
Material / size / performance:
Logo / artwork:
Packaging / labels / carton requirements:
Samples / testing / documents:
Target budget / timing / shipping basis:
Additional requirements:

REFERENCE OPTIONS
0307-01 | Spiral-flute TiN HSS countersink assortment
Countersink angle: 90°; Sizes: 6.3, 8.3, 10.4, 12.4, 16.5, 20.5 mm
0307-02 | Three-flute step-drill assortment
Range options: 4–12; 4–20; 4–30 mm; Set: 3 pieces
0307-03 | Milling insert cutting reference
Cutting speed Vc: 120 m/min; stated range 100–160 m/min; Feed per tooth fz: 0.20 mm/tooth; stated range 0.10–0.25 mm/tooth
0307-04 | Thread-turning inserts
Vc for material group P: 120 m/min; range 70–180; Vc for material group M: 110 m/min; range 70–170; Vc for material group K: 110 m/min; range 80–160
0307-05 | Parting and grooving inserts
Cutting speed Vc: 130 m/min; range 50–200; X feed fnx: 0.08 mm/rev; range 0.05–0.18; Z feed fnz: 0.10 mm/rev; range 0.05–0.20
0307-06 | Steel-turning insert cutting reference
Vc: 200 m/min; range 120–260; Depth of cut ap: 2.50 mm; range 1.20–4.00; Feed f: 0.30 mm/rev; range 0.20–0.45
0307-07 | Black-and-gold M2 twist drills
Point angle: 135°
0307-08 | Carbide composite drills
Size references: 2.6/3/4/5/6 × 50 × 150 mm
0307-09 | Resin-bonded superabrasive grinding discs
Dia | Inner hole | high diamond coating | teeth thick — verify units and ordered drawing: 3.150" | 0.63 | 0.25 | 0.125; 3.150" | 0.63 | 0.25 | 0.1875; 3.150" | 0.63 | 0.125 | 0.25; 5.750" | 0.875 | 0.25 | 0.125; 4.125" | 0.875 | 0.25 | 0.125; 4.125" | 0.875 | 0.25 | 0.1875
0307-10 | Electroplated superabrasive grinding discs
Dia | Inner hole | high diamond coating | teeth thick — verify units and ordered drawing: 3.150" | 0.63 | 0.25 | 0.125; 3.150" | 0.63 | 0.25 | 0.1875; 3.150" | 0.63 | 0.125 | 0.25; 5.750" | 0.875 | 0.25 | 0.125; 4.125" | 0.875 | 0.25 | 0.125; 4.125" | 0.875 | 0.25 | 0.1875
0307-11 | Fully ground elongated twist drills
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-12 | Two-flute ball-nose carbide end mills
Radius range: R0.1–6 mm; Overall length range: 40–75 mm
0307-13 | Two-flute square end mills
Diameter range: 1–12 mm; Length range: 40–75 mm
0307-14 | Four-flute square end mills
Diameter range: 1–12 mm; Length range: 40–75 mm
0307-15 | Four-flute radius end mills
Diameter range: 1–12 mm; Length range: 45–100 mm
0307-16 | Two-flute ball-nose tools for hardened workpieces
Application reference: Hardened steel up to 65 HRC; application selection requires confirmation
0307-17 | Long-neck small-radius ball end mills
Radius/length reference: R0.1–0.4 × 50 mm; Flutes: 4; Application reference: Hardened-steel direction up to 65 HRC, subject to machining review
0307-18 | Four-flute high-helix square end mills
Helix: 45°; Diameter × length options: 2/2.5/3/4/5/6 × 60; 7/7.5 × 70; 8 × 75; 10 × 90; 12 × 100; 16 × 110; 20 × 130 mm
0307-19 | Three-cutter solid-carbide-tip hammer drills
Interface: SDS-plus; Diameter range: 4–16 mm; Length range: 110–600 mm
0307-20 | Cross-tip solid-carbide-tip hammer drills
Interface: SDS-plus; Diameter range: 4–16 mm; Length range: 110–600 mm
0307-21 | DIN8035 SDS-max shank hammer drill
Dia. | Oal. — verify units and ordered drawing: 12 | 370; 14 | 370; 16 | 370; 18 | 370; 20 | 370; 22 | 370; 25 | 370; 28 | 370; 30 | 370; 32 | 370; 35 | 370; 38 | 370; 40 | 370; 12 | 570; 14 | 570; 16 | 570; 18 | 570; 20 | 570; 22 | 570; 25 | 570; 28 | 570; 30 | 570; 32 | 570; 35 | 570; 38 | 570; 40 | 570; 12 | 920; 14 | 920; 16 | 920; 18 | 920; 20 | 920; 22 | 920; 25 | 920; 28 | 920; 30 | 920; 32 | 920; 35 | 920; 38 | 920; 40 | 920; 20 | 1320; 22 | 1320; 25 | 1320; 28 | 1320; 30 | 1320; 32 | 1320
0307-22 | DIN8035 SDS plus shank hammer drill crosscut professional
Dia. | Oal. — verify units and ordered drawing: 5 | 110; 5.5 | 110; 6 | 110; 6.5 | 110; 7 | 110; 8 | 110; 9 | 110; 10 | 110; 11 | 110; 12 | 110; 13 | 110; 14 | 110; 4 | 160; 5.5 | 160; 6 | 160; 6.5 | 160; 7 | 160; 8 | 160; 9 | 160; 10 | 160; 11 | 160; 12 | 160; 13 | 160; 14 | 160; 15 | 160; 16 | 160; 17 | 200; 18 | 200; 20 | 200; 22 | 200; 23 | 200; 24 | 200; 25 | 200; 26 | 200; 5 | 210; 5.5 | 210; 6 | 210; 6.5 | 210; 7 | 210; 8 | 210; 9 | 210; 10 | 210; 11 | 210; 12 | 210; 13 | 210; 14 | 210; 15 | 210; 16 | 210; 18 | 210; 19 | 210; 20 | 210; 22 | 210; 23 | 210; 24 | 210; 25 | 210; 26 | 210; 22 | 250; 24 | 250; 25 | 250; 6 | 260; 8 | 260; 9 | 260; 10 | 260; 11 | 260; 12 | 260; 13 | 260; 14 | 260; 15 | 260; 16 | 260; 18 | 260; 19 | 260; 20 | 260; 22 | 260; 23 | 260; 24 | 260; 25 | 260; 26 | 260; 18 | 300; 19 | 300; 20 | 300; 11 | 310; 12 | 310; 13 | 310; 14 | 310; 15 | 310; 16 | 310; 18 | 310; 20 | 310; 22 | 310; 24 | 310; 25 | 310; 26 | 310; 8 | 350; 10 | 350; 11 | 350; 12 | 350; 13 | 350; 14 | 350; 16 | 350; 18 | 350; 20 | 350; 22 | 350; 23 | 350; 24 | 350; 25 | 350; 26 | 350; 28 | 350; 10 | 400; 11 | 400; 12 | 400; 13 | 400; 14 | 400; 16 | 400; 18 | 400; 20 | 400; 22 | 400; 23 | 400; 24 | 400; 25 | 400; 26 | 400; 28 | 400; 30 | 400; 8 | 450; 10 | 450; 11 | 450; 12 | 450; 13 | 450; 14 | 450; 16 | 450; 18 | 450; 20 | 450; 22 | 450; 23 | 450; 24 | 450; 25 | 450; 26 | 450; 28 | 450; 16 | 500; 20 | 500; 23 | 600; 24 | 600; 25 | 600; 26 | 600; 28 | 600; 22 | 800; 23 | 800; 24 | 800; 25 | 800; 26 | 800; 27 | 800; 28 | 800; 29 | 800; 30 | 800; 10 | 1000; 11 | 1000; 12 | 1000; 13 | 1000; 14 | 1000; 15 | 1000; 16 | 1000; 17 | 1000; 18 | 1000; 19 | 1000; 20 | 1000; 23 | 1000; 24 | 1000; 25 | 1000; 26 | 1000; 27 | 1000; 28 | 1000; 29 | 1000; 30 | 1000
0307-23 | DIN8035 SDS plus shank hammer drill
Dia. | Oal. — verify units and ordered drawing: 4 | 110; 5 | 110; 5.5 | 110; 6 | 110; 6.5 | 110; 7 | 110; 8 | 110; 9 | 110; 10 | 110; 5 | 160; 6 | 160; 6.5 | 160; 7 | 160; 8 | 160; 9 | 160; 10 | 160; 11 | 160; 12 | 160; 13 | 160; 14 | 160; 15 | 160; 16 | 160; 5.5 | 210; 6 | 210; 6.5 | 210; 7 | 210; 8 | 210; 9 | 210; 10 | 210; 11 | 210; 12 | 210; 13 | 210; 14 | 210; 15 | 210; 16 | 210; 18 | 210; 20 | 210; 6 | 260; 7 | 260; 8 | 260; 10 | 260; 11 | 260; 12 | 260; 13 | 260; 14 | 260; 15 | 260; 16 | 260; 18 | 260; 20 | 260; 22 | 260; 24 | 260; 25 | 260; 26 | 260; 8 | 310; 10 | 310; 12 | 310; 13 | 310; 14 | 310; 16 | 310; 18 | 310; 20 | 310; 10 | 360; 12 | 360; 14 | 360; 16 | 360; 18 | 360; 20 | 360; 8 | 450; 10 | 450; 12 | 450; 14 | 450; 16 | 450; 18 | 450; 20 | 450; 22 | 450; 24 | 450; 25 | 450; 26 | 450; 8 | 600; 10 | 600; 14 | 600; 16 | 600; 18 | 600; 20 | 600; 22 | 600; 24 | 600; 25 | 600; 10 | 1000; 12 | 1000; 14 | 1000; 16 | 1000; 18 | 1000; 20 | 1000; 22 | 1000; 24 | 1000; 25 | 1000; 26 | 1000
0307-24 | Diamond vacuum brazed disc for metal
Size — verify units and ordered drawing: 105x5x22.23; 110x5x22.23; 115x5x22.23; 125x5x22.23; 180x5x22.23; 230x5x22.23
0307-25 | Diamond disc Turbo mesh type with flange
Dia. mm | Inner hole — verify units and ordered drawing: 105 | 20; 115 | 22.23; 125 | 22.23; 230 | 22.23; 200 | 25.4; 250 | 25.4
0307-26 | Diamond rope saw
Dia | Beads/m | Length — verify units and ordered drawing: 8.2 | 37 | 3.6; 8.8 | 37 | 3.6
0307-27 | Diamond core drill
Dia.x length — verify units and ordered drawing: 38x150; 52x150; 65x150; 117x150; 127x150; 152x180; 22x400; 25x400; 32x400; 38x400; 44x400; 50x400; 57x400; 63x400; 65x400; 75x400; 90x400; 100x400; 110x400; 115x400; 120x400; 125x400; 150x400; 160x400; 180x400; 200x400; 230x400
0307-28 | diamond disc Continues
Construction / finish choices: Sintered; Hot pressed; confirm availability for each size; Dia. | Hole | T/T | T/H — verify units and ordered drawing: 105 | 20 | 1.6 | 5; 110 | 20 | 1.8 | 5; 115 | 22.23 | 2.0 | 5; 125 | 22.23 | 2.0 | 5; 150 | 22.23 | 2.2 | 5; 200 | 22.23 | 2.4 | 5; 230 | 22.23 | 2.6 | 5; 250 | 25.4 | 2.8 | 5; 300 | 25.4 | 3.0 | 6; 350 | 25.4 | 3.2 | 6
0307-29 | diamond disc Reinforced turbo
Dia. | Hole | T/T | T/H — verify units and ordered drawing: 105 | 20 | 2.6 | 7; 110 | 20 | 2.6 | 7; 115 | 22.23 | 2.6 | 7; 125 | 22.23 | 2.8 | 7; 150 | 22.23 | 3.0 | 7; 180 | 22.23 | 3.0 | 7; 200 | 22.23 | 3.0 | 7; 230 | 22.23 | 3.2 | 7; 250 | 25.4 | 3.2 | 7
0307-30 | Diamond disc general purpose with aluminum flange
Dia. | hole — verify units and ordered drawing: 115 | 22.2; 125 | 22.2; 180 | 22.2; 230 | 22.2
0307-31 | Three-edge SDS-plus hammer drills
Diameter range: 5–30 mm; Overall length range: 110–1000 mm; Standard reference: DIN 8035
0307-32 | SDS-plus rotary hammer drills
Diameter range: 5–30 mm; Overall length range: 110–1000 mm; Standard reference: DIN 8035
0307-33 | Solid-cross SDS-plus hammer drills
Diameter range: 4–25 mm; Overall length range: 110–450 mm
0307-34 | SDS-plus hex hammer drills
Diameter options: 4.0 or 4.8 mm; Overall / working length reference: 182 / 100; confirm dimension unit
0307-35 | SDS plus shank chisel
Dia.x L1 Oal | shank | type — verify units and ordered drawing: 3.2x250 | H14 | Point; 20x250 | H14 | Flat; 40x250 | H14 | Cold; 22x26x250 | H14 | Hollow; 22x250 | H14 | Cranked gouge; 22x250 | H14 | Winged; 27x250 | H14 | Toothed; 40x260 | H14 | Tile; 75x180 | H14 | Cutting
0307-36 | Self-sharpening spade chisels
Interface: SDS-plus; Size: 40 × 250 mm
0307-37 | Jackhammer chisels
Size: 225 × 50.80 mm; Material: 40Cr
0307-38 | Hex-fitting chisels
Size: 277 × 50.80 mm; Material: 40Cr
0307-39 | Diamond disc for granite with aluminum flange
Dia. | hole — verify units and ordered drawing: 115 | 22.2; 125 | 22.2; 180 | 22.2; 230 | 22.2
0307-40 | diamond disc Segmented
Dia. | Hole | T/T | T/H — verify units and ordered drawing: 105 | 20 | 1.8 | 7; 110 | 20 | 1.8 | 7; 115 | 22.23 | 2 | 7; 125 | 22.23 | 2 | 7; 150 | 22.23 | 2.2 | 7; 180 | 22.23 | 2.4 | 7; 200 | 22.23 | 2.4 | 7; 230 | 22.23 | 2.6 | 7; 250 | 25.4 | 2.8 | 7; 300 | 25.4 | 3 | 7; 350 | 25.4 | 3.2 | 7
0307-41 | diamond disc Turbo
Dia. | Hole | T/T | T/H — verify units and ordered drawing: 105 | 20 | 2.6 | 7; 110 | 20 | 2.6 | 7; 115 | 22.23 | 2.6 | 7; 125 | 22.23 | 2.8 | 7; 150 | 22.23 | 3.0 | 7; 180 | 22.23 | 3.0 | 7; 200 | 22.23 | 3.2 | 7; 230 | 22.23 | 3.4 | 7; 250 | 25.4 | 3.4 | 7; 300 | 25.4 | 3.6 | 7; 350 | 25.4 | 3.6 | 7
0307-42 | Diamond disc hot press
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-43 | Optimun distribution diamond disc
Dia. | hole | No.of blade | blade height — verify units and ordered drawing: 300 | 25.4 | 20 | 10; 350 | 25.4 | 24 | 10; 400 | 25.4 | 28 | 10; 450 | 25.4 | 32 | 10; 500 | 25.4 | 36 | 10; 600 | 25.4 | 40 | 10; 300 | 25.4 | 20 | 12; 350 | 25.4 | 24 | 12; 400 | 25.4 | 28 | 12; 450 | 25.4 | 32 | 12; 500 | 25.4 | 36 | 12; 600 | 25.4 | 40 | 12; 300 | 25.4 | 21 | 13; 350 | 25.4 | 25 | 13; 400 | 25.4 | 28 | 13; 450 | 25.4 | 32 | 13; 500 | 25.4 | 36 | 13; 600 | 25.4 | 40 | 13
0307-44 | HSS annular cutter ( 19mm（3/4”）Weldon shank )
Dia. | Cutting | Oal — verify units and ordered drawing: 12.0mm | 35mm | 63mm; 13.0 | 35 | 63; 14.0 | 35 | 63; 15.0 | 35 | 63; 16.0 | 35 | 63; 17.0 | 35 | 63; 18.0 | 35 | 63; 19.0 | 35 | 63; 20.0 | 35 | 63; 21.0 | 35 | 63; 22.0 | 35 | 63; 23.0 | 35 | 63; 24.0 | 35 | 63; 25.0 | 35 | 63; 26.0 | 35 | 63; 27.0 | 35 | 63; 28.0 | 35 | 63; 29.0 | 35 | 63; 30.0 | 35 | 63; 31.0 | 35 | 63; 32.0 | 35 | 63; 33.0 | 35 | 63; 34.0 | 35 | 63; 35.0 | 35 | 63; 36.0 | 35 | 63; 37.0 | 35 | 63; 38.0 | 35 | 63; 39.0 | 35 | 63; 40.0 | 35 | 63; 41.0 | 35 | 63; 42.0 | 35 | 63; 43.0 | 35 | 63; 44.0 | 35 | 63; 45.0 | 35 | 63; 46.0 | 35 | 63; 47.0 | 35 | 63; 48.0 | 35 | 63; 49.0 | 35 | 63; 50.0 | 35 | 63; 51.0 | 35 | 63; 52.0 | 35 | 63; 53.0 | 35 | 63; 54.0 | 35 | 63; 55.0 | 35 | 63; 56.0 | 35 | 63; 57.0 | 35 | 63; 58.0 | 35 | 63; 59.0 | 35 | 63; 60.0 | 35 | 63; 12.0mm | 50mm | 88mm; 13.0 | 50 | 88; 14.0 | 50 | 88; 15.0 | 50 | 88; 16.0 | 50 | 88; 17.0 | 50 | 88; 18.0 | 50 | 88; 19.0 | 50 | 88; 20.0 | 50 | 88; 21.0 | 50 | 88; 22.0 | 50 | 88; 23.0 | 50 | 88; 24.0 | 50 | 88; 25.0 | 50 | 88; 26.0 | 50 | 88; 27.0 | 50 | 88; 28.0 | 50 | 88; 29.0 | 50 | 88; 30.0 | 50 | 88; 31.0 | 50 | 88; 32.0 | 50 | 88; 33.0 | 50 | 88; 34.0 | 50 | 88; 35.0 | 50 | 88; 36.0 | 50 | 88; 37.0 | 50 | 88; 38.0 | 50 | 88; 39.0 | 50 | 88; 40.0 | 50 | 88; 41.0 | 50 | 88; 42.0 | 50 | 88; 43.0 | 50 | 88; 44.0 | 50 | 88; 45.0 | 50 | 88; 46.0 | 50 | 88; 47.0 | 50 | 88; 48.0 | 50 | 88; 49.0 | 50 | 88; 50.0 | 50 | 88; 51.0 | 50 | 88; 52.0 | 50 | 88; 53.0 | 50 | 88; 54.0 | 50 | 88; 55.0 | 50 | 88; 56.0 | 50 | 88; 57.0 | 50 | 88; 58.0 | 50 | 88; 59.0 | 50 | 88; 60.0 | 50 | 88
0307-45 | HSS Annular cutter ( One - touch shank )
Dia. | Cutting | Oal — verify units and ordered drawing: 12.0mm | 35mm | 63mm; 13.0 | 35 | 63; 14.0 | 35 | 63; 15.0 | 35 | 63; 16.0 | 35 | 63; 17.0 | 35 | 63; 18.0 | 35 | 63; 19.0 | 35 | 63; 20.0 | 35 | 63; 21.0 | 35 | 63; 22.0 | 35 | 63; 23.0 | 35 | 63; 24.0 | 35 | 63; 25.0 | 35 | 63; 26.0 | 35 | 63; 27.0 | 35 | 63; 28.0 | 35 | 63; 29.0 | 35 | 63; 30.0 | 35 | 63; 31.0 | 35 | 63; 32.0 | 35 | 63; 33.0 | 35 | 63; 34.0 | 35 | 63; 35.0 | 35 | 63; 36.0 | 35 | 63; 37.0 | 35 | 63; 38.0 | 35 | 63; 39.0 | 35 | 63; 40.0 | 35 | 63; 41.0 | 35 | 63; 42.0 | 35 | 63; 43.0 | 35 | 63; 44.0 | 35 | 63; 45.0 | 35 | 63; 46.0 | 35 | 63; 47.0 | 35 | 63; 48.0 | 35 | 63; 49.0 | 35 | 63; 50.0 | 35 | 63; 51.0 | 35 | 63; 52.0 | 35 | 63; 53.0 | 35 | 63; 54.0 | 35 | 63; 55.0 | 35 | 63; 56.0 | 35 | 63; 57.0 | 35 | 63; 58.0 | 35 | 63; 59.0 | 35 | 63; 60.0 | 35 | 63; 12.0mm | 50mm | 88mm; 13.0 | 50 | 88; 14.0 | 50 | 88; 15.0 | 50 | 88; 16.0 | 50 | 88; 17.0 | 50 | 88; 18.0 | 50 | 88; 19.0 | 50 | 88; 20.0 | 50 | 88; 21.0 | 50 | 88; 22.0 | 50 | 88; 23.0 | 50 | 88; 24.0 | 50 | 88; 25.0 | 50 | 88; 26.0 | 50 | 88; 27.0 | 50 | 88; 28.0 | 50 | 88; 29.0 | 50 | 88; 30.0 | 50 | 88; 31.0 | 50 | 88; 32.0 | 50 | 88; 33.0 | 50 | 88; 34.0 | 50 | 88; 35.0 | 50 | 88; 36.0 | 50 | 88; 37.0 | 50 | 88; 38.0 | 50 | 88; 39.0 | 50 | 88; 40.0 | 50 | 88; 41.0 | 50 | 88; 42.0 | 50 | 88; 43.0 | 50 | 88; 44.0 | 50 | 88; 45.0 | 50 | 88; 46.0 | 50 | 88; 47.0 | 50 | 88; 48.0 | 50 | 88; 49.0 | 50 | 88; 50.0 | 50 | 88; 51.0 | 50 | 88; 52.0 | 50 | 88; 53.0 | 50 | 88; 54.0 | 50 | 88; 55.0 | 50 | 88; 56.0 | 50 | 88; 57.0 | 50 | 88; 58.0 | 50 | 88; 59.0 | 50 | 88; 60.0 | 50 | 88
0307-46 | TCT Annular cutter ( 19mm（3/4”）Weldon shank )
Dia. | Cutting | No.of teeth — verify units and ordered drawing: 12.0 | 25 | 4; 13.0 | 25 | 4; 14.0 | 25 | 4; 15.0 | 25 | 4; 16.0 | 25 | 5; 17.0 | 25 | 5; 18.0 | 25 | 5; 19.0 | 25 | 5; 20.0 | 25 | 6; 21.0 | 25 | 6; 22.0 | 25 | 6; 23.0 | 25 | 6; 24.0 | 25 | 6; 25.0 | 25 | 6; 26.0 | 25 | 7; 27.0 | 25 | 7; 28.0 | 25 | 7; 29.0 | 25 | 8; 30.0 | 25 | 8; 31.0 | 25 | 8; 32.0 | 25 | 8; 33.0 | 25 | 8; 34.0 | 25 | 8; 35.0 | 25 | 9; 36.0 | 25 | 9; 37.0 | 25 | 9; 38.0 | 25 | 10; 39.0 | 25 | 10; 40.0 | 25 | 10; 41.0 | 25 | 10; 42.0 | 25 | 12; 43.0 | 25 | 12; 44.0 | 25 | 12; 45.0 | 25 | 12; 46.0 | 25 | 12; 47.0 | 25 | 12; 48.0 | 25 | 12; 49.0 | 25 | 12; 50.0 | 25 | 12; 51.0 | 25 | 12; 52.0 | 25 | 12; 53.0 | 25 | 12; 54.0 | 25 | 12; 55.0 | 25 | 13; 56.0 | 25 | 13; 57.0 | 25 | 13; 58.0 | 25 | 13; 59.0 | 25 | 13; 60.0 | 25 | 13; 12.0 | 50 | 4; 13.0 | 50 | 4; 14.0 | 50 | 4; 15.0 | 50 | 4; 16.0 | 50 | 5; 17.0 | 50 | 5; 18.0 | 50 | 5; 19.0 | 50 | 5; 20.0 | 50 | 6; 21.0 | 50 | 6; 22.0 | 50 | 6; 23.0 | 50 | 6; 24.0 | 50 | 6; 25.0 | 50 | 6; 26.0 | 50 | 7; 27.0 | 50 | 7; 28.0 | 50 | 7; 29.0 | 50 | 8; 30.0 | 50 | 8; 31.0 | 50 | 8; 32.0 | 50 | 8; 33.0 | 50 | 8; 34.0 | 50 | 8; 35.0 | 50 | 9; 36.0 | 50 | 9; 37.0 | 50 | 9; 38.0 | 50 | 10; 39.0 | 50 | 10; 40.0 | 50 | 10; 41.0 | 50 | 10; 42.0 | 50 | 12; 43.0 | 50 | 12; 44.0 | 50 | 12; 45.0 | 50 | 12; 46.0 | 50 | 12; 47.0 | 50 | 12; 48.0 | 50 | 12; 49.0 | 50 | 12; 50.0 | 50 | 12; 51.0 | 50 | 12; 52.0 | 50 | 12; 53.0 | 50 | 12; 54.0 | 50 | 12; 55.0 | 50 | 13; 56.0 | 50 | 13; 57.0 | 50 | 13; 58.0 | 50 | 13; 59.0 | 50 | 13; 60.0 | 50 | 13
0307-47 | TCT Annular cutter ( One - touch shank )
Dia. | Cutting | No.of teeth — verify units and ordered drawing: 12.0 | 35 | 4; 13.0 | 35 | 4; 14.0 | 35 | 4; 15.0 | 35 | 4; 16.0 | 35 | 5; 17.0 | 35 | 5; 18.0 | 35 | 5; 19.0 | 35 | 5; 20.0 | 35 | 6; 21.0 | 35 | 6; 22.0 | 35 | 6; 23.0 | 35 | 6; 24.0 | 35 | 6; 25.0 | 35 | 6; 26.0 | 35 | 7; 27.0 | 35 | 7; 28.0 | 35 | 7; 29.0 | 35 | 8; 30.0 | 35 | 8; 31.0 | 35 | 8; 32.0 | 35 | 8; 33.0 | 35 | 8; 34.0 | 35 | 8; 35.0 | 35 | 9; 36.0 | 35 | 9; 37.0 | 35 | 9; 38.0 | 35 | 10; 39.0 | 35 | 10; 40.0 | 35 | 10; 41.0 | 35 | 10; 42.0 | 35 | 12; 43.0 | 35 | 12; 44.0 | 35 | 12; 45.0 | 35 | 12; 46.0 | 35 | 12; 47.0 | 35 | 12; 48.0 | 35 | 12; 49.0 | 35 | 12; 50.0 | 35 | 12; 51.0 | 35 | 12; 52.0 | 35 | 12; 53.0 | 35 | 12; 54.0 | 35 | 12; 55.0 | 35 | 13; 56.0 | 35 | 13; 57.0 | 35 | 13; 58.0 | 35 | 13; 59.0 | 35 | 13; 60.0 | 35 | 13; 12.0 | 50 | 4; 13.0 | 50 | 4; 14.0 | 50 | 4; 15.0 | 50 | 4; 16.0 | 50 | 5; 17.0 | 50 | 5; 18.0 | 50 | 5; 19.0 | 50 | 5; 20.0 | 50 | 6; 21.0 | 50 | 6; 22.0 | 50 | 6; 23.0 | 50 | 6; 24.0 | 50 | 6; 25.0 | 50 | 6; 26.0 | 50 | 7; 27.0 | 50 | 7; 28.0 | 50 | 7; 29.0 | 50 | 8; 30.0 | 50 | 8; 31.0 | 50 | 8; 32.0 | 50 | 8; 33.0 | 50 | 8; 34.0 | 50 | 8; 35.0 | 50 | 9; 36.0 | 50 | 9; 37.0 | 50 | 9; 38.0 | 50 | 10; 39.0 | 50 | 10; 40.0 | 50 | 10; 41.0 | 50 | 10; 42.0 | 50 | 12; 43.0 | 50 | 12; 44.0 | 50 | 12; 45.0 | 50 | 12; 46.0 | 50 | 12; 47.0 | 50 | 12; 48.0 | 50 | 12; 49.0 | 50 | 12; 50.0 | 50 | 12; 51.0 | 50 | 12; 52.0 | 50 | 12; 53.0 | 50 | 12; 54.0 | 50 | 12; 55.0 | 50 | 13; 56.0 | 50 | 13; 57.0 | 50 | 13; 58.0 | 50 | 13; 59.0 | 50 | 13; 60.0 | 50 | 13
0307-48 | Adaptor (Arbor extension for Weldon shank)
size — verify units and ordered drawing: 25; 50; 75; 100
0307-49 | Adaptor (MT shank to Weldon shank)
size | Cutting depth | Adaptable | Type — verify units and ordered drawing: MT2x50x19.05 | 50 | 19.05mm(3/4”) | Morse 2; MT3x50x19.05 | 50 | 19.05mm(3/4”) | Morse 3; MT3x75x19.05 | 75 | 19.05mm(3/4”) | Morse 3; MT3x100x19.05 | 100 | 19.05mm(3/4”) | Morse 3; MT4x50x19.05 | 50 | 19.05mm(3/4”) | Morse 4; MT4x75x19.05 | 75 | 19.05mm(3/4”) | Morse 4; MT4x100x19.05 | 100 | 19.05mm(3/4”) | Morse 4; MT5x75x19.05 | 75 | 19.05mm(3/4”) | Morse 5; MT5x100x19.05 | 100 | 19.05mm(3/4”) | Morse 5
0307-50 | Adaptor (Weldon shank to Threaded shank)
Description — verify units and ordered drawing: Adaptor with Weldon shank 3/4”
0307-51 | Adaptor (Thread shank to Weldon shank)
Description — verify units and ordered drawing: Adaptor with thread retainer M18x6 P1.5 for core drills with Weldon shank 3/4”
0307-52 | Adaptor (One-touch shank to Threaded shank)
Description | Unlabelled dimension — verify units and ordered drawing: Adaptor with One-touch shank | Adaptor with One-touch shank; for core drills with thread retainer M18x6 P1.5 | for core drills with thread retainer M18x6 P1.5
0307-53 | Adaptor (One-touch shank to Weldon shank)
Description | Unlabelled dimension — verify units and ordered drawing: Adaptor with One-touch shank | Adaptor with One-touch shank; for core drills with Weldon shank 3/4” | for core drills with Weldon shank 3/4”
0307-54 | Adaptor ( Quick-In shank to Weldon shank)
Description | Unlabelled dimension — verify units and ordered drawing: Adaptor with Quick-In shank | Adaptor with Quick-In shank; for core drills with Weldon shank 3/4” | for core drills with Weldon shank 3/4”
0307-55 | Pilot pins for annular cutter
Size | Type — verify units and ordered drawing: 6.35x77 | straight shank; 6.35x90 | straight shank; 6.35x103 | straight shank; 6.35x130 | straight shank; 7.98x77 | straight shank; 7.98x90 | straight shank; 7.98x103 | straight shank; 7.98x130 | straight shank; 7.98x155 | straight shank; 7.98x162 | straight shank; 6.35x77x4.5 | step; 6.35x90x4.5 | step; 6.35x103x4.5 | step; 6.35x130x4.5 | step; 7.98x77x5.2 | step; 7.98x90x5.2 | step; 7.98x103x5.2 | step; 7.98x130x5.2 | step; 7.98x155x6.8 | step; 7.98x162x6.8 | step; 6.35x77 | thread; 6.35x90 | thread; 6.35x103 | thread; 6.35x130 | thread; 6.35x155 | thread
0307-56 | PCD-tipped board saw blades
Outer diameter / bore / teeth: 305 mm / 30 mm / 96T; Options: Custom geometry and size can be reviewed
0307-57 | PCD-tipped fibre-cement saw blades
Diameter / bore / teeth options: 115 / 10 mm / 4T; 165 / 15.88 mm / 4T; 184 / 15.88 mm / 4T or 5T; 254 / 15.88 mm / 6T or 12T
0307-58 | Left/right PCD laminate saw blades
Outer diameter: 300 mm; 30 mm bore: 46T, left or right; 80 mm bore: 64T, left or right
0307-59 | Woodworking carbide-tipped circular saws
Diameter mm : teeth: 115/136/140 : 18/24/36; 150/165 : 18/24/40; 184/200/210/215 : 24/40/60; 254 : 32/40/60/80; 305/350 : 80/100/120
0307-60 | Flap disc for Aluminum
Dia. | Inner hole | No. pcs — verify units and ordered drawing: 100 | 16 | 56; 100 | 16 | 66; 100 | 16 | 72; 100 | 16 | 80; 115 | 22 | 56; 115 | 22 | 66; 115 | 22 | 72; 115 | 22 | 80; 125 | 22 | 56; 125 | 22 | 66; 125 | 22 | 72; 125 | 22 | 80; 125 | 22 | 90; 150 | 22 | 90; 150 | 22 | 100; 150 | 22 | 110; 180 | 22 | 110; 180 | 22 | 120; 180 | 22 | 130; 180 | 22 | 140
0307-61 | Aluminium oxide sanding mop flap for steel
Dia. | Inner hole | No. pcs — verify units and ordered drawing: 100 | 16 | 56; 100 | 16 | 66; 100 | 16 | 72; 100 | 16 | 80; 115 | 22 | 56; 115 | 22 | 66; 115 | 22 | 72; 115 | 22 | 80; 125 | 22 | 56; 125 | 22 | 66; 125 | 22 | 72; 125 | 22 | 80; 125 | 22 | 90; 150 | 22 | 90; 150 | 22 | 100; 150 | 22 | 110; 180 | 22 | 110; 180 | 22 | 120; 180 | 22 | 130
0307-62 | Fused alumina zirconia sanding mop flap for stainless
Dia. | Inner hole | No.pcs — verify units and ordered drawing: 100 | 16 | 56; 100 | 16 | 66; 100 | 16 | 72; 100 | 16 | 80; 115 | 22 | 56; 115 | 22 | 66; 115 | 22 | 72; 115 | 22 | 80; 125 | 22 | 56; 125 | 22 | 66; 125 | 22 | 72; 125 | 22 | 80; 125 | 22 | 90; 150 | 22 | 90; 150 | 22 | 100; 150 | 22 | 110; 180 | 22 | 110; 180 | 22 | 120; 180 | 22 | 130; 180 | 22 | 140; Dia. | Grit — verify units and ordered drawing: 115 | 40; 115 | 60; 115 | 80; 115 | 100; 115 | 120; 125 | 40; 125 | 60; 125 | 80; 125 | 100; 125 | 120; 180 | 40; 180 | 60; 180 | 80; 180 | 100; 180 | 120
0307-63 | Fibre glass backed tunk disc
Dia. — verify units and ordered drawing: 100; 115; 125; 178
0307-64 | Fibre paper backed disc
Dia. — verify units and ordered drawing: 100; 115; 125; 178
0307-65 | Threaded stripping discs
Diameter options: 100, 115, 125, 180 mm; Thread: M14
0307-66 | Left/right PCD composite blades, narrow bore
Diameter × bore × teeth reference: 300 × 30 × 46T; confirm dimension units
0307-67 | Left/right PCD composite blades, wide bore
Diameter × bore × teeth reference: 300 × 80 × 64T; confirm dimension units
0307-68 | Impact-driver step drills
Point angle: 135°; Range / step count: 4–12 mm / 5 or 9 steps; 4–20 mm / 9 steps; 4–30 mm / 12 steps
0307-69 | Curved bi-metal reciprocating blades
Length / TPI: 200 or 250 mm / 10–14 TPI
0307-70 | Single-flute solid-carbide upcut mills
Cut diameter range: 3.175–10 mm; Shank diameter range: 3.175–12 mm
0307-71 | Coated HSS single-flute end mills
Cut diameter range: 4–10 mm; Shank diameter: 10 mm
0307-72 | Aluminium-profile carbide saw blades
Diameter / bore / teeth: 254 mm / 15.88 mm / 100T
0307-73 | Oscillating blades with different cutting materials
HSS construction: D6A + M2: Ø87 × 1.37 mm × 0.65/0.8 reference; Carbide construction: D6A + carbide: 34 × 40 × 0.94/1.2 reference; Bi-metal constructions: M42 + D6A: 34 × 40 × 1.4 × 0.8; 44 × 50 × 1.4 × 0.8; 44 × 40 × 1.3 × 0.8. M42: 69 × 41 × 1.4 × 0.8. Confirm units for each drawing dimension.
0307-74 | M35 cobalt spiral step drills
Material hardness reference: 66–69 HRC; Range / steps: 3/16–1-1/4 inch / 18 steps
0307-75 | Large spiral-flute HSS step drills
Range / step count: 1/4–2 inch / 10 sizes; Sheet-thickness application reference: Up to 0.2 inch, subject to material/trial review
0307-76 | Spiral-flute tube and sheet drills
Size references: 3–14; 5–20; 5–22.5 × 72; 5–31 × 103; 10–30 × 76; 16–30.5 × 76; 24–40 × 89; 36–50 × 97; 40–61 mm; Sheet thickness reference: Up to 3.0 mm, subject to work-material review
0307-77 | Spiral-groove TiN countersinks
Angle: 90°; Diameter options: 6.3, 8.3, 10.4, 12.4, 16.5, 23, 25, 28, 30, 31, 40 mm
0307-78 | Two-tool Ti-coated HSS step-drill set
Point angle: 118°; Ranges: 1/4–1-3/8 inch; 3/16–7/8 inch
0307-79 | Rotary burrs type J - 60° Conical
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing: 6 | 8 | 55 | 6; 8 | 7 | 57 | 6; 10 | 12 | 58 | 6; 12 | 15 | 60 | 6; 16 | 14 | 62 | 6
0307-80 | ANSI B94.11 M HSS jobber drill
Construction / finish choices: roll ground; confirm availability for each size; Dia. | L1 Oal | L2 Flute — verify units and ordered drawing: 1/64 | 3/4 | 3/16; 1/32 | 1-3/8 | 1/2; 3/64 | 1-3/4 | 3/4; 1/16 | 1-7/8 | 7/8; 5/64 | 2 | 1; 3/32 | 2-1/4 | 1-1/4; 7/64 | 2-5/8 | 1-1/2; 1/8 | 2-3/4 | 1-5/8; 9/64 | 2-7/8 | 1-3/4; 5/32 | 3-1/8 | 2; 11/64 | 3-1/4 | 2-1/8; 3/16 | 3-1/2 | 2-5/6; 13/64 | 3-5/8 | 2-7/16; 7/32 | 3-3/4 | 2-1/2; 15/64 | 3-7/8 | 2-5/8; 1/4 | 4 | 2-3/4; 17/64 | 4-1/8 | 2-7/8; 9/32 | 4-1/4 | 2-15/16; 19/64 | 4-3/8 | 3-1/16; 5/16 | 4-1/2 | 3-3/16; 21/64 | 4-5/8 | 3-5/16; 11/32 | 4-3/4 | 3-7/16; 23/64 | 4-7/8 | 3-1/2; 3/8 | 5 | 3-5/8; 25/64 | 5-1/8 | 3-3/4; 13/32 | 5-1/4 | 3-7/8; 27/64 | 5-3/8 | 3-15/16; 7/16 | 5-1/2 | 4-1/16; 29/64 | 5-5/8 | 4-3/16; 15/32 | 5-3/4 | 4-5/16; 31/64 | 5-7/8 | 4-3/8; 1/2 | 6 | 4-1/2
0307-81 | ANSI B94.11 M screw machine length fully ground stub drill
Construction / finish choices: fully ground; confirm availability for each size; Dia. | L1 Oal | L2 Flute — verify units and ordered drawing: 3/64 | 1-3/8 | 1/2; 1/16 | 1-5/8 | 5/8; 5/64 | 1-11/16 | 11/16; 3/32 | 1-3/4 | 3/4; 7/64 | 1-13/16 | 13/16; 1/8 | 1-7/8 | 7/8; 9/64 | 1-15/16 | 15/16; 5/32 | 2-1/16 | 1; 11/64 | 2-1/8 | 1-1/16; 3/16 | 2-3/16 | 1-1/8; 13/64 | 2-1/4 | 1-3/16; 7/32 | 2-3/8 | 1-1/4; 15/64 | 2-7/16 | 1-5/16; 1/4 | 2-1/2 | 1-3/8; 17/64 | 2-5/8 | 1-7/16; 9/32 | 2-11/16 | 1-1/2; 19/64 | 2-3/4 | 1-9/16; 5/16 | 2-13/16 | 1-5/8; 21/64 | 2-15/16 | 1-11/16; 11/32 | 3 | 1-11/16; 23/64 | 3-1/16 | 1-3/4; 3/8 | 3-1/8 | 1-13/16; 25/64 | 3-1/4 | 1-7/8; 13/32 | 3-5/16 | 1-15/16; 27/64 | 3-3/8 | 2; 7/16 | 3-7/16 | 2-1/16; 29/64 | 3-9/16 | 2-1/8; 15/32 | 3-5/8 | 2-1/8; 31/64 | 3-11/16 | 2-3/16; 1/2 | 3-3/4 | 2-1/4
0307-82 | ANSI B94.11 M HSS number drill
Construction / finish choices: roll forged; fully ground; TiN coated; ZrN coated; Co.M35; Co.M42; confirm availability for each size; number | L1 Oal | L2 Flute — verify units and ordered drawing: 1 | 3-7/8 | 2-5/8; 2 | 3-7/8 | 2-5/8; 3 | 3-3/4 | 2-1/2; 4 | 3-3/4 | 2-1/2; 5 | 3-3/4 | 2-1/2; 6 | 3-3/4 | 2-1/2; 7 | 3-5/8 | 2-7/16; 8 | 3-5/8 | 2-7/16; 9 | 3-5/8 | 2-7/16; 10 | 3-5/8 | 2-7/16; 11 | 3-1/2 | 2-5/16; 12 | 3-1/2 | 2-5/16; 13 | 3-1/2 | 2-5/16; 14 | 3-3/8 | 2-3/16; 15 | 3-3/8 | 2-3/16; 16 | 3-3/8 | 2-3/16; 17 | 3-3/8 | 2-3/16; 18 | 3-1/4 | 2-1/8; 19 | 3-1/4 | 2-1/8; 20 | 3-1/4 | 2-1/8; 21 | 3-1/4 | 2-1/8; 22 | 3-1/8 | 2; 23 | 3-1/8 | 2; 24 | 3-1/8 | 2; 25 | 3 | 1-7/8; 26 | 3 | 1-7/8; 27 | 3 | 1-7/8; 28 | 2-7/8 | 1-3/4; 29 | 2-7/8 | 1-3/4; 30 | 2-3/4 | 1-5/8
0307-83 | ANSI B94.11 M HSS fully ground number stub drill
Construction / finish choices: fully ground; confirm availability for each size; number | L1 Oal | L2 Flute — verify units and ordered drawing: 1 | 2-7/16 | 1-5/16; 2 | 2-7/16 | 1-5/16; 3 | 2-3/8 | 1-1/4; 4 | 2-3/8 | 1-1/4; 5 | 2-3/8 | 1-1/4; 6 | 2-3/8 | 1-1/4; 7 | 2-1/4 | 1-3/16; 8 | 2-1/4 | 1-3/16; 9 | 2-1/4 | 1-3/16; 10 | 2-1/4 | 1-3/16; 11 | 2-1/4 | 1-3/16; 12 | 2-1/4 | 1-3/16; 13 | 2-3/16 | 1-1/8; 14 | 2-3/16 | 1-1/8; 15 | 2-3/16 | 1-1/8; 16 | 2-3/16 | 1-1/8; 17 | 2-3/16 | 1-1/8; 18 | 2-1/8 | 1-1/16; 19 | 2-1/8 | 1-1/16; 20 | 2-1/8 | 1-1/16; 21 | 2-1/8 | 1-1/16; 22 | 2-1/8 | 2; 23 | 2-1/16 | 1; 24 | 2-1/16 | 1; 25 | 2-1/16 | 1; 26 | 2-1/16 | 1; 27 | 2-1/16 | 1; 28 | 1-15/16 | 15/16; 29 | 1-15/16 | 15/16; 30 | 1-15/16 | 15/16
0307-84 | Hex shank HSS fully ground TiN coated jobber drill
Dia. | L1 Oal | L2 Flute — verify units and ordered drawing: 1/16 | 1-7/8 | 7/8; 5/64 | 2 | 1; 3/32 | 2-1/4 | 1-1/4; 7/64 | 2-5/8 | 1-1/2; 1/8 | 2-3/4 | 1-5/8; 9/64 | 2-7/8 | 1-3/4; 5/32 | 3-1/8 | 2; 11/64 | 3-1/4 | 2-1/8; 3/16 | 3-1/2 | 2-5/6; 13/64 | 3-5/8 | 2-7/16; 7/32 | 3-3/4 | 2-1/2; 15/64 | 3-7/8 | 2-5/8; 1/4 | 4 | 2-3/4
0307-85 | ANSI B94.11 M aircraft extension 12” ground number drill
Construction / finish choices: fully ground; confirm availability for each size; Number | Dia. | L2 Flute — verify units and ordered drawing: 1 | 0.2280 | 2-5/8; 2 | 0.2210 | 2-5/8; 3 | 0.2130 | 2-1/2; 4 | 0.2090 | 2-1/2; 5 | 0.2055 | 2-1/2; 6 | 0.2040 | 2-1/2; 7 | 0.2010 | 2-7/16; 8 | 0.1990 | 2-7/16; 9 | 0.1960 | 2-7/16; 10 | 0.1935 | 2-7/16; 11 | 0.1910 | 2-5/16; 12 | 0.1890 | 2-5/16; 13 | 0.1850 | 2-5/16; 14 | 0.1820 | 2-3/16; 15 | 0.1800 | 2-3/16; 16 | 0.1770 | 2-3/16; 17 | 0.1730 | 2-3/16; 18 | 0.1695 | 2-1/8; 19 | 0.1660 | 2-1/8; 20 | 0.1610 | 2-1/8; 21 | 0.1590 | 2-1/8; 22 | 0.1570 | 2; 23 | 0.1540 | 2; 24 | 0.1520 | 2; 25 | 0.1495 | 1-7/8; 26 | 0.1470 | 1-7/8; 27 | 0.1440 | 1-7/8; 28 | 0.1405 | 1-3/4; 29 | 0.1360 | 1-3/4; 30 | 0.1285 | 1-5/8; 31 | 0.1200 | 1-5/8; 32 | 0.1160 | 1-5/8; 33 | 0.1130 | 1-1/2; 34 | 0.1110 | 1-1/2; 35 | 0.1100 | 1-1/2; 36 | 0.1065 | 1-7/16; 37 | 0.1040 | 1-7/16; 38 | 0.1015 | 1-7/16; 39 | 0.0995 | 1-7/16; 40 | 0.0980 | 1-7/16
0307-86 | ANSI B94.11 M HSS letter drill
Construction / finish choices: roll forged; confirm availability for each size; Dia. | L1 Oal | L2 Flute — verify units and ordered drawing: A | 3-7/8 | 2-5/8; B | 4 | 2-3/4; C | 4 | 2-3/4; D | 4 | 2-3/4; E | 4 | 2-3/4; F | 4-1/8 | 2-7/8; G | 4-1/8 | 2-7/8; H | 4-1/8 | 2-7/8; I | 4-1/8 | 2-7/8; J | 4-1/8 | 2-7/8; K | 4-1/4 | 2-15/16; L | 4-1/4 | 2-15/16; M | 4-3/8 | 3-1/16; N | 4-3/8 | 3-1/16; O | 4-1/2 | 3-3/16; P | 4-5/8 | 3-5/16; Q | 4-3/4 | 3-7/16; R | 4-3/4 | 3-7/16; S | 4-7/8 | 3-1/2; T | 4-7/8 | 3-1/2; U | 5 | 3-5/8; V | 5 | 3-5/8; W | 5-1/8 | 3-3/4; X | 5-1/8 | 3-3/4; Y | 5-1/4 | 3-7/8; Z | 5-1/4 | 3-7/8
0307-87 | Taper and deburring countersinkers DIN334 type D 60° HSS
Countersinker | Countersinker | Total | Shank — verify units and ordered drawing: 16.0 | 4.0 | 90.0 | MT1; 20.0 | 5.0 | 106.0 | MT2; 25.0 | 6.3 | 112.0 | MT2; 31.5 | 10.0 | 118.0 | MT2; 40.0 | 12.5 | 150.0 | MT3; 50.0 | 16.0 | 160.0 | MT3; 63.0 | 20.0 | 190.0 | MT4; 80.0 | 25.0 | 200.0 | MT4
0307-88 | Taper and deburring countersinkers Bits “Long” 90° HSS
Countersinker | Countersinker | Total | Shank — verify units and ordered drawing: 6.3 | 1.5 | 38.0 | 1/4”; 8.3 | 2.0 | 38.0 | 1/4”; 10.4 | 2.5 | 41.0 | 1/4”; 12.4 | 2.8 | 42.0 | 1/4”; 16.5 | 3.2 | 47.0 | 1/4”; 20.5 | 3.5 | 48.0 | 1/4”
0307-89 | Flat countersinkers DIN373 HSS with fixed guide
Fine-clearance through hole — thread | countersink d2 mm | pilot d1 mm | shank d3 mm | overall L mm: M3 | 6 | 3.2 | 5.0 | 71; M4 | 8 | 4.3 | 5.0 | 71; M5 | 10 | 5.3 | 8.0 | 80; M6 | 11 | 6.4 | 8.0 | 80; M8 | 15 | 8.4 | 12.5 | 100; M10 | 18 | 10.5 | 12.5 | 100; M12 | 20 | 13.0 | 12.5 | 100; Medium-clearance through hole — thread | countersink d2 mm | pilot d1 mm | shank d3 mm | overall L mm: M3 | 6 | 3.4 | 5.0 | 71; M4 | 8 | 4.5 | 5.0 | 71; M5 | 10 | 5.5 | 8.0 | 80; M6 | 11 | 6.6 | 8.0 | 80; M8 | 15 | 9.0 | 12.5 | 100; M10 | 18 | 11.0 | 12.5 | 100; M12 | 20 | 13.5 | 12.5 | 100; Thread core-hole direction — thread | countersink d2 mm | pilot d1 mm | shank d3 mm | overall L mm: M3 | 6 | 2.5 | 5.0 | 71; M4 | 8 | 3.3 | 5.0 | 71; M5 | 10 | 4.2 | 8.0 | 80; M6 | 11 | 5.0 | 8.0 | 80; M8 | 15 | 6.8 | 12.5 | 100; M10 | 18 | 8.5 | 12.5 | 100; M12 | 20 | 10.2 | 12.5 | 100
0307-90 | Slotted taper and deburring countersinkers 90° HSS
Countersinker nominal ? mm | Countersinker range mm | Head ? d1 mm | Shank ? d2 mm | Total length L mm — verify units and ordered drawing: 1/4 | 1.0-4.0 | 6.35 | 6.35 | 45.0; 2/5 | 2.0-5.0 | 10.0 | 6.0 | 45.0; 510 | 5.0-10.0 | 14.0 | 8.0 | 48.0; 10/15 | 10.0-15.0 | 21.0 | 10.0 | 65.0; 15/20 | 15.0-20.0 | 28.0 | 12.0 | 85.0; 20/25 | 20.0-25.0 | 35.0 | 12.0 | 102.0; 25/30 | 25.0-30.0 | 44.0 | 15.0 | 115.0; 30/35 | 30.0-35.0 | 48.0 | 15.0 | 127.0; 35/40 | 35.0-40.0 | 53.0 | 15.0 | 136.0; 40/50 | 40.0-50.0 | 64.0 | 18.0 | 166.0
0307-91 | Slotted taper and deburring countersinkers 5 flutes
Shank Dia. | size — verify units and ordered drawing: 3/16” | 3/16”; 1/4 | 1/4; 5/16 | 1/4; 3/8 | 1/4; 1/2 | 1/4; 5/8 | 1/2; 3/4 | 1/2; 7/8 | 1/2; 1 | 1/2; 1-1/4 | 3/4; 1-1/2 | 3/4; 1-3/4 | 1; 2 | 1
0307-92 | Hand deburrer DIN335 type C 90° HSS,CBN ground
size | Unlabelled dimension — verify units and ordered drawing: 12.4mm | 31/64”; 15.0mm | 19/32; 16.5mm | 21/32; 20.5mm | 13/16; 25.0mm | 63/64
0307-93 | Taper and deburring countersinkers DIN335 type C 90°
Max Dia. | Min Dia. | Oal. | Shk Dia. — verify units and ordered drawing: 4.3 | 1.3 | 40 | 4; 4.8 | 1.5 | 40 | 4; 5 | 1.5 | 40 | 4; 5.3 | 1.5 | 40 | 4; 5.8 | 1.5 | 45 | 5; 6 | 1.5 | 45 | 5; 6.3 | 1.5 | 45 | 5; 7 | 1.8 | 50 | 6; 7.3 | 1.8 | 50 | 6; 8 | 2 | 50 | 6; 8.3 | 2 | 50 | 6; 9.4 | 2.2 | 50 | 6; 10 | 2.5 | 50 | 6; 10.4 | 2.5 | 50 | 6; 11.5 | 2.8 | 56 | 8; 12.4 | 2.8 | 56 | 8; 13.4 | 2.9 | 56 | 8; 15 | 3.2 | 60 | 10; 16.5 | 3.2 | 60 | 8; 19 | 3.5 | 63 | 10; 20.5 | 3.5 | 63 | 10; 23 | 3.8 | 67 | 10; 25 | 3.8 | 67 | 10; 26 | 3.9 | 71 | 12; 28 | 4 | 71 | 12; 30 | 4.1 | 71 | 12; 31 | 4.2 | 71 | 12; 37 | 4.8 | 90 | 12; 40 | 10 | 80 | 15
0307-94 | Taper and deburring countersinkers DIN334 type C 60° HSS
Max Dia. | Min Dia. | Oal. | Shk Dia. — verify units and ordered drawing: 6.3 | 1.6 | 45 | 5; 8.0 | 2.0 | 50 | 6; 10.0 | 2.5 | 50 | 6; 12.5 | 3.2 | 56 | 8; 16.0 | 4.0 | 63 | 10; 20.0 | 5.0 | 67 | 10; 25.0 | 6.3 | 71 | 10
0307-95 | DIN352 hand tap
Construction / finish choices: Alloy steel; HSS; confirm availability for each size; Code | P | d1 | d2 | d3(h13) | l1 | l2 | a(h12) | l — verify units and ordered drawing: M1 | 0.25 | 1.0 | 2.5 | d1-0.3 | 32.0 | 5.5 | 2.1 | 5.0; M1.1 | 0.25 | 1.1 | 2.5 | d1-0.3 | 32.0 | 5.5 | 2.1 | 5.0; M1.2 | 0.25 | 1.2 | 2.5 | d1-0.3 | 32.0 | 5.5 | 2.1 | 5.0; M1.4 | 0.3 | 1.4 | 2.5 | d1-0.4 | 32.0 | 7.0 | 2.1 | 5.0; M1.6 | 0.35 | 1.6 | 2.5 | d1-0.4 | 32.0 | 8.0 | 2.1 | 5.0; M1.7 | 0.35 | 1.7 | 2.5 | d1-0.4 | 32.0 | 8.0 | 2.1 | 5.0; M1.8 | 0.35 | 1.8 | 2.5 | d1-0.4 | 32.0 | 8.0 | 2.1 | 5.0; M2 | 0.4 | 2.0 | 2.8 | d1-0.5 | 36.0 | 8.0 | 2.1 | 5.0; M2.2 | 0.45 | 2.2 | 2.8 | d1-0.6 | 36.0 | 9.0 | 2.1 | 5.0; M2.3 | 0.4 | 2.3 | 2.8 | d1-0.5 | 36.0 | 9.0 | 2.1 | 5.0; M2.5 | 0.45 | 2.5 | 2.8 | d1-0.6 | 40.0 | 9.0 | 2.1 | 5.0; M2.6 | 0.45 | 2.6 | 2.8 | d1-0.6 | 40.0 | 9.0 | 2.1 | 5.0; M3.0 | 0.5 | 3.0 | 3.5 | d1-0.6 | 40.0 | 11.0 | 2.7 | 6.0; M3.5 | 0.6 | 3.5 | 4.0 | d1-0.7 | 45.0 | 13.0 | 3.0 | 6.0; M4 | 0.7 | 4.0 | 4.5 | d1-0.8 | 45.0 | 13.0 | 3.4 | 6.0; M4.5 | 0.75 | 4.5 | 6.0 | d1-0.9 | 50.0 | 16.0 | 4.9 | 8.0; M5 | 0.8 | 5.0 | 6.0 | d1-1.0 | 50.0 | 16.0 | 4.9 | 8.0; M6 | 1.0 | 6.0 | 6.0 | d1-1.2 | 50.0 | 19.0 | 4.9 | 8.0; M7 | 1.0 | 7.0 | 6.0 | d1-1.2 | 50.0 | 19.0 | 4.9 | 8.0; M8 | 1.25 | 8.0 | 6.0 | d1-1.5 | 56.0 | 22.0 | 4.9 | 8.0; M9 | 1.25 | 9.0 | 7.0 | d1-1.5 | 56.0 | 22.0 | 5.5 | 8.0; M10 | 1.5 | 10.0 | 7.0 | d1-1.8 | 70.0 | 24.0 | 5.5 | 8.0; M11 | 1.5 | 11.0 | 8.0 | d1-1.8 | 70.0 | 24.0 | 6.2 | 9.0; M12 | 1.75 | 12.0 | 9.0 | d1-2.1 | 75.0 | 29.0 | 7.0 | 10.0; M14 | 2.0 | 14.0 | 11.0 | d1-2.4 | 80.0 | 30.0 | 9.0 | 12.0; M16 | 2.0 | 16.0 | 12.0 | d1-2.4 | 80.0 | 32.0 | 9.0 | 12.0; M18 | 2.5 | 18.0 | 14.0 | d1-3.0 | 95.0 | 40.0 | 11.0 | 14.0; M20 | 2.5 | 20.0 | 16.0 | d1-3.0 | 95.0 | 40.0 | 12.0 | 15.0; M22 | 2.5 | 22.0 | 18.0 | d1-3.0 | 100.0 | 40.0 | 14.5 | 17.0; M24 | 3.0 | 24.0 | 18.0 | d1-3.6 | 110.0 | 50.0 | 14.5 | 17.0; M27 | 3.0 | 27.0 | 20.0 | d1-3.6 | 110.0 | 50.0 | 16.0 | 19.0; M30 | 3.5 | 30.0 | 22.0 | d1-4.2 | 125.0 | 56.0 | 18.0 | 21.0; M33 | 3.5 | 33.0 | 25.0 | d1-4.2 | 125.0 | 56.0 | 20.0 | 23.0; M36 | 4.0 | 36.0 | 28.0 | d1-4.8 | 150.0 | 63.0 | 22.0 | 25.0; M39 | 4.0 | 39.0 | 32.0 | d1-4.8 | 150.0 | 63.0 | 24.0 | 27.0; M42 | 4.5 | 42.0 | 32.0 | d1-5.4 | 150.0 | 63.0 | 24.0 | 27.0; M45 | 4.5 | 45.0 | 36.0 | d1-5.4 | 160.0 | 70.0 | 29.0 | 32.0; M48 | 5.0 | 48.0 | 36.0 | d1-6.0 | 180.0 | 75.0 | 29.0 | 32.0; M52 | 5.0 | 52.0 | 40.0 | d1-6.0 | 180.0 | 75.0 | 32.0 | 35.0; M56 | 5.5 | 56.0 | 45.0 | d1-6.6 | 200.0 | 85.0 | 35.0 | 38.0; M60 | 5.5 | 60.0 | 45.0 | d1-6.6 | 200.0 | 85.0 | 35.0 | 38.0; M64 | 6.0 | 64.0 | 50.0 | d1-7.2 | 220.0 | 90.0 | 39.0 | 38.0; M68 | 6.0 | 68.0 | 50.0 | d1-7.2 | 220.0 | 90.0 | 39.0 | 38.0
0307-96 | Hand tap alloy imperial size standard
Tap size — verify units and ordered drawing: 1/8; 5/32; 5/16; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 7/8; 1
0307-97 | Hand tap HSS imperial size standard
Tap size — verify units and ordered drawing: 1/8; 5/32; 5/16; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 7/8; 1
0307-98 | DIN371 HSS machine tap
thread size | pitch mm | thread core hole mm | total length mm | thread length mm | ? shank mm — verify units and ordered drawing: M2 | 0.4 | 1.6 | 45 | 8 | 2.8; M2.5 | 0.45 | 2.05 | 50 | 9 | 2.8; M3 | 0.5 | 2.5 | 56 | 10 | 3.5; M4 | 0.7 | 3.3 | 63 | 12 | 4.5; M5 | 0.8 | 4.2 | 70 | 13 | 6.0; M6 | 1.0 | 5 | 80 | 13 | 6.0; M8 | 1.25 | 6.8 | 90 | 18 | 8.0; M10 | 1.5 | 8.5 | 100 | 20 | 10.0
0307-99 | DIN376 HSS machine tap
Construction / finish choices: straight flute; spiral flute; confirm availability for each size; thread size | pitch mm | thread core hole mm | total length mm | thread length mm | shank mm — verify units and ordered drawing: M3 | 0.5 | 2.5 | 56 | 10 | 2.2; M4 | 0.7 | 3.3 | 63 | 12 | 2.8; M5 | 0.8 | 4.2 | 70 | 13 | 3.5; M6 | 1.0 | 5.0 | 80 | 13 | 4.5; M8 | 1.25 | 6.8 | 90 | 18 | 6.0; M10 | 1.5 | 8.5 | 100 | 20 | 7.0; M12 | 1.75 | 10.2 | 110 | 22 | 9.0; M14 | 2.0 | 12 | 110 | 25 | 11.0; M16 | 2.0 | 14 | 110 | 28 | 12.0; M18 | 2.5 | 15.5 | 125 | 30 | 14.0; M20 | 2.5 | 17.5 | 140 | 30 | 16.0; M22 | 2.5 | 19.5 | 140 | 30 | 18.0; M24 | 3.0 | 21 | 160 | 32 | 18.0; M27 | 3.0 | 24 | 160 | 38 | 20.0; M30 | 3.5 | 26.5 | 180 | 45 | 22.0
0307-100 | Machine tap HSS imperial size ground pitch
Tap size — verify units and ordered drawing: 1/8; 5/32; 5/16; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 7/8; 1
0307-101 | Screw extractor
No. size | For screw | For screw — verify units and ordered drawing: 1 | M3-M6 | 1/8 - 15/64”; 2 | M6-M8 | 15/64 - 5/16”; 3 | M8-M10 | 5/16 - 3/8”; 4 | M11-M14 | 7/16 - 9/16”; 5 | M14-M16 | 9/16 - 5/8”; 6 | M16-M18 | 5/8 - 23/32”; 7 | M24-M34 | 15/16 - 1-11/32”; 8 | M34-M44 | 1-11/32 - 1-23/32”; 9 | M44-M53 | 1-23/32 - 2-3/32”; 10 | M53-M63 | 2-3/32 - 2-15/32”
0307-102 | Combination drill&taps
Size | Pitch | Oal. | thread L | Drill Length | Drill Dia. — verify units and ordered drawing: M3 | 0.5 | 51 | 7.0 | 5.0 | 2.5; M4 | 0.7 | 54 | 8.5 | 6.0 | 3.3; M5 | 0.8 | 57 | 10.0 | 7.0 | 4.2; M6 | 1.0 | 60 | 12.0 | 8.0 | 5.0; M8 | 1.25 | 68 | 15.0 | 11.0 | 6.8; M10 | 1.50 | 75 | 17.0 | 15.0 | 8.5; 1/4 | 20 | 2-1/2 | 15/16 | 17/32 | 0.2010; 1/4 | 28 | 2-1/2 | 15/16 | 17/32 | 0.2175; 5/16 | 18 | 3 | 1-1/8 | 11/16 | 0.2570; 5/16 | 24 | 3 | 1-1/8 | 11/16 | 0.2720; 3/8 | 16 | 3-1/2 | 1-1/4 | 13/16 | 0.3125; 7/16 | 14 | 3-7/8 | 1-7/16 | 1 | 0.3680; 7/16 | 20 | 3-7/8 | 1-7/16 | 1 | 0.3890; 1/2 | 13 | 4-1/4 | 1-21/32 | 1-1/8 | 0.4250; 1/2 | 20 | 4-1/4 | 1-21/32 | 1-1/8 | 0.4510
0307-103 | Metric thread-repair cutting tools
Size | Pitch | Core hole — verify units and ordered drawing: M3 | 0.5 | 2.50; M4 | 0.7 | 3.30; M5 | 0.8 | 4.20; M6 | 1.0 | 5.0; M8 | 1.25 | 6.8
0307-104 | HSS-G fully ground threading-bits
Size | Pitch | Core hole — verify units and ordered drawing: M3 | 0.5 | 2.50; M4 | 0.7 | 3.30; M5 | 0.8 | 4.20; M6 | 1.0 | 5.0; M8 | 1.25 | 6.8
0307-105 | T - type-tap wrench with ratchet
Size | Length | For hand M | Tape size Ww | G — verify units and ordered drawing: 1# | 85.0 | M3-M10 | 1/8 - 3/8 | —; 2# | 100.0 | M5-M12 | 7/32 - 1/2 | 6-1/8; 10# | 250.0 | M3-M10 | 1/8 - 3/8 | —; 20# | 300.0 | M5-M12 | 7/32 - 1/2 | 6-1/8
0307-106 | DIN1814 adjustable tap wrench
size | For tap size Metric | UNC/UNF | Pipe | Length — verify units and ordered drawing: 0 | M1-M8 | 1/16 - 5/16 | — | 125; 1 | M3-M10 | 1/8 - 3/8 | — | 180; 1-1/2 | M3-M12 | 1/8 - 1/2 | G1/8 | 200; 2 | M4-M12 | 3/16 - 5/8 | G1/8-G3/8 | 280; 3 | M5-M20 | 1/4 - 3/4 | G1/8-G1/2 | 375; 4 | M10-M27 | 3/8 - 1 | G1/8-G3/4 | 500; 5 | M14-M33 | 5/8 - 1-1/4 | G1/4-G1 | 750; 6 | M18-M42 | 3/4 - 1-1/2 | G1/4-G1-1/4 | 1000; 7 | M25-M52 | 7/8 - 2 | G5/8-G2-1/4 | 1250
0307-107 | Screw-hole / Sheet metal punch
Dia. | Draw-in bolt metric fine thread — verify units and ordered drawing: 12.7 | MF8; 15.2 | MF10; 16 | MF10; 16.5 | MF10; 18.6 | MF10; 19 | MF10; 20 | MF10; 20.4 | MF10; 21 | MF10; 22 | MF10; 22.5 | MF10; 23 | MF10; 24 | MF10; 25 | MF10; 25.4 | MF10; 26 | MF10; 27 | MF10; 28.3 | MF12; 29 | MF12; 30 | MF12; 30.5 | MF12; 31 | MF12; 31.7 | MF12; 32 | MF12; 32.5 | MF12; 33 | MF12; 34 | MF12; 35 | MF12; 36 | MF12; 37 | MF12; 38 | MF12; 40 | MF12; 40.5 | MF16; 42 | MF16; 43 | MF16; 45 | MF16; 47 | MF16; 50 | MF16; 50.5 | MF16; 51 | MF16; 53 | MF16; 54 | MF16; 55 | MF16; 60 | MF16; 61.5 | MF16; 63.5 | MF16
0307-108 | Bi-metal hole saw Metric / Inch
Metric hole-saw diameters (mm): 14, 16, 17, 19, 20, 21, 22, 24, 25, 27, 28, 29, 30, 32, 33, 35, 37, 38, 40, 41, 43, 44, 46, 48, 51, 52, 54, 57, 59, 60, 64, 65, 67, 68, 70, 73, 76, 79, 83, 86, 89, 92, 95, 98, 102, 105, 108, 111, 114, 121, 127, 133, 140, 146, 152, 160, 168, 178, 200, 210; Imperial hole-saw diameters (inch): 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-9/16, 1-5/8, 1-11/16, 1-3/4, 1-13/16, 1-7/8, 2, 2-1/16, 2-1/8, 2-1/4, 2-5/16, 2-3/8, 2-1/2, 2-9/16, 2-5/8, 2-11/16, 2-3/4, 2-7/8, 3, 3-1/8, 3-1/4, 3-3/8, 3-1/2, 3-5/8, 3-3/4, 3-7/8, 4, 4-1/8, 4-1/4, 4-3/8, 4-1/2, 4-3/4, 5, 5-1/4, 5-1/2, 5-3/4, 6, 6-19/64, 6-1/2, 6-39/64, 7, 7-7/8, 8, 8-3/8; Material choices: M3 or M42 cutting-material directions; confirm exact size and construction
0307-109 | Arbors for Bi-metal hole saw
Shank size | Thread size | Chunk size | Fits size — verify units and ordered drawing: 1/4 Round | 1/2--20 UNF | 1/4 | 9/16--1-3/16; 3/8 Hex | 1/2--20 UNF | 3/8 | 9/16--1-3/16; 7/16 Hex | 1/2--20 UNF | 1/2 | 9/16--1-3/16; 7/16 Hex | 5/8--18 UNF | 1/2 | 1-1/4--8-17/64; 3/8 Hex | 5/8--18 UNF | 3/8 | 1-1/4--8-17/64; 5/8 Hex | 5/8--18 UNF | 3/4 | 1-1/4--8-17/64; SDS Plus shank | 1/2--20 UNF | SDS | 9/16--1-3/16; SDS Plus shank | 5/8--18 UNF | SDS | 1-1/4--8-17/64; SDS Plus shank | 5/8--18 UNF | SDS | 1-1/4--7-7/8; Accessories: Thread adapter: 1/2-20 arbor to 5/8-18 hole-saw connection; nominal extension lengths 5-1/2, 10, 12 or 18 inch for 7/16- or 3/8-inch arbors; ejector spring and hex key. Confirm exact extension drawing and spring/pilot fit.; Additional arbor directions: 7/16-inch hex with 1/2-20 UNF or 5/8-18 UNF connection; confirm chuck and hole-saw range separately.
0307-110 | Bi-metal hole saw with hexagon built in shank
size | Cutting depth — verify units and ordered drawing: 20 | 40; 22 | 40; 25 | 40; 29 | 40; 32 | 40; 35 | 40; 40 | 40; 45 | 40
0307-111 | Bi-metal sheet metal impact hole saw
size | size — verify units and ordered drawing: 16 | 5/8”; 19 | 3/4”; 20 | 25/32”; 22 | 7/8”; 25 | 1”; 27 | 1-1/16”; 29 | 1-1/8”; 30 | 1-3/16”; 32 | 1-1/4”; 35 | 1-3/8”; 38 | 1-1/2”
0307-112 | TCT hole saw
Dia.mm — verify units and ordered drawing: 12; 13; 14; 15; 16; 17; 19; 20; 21; 22; 24; 25; 28; 30; 32; 35; 38; 40; 42; 45; 48; 50; 52; 55; 58; 60; 65; 70; 75; 80; 85; 90; 95; 100
0307-113 | HSS hole saw
Dia.mm — verify units and ordered drawing: 12; 13; 14; 15; 16; 18; 19; 20; 21; 22; 23; 24; 25; 26; 27; 28; 29; 30; 31; 32; 33; 34; 35; 37; 38; 39; 40; 41; 42; 45; 50; 55; 60; 65; 70; 75; 80; 85; 90; 95; 100
0307-114 | Tungsten carbide tipped hole saw
Dia. metric — verify units and ordered drawing: 14; 16; 17; 19; 20; 21; 22; 24; 25; 27; 28; 29; 30; 32; 33; 35; 37; 38; 40; 41; 43; 44; 46; 48; 51; 52; 54; 57; 59; 60; 64; 65; 67; 68; 70; 73; 76; 79; 83; 86; 89; 92; 95; 98; 102; 105; 108; 111; 114; 121; 127; 133; 140; 146; 152; 160; 168; 178; 200
0307-115 | Bi-metal hole saw Metric / Inch
Construction / finish choices: M42; confirm availability for each size; Dia. mm — verify units and ordered drawing: 14; 16; 17; 19; 20; 21; 22; 24; 25; 27; 28; 29; 30; 32; 33; 35; 37; 38; 40; 41; 43; 44; 46; 48; 51; 52; 54; 57; 59; 60; 64; 65; 67; 68; 70; 73; 76; 79; 83; 86; 89; 92; 95; 98; 102; 105; 108; 111; 114; 121; 127; 133; 140; 146; 152; 160; 168; 178; 200; 210
0307-116 | TCT multi cutting saw blade spaced teeth
size — verify units and ordered drawing: 185; 210; 255; 355
0307-117 | TCT multi cutting saw blade
Dia. outer | Core thick | Teeth no. — verify units and ordered drawing: 160 | 1.8 | 40; 185 | 1.8 | 60; 190 | 1.8 | 60; 210 | 1.8 | 60; 250 | 2.0 | 60; 300 | 2.2 | 60; 315 | 2.2 | 60; 350 | 2.2 | 60; 400 | 2.5 | 80; 450 | 2.5 | 80; 500 | 2.5 | 80; 600 | 3.0 | 80; 700 | 3.0 | 80
0307-118 | Circular saw blade for Aluminum working
Outer Dia. | Outer Dia. | Kerf | Core thick | Hole Dia. | Teeth No. — verify units and ordered drawing: 230 | 9” | 2.6 | 1.6 | 20/25.4 | 80; 230 | 9 | 2.6 | 1.6 | 20/25.4 | 100; 250 | 10 | 2.8 | 1.6/1.8 | 25.4/30 | 80; 250 | 10 | 2.8 | 1.6/1.8 | 25.4/30 | 100; 250 | 10 | 2.8 | 1.6/1.8 | 25.4/30 | 120; 300 | 12 | 3.1 | 1.8/2.0 | 25.4/30 | 100; 300 | 12 | 3.1 | 1.8/2.0 | 25.4/30 | 120; 350 | 14 | 3.1 | 1.8/2.0 | 25.4/30 | 100; 350 | 14 | 3.1 | 1.8/2.0 | 25.4/30 | 120; 400 | 16 | 3.1 | 1.8/2.0 | 25.4/30 | 100; 400 | 16 | 3.1 | 1.8/2.0 | 25.4/30 | 120; 400 | 16 | 3.1 | 1.8/2.0 | 25.4/30 | 140; 450 | 18 | 3.1 | 1.8/2.0 | 25.4/30 | 100; 450 | 18 | 3.1 | 1.8/2.0 | 25.4/30 | 120; 450 | 18 | 3.1 | 1.8/2.0 | 25.4/30 | 140
0307-119 | HSS circular saw blade
Blade geometry — diameter | plate thickness | bore | teeth; units to ordered drawing: 225 | 2.0 | 40 | 120; 225 | 2.0 | 32 | 180; 250 | 2.0 | 32 | 128; 250 | 2.0 | 32 | 160; 250 | 2.0 | 32 | 180; 250 | 2.0 | 32 | 200; 250 | 2.5 | 32 | 160; 250 | 2.5 | 32 | 200; 275 | 2.5 | 32 | 140; 275 | 2.5 | 32 | 180; 275 | 2.5 | 32 | 220; 275 | 2.5 | 40 | 220; 300 | 2.5 | 32 | 160; 300 | 2.5 | 32 | 220; 315 | 2.5 | 32 | 160; 315 | 2.5 | 32 | 200; 315 | 2.5 | 40 | 200; 315 | 2.5 | 32 | 240; 350 | 2.5 | 32 | 180; Tooth form directions: Coarse, medium or fine; choose the specific blade; Packing and fit: Mounting holes, supporting flange and runout require the approved machine drawing; no inferred dimensions.
0307-120 | Bi-Metal hacksaw blade
thickness mm | TPI — verify units and ordered drawing: 0.63 | 14; 0.63 | 18; 0.63 | 24; 0.63 | 32
0307-121 | Double edge hacksaw blade
size — verify units and ordered drawing: 300x12.5x0.63mmx24T/32T; 300x25.0x0.63mmx24T/32T
0307-122 | HSS/Bi-metal power hack saw blade
Width | Thick. | TPI — verify units and ordered drawing: 25 | 1.25 | 14/10; 25 | 1.6 | 14/10; 32 | 1.25 | 14/10; 32 | 1.6 | 14/10; 32 | 1.6 | 10/6; 35 | 1.8 | 6/4; 32 | 1.6 | 6/4; 38 | 1.2 | 6/4; 38 | 1.8 | 6/4; 40 | 2 | 6/4; 40 | 2.5 | 6/4
0307-123 | HSS hacksaw blade ( HCS available )
thickness mm | TPI — verify units and ordered drawing: 0.63 | 14; 0.63 | 18; 0.63 | 24; 0.63 | 32
0307-124 | Reamer tools
Tipped Carbide Parallel Machine Reamer — d | d1 | L — verify units and ordered drawing: 6 | 5.6 | 93; 7 | 7.1 | 109; 8 | 8 | 117; 9 | 9 | 125; 10 | 10 | 133; 11 | 10 | 142; 12 | 10 | 151; 13 | 10 | 151; 14 | 12.5 | 160; 15 | 12.5 | 162; 16 | 12.5 | 170; 17 | 14 | 175; 18 | 14 | 182; 19 | 16 | 189; 20 | 16 | 195; Taper Shank Bridge Reamer (ANSI) — size | I | L — verify units and ordered drawing: 7/16 | 4-3/8 | 8-1/4; 1/2 | 5-1/8 | 9; 9/16 | 5-1/8 | 9; 5/8 | 6-1/8 | 10; 11/16 | 7-1/8 | 11-3/4; 3/4 | 7-3/8 | 12; 13/16 | 7-3/8 | 12; 7/8 | 7-3/8 | 12; 15/16 | 7-3/8 | 12; 1 | 7-3/8 | 12; 1-1/16 | 7-3/8 | 12; 1-1/8 | 7-3/8 | 12; 1-3/16 | 7-3/8 | 12; 1-1/4 | 7-3/8 | 12; 1-5/8 | 7-3/8 | 12; Square Shank Morse Taper Reamer (ANSI) — size | I | L — verify units and ordered drawing: 0 | 2-1/4 | 3-3/4; 1 | 3 | 5; 2 | 3-1/2 | 6; 3 | 4-1/4 | 7-1/4; 4 | 5-1/4 | 8-1/2; 5 | 6-1/4 | 9-3/4; Hand Reamer (ANSI) — size | I | L — verify units and ordered drawing: 1/8 | 1-1/2 | 3; 9/64 | 1-5/8 | 3-1/4; 5/32 | 1-5/8 | 3-1/4; 11/64 | 1-3/4 | 3-1/2; 3/16 | 1-3/4 | 3-1/2; 13/64 | 1-7/8 | 3-3/4; 7/32 | 1-7/8 | 3-3/4; 15/64 | 2 | 4; 1/4 | 2 | 4; 17/64 | 2-1/8 | 4-1/4; 9/32 | 2-1/8 | 4-1/4; 19/64 | 2-1/4 | 4-1/2; 5/16 | 2-1/4 | 4-1/2; 21/64 | 2-3/8 | 4-3/4; 11/32 | 2-3/8 | 4-3/4; 23/64 | 2-1/2 | 5; 3/8 | 2-1/2 | 5; 25/64 | 2-5/8 | 5-5/8; 13/32 | 2-5/8 | 5-5/8; 27/64 | 2-3/4 | 5-1/2; 7/16 | 2-3/4 | 5-1/2; 29/64 | 2-7/8 | 5-3/4; 15/32 | 2-7/8 | 5-3/4; 31/64 | 3 | 6; 1/2 | 3 | 6; 17/32 | 3-1/8 | 6-1/4; 9/16 | 3-1/4 | 6-1/2; 19/32 | 3-3/8 | 6-3/4; 5/8 | 3-1/2 | 7; 21/32 | 3-11/16 | 7-3/8; 11/16 | 3-7/8 | 7-7/8; 23/32 | 4-1/16 | 8-1/8; 3/4 | 4-3/16 | 8-3/8; 7/8 | 4-7/8 | 9-3/4; 1 | 5-7/16 | 10-7/8; 1-1/8 | 5-13/16 | 11-5/8; 1-1/4 | 6-1/8 | 12-1/4; 1-3/8 | 6-5/16 | 12-5/8; 1-1/2 | 6-1/2 | 13; Taper Shank Reamer (ANSI) — size | I | L — verify units and ordered drawing: 1/4 | 1-1/2 | 6; 5/16 | 1-1/2 | 6; 3/8 | 1-3/4 | 7; 7/16 | 1-3/4 | 7; 1/2 | 2 | 8; 17/32 | 2 | 8; 9/16 | 2 | 8; 19/32 | 2 | 8; 5/8 | 2-1/4 | 9; 21/32 | 2-1/4 | 9; 11/16 | 2-1/4 | 9; 23/32 | 2-1/4 | 9; 3/4 | 2-1/4 | 9-1/2; 25/32 | 2-1/2 | 9-1/2; 13/16 | 2-1/2 | 9-1/2; 27/32 | 2-1/2 | 9-1/2; 7/8 | 2-5/8 | 10; 29/32 | 2-5/8 | 10; 15/16 | 2-5/8 | 10; 31/32 | 2-5/8 | 10; 1 | 2-3/4 | 10-1/2; 1-1/16 | 2-3/4 | 10-1/2; 1-1/8 | 2-7/8 | 11; 1-3/16 | 2-7/8 | 11; 1-1/4 | 3 | 11-1/2; 1-5/16 | 3 | 11-1/2; 1-3/8 | 3-1/4 | 12; 1-7/16 | 3-1/4 | 12; 1-1/2 | 3-1/2 | 12-1/2; Square Shank Reamer (ANSI) — size | I | L — verify units and ordered drawing: 11/16 | 3-7/8 | 7-3/4; Pin Rramer (ANSI) — size | I | L — verify units and ordered drawing: 7/0 | 13/16 | 1-13/16; 6/0 | 15/16 | 1-15/16; 5/0 | 1-3/16 | 2-3/16; 4/0 | 1-5/16 | 2-5/16; 3/0 | 1-5/16 | 2-5/16; 2/0 | 1-9/16 | 2-9/16; 0 | 1-11/16 | 2-15/16; 1 | 1-11/16 | 2-15/16; 2 | 1-15/16 | 3-3/16; 3 | 2-5/16 | 3-11/16; 4 | 2-9/16 | 4-1/16; 5 | 2-13/16 | 4-5/16; 6 | 3-11/16 | 5-7/16; 7 | 4-7/16 | 6-5/16; 8 | 5-3/16 | 7-3/16; 9 | 6-1/16 | 8-5/16; 10 | 6-13/16 | 9-5/16; Parallel Rramer (ANSI) — D | A | B — verify units and ordered drawing: 1/8 | 7/8 | 3-1/2; 3/16 | 1-1/8 | 4-1/2; 3/4 | 2-1/2 | 9-1/2; Taper-shank car reamer direction — size | I | L — verify units and ordered drawing: 5/16 | 2-3/4 | 5-11/16; 3/8 | 2-3/4 | 5-11/16; 7/16 | 3-1/2 | 6-15/16; 1/2 | 4 | 7-9/16; 9/16 | 4 | 7-9/16; 5/8 | 4-1/2 | 8-1/16; 11/16 | 4-1/2 | 8-13/16; 3/4 | 5 | 9-1/2; 13/16 | 5 | 9-1/2; 15/16 | 5 | 9-1/2
0307-125 | DIN327 HSS 2 flutes end mills
Construction / finish choices: Ground; TiN; ZrN; M35; M42; Solid Carbide; confirm availability for each size; Dia.mill | Dia.Shk | L2 Flute | L1 Oal — verify units and ordered drawing: 1.0 | 6 | 3 | 47; 1.5 | 6 | 4 | 48; 2 | 6 | 4 | 48; 2.5 | 6 | 5 | 49; 3 | 6 | 5 | 49; 4 | 6 | 7 | 51; 4.5 | 6 | 8 | 52; 5 | 6 | 8 | 52; 5.5 | 6 | 8 | 52; 6 | 6 | 8 | 52; 6.5 | 10 | 10 | 60; 7 | 10 | 10 | 60; 7.5 | 10 | 11 | 61; 8 | 10 | 11 | 61; 8.5 | 10 | 13 | 63; 9 | 10 | 13 | 63; 10 | 10 | 13 | 63; 11 | 12 | 16 | 73; 12 | 12 | 16 | 73; 13 | 12 | 16 | 73; 14 | 12 | 16 | 73; 15 | 12 | 16 | 73; 16 | 16 | 19 | 79; 17 | 16 | 19 | 79; 18 | 16 | 19 | 79; 20 | 20 | 22 | 88; 21 | 20 | 22 | 88; 22 | 20 | 22 | 88; 23 | 20 | 22 | 88; 24 | 25 | 26 | 102; 25 | 25 | 26 | 102; 26 | 25 | 26 | 102; 28 | 25 | 26 | 102; 30 | 25 | 26 | 102; 32 | 32 | 32 | 112
0307-126 | DIN844 HSS 4 flutes end mills
Construction / finish choices: Ground; TiN; ZrN; M35; M42; Solid Carbide; confirm availability for each size; Dia.mill | Dia.Shk | L2 Flute | L1 Oal — verify units and ordered drawing: 1.5 | 6 | 7 | 51; 2 | 6 | 7 | 51; 3 | 6 | 8 | 52; 4 | 6 | 11 | 55; 5 | 6 | 13 | 57; 6 | 6 | 13 | 57; 7 | 10 | 16 | 66; 8 | 10 | 19 | 69; 9 | 10 | 19 | 69; 10 | 10 | 22 | 72; 11 | 12 | 22 | 79; 12 | 12 | 26 | 83; 13 | 12 | 26 | 83; 14 | 12 | 26 | 83; 15 | 12 | 26 | 83; 16 | 16 | 32 | 92; 17 | 16 | 32 | 92; 18 | 16 | 32 | 92; 20 | 20 | 38 | 104; 21 | 20 | 38 | 104; 22 | 20 | 38 | 104; 23 | 20 | 38 | 104; 24 | 25 | 45 | 121; 25 | 25 | 45 | 121; 26 | 25 | 45 | 121; 28 | 25 | 45 | 121; 30 | 25 | 45 | 121; 32 | 32 | 53 | 133
0307-127 | DIN844 HSS 4 flutes long end mills
Construction / finish choices: Ground; TiN; ZrN; M35; M42; Solid Carbide; confirm availability for each size; Dia.mill | Dia.Shk | L2 Flute | L1 Oal — verify units and ordered drawing: 2 | 6 | 10 | 54; 3 | 6 | 12 | 56; 4 | 6 | 19 | 63; 5 | 6 | 24 | 68; 6 | 6 | 24 | 68; 7 | 10 | 30 | 80; 8 | 10 | 38 | 88; 10 | 10 | 45 | 95; 12 | 12 | 53 | 110; 14 | 12 | 53 | 110; 16 | 16 | 63 | 123; 18 | 16 | 63 | 123; 20 | 20 | 75 | 141; 22 | 20 | 75 | 141; 25 | 25 | 90 | 166; 28 | 25 | 90 | 166; 30 | 25 | 90 | 166; 32 | 32 | 106 | 186
0307-128 | HSS 2 flutes single end mills medium / long length
Dia. | L1 Oal. | L2 Flute — verify units and ordered drawing: 1/4 | 1 | 3/8; 5/16 | 1 | 3/8; 3/8 | 1 | 3/8; 1/2 | 1-1/2 | 1/2; 5/8 | 1-5/8 | 5/8; 3/4 | 1-3/4 | 3/4; 7/8 | 2 | 7/8; 1 | 2-1/4 | 1; 1-1/4 | 2-1/4 | 1-1/4; 1/4 | 1-1/2 | 3/8; 5/16 | 1-1/2 | 3/8; 3/8 | 1-1/2 | 3/8; 1/2 | 2 | 1/2; 5/8 | 2 | 5/8; 3/4 | 2-1/4 | 3/4; 7/8 | 2-1/4 | 7/8; 1 | 3 | 1; 1-1/4 | 3 | 1-1/4
0307-129 | HSS 2 flutes single end mills regular length
Dia.mill | Dia.shk | L1 Oal | L2 Flute — verify units and ordered drawing: 1/16 | 1/16 | 1-1/2 | 1/4; 1/16 | 1/8 | 1-1/2 | 1/4; 3/32 | 1/8 | 1-1/2 | 3/8; 1/8 | 1/8 | 1-1/2 | 1/2; 1/8 | 3/8 | 2-5/16 | 3/8; 5/32 | 3/16 | 2 | 9/16; 3/16 | 3/16 | 2 | 5/8; 3/16 | 3/8 | 2-5/16 | 7/16; 7/32 | 1/4 | 2-1/2 | 5/8; 1/4 | 1/4 | 2-1/2 | 3/4; 1/4 | 3/8 | 2-5/16 | 1/2; 9/32 | 5/16 | 2-1/2 | 3/4; 5/16 | 5/16 | 2-1/2 | 13/16; 5/16 | 3/8 | 2-5/16 | 9/16; 3/8 | 3/8 | 2-1/2 | 7/8; 3/8 | 3/8 | 2-5/16 | 9/16; 7/16 | 7/16 | 2-1/2 | 7/8; 7/16 | 3/8 | 2-1/2 | 13/16; 1/2 | 1/2 | 3 | 1; 9/16 | 9/16 | 3 | 1-1/4; 9/16 | 1/2 | 3-1/8 | 1-1/8; 5/8 | 5/8 | 3-1/2 | 1-1/4; 5/8 | 1/2 | 3-1/8 | 1-1/8; 5/8 | 5/8 | 3-7/16 | 1-5/16; 11/16 | 3/4 | 4 | 1-1/2; 11/16 | 5/8 | 3-7/16 | 1-5/16; 3/4 | 1/2 | 3-7/16 | 1-5/16; 3/4 | 3/4 | 4 | 1-1/2; 3/4 | 5/8 | 3-7/16 | 1-5/16; 3/4 | 3/4 | 3-9/16 | 1-5/16; 13/16 | 5/8 | 3-5/8 | 1-1/2; 7/8 | 5/8 | 3-5/8 | 1-1/2; 7/8 | 3/4 | 3-3/4 | 1-1/2; 7/8 | 7/8 | 3-3/4 | 1-1/2; 15/16 | 3/4 | 3-3/4 | 1-1/2; 1 | 5/8 | 3-5/8 | 1-1/2; 1 | 3/4 | 3-3/4 | 1-1/2; 1 | 7/8 | 4-1/8 | 1-5/8; 1-1/8 | 1 | 4-1/8 | 1-5/8; 1-1/4 | 1 | 4-1/8 | 1-5/8; 1 | 1 | 4 | 1-1/2
0307-130 | HSS 2 flutes double end mills
Dia.mill | Dia.shk | L1 Oal | L2 Flute — verify units and ordered drawing: 1/8 | 3/8 | 3-1/16 | 3/8; 5/32 | 3/8 | 3-1/8 | 7/16; 3/16 | 3/8 | 3-1/8 | 7/16; 7/32 | 3/8 | 3-1/8 | 1/2; 1/4 | 3/8 | 3-1/8 | 1/2; 9/32 | 3/8 | 3-1/8 | 9/16; 5/16 | 3/8 | 3-1/8 | 9/16; 11/32 | 3/8 | 3-1/8 | 9/16; 3/8 | 3/8 | 3-1/8 | 9/16; 13/32 | 1/2 | 3-3/4 | 13/16; 7/16 | 1/2 | 3-3/4 | 13/16; 15/32 | 1/2 | 3-3/4 | 13/16; 1/2 | 1/2 | 3-3/4 | 13/16; 9/16 | 5/8 | 4-1/2 | 1-1/8; 5/8 | 5/8 | 4-1/2 | 1-1/8; 11/16 | 3/4 | 5 | 1-5/16; 3/4 | 3/4 | 5 | 1-5/16; 7/8 | 7/8 | 5-1/2 | 1-9/16; 15/16 | 1 | 5-7/8 | 1-5/8; 1 | 1 | 5-7/8 | 1-5/8
0307-131 | HSS 4 flutes single / double end mills (center cutting)
Dia. | Dia.shk | L2 Flute | L1 Oal — verify units and ordered drawing: 1/8 | 3/8 | 3/8 | 2-5/16; 3/16 | 3/8 | 1/2 | 2-3/8; 1/4 | 3/8 | 5/8 | 2-7/16; 5/16 | 3/8 | 3/4 | 2-1/2; 3/8 | 3/8 | 3/4 | 2-1/2; 1/2 | 1/2 | 1-1/4 | 3-1/4; 5/8 | 5/8 | 1-5/8 | 3-3/4; 3/4 | 3/4 | 1-5/8 | 3-7/8; 7/8 | 7/8 | 1-7/8 | 4-1/8; 1 | 1 | 2 | 4-1/2; 1 | 1 | 3 | 5-1/2; 1-1/8 | 1 | 2 | 4-1/2; 1-1/4 | 1-1/4 | 3 | 5-1/2
0307-132 | DIN845 HSS morse std. / long morse taper shank end mills
Dia. | L2 Flute | L1 Oal | Morse taper No. — verify units and ordered drawing: 10.0 | 22 | 92 | 1; 12.0 | 26 | 96 | 1; 13.0 | 26 | 96 | 1; 14.0 | 26 | 111 | 2; 15.0 | 26 | 111 | 2; 16.0 | 32 | 117 | 2; 18.0 | 32 | 117 | 2; 20.0 | 38 | 123 | 2; 22.0 | 38 | 123 | 2; 25.0 | 45 | 147 | 3; 28.0 | 45 | 147 | 3; 30.0 | 45 | 147 | 3; 35.0 | 53 | 178 | 4; 40.0 | 63 | 188 | 4; 45.0 | 63 | 188 | 4; 50.0 | 75 | 233 | 5; 55.0 | 75 | 233 | 5; 60.0 | 75 | 233 | 5; 65.0 | 90 | 248 | 5; 10.0 | 45 | 115 | 1; 12.0 | 53 | 123 | 1; 13.0 | 53 | 123 | 1; 14.0 | 53 | 138 | 2; 15.0 | 53 | 138 | 2; 16.0 | 63 | 148 | 2; 18.0 | 63 | 148 | 2; 20.0 | 75 | 160 | 2; 22.0 | 75 | 160 | 2; 25.0 | 90 | 192 | 3; 28.0 | 90 | 192 | 3; 30.0 | 90 | 192 | 3; 35.0 | 106 | 231 | 4; 40.0 | 125 | 250 | 4; 45.0 | 125 | 250 | 4; 50.0 | 150 | 308 | 5; 55.0 | 150 | 308 | 5; 60.0 | 150 | 308 | 5; 65.0 | 180 | 366 | 5
0307-133 | DIN1837 HSS and solid carbide slitting saw blade
Out Dia. | Plate thick | Hole Dia | No.of teeth | No.of teeth — verify units and ordered drawing: 63 | 0.5 | 16 | 32 | 80; 63 | 0.8 | 16 | 32 | 80; 63 | 1.0 | 16 | 32 | 100; 63 | 1.2 | 16 | 24 | 80; 63 | 1.6 | 16 | 24 | 80; 63 | 2.0 | 16 | 24 | 80; 63 | 2.5 | 16 | 20 | 64; 80 | 1.2 | 22 | 32 | 100; 80 | 1.6 | 22 | 32 | 100; 80 | 2.0 | 22 | 24 | 80; 80 | 2.5 | 22 | 24 | 80; 80 | 3.0 | 22 | 24 | 80; 100 | 1.6 | 27 | 32 | 100; 100 | 2.0 | 27 | 32 | 100; 100 | 2.5 | 27 | 24 | 80; 100 | 3.0 | 27 | 24 | 80; 100 | 3.5 | 27 | 24 | 80; 125 | 2.0 | 27 | 40 | 128; 125 | 2.5 | 27 | 32 | 100; 125 | 3.0 | 27 | 32 | 100; 125 | 3.5 | 27 | 32 | 100; 125 | 4.0 | 27 | 32 | 100; 160 | 2.5 | 32 | 40 | 128; 160 | 3.0 | 32 | 40 | 128; 160 | 3.5 | 32 | 32 | 100; 160 | 4.0 | 32 | 32 | 100; 160 | 4.5 | 32 | 32 | 100; 200 | 3.0 | 32 | 40 | 128; 200 | 3.5 | 32 | 40 | 128; 200 | 4.0 | 32 | 40 | 128; 200 | 4.5 | 32 | 40 | 128; 200 | 5.0 | 32 | 40 | 128
0307-134 | Rotary burrs type M - Conical Point
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing: 6 | 18 | 63 | 6; 8 | 20 | 65 | 6; 10 | 20 | 65 | 6; 12 | 25 | 70 | 6; 16 | 25 | 70 | 6
0307-135 | Rotary burrs type G - Arc pointd
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing: 6 | 18 | 63 | 6; 8 | 20 | 63 | 6; 10 | 20 | 65 | 6; 12 | 25 | 70 | 6; 16 | 25 | 70 | 6
0307-136 | Rotary burrs type A - Cylindrical
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing: 6 | 16 | 61 | 6; 8 | 20 | 65 | 6; 10 | 20 | 65 | 6; 12 | 25 | 70 | 6; 16 | 25 | 70 | 6
0307-137 | Rotary burrs type F - Arc Cylindrical with round head
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing: 6 | 18 | 63 | 6; 8 | 20 | 63 | 6; 10 | 20 | 65 | 6; 12 | 25 | 70 | 6; 16 | 25 | 70 | 6
0307-138 | Rotary burrs type B - Cylindrical with end cutter
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing: 6 | 16 | 61 | 6; 8 | 20 | 65 | 6; 10 | 20 | 65 | 6; 12 | 25 | 70 | 6; 16 | 25 | 70 | 6
0307-139 | Rotary burrs type C - Cylindrical with Ball top
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing: 6 | 16 | 61 | 6; 8 | 20 | 65 | 6; 10 | 20 | 65 | 6; 12 | 25 | 70 | 6; 16 | 25 | 70 | 6
0307-140 | Rotary burrs type D - Sphere
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing: 6 | 5 | 50 | 6; 8 | 7 | 52 | 6; 10 | 9 | 54 | 6; 12 | 10 | 56 | 6; 16 | 14 | 60 | 6
0307-141 | Rotary burrs type K - 90° Conical
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing: 6 | 6 | 51 | 6; 8 | 8 | 54 | 6; 10 | 10 | 55 | 6; 12 | 11 | 57 | 6; 16 | 13 | 60 | 6
0307-142 | Rotary burrs type H - Torch shape
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing: 6 | 18 | 63 | 6; 8 | 20 | 65 | 6; 10 | 25 | 70 | 6; 12 | 32 | 76 | 6; 16 | 36 | 80 | 6
0307-143 | Rotary burrs type L - Conical with Round head
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing: 6 | 16 | 61 | 6; 8 | 22 | 67 | 6; 10 | 25 | 70 | 6; 12 | 28 | 73 | 6; 16 | 33 | 78 | 6
0307-144 | Rotary burrs type E - Elliptic Cylindrical
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing: 6 | 10 | 55 | 6; 8 | 13 | 58 | 6; 10 | 16 | 61 | 6; 12 | 22 | 65 | 6; 16 | 25 | 70 | 6
0307-145 | HSS G&E metric drill blank hardened and ground
Dia | L1 Oal — verify units and ordered drawing: 1 | 34; 1.05 | 34; 1.1 | 36; 1.15 | 36; 1.2 | 38; 1.25 | 38; 1.3 | 38; 1.35 | 40; 1.4 | 40; 1.45 | 40; 1.5 | 40; 1.55 | 43; 1.6 | 43; 1.65 | 43; 1.7 | 43; 1.75 | 46; 1.8 | 46; 1.85 | 46; 1.9 | 46; 1.95 | 49; 2 | 49; 2.05 | 49; 2.1 | 49; 2.15 | 53; 2.2 | 53; 2.25 | 53; 2.3 | 53; 2.35 | 53; 2.4 | 57; 2.45 | 57; 2.5 | 57; 2.55 | 57; 2.6 | 57; 2.65 | 57; 2.7 | 61; 2.75 | 61; 2.8 | 61; 2.9 | 61; 3 | 61; 3.1 | 65; 3.2 | 65; 3.3 | 65; 3.4 | 70; 3.5 | 70; 3.6 | 70; 3.7 | 70; 3.75 | 70; 3.8 | 75; 3.9 | 75; 4 | 75; 4.1 | 75; 4.2 | 75; 4.25 | 75; 4.3 | 80; 4.4 | 80; 4.5 | 80; 4.6 | 80; 4.7 | 80; 4.75 | 80; 4.8 | 86; 4.9 | 86; 5 | 86; 5.1 | 86; 5.2 | 86; 5.25 | 86; 5.3 | 86; 5.4 | 93; 5.5 | 93; 5.6 | 93; 5.7 | 93; 5.75 | 93; 5.8 | 93; 5.9 | 93; 6 | 93; 6.1 | 101; 6.2 | 101; 6.3 | 101; 6.4 | 101; 6.5 | 101; 6.6 | 101; 6.7 | 101; 6.75 | 101; 6.8 | 109; 6.9 | 109; 7 | 109; 7.1 | 109; 7.2 | 109; 7.3 | 109; 7.4 | 109; 7.5 | 109; 7.6 | 117; 7.7 | 117; 7.75 | 117; 7.8 | 117; 7.9 | 117; 8 | 117; 8.1 | 117; 8.2 | 117; 8.25 | 117; 8.3 | 117; 8.4 | 117; 8.5 | 117; 8.6 | 125; 8.7 | 125; 8.75 | 125; 8.8 | 125; 8.9 | 125; 9 | 125; 9.1 | 125; 9.2 | 125; 9.3 | 125; 9.4 | 125; 9.5 | 125; 9.6 | 133; 9.7 | 133; 9.75 | 133; 9.8 | 133; 9.9 | 133; 10 | 133; 10.5 | 133; 11 | 142; 11.5 | 142; 12 | 151; 13 | 151; 13.5 | 160; 14 | 160; 15 | 169; 15.5 | 178; 16 | 178; 16.5 | 184; 17 | 184; 17.5 | 191; 18 | 191; 19 | 198; 20 | 205
0307-146 | HSS tool bits
Metric — verify units and ordered drawing: 4.0x100; 4.0x150; 4.0x200; 6.0x100; 6.0x150; 6.0x200; 8.0x100; 8.0x150; 8.0x200; 10.0x100; 10.0x150; 10.0x200; 12.0x100; 12.0x150; 12.0x200; 14.0x100; 14.0x150; 14.0x200; 16.0x100; 16.0x150; 16.0x200; 18.0x100; 18.0x150; 18.0x200; 20.0x100; 20.0x150; 20.0x200; 22.0x100; 22.0x150; 22.0x200; 24.0x100; 24.0x150; 24.0x200; 26.0x100; 26.0x150; 26.0x200; Inch — verify units and ordered drawing: 5/32”x4”; 5/32 x 6; 5/32 x 8; 1/4 x 4; 1/4 x 6; 1/4 x 8; 5/16 x 4; 5/16 x 6; 5/16 x 8; 3/8 x 4; 3/8 x 6; 3/8 x 8; 1/2 x 4; 1/2 x 6; 1/2 x 8; 9/16 x 4; 9/16 x 6; 9/16 x 8; 5/8 x 4; 5/8 x 6; 5/8 x 8; 11/16 x 4; 11/16 x 6; 11/16 x 8; 25/32 x 4; 25/32 x 6; 25/32 x 8; 7/8 x 4; 7/8 x 6; 7/8 x 8; 15/16 x 4; 15/16 x 6; 15/16 x 8; 1 x 4; 1 x 6; 1 x 8
0307-147 | HSS Rectangular tool bits
Metric — verify units and ordered drawing: 3.0x10.0x200; 5.0x10.0x200; 6.0x10.0x200; 3.0x12.0x200; 5.0x12.0x200; 6.0x12.0x200; 8.0x12.0x200; 10.0x12.0x200; 3.0x15.0x200; 5.0x15.0x200; 6.0x15.0x200; 8.0x15.0x200; 10.0x15.0x200; 3.0x20.0x200; 5.0x20.0x200; 6.0x20.0x200; 8.0x20.0x200; 10.0x20.0x200; 12.0x20.0x200; 15.0x20.0x200; 10.0x25.0x200; 12.0x25.0x200; 15.0x25.0x200; 20.0x25.0x200; Inch — verify units and ordered drawing: 1/8”x3/8”x8”; 3/16x3/8x8; 1/4x3/8x8; 1/8x1/2x8; 3/16x1/2x8; 1/4x1/2x8; 5/16x1/2x8; 3/8x1/2x8; 1/8x5/8x8; 3/16x5/8x8; 1/4x5/8x8; 5/16x5/8x8; 3/8x5/8x8; 1/8x3/4x8; 3/16x3/4x8; 1/4x3/4x8; 5/16x3/4x8; 3/8x3/4x8; 1/2x3/4x8; 5/8x3/4x8; 3/8x1x8; 1/2x1x8; 5/8x1x8; 3/4x1x8
0307-148 | Thin diamond cutting/grinding discs
Diameter options: 115 or 125 mm; Tooth depth: 25 mm; Edge-cut reference: 45°
0307-149 | Carbide-tipped soft-tile and glass drills
Sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2 inch; Shank: Hexagonal
0307-150 | Double-row diamond grinding cups
Diameter options: 100, 115, 125, 150, 180 mm
0307-151 | Double-row concrete grinding cups
Diameter options: 100, 115, 125, 150, 180 mm
0307-152 | Eight-segment diamond grinding cups
Diameter options: 100, 115, 125, 150, 180 mm; Segment count: 8
0307-153 | Vacuum-brazed diamond metal-cutting discs
Diameter options: 115, 125, 150, 180, 230 mm
0307-154 | Multi-material vacuum-brazed diamond discs
Diameter options: 115, 125, 150, 180, 230 mm
0307-155 | Thin turbo diamond discs
Diameter options: 115, 125, 150, 180, 230 mm
0307-156 | Thin segmented diamond discs
Diameter options: 115, 125, 150, 180, 230 mm
0307-157 | Thin continuous-rim diamond discs
Diameter options: 115, 125, 150, 180, 230 mm; Use direction: Wet cutting
0307-158 | Brazed-diamond hole beveling tools
Head reference: 48 mm / 1-7/8 inch; Thread: 5/8–11; Hole-enlargement reference: Up to 50 mm; confirm tool geometry and starting hole
0307-159 | Wax-core vacuum-brazed diamond drill assortment
Set / sizes: 5 pieces: 1/4, 5/16, 3/8, 1/2, 9/16 inch; Diamond length: 10 mm; Approximate working depth: 30 mm; Shank: 1/4 inch quick-change hex
0307-160 | DIN8039 masonry drill , Milled
Dia x L1 Oal — dimensional units and current drawing to confirm: 3x60; 4x75; 5x85; 5.5x85; 6.0x100; 6.5x100; 7x100; 8x120; 9x120; 10x120; 11x150; 12x150; 13x150; 14x150; 15x150; 16x160; 17x160; 18x160; 19x160; 20x160; 21x160; 22x160; 23x160; 24x160; 25x160; 5x150; 6x150; 7x150; 8x150; 9x150; 10x150; 6x200; 7x200; 8x200; 9x200; 10x200; 11x200; 12x200; 13x200; 14x200; 15x200; 16x200; 17x200; 18x200; 19x200; 20x200; 21x200; 22x200; 23x200; 24x200; 25x200; 26x200; 5x300; 6x300; 7x300; 8x300; 9x300; 10x300; 11x300; 12x300; 13x300; 14x300; 15x300; 16x300; 17x300; 18x300; 19x300; 20x300; 21x300; 22x300; 24x300; 25x300; 26x300; 6x400; 7x400; 8x400; 9x400; 10x400; 11x400; 12x400; 13x400; 14x400; 15x400; 16x400; 17x400; 18x400; 19x400; 20x400; 21x400; 22x400; 23x400; 24x400; 25x400; 26x400; 28x400; 30x400; 6x600; 7x600; 8x600; 9x600; 10x600; 11x600; 12x600; 13x600; 14x600; 15x600; 16x600; 17x600; 18x600; 19x600; 20x600; 21x600; 22x600; 23x600; 24x600; 25x600; 26x600
0307-161 | DIN8039 rock drill , Cold roll-forged
Dia. | L1 Oal — verify units and ordered drawing: 3.0 | 60; 3.5 | 75; 4.0 | 75; 5.0 | 85; 5.5 | 85; 3.0 | 100; 4.0 | 100; 5.0 | 100; 5.5 | 100; 6.0 | 100; 6.5 | 100; 7.0 | 100; 8.0 | 120; 9.0 | 120; 9.5 | 120; 10.0 | 120; 4.0 | 150; 5.0 | 150; 5.5 | 150; 6.0 | 150; 6.5 | 150; 7.0 | 150; 8.0 | 150; 9.0 | 150; 9.5 | 150; 10.0 | 150; 11.0 | 150; 12.0 | 150; 13.0 | 150; 14.0 | 150; 15.0 | 150; 16.0 | 150; 17.0 | 160; 18.0 | 160; 20.0 | 160; 22.0 | 160; 23.0 | 160; 25.0 | 160; 6.0 | 200; 6.5 | 200; 7.0 | 200; 8.0 | 200; 9.0 | 200; 9.5 | 200; 10.0 | 200; 11.0 | 200; 12.0 | 200; 13.0 | 200; 14.0 | 200; 15.0 | 200; 16.0 | 200; 17.0 | 200; 18.0 | 200; 20.0 | 200; 22.0 | 200; 23.0 | 200; 25.0 | 200; 6.0 | 300; 6.5 | 300; 7.0 | 300; 8.0 | 300; 9.0 | 300; 9.5 | 300; 10.0 | 300; 11.0 | 300; 12.0 | 300; 13.0 | 300; 14.0 | 300; 15.0 | 300; 16.0 | 300; 17.0 | 300; 18.0 | 300; 20.0 | 300; 22.0 | 300; 23.0 | 300; 25.0 | 300; 6.0 | 400; 6.5 | 400; 7.0 | 400; 8.0 | 400; 9.0 | 400; 9.5 | 400; 10.0 | 400; 11.0 | 400; 12.0 | 400; 13.0 | 400; 14.0 | 400; 15.0 | 400; 16.0 | 400; 17.0 | 400; 18.0 | 400; 20.0 | 400; 22.0 | 400; 23.0 | 400; 25.0 | 400; 6.0 | 600; 6.5 | 600; 7.0 | 600; 8.0 | 600; 9.0 | 600; 9.5 | 600; 10.0 | 600; 11.0 | 600; 12.0 | 600; 13.0 | 600; 14.0 | 600; 15.0 | 600; 16.0 | 600; 17.0 | 600; 18.0 | 600; 20.0 | 600; 22.0 | 600; 23.0 | 600; 25.0 | 600
0307-162 | DIN8039 rotary and impact drill
Dia. | L1 Oal — verify units and ordered drawing: 3.0 | 60; 3.5 | 75; 4.0 | 75; 5.0 | 85; 5.5 | 85; 6.0 | 100; 6.5 | 100; 7.0 | 100; 8.0 | 120; 9.0 | 120; 9.5 | 120; 10.0 | 120; 12.0 | 150; 13.0 | 150; 14.0 | 150; 15.0 | 150; 16.0 | 150; 17.0 | 160; 18.0 | 160; 20.0 | 160; 22.0 | 160; 23.0 | 160; 25.0 | 160; 6.0 | 400; 6.5 | 400; 7.0 | 400; 8.0 | 400; 9.0 | 400; 9.5 | 400; 10.0 | 400; 11.0 | 400; 12.0 | 400; 13.0 | 400; 14.0 | 400; 15.0 | 400; 16.0 | 400; 17.0 | 400; 18.0 | 400; 20.0 | 400; 22.0 | 400; 23.0 | 400; 25.0 | 400; 1/8 | 2-3/8; 9/64 | 3; 5/32 | 3; 3/16 | 3-3/8; 7/32 | 3-3/8; 15/64 | 4; 1/4 | 4; 9/32 | 4; 5/16 | 4-3/4; 11/32 | 4-3/4; 3/8 | 4-3/4; 13/32 | 4-3/4; 7/16 | 6; 15/32 | 6; 1/2 | 6; 9/16 | 6; 19/32 | 6; 5/8 | 6; 11/16 | 6-3/8; 23/32 | 6-3/8; 3/4 | 6-3/8; 7/8 | 6-3/8; 15/16 | 6-3/8; 1 | 6-3/8
0307-163 | Universal masonry drills, milled direction
Diameter / overall-length references: 3 / 70; 3.5/4 / 75; 5/5.5 / 85; 6/6.5/7 / 100; 8/9/9.5/10 / 120; 12/13/14/15/16 / 150; 17/18/20 / 160; Standard reference: DIN 8039
0307-164 | Masonry drill - tapcon style
Dia. | L1 Oal — verify units and ordered drawing: 5/32” | 3-1/2”; 5/32 | 4-1/2; 5/32 | 5-1/2; 3/16 | 3-1/2; 3/16 | 4-1/2; 3/16 | 5-1/2; 3/16 | 6-1/2
0307-165 | DIN8039 concrete drill, black&silver
Dia. | L1 Oal — verify units and ordered drawing: 3.0 | 60; 3.5 | 75; 4.0 | 75; 5.0 | 85; 5.5 | 85; 6.0 | 100; 6.5 | 100; 7.0 | 100; 8.0 | 120; 9.0 | 120; 9.5 | 120; 10.0 | 120; 12.0 | 150; 13.0 | 150; 14.0 | 150; 15.0 | 150; 16.0 | 150; 17.0 | 160; 18.0 | 160; 20.0 | 160; 22.0 | 160; 23.0 | 160; 25.0 | 160; 6.0 | 400; 6.5 | 400; 7.0 | 400; 8.0 | 400; 9.0 | 400; 9.5 | 400; 10.0 | 400; 11.0 | 400; 12.0 | 400; 13.0 | 400; 14.0 | 400; 15.0 | 400; 16.0 | 400; 17.0 | 400; 18.0 | 400; 20.0 | 400; 22.0 | 400; 23.0 | 400; 25.0 | 400
0307-166 | DIN8039 rock drill
Dia. | L1 Oal — verify units and ordered drawing: 1/8” | 2-3/8”; 9/64 | 3; 5/32 | 3; 3/16 | 3-3/8; 7/32 | 3-3/8; 15/64 | 4; 1/4 | 4; 9/32 | 4; 5/16 | 4-3/4; 11/32 | 4-3/4; 3/8 | 4-3/4; 13/32 | 4-3/4; 7/16 | 6; 15/32 | 6; 1/2 | 6; 9/16 | 6; 19/32 | 6; 5/8 | 6; 11/16 | 6-3/8; 23/32 | 6-3/8; 3/4 | 6-3/8; 7/8 | 6-3/8; 15/16 | 6-3/8; 1 | 6-3/8
0307-167 | Slow spiral masonry drill
Dia. | L1 Oal — verify units and ordered drawing: 1/8” | 3”; 3/16 | 4; 1/4 | 4; 5/16 | 4; 3/8 | 4; 1/2 | 4; 1/4 | 6; 5/16 | 6; 3/8 | 6; 7/16 | 6; 1/2 | 6; 9/16 | 6; 5/8 | 6; 3/4 | 6; 7/8 | 6; 1 | 6
0307-168 | Fast spiral masonry drill
Dia. | L1 Oal — verify units and ordered drawing: 1/8” | 3; 3/16 | 4; 1/4 | 4; 5/16 | 4; 3/8 | 4; 1/2 | 4; 1/4 | 6; 5/16 | 6; 3/8 | 6; 7/16 | 6; 1/2 | 6; 9/16 | 6; 5/8 | 6; 3/4 | 6
0307-169 | Universal drill bits with hex shank
Dia. | L1 Oal — verify units and ordered drawing: 3.0 | 70; 3.5 | 75; 4.0 | 75; 5.0 | 85; 5.5 | 85; 6.0 | 100; 6.5 | 100; 7.0 | 100; 8.0 | 120; 9.0 | 120; 9.5 | 120; 10.0 | 120; 12.0 | 150
0307-170 | Glass and ceramic drill
Construction / finish choices: Cross; confirm availability for each size; Dia. — verify units and ordered drawing: 3×60mm; 4×60; 5×70; 6×75; 7×75; 8×80; 9×85; 10×85; 12×100; 13×100; 14×100; 16×100; 18×100; 20×110; 22×110; 25×110
0307-171 | Chisel for hammer
size | shank | type — verify units and ordered drawing: 400 | H30 | Point; 410 | H30 | Point; 410x35 | H30 | Flat
0307-172 | Hex shank chisel
size | shank | type — verify units and ordered drawing: 400 | H28 | Point; 30x400 | H28 | Flat; 35x400 | H28 | Flat; 80x400 | H28 | Flat
0307-173 | Max&Hex chisel (For machine )
size | shank | type — verify units and ordered drawing: 3.2x280 | H17 | Point; 25x280 | H17 | Flat
0307-174 | SDS plus shank ground rod driver
Size — verify units and ordered drawing: 3/4"; 5/8"
0307-175 | Heavy duty hollow core drill
Size — verify units and ordered drawing: 40; 45; 50; 55; 65; 75; 80; 100; 115; 125; 150
0307-176 | Diamond core bits ( G type)
Dia. mm | Effective depth | Segment height | Connection — verify units and ordered drawing: 19 | 40+150 | 7.5 | M12; 20 | 40+150 | 7.5 | M12; 25 | 40+150 | 7.5 | M12; 30 | 40+150 | 7.5 | M12; 35 | 40+150 | 7.5 | M12; 40 | 40+150 | 7.5 | M12; 45 | 40+150 | 7.5 | M12; 50 | 40+150 | 7.5 | M12; 53 | 40+150 | 7.5 | M12; 60 | 40+150 | 7.5 | M12; 65 | 40+150 | 7.5 | M12; 70 | 40+150 | 7.5 | M12; 75 | 40+150 | 7.5 | M12; 80 | 40+150 | 7.5 | M12; 85 | 40+150 | 7.5 | M12; 90 | 40+150 | 7.5 | M12; 100 | 40+150 | 7.5 | M12; 108 | 40+150 | 7.5 | M12; 110 | 40+150 | 7.5 | M12; 120 | 40+150 | 7.5 | M12; 130 | 40+150 | 7.5 | M12; 150 | 40+150 | 7.5 | M12; 158 | 40+150 | 7.5 | M12; 165 | 40+150 | 7.5 | M12
0307-177 | Diamond core bits (F glass type)
Dia. mm | Effective depth | Segment height | Connection — verify units and ordered drawing: 5 | 30/50 | 8/10 | round shank; 6 | 30/50 | 8/10 | round shank; 8 | 30/50 | 8/10 | round shank; 10 | 30/50 | 8/10 | triangular shank; 12 | 30/50 | 8/10 | triangular shank; 14 | 30/50 | 8/10 | triangular shank; 16 | 30/50 | 8/10 | hexagonal shank; 18 | 30/50 | 8/10 | hexagonal shank; 20 | 30/50 | 8/10 | hexagonal shank; 25 | 30/50 | 8/10 | 1/2” BSP; 30 | 30/50 | 8/10 | 1/2” BSP; 35 | 30/50 | 8/10 | 1/2” BSP
0307-178 | Sintered and laser brazed diamond hollow annular bits
Dia. | cutting depth | thread — verify units and ordered drawing: 68 | 65 | M16; 82 | 65 | M16; 25 | 150 | M22
0307-179 | Vacuum brazed diamond hole saw M14 thread
Dia. | Cutting depth | Total length — verify units and ordered drawing: 5 | 30 | 70; 6 | 30 | 70; 8 | 40 | 80; 10 | 40 | 80; 12 | 40 | 80; 14 | 40 | 80; 16 | 40 | 80
0307-180 | Electro-plated diamond hole saw
Dia | Cutting depth — verify units and ordered drawing: 18 | 45; 22 | 45; 25 | 45; 35 | 45; 45 | 45; 53 | 45; 60 | 45; 65 | 45; 68 | 45; 74 | 45; 83 | 45
0307-181 | Vacuum brazed diamond hole saw M14 thread
Dia. | Thread — verify units and ordered drawing: 20 | M14; 21 | M14; 22 | M14; 23 | M14; 24 | M14; 25 | M14; 26 | M14; 27 | M14; 28 | M14; 29 | M14; 30 | M14; 31 | M14; 32 | M14; 33 | M14; 34 | M14; 35 | M14; 36 | M14; 37 | M14; 38 | M14; 39 | M14; 40 | M14; 41 | M14; 42 | M14; 43 | M14; 44 | M14; 45 | M14; 46 | M14; 47 | M14; 48 | M14; 49 | M14; 50 | M14; 51 | M14; 52 | M14; 53 | M14; 54 | M14; 55 | M14; 56 | M14; 57 | M14; 58 | M14; 59 | M14; 60 | M14; 61 | M14; 62 | M14; 63 | M14; 64 | M14; 65 | M14; 66 | M14; 67 | M14; 68 | M14; 69 | M14; 70 | M14; 71 | M14; 72 | M14; 73 | M14; 74 | M14; 75 | M14; 76 | M14; 77 | M14; 78 | M14; 79 | M14; 80 | M14; 81 | M14; 82 | M14; 83 | M14; 84 | M14; 85 | M14; 86 | M14; 87 | M14; 88 | M14; 89 | M14; 90 | M14; 91 | M14; 92 | M14; 93 | M14; 94 | M14; 95 | M14; 96 | M14; 97 | M14; 98 | M14; 99 | M14; 100 | M14; 101 | M14; 102 | M14; 103 | M14; 104 | M14; 105 | M14; 106 | M14; 107 | M14; 108 | M14; 109 | M14; 110 | M14; 111 | M14; 112 | M14; 113 | M14; 114 | M14; 115 | M14; 116 | M14; 117 | M14; 118 | M14; 119 | M14; 120 | M14
0307-182 | Tungsten carbide grit hole saw
Dia. — verify units and ordered drawing: 33.0; 43.0; 53.0; 63.0; 68.0; 73.0; 83.0; 103.0; 113.0
0307-183 | Tungsten carbide grit hole saw plug&play
Dia. | Cutting depth — verify units and ordered drawing: 33 | min.55mm; 43 | min.55mm; 53 | min.55mm; 68 | min.55mm; 73 | min.55mm; 83 | min.55mm; 103 | min.55mm
0307-184 | Carbide grit file
Oal | Oal — verify units and ordered drawing: 150 | 6”; 200 | 8; 250 | 10; 300 | 12
0307-185 | Carbide grit blade
size — verify units and ordered drawing: 50x18
0307-186 | Continuous-tooth carbide cement hand saws
Length / teeth: 700 mm / 34T; 600 mm / 30T; 550 mm / 28T
0307-187 | Spaced-tooth carbide cement hand saws
Length / teeth: 700 mm / 17T; 600 mm / 15T; 550 mm / 14T
0307-188 | Carbide hack saw blade
Length | Length — verify units and ordered drawing: 10” | 250mm; 12” | 300
0307-189 | Carbide grit reciprocating saw blade
Length | Length — verify units and ordered drawing: 10” | 250mm; 12” | 300
0307-190 | Carbide rod saw
Length | Length — verify units and ordered drawing: 6” | 150mm; 10” | 250; 12” | 300
0307-191 | Carbide or Diamond jig saw blade
Length | Length — verify units and ordered drawing: 3” | 75mm; 4” | 100
0307-192 | Carbide-tooth reciprocating blades
Material: 50CrV + carbide tips; Length / tooth reference: 6, 9 or 12 inch, each with 6T or 8T options
0307-193 | T41C cutting discs for natural and artificial stone
size:mm — verify units and ordered drawing: 100x2.5x16; 100x3.0x16; 115x2.5x22.2; 115x3.0x22.2; 125x2.5x22.2; 125x3.0x22.2; 150x2.5x22.2; 150x3.0x22.2; 180x3.0x22.2; 230x3.0x22.2
0307-194 | T42C depressed cutting discs for natural and artificial stone
size:mm — verify units and ordered drawing: 115x3.2x22.2; 125x3.2x22.2; 180x3.2x22.2; 230x3.2x22.2
0307-195 | T27C depressed grinding discs for matural and artificial stone
size:mm — verify units and ordered drawing: 100x6.0x16; 115x6.0x22.2; 125x6.0x22.2; 150x6.0x22.2; 180x6.0x22.2; 230x6.0x22.2; 115x6.0x16; 125x6.0x16; 150x6.0x16; 180x6.0x16; 230x6.0x16
0307-196 | Double row cup wheel
Dia. — verify units and ordered drawing: 115
0307-197 | Impressed Slot Cup Wheel-Aluminum Back
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing: 100 | 4” | 5/8-11” | · | ·; 115 | 4.5” | 5/8-11” | · | ·; 125 | 5” | 5/8-11” | · | ·; 180 | 7” | 5/8-11” | · | ·
0307-198 | Nubby Row Cup Wheel
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing: 100 | 4” | 7/8-5/8-11” | 7x5mm | 7; 115 | 4.5” | 7/8-5/8-11” | 7x5mm | 8; 125 | 5” | 7/8-5/8-11” | 7x5mm | 9; 180 | 7” | 7/8-5/8-11” | 7x5mm | 12
0307-199 | Special Fixed Cup Wheel
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing: 100 | 4” | 7/8-5/8-11” | 7x5mm | ·; 115 | 4.5” | 7/8-5/8-11” | 7x5mm | ·; 125 | 5” | 7/8-5/8-11” | 7x5mm | ·; 180 | 7” | 7/8-5/8-11” | 7x5mm | —
0307-200 | Continuous Rim Cup Wheel
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing: 100 | 4” | 7/8-5/8-11” | 5mm | ·; 115 | 4.5” | 7/8-5/8-11” | 5mm | ·; 125 | 5” | 7/8-5/8-11” | 5mm | ·; 180 | 7” | 7/8-5/8-11” | 5mm | —
0307-201 | Swirling Segment Cup Wheel
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing: 100 | 4” | 7/8-5/8-11” | 5mm | ·; 115 | 4.5” | 7/8-5/8-11” | 5mm | ·; 125 | 5” | 7/8-5/8-11” | 5mm | ·; 180 | 7” | 7/8-5/8-11” | 5mm | ·
0307-202 | Fire-slot Rim Cup Wheel
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing: 100 | 4” | 7/8-5/8-11” | 5mm | ·; 115 | 4.5” | 7/8-5/8-11” | 5mm | ·; 125 | 5” | 7/8-5/8-11” | 5mm | ·; 180 | 7” | 7/8-5/8-11” | 5mm | ·
0307-203 | Arrowed Turbo Cup Wheel-Aluminum Back
Dia. | Unlabelled dimension | Arbor | Segments | Seg.No — verify units and ordered drawing: 100 | 4” | 7/8-5/8-11” | — | —; 115 | 4.5” | 7/8-5/8-11” | — | —; 125 | 5” | 7/8-5/8-11” | — | —; 180 | 7” | 7/8-5/8-11” | — | —
0307-204 | Rose Turbo Cup Wheel-Aluminum Back
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing: 100 | 4” | 5/8-11” | · | ·; 115 | 4.5” | 5/8-11” | · | ·; 125 | 5” | 5/8-11” | · | ·; 180 | 7” | 5/8-11” | · | ·
0307-205 | Three-flute HSS brad-point wood drills
Diameter range: 1.0–13.0 mm; Shank: 1/4 inch (6.35 mm) quick-change hex
0307-206 | Lightweight coated carbide wood saws
Diameter / bore / teeth: 125/140/150/165/184 mm; each with 22.2 mm bore and 24T
0307-207 | Replaceable carbide countersinks with depth stop
Drill × countersink options: 3.2 × 9.5; 3.6 × 9.5; 4.0 × 9.5 mm; Shank: Quick-release hex
0307-208 | Three-flute self-feeding wood bits
Diameters: 6, 8, 10, 12, 14, 16, 18, 20, 22, 25, 28, 30, 32, 35 mm; Length options: 155, 230, 300, 460, 600 mm; confirm valid diameter/length pairs; Shank: 1/4 inch hex
0307-209 | Three-edge flat wood bits
Diameters: 10, 12, 14, 16, 18, 19, 20, 22, 25, 28, 30, 32, 35 mm; Length: 152 mm; Shank: 6.35 mm hex
0307-210 | Screw-point three-edge flat bits
Diameters: 10, 12, 14, 16, 18, 19, 20, 22, 25, 28, 30, 32, 35 mm; Length: 152 mm; Shank: 6.35 mm hex
0307-211 | Fully ground HSS brad-point wood drills
Diameter range: 3–13 mm; Overall length range: 90–160 mm
0307-212 | Carbide-tooth wood reciprocating blades
Length options: 152 or 228 mm; TPI options: 3, 6 or 8; confirm actual pair
0307-213 | PCD raised-panel router cutters
Diameter range: 31.8–47 mm; Cut-height range: 9.3–14.7 mm; confirm paired drawing
0307-214 | Carbide-tipped profiling router cutters
Diameter range: 21.8–88.9 mm; Shank: 12.7 mm
0307-215 | Hand-operated eye augers
Cut diameter: 25 mm / 1 inch; Overall length options: 152–300 mm
0307-216 | Stub brad-point drills
Diameter options: 2.38, 3.17, 4.76, 6.35, 7.94, 9.53 mm; Overall length: 60 mm
0307-217 | Two-flute straight carbide-tipped router bits
Diameter range: 3–12 mm; Shank: 12.7 mm
0307-218 | Carbide brad-point boring tools
Cut diameter range: 6–12 mm; Shank: 10 mm; Rotation: Right or left; specify separately
0307-219 | V-point through-boring tools
Cut diameter range: 6–12 mm; Shank: 10 mm; Rotation: Right or left
0307-220 | Hinge-pocket CNC boring tools
Cut diameter range: 15–60 mm; Shank: 10 mm; Rotation: Right or left
0307-221 | Three-flute tapered routing tools
Diameter ranges: 2–12; 3–12; 4–12 mm; Shank reference: 12 mm; confirm approved drawing
0307-222 | Solid-carbide tapered ball-nose router tools
Diameter and shank ranges: 3.175–6 mm; select paired drawing
0307-223 | Two-flute upcut carbide router tools
Diameter range: 4–16 mm; Shank range: 4–16 mm; confirm matching pair
0307-224 | Compression-spiral carbide bits with chipbreaker
Diameter range: 4–12 mm; Shank range: 4–12 mm; confirm matching pair
0307-225 | Three-spiral roughing carbide end mills
Diameter range: 16–22 mm; Shank: 16 mm
0307-226 | M42 HSS single-flute upcut mills
Diameter range: 3–8 mm; Shank: 12.7 mm
0307-227 | Router bits
Type — verify units and ordered drawing: Carbide straight bit (single flute); Carbide straight bit (double flutes); Panel pilot bit with drill point; Stagger teeth straight bit; Bottom cleaning bit; Hinge boring bit; 45 degree angle chamfer bit; Straight bit with bearing; Horse nose bit; Glue joint bit; Grooving bit 90 angle; Dovetail bit; Lock miter bit; Corner round bit; Finger nail bit; Classical cove bit; Cove bit with bearing; Mortising bit; Flat ogee bit; Roman ogee bit with bearing; Classical moulding bit; Curved line bit; Classical bit; Drawing line bit; Double roman ogee bit; Wavy edge bit; Special moulding bit; Edge beading bit; Double-Arc round nose bit; Table edge bit; Table ogee bit; Table corner bit; Table curved round bit; Keyhole bit; Traditional bit; Roman classical bit; Roman ogee bit; Undermount bowl bit; Side finger nail type bit; Arch type router bit; Drawer lock bit; Door lip tib; Hinge bit; Open end carving bit; Miter bit; Bevel carving bit; Stamen type classical plunge bit; Carving bit; Marginal classical plunge bit; Flat bottom cutter; Classical ogee plunge bit; Core box bi; Round nose bit
0307-228 | Slot mortise bits
Dia. | L2 Flute | Oal | shank — verify units and ordered drawing: 5 | 35 | 105 | 13x50; 6 | 35 | 110 | 13x50; 7 | 35 | 120 | 13x50; 8 | 40 | 125 | 13x50; 9 | 40 | 130 | 13x50; 10 | 45 | 135 | 13x50; 11 | 48 | 140 | 13x50; 12 | 50 | 145 | 13x50; 13 | 53 | 150 | 13x50; 14 | 55 | 155 | 13x50; 15 | 58 | 160 | 13x50; 16 | 60 | 165 | 16x50; 18 | 68 | 175 | 16x50; 20 | 70 | 180 | 16x50; 22 | 75 | 185 | 16x50; 24 | 77 | 190 | 16x50; 26 | 80 | 195 | 20x50; 28 | 50 | 200 | 20x50; 30 | 85 | 210 | 20x50
0307-229 | Carbon-steel wood shaping and boring tools
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-230 | Wood and plastic hole-making assortment
Hole saws: 13 pieces, 19–127 mm / 3/4–5 inch; Spade bits: 1 inch and 7/8 inch; Saw-drill sizes: 1/4 inch and 5/16 inch; Accessories: Mandrels, hex keys, installation plate and case; confirm count
0307-231 | Universal hole saw (standard)
Dia. | cutting depth | teeth No. — verify units and ordered drawing: 20 | 60 | 1; 25 | 60 | 1; 30 | 60 | 1; 35 | 60 | 2; 40 | 60 | 2; 45 | 60 | 2; 50 | 60 | 3; 55 | 60 | 3; 60 | 60 | 3; 68 | 60 | 3; 75 | 60 | 4; 80 | 60 | 4; 85 | 60 | 4; 90 | 60 | 4; 105 | 60 | 5; 112 | 60 | 5; 127 | 60 | 5; 152 | 60 | 5; Dia. | cutting depth | teeth No. — verify units and ordered drawing (alternative schedule 2): 20 | 160 | 1; 25 | 160 | 1; 30 | 160 | 1; 35 | 160 | 1; 40 | 160 | 2; 45 | 160 | 2; 50 | 160 | 2; 55 | 160 | 3; 60 | 160 | 3; 68 | 160 | 3; 75 | 160 | 4; 80 | 160 | 4; 85 | 160 | 4; 90 | 160 | 4; 105 | 160 | 5; 112 | 160 | 5; 127 | 160 | 6; 152 | 160 | 6
0307-232 | Universal hole saw ( Heavy duty)
Dia. | cutting depth | teeth No. | Thread — verify units and ordered drawing: 25 | 60 | 3 | M16; 35 | 60 | 3 | M16; 40 | 60 | 3 | M16; 45 | 60 | 3 | M16; 50 | 60 | 3 | M16; 55 | 60 | 5 | M16; 68 | 60 | 5 | M16; 75 | 60 | 5 | M16; 85 | 60 | 5 | M16; 105 | 60 | 5 | M16; 112 | 60 | 5 | M16; 127 | 60 | 5 | M16; 152 | 60 | 5 | M16
0307-233 | Arbor for universal hole saw
shank | thread | Drill | Drill height — verify units and ordered drawing: SDS plus shank | M16 | 8 | 80mm; Hexagon | M16 | 8 | 80mm
0307-234 | Nested hole saw wood working
set(pcs) | depth(mm) | size(mm) — verify units and ordered drawing: 3 | 22 | 60-67-74; 3 | 40 | 40-54-65; 4 | 33 | 25-35-43-53; 5 | 37 | 28-35-50-65-75; 5 | 22 | 60-67-74-81-95; 5 | 40 | 60-68-75-83-92; 6 | 23 | 25-32-40-45-54-65; 7 | 25 | 25-32-38-45-50-56-62; 7 | 50 | 25-32-38-45-50-56-62; 8 | 35 | 25-32-38-44-51-57-63-68
0307-235 | Carbon steel pull pressed hole saw
Construction / finish choices: standard; ground teeth; confirm availability for each size; Dia mm — verify units and ordered drawing: 19; 22; 25; 29; 32; 35; 41; 44; 48; 51; 54; 57; 64; 70; 76; 89; 92; 95; 102; 114; 127; 140; Fixed adj-drill
0307-236 | Arbors for high carbon steel hole saw
Drill | shank | Fit to hole saw — verify units and ordered drawing: 1/4” | 1/4 round | 3/4 - 1-1/8; 15/64 | 1/4 round | 3/4 - 1-1/8; 15/64 | 3/8 round | 1-1/4 - 5-1/2; 15/64 | 3/8 hex | 1-1/4 - 5-1/2; 1/4 | 1/4 round | 1-1/4 - 5-1/2; 1/4 | 1/4 quick change hex | 1-1/4 - 5-1/2
0307-237 | Doweling center
Dia | Unlabelled dimension — dimensional units and current drawing to confirm: 6.0mm | for board thickness from 12-14mm; 8.0 | for board thickness from 15-18mm; 10.0 | for board thickness from 19-30mm
0307-238 | Extension bar for spade drill
L1 Oal | L1 Oal — verify units and ordered drawing: 150mm | 6”; 180 | 7; 270 | 10-1/2; 300 | 12
0307-239 | Depth stop
Dia — dimensional units and current drawing to confirm: 6.0mm; 8.0; 10.0; 12.0
0307-240 | Jointing biscuits
size | Qty/bag — verify units and ordered drawing: 0# | 50pc; 10# | 50pc; 20# | 50pc
0307-241 | Fine-tooth non-carbide circular blades
Diameter / bore / teeth: 184 / 15.88 mm / 140T; 254 / 15.88 mm / 180T
0307-242 | Multi-material carbide-tipped circular blades
Diameter / bore / teeth: 190 / 30 mm / 38T; Metal-thickness reference: 1–2 mm; application requires confirmation
0307-243 | Metric woodworking carbide-tipped saws
Diameter / bore / teeth: 165 / 15.88 mm / 24T; 184 / 20 mm / 24T; 254 / 15.88 mm / 40T; 305 / 25.4 mm / 80T
0307-244 | Low-friction-coated woodworking circular saws
Diameter mm : teeth: 115/136/140 : 18/24/36; 150/160 : 18/24/40; 165/215 : 24/40/48/60; 184/200/210 : 24/40/60; 254 : 32/40/60/80; 305/350 : 80/100/120
0307-245 | Large carbide-tipped panel saw blades
Diameter / bore: 350 / 30 mm; Tooth options: 72T or 84T
0307-246 | Single/double scoring blades
Diameter / bore: 120 / 20 mm; Teeth: 24 single or 12+12 double
0307-247 | Precision panel-saw blades
Diameter / bore / teeth: 300 / 30 mm / 96T; Panel-thickness application reference: Below 35 mm
0307-248 | Auto-welded carbide multi-slotting blades
Size reference: 125 × 3T × 4/2.2 × 22.23 mm
0307-249 | Flax roller discs
Outer diameter × thickness: 190 × 6 mm; Bore: 60 mm; Temperature reference: 120°C; item-specific reference, not general heat suitability
0307-250 | Cotton saw blade
Blade type | thickness mm | outside diameter mm | bore mm | mass kg: 1 | 0.95 | 322 | 100 | 0.549; 2 | 0.95 | 322 | 61.8 | 0.585; Type 1 packing: 25 pieces/carton; 36 × 36 × 6 cm; gross/net 15/14 kg; approve current pack; Type 2 packing: 25 pieces/carton; 36 × 36 × 6 cm; gross/net 16/15 kg; approve current pack
0307-251 | Saw blade without carbide teeth
size | size — verify units and ordered drawing: 184x16x150T | 7-1/4”x5/8”x150T; 254x16x200T | 10”x5/8”x200T
0307-252 | Half-inch-fitting reciprocating blades
Shank: 1/2 inch; Length range: 152–300 mm; TPI options: 3, 5, 6, 10, 12
0307-253 | Carbide/HSS reciprocating-blade directions
Plasterboard / tube reference: 150 × 22 × 1.3 × 6T; 229 × 22 × 1.3 × 6T; Nailed-wood reference: 150 × 25 × 1.25 × 6/8T; 225 × 25 × 1.25 × 6/8T; Metal reference: 150 × 25 × 1.3 × 8T; 225 × 25 × 1.3 × 8T
0307-254 | M42 bi-metal reciprocating blades
Dimension × tooth references: 150 × 1.6 × 22 mm × 6T; 152 × 1.1 × 25.4 mm × 18T; 152 × 1.6 × 25.4 mm × 5T; 228 × 1.6 × 22 mm × 6T; 228 × 1.1 × 25.4 mm × 18T; 228 × 1.6 × 25.4 mm × 5T; 304 × 1.6 × 22 mm × 6T; Material: M42 bi-metal
0307-255 | Curved M42 bi-metal metal blades
Length × thickness × width / teeth: 200 × 0.96 × 19 mm / 14T or 10/14T; 250 × 1.27 × 19 mm / 14T or 10/14T
0307-256 | Reciprocating saw blades for used pallet
Size — verify units and ordered drawing: 200 x 0.9 x 19; 213 x 0.9 x 19; 200 x 1.25 x 19; 225 x 0.9 x 19
0307-257 | Circular chain saw
size — verify units and ordered drawing: 115x22.2; 125x22.2; 180x22.2; 230x22.2
0307-258 | Jig saw blade
Oal. | No.teeth | Unlabelled dimension | Unlabelled dimension — verify units and ordered drawing: 80 | 6 | milled | CRV; 80 | 10 | milled | CRV; 70 | 18 | milled | HSS; 70 | 21 | milled | HSS; 70 | 32 | milled | HSS; 80 | 10 | ground T/B | CRV; 70 | 12 | milled | CRV; 70 | 21 | milled | CRV; 100 | 8 | ground T/B | HSS; 100 | 10 | ground T/B | CRV; 100 | 6 | ground T/B | CRV; 75 | 21 | milled | HSS; 75 | 12 | milled | HSS; 75 | 32 | milled | HSS; 75 | 24 | milled | CRV; 75 | 12 | milled | CRV; 100 | 8 | milled | HSS; 100 | 6 | ground | CRV; 75 | 12 | milled | Bi-metal; 100 | 8 | milled | Bi-metal; 100 | 8 | milled | CRV
0307-259 | Reciprocating saw blades with 1/2" shank
L x width | L x width | Teeth No. | blade shape | blade shape — verify units and ordered drawing: 4 x 3/4” | 100x20mm | 6-14T | HCS | milled; 6 x 3/4 | 150x20 | 6-14T | HCS | milled; 7 x 3/4 | 175x20 | 6-14T | HCS | milled; 8 x 3/4 | 200x20 | 6-14T | HCS | milled; 9 x 3/4 | 230x20 | 6-14T | HCS | milled; 10 x 3/4 | 250x20 | 6-14T | HCS | milled; 12 x 3/4 | 300x20 | 6-14T | HCS | milled; 4 x 3/4 | 100x20 | 6-14T | HCS | ground; 6 x 3/4 | 150x20 | 6-14T | HCS | ground; 7 x 3/4 | 175x20 | 6-14T | HCS | ground; 8 x 3/4 | 200x20 | 6-14T | HCS | ground; 9 x 3/4 | 230x20 | 6-14T | HCS | ground; 10 x 3/4 | 250x20 | 6-14T | HCS | ground; 12 x 3/4 | 300x20 | 6-14T | HCS | ground; 4 x 3/4 | 100x20 | 6-14T | HSS | Bi-metal; 6 x 3/4 | 150x20 | 6-14T | HSS | Bi-metal; 7 x 3/4 | 175x20 | 6-14T | HSS | Bi-metal; 8 x 3/4 | 200x20 | 6-14T | HSS | Bi-metal; 9 x 3/4 | 230x20 | 6-14T | HSS | Bi-metal; 10 x 3/4 | 250x20 | 6-14T | HSS | Bi-metal; 12 x 3/4 | 300x20 | 6-14T | HSS | Bi-metal; 4 x 3/4 | 100x20 | 6-14T | HSS-E | Bi-metal; 6 x 3/4 | 150x20 | 6-14T | HSS-E | Bi-metal; 7 x 3/4 | 175x20 | 6-14T | HSS-E | Bi-metal; 8 x 3/4 | 200x20 | 6-14T | HSS-E | Bi-metal; 9 x 3/4 | 230x20 | 6-14T | HSS-E | Bi-metal; 10 x 3/4 | 250x20 | 6-14T | HSS-E | Bi-metal; 12 x 3/4 | 300x20 | 6-14T | HSS-E | Bi-metal
0307-260 | Wood carving disc
Dia. | type — verify units and ordered drawing: 85 | Flat; 100 | Flat; 110 | Flat; 115 | Flat; 125 | Flat; 85 | Beveled; 100 | Beveled; 110 | Beveled; 115 | Beveled; 125 | Beveled; 85 | Arc; 100 | Arc; 110 | Arc; 115 | Arc; 125 | Arc
0307-261 | Rotary rasp with 1/4” hex shank and power groove
size | type — verify units and ordered drawing: 5/8 x 1-1/8 x 1/4” | flat end cylinder; 5/8 x 1-1/8 x 1/4” | round end cylinder; 5/8 x 1-1/8 x 1/4” | tapered cone retry
0307-262 | Rotary files with 1/4” hex shank and power groove
size | type — verify units and ordered drawing: 1/2 x 1 x 1/4” | rounded front cylinder; 1/2 x 1 x 1/4 | square edge cylinder; 1/2 x 1 x 1/4 | tapered cone retry
0307-263 | Wheel rasp
Oal. | Oal. — verify units and ordered drawing: 125mm | 5”; 150 | 6”
0307-264 | Roto rasp with 1/4” hex shank
Dia | Oal — verify units and ordered drawing: 1-1/4” | 2”
0307-265 | Jig rasp
Oal | Oal — verify units and ordered drawing: 75mm | 3”; 100 | 4
0307-266 | Wood rasp
size — verify units and ordered drawing: 57x254mm 57x150mm
0307-267 | TCT blade grass cutting
Dia. | Dia. | No.of Teeth — verify units and ordered drawing: 230 | 9” | 36; 230 | 9 | 40; 250 | 10 | 36; 250 | 10 | 40; 255 | 10 | 40
0307-268 | Nylon mowing line
Dia | Shape — verify units and ordered drawing: 1.25mm | round; 1.6 | round; 2 | round; 2.4 | round; 3 | round; 3.3 | round; 2.0x2.0 | square; 2.4x2.4 | square; 3.3x3.3 | square
0307-269 | Grass trimmer head
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-270 | Grass trimmer
Dia. | Inner hole | Thickness | Teeth No. — verify units and ordered drawing: 205 | 25.4 | 1.5 | 2T; 205 | 25.4 | 1.8 | 2T; 205 | 25.4 | 3.0 | 2T; 255 | 25.4 | 1.5 | 2T; 255 | 25.4 | 1.8 | 2T; 255 | 25.4 | 3.0 | 2T; 305 | 25.4 | 1.5 | 2T; 305 | 25.4 | 1.8 | 2T; 305 | 25.4 | 3.0 | 2T; 300 | 25.4 | 3.0 | 2T; 255 | 25.4 | 3.0 | 3T; 305 | 25.4 | 3.0 | 3T; 255 | 25.4 | 1.4 | 3T; 230 | 25.4 | 1.4 | 4T; 255 | 25.4 | 1.4 | 4T; 230 | 25.4 | 1.4 | 8T; 255 | 25.4 | 1.4 | 8T; 230 | 25.4 | 1.4 | 80T; 255 | 25.4 | 1.4 | 80T
0307-271 | Carbide indexable blade
lengh x width x heigth | material — verify units and ordered drawing: 7.5 x 12 x 1.5 | K10; 9.6 x 12 x 1.5 | K10; 14.6 x 12 x 1.5 | K10; 20 x 12 x 1.5 | K10; 25 x 12 x 1.5 | K10; 30 x 12 x 1.5 | K10; 40 x 12 x 1.5 | K10; 50 x 12 x 1.5 | K10; 60 x 12 x 1.5 | K10
0307-272 | HSS replacement planer blades
L x W x H | material — verify units and ordered drawing: 56.0 x 5.5 x 1.1 | HSS; 60.0 x 5.5 x 1.1 | HSS; 75.5 x 5.5 x 1.1 | HSS; 78.0 x 5.5 x 1.1 | HSS; 80.5 x 5.5 x 1.1 | HSS; 82.0 x 5.5 x 1.1 | HSS; 92.0 x 5.5 x 1.1 | HSS; 102.0 x 5.5 x 1.1 | HSS
0307-273 | Straight edge moulder blade
L x W x H | material — verify units and ordered drawing: 210 x 30 x 3 | HSS; 310 x 30 x 3 | HSS; 410 x 30 x 3 | HSS; 510 x 30 x 3 | HSS; 610 x 30 x 3 | HSS; 820 x 30 x 3 | HSS; 920 x 30 x 3 | HSS; 1020 x 30 x 3 | HSS; 210 x 35 x 3 | HSS; 310 x 35 x 3 | HSS; 410 x 35 x 3 | HSS; 510 x 35 x 3 | HSS; 610 x 35 x 3 | HSS; 810 x 35 x 3 | HSS; 920 x 35 x 3 | HSS; 1020 x 35 x 3 | HSS; 319 x 18 x 3 | HSS
0307-274 | reversible planer blades
L x W x H | material — verify units and ordered drawing: 30 x 10 x 2.3 | HSS; 50 x 10 x 2.3 | HSS; 100 x 10 x 2.3 | HSS; 150 x 10 x 2.3 | HSS; 200 x 10 x 2.3 | HSS; 250 x 10 x 2.3 | HSS; 300 x 10 x 2.3 | HSS; 350 x 10 x 2.3 | HSS; 400 x 10 x 2.3 | HSS; 450 x 10 x 2.3 | HSS; 480 x 10 x 2.3 | HSS; 500 x 10 x 2.3 | HSS; 520 x 10 x 2.3 | HSS; 550 x 10 x 2.3 | HSS; 600 x 10 x 2.3 | HSS; 650 x 10 x 2.3 | HSS; 680 x 10 x 2.3 | HSS; 700 x 10 x 2.3 | HSS; 720 x 10 x 2.3 | HSS; 750 x 10 x 2.3 | HSS; 800 x 10 x 2.3 | HSS; 850 x 10 x 2.3 | HSS; 900 x 10 x 2.3 | HSS; 950 x 10 x 2.3 | HSS; 1000 x 10 x 2.3 | HSS; 1200 x 10 x 2.3 | HSS; 1400 x 10 x 2.3 | HSS; 1500 x 10 x 2.3 | HSS; 1600 x 10 x 2.3 | HSS; 1800 x 10 x 2.3 | HSS; 1900 x 10 x 2.3 | HSS; 2000 x 10 x 2.3 | HSS
0307-275 | Carbide reversible planer blades
L x W x H | material — verify units and ordered drawing: 82 x 29 x 3 | HM(TCT)
0307-276 | Planer blades
Construction / finish choices: TCT; HSS; confirm availability for each size; size — verify units and ordered drawing: 75.5x5.5x1.1; 82.7x5.5x1.1; 102x5.5x1.1; 82x5.5x1.1; 80.5x5.9x1.1
0307-277 | Zirconia flat finishing wheels
Diameters: 50, 75, 100, 115, 125 mm
0307-278 | Quick-lock zirconia discs
Diameters: 50 or 75 mm
0307-279 | Quick-lock nylon finishing discs
Diameters: 50 or 75 mm
0307-280 | Aluminium-oxide flap discs
Diameters: 100, 115, 125, 150, 180 mm; Grit: P40–P320
0307-281 | Ceramic/zirconia flap discs
Diameters: 100, 115, 125, 150, 180 mm; Grit: P40, P60, P80, P120
0307-282 | Diamond flap discs
Detailed diameter selection: 115 or 125 mm; Grit options: P80, P100, P120, P200, P400
0307-283 | Structured finishing papers
Grain references: A3, A5, A7, A9; confirm the actual grading system
0307-284 | Perforated sponge-backed abrasive rolls
Roll: 115 mm × 25 m; Pad: 115 × 125 mm; Quantity: 200 pads per roll
0307-285 | Mesh-backed sanding discs
Diameters: 125 or 150 mm; Grit: P40–P3000
0307-286 | Sponge sanding discs
Diameters: 125 or 150 mm; Grit: P80–P800
0307-287 | Aluminium-oxide film sanding discs
Diameters: 125 or 150 mm; Grit: P40–P2000
0307-288 | Microstructured fine sanding sponges
Diameters: 125 or 150 mm; Grit: P1000–P8000
0307-289 | Thin metal-cutting disc assortment
Pack: 52 pieces; Diameter × thickness × bore: 115 × 1.2 × 22.2 mm; Stated maximum speed: 13,300 rpm; verify each supplied wheel marking
0307-290 | T27A depressed grinding discs for metal
size:mm — verify units and ordered drawing: 100x4.0x16; 100x6.0x16; 115x4.0x22.2; 115x6.0x22.2; 125x4.0x22.2; 125x6.0x22.2; 150x4.0x22.2; 150x6.0x22.2; 180x4.0x22.2; 180x6.0x22.2; 180x8.0x22.2; 230x6.0x22.2; 230x6.5x22.2; 230x8.0x22.2
0307-291 | T41A cutting discs for metal
size:mm — verify units and ordered drawing: 100x2.0x16; 100x2.5x16; 100x3.0x16; 105x1.2x16; 105x2.0x16; 115x2.0x22.2; 115x2.5x22.2; 115x3.0x22.2; 125x2.0x22.2; 125x2.5x22.2; 125x3.0x22.2; 150x2.0x22.2; 150x2.5x22.2; 150x3.0x22.2; 180x2.0x22.2; 180x3.0x22.2; 230x2.0x22.2; 230x3.0x22.2; 255x3.0x25.4; 305x3.0x25.4; 355x3.0x25.4; 400x3.0x25.4; 115x3.2x22.2; 125x3.2x22.2; 180x3.2x22.2; 230x3.2x22.2
0307-292 | T42A depressed cutting discs for metal
size：mm — verify units and ordered drawing: 115x3.2x22.2; 125x3.2x22.2; 180x3.2x22.2; 230x3.2x22.2
0307-293 | T27WA depressed grinding discs for inox
size:mm — verify units and ordered drawing: 100x6.0x16; 115x6.0x22.2; 125x6.0x22.2; 150x6.0x22.2; 180x6.0x22.2; 180x7.0x22.2; 230x6.0x22.2; 230x7.0x22.2
0307-294 | T41WA cutting discs for inox
size:mm — verify units and ordered drawing: 100x1.0x16; 100x1.0x32; 100x1.6x16; 115x0.8x22.2; 115x1.0x22.2; 115x1.2x22.2; 115x1.6x22.2; 125x0.8x22.2; 125x1.0x22.2; 125x1.2x22.2; 125x1.6x22.2; 150x1.0x22.2; 150x1.2x22.2; 150x1.6x22.2; 150x2.5x22.2; 180x1.6x22.2; 180x3.0x22.2; 230x1.9x22.2; 230x3.0x22.2
0307-295 | Rubber backing pad
Dia.mm | Thread size — verify units and ordered drawing: 100 | M10x1.25/ M10x1.5/ M14x2; 115 | M10x1.5/ M14x2; 125 | M14x2/ M16x2; 150 | M14x2/ M16x2; 180 | M14x2/ M16x2; Dia.mm | Thread size — verify units and ordered drawing (alternative schedule 2): 100 | 1/4” shank; 115 | 1/4” shank; 125 | 1/4” shank; 150 | 1/4” shank; 180 | 1/4” shank; Dia.mm | Thread size — verify units and ordered drawing (alternative schedule 3): 80 | M14x2; 100 | M14x2; 125 | M14x2; Dia.mm | Thread size — verify units and ordered drawing (alternative schedule 4): 50 | 6mm shank. “R”; 75 | 6mm shank. “R”; 50 | 6mm shank. “S”; 75 | 6mm shank. “S”
0307-296 | Plastic backing pad
Dia.mm | Thread size — verify units and ordered drawing: 80 | M10x1.25/ M10x1.5/ M14x2; 100 | M10x1.25/ M10x1.5/ M14x2; 115 | M10x1.5/ M14x2; 125 | M14x2/ M16x2; 150 | M14x2/ M16x2; 180 | M14x2/ M16x2; Dia.mm | Thread size — verify units and ordered drawing (alternative schedule 2): 115 | M14x2; 180 | M16x2; Dia.mm | Thread size — verify units and ordered drawing (alternative schedule 3): 125 | M14x2; Dia.mm | Thread size — verify units and ordered drawing (alternative schedule 4): 100 | 1/4” shank; 115 | 1/4” shank; 125 | 1/4” shank; 150 | 1/4” shank; 180 | 1/4” shank
0307-297 | Sanding pad
Dia.mm | Thread size | Thread size | Hole No. — verify units and ordered drawing: 125 | 5/16”x24 | (10mm) | 6; 125 | 5/16”x24 | (10mm) | 8; 125 | 5/16”x24 | (16mm) | 5; 125 | 5/16”x24 | (16mm) | 6; Dia.mm | Thread size | Thread size | Unlabelled dimension — verify units and ordered drawing: 125 | 5/16”x24 | (10mm) | —; 150 | 5/16”x24 | (10mm) | —; 125 | 5/16”x24 | (16mm) | —; 150 | 5/16”x24 | (16mm) | —; Dia.mm | Thread size | Thread size | Hole No. — verify units and ordered drawing (alternative schedule 2): 125 | 5/16”x24 | (10mm) | 5; 150 | 5/16”x24 | (10mm) | 6; Dia.mm | Thread size | Unlabelled dimension | Unlabelled dimension — verify units and ordered drawing: 25 | 5/16”x24 | — | —; 50 | 5/16”x24 | — | —; 75 | 5/16”x24 | — | —
0307-298 | Rubber sanding block
size — verify units and ordered drawing: 120x65mm; 165x85mm
0307-299 | Aluminium-oxide angled flap-disc assortment
Pack: 20 pieces: 5 each of grit 40, 60, 80, 120; Diameter / bore: 4-1/2 / 7/8 inch; Shape: Angled type 29; Stated maximum speed: 13,300 rpm; supplied marking governs
0307-300 | Zirconia angled flap-disc assortment
Pack: 20 pieces: grit 40 × 10; 60 × 5; 80 × 3; 120 × 2; Diameter / bore: 4-1/2 / 7/8 inch; Shape: Angled type 29; Working-angle reference: 15–25°; confirm use instructions
0307-301 | Strip disc
Dia. | Thick. | Dia. Inner | Max speed rpm — verify units and ordered drawing: 90 | 15 | 16 | 11500; 100 | 15 | 16/22 | 11500; 115 | 15 | 22 | 11500; 125 | 15 | 22 | 10000; 150 | 15 | 22 | 8500; 180 | 15 | 22 | 6500
0307-302 | Strip disc with shaft
Dia. | Thickness | Inner hole. | Max speed RPM — verify units and ordered drawing: 50 | 15/30 | 6 | 18000; 63 | 15/30 | 6 | 18000; 75 | 15/30 | 6 | 12000; 100 | 15/30 | 6 | 6000; 125 | 15/30 | 6 | 4800
0307-303 | Soft TPU-backed sanding sponges
Diameters: 125 or 150 mm; Grit: P180–P3000; Fixing: Hook-and-loop direction
0307-304 | Film-backed sanding discs
Diameters: 100, 115, 125, 150 mm; Grit: P40–P2000; Dust extraction: With-hole or without-hole options
0307-305 | White hook-and-loop sanding discs
Diameters: 100, 115, 125, 150 mm; Grit: P60–P1200; Dust extraction: With-hole or without-hole options
0307-306 | Ceramic sanding discs with spiral holes
Diameters: 100, 115, 125, 150 mm; Grit: P40–P2500
0307-307 | Sanding sponge
size — dimensional units and current drawing to confirm: 96x70x25mm; 100x70x25; 120x100x10; 120x90x25; 120x100x25; 125x70x25
0307-308 | Plastic sanding block
Lengh | Width — verify units and ordered drawing: 230 | 80; 230 | 105; 230 | 120
0307-309 | Nylong end brush with round shank
Size — verify units and ordered drawing: 28
0307-310 | Nylong cup brush with round shank
Size — verify units and ordered drawing: 52; 64
0307-311 | Nylong wheel brush with round shank
Size — verify units and ordered drawing: 75; 100
0307-312 | Nylong end brush with round shank
Size — verify units and ordered drawing: 27
0307-313 | Nylong cup brush with round shank
Size — verify units and ordered drawing: 63
0307-314 | Knife brush
Size | Material — verify units and ordered drawing: 140x40 | steel; 140x40 | brass; 140x40 | stainless steel
0307-315 | Wheel brush for bench grinder crimped wire
Size — verify units and ordered drawing: 100; 125; 150; 175; 200; 250; 300
0307-316 | End brush with φ 6 shaft twisted wire
Size — verify units and ordered drawing: 25; 30
0307-317 | End brush with φ 6 shaft crimped wire
Size — verify units and ordered drawing: 17; 25
0307-318 | Circular brush with hole Ø 32/22mm crimped wire
Size — verify units and ordered drawing: 200x32; 250x32; 120x22; 150x22
0307-319 | Bevel brush with M14 nut twisted wire
Size — verify units and ordered drawing: 100; 120
0307-320 | Combination sharpening stone with wooden seat
size — verify units and ordered drawing: 100×25×12; 150×50×25; 200×50×25
0307-321 | Rectangle type sharpening stone
size | size — verify units and ordered drawing: 6”×2”×1” | 150×50×25mm; 8“×2”×1” | 200×50×25mm
0307-322 | Boat type sharpening stone
size | Unlabelled dimension — verify units and ordered drawing: 230×13mm | 9×1/2”
0307-323 | Diamond double-faced stone
size — verify units and ordered drawing: 4×1×1/4”
0307-324 | Folding diamond stone
size — verify units and ordered drawing: 1-1/10×4×3-3/8”
0307-325 | Flat type diamond whetstone
size — verify units and ordered drawing: 2”×6”
0307-326 | Multi purpose diamond sharpener
size — verify units and ordered drawing: 140mm
0307-327 | Multi purpose short diamond sharpener
size — verify units and ordered drawing: 100mm
0307-328 | Diamond bench stone
size | type — verify units and ordered drawing: 2-1/2×6×3/4 | coarse; 2-1/2×6×3/4 | fine
0307-329 | 4 side diamond bench stone
size — verify units and ordered drawing: 6×2×2”
0307-330 | Vitrified bond mounted points
Set | Dia | Length — verify units and ordered drawing: A1 | 3/4” | 3-1/2”; A2 | 1 | 1-1/4; A3 | 1 | 2-3/4; A4 | 1-1/4 | 1-1/4; A5 | 3/4 | 1-1/8; A6 | 3/4 | 1-1/8; A11 | 13/16 | 1-3/4; A12 | 11/16 | 1-1/4; A13 | 1-1/8 | 1-1/8; A14 | 11/16 | 7/8; A15 | 1/4 | 1-1/16; A21 | 1 | 1; A22 | 3/4 | 5/8; A23 | 3/4 | 1; A24 | 1/4 | 3/4; A25 | 1 | —; A26 | 5/8 | —; A31 | 1-3/8 | 1; A32 | 1 | 5/8; A33 | 1 | 1/2; A34 | 1-1/2 | 3/8; A35 | 1 | 3/8; A36 | 1-5/8 | 3/8; A37 | 1-1/4 | 1/4; A38 | 1 | 1; A39 | 3/4 | 3/4; A40 | 3/4 | —; A41 | 5/8 | 1-1/4; A42 | 1-1/4 | 3/8; B41 | 5/8 | 5/8; B42 | 1/2 | 3/4; B44 | 7/32 | 3/8; B51 | 7/16 | 3/4; B52 | 3/8 | 3/4; B53 | 5/16 | 5/8; B61 | 3/4 | 5/16; B62 | 1/2 | 3/8; B91 | 1/2 | 5/8; B92 | 1/4 | 1/4; B101 | 5/8 | 11/16; B103 | 5/8 | 3/16; B104 | 5/16 | 3/8; B111 | 7/16 | 11/16; B112 | 3/8 | 1/2; B121 | 1/2 | —; B122 | 3/8 | —
0307-331 | Grinding wheel
size — verify units and ordered drawing: 75×10×10; 75×10×13; 100×12×13; 100×20×16; 100×20×20; 125×15×16; 125×20×20; 150×20×20; 150×20×32; 150×25×32; 175×30×25; 200×20×32; 200×25×32; 200×40×20; 200×40×25; 250×25×32; 250×32×32; 300×32×32; 300×40×32
0307-332 | Three-piece wood-shaping wheel assortment
Pack: 3 pieces; Diameter / bore: 4 inch / 5/8 inch
0307-333 | Knurled brush
Size — verify units and ordered drawing: 85 x 20 x 10
0307-334 | Polishing sponges
Dia.mm | Thread size — verify units and ordered drawing: 150x50 | M14x2/ M16x2; 180x50 | M14x2/ M16x2; 200x50 | M14x2/ M16x2
0307-335 | Wool polishing bonnet
Dia.mm — dimensional units and current drawing to confirm: 50; 75
0307-336 | Felt buffing wheel
Felt buffing wheel — verify units and ordered drawing: 78x10mm; 125x15; 150x20; 6”x1/2”; 8”x1/2”
0307-337 | Spiral-stitched calico buffing wheels
电机尺寸 | 直径 宽度 | 接杆 — verify units and ordered drawing: 1/3 HP | 4" 1/2" | 1/2"-5/8"; 1/3-1/2HP | 6" 1/2" | 1/2"-5/8"; 1/3-3/4HP | 8" 1/2" | 1/2"-5/8"; 1/2---1-1/2HP | 10" 1/2" | 3/4"-7/8"; 1/2-3/4HP | 8" 7/8" | 1/2"-5/8"
0307-338 | Unstitched poplin buffing sections
电机尺寸 | 直径 宽度 | 接杆 — verify units and ordered drawing: 1/3 HP | 4" 1/2" | 1/2"-5/8"; 1/3-1/2HP | 6" 1/2" | 1/2"-5/8"; 1/3-3/4HP | 8" 1/2" | 1/2"-5/8"; 3/4---1-1/2HP | 10" 1/2" | 1/2"-5/8"; 3/4---1-1/2HP | 10" 1/2" | 3/4"-7/8"
0307-339 | Plane linen wheel
电机规格 | 直径 宽度 | 接杆 — verify units and ordered drawing: 1/3 HP | 4" 3/8" | 1/2"-5/8"; 1/3-1/2HP | 6" 3/8" | 1/2"-5/8"; 1/3-3/4HP | 8" 3/8" | 1/2"-5/8"; 3/4---1-1/2HP | 10" 3/8" | 1/2"-5/8"; 3/4-1-1/2HP | 10" 3/8" | 3/4"-7/8"
0307-340 | Fleece wheel
电机规格 | 直径 宽度 | 接杆 — verify units and ordered drawing: 1/3 HP | 3" 1/2" | 1/2"-5/8"; 1/3 HP | 4" 1/2" | 1/2"-5/8"; 1/3-1/2HP | 6" 1/2" | 1/2"-5/8"; 1/3-3/4HP | 8" 1/2" | 1/2"-5/8"; 3/4---1-1/2HP | 10" 1/2" | 3/4"-7/8"
0307-341 | Sanding mop flap flanging
Dia | Inner hole — verify units and ordered drawing: 100 | 22; 125 | 22
0307-342 | Flexi discs
Dia. | Dia. — verify units and ordered drawing: 115mm | 4-1/2”; 125 | 5
0307-343 | Flap wheels with shank
size | Grit | Max RPM — verify units and ordered drawing: 30x5x3 | 40-320 | 25000; 30x5x6 | 40-320 | 25000; 30x10x3 | 40-320 | 25000; 30x10x6 | 40-320 | 25000; 30x15x6 | 40-320 | 25000; 40x10x6 | 40-320 | 19100; 40x15x6 | 40-320 | 19100; 40x20x6 | 40-320 | 19100; 50x10x6 | 40-320 | 15300; 50x15x6 | 40-320 | 15300; 50x20x6 | 40-320 | 15300; 60x15x6 | 40-320 | 12700; 60x20x6 | 40-320 | 12700; 60x30x6 | 40-320 | 12700; 60x40x6 | 40-320 | 12700
0307-344 | Diamond flexible polishing discs
Dia.mm | Bore mm | Thickness mm — verify units and ordered drawing: 80 | 16 | 4; 100 | 16 | 4; 125 | 16/22.23 | 4; 200 | 16/22.23 | 4
0307-345 | Polishing floor pads
Dia.mm | Bore mm | Thickness mm — verify units and ordered drawing: 80 | 16 | 4; 100 | 16 | 4; 125 | 16/22.23 | 4; 150 | 16/22.23 | 4; 250 | 16/22.23 | 4
0307-346 | 105° angle extension screwdriver
Size — verify units and ordered drawing: 130
0307-347 | Angle screwdriver
Size — verify units and ordered drawing: 110
0307-348 | Universal angle grinder stand
size(mm) | Type — verify units and ordered drawing: 115/125 | Metal base; 180/230 | Metal base
0307-349 | Universal drill stand
size — verify units and ordered drawing: 43mm
0307-350 | Gardening scissors
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-351 | Adjustable spanner
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-352 | Adjustable wrenches
Length range: 6–12 inch
0307-353 | Quick-grip F clamps
Size options: 4, 6, 12, 18, 24, 36 inch
0307-354 | Adjustable strap wrenches
Material: ABS body; Weight reference: 380 g; Length options: 150 or 200 mm
0307-355 | Steel measuring tapes
Measuring range: 5000 mm
0307-356 | Wire cutter
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-357 | Wire strippers
Length: 160 mm
0307-358 | DIN3126 supper pro screwdriver bits
Dia — dimensional units and current drawing to confirm: 25; 29; 32; 38; 50; 65; 75; 89; 100; 120; 125; 130; 140; 150; 200; 300; 400; 500
0307-359 | Flexible shaft
size — verify units and ordered drawing: 6x900mm; 13x1300mm
0307-360 | Bits extension adaptor with pipe
Length — verify units and ordered drawing: 76mm
0307-361 | Socket adaptor
size | size — verify units and ordered drawing: 1/4”Square | 25mm; 1/4”Square | 50mm; 1/4”Square | 65mm; 1/4”Square | 75mm; 3/8”Square | 50mm; 3/8”Square | 65mm; 3/8”Square | 75mm; 1/2”Square | 50mm; 1/2”Square | 75mm; SDS shank — size | Unlabelled dimension — verify units and ordered drawing: 1/4”x65mm | —; 3/8”x65mm | —; 1/2”x75mm | —
0307-362 | Magnetic nut setter
Dia.mm | length(mm) — verify units and ordered drawing: 4 | 36; 5 | 36; 5.5 | 36; 6 | 36; 7 | 36; 8 | 36; 9 | 36; 10 | 36; 11 | 36; 12 | 36; 13 | 36; 4 | 42; 5 | 42; 5.5 | 42; 6 | 42; 7 | 42; 8 | 42; 9 | 42; 10 | 42; 11 | 42; 12 | 42; 13 | 42; 4 | 45; 5 | 45; 5.5 | 45; 6 | 45; 7 | 45; 8 | 45; 9 | 45; 10 | 45; 11 | 45; 12 | 45; 13 | 45; 4 | 48; 5 | 48; 5.5 | 48; 6 | 48; 7 | 48; 8 | 48; 9 | 48; 10 | 48; 11 | 48; 12 | 48; 13 | 48; 4 | 65; 5 | 65; 5.5 | 65; 6 | 65; 7 | 65; 8 | 65; 9 | 65; 10 | 65; 11 | 65; 12 | 65; 13 | 65
0307-363 | 1/4” DR.Bit fixed socket tool
size(mm) | L(mm) — verify units and ordered drawing: 4 | 37; 5.5 | 37; 6.5 | 37; 7 | 37
0307-364 | 3/8” DR.Bit fixed socket tool
size(mm) | L(mm) — verify units and ordered drawing: 4 | 48; 5.5 | 48; 6.5 | 48; 7 | 48; 4 | 75; 5.5 | 75; 6.5 | 75; 7 | 75
0307-365 | 1/4” DR.solid socked driver
size(mm) | L(mm) — verify units and ordered drawing: T10 | 25; T15 | 25; T20 | 25; T25 | 25; T27 | 25; T30 | 25; T40 | 25
0307-366 | DR. socked driver
1/4” DR.Sae Socket — size | Length | Unlabelled dimension — verify units and ordered drawing: 5/32” | 20.5/25.0 | —; 3/16 | 20.5/25.0 | —; 7/32 | 20.5/25.0 | —; 1/4 | 20.5/25.0 | —; 9/32 | 20.5/25.0 | —; 5/16 | 20.5/25.0 | —; 11/32 | 20.5/25.0 | —; 3/8 | 20.5/25.0 | —; 13/32 | 20.5/25.0 | —; 7/16 | 20.5/25.0 | —; 15/32 | 20.5/25.0 | —; 1/2 | 20.5/25.0 | —; 17/32 | 20.5/25.0 | —; 9/16 | 20.5/25.0 | —; 1/4” DR.Deep Socket (Metric) — size | Length | Dia.(mm) — verify units and ordered drawing: 4 | 50 | 12; 4.5 | 50 | 12; 5 | 50 | 12; 5.5 | 50 | 12; 6 | 50 | 12; 7 | 50 | 12; 8 | 50 | 12; 9 | 50 | 13; 10 | 50 | 14; 11 | 50 | 16; 12 | 50 | 17; 13 | 50 | 18; 14 | 50 | 20; 1/4” DR.Deep Socket (Sae) — size | Length | Dia.(mm) — verify units and ordered drawing: 5/32 | 50 | 12; 3/16 | 50 | 12; 7/32 | 50 | 12; 1/4 | 50 | 12; 9/32 | 50 | 12; 5/16 | 50 | 12; 11/32 | 50 | 13; 3/8 | 50 | 14; 7/16 | 50 | 16; 1/2 | 50 | 18; 9/16 | 50 | 20; 3/8” DR.Deep Socket (Metric) — size | Length | Dia.(mm) — verify units and ordered drawing: 8 | 63 | 17; 9 | 63 | 17; 10 | 63 | 17; 11 | 63 | 17; 12 | 63 | 17; 13 | 63 | 18; 14 | 63 | 20; 15 | 63 | 22; 16 | 63 | 22; 17 | 63 | 24; 18 | 63 | 25; 19 | 63 | 26; 20 | 63 | 28; 21 | 63 | 28; 22 | 63 | 30; 23 | 63 | 32; 24 | 63 | 32; 3/8” DR.Deep Socket (Sae) — size | Length | Dia.(mm) — verify units and ordered drawing: 5/16 | 63 | 17; 3/8 | 63 | 17; 7/16 | 63 | 17; 1/2 | 63 | 18; 9/16 | 63 | 20; 5/8 | 63 | 22; 11/16 | 63 | 24; 3/4 | 63 | 26; 7/8 | 63 | 30; 15/16 | 63 | 32; 1/2” DR.Deep Socket (Metric) — size | Length | Dia.(mm) — verify units and ordered drawing: 8 | 77 | 22; 9 | 77 | 22; 10 | 77 | 22; 11 | 77 | 22; 12 | 77 | 22; 13 | 77 | 22; 14 | 77 | 22; 15 | 77 | 22; 16 | 77 | 22; 17 | 77 | 24; 18 | 77 | 26; 19 | 77 | 26; 20 | 77 | 28; 21 | 77 | 28; 22 | 77 | 30; 23 | 77 | 32; 24 | 77 | 32; 26 | 77 | 36; 27 | 77 | 36; 28 | 77 | 38; 30 | 77 | 40; 32 | 77 | 42; 1/2” DR.Deep Socket (Sae) — size | Length | Dia.(mm) — verify units and ordered drawing: 5/16 | 77 | 22; 11/32 | 77 | 22; 3/8 | 77 | 22; 7/16 | 77 | 22; 15/32 | 77 | 22; 1/2 | 77 | 22; 9/16 | 77 | 22; 19/32 | 77 | 22; 5/8 | 77 | 22; 21/32 | 77 | 24; 11/16 | 77 | 26; 3/4 | 77 | 26; 25/32 | 77 | 28; 13/16 | 77 | 28; 7/8 | 77 | 32; 15/16 | 77 | 32; 1 | 77 | 34; 1-1/16 | 77 | 36; 1-1/8 | 77 | 38; 1-3/16 | 77 | 40; 1-1/4 | 77 | 42; Quarter-inch drive metric socket direction — size | Length | Unlabelled dimension — verify units and ordered drawing: 4 | 20.5/25.0 | —; 4.5 | 20.5/25.0 | —; 5 | 20.5/25.0 | —; 5.5 | 20.5/25.0 | —; 6 | 20.5/25.0 | —; 6.5 | 20.5/25.0 | —; 7 | 20.5/25.0 | —; 7.5 | 20.5/25.0 | —; 8 | 20.5/25.0 | —; 9 | 20.5/25.0 | —; 10 | 20.5/25.0 | —; 11 | 20.5/25.0 | —; 12 | 20.5/25.0 | —; 13 | 20.5/25.0 | —; 14 | 20.5/25.0 | —
0307-367 | DIN2185 Morse taper sleeves
MS.No.S | MS.No.T | D | d | L — units and drawing to confirm: 1 | 0 | 13 | 9.045 | 80; 2 | 1 | 18.6 | 12.065 | 92; 3 | 1 | 24.1 | 12.065 | 99; 3 | 2 | 24.7 | 17.78 | 112; 4 | 1 | 31.6 | 12.065 | 124; 4 | 2 | 31.6 | 17.78 | 124; 4 | 3 | 32.4 | 23.825 | 140; 5 | 1 | 44.7 | 12.065 | 156; 5 | 2 | 44.7 | 17.78 | 156; 5 | 3 | 44.7 | 23.825 | 156; 5 | 4 | 45.5 | 31.267 | 171; 6 | 1 | 63.8 | 12.065 | 218; 6 | 2 | 63.8 | 17.78 | 218; 6 | 3 | 63.8 | 23.825 | 218; 6 | 4 | 63.8 | 31.267 | 218; 6 | 5 | 63.8 | 44.399 | 218
0307-368 | 277 Morse taper sleeves
MS.No.S | MS.No.T | L | L1 | D | d | L2 | L3 — verify units and ordered drawing: 3 | 1 | 99 | 94 | 23.825 | 12.065 | 13.5 | 19; 3 | 2 | 112 | 94 | 23.825 | 17.78 | 5.5 | 22; 4 | 1 | 124 | 117.5 | 31.267 | 12.065 | 12.5 | 19; 4 | 2 | 124 | 117.5 | 31.267 | 17.78 | 16 | 22; 4 | 3 | 129.5 | 117.5 | 31.267 | 23.825 | 24 | 36
0307-369 | three jaw lathe chuck
Size — verify units and ordered drawing: 80x16; 100x20; 125x32; 160x42; 200x55; 250x76
0307-370 | four jaw lathe chuck
Size — verify units and ordered drawing: 80*22; 100*25; 125*30; 160*55; 200*70; 250*100
0307-371 | Dead center
MS.No.S | D | L — units and drawing to confirm: MS1 | 12.065 | 80; MS2 | 17.78 | 100; MS3 | 23.825 | 125; MS4 | 31.267 | 160; MS5 | 44.399 | 200; MS6 | 63.348 | 270; MS7 | 83.061 | 360
0307-372 | Half-Notched center
MS.No.S | D | h | L — units and drawing to confirm: MS1 | 12.065 | 7.6 | 80; MS2 | 17.78 | 11 | 100; MS3 | 23.825 | 15.05 | 100; MS4 | 31.267 | 20.8 | 160; MS5 | 44.399 | 29.35 | 200; MS6 | 63.348 | 41.9 | 270; MS7 | 83.061 | 53.78 | 360
0307-373 | Carbide Half-Notched center
MS.No. | h1 | h | D | L — units and drawing to confirm: MS1 | 1.5 | 5.5 | 12.065 | 80; MS2 | 2 | 6 | 17.78 | 100; MS3 | 3 | 9 | 23.825 | 125; MS4 | 5 | 12.5 | 31.267 | 160; MS5 | 7 | 16 | 44.399 | 200; MS6 | 10 | 22 | 63.348 | 270; MS7 | 12 | 24 | 83.061 | 360
0307-374 | Carbide center
MS.No. | D | L | d | d1 — units and drawing to confirm: MS1 | 12.065 | 80 | 12.2 | 8; MS2 | 17.78 | 100 | 18 | 8; MS3 | 23.825 | 125 | 24.1 | 12; MS4 | 31.267 | 160 | 31.6 | 15; MS5 | 44.399 | 200 | 44.7 | 18; MS6 | 63.348 | 270 | 63.8 | 24; MS7 | 83.061 | 360 | 83.555 | 24
0307-375 | Bull nose center
MS.No. | L | L1 | D | D1 | d | θ — verify units and ordered drawing: MS2 | 132 | 64 | 60 | 17.78 | 20 | 60°; MS2 | 135 | 64 | 61.9 | 17.78 | 12.7 | 70; MS3 | 152 | 81 | 76.2 | 23.825 | 19 | 70; MS3 | 170 | 81 | 100 | 23.825 | 30 | 60; MS3 | 164 | 81 | 100 | 23.825 | 32 | 75; MS4 | 232 | 102.5 | 160 | 31.267 | 40 | 60; MS4 | 225 | 102.5 | 160 | 31.267 | 35 | 75; MS5 | 252 | 129.5 | 200 | 44.399 | 40 | 75; MS5 | 281 | 129.5 | 250 | 44.399 | 57 | 75; MS6 | 320 | 182 | 200 | 63.348 | 40 | 75; MS6 | 355 | 182 | 250 | 63.348 | 57 | 75
0307-376 | Precision live center
MS.No. | L | D | L1 | d | D1 — units and drawing to confirm: MS1 | 124 | 36 | 27 | 15 | 12.065; MS2 | 139 | 45 | 34 | 20 | 17.78; MS3 | 176.5 | 60 | 47 | 25 | 23.825; MS4 | 217 | 70 | 53 | 32 | 31.267; MS5 | 273 | 90 | 65 | 40 | 44.399
0307-377 | Precision linght-duty live center
MS.No. | L | D | L1 | d | D1 — units and drawing to confirm: MS1 | 115 | 34 | 20.3 | 18 | 12.065; MS2 | 129.6 | 45 | 28.6 | 25 | 17.78; MS3 | 161.7 | 52 | 32.5 | 28 | 23.825; MS4 | 191.7 | 60 | 36.5 | 32 | 31.267; MS5 | 244.5 | 80 | 50.8 | 45 | 44.399; MS6 | 350.5 | 130 | 74.8 | 75 | 63.348; MS7 | 423.5 | 130 | 74.8 | 75 | 83.061
0307-378 | Precision live center
MS.No. | L | D | L1 | d | D1 — units and drawing to confirm: MS1 | 114 | 36 | 17 | 15 | 12.065; MS2 | 129 | 45 | 24 | 20 | 17.78; MS3 | 151.5 | 50 | 27.5 | 22 | 23.825; MS3 | 160.5 | 60 | 31 | 25 | 23.825; MS4 | 205 | 70 | 41 | 32 | 31.267; MS5 | 258.5 | 90 | 50.5 | 40 | 44.399; MS6 | 334 | 105 | 57.5 | 50 | 63.348; MS6 | 378 | 140 | 67 | 60 | 63.348
0307-379 | Medium-duty live center
MS.No. | L | L1 | D | D1 | d — units and drawing to confirm: MS1 | 115 | 20 | 34 | 12.065 | 18; MS2 | 145 | 26 | 45 | 17.78 | 25; MS3 | 170 | 30 | 52 | 23.825 | 28; MS4 | 205.7 | 34.7 | 60 | 31.267 | 32; MS5 | 254 | 45 | 77 | 44.399 | 45; MS6 | 362 | 68.5 | 125 | 63.348 | 75; MS1 | 125 | 30 | 34 | 12.065 | 18; MS2 | 155 | 36 | 45 | 17.78 | 25; MS3 | 183 | 43 | 52 | 23.825 | 28; MS4 | 222 | 51 | 60 | 31.267 | 32; MS5 | 272 | 63 | 77 | 44.399 | 45; MS6 | 382 | 88.5 | 125 | 63.348 | 75
0307-380 | Carbide Medium-duty live center
MS.No. | L | L1 | d | D | D1 | d1 — units and drawing to confirm: MS2 | 145 | 26 | 25 | 45 | 17.78 | 12; MS3 | 170 | 30 | 28 | 52 | 23.825 | 15; MS4 | 205.7 | 34.7 | 32 | 60 | 31.267 | 18; MS5 | 254 | 45 | 45 | 77 | 44.399 | 24; MS6 | 362 | 68.5 | 75 | 125 | 63.348 | 40
0307-381 | Medium-duty Multi-purpose live center
Interface and accessory geometry — MS.No. | D1 | L1 | A D2 | A L2 | B D2 | B L2 | C D2 | C L2 | D D2 | D L2 | E D2 | E D3 | E L2 | F D2 | F L2 | F d | G D2 | G L2 | G d; units to confirm: MS2 | 10 | 20 | 16 | 39 | 16 | 35.5 | 16 | 33 | 16 | 46 | 25 | 10 | 40 | 16 | 36 | 10 | 20 | 39 | 16; MS3 | 12 | 24 | 20 | 48 | 20 | 43.5 | 20 | 40.5 | 18 | 56 | 35 | 15 | 50 | 22 | 42 | 18 | 35 | 48 | 30; MS4 | 15 | 30 | 28 | 61.5 | 28 | 55.5 | 28 | 51.5 | 26 | 73 | 55 | 30 | 61.5 | 40 | 55 | 35 | 55 | 60 | 48; MS5 | 20 | 40 | 36 | 80 | 36 | 72.45 | 36 | 66.8 | 36 | 101 | 70 | 41 | 78 | 60 | 81 | 50 | 70 | 85 | 61; MS6 | 30 | 55 | 55 | 117 | 55 | 113 | 55 | 108 | 50 | 138 | 90 | 50 | 107.5 | 75 | 110 | 60 | 90 | 116 | 75
0307-382 | Light duty thread drill chuck
Range（mm） | Thread — verify units and ordered drawing: 0.6-6.5 | 3/8-24 UNF; 1.5-10 | 3/8-24 UNF; 1.5-10 | 1/2-20 UNF; 1.5-10 | M10x1.0; 1.5-10 | M10x1.25; 1.5-10 | M12x1.25; 1.5-13 | 3/8-24 UNF; 1.5-13 | 1/2-20 UNF; 1.5-13 | M12x1.0; 1.5-13 | M12x1.25; 1.5-13 | M14x1.0; 3-16 | 3/8-24 UNF; 3-16 | M12x1.25
0307-383 | Chuck key
size — dimensional units and current drawing to confirm: 6; 10; 13; 16; 19; 20
0307-384 | Heavy duty keyless morse & JT drill chuck
Range | Female Taper — verify units and ordered drawing: 0.3-4mm | JT0; 1/64-5/32” | JT0; 0.5-6mm | B10; 1/64-1/4” | JT1; 0.5-8mm | B12; 1/64-5/16” | JT2; 1-10mm | B12; 1/32-3/8” | JT2; 1-13mm | B16; 1/32-1/2” | JT33; 1-16mm | B18; 1/32-5/8” | JT6; 5-20mm | B22; 3/16-3/4” | JT3
0307-385 | Key type light duty morse & JT drill chuck
Range | Female Taper — verify units and ordered drawing: 0.6-6mm | B10; 1/16-1/4” | JT1; 1.5-10mm | B12; 1/16-3/8” | JT2; 1.5-13mm | B16; 1/16-1/2” | JT33; 3-16mm | B16; 3-16mm | B18; 1/8-5/8” | B16; 1/8-5/8” | B18
0307-386 | Keyless hand drill chuck thread
Range(mm) | Mounting thread — verify units and ordered drawing: 0.8-10 | 3/8-24 UNF; 0.8-10 | 1/2-20 UNF; 0.8-10 | M10x1.0; 0.8-10 | M10x1.25; 0.8-10 | M12x1.25; 2.0-13 | 3/8x24 UNF; 2.0-13 | 1/2x20 UNF; 2.0-13 | M12x1.0; 2.0-13 | M12x1.25
0307-387 | Heavy duty keyless thread drill chuck
Range | Female | Thread — verify units and ordered drawing: 0.5-6mm | M10x1 | 3/8”-24 UNF; 1/64-1/4” | M10x1 | 3/8”-24 UNF; 0.5-8mm | M10x1 | 3/8”-24 UNF; 1/64-5/16” | M12x1.25 | 1/2”-20 UNF; 1-10mm | M10x1 | 3/8”-24 UNF; 1/32-3/8” | M12x1.25 | 1/2”-20 UNF; 1-13mm | M12x1.25 | 1/2”-20 UNF; 1/32-1/2” | M12x1.25 | 1/2”-20 UNF; 1-16mm | M12x1.25 | 1/2”-20 UNF
0307-388 | Right angle drill attachment with handle & key
Unlabelled dimension | Unlabelled dimension — verify units and ordered drawing: 1/16”-3/8” CAP | 1.5mm-10mm
0307-389 | Side-cutting pliers
Length: 160 mm
0307-390 | Long-nose pliers
Length: 160 mm
0307-391 | Three-tool spiral tube-and-sheet drill set
Set: 3 pieces; Size references: 3–14; 5–20; 16–30.5 × 76 mm; Sheet-thickness application reference: Up to 3.0 mm; confirm work material
0307-392 | Mixed-material drill assortment with stops
Component groups: 78 HSS twist drills; 26 wood drills; 26 masonry drills; Accessories: 3 depth stops: 6, 8, 10 mm; hex key; Pack reference: 134 pieces, subject to confirmed bill of materials
0307-393 | Multi-material carbide-tip drill assortment
Set / sizes: 7 pieces: 4, 5, 6, 6, 8, 10, 12 mm; Shank: 6.35 mm quick-change hex
0307-394 | Black-and-gold jobber drill assortment
Set: 29 pieces; Sizes: 1/16–1/2 inch in 1/64 inch increments; Point angle: 135°
0307-395 | M2 annular-cutter assortment
Cutters: 1/2, 9/16, 11/16, 13/16, 15/16, 1-1/16 inch; Cut depth: 1 inch; Shank: 3/4 inch Weldon; Pack: 9 pieces including 6 cutters and 3 accessories
0307-396 | Four-flute wood-auger assortment
Pack: 5 pieces; Sizes: 1/2, 5/8, 3/4 × 2, 1 inch; Length: 6.5 inch; Shank: 1/4 inch quick-change hex
0307-397 | Small cut-off wheel and mandrel assortment
Pack reference: 27 wheels; confirm mandrel/accessory count separately; Wheel diameter × thickness × bore: 3 × 1/16 × 3/8 inch; Mandrel thickness range: 0.035–1/4 inch; Stated maximum speed: 25,000 rpm; verify supplied wheel marking
0307-398 | Depressed-centre metal grinding wheel pack
Pack: 14 pieces; Diameter × thickness × bore: 4-1/2 × 1/4 × 7/8 inch; Stated maximum speed: 13,300 rpm; supplied marking governs
0307-399 | Hex-shank Forstner assortment
Pack: 16 pieces; Diameters: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8, 2, 2-1/8 inch; Shank: 3/8 inch hex
0307-400 | Long wood-auger assortment with pencils
Pack: 8 pieces: 6 bits and 2 pencils; Bit diameters: 1/2, 5/8, 3/4, 7/8, 1, 1-1/4 inch; Bit length: 9 inch; Pencil length: 7 inch
0307-401 | 16pcs Bi-metal hole saw
Size options: 19,20,22,25,29,35,38,40,48,60,65,68,86mm 2pcs adaptor, 1pc extension 300mm; Type — verify units and ordered drawing: alu case
0307-402 | Five-blade reciprocating assortment
Pack: 5 pieces
0307-403 | 13pcs Bi-metal hole saw
Size options: 19, 22, 29, 35, 38, 44, 51, 57, 64mm, 2pcs arbors, 1pc adapter, 1pc pilot drill; Type — verify units and ordered drawing: alu case; BMC; Type — verify units and ordered drawing (alternative schedule 2): alu case
0307-404 | Multi-size metric thread-repair assortment
Thread references: M5 × 0.8; M6 × 1; M8 × 1.25; M10 × 1.5; M12 × 1.75; Materials: HSS cutting tools and stainless wire inserts; confirm exact grade
0307-405 | Thread repair kits assortment
Size options: 4pc thread insert M8-M12 6pc tap M8-M14 2pc insert drive M8-M10 3pc tap guide pin Ø8-Ø12 1pc insert guide rod 1pc knurled head; Type — verify units and ordered drawing: plastic box
0307-406 | 7pcs combined tap drill
Size options: M3,M4,M5,M6,M8,M10 1pc magnetic bits holder; Type — verify units and ordered drawing: metal case; Alu case
0307-407 | 110pcs tap and die
Size options: 35pc dies M2-M18 35pc taps M2-M18 35pc plug taps M2-M18 2pc tap wrench 1pc T type handle wrench 1pc die handle 1” O/D 1pc die handle 1-1/2” O/D; Type — verify units and ordered drawing: BMC
0307-408 | 32pcs tap and die
Size options: 7pc dies M3-M12 21pc taps M3-M12 1pc screwdriver 1pc adjustable tap wrench 1pc die stock handle wrench 1pc screw pitch gauge; Type — verify units and ordered drawing: metal box
0307-409 | Metric tap-and-die assortment
Thread selection: M3–M10; select the pitch for each tool from an approved bill of materials.; Type — verify units and ordered drawing: metal box
0307-410 | 11pcs diamond core bit
Size options: 38-52-65-117-127 x 150mm Hex extension SDS extension Hex adaptor SDS adaptor Taper pilot drill Drill key; Size — verify units and ordered drawing: 11pc
0307-411 | 5pcs laser welding diamond core bit
Size options: 38x150mm 52x150mm 65x150mm 117x150mm 127x150mm; Size — verify units and ordered drawing: 5pc
0307-412 | 5pcs diamond core bit
Size options: 38x150mm 52x150mm 65x150mm 117x150mm 127x150mm; Size — verify units and ordered drawing: Alu case
0307-413 | 4pcs diamond core bit
Size options: 38x150mm 65x150mm 127x150mm 1pc diamond disc segmented 300mm; Size — verify units and ordered drawing: BMC
0307-414 | 3pcs diamond core bit
Size options: 28x300mm 52x150mm 117x150mm; Size — verify units and ordered drawing: Alu case
0307-415 | 10pcs diamond disc
Size — verify units and ordered drawing: 115mm 10pc; 125mm 10pc
0307-416 | 10pcs diamond disc
Size — verify units and ordered drawing: 115mm 10pc
0307-417 | 5pcs diamond disc
Size — verify units and ordered drawing: 115mm 5pc
0307-418 | 3pcs diamond disc
Size — verify units and ordered drawing: 110mm 3pc; 115mm 3pc; 125mm 3pc
0307-419 | 5pcs diamond vacuum brazed hole saw
Size options: 20,35,40,45,68mm; Size — verify units and ordered drawing: Alu case
0307-420 | 4pcs diamond vacuum brazed hole saw
Size options: 5,6,8,10mm; Size — verify units and ordered drawing: plastic case
0307-421 | Adjustable wood countersink assortment
Pilot sizes: 7/64, 9/64, 11/64, 3/16, 7/32 inch; Countersink angle: 82°; Counterbore sizes: 3/8 and 1/2 inch; Shank: 1/4 inch quick-change hex; Driver lengths: 1 and 2 inch
0307-422 | 2pcs reciprocating saw blade
Size options: 6"X1.2X6T HCS; Size — verify units and ordered drawing: blister
0307-423 | 10pcs jig saw blade
Size — verify units and ordered drawing: T-shank
0307-424 | 5pcs jig saw blade
Size options: 100X1.3X10T HCS; Size — verify units and ordered drawing: T-shank
0307-425 | 5pcs jig saw blade
Size options: 100X1.0X8T HSS; Size — verify units and ordered drawing: T-shank
0307-426 | 2pcs jig saw blade
Size options: 100X1.3X10T HCS; Size — verify units and ordered drawing: T-shank
0307-427 | Multi-profile router assortment
Straight cutter diameters: 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 inch; 90° V grooves: 3/8, 1/2 inch; Dovetails: 1/2, 9/16 inch; Core boxes: R1/8, R3/16, R1/4 inch; Pilot: 1/4 inch; Bearing flush-trim diameter × length: 3/8 × 1/2; 3/8 × 1; 1/2 × 1/2; 1/2 × 1; 3/4 × 1 inch; Slotting diameters: 1/4, 5/16, 3/8, 1/2 inch; 45° chamfers: 3/8, 1/2, 5/8, 3/4 inch; Beading / round-over radii: R1/4, R3/8, R1/2 inch; Roman ogee radii: R5/32, R7/32, R9/32 inch; Ogee-panel radii: R1/4, R3/8 inch; Ogee-flute / wavy-edge radius: R3/16 inch; Classical cove radius: R5/16 inch; Classical radii: R3/16, R1/4 inch; Size — verify units and ordered drawing: alu case
0307-428 | Router bits assortment
Size options: core box 1/2" cove 7/8" dove tail 1/2" Chamfer 1-3/16" Flush trim 1/2" Straight 1/4", 1/2", 5/8" Round over 7/8", 1-1/4" V-groove 1/2" Roman ogee 1-1/16" 1pc diamond file; Size — verify units and ordered drawing: wood case
0307-429 | 3pcs diamond sharpener
type — verify units and ordered drawing: 3pcs
0307-430 | 5pcs diamond files
Size options: 120# grit 6" /8" /10" /12"; type — verify units and ordered drawing: 5pcs
0307-431 | Polished accessories tool set assortment
type — verify units and ordered drawing: plastic case; 1PC spanner | 3/8" — verify units and ordered drawing: 8PC small sand sleeve | 1/4"x1/2"; 8PC big sand sleeve | 1/2"x1/2"; 1PC ruber wheel | 1/8"x1"; 1PC wool bonnet | 1/4"x1"; 4PC wool bonnet | 1/4"x2/1"; 6PC alu oxide discs | 1/8"x13/16"; 6PC silicon carbide disc | 1/8"x13/16"; 2PC cutting discs | 1/20"x1-1/4"; 1PC flap wheel | 3/8"x1-1/4"; 1PC bullet wool grinding | 3/8"x3/4"; 3PC mini chuck | —; 2PC silicon carbide wheel | shank:1/8"; 3PC alu.oxide wheel | shank:1/8"; 1PC small drum sandar | 1/4"x1/2"; 1PC big drum sandar | 1/2"x1/2"; 2PC chuck | shank:1/8"; 1PC arbor | shank:1/8"; 5PC diamond mounted | shank:1/8"; 1PC end mill | shank:1/8"; 2PC brush | plate/pen; 3PC steel brush | cup/pen/plate; 1PC copper brushes | cup; 1PC grinding paster | —; 30PC cutting discs | 1/32"x15/16"; 36PC thin cutting discs | 1/64"x15/16"; 60PC sand paper | 180#,240#,320# each 20pcs; 1PC stone | 1"x3/8"x3/8"
0307-432 | 4pcs multifunction saw blade
Type — verify units and ordered drawing: multi function
0307-433 | 23pcs right angle drill&bits set
Size options: 3-Right Angle Drill Attachment With Handle & Key 7-Brad Point Drill Bits 4-5-6-7-8-9-10mm - 10mm keyed chuck 6-Titanium Saw Drills: 3 4 5 6 6.5 8mm 3-Drill depth stop 3-5-8mm 1-Allen Key: 2.5mm 3-Counter Sinker: 13 16 19mm; type — verify units and ordered drawing: BMC
0307-434 | Large drill, driver and hardware assortment
HSS drill sizes: 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6, 6.5, 8 mm; Wood drills: 3, 3, 4, 5, 5, 6, 6, 8 mm; Masonry drills: 3, 3, 4, 5, 5, 6, 6, 8, 10 mm; 50 mm drivers: Slotted 4/5; Phillips 1/2/3; cross-drive 1/2/3; 25 mm drivers: Slotted 3/4/5/6; Phillips and cross-drive 0/1/2/3; star 10/15/20/25/30; hex 3/4/5/6; square 0/1/2/3, mixed quantities; Spade / depth stops: 22 mm spade; 5, 6, 8, 10 mm stops; Hole saws: 32, 38, 44, 54 mm; Other components: Hole-saw arbor, hex key, countersink, magnetic holder and 180 dowels/screws; confirm quantities; type — verify units and ordered drawing: plastic case
0307-435 | Mixed drill and driving assortment with long bits
Flat wood bits: 300 mm long: 8, 10, 12, 14 mm; 150 mm long: 10, 12, 16, 20, 22, 32 mm; Wood drills: 4, 4, 5, 6, 7, 8, 9, 10 mm; Long masonry: 300 mm long: 8, 10, 12 mm; Standard masonry: 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10 mm; Nut drivers: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm; Stops: 3, 5, 8 mm; Driver quantities: 27 × 25 mm; 20 × 50 mm; Ti-treated HSS sizes: 1, 1.5, 2, 2.5, 3.2, 3.5, 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8 mm; mixed quantities; Black-finish HSS sizes: 1, 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 9, 10 mm; mixed quantities; Other components: Hole saws/arbor, countersink, magnetic extension, cupped nail punches, hex key, steel gauge and hex drills; type — verify units and ordered drawing: BMC
0307-436 | Large coated-drill and driver assortment
Ti-treated HSS sizes: 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 10, 11, 13 mm; mixed quantities; Masonry: 3, 4, 5, 6, 7, 8, 9, 10 mm; Wood: 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10 mm; Flat wood: 10, 12, 16, 18, 20, 25 mm; Hex HSS drills: 1.5, 2, 3, 4 mm; Sanding drums: 13, 19, 25, 25 mm; Hole saws: 32, 38, 44, 54 mm; 25 mm driver profiles: Slotted 3/4/5/5.5/6/7; Phillips and cross-drive 0/1/2/3; star 6/7/8/9/10/15/20/25/27/30/35/40; hex 1.5/2/2.5/3/3.5/4/4.5/5/6; square 1/2/3; Accessories: 60 mm magnetic holder, saw adapter, 3 stops and countersink; type — verify units and ordered drawing: BMC
0307-437 | 81pcs comb. drill
Size options: 10pc HSS drill TiN : 2, 2, 3, 3, 4, 4, 4.5, 5, 5.5, 6mm 5pc wood drill:4,5,6,8,10mm 5pc masonry drill: 4,5,6,8,10mm 40pc 25mm bits, 10pc 50mm bits 1pc bit holder 9pc nut driver: 5, 6, 7, 8, 9, 10, 11, 12, 13mm 1pc countersink; type — verify units and ordered drawing: BMC
0307-438 | Comb. drill assortment
Size options: 11pc HSS drill: 1.0- 6.0 4pc masonry drill: 4.0 -8.0 5pc wood drill: 3.0- 8.0 6pc socket : 4.0- 10.0 32pc bits 25mm; 12pc bits 50mm; 2pc flat wood bit 16,22; 1pc magnetic bit holder; 1pc countersink; 1pc guage.; type — verify units and ordered drawing: BMC
0307-439 | 49pcs comb. drill
Size options: 9pc HSS drill TiN: 2,2,3,3,4,5,6,8,10mm 5pc wood drill: 4,5,6,8,10mm 5pc masonry drill: 4,5,6,8,10mm 4pc spade drill: 10,13,16,19mm 4pc carbon hole saw: 32,38,45,54mm 1pc hole saw arbor 20pc bits 1pc bit holder; type — verify units and ordered drawing: BMC
0307-440 | 41pcs comb. drill
Size options: 4pc masonry drill, 11pc HSS drill, 4pc wood drill, 16pc bits, 4pc nut setter, 1pc countersink, 1pc bit holder.; type — verify units and ordered drawing: plastic case
0307-441 | 25pcs comb. drill
Size options: HSS drill hex shank: 4-5-6 mm 25mm: PZ1-2,PH1-2,SL4-5 50mm:PH2-T10-15-20-25-27-30-40 75mm:PH2-PZ2, Aaptor 1/4*50,3/8*50 Nut setter 48mm:6-8-10mm 1/4"x 60mm bit holder; type — verify units and ordered drawing: plastic case
0307-442 | Multi-material vacuum-brazed cutting discs
Size references: 105/115/125/180/230 × 5 × 22.23; confirm units and drawing
0307-443 | diamond disc granite, concrete and asphalt
Dia. | Hole | T/T | T/H — verify units and ordered drawing: 105 | 20 | 2.2 | 10; 115 | 22.23 | 2.2 | 10; 125 | 22.23 | 2.4 | 10; 150 | 22.23 | 2.4 | 10; 180 | 22.23 | 2.4 | 10; 200 | 22.23 | 2.4 | 10; 230 | 22.23 | 2.5 | 10; 250 | 25.4 | 2.5 | 10; 300 | 25.4 | 3.2 | 10; 350 | 25.4 | 3.2 | 10; 400 | 25.4 | 3.4 | 10; 450 | 25.4 | 3.6 | 10; 500 | 25.4 | 3.8 | 10; 600 | 25.4 | 4.4 | 10
0307-444 | Tuck point double diamond blade
Size options: 125*22.23*22*7T 125*22.23*25*7T 125*22.23*28*7T 150*22.23*22*7T 150*22.23*25*7T 150*22.23*28*7T 180*22.23*22*7T 180*22.23*25*7T 180*22.23*28*7T
0307-445 | ANSI B94.11 M HSS letter stub drill
Construction / finish choices: fully ground; Co.M35; confirm availability for each size; Dia. | L1 Oal | L2 Flute — verify units and ordered drawing: A | 2-7/16 | 1-5/16; B | 2-1/2 | 1-3/8; C | 2-1/2 | 1-3/8; D | 2-1/2 | 1-3/8; E | 2-1/2 | 1-3/8; F | 2-5/8 | 1-7/16; G | 2-5/8 | 1-7/16; H | 2-11/16 | 1-1/2; I | 2-11/16 | 1-1/2; J | 2-11/16 | 1-1/2; K | 2-11/16 | 1-1/2; L | 2-3/4 | 1-9/16; M | 2-3/4 | 1-9/16; N | 2-13/16 | 1-5/8; O | 2-15/16 | 1-11/16; P | 2-15/16 | 1-11/16; Q | 3 | 1-11/16; R | 3 | 1-11/16; S | 3-1/16 | 1-3/4; T | 3-1/16 | 1-3/4; U | 3-1/8 | 1-13/16; V | 3-1/4 | 1-7/8; W | 3-1/4 | 1-7/8; X | 3-15/16 | 1-15/16; Y | 3-15/16 | 1-15/16; Z | 3-3/8 | 2
0307-446 | ANSI B94.11 M aircraft extension 12” ground letter drill
Construction / finish choices: fully ground; Co.M35; confirm availability for each size; Diameter class; individual ordered drawing required: A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z
0307-447 | ANSI B94.11 M aircraft extension 12” fractional ground drill
Construction / finish choices: fully ground; Co.M35; confirm availability for each size; Diameter class; individual ordered drawing required: 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64, 1/2
0307-448 | Reduced-shank HSS drill families
Half-inch reduced-shank direction — diameter | overall | flute; inch references to confirm: 33/64 | 6” | 3-1/8; 17/32 | 6 | 3-1/8; 35/64 | 6 | 3-1/8; 9/16 | 6 | 3-1/8; 37/64 | 6 | 3-1/8; 19/32 | 6 | 3-1/8; 39/64 | 6 | 3-1/8; 5/8 | 6 | 3-1/8; 41/64 | 6 | 3-1/8; 21/32 | 6 | 3-1/8; 43/64 | 6 | 3-1/8; 11/16 | 6 | 3-1/8; 45/64 | 6 | 3-1/8; 23/32 | 6 | 3-1/8; 47/64 | 6 | 3-1/8; 3/4 | 6 | 3-1/8; 49/64 | 6 | 3; 25/32 | 6 | 3; 51/64 | 6 | 3; 13/16 | 6 | 3; 53/64 | 6 | 3; 55/64 | 6 | 3; 7/8 | 6 | 3; 57/64 | 6 | 3; 29/32 | 6 | 3; 59/64 | 6 | 3; 15/16 | 6 | 3; 61/64 | 6 | 3; 31/32 | 6 | 3; 63/64 | 6 | 3; 1 | 6 | 3; 1-1/64 | 6 | 3; 1-1/32 | 6 | 3; 1-3/64 | 6 | 3; 1-1/16 | 6 | 3; 1-3/32 | 6 | 3; 1-7/64 | 6 | 3; 1-1/8 | 6 | 3; 1-9/64 | 6 | 3; 1-5/32 | 6 | 3; 1-11/64 | 6 | 3; 1-3/16 | 6 | 3; 1-13/64 | 6 | 3; 1-7/32 | 6 | 3; 1-15/64 | 6 | 3; 1-1/4 | 6 | 3; 1-17/64 | 6 | 3; 1-9/32 | 6 | 3; 1-19/64 | 6 | 3; 1-5/16 | 6 | 3; 1-21/64 | 6 | 3; 1-11/32 | 6 | 3; 1-23/64 | 6 | 3; Three-quarter-inch reduced-shank direction — diameter references: 25/32, 13/16, 27/32, 7/8, 29/32, 15/16, 31/32, 1, 1-1/32, 1-1/16, 1-3/32, 1-1/8, 1-5/32, 1-3/16, 1-7/32, 1-1/4, 1-9/32, 1-5/16, 1-11/32, 1-3/8, 1-13/32, 1-7/16, 1-15/32, 1-1/2; Blacksmith drill direction — diameter | overall | flute; dimensional units to approved drawing: 6.0 | 150 | 75; 8.0 | 150 | 75; 10.0 | 150 | 75; 12.0 | 150 | 75; 14.0 | 150 | 75; 16.0 | 150 | 75; 18.0 | 150 | 75; 20.0 | 150 | 75; 22.0 | 150 | 75; 25.0 | 150 | 75
0307-449 | DIN338 Carbide tipped drill alloy steel straight shank
Dia. | L1 Oal | L2 Flute — verify units and ordered drawing: 2.0 | 49 | 24; 2.5 | 57 | 30; 3.0 | 61 | 33; 3.1 | 65 | 36; 3.2 | 65 | 36; 3.3 | 65 | 36; 3.5 | 70 | 39; 3.6 | 70 | 39; 4.0 | 75 | 43; 4.2 | 75 | 43; 4.3 | 80 | 47; 4.5 | 80 | 47; 4.8 | 86 | 52; 5.0 | 86 | 52; 5.1 | 86 | 52; 5.2 | 86 | 52; 5.3 | 86 | 52; 5.5 | 93 | 57; 5.8 | 93 | 57; 6.0 | 93 | 57; 6.5 | 101 | 63; 6.7 | 101 | 63; 6.8 | 109 | 69; 7.0 | 109 | 69; 7.1 | 109 | 69; 7.5 | 109 | 69; 8.0 | 117 | 75; 8.5 | 117 | 75; 9.0 | 125 | 81; 9.5 | 125 | 81; 10.0 | 133 | 87; 10.2 | 133 | 87; 10.5 | 133 | 87; 11.0 | 142 | 94; 11.5 | 142 | 94; 12.0 | 151 | 101; 12.5 | 151 | 101; 13.0 | 151 | 101; 13.5 | 160 | 108; 14.0 | 160 | 108; 14.5 | 169 | 114; 15.0 | 169 | 114; 15.5 | 178 | 120; 16.0 | 178 | 120
0307-450 | DIN338 Carbide tipped drill alloy steel straight shank
Dia. | L1 Oal | L2 Flute — verify units and ordered drawing: 3.0 | 61 | 33; 3.2 | 65 | 36; 3.5 | 70 | 39; 4.0 | 75 | 43; 4.5 | 80 | 47; 4.8 | 86 | 52; 5.0 | 86 | 52; 5.5 | 93 | 57; 6.0 | 93 | 57; 6.5 | 101 | 63; 7.0 | 109 | 69; 7.5 | 109 | 69; 8.0 | 117 | 75; 8.5 | 117 | 75; 9.0 | 125 | 81; 9.5 | 125 | 81; 10.0 | 133 | 87; 10.5 | 133 | 87; 11.0 | 142 | 94; 11.5 | 142 | 94; 12.0 | 151 | 101; 12.5 | 151 | 101; 13.0 | 151 | 101
0307-451 | DIN345 Carbide tipped drill HSS taper shank
Dia. | L1 Oal | L2 Flute | Morse taper — verify units and ordered drawing: 4.0 | 124 | 43 | 1#; 4.2 | 124 | 43 | 1#; 4.5 | 128 | 43 | 1#; 4.8 | 133 | 52 | 1#; 5.0 | 133 | 52 | 1#; 5.5 | 138 | 57 | 1#; 6.0 | 138 | 57 | 1#; 6.5 | 144 | 63 | 1#; 7.0 | 150 | 69 | 1#; 7.5 | 150 | 69 | 1#; 8.0 | 156 | 75 | 1#; 8.5 | 156 | 75 | 1#; 9.0 | 162 | 81 | 1#; 9.5 | 162 | 81 | 1#; 10.0 | 168 | 87 | 1#; 10.5 | 168 | 87 | 1#; 11.0 | 175 | 94 | 1#; 11.5 | 175 | 94 | 1#; 12.0 | 182 | 101 | 1#; 12.5 | 182 | 101 | 1#; 13.0 | 182 | 101 | 1#; 13.5 | 189 | 108 | 1#; 14.0 | 189 | 108 | 1#; 14.5 | 212 | 114 | 2#; 15.0 | 212 | 114 | 2#; 15.5 | 218 | 120 | 2#; 16.0 | 218 | 120 | 2#; 16.5 | 223 | 125 | 2#; 17.0 | 223 | 125 | 2#; 17.5 | 228 | 130 | 2#; 18.0 | 228 | 130 | 2#; 18.5 | 233 | 135 | 2#; 19.0 | 233 | 135 | 2#; 19.5 | 238 | 140 | 2#; 20.0 | 238 | 140 | 2#; 20.5 | 243 | 145 | 2#; 21.0 | 243 | 145 | 2#; 21.5 | 248 | 150 | 2#; 22.0 | 248 | 150 | 2#; 22.5 | 253 | 155 | 2#; 23.0 | 253 | 155 | 3#; 23.5 | 276 | 155 | 3#; 24.0 | 281 | 160 | 3#; 24.5 | 281 | 160 | 3#; 25.0 | 281 | 160 | 3#; 25.5 | 286 | 165 | 3#; 26.0 | 286 | 165 | 3#; 26.5 | 286 | 165 | 3#; 27.0 | 291 | 170 | 3#; 27.5 | 291 | 170 | 3#; 28.0 | 291 | 170 | 3#; 28.5 | 296 | 175 | 3#; 29.0 | 296 | 175 | 3#; 29.5 | 296 | 175 | 3#; 30.0 | 296 | 175 | 3#; 30.5 | 301 | 180 | 3#; 31.0 | 301 | 180 | 3#; 31.5 | 301 | 180 | 3#; 32.0 | 334 | 185 | 4#; 32.5 | 334 | 185 | 4#; 33.0 | 334 | 185 | 4#; 33.5 | 334 | 185 | 4#; 34.0 | 339 | 190 | 4#; 34.5 | 339 | 190 | 4#; 35.0 | 339 | 190 | 4#; 35.5 | 339 | 190 | 4#; 36.0 | 344 | 195 | 4#; 36.5 | 344 | 195 | 4#; 37.0 | 344 | 195 | 4#; 37.5 | 344 | 195 | 4#; 38.0 | 349 | 200 | 4#; 38.5 | 349 | 200 | 4#; 39.0 | 349 | 200 | 4#; 39.5 | 349 | 200 | 4#; 40.0 | 349 | 200 | 4#; 40.5 | 354 | 205 | 4#; 41.0 | 354 | 205 | 4#; 41.5 | 354 | 205 | 4#; 42.0 | 354 | 205 | 4#; 42.5 | 354 | 205 | 4#; 43.0 | 359 | 210 | 4#; 43.5 | 359 | 210 | 4#; 44.0 | 359 | 210 | 4#; 44.5 | 359 | 210 | 4#; 45.0 | 356 | 210 | 4#; 45.5 | 364 | 215 | 4#; 46.0 | 364 | 215 | 4#; 46.5 | 364 | 215 | 4#; 47.0 | 364 | 215 | 4#; 47.5 | 364 | 215 | 4#; 48.0 | 369 | 220 | 4#; 48.5 | 369 | 220 | 4#; 49.0 | 369 | 220 | 4#; 49.5 | 369 | 220 | 4#; 50.0 | 369 | 220 | 4#; 50.5 | 374 | 225 | 4#; 51.0 | 412 | 225 | 5#; 52.0 | 412 | 225 | 5#; 53.0 | 412 | 225 | 5#; 54.0 | 417 | 230 | 5#; 55.0 | 417 | 230 | 5#; 57.0 | 422 | 235 | 5#; 58.0 | 422 | 235 | 5#; 59.0 | 422 | 235 | 5#; 60.0 | 422 | 235 | 5#
0307-452 | DIN345 Carbide tipped drill carbon taper shank
Dia. | L1 Oal | L2 Flute | Morse taper — verify units and ordered drawing: 4.0 | 124 | 43 | 1#; 4.2 | 124 | 43 | 1#; 4.5 | 128 | 43 | 1#; 4.8 | 133 | 52 | 1#; 5.0 | 133 | 52 | 1#; 5.5 | 138 | 57 | 1#; 6.0 | 138 | 57 | 1#; 6.5 | 144 | 63 | 1#; 7.0 | 150 | 69 | 1#; 7.5 | 150 | 69 | 1#; 8.0 | 156 | 75 | 1#; 8.5 | 156 | 75 | 1#; 9.0 | 162 | 81 | 1#; 9.5 | 162 | 81 | 1#; 10.0 | 168 | 87 | 1#; 10.5 | 168 | 87 | 1#; 11.0 | 175 | 94 | 1#; 11.5 | 175 | 94 | 1#; 12.0 | 182 | 101 | 1#; 12.5 | 182 | 101 | 1#; 13.0 | 182 | 101 | 1#; 13.5 | 189 | 108 | 1#; 14.0 | 189 | 108 | 1#; 14.5 | 212 | 114 | 2#; 15.0 | 212 | 114 | 2#; 15.5 | 218 | 120 | 2#; 16.0 | 218 | 120 | 2#; 16.5 | 223 | 125 | 2#; 17.0 | 223 | 125 | 2#; 17.5 | 228 | 130 | 2#; 18.0 | 228 | 130 | 2#; 18.5 | 233 | 135 | 2#; 19.0 | 233 | 135 | 2#; 19.5 | 238 | 140 | 2#; 20.0 | 238 | 140 | 2#; 20.5 | 243 | 145 | 2#; 21.0 | 243 | 145 | 2#; 21.5 | 248 | 150 | 2#; 22.0 | 248 | 150 | 2#; 22.5 | 253 | 155 | 2#; 23.0 | 253 | 155 | 3#; 23.5 | 276 | 155 | 3#; 24.0 | 281 | 160 | 3#; 24.5 | 281 | 160 | 3#; 25.0 | 281 | 160 | 3#; 25.5 | 286 | 165 | 3#; 26.0 | 286 | 165 | 3#; 26.5 | 286 | 165 | 3#; 27.0 | 291 | 170 | 3#; 27.5 | 291 | 170 | 3#; 28.0 | 291 | 170 | 3#; 28.5 | 296 | 175 | 3#; 29.0 | 296 | 175 | 3#; 29.5 | 296 | 175 | 3#; 30.0 | 296 | 175 | 3#; 30.5 | 301 | 180 | 3#; 31.0 | 301 | 180 | 3#; 31.5 | 301 | 180 | 3#; 32.0 | 334 | 185 | 4#; 32.5 | 334 | 185 | 4#; 33.0 | 334 | 185 | 4#; 33.5 | 334 | 185 | 4#; 34.0 | 339 | 190 | 4#; 34.5 | 339 | 190 | 4#; 35.0 | 339 | 190 | 4#; 35.5 | 339 | 190 | 4#; 36.0 | 344 | 195 | 4#; 36.5 | 344 | 195 | 4#; 37.0 | 344 | 195 | 4#; 37.5 | 344 | 195 | 4#; 38.0 | 349 | 200 | 4#; 38.5 | 349 | 200 | 4#; 39.0 | 349 | 200 | 4#; 39.5 | 349 | 200 | 4#; 40.0 | 349 | 200 | 4#; 40.5 | 354 | 205 | 4#; 41.0 | 354 | 205 | 4#; 41.5 | 354 | 205 | 4#; 42.0 | 354 | 205 | 4#; 42.5 | 354 | 205 | 4#; 43.0 | 359 | 210 | 4#; 43.5 | 359 | 210 | 4#; 44.0 | 359 | 210 | 4#; 44.5 | 359 | 210 | 4#; 45.0 | 356 | 210 | 4#; 45.5 | 364 | 215 | 4#; 46.0 | 364 | 215 | 4#; 46.5 | 364 | 215 | 4#; 47.0 | 364 | 215 | 4#; 47.5 | 364 | 215 | 4#; 48.0 | 369 | 220 | 4#; 48.5 | 369 | 220 | 4#; 49.0 | 369 | 220 | 4#; 49.5 | 369 | 220 | 4#; 50.0 | 369 | 220 | 4#; 50.5 | 374 | 225 | 4#; 51.0 | 412 | 225 | 5#; 52.0 | 412 | 225 | 5#; 53.0 | 412 | 225 | 5#; 54.0 | 417 | 230 | 5#; 55.0 | 417 | 230 | 5#; 57.0 | 422 | 235 | 5#; 58.0 | 422 | 235 | 5#; 59.0 | 422 | 235 | 5#; 60.0 | 422 | 235 | 5#
0307-453 | HSS fully ground saw drill 135° split point
Dia. — dimensional units and current drawing to confirm: 3.0; 4.0; 5.0; 6.0; 6.5; 8.0; 9.0; 9.5; 10.0; 11.0; 12.0; 13.0
0307-454 | HSS fully ground saw drill 135° split point Hex shank
Dia. — dimensional units and current drawing to confirm: 3.0; 4.0; 5.0; 6.0; 6.5; 8.0; 9.0; 9.5; 10.0; 11.0; 12.0; 13.0
0307-455 | DIN333 center drill, Form A
Dia. | Shk Dia. | L1 Oal | L2 Flute — verify units and ordered drawing: 0.5 | 3.15 | 20 | 0.8; 0.8 | 3.15 | 20 | 1.1; 1.0 | 3.15 | 31.5 | 1.3; 1.25 | 3.15 | 31.5 | 1.6; 1.6 | 4.0 | 35.5 | 2.0; 2.0 | 5.0 | 40.0 | 2.5; 2.5 | 6.3 | 45 | 3.1; 3.15 | 8.0 | 50.0 | 3.9; 4.0 | 10.0 | 56.0 | 5.0; 5.0 | 12.5 | 63.0 | 6.3; 6.3 | 16.0 | 71.0 | 8.0; 8.0 | 20.0 | 80 | 10.1; 10.0 | 25.0 | 100 | 12.8; 12.5 | 31.5 | 125 | 16.5
0307-456 | DIN333 center drill, Form B
Dia. | Shk Dia. | Drill Dia. | L1 Oal | L2 Flute — verify units and ordered drawing: 1.0 | 4.0 | 2.12 | 35.5 | 1.3; 1.25 | 5.0 | 2.65 | 40.0 | 1.6; 1.6 | 6.3 | 3.35 | 45.0 | 2.0; 2.0 | 8.0 | 4.25 | 50.0 | 2.5; 2.5 | 10.0 | 5.3 | 56.0 | 3.1; 3.15 | 11.2 | 6.7 | 60.0 | 3.9; 4.0 | 14.0 | 8.5 | 67.0 | 5.0; 5.0 | 18.0 | 10.6 | 75.0 | 6.3; 6.3 | 20.0 | 13.2 | 80.0 | 8.0; 8.0 | 25.0 | 17.0 | 100.0 | 10.1; 10.0 | 31.5 | 21.2 | 125.0 | 12.8
0307-457 | DIN333 center drill, Form R
Dia. | Shk Dia. | L1 Oal | L2 Flute | r Radius — verify units and ordered drawing: 0.5 | 3.15 | 20.0 | 2.12 | 1.25-1.6; 0.8 | 3.15 | 20.0 | 2.65 | 2-2.5; 1.0 | 3.15 | 31.5 | 3.0 | 2.5-3.15; 1.25 | 3.15 | 31.5 | 3.35 | 3.15-4.0; 1.6 | 4.0 | 35.5 | 4.25 | 4.0-5.0; 2.0 | 5.0 | 40.0 | 5.3 | 5.0-6.3; 2.5 | 6.3 | 45.0 | 6.7 | 6.3-8.0; 3.15 | 8.0 | 50.0 | 8.5 | 8.0-10.0; 4.0 | 10.0 | 56.0 | 10.6 | 10.0-12.5; 5.0 | 12.5 | 63.0 | 13.2 | 12.5-16.0; 6.3 | 16.0 | 71.0 | 17.0 | 16.0-20.0; 8.0 | 20.0 | 80.0 | 21.2 | 20.0-25.0; 10.0 | 25.0 | 100.0 | 26.5 | 25.0-31.5; 12.5 | 31.5 | 125.0 | 33.5 | 31.5-40.0
0307-458 | DIN8374 HSS 90° subland drill with parallel shank
Construction / finish choices: HSS-E; confirm availability for each size; For Thread | step | Countersinker | Step Length | Flute Length | Total Length — verify units and ordered drawing: M3 | 3.2 | 6.0 | 9.0 | 57.0 | 93.0; M4 | 4.3 | 8.0 | 11.0 | 75.0 | 117.0; M5 | 5.3 | 10.0 | 13.0 | 87.0 | 133.0; M6 | 6.4 | 11.5 | 15.0 | 94.0 | 142.0; M8 | 8.4 | 15.0 | 19.0 | 114.0 | 169.0; M10 | 10.5 | 19.0 | 23.0 | 130.0 | 198.0
0307-459 | DIN8376 HSS 180° subland drill with parallel shank
Construction / finish choices: HSS-E; confirm availability for each size; For Thread | step | Countersinker | Step Length | Flute Length | Total Length — verify units and ordered drawing: M3 | 3.4 | 6.0 | 9.0 | 57.0 | 93.0; M4 | 4.5 | 8.0 | 11.0 | 75.0 | 117.0; M5 | 5.5 | 10.0 | 13.0 | 87.0 | 133.0; M6 | 6.6 | 11.0 | 15.0 | 94.0 | 142.0; M8 | 9.0 | 15.0 | 19.0 | 114.0 | 169.0; M10 | 11.0 | 18.0 | 23.0 | 130.0 | 191.0
0307-460 | DIN338 Type N HSS straight shank twist drill
Construction / finish choices: roll forged; confirm availability for each size; Dia | L1 Oal. | L2 Flute — verify units and ordered drawing: 1 | 34 | 12; 1.5 | 40 | 18; 2 | 49 | 24; 2.5 | 57 | 30; 3 | 61 | 33; 3.2 | 65 | 36; 3.5 | 70 | 39; 4 | 75 | 43; 4.5 | 80 | 47; 4.8 | 86 | 52; 5 | 86 | 52; 5.5 | 93 | 57; 6 | 93 | 57; 6.5 | 101 | 63; 7 | 109 | 69; 7.5 | 109 | 69; 8 | 117 | 75; 8.5 | 117 | 75; 9 | 125 | 81; 9.5 | 125 | 81; 10 | 133 | 87; 10.5 | 133 | 87; 11 | 142 | 94; 11.5 | 142 | 94; 12 | 151 | 101; 12.5 | 151 | 101; 13 | 151 | 101
0307-461 | DIN338 HSS hex shank drill
Dia. | L1 Oal | L2 Flute — verify units and ordered drawing: 1.5 | 40 | 18; 2 | 49 | 24; 2.5 | 57 | 30; 3 | 61 | 33; 3.5 | 70 | 39; 4 | 75 | 43; 4.5 | 80 | 47; 4.8 | 86 | 52; 5 | 86 | 52; 5.5 | 93 | 57; 6 | 93 | 57; 6.5 | 101 | 63; Dia. | L1 Oal | L2 Flute — verify units and ordered drawing (alternative schedule 2): 1.5 | 40 | 18; 2 | 49 | 24; 2.5 | 57 | 30; 3 | 61 | 33; 3.5 | 70 | 39; 4 | 75 | 43; 4.5 | 80 | 47; 4.8 | 86 | 52; 5 | 86 | 52; 5.5 | 93 | 57; 6 | 93 | 57; 6.5 | 101 | 63
0307-462 | HSS reduced shank drill
Dia | L1 Oal | L2 flute — verify units and ordered drawing: 10.5 | 133 | 87; 11 | 142 | 94; 11.5 | 142 | 94; 12 | 151 | 101; 12.5 | 151 | 101; 13 | 151 | 101; 13.5 | 160 | 108; 14 | 160 | 108; 14.5 | 169 | 114; 15 | 169 | 114; 15.5 | 178 | 120; 16 | 178 | 120; 16.5 | 184 | 125; 17 | 184 | 125; 17.5 | 191 | 130; 18 | 191 | 130; 18.5 | 198 | 135; 19 | 198 | 135; 19.5 | 205 | 140; 20 | 205 | 140; 20.5 | 225 | 145; 21 | 225 | 145; 21.5 | 230 | 150; 22 | 230 | 150; 22.5 | 230 | 155; 23 | 230 | 155; 23.5 | 230 | 155; 24 | 250 | 160; 24.5 | 250 | 160; 25 | 250 | 160
0307-463 | DIN338 HSS GT twist drill with split point
Dia | L1 Oal | L2 Flute — verify units and ordered drawing: 1 | 34 | 12; 1.5 | 40 | 18; 2 | 49 | 24; 2.5 | 57 | 30; 3 | 61 | 33; 3.2 | 65 | 36; 3.5 | 70 | 39; 4 | 75 | 43; 4.5 | 80 | 47; 4.8 | 86 | 52; 5 | 86 | 52; 5.5 | 93 | 57; 6 | 93 | 57; 6.5 | 101 | 63; 7 | 109 | 69; 7.5 | 109 | 69; 8 | 117 | 75; 8.5 | 117 | 75; 9 | 125 | 81; 9.5 | 125 | 81; 10 | 133 | 87; 10.5 | 133 | 87; 11 | 142 | 94; 11.5 | 142 | 94; 12 | 151 | 101; 12.5 | 151 | 101; 13 | 151 | 101; 13.5 | 160 | 108; 14 | 160 | 108; 14.5 | 169 | 114; 15 | 169 | 114; 15.5 | 178 | 120; 16 | 178 | 120
0307-464 | HSS aircraft extension fully ground drill
Dia | L1 Oal | L2 Flute — verify units and ordered drawing: 3 | 150 | 40; 3.5 | 150 | 45; 4 | 150 | 50; 4.5 | 150 | 54; 5 | 150 | 60; 5.5 | 150 | 65; 6 | 150 | 70; 6.5 | 150 | 70; 7 | 150 | 75; 7.5 | 150 | 75; 8 | 150 | 80; 8.5 | 150 | 85; 9 | 150 | 90; 9.5 | 150 | 92; 10 | 150 | 95; 10.5 | 150 | 100; 11 | 150 | 102; 11.5 | 150 | 105; 12 | 150 | 110; 12.5 | 150 | 110; 13 | 150 | 115; Dia | L1 Oal | L2 Flute — verify units and ordered drawing (alternative schedule 2): 3 | 300 | 40; 3.5 | 300 | 45; 4 | 300 | 50; 4.5 | 300 | 54; 5 | 300 | 60; 5.5 | 300 | 65; 6 | 300 | 70; 6.5 | 300 | 70; 7 | 300 | 75; 7.5 | 300 | 75; 8 | 300 | 80; 8.5 | 300 | 85; 9 | 300 | 90; 9.5 | 300 | 92; 10 | 300 | 95; 10.5 | 300 | 100; 11 | 300 | 102; 11.5 | 300 | 105; 12 | 300 | 110; 12.5 | 300 | 110; 13 | 300 | 115
0307-465 | DIN340 HSS straight shank long series twist drill
Construction / finish choices: roll forged; confirm availability for each size; Dia | L1 Oal | L2 Flute — verify units and ordered drawing: 2 | 85 | 56; 2.5 | 95 | 62; 3 | 100 | 66; 3.2 | 106 | 69; 3.5 | 112 | 73; 4 | 119 | 78; 4.5 | 126 | 82; 4.8 | 132 | 87; 5 | 132 | 87; 5.5 | 139 | 91; 6 | 139 | 91; 6.5 | 148 | 97; 7 | 156 | 102; 7.5 | 156 | 102; 8 | 165 | 109; 8.5 | 165 | 109; 9 | 175 | 115; 9.5 | 175 | 115; 10 | 184 | 121; 10.5 | 184 | 121; 11 | 195 | 128; 11.5 | 195 | 128; 12 | 205 | 134; 12.5 | 205 | 134; 13 | 205 | 134
0307-466 | DIN345 HSS metric taper shank twist drill, right hand
Dia | L1 Oal | L2 flute | Morse taper — verify units and ordered drawing: 4 | 124 | 43 | 1#; 4.2 | 124 | 43 | 1#; 4.5 | 128 | 43 | 1#; 4.8 | 133 | 52 | 1#; 5 | 133 | 52 | 1#; 5.5 | 138 | 57 | 1#; 6 | 138 | 57 | 1#; 6.5 | 144 | 63 | 1#; 7 | 150 | 69 | 1#; 7.5 | 150 | 69 | 1#; 8 | 156 | 75 | 1#; 8.5 | 156 | 75 | 1#; 9 | 162 | 81 | 1#; 9.5 | 162 | 81 | 1#; 10 | 168 | 87 | 1#; 10.5 | 168 | 87 | 1#; 11 | 175 | 94 | 1#; 11.5 | 175 | 94 | 1#; 12 | 182 | 101 | 1#; 12.5 | 182 | 101 | 1#; 13 | 182 | 101 | 1#; 13.5 | 189 | 108 | 1#; 14 | 189 | 108 | 1#; 14.5 | 212 | 114 | 2#; 15 | 212 | 114 | 2#; 15.5 | 218 | 120 | 2#; 16 | 218 | 120 | 2#; 16.5 | 223 | 125 | 2#; 17 | 223 | 125 | 2#; 17.5 | 228 | 130 | 2#; 18 | 228 | 130 | 2#; 18.5 | 233 | 135 | 2#; 19 | 233 | 135 | 2#; 19.5 | 238 | 140 | 2#; 20 | 238 | 140 | 2#; 20.5 | 243 | 145 | 2#; 21 | 243 | 145 | 2#; 21.5 | 248 | 150 | 2#; 22 | 248 | 150 | 2#; 22.5 | 253 | 155 | 2#; 23 | 253 | 155 | 3#; 23.5 | 276 | 155 | 3#; 24 | 281 | 160 | 3#; 24.5 | 281 | 160 | 3#; 25 | 281 | 160 | 3#; 25.5 | 286 | 165 | 3#; 26 | 286 | 165 | 3#; 26.5 | 286 | 165 | 3#; 27 | 291 | 170 | 3#; 27.5 | 291 | 170 | 3#; 28 | 291 | 170 | 3#; 28.5 | 296 | 175 | 3#; 29 | 296 | 175 | 3#; 29.5 | 296 | 175 | 3#; 30 | 296 | 175 | 3#; 30.5 | 301 | 180 | 3#; 31 | 301 | 180 | 3#; 31.5 | 301 | 180 | 3#; 32 | 334 | 185 | 4#; 32.5 | 334 | 185 | 4#; 33 | 334 | 185 | 4#; 33.5 | 334 | 185 | 4#; 34 | 339 | 190 | 4#; 34.5 | 339 | 190 | 4#; 35 | 339 | 190 | 4#; 35.5 | 339 | 190 | 4#; 36 | 344 | 195 | 4#; 36.5 | 344 | 195 | 4#; 37 | 344 | 195 | 4#; 37.5 | 344 | 195 | 4#; 38 | 349 | 200 | 4#; 38.5 | 349 | 200 | 4#; 39 | 349 | 200 | 4#; 39.5 | 349 | 200 | 4#; 40 | 349 | 200 | 4#; 40.5 | 354 | 205 | 4#; 41 | 354 | 205 | 4#; 41.5 | 354 | 205 | 4#; 42 | 354 | 205 | 4#; 42.5 | 354 | 205 | 4#; 43 | 359 | 210 | 4#; 43.5 | 359 | 210 | 4#; 44 | 359 | 210 | 4#; 44.5 | 359 | 210 | 4#; 45 | 356 | 210 | 4#; 45.5 | 364 | 215 | 4#; 46 | 364 | 215 | 4#; 46.5 | 364 | 215 | 4#; 47 | 364 | 215 | 4#; 47.5 | 364 | 215 | 4#; 48 | 369 | 220 | 4#; 48.5 | 369 | 220 | 4#; 49 | 369 | 220 | 4#; 49.5 | 369 | 220 | 4#; 50 | 369 | 220 | 4#; 50.5 | 374 | 225 | 4#; 51 | 412 | 225 | 5#; 52 | 412 | 225 | 5#; 53 | 412 | 225 | 5#; 54 | 417 | 230 | 5#; 55 | 417 | 230 | 5#; 56 | 417 | 230 | 5#; 57 | 422 | 235 | 5#; 58 | 422 | 235 | 5#; 59 | 422 | 235 | 5#; 60 | 422 | 235 | 5#
0307-467 | DIN1897 HSS straight shank stub drill
Construction / finish choices: roll forged; confirm availability for each size; Dia | L1 Oal | L2 Flute — verify units and ordered drawing: 1 | 26 | 6; 1.5 | 32 | 9; 2 | 38 | 12; 2.5 | 43 | 14; 3 | 46 | 16; 3.1 | 49 | 18; 3.2 | 49 | 18; 3.5 | 52 | 20; 4 | 55 | 22; 4.1 | 55 | 22; 4.2 | 55 | 22; 4.5 | 58 | 24; 5 | 62 | 26; 5.5 | 66 | 28; 6 | 66 | 28; 6.5 | 70 | 31; 7 | 74 | 34; 7.5 | 74 | 34; 8 | 79 | 37; 8.5 | 79 | 37; 9 | 84 | 40; 9.5 | 84 | 40; 10 | 89 | 43; 10.5 | 89 | 43; 11 | 95 | 47; 11.5 | 95 | 47; 12 | 102 | 51; 12.5 | 102 | 51; 13 | 102 | 51
0307-468 | HSS ground double end drill 135° split point
Construction / finish choices: HSS; confirm availability for each size; Dia | L1 Oal | L2 Flute — verify units and ordered drawing: 2.5 | 43 | 9.5; 3 | 46 | 11; 3.1 | 49 | 11; 3.2 | 49 | 11; 3.25 | 49 | 11; 3.3 | 49 | 11; 3.4 | 52 | 14; 3.5 | 52 | 14; 4 | 55 | 14; 4.1 | 55 | 14; 4.2 | 55 | 14; 4.5 | 58 | 17; 4.8 | 62 | 17; 5 | 62 | 17; 5.1 | 62 | 17; 5.2 | 62 | 17; 5.25 | 62 | 17; 5.5 | 66 | 20; 6 | 66 | 20; 6.5 | 70 | 20; 7 | 70 | 20; 7.5 | 70 | 20; 8 | 81 | 20
0307-469 | Guide drill
Dia | L1 Oal — verify units and ordered drawing: 5 | 90; 6 | 90; 7 | 90
0307-470 | HSS spot weld drill
Construction / finish choices: HSS; confirm availability for each size; Dia | L1 Oal — verify units and ordered drawing: 6 | 66; 7 | 74; 8 | 80; 10 | 88
0307-471 | DIN1869 VA deep hole ground drill
Dia | L1 Oal | L2 flute — verify units and ordered drawing: 2 | 125 | 85; 2.5 | 140 | 95; 3 | 150 | 100; 3.2 | 155 | 105; 3.3 | 155 | 105; 3.5 | 165 | 115; 4 | 175 | 120; 4.2 | 175 | 120; 4.5 | 185 | 125; 5 | 195 | 135; 5.5 | 205 | 140; 6 | 205 | 140; 6.5 | 215 | 150; 7 | 225 | 155; 7.5 | 225 | 155; 8 | 240 | 165; 8.5 | 240 | 165; 9 | 250 | 175; 9.5 | 250 | 175; 10 | 265 | 185; 10.5 | 265 | 185; 11 | 280 | 195; 11.5 | 280 | 195; 12 | 295 | 205; 12.5 | 295 | 205; 13 | 295 | 205; Dia | L1 Oal | L2 flute — verify units and ordered drawing (alternative schedule 2): 3 | 190 | 130; 3.2 | 200 | 135; 3.3 | 200 | 135; 3.5 | 210 | 145; 4 | 220 | 150; 4.2 | 220 | 150; 4.5 | 235 | 160; 5 | 245 | 170; 5.5 | 260 | 180; 6 | 260 | 180; 6.5 | 275 | 190; 7 | 290 | 200; 7.5 | 290 | 200; 8 | 305 | 210; 8.5 | 305 | 210; 9 | 320 | 220; 9.5 | 320 | 220; 10 | 340 | 235; 10.5 | 340 | 235; 11 | 365 | 250; 11.5 | 365 | 250; 12 | 375 | 260; 12.5 | 375 | 260; 13 | 375 | 260; Dia | L1 Oal | L2 flute — verify units and ordered drawing (alternative schedule 3): 3.5 | 265 | 180; 4 | 280 | 190; 4.2 | 280 | 190; 4.5 | 295 | 200; 5 | 315 | 210; 5.5 | 330 | 225; 6 | 330 | 225; 6.5 | 350 | 235; 7 | 370 | 250; 7.5 | 370 | 250; 8 | 390 | 265; 8.5 | 390 | 265; 9 | 410 | 280; 9.5 | 410 | 280; 10 | 430 | 295; 10.5 | 430 | 295; 11 | 455 | 310; 11.5 | 455 | 310; 12 | 480 | 330; 12.5 | 480 | 330; 13 | 480 | 330
0307-472 | HSS step drill CBN ground (metric/inch)
Construction / finish choices: straight flute; confirm availability for each size; Step | L1 Oal | Drilling range | Shk Dia. — verify units and ordered drawing: 5 | 54 | 4.8-10.65 | 6; 5 | 65 | 4.0-12.0 | 6; 7 | 69 | 5.0-28.0 | 9; 7 | 65 | 6.0-25.0 | 10; 7 | 85 | 12.5-30.5 | 12; 8 | 75 | 6.0-26.75 | 10; 8 | 75 | 6.0-32.0 | 10; 8 | 71 | 6.0-20.0 | 9; 9 | 65 | 4.0-12.0 | 6; 9 | 75 | 4.0-20.0 | 8; 9 | 76 | 6.0-32.0 | 13; 10 | 80 | 4.0-22.0 | 10; 10 | 85 | 9.0-36.0 | 12; 10 | 112 | 13.0-38.0 | 12; 11 | 90 | 5.0-30.5 | 10; 12 | 100 | 6.0-38.0 | 10; 12 | 100 | 6.0-37.0 | 10; 13 | 107 | 4.0-39.0 | 10; 14 | 100 | 4.0-30.0 | 10; 14 | 95 | 5.0-38.0 | 12; 16 | 105 | 6.0-40.0 | 13
0307-473 | DIN1869 VA deep hole cobalt ground drill
Dia | L1 Oal | L2 flute — verify units and ordered drawing: 2 | 125 | 85; 2.5 | 140 | 95; 3 | 150 | 100; 3.2 | 155 | 105; 3.3 | 155 | 105; 3.5 | 165 | 115; 4 | 175 | 120; 4.2 | 175 | 120; 4.5 | 185 | 125; 5 | 195 | 135; 5.5 | 205 | 140; 6 | 205 | 140; 6.5 | 215 | 150; 7 | 225 | 155; 7.5 | 225 | 155; 8 | 240 | 165; 8.5 | 240 | 165; 9 | 250 | 175; 9.5 | 250 | 175; 10 | 265 | 185; 10.5 | 265 | 185; 11 | 280 | 195; 11.5 | 280 | 195; 12 | 295 | 205; 12.5 | 295 | 205; 13 | 295 | 205; Dia | L1 Oal | L2 flute — verify units and ordered drawing (alternative schedule 2): 3 | 190 | 130; 3.2 | 200 | 135; 3.3 | 200 | 135; 3.5 | 210 | 145; 4 | 220 | 150; 4.2 | 220 | 150; 4.5 | 235 | 160; 5 | 245 | 170; 5.5 | 260 | 180; 6 | 260 | 180; 6.5 | 275 | 190; 7 | 290 | 200; 7.5 | 290 | 200; 8 | 305 | 210; 8.5 | 305 | 210; 9 | 320 | 220; 9.5 | 320 | 220; 10 | 340 | 235; 10.5 | 340 | 235; 11 | 365 | 250; 11.5 | 365 | 250; 12 | 375 | 260; 12.5 | 375 | 260; 13 | 375 | 260; Dia | L1 Oal | L2 flute — verify units and ordered drawing (alternative schedule 3): 3.5 | 265 | 180; 4 | 280 | 190; 4.2 | 280 | 190; 4.5 | 295 | 200; 5 | 315 | 210; 5.5 | 330 | 225; 6 | 330 | 225; 6.5 | 350 | 235; 7 | 370 | 250; 7.5 | 370 | 250; 8 | 390 | 265; 8.5 | 390 | 265; 9 | 410 | 280; 9.5 | 410 | 280; 10 | 430 | 295; 10.5 | 430 | 295; 11 | 455 | 310; 11.5 | 455 | 310; 12 | 480 | 330; 12.5 | 480 | 330; 13 | 480 | 330
0307-474 | JIS B4301-1999 HSS metric straight shank twist drill right hand
Dia | L1 Oal | L2 flute — verify units and ordered drawing: 2 | 55 | 29; 2.05 | 55 | 29; 2.1 | 55 | 29; 2.15 | 55 | 29; 2.2 | 58 | 33; 2.3 | 58 | 33; 2.4 | 61 | 35; 2.5 | 61 | 35; 2.6 | 64 | 37; 2.65 | 64 | 37; 2.7 | 64 | 37; 2.8 | 67 | 39; 2.9 | 71 | 42; 3 | 71 | 42; 3.1 | 71 | 42; 3.15 | 71 | 42; 3.2 | 71 | 42; 3.3 | 73 | 45; 3.4 | 73 | 45; 3.5 | 73 | 45; 3.6 | 76 | 48; 3.7 | 76 | 48; 3.8 | 76 | 48; 3.9 | 79 | 51; 4 | 83 | 54; 4.1 | 83 | 54; 4.2 | 83 | 54; 4.3 | 83 | 54; 4.4 | 86 | 56; 4.5 | 86 | 56; 4.6 | 86 | 56; 4.7 | 89 | 59; 4.8 | 89 | 59; 4.9 | 92 | 62; 5 | 92 | 62; 5.1 | 92 | 62; 5.2 | 95 | 64; 5.3 | 95 | 64; 5.4 | 95 | 64; 5.5 | 95 | 64; 5.6 | 98 | 67; 5.7 | 98 | 67; 5.8 | 98 | 67; 5.9 | 98 | 67; 6 | 102 | 70; 6.1 | 102 | 70; 6.2 | 102 | 70; 6.3 | 102 | 70; 6.4 | 105 | 73; 6.5 | 105 | 73; 6.6 | 105 | 73; 6.7 | 105 | 73; 6.8 | 105 | 73; 6.9 | 105 | 73; 7 | 105 | 73; 7.1 | 108 | 75; 7.2 | 108 | 75; 7.3 | 108 | 75; 7.4 | 111 | 78; 7.5 | 111 | 78; 7.6 | 111 | 78; 7.7 | 114 | 81; 7.8 | 114 | 81; 7.9 | 114 | 81; 8 | 114 | 81; 8.1 | 117 | 84; 8.2 | 117 | 84; 8.3 | 117 | 84; 8.4 | 121 | 87; 8.5 | 121 | 87; 8.6 | 121 | 87; 8.7 | 121 | 87; 8.8 | 124 | 89; 8.9 | 124 | 89; 9 | 124 | 89; 9.1 | 124 | 89; 9.2 | 127 | 92; 9.3 | 127 | 92; 9.4 | 127 | 92; 9.5 | 127 | 92; 9.6 | 130 | 95; 9.7 | 130 | 95; 9.8 | 130 | 95; 9.9 | 130 | 95; 10 | 130 | 95; 10.1 | 133 | 98; 10.2 | 133 | 98; 10.3 | 133 | 98; 10.4 | 133 | 98; 10.5 | 137 | 100; 10.7 | 137 | 100; 10.8 | 140 | 103; 10.9 | 140 | 103; 11 | 140 | 103; 11.1 | 140 | 103; 11.2 | 143 | 106; 11.3 | 143 | 106; 11.4 | 143 | 106; 11.5 | 143 | 106; 11.7 | 146 | 109; 11.8 | 146 | 109; 11.9 | 146 | 109; 12 | 149 | 111; 12.1 | 149 | 111; 12.3 | 149 | 111; 12.5 | 152 | 114; 12.7 | 152 | 114; 13 | 152 | 114
0307-475 | HSS straight shank fully ground left hand drill
Dia | L1 Oal | L2 flute — verify units and ordered drawing: 1.6 | 43 | 20; 1.65 | 43 | 20; 1.7 | 43 | 20; 1.75 | 46 | 22; 1.8 | 46 | 22; 1.85 | 46 | 22; 1.9 | 46 | 22; 1.95 | 49 | 24; 2 | 49 | 24; 2.1 | 49 | 24; 2.2 | 53 | 27; 2.3 | 53 | 27; 2.4 | 57 | 30; 2.5 | 57 | 30; 2.6 | 57 | 30; 2.7 | 61 | 33; 2.8 | 61 | 33; 2.9 | 61 | 33; 3 | 61 | 33; 3.1 | 65 | 36; 3.2 | 65 | 36; 3.3 | 65 | 36; 3.4 | 70 | 39; 3.5 | 70 | 39; 3.6 | 70 | 39; 3.7 | 70 | 39; 3.8 | 75 | 43; 3.9 | 75 | 43; 4 | 75 | 43; 4.1 | 75 | 43; 4.2 | 75 | 43; 4.3 | 80 | 47; 4.4 | 80 | 47; 4.5 | 80 | 47; 4.6 | 80 | 47; 4.7 | 80 | 47; 4.8 | 86 | 52; 4.9 | 86 | 52; 5 | 86 | 52; 5.2 | 86 | 52; 5.5 | 93 | 57; 5.6 | 93 | 57; 5.8 | 93 | 57; 6 | 93 | 57; 6.5 | 101 | 63; 7 | 109 | 69; 7.5 | 117 | 75; 8 | 117 | 75; 8.5 | 125 | 81; 9 | 125 | 81; 9.5 | 133 | 87; 10 | 133 | 87; 10.5 | 133 | 87; 11 | 142 | 94; 11.5 | 142 | 94; 12 | 151 | 101; 12.5 | 151 | 101; 13 | 151 | 101
0307-476 | HSS tube and sheet shell drill CBN ground
Type | Shank Dia | Drilling range | RPM — verify units and ordered drawing: A | 6.5 | 3-14 | 550; A | 10 | 6-20 | 500; A | 10 | 8-30 | 400; A | 10 | 20-42 | 300; A | 10 | 24-53 | 200; B | 6 | 2.5-7.8 | 550; B | 6 | 2.5-10.2 | 550; B | 6 | 2.5-11.8 | 550; B | 6 | 3-15 | 550
0307-477 | HSS twist drill Weldon shank
dia. | cutting depth | oal. — verify units and ordered drawing: 6 | 30 | 62; 6.5 | 30 | 62; 7 | 30 | 62; 7.5 | 30 | 62; 8 | 30 | 62; 8.5 | 30 | 62; 9 | 30 | 62; 9.5 | 30 | 62; 10 | 30 | 62; 10.5 | 30 | 62; 11 | 30 | 62; 11.5 | 30 | 62; 12 | 30 | 62; dia. | cutting depth | oal. — verify units and ordered drawing (alternative schedule 2): 6 | 55 | 88; 6.5 | 55 | 88; 7 | 55 | 88; 7.5 | 55 | 88; 8 | 55 | 88; 8.5 | 55 | 88; 9 | 55 | 88; 9.5 | 55 | 88; 10 | 55 | 88; 10.5 | 55 | 88; 11 | 55 | 88; 11.5 | 55 | 88; 12 | 55 | 88
0307-478 | Fully ground turbo-point HSS drills
Diameter range: 1.5–13.0 mm; Standard reference: DIN 338
0307-479 | DIN225 Die stock
size | Thickness | For tap size Metric | UNC/UNF | Pipe | Length — verify units and ordered drawing: 16 | 5.0 | M1-M2.6 | 1/16 - 3/32 | — | 160; 20 | 5.0 | M3-M4 | 1/8 - 5/32 | — | 200; 20 | 7.0 | M4.5-M6 | 3/16 - 1/4 | — | 200; 25 | 9.0 | M7-M9 | 5/16 | G1/16 | 224; 30 | 11.0 | M10-M11 | 3/8 - 7/16 | G1/8 | 280; 38 | 10.0 | MF12-MF14 | — | G1/4 | 315; 38 | 14.0 | M12-M14 | 1/2 - 9/16 | — | 315; 45 | 14.0 | MF16-MF20 | — | G3/8-G1/2 | 450; 45 | 18.0 | M16-M20 | 5/8 - 3/4 | — | 450; 55 | 16.0 | MF22-MF24 | — | G5/8-G3/4 | 560; 55 | 22.0 | M22-M24 | 7/8 - 1 | — | 560; 65 | 18.0 | MF27-MF36 | — | G7/8-G1 | 630; 65 | 25.0 | M27-M36 | 1-1/8 - 1-3/8 | — | 630; 75 | 20.0 | MF38-MF42 | — | G1-1/8-G1-1/4 | 800; 75 | 30.0 | M38-M42 | 1-1/2 - 1-5/8 | — | 800; 90 | 22.0 | MF45-MF52 | — | G1-3/8-G1-5/8 | 900; 90 | 36.0 | M45-M52 | 1-3/4 - 2 | — | 900; 105 | 22.0 | MF54-MF63 | — | G1-3/4-2 | 1000; 105 | 36.0 | M54-M63 | 2-1/4 - 2-3/4 | — | 1000
0307-480 | DIN8140 Wire threaded inserts
size — verify units and ordered drawing: M 2 x 0.4; M 2.2 x 0.45; M 2.5 x 0.45; M 3 x 0.5; M 3.5 x 0.6; M 4 x 0.7; M 5 x 0.8; M 6 x 1.0; M 7 x 1.0; M 8 x 1.25; M 8 x 1.0; M 9 x 1.25; M 10 x 1.5; M 10 x 1.25; M 10 x 1.0; M 11 x 1.5; M 12 x 1.75; M 12 x 1.5; M 12 x 1.25; M 12 x 1.0; M 14 x 2.0; M 14 x 1.5; M 14 x 1.25; M 14 x 1.0; M 16 x 2.0; M 16 x 1.5; M 18 x 2.5; M 18 x 2.0; M 18 x 1.5; M 20 x 2.5; M 20 x 2.0; M 20 x 1.5; M 22 x 2.5; M 22 x 2.0; M 22 x 1.5; M 24 x 3.0; M 24 x 2.0; M 24 x 1.5
0307-481 | Fitting-tools for threaded insert
size | For drill | For tap — verify units and ordered drawing: 5x0.8 | 5.2 | M5x0.8; 6x1.0 | 6.3 | M6x1.0; 8x1.25 | 8.4 | M8x1.25; 10x1.5 | 10.4 | M10x1.5; 12x1.75 | 12.4 | M12x1.75
0307-482 | Pin breaker
size | For drill | For tap — verify units and ordered drawing: 5x0.8 | 5.2 | M5x0.8; 6x1.0 | 6.3 | M6x1.0; 8x1.25 | 8.4 | M8x1.25; 10x1.5 | 10.4 | M10x1.5; 12x1.75 | 12.4 | M12x1.75
0307-483 | DIN223 HSS and alloy steel round die
Construction / finish choices: HSS; Alloy steel; confirm availability for each size; size | Outside — verify units and ordered drawing: No.0-80NF | 16×5; No.1-64NC | 16×5; No.1-72NF | 16×5; No.2-56NC | 16×5; No.2-64NF | 16×5; No.3-48NC | 16×5; No.3-56NF | 16×5; No.4-40NC | 16×5; No.4-48NF | 20×5; No.5-40NC | 20×5; No.5-44NF | 20×5; No.6-32NC | 20×5; No.6-40NF | 20×5; No.8-32NC | 20×5; No.8-36NF | 20×5; No.10-24NC | 20×7; No.10-32NF | 20×7; No.12-24NC | 20×7; No.12-28NF | 20×7; 1/4-20NC | 20×7; 1/4-28NF | 20×7; 5/16-18NC | 25×9; 5/16-24NF | 25×9; 3/8-16NC | 30×11; 3/8-24NF | 30×11; 7/16-14NC | 30×11; 7/16-20NF | 30×11; 1/2-13NC | 38×14; 1/2-20NF | 38×10; 9/16-12NC | 38×14; 9/16-18NF | 38×10; 5/8-11NC | 45×18; 5/8-18NF | 45×14; 3/4-10NC | 45×18; 3/4-16NF | 45×14; 7/8-9NC | 55×22; 7/8-14NF | 55×16; 1-12NF | 55×16; 1-14NC | 55×16; 1-1/8-7NC | 65×25; 1-1/8-12NF | 65×18; 1-1/4-7NC | 65×25; 1-1/4-12NF | 65×18; 1-3/8-6NC | 65×25; 1-3/8-12NF | 65×18; 1-1/2-6NC | 75×30; 1-1/2-12NF | 75×20; 1-3/4-5NC | 90×36; 2-4-1/2NC | 90×36
0307-484 | DIN223 UNC/UNF HSS and alloy steel round die
Construction / finish choices: HSS; Alloy steel; confirm availability for each size; size | Outside — verify units and ordered drawing: No.0-80NF | 16×5; No.1-64NC | 16×5; No.1-72NF | 16×5; No.2-56NC | 16×5; No.2-64NF | 16×5; No.3-48NC | 16×5; No.3-56NF | 16×5; No.4-40NC | 16×5; No.4-48NF | 20×5; No.5-40NC | 20×5; No.5-44NF | 20×5; No.6-32NC | 20×5; No.6-40NF | 20×5; No.8-32NC | 20×5; No.8-36NF | 20×5; No.10-24NC | 20×7; No.10-32NF | 20×7; No.12-24NC | 20×7; No.12-28NF | 20×7; 1/4-20NC | 20×7; 1/4-28NF | 20×7; 5/16-18NC | 25×9; 5/16-24NF | 25×9; 3/8-16NC | 30×11; 3/8-24NF | 30×11; 7/16-14NC | 30×11; 7/16-20NF | 30×11; 1/2-13NC | 38×14; 1/2-20NF | 38×10; 9/16-12NC | 38×14; 9/16-18NF | 38×10; 5/8-11NC | 45×18; 5/8-18NF | 45×14; 3/4-10NC | 45×18; 3/4-16NF | 45×14; 7/8-9NC | 55×22; 7/8-14NF | 55×16; 1-12NF | 55×16; 1-14NC | 55×16; 1-1/8-7NC | 65×25; 1-1/8-12NF | 65×18; 1-1/4-7NC | 65×25; 1-1/4-12NF | 65×18; 1-3/8-6NC | 65×25; 1-3/8-12NF | 65×18; 1-1/2-6NC | 75×30; 1-1/2-12NF | 75×20; 1-3/4-5NC | 90×36; 2-4-1/2NC | 90×36
0307-485 | HSS and alloy steel round die 25mm outside diameter
Construction / finish choices: Alloy steel; HSS; confirm availability for each size; Thread | Pitch | Outside — verify units and ordered drawing: M3 | 0.5 | 25×9; M4 | 0.7 | 25×9; M5 | 0.8 | 25×9; M6 | 1 | 25×9; M8 | 1.25 | 25×9; M10 | 1.5 | 25×9; M12 | 1.75 | 25×9; 1”O.D.alloy steel fractional size round die — Thread | Pitch — verify units and ordered drawing: 1/4 | 20NC; 1/4 | 28NF; 5/16 | 18NC; 5/16 | 24NF; 3/8 | 16NC; 7/16 | 14NC; 7/16 | 20NF; 1/2 | 13NC
0307-486 | DIN382 HSS and alloy steel Hexagon die
High speed steel — Thread | Pitch | Outside — verify units and ordered drawing: M3 | 0.35 | 19×5; M3 | 0.5 | 19×5; M3.5 | 0.6 | 19×5; M4 | 0.7 | 19×5; M5 | 0.5 | 19×5; M5 | 0.8 | 19×7; M6 | 0.75 | 19×5; M6 | 1 | 19×7; M8 | 0.75 | 22×9; M8 | 1.25 | 22×9; M10 | 1 | 27×11; M10 | 1.5 | 27×11; M12 | 1 | 36×10; M12 | 1.75 | 36×14; M14 | 1 | 36×14; M14 | 1.5 | 36×10; M14 | 2 | 36×14; M16 | 1.5 | 41×14; M16 | 2 | 41×18; M18 | 1.5 | 41×14; M18 | 2 | 41×14; M18 | 2.5 | 41×18; M20 | 1.5 | 41×14; M20 | 2 | 41×14; M20 | 2.5 | 41×18; M22 | 1.5 | 50×16; M22 | 2 | 50×16; M22 | 2.5 | 50×22; M24 | 1.5 | 50×16; M24 | 2 | 50×16; M24 | 3 | 50×22; M27 | 1.5 | 60×18; M27 | 2 | 60×18; M27 | 3 | 60×25; M30 | 1.5 | 60×18; M30 | 2 | 60×18; M30 | 3.5 | 60×25; Alloy-steel direction — size | Outside | Unlabelled dimension — verify units and ordered drawing: M3×0.35 | 19×5 | —; M3×0.5 | 19×5 | —; M3.5×0.6 | 19×5 | —; M4×0.5 | 19×5 | —; M4×0.7 | 19×5 | —; M4.5×0.75 | 19×7 | —; M5×0.5 | 19×5 | —; M5×0.8 | 19×7 | —; M6×0.75 | 19×5 | —; M6×1 | 19×7 | —; M7×0.75 | 22×9 | —; M8×1 | 22×9 | —; M8×0.75 | 22×9 | —; M8×1.25 | 22×9 | —; M9×1 | 22×9 | —; M9×1.25 | 22×9 | —; M10×1 | 27×11 | —; M10×1.5 | 27×11 | —; M12×1 | 36×10 | —; M12×1.25 | 36×10 | —; M12×1.5 | 36×10 | —; M12×1.75 | 36×14 | —; M14×1 | 36×14 | —; M14×1.25 | 36×10 | —; M14×1.5 | 36×10 | —; M14×2 | 36×14 | —; M16×1.5 | 41×14 | —; M16×2 | 41×18 | —; M18×1.5 | 41×14 | —; M18×2 | 41×14 | —; M18×2.5 | 41×18 | —; M20×1.5 | 41×14 | —; M20×2 | 41×14 | —; M20×2.5 | 45×18 | —; M22×1.5 | 50×16 | —; M22×2 | 50×16 | —; M22×2.5 | 50×22 | —; M24×1.5 | 50×16 | —; M24×2 | 50×16 | —; M24×3 | 50×22 | —; M27×1.5 | 60×18 | —; M27×2 | 60×18 | —; M27×3 | 60×25 | —; M28×1.5 | 60×18 | —; M30×1.5 | 60×18 | —; M30×2 | 60×18 | —; M30×3.5 | 60×25 | —; M33×1.5 | 60×18 | —; M33×2 | 60×18 | —; M33×3.5 | 60×25 | —; M36×1.5 | 60×18 | —; M36×2 | 60×18 | —; M36×3 | 60×25 | —; M36×4 | — | —
0307-487 | ISO2568 HSS and alloy steel round die
Construction / finish choices: Alloy steel; HSS; confirm availability for each size; Thread | Pitch | Outside — verify units and ordered drawing: M1 | 0.2 | 16×5; M1 | 0.25 | 16×5; M1.2 | 0.2 | 16×5; M1.2 | 0.25 | 16×5; M1.4 | 0.2 | 16×5; M1.4 | 0.3 | 16×5; M1.6 | 0.2 | 16×5; M1.6 | 0.35 | 16×5; M1.8 | 0.2 | 16×5; M1.8 | 0.35 | 16×5; M2 | 0.2 | 16×5; M2 | 0.4 | 16×5; M2.2 | 0.25 | 16×5; M2.2 | 0.45 | 16×5; M2.5 | 0.35 | 16×5; M2.5 | 0.45 | 16×5; M3 | 0.35 | 20×5; M3 | 0.5 | 20×5; M3.5 | 0.35 | 20×5; M3.5 | 0.6 | 20×5; M4 | 0.5 | 20×5; M4 | 0.7 | 20×5; M4.5 | 0.5 | 20×5; M4.5 | 0.75 | 20×5; M5 | 0.5 | 20×5; M5 | 0.8 | 20×7; M5.5 | 0.5 | 20×5; M6 | 0.75 | 20×7; M6 | 1 | 20×7; M7 | 0.75 | 25×9; M7 | 1 | 25×9; M8 | 0.75 | 25×9; M8 | 1 | 25×9; M8 | 1.25 | 25×9; M10 | 0.75 | 30×11; M10 | 1 | 30×11; M10 | 1.25 | 30×11; M10 | 1.5 | 30×11; M12 | 1 | 38×10; M12 | 1.25 | 38×10; M12 | 1.5 | 38×10; M12 | 1.75 | 38×14; M16 | 1 | 45×14; M16 | 1.5 | 45×14; M16 | 2 | 45×18; M18 | 1 | 45×14; M18 | 1.5 | 45×14; M18 | 2 | 45×14; M18 | 2.5 | 45×18; M20 | 1 | 45×14; M20 | 1.5 | 45×14; M20 | 2 | 45×14; M20 | 2.5 | 45×18; M24 | 1 | 55×16; M24 | 1.5 | 55×16; M24 | 2 | 55×16; M24 | 3 | 55×22; M27 | 1 | 65×18; M27 | 1.5 | 65×18; M27 | 2 | 65×18; M27 | 3 | 65×25; M30 | 1 | 65×18; M30 | 1.5 | 65×18; M30 | 2 | 65×18; M30 | 3 | 65×25; M30 | 3.5 | 65×25
0307-488 | DIN885 HSS side&face milling cutter straight tooth
size | Width face | Hole Dia — verify units and ordered drawing: 2” | 3/16 | 1/2; 2 | 1/4 | 1/2; 2 | 5/16 | 1/2; 2 | 3/8 | 1/2; 2 | 3/16 | 5/8; 2 | 1/4 | 5/8; 2 | 5/16 | 5/8; 2 | 3/8 | 5/8; 2 | 1/4 | 7/8; 2 | 5/16 | 7/8; 2 | 3/8 | 7/8; 2 | 7/16 | 7/8; 2-1/2 | 3/16 | 7/8; 2-1/2 | 1/4 | 7/8; 2-1/2 | 5/16 | 7/8; 2-1/2 | 3/8 | 7/8; 2-1/2 | 7/16 | 7/8; 2-1/2 | 1/2 | 7/8; 2-1/2 | 9/16 | 7/8; 2-1/2 | 5/8 | 7/8; 2-1/2 | 3/16 | 1; 2-1/2 | 1/4 | 1; 2-1/2 | 5/16 | 1; 2-1/2 | 3/8 | 1; 2-1/2 | 7/16 | 1; 2-1/2 | 1/2 | 1; 2-1/2 | 9/16 | 1; 2-1/2 | 5/8 | 1; 3 | 3/16 | 1; 3 | 7/32 | 1; 3 | 1/4 | 1; 3 | 9/32 | 1; 3 | 5/16 | 1; 3 | 11/32 | 1; 3 | 3/8 | 1; 3 | 13/32 | 1; 3 | 7/16 | 1; 3 | 1/2 | 1; 3 | 9/16 | 1; 3 | 5/8 | 1; 3 | 11/16 | 1; 3 | 3/4 | 1; 3 | 13/16 | 1; 3 | 7/8 | 1; 3 | 15/16 | 1; 3 | 1 | 1; 3 | 3/16 | 1-1/4; 3 | 7/32 | 1-1/4; 3 | 1/4 | 1-1/4; 3 | 9/32 | 1-1/4; 3 | 5/16 | 1-1/4; 3 | 11/32 | 1-1/4; 3 | 3/8 | 1-1/4; 3 | 13/32 | 1-1/4; 3 | 7/16 | 1-1/4; 3 | 1/2 | 1-1/4; 3 | 9/16 | 1-1/4; 3 | 5/8 | 1-1/4; 3 | 11/16 | 1-1/4; 3 | 3/4 | 1-1/4; 3 | 13/16 | 1-1/4; 3 | 7/8 | 1-1/4; 3 | 15/16 | 1-1/4; 3 | 1 | 1-1/4; 3-1/2 | 3/16 | 1; 3-1/2 | 1/4 | 1; 3-1/2 | 5/16 | 1; 3-1/2 | 3/8 | 1; 3-1/2 | 7/16 | 1; 3-1/2 | 1/2 | 1; 3-1/2 | 5/8 | 1; 3-1/2 | 7/16 | 1-1/4; 3-1/2 | 1/2 | 1-1/4; 4 | 3/16 | 1; 4 | 7/32 | 1; 4 | 1/4 | 1; 4 | 9/32 | 1; 4 | 5/16 | 1; 4 | 11/32 | 1; 4 | 3/8 | 1; 4 | 13/32 | 1; 4 | 7/16 | 1; 4 | 1/2 | 1; 4 | 9/16 | 1; 4 | 5/8 | 1; 4 | 11/16 | 1; 4 | 3/4 | 1; 4 | 13/16 | 1; 4 | 7/8 | 1; 4 | 15/16 | 1; 4 | 1 | 1; 4 | 1-1/8 | 1; 4 | 1-1/4 | 1; 4 | 1-1/2 | 1; 4 | 3/16 | 1-1/4; 4 | 7/32 | 1-1/4; 4 | 1/4 | 1-1/4; 4 | 9/32 | 1-1/4; 4 | 5/16 | 1-1/4; 4 | 11/32 | 1-1/4; 4 | 3/8 | 1-1/4; 4 | 13/32 | 1-1/4; 4 | 7/16 | 1-1/4; 4 | 1/2 | 1-1/4; 4 | 9/16 | 1-1/4; 4 | 5/8 | 1-1/4; 4 | 11/16 | 1-1/4; 4 | 3/4 | 1-1/4; 4 | 13/16 | 1-1/4; 4 | 7/8 | 1-1/4; 4 | 15/16 | 1-1/4; 4 | 1 | 1-1/4; 4 | 1-1/8 | 1-1/4; 4 | 1-1/4 | 1-1/4; 4 | 1-1/2 | 1-1/4; 4-1/2 | 3/8 | 1-1/4; 4-1/2 | 7/16 | 1-1/4; 4-1/2 | 1/2 | 1-1/4; 5 | 1/4 | 1; 5 | 9/32 | 1; 5 | 5/16 | 1; 5 | 11/32 | 1; 5 | 3/8 | 1; 5 | 13/32 | 1; 5 | 7/16 | 1; 5 | 1/2 | 1; 5 | 9/16 | 1; 5 | 5/8 | 1; 5 | 11/16 | 1; 5 | 3/4 | 1; 5 | 13/16 | 1; 5 | 7/8 | 1; 5 | 15/16 | 1; 5 | 1 | 1; 5 | 1/4 | 1-1/4; 5 | 9/32 | 1-1/4; 5 | 5/16 | 1-1/4; 5 | 11/32 | 1-1/4; 5 | 3/8 | 1-1/4; 5 | 13/32 | 1-1/4; 5 | 7/16 | 1-1/4; 5 | 1/2 | 1-1/4; 5 | 9/16 | 1-1/4; 5 | 5/8 | 1-1/4; 5 | 11/16 | 1-1/4; 5 | 3/4 | 1-1/4; 5 | 13/16 | 1-1/4; 5 | 7/8 | 1-1/4; 5 | 15/16 | 1-1/4; 5 | 1 | 1-1/4; 5 | 1-1/4 | 1-1/4; 6 | 1/4 | 1; 6 | 5/16 | 1; 6 | 3/8 | 1; 6 | 7/16 | 1; 6 | 1/2 | 1; 6 | 9/16 | 1; 6 | 5/8 | 1; 6 | 11/16 | 1; 6 | 3/4 | 1; 6 | 13/16 | 1; 6 | 7/8 | 1; 6 | 15/16 | 1; 6 | 1 | 1; 6 | 1-1/4 | 1; 6 | 1/4 | 1-1/4; 6 | 9/32 | 1-1/4; 6 | 5/16 | 1-1/4; 6 | 11/32 | 1-1/4; 6 | 3/8 | 1-1/4; 6 | 13/32 | 1-1/4; 6 | 7/16 | 1-1/4; 6 | 1/2 | 1-1/4; 6 | 9/16 | 1-1/4; 6 | 5/8 | 1-1/4; 6 | 11/16 | 1-1/4; 6 | 3/4 | 1-1/4; 6 | 13/16 | 1-1/4; 6 | 7/8 | 1-1/4; 6 | 15/16 | 1-1/4; 6 | 1 | 1-1/4; 6 | 1-1/8 | 1-1/4; 6 | 1-1/4 | 1-1/4; 7 | 1/4 | 1-1/4; 7 | 5/16 | 1-1/4; 7 | 3/8 | 1-1/4; 7 | 7/16 | 1-1/4; 7 | 1/2 | 1-1/4; 7 | 9/16 | 1-1/4; 7 | 5/8 | 1-1/4; 7 | 11/16 | 1-1/4; 7 | 3/4 | 1-1/4; 7 | 13/16 | 1-1/4; 7 | 7/8 | 1-1/4; 7 | 15/16 | 1-1/4; 7 | 1 | 1-1/4; 8 | 1/4 | 1-1/4; 8 | 5/16 | 1-1/4; 8 | 3/8 | 1-1/4; 8 | 7/16 | 1-1/4; 8 | 1/2 | 1-1/4; 8 | 9/16 | 1-1/4; 8 | 5/8 | 1-1/4; 8 | 11/16 | 1-1/4; 8 | 3/4 | 1-1/4; 8 | 13/16 | 1-1/4; 8 | 7/8 | 1-1/4; 8 | 15/16 | 1-1/4; 8 | 1 | 1-1/4; 8 | 1/4 | 1-1/2; 9 | 1/4 | 1-1/4; 9 | 3/8 | 1-1/4; 9 | 1/2 | 1-1/4; 9 | 5/8 | 1-1/4; 9 | 3/4 | 1-1/4; 9 | 1 | 1-1/4; 10 | 5/8 | 1-1/4; 10 | 3/4 | 1-1/4; 10 | 1/4 | 1-1/2; 10 | 5/16 | 1-1/2; 10 | 3/8 | 1-1/2; 10 | 7/16 | 1-1/2; 10 | 1/2 | 1-1/2; 10 | 9/16 | 1-1/2; 10 | 5/8 | 1-1/2; 10 | 11/16 | 1-1/2; 10 | 3/4 | 1-1/2; 10 | 13/16 | 1-1/2; 10 | 7/8 | 1-1/2; 10 | 15/16 | 1-1/2; 10 | 1 | 1-1/2; 10 | 1-1/8 | 1-1/2; 10 | 1-1/4 | 1-1/2; 10 | 1-1/2 | 1-1/2; 50mm | 4 | 16; 50 | 5 | 16; 50 | 6 | 16; 50 | 8 | 16; 50 | 10 | 16; 63 | 4 | 22; 63 | 5 | 22; 63 | 6 | 22; 63 | 8 | 22; 63 | 10 | 22; 63 | 12 | 22; 63 | 14 | 22; 63 | 16 | 22; 80 | 5 | 27; 80 | 6 | 27; 80 | 8 | 27; 80 | 10 | 27; 80 | 12 | 27; 80 | 14 | 27; 80 | 16 | 27; 80 | 18 | 27; 80 | 20 | 27; 100 | 6 | 32; 100 | 8 | 32; 100 | 10 | 32; 100 | 12 | 32; 100 | 14 | 32; 100 | 16 | 32; 100 | 18 | 32; 100 | 20 | 32
0307-489 | Dovetail angular cutters
size | Cutter width | Shank Dia. | Oal. | Angel — verify units and ordered drawing: 3/8” | 1/8 | 3/8 | 2-1/8 | 45°; 1/2 | 5/32 | 3/8 | 2-1/8 | 45°; 3/4 | 1/4 | 3/8 | 2-1/8 | 45°; 1-3/8 | 7/16 | 5/8 | 2-7/8 | 45°; 1-7/8 | 9/16 | 7/8 | 3-1/4 | 45°; 2-1/4 | 5/8 | 1 | 3-3/4 | 45°; 13mm | 4 | 12 | 54 | 45°; 16 | 4 | 12 | 60 | 45°; 19 | 5 | 12 | 63 | 45°; 25 | 6.3 | 12 | 67 | 45°; 32 | 8 | 16 | 71 | 45°; 3/8” | 3/16 | 3/8 | 2-1/8 | 60°; 1/2 | 1/4 | 3/8 | 2-1/8 | 60°; 3/4 | 5/16 | 3/8 | 2-1/8 | 60°; 1-3/8 | 9/16 | 5/8 | 2-7/8 | 60°; 1-7/8 | 13/16 | 7/8 | 3-1/4 | 60°; 2-1/4 | 1-1/16 | 1 | 3-3/4 | 60°; 13 | 5.8 | 5.8 | 54 | 60°; 16 | 6.3 | 6.3 | 60 | 60°; 19 | 8 | 8 | 63 | 60°; 25 | 10 | 10 | 67 | 60°; 32 | 12.5 | 12.5 | 71 | 60°
0307-490 | Dovetail angular cutters screwed shank
size | Cutter width | Shank Dia. | Oal. | Angel — verify units and ordered drawing: 1/2” | 1/8 | 1/2 | 2-5/8 | 45°; 5/8 | 5/32 | 1/2 | 2-5/8 | 45°; 3/4 | 7/32 | 1/2 | 2-5/8 | 45°; 7/8 | 1/4 | 1/2 | 2-11/16 | 45°; 1 | 5/16 | 1/2 | 2-3/4 | 45°; 1-1/8 | 11/32 | 5/8 | 2-15/16 | 45°; 1-1/4 | 11/32 | 5/8 | 2-15/16 | 45°; 1-3/8 | 3/8 | 1 | 3-1/16 | 45°; 1-1/2 | 13/32 | 1 | 3-3/32 | 45°; 1 | 15/32 | 1/2 | 2-3/4 | 55; 13mm | 3 | 12 | 63.5 | 45°; 16 | 4 | 12 | 66.5 | 45°; 19 | 5.5 | 12 | 66.5 | 45°; 22 | 6.5 | 12 | 68.5 | 45°; 25 | 7.5 | 12 | 70 | 45°; 28 | 8.5 | 16 | 71.5 | 45°; 32 | 8.5 | 16 | 74.5 | 45°; 35 | 9.5 | 25 | 79.5 | 45°; 38 | 10.5 | 25 | 80 | 45°; 1/2 | 5/32 | 1/2 | 2-1/2 | 60°; 5/8 | 7/32 | 1/2 | 2-5/8 | 60°; 3/4 | 9/32 | 1/2 | 2-21/32 | 60°; 7/8 | 3/8 | 1/2 | 2-21/32 | 60°; 1 | 15/32 | 1/2 | 2-3/4 | 60°; 1-1/8 | 1/2 | 5/8 | 2-7/8 | 60°; 1-1/4 | 17/32 | 5/8 | 2-15/16 | 60°; 1-3/8 | 9/16 | 1 | 3-1/4 | 60°; 1-1/2 | 5/8 | 1 | 3-5/16 | 60°; 1-1/2 | 15/32 | 1/2 | 2-3/4 | 55°; 13 | 4 | 12 | 63.5 | 60°; 16 | 5.5 | 12 | 66.5 | 60°; 19 | 7 | 12 | 66.5 | 60°; 22 | 9.5 | 12 | 68.5 | 60°; 25 | 12 | 12 | 70 | 60°; 28 | 12.5 | 16 | 71.5 | 60°; 32 | 13.5 | 16 | 74.5 | 60°; 35 | 14.5 | 25 | 84 | 60°; 38 | 18 | 25 | 85.5 | 60°
0307-491 | T-slot cutters
Bolt size | cutter Dia. | Cutter width | Neck Dia. | Shank Dia. | Oal. — verify units and ordered drawing: 1/4” | 9/16 | 15/64 | 17/64 | 1/2 | 2-19/32; 5/16 | 21/32 | 17/64 | 21/64 | 1/2 | 2-11/16; 3/8 | 25/32 | 21/64 | 13/32 | 3/4 | 3-1/4; 1/2 | 31/32 | 25/64 | 17/32 | 3/4 | 3-7/16; 5/8 | 1-1/4 | 31/64 | 21/32 | 1 | 3-15/16; 3/4 | 1-15/32 | 5/8 | 25/32 | 1 | 4-7/16; 1 | 1-27/32 | 53/64 | 1-1/32 | 1-1/4 | 4-13/16; 1-1/4 | 2-7/32 | 1-3/32 | 1-9/32 | 1-1/4 | 5-3/8; 1-1/2 | 2-21/32 | 1-11/32 | 1-17/32 | 1-1/4 | 5-29/32; 5 | 11 | 3.5 | 4 | 10 | 53.5; 6 | 12.5 | 6 | 5 | 10 | 57; 8 | 16 | 8 | 7 | 10 | 62; 10 | 18 | 8 | 8 | 12 | 70; 12 | 21 | 9 | 10 | 12 | 74; 14 | 25 | 11 | 12 | 16 | 82; 16 | 29 | 12.5 | 13 | 16 | 85; 18 | 32 | 14 | 15 | 16 | 90; 20 | 36 | 15.5 | 17 | 25 | 101; 22 | 40 | 18 | 19 | 25 | 108; 24 | 45 | 20 | 21 | 25 | 112; 28 | 50 | 22 | 25 | 32 | 124; 32 | 57 | 24 | 28 | 32 | 131; 36 | 60 | 28 | 30 | 32 | 139
0307-492 | Roughing T-slot cutters
Bolt size | cutter Dia. | Cutter width | Neck Dia. | Shank Dia. | Oal. — verify units and ordered drawing: 1/2 | 31/32 | 25/64 | 17/32 | 3/4 | 3-7/16; 5/8 | 1-1/4 | 31/64 | 21/32 | 1 | 3-15/16; 3/4 | 1-15/32 | 5/8 | 25/32 | 1 | 4-7/16; 1 | 1-27/32 | 53/64 | 1-1/32 | 1-1/4 | 4-13/16; 1-1/4 | 2-7/32 | 1-3/32 | 1-9/32 | 1-1/4 | 5-3/8; 1-1/2 | 2-21/32 | 1-11/32 | 1-17/32 | 1-1/4 | 5-29/32
0307-493 | T-slot cutters screwed shank type
Bolt size | cutter Dia. | Cutter width | Neck Dia. | Shank Dia. | Oal. — verify units and ordered drawing: 5mm | 11 | 3.5 | 4 | 10 | 53.5; 6 | 12.5 | 6 | 5 | 10 | 57; 8 | 16 | 8 | 7 | 10 | 62; 10 | 18 | 8 | 8 | 12 | 70; 12 | 21 | 9 | 10 | 12 | 74; 14 | 25 | 11 | 12 | 16 | 82; 16 | 29 | 12.5 | 13 | 16 | 85; 18 | 32 | 14 | 15 | 16 | 90; 20 | 36 | 15.5 | 17 | 25 | 101; 22 | 40 | 18 | 19 | 25 | 108; 24 | 45 | 20 | 21 | 25 | 112; 28 | 50 | 22 | 25 | 32 | 124; 32 | 57 | 24 | 28 | 32 | 131; 36 | 60 | 28 | 30 | 32 | 139; 1/4” | 37/64 | 1/4 | 1/4 | 1/2 | 2-3/8; 5/16 | 45/64 | 5/16 | 9/32 | 1/2 | 2-9/16; 3/8 | 53/64 | 23/64 | 11/32 | 1/2 | 2-11/16; 7/16 | 61/64 | 27/64 | 3/8 | 1/2 | 2-7/8; 1/2 | 1-5/64 | 15/32 | 15/32 | 1/2 | 3; 5/8 | 1-21/64 | 37/64 | 9/16 | 1 | 4; 3/4 | 1-33/64 | 11/16 | 11/16 | 1 | 4-5/16; 7/8 | 1-45/64 | 51/64 | 13/16 | 1 | 4-5/8; 1 | 1-61/64 | 29/32 | 15/16 | 1 | 5
0307-494 | Long shank T-slot cutters
cutter Dia. | Cutter width | Neck Dia. | Shank Dia. | Oal. — verify units and ordered drawing: 1 | 1/8 | 7/16 | 5/8 | 4-15/16; 1 | 3/16 | 7/16 | 5/8 | 4-15/16; 1 | 1/4 | 7/16 | 5/8 | 4-15/16; 1 | 5/16 | 7/16 | 5/8 | 4-15/16; 1 | 3/8 | 7/16 | 5/8 | 4-15/16; 1 | 1/2 | 7/16 | 5/8 | 4-15/16; 1 | 5/8 | 7/16 | 5/8 | 4-15/16; 1-1/4 | 1/8 | 19/32 | 3/4 | 5-1/8; 1-1/4 | 3/16 | 19/32 | 3/4 | 5-1/8; 1-1/4 | 1/4 | 19/32 | 3/4 | 5-1/8; 1-1/4 | 5/16 | 19/32 | 3/4 | 5-1/8; 1-1/4 | 3/8 | 19/32 | 3/4 | 5-1/8; 1-1/4 | 1/2 | 19/32 | 3/4 | 5-1/8; 1-1/4 | 5/8 | 19/32 | 3/4 | 5-1/8; 1-1/2 | 1/8 | 23/32 | 1 | 5-5/16; 1-1/2 | 3/16 | 23/32 | 1 | 5-5/16; 1-1/2 | 1/4 | 23/32 | 1 | 5-5/16; 1-1/2 | 5/16 | 23/32 | 1 | 5-5/16; 1-1/2 | 3/8 | 23/32 | 1 | 5-5/16; 1-1/2 | 1/2 | 23/32 | 1 | 5-5/16; 1-1/2 | 5/8 | 23/32 | 1 | 5-5/16; 2 | 3/16 | 25/32 | 1 | 5-11/16; 2 | 1/4 | 25/32 | 1 | 5-11/16; 2 | 5/16 | 25/32 | 1 | 5-11/16; 2 | 3/8 | 25/32 | 1 | 5-11/16; 2 | 1/2 | 25/32 | 1 | 5-11/16; 2 | 5/8 | 25/32 | 1 | 5-11/16; 2 | 3/4 | 25/32 | 1 | 5-11/16; 2-1/2 | 1/4 | 29/32 | 1 | 6-5/8; 2-1/2 | 5/16 | 29/32 | 1 | 6-5/8; 2-1/2 | 3/8 | 29/32 | 1 | 6-5/8; 2-1/2 | 1/2 | 29/32 | 1 | 6-5/8; 2-1/2 | 5/8 | 29/32 | 1 | 6-5/8; 2-1/2 | 3/4 | 29/32 | 1 | 6-5/8; 2-1/2 | 7/8 | 29/32 | 1 | 6-5/8; 2-1/2 | 1 | 29/32 | 1 | 6-5/8
0307-495 | HSS tapered end mill
Material / construction: M2
0307-496 | HSS-G conical mills
Size | Shk.Dia — verify units and ordered drawing: 25x40 | 8; 32x50 | 10; 45x60 | 10
0307-497 | Rotary burrs type N - Opposite Taper
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing: 6 | 7 | 52 | 6; 8 | 7 | 52 | 6; 10 | 10 | 53 | 6; 12 | 13 | 58 | 6; 16 | 16 | 61 | 6
0307-498 | Turbo Cup Wheel-Alulinum Back
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing: 100 | 4” | 5/8-11” | · | ·; 115 | 4.5” | 5/8-11” | · | ·; 125 | 5” | 5/8-11” | · | ·; 180 | 7” | 5/8-11” | · | —
0307-499 | Vaccum brazed carbide cup wheel
size — verify units and ordered drawing: 100x16; 115x22.2; 125x22.2
0307-500 | Pilot drill for carbide grit hole saw
size — verify units and ordered drawing: 8.0x141; 9.0x220
0307-501 | Carbide grit hole saw
Metric — verify units and ordered drawing: 19mm; 21; 22; 24; 25; 27; 29; 30; 32; 33; 35; 37; 38; 40; 41; 43; 44; 46; 48; 51; 52; 54; 57; 59; 60; 64; 65; 67; 70; 73; 76; 79; 83; 86; 89; 92; 95; 98; 102; 105; 108; 111; 114; 121; 127; 133; 140; 146; 152
0307-502 | Masonry drill with hex shank
Dia x L1 Oal — dimensional units and current drawing to confirm: 3×70mm; 4×75; 5×85; 5.5×85; 6.5×100; 7×100; 8×120; 9×120; 10×120; 11×150; 12×150
0307-503 | SDS plus shank hollow core drill
Dia. | L1 Oal — verify units and ordered drawing: 25.0 | 72; 30.0 | 72; 32.0 | 72; 35.0 | 72; 40.0 | 72; 45.0 | 72; 50.0 | 72; 55.0 | 72; 60.0 | 72; 65.0 | 72; 68.0 | 72; 70.0 | 72; 75.0 | 72; 80.0 | 72; 85.0 | 72; 90.0 | 72; 95.0 | 72; 100.0 | 72; 105.0 | 72; 110.0 | 72; 120.0 | 72
0307-504 | Arbor for hollow core drill
Oal | Thread — verify units and ordered drawing: 110 | M16/M22; 125 | M16/M22; 140 | M16/M22; 160 | M16/M22; 200 | M16/M22; 220 | M16/M22; 250 | M16/M22; 280 | M16/M22; 300 | M16/M22; 350 | M16/M22; 400 | M16/M22; 430 | M16/M22; 450 | M16/M22; 500 | M16/M22; 530 | M16/M22; 600 | M16/M22; 700 | M16/M22; 800 | M16/M22; 1000 | M16/M22
0307-505 | Vacuum brazed diamond thread hole saw
size | size — verify units and ordered drawing: 3.0mm | 8.0; 4.0 | 9.0; 5.0 | 10.0; 6.0 | 12.0; 7.0 | 13.0
0307-506 | Adjustable ceramic tile keyhole saw
size — verify units and ordered drawing: 24-96mm
0307-507 | Mortar rake
Size — verify units and ordered drawing: 8x40; 10x40; 12x40; 8x100; 10x100; 12x100; 8x140; 10x140; 12x140
0307-508 | Right/left brad-point dowel drills
Diameter range: 5–15 mm; Shank: 10 mm; Rotation: Right or left
0307-509 | Five-tip carbide CNC boring drills
Diameter range: 5–40 mm; Shank: 10 mm; Rotation: Right or left
0307-510 | Right/left CNC blind-boring drills
Diameter range: 3–15 mm; Shank: 10 mm; Rotation: Right or left
0307-511 | Short screw-point wood-auger set
Pack / sizes: 5 pieces: 6, 8, 9, 10, 12 mm; Length: 100 mm; Shank: Quick-change hex
0307-512 | Wood splitting threaded drill bits
Dia. | Oal. | Head length | Spiral length — verify units and ordered drawing: 32 | 137 | 88 | 60; 42 | 155 | 105 | 80
0307-513 | Countersink with single flute
Dia | Oal. — verify units and ordered drawing: 12 | 43; 16 | 45
0307-514 | TCT boring bits with long shank
Dia | quick change shank | Oal. — verify units and ordered drawing: 16 | 6.35 | 125; 18 | 6.35 | 125; 19 | 6.35 | 125; 20 | 6.35 | 125; 22 | 6.35 | 125; 25 | 6.35 | 125; 30 | 6.35 | 125; 32 | 6.35 | 125; 35 | 6.35 | 125; Dia | Hex shank | Oal. — verify units and ordered drawing: 1-1/4" | 3/8" | 152.5; 1-3/8" | 3/8" | 152.5; 1-1/2" | 3/8" | 152.5; 1-5/8" | 3/8" | 152.5; 1-3/4" | 3/8" | 152.5; 1-7/8" | 1/2" | 152.5; 2" | 1/2" | 152.5; 2-1/8" | 1/2" | 152.5; 2-1/4" | 1/2" | 152.5
0307-515 | HSS-G&E 3 flute TiN coated tapered drill
Size — verify units and ordered drawing: 2.0x12.0x100x60; 3.0x12.0x100x60; 4.0x12.0x100x60; 2.0x12.0x100x80; 3.0x12.0x100x80; 4.0x12.0x100x80
0307-516 | Brad point wood drill with 2 guide channels
Dia. | Oal. — verify units and ordered drawing: 3 | 61; 4 | 75; 5 | 86; 6 | 94; 7 | 109; 8 | 117; 10 | 133; 12 | 151; 14 | 151; 15 | 160; 16 | 160; 18 | 180; 20 | 200
0307-517 | DIN338 HSS-G wood drill Industrial grade
Dia. | Oal. — verify units and ordered drawing: 3 | 90; 4 | 100; 5 | 112; 6 | 116; 7 | 120; 8 | 130; 9 | 140; 10 | 140; 11 | 150; 12 | 155; 13 | 160
0307-518 | TCT - Cylinder boring bits (Carbide tipped)
Dia. | L1 Oal | shank Dia — verify units and ordered drawing: 15 | 80 | 7; 16 | 80 | 7; 17 | 80 | 7; 18 | 80 | 7; 19 | 80 | 7; 20 | 80 | 8; 21 | 80 | 8; 22 | 80 | 8; 23 | 80 | 8; 24 | 80 | 8; 25 | 85 | 8; 26 | 85 | 8; 27 | 85 | 8; 28 | 85 | 8; 29 | 85 | 8; 30 | 85 | 8; 32 | 85 | 8; 33 | 85 | 8; 34 | 85 | 8; 35 | 85 | 8; 36 | 85 | 8; 38 | 85 | 10; 40 | 90 | 10; 41 | 90 | 10; 42 | 90 | 10; 45 | 90 | 10; 48 | 90 | 10; 50 | 90 | 10; 53 | 90 | 10; 55 | 90 | 10; 60 | 90 | 10; 63 | 90 | 10; 65 | 90 | 10; 70 | 90 | 10; 75 | 90 | 10; 80 | 90 | 10; 85 | 90 | 10; 90 | 105 | 12; 95 | 105 | 12; 100 | 105 | 12
0307-519 | Self-feed wood bits
Dia.mm — verify units and ordered drawing: 25; 28; 32; 35; 38; 45; 51; 54; 57; 65; 76; 92; 117
0307-520 | Brad point wood drill quick change shank
Dia. | L1 Oal — verify units and ordered drawing: 3 | 60; 4 | 75; 5 | 85; 6 | 90; 7 | 100; 8 | 112; 9 | 116; 10 | 120
0307-521 | Circular saw blade for wood working
Out Dia. | teeth wide | Plate thick | No. of teeth — verify units and ordered drawing: 100 | 2 | 1.2 | 18; 100 | 2.4 | 1.6 | 24; 100 | 2.4 | 1.6 | 30; 100 | 2.4 | 1.6 | 40; 125 | 2.4 | 1.6 | 18; 125 | 2.4 | 1.6 | 30; 125 | 2.4 | 1.6 | 32; 125 | 2.4 | 1.6 | 40; 130 | 2.2 | 1.6 | 14; 130 | 2.2 | 1.6 | 24; 130 | 2.2 | 1.6 | 30; 140 | 2.2 | 1.6 | 16; 140 | 2.2 | 1.6 | 24; 140 | 2.2 | 1.6 | 30; 150 | 2.4 | 1.6 | 22; 150 | 2.4 | 1.6 | 30; 150 | 2.4 | 1.6 | 40; 150 | 2.4 | 1.6 | 48; 160 | 2.2 | 1.6 | 16; 160 | 2.2 | 1.6 | 24; 160 | 2.2 | 1.6 | 36; 160 | 2.2 | 1.6 | 50; 165 | 2.2 | 1.6 | 18; 165 | 2.2 | 1.6 | 30; 165 | 2.2 | 1.6 | 48; 170 | 2.2 | 1.6 | 24; 180 | 2.4 | 1.6 | 18; 180 | 2.2 | 1.8 | 30; 180 | 2.4 | 1.8 | 30; 180 | 2.6 | 1.8 | 42; 180 | 2.6 | 1.8 | 52; 184 | 2.6 | 1.8 | 24; 184 | 2.6 | 1.8 | 30; 184 | 2.6 | 1.8 | 50; 190 | 2.6 | 1.8 | 20; 190 | 2.6 | 1.8 | 30; 190 | 2.6 | 1.8 | 40; 190 | 2.6 | 1.8 | 60; 200 | 2.6 | 1.8 | 24; 200 | 2.6 | 1.8 | 40; 200 | 2.6 | 1.8 | 60; 203 | 2.6 | 1.8 | 24; 203 | 2.6 | 1.8 | 32; 203 | 2.6 | 1.8 | 36; 203 | 2.6 | 1.8 | 42; 203 | 2.6 | 1.8 | 48; 203 | 2.6 | 1.8 | 60; 210 | 2.6 | 1.8 | 24; 210 | 2.6 | 1.8 | 40; 210 | 2.6 | 1.8 | 60; 210 | 2.6 | 1.8 | 100; 230 | 2.6 | 1.8 | 20; 230 | 2.6 | 1.8 | 38; 230 | 2.6 | 1.8 | 40; 230 | 2.6 | 1.8 | 52; 230 | 2.6 | 1.8 | 60; 255 | 2.6 | 1.8 | 36; 255 | 2.6 | 1.8 | 40; 255 | 2.8 | 2 | 50; 255 | 2.8 | 2 | 60; 235 | 2.6 | 1.8 | 20; 235 | 2.6 | 1.8 | 40; 235 | 2.6 | 1.8 | 60; 250 | 2.6 | 1.8 | 24; 250 | 2.6 | 1.8 | 40; 250 | 2.6 | 1.8 | 60; 250 | 2.6 | 1.8 | 80; 300 | 2.6 | 1.8 | 24; 300 | 2.6 | 1.8 | 40; 300 | 2.6 | 1.8 | 60; 300 | 2.6 | 1.8 | 80; 305 | 2.8 | 2 | 48; 305 | 2.8 | 2 | 52; 305 | 2.8 | 2 | 60; 305 | 2.8 | 2 | 68; 300 | 2.8 | 2 | 24; 300 | 2.8 | 2 | 40; 300 | 2.8 | 2 | 48; 300 | 2.8 | 2 | 60; 300 | 2.8 | 2 | 80; 315 | 2.8 | 2 | 24; 315 | 2.8 | 2 | 40; 315 | 2.8 | 2 | 60; 315 | 2.8 | 2 | 80; 350 | 2.8 | 2 | 28; 350 | 2.8 | 2 | 40; 350 | 2.8 | 2 | 54; 350 | 2.8 | 2 | 72; 350 | 2.8 | 2 | 84; 355 | 2.8 | 2 | 46; 355 | 2.8 | 2 | 64; 355 | 2.8 | 2 | 72; 355 | 2.8 | 2 | 80; 400 | 2.8 | 2 | 32; 400 | 2.8 | 2 | 40; 400 | 2.8 | 2 | 48; 400 | 2.8 | 2 | 60; 400 | 2.8 | 2 | 72; 400 | 2.8 | 2 | 84; 405 | 3.2 | 2.2 | 60; 405 | 3.2 | 2.2 | 80; 405 | 3.2 | 2.2 | 100; 405 | 3.2 | 2.2 | 120; 4 | 2 | 1.2 | 18; 4 | 2.4 | 1.6 | 24; 4 | 2.4 | 1.6 | 30; 4 | 2.2 | 1.6 | 40; 4 | 2.4 | 1.6 | 40; 5 | 2.4 | 1.6 | 18; 5 | 2.4 | 1.6 | 30; 5 | 2.4 | 1.6 | 32; 5 | 2.4 | 1.6 | 40; 6 | 2.4 | 1.6 | 22; 6 | 2.4 | 1.6 | 30; 6 | 2.4 | 1.6 | 40; 6 | 2.4 | 1.6 | 48; 7 | 2.4 | 1.6 | 18; 7 | 2.4 | 1.6 | 30; 7 | 2.6 | 1.8 | 42; 7 | 2.6 | 1.8 | 52; 7-1/4 | 2.6 | 1.8 | 60; 7-1/4 | 2.8 | 2.0 | 60; 7-1/4 | 2.6 | 1.8 | 24; 7-1/4 | 2.8 | 2.0 | 36; 8 | 2.6 | 1.8 | 32; 8 | 2.6 | 1.8 | 42; 8 | 2.6 | 1.8 | 48; 8 | 2.6 | 1.8 | 60; 8-1/4 | 3.2 | 2.2 | 60; 8-1/4 | 3.2 | 2.2 | 80; 9 | 2.6 | 1.8 | 38; 9 | 2.6 | 1.8 | 52; 9 | 2.6 | 1.8 | 60; 9 | 3 | 2.2 | 80; 9 | 3.2 | 2.2 | 80; 9 | 3 | 2.2 | 100; 10 | 2.6 | 1.8 | 36; 10 | 2.6 | 1.8 | 40; 10 | 2.8 | 2.0 | 50; 10 | 2.8 | 2.0 | 60; 10 | 3 | 2.2 | 60; 10 | 3 | 2.2 | 80; 10 | 3.2 | 2.2 | 80; 10 | 3 | 2.2 | 100; 10 | 3.2 | 2.2 | 100; 10 | 3 | 2.2 | 120; 12 | 2.8 | 2.0 | 45; 12 | 2.8 | 2.0 | 52; 12 | 2.8 | 2.0 | 60; 12 | 2.8 | 2.0 | 68; 12 | 3 | 2.2 | 80; 12 | 3 | 2.2 | 100; 12 | 3.2 | 2.2 | 100; 12 | 3 | 2.2 | 120; 12 | 3.2 | 2.2 | 120; 14 | 2.8 | 2.0 | 46; 14 | 3 | 2.2 | 60; 14 | 2.8 | 2.0 | 64; 14 | 2.8 | 2.0 | 72; 14 | 3 | 2.2 | 80; 14 | 3.2 | 2.2 | 80; 14 | 3 | 2.2 | 100; 14 | 3.2 | 2.2 | 100; 14 | 3 | 2.2 | 120; 14 | 3.2 | 2.2 | 120; 16 | 3.2 | 2.2 | 60; 16 | 3.2 | 2.2 | 80; 16 | 3.2 | 2.2 | 100; 16 | 3.2 | 2.2 | 120
0307-522 | HCS brad point wood drill bits
Dia. | L1 Oal — verify units and ordered drawing: 3 | 60; 4 | 75; 5 | 85; 6 | 91; 7 | 100; 8 | 112; 9 | 116; 10 | 120; 11 | 130; 12 | 140; 13 | 140; 14 | 150; 15 | 155; 16 | 160; 18 | 180; 19 | 190; 20 | 200; 21 | 210; 22 | 220; 23 | 225; 24 | 230; 25 | 235; 26 | 240; 28 | 250; 6 | 200; 8 | 200; 10 | 200; 12 | 200; 6 | 250; 8 | 250; 10 | 250; 4 | 300; 5 | 300; 6 | 300; 7 | 300; 8 | 300; 9 | 300; 10 | 300; 12 | 300; 13 | 300; 14 | 300; 6 | 400; 8 | 400; 10 | 400; 12 | 400; Dia. | L1 Oal — verify units and ordered drawing (alternative schedule 2): 1/8 | 2-3/8; 5/32 | 2-15/16; 3/16 | 3-11/32; 1/4 | 3-9/16; 9/32 | 3-15/16; 5/16 | 4-3/8; 11/32 | 4-9/16; 3/8 | 4-3/4; 7/16 | 5-1/8; 15/32 | 5-1/2; 1/2 | 5-1/2; 9/16 | 5-15/16; 19/32 | 6-3/32; 5/8 | 6-5/16; 11/16 | 7-3/32; 3/4 | 7-15/32; 13/16 | 7-7/8; 53/64 | 8-9/32; 7/8 | 8-5/8; 15/16 | 8-7/8; 1 | 9-1/4; 1-1/32 | 9-1/2; 1-1/8 | 9-7/8; 1-1/4 | 9-7/8
0307-523 | Brad point wood drill made of C.V.
Dia. | L1 Oal — verify units and ordered drawing: 1/8 | 2-3/8; 5/32 | 2-15/16; 3/16 | 3-11/32; 1/4 | 3-9/16; 9/32 | 3-15/16; 5/16 | 4-3/8; 11/32 | 4-9/16; 3/8 | 4-3/4; 7/16 | 5-1/8; 15/32 | 5-1/2; 1/2 | 5-1/2; 9/16 | 5-15/16; 19/32 | 6-3/32; 5/8 | 6-5/16; 11/16 | 7-3/32; 3/4 | 7-15/32; 13/16 | 7-7/8; 53/64 | 8-9/32; 7/8 | 8-5/8; 15/16 | 8-7/8; 1 | 9-1/4; 1-1/32 | 9-1/2; 1-1/8 | 9-7/8; 1-1/4 | 9-7/8
0307-524 | HSS brad point wood drill bits
Dia. | L1 Oal — verify units and ordered drawing: 3.0 | 60; 4.0 | 75; 5.0 | 85; 6.0 | 91; 7.0 | 100; 8.0 | 112; 9.0 | 116; 10.0 | 120; 11.0 | 130; 12.0 | 140; 13.0 | 140; 1/8 | 2-3/8; 5/32 | 2-15/16; 3/16 | 3-11/32; 1/4 | 3-9/16; 9/32 | 3-15/16; 5/16 | 4-3/8; 11/32 | 4-9/16; 3/8 | 4-3/4; 1/2 | 5-1/8; 15/32 | 5-1/2; 1/2 | 5-1/2
0307-525 | Bell hangers drill (wood drill with A lead hole on the flute)
Dia. | L1 Oal — verify units and ordered drawing: 6.0 | 400; 8.0 | 400; 10.0 | 400; 12.0 | 400; 6.0 | 450; 8.0 | 450; 10.0 | 450; 12.0 | 450; 6.0 | 600; 8.0 | 600; 10.0 | 600; 12.0 | 600; 1/4 | 16”; 5/16 | 16”; 3/8 | 16”; 1/2 | 16”; 1/4 | 18”; 5/16 | 18”; 3/8 | 18”; 1/2 | 18”; 1/4 | 24”; 5/16 | 24”; 3/8 | 24”; 1/2 | 24”
0307-526 | Adjustable wood drill bit
Dia. — verify units and ordered drawing: From 15-25mm 1pc; From 15-25/25-45mm 2pc; From 25-45/45-75mm 2pc
0307-527 | Adjustable circle hole cutter
Dia. — verify units and ordered drawing: 30-120mm; 30-130mm; 30-200mm; 40-120mm; 40-150mm; 40-200mm; 40-300mm
0307-528 | Crown head saw drill with five cutter
Dia. | L1 Oal — verify units and ordered drawing: 3.0 | 60; 4.0 | 75; 5.0 | 85; 6.0 | 91; 7.0 | 100; 8.0 | 112; 9.0 | 116; 10.0 | 120; 11.0 | 130; 12.0 | 140; 13.0 | 140; 14.0 | 150; 15.0 | 155; 16.0 | 160; 18.0 | 180; 19.0 | 190; 20.0 | 200
0307-529 | Mortise bits
Construction / finish choices: 40Cr; 60#; confirm availability for each size; Dia. | mm | L1 Oal | L2 Flute — verify units and ordered drawing: 1/4” | 6.35 | 220 | 138; 5/16 | 8 | 220 | 138; 3/8 | 9.5 | 220 | 138; 7/16 | 11 | 220 | 138; 1/2 | 12.7 | 220 | 138; 9/16 | 14 | 220 | 138; 5/8 | 16 | 220 | 138; 11/16 | 17.5 | 220 | 138; 3/4 | 19 | 220 | 138; 7/8 | 22.2 | 220 | 138; 1 | 25.4 | 220 | 138
0307-530 | Form work drill with SDS shank
Dia. | L1 Oal — verify units and ordered drawing: 8.0 | 400; 8.0 | 600; 10.0 | 400; 10.0 | 600; 12.0 | 400; 12.0 | 600; 14.0 | 400; 14.0 | 600; 16.0 | 400; 16.0 | 600; 18.0 | 400; 18.0 | 600; 20.0 | 400; 20.0 | 600; 22.0 | 400; 22.0 | 600; 24.0 | 400; 24.0 | 600; 26.0 | 400; 26.0 | 600; 28.0 | 400; 28.0 | 600; 30.0 | 400; 30.0 | 600
0307-531 | Form work drill
Dia. | L1 Oal — verify units and ordered drawing: 6.0 | 400; 6.0 | 600; 6.0 | 800; 6.0 | 1000; 8.0 | 400; 8.0 | 600; 8.0 | 800; 8.0 | 1000; 10.0 | 400; 10.0 | 600; 10.0 | 800; 10.0 | 1000; 12.0 | 400; 12.0 | 600; 12.0 | 800; 12.0 | 1000; 13.0 | 400; 13.0 | 600; 13.0 | 800; 13.0 | 1000; 14.0 | 400; 14.0 | 600; 14.0 | 800; 14.0 | 1000; 16.0 | 400; 16.0 | 600; 16.0 | 800; 16.0 | 1000; 18.0 | 400; 18.0 | 600; 18.0 | 1000; 20.0 | 400; 20.0 | 600; 20.0 | 800; 20.0 | 1000; 22.0 | 400; 22.0 | 600; 22.0 | 800; 22.0 | 1000; 24.0 | 400; 24.0 | 600; 24.0 | 800; 24.0 | 1000; 26.0 | 400; 26.0 | 600; 26.0 | 800; 26.0 | 1000; 28.0 | 400; 28.0 | 600; 28.0 | 800; 28.0 | 1000; 30.0 | 400; 30.0 | 600; 30.0 | 800; 30.0 | 1000
0307-532 | DIN1052 Auger bits (Lewis wood beam drill)
Construction / finish choices: TiN coated; SDS shank TiN coated; Quick change shank; Quick change shank TiN coated; confirm availability for each size; Unlabelled dimension | Unlabelled dimension — verify units and ordered drawing: 6.0 | 105; 8.0 | 105; 10.0 | 105; 11.0 | 105; 12.0 | 105; 13.0 | 105; 14.0 | 105; 15.0 | 105; 16.0 | 105; 17.0 | 105; 18.0 | 105; 19.0 | 105; 20.0 | 105; 21.0 | 105; 22.0 | 105; 23.0 | 105; 24.0 | 105; 25.0 | 105; 26.0 | 105; 28.0 | 105; 30.0 | 105; 32.0 | 105; 34.0 | 105; 35.0 | 105; 36.0 | 105; 38.0 | 105; 40.0 | 105; 6.0 | 230; 8.0 | 230; 10.0 | 230; 11.0 | 230; 12.0 | 230; 13.0 | 230; 14.0 | 230; 15.0 | 230; 16.0 | 230; 17.0 | 230; 18.0 | 230; 19.0 | 230; 20.0 | 230; 21.0 | 230; 22.0 | 230; 23.0 | 230; 24.0 | 230; 25.0 | 230; 26.0 | 230; 28.0 | 230; 30.0 | 230; 32.0 | 230; 34.0 | 230; 35.0 | 230; 36.0 | 230; 38.0 | 230; 40.0 | 230; 6.0 | 460; 8.0 | 460; 10.0 | 460; 11.0 | 460; 12.0 | 460; 13.0 | 460; 14.0 | 460; 15.0 | 460; 16.0 | 460; 17.0 | 460; 18.0 | 460; 19.0 | 460; 20.0 | 460; 21.0 | 460; 22.0 | 460; 23.0 | 460; 24.0 | 460; 25.0 | 460; 26.0 | 460; 28.0 | 460; 30.0 | 460; 32.0 | 460; 34.0 | 460; 35.0 | 460; 36.0 | 460; 38.0 | 460; 40.0 | 460
0307-533 | Hollow center flute auger bits German type with hex shank
Dia. | L1 Oal — verify units and ordered drawing: 6.0 | 200; 7.0 | 200; 8.0 | 200; 10.0 | 200; 12.0 | 200; 14.0 | 200; 16.0 | 200; 18.0 | 200; 20.0 | 200; 22.0 | 200; 24.0 | 200; 26.0 | 200
0307-534 | Solid center flute auger bits German type with SDS shank
Dia. | L1 Oal — verify units and ordered drawing: 6.0 | 230; 7.0 | 230; 8.0 | 230; 10.0 | 230; 12.0 | 230; 14.0 | 230; 16.0 | 230; 18.0 | 230; 20.0 | 230; 22.0 | 230; 24.0 | 230; 26.0 | 230; 6.0 | 460; 7.0 | 460; 8.0 | 460; 10.0 | 460; 12.0 | 460; 14.0 | 460; 16.0 | 460; 18.0 | 460; 20.0 | 460; 22.0 | 460; 24.0 | 460; 26.0 | 460
0307-535 | Double twist auger bits
Dia. | L1 Oal — verify units and ordered drawing: 6.0 | 200; 8.0 | 200; 10.0 | 200; 11.0 | 200; 12.0 | 200; 13.0 | 200; 14.0 | 200; 15.0 | 200; 16.0 | 200; 17.0 | 200; 18.0 | 200; 19.0 | 200; 20.0 | 200; 21.0 | 200; 22.0 | 200; 23.0 | 200; 24.0 | 200; 25.0 | 200; 26.0 | 200; 28.0 | 200; 30.0 | 200; 32.0 | 200
0307-536 | Quick change shank auger bits
Dia. | L1 Oal — dimensional units and current drawing to confirm: 3.0 | 90; 3.0 | 120; 4.0 | 90; 4.0 | 120; 5.0 | 90; 5.0 | 120; 6.0 | 90; 8.0 | 90
0307-537 | Screw auger bits long shank
Dia. | L1 Oal | L2 Flute — verify units and ordered drawing: 13.0 | 520 | 240; 16.0 | 560 | 270; 19.0 | 590 | 300; 22.0 | 590 | 300; 25.0 | 600 | 310
0307-538 | Spade drill
Construction / finish choices: TiN coated; SDS shank TiN coated; Quick change shank; Quick change shank TiN coated; confirm availability for each size; Unlabelled dimension | Unlabelled dimension — verify units and ordered drawing: 6.0 | 150; 8.0 | 150; 10.0 | 150; 11.0 | 150; 12.0 | 150; 13.0 | 150; 14.0 | 150; 15.0 | 150; 16.0 | 150; 17.0 | 150; 18.0 | 150; 19.0 | 150; 20.0 | 150; 22.0 | 150; 24.0 | 150; 25.0 | 150; 26.0 | 150; 28.0 | 150; 30.0 | 150; 32.0 | 150; 35.0 | 150; 38.0 | 150; 40.0 | 150; Dia. | L1 Oal; Unlabelled dimension | Unlabelled dimension — verify units and ordered drawing (alternative schedule 2): 1/4 | 6”; 5/16 | 6; 3/8 | 6; 7/16 | 6; 15/32 | 6; 1/2 | 6; 9/16 | 6; 19/32 | 6; 5/8 | 6; 21/32 | 6; 11/16 | 6; 3/4 | 6; 25/32 | 6; 7/8 | 6; 15/16 | 6; 1 | 6; 1-1/32 | 6; 1-7/64 | 6; 1-3/16 | 6; 1-17/64 | 6; 1-3/8 | 6; 1-1/2 | 6; 1-9/16 | 6
0307-539 | Handy tapered reamer
size | size — verify units and ordered drawing: 12 | 15/32”; 13 | 1/2; 16 | 5/8; 19 | 3/4; 22 | 7/8
0307-540 | Forstner bits (As per DIN7483-G)
Dia. | shank | L1 Oal. — verify units and ordered drawing: 6.0 | 6x30 | 90; 8.0 | 6x30 | 90; 10.0 | 8x30 | 90; 11.0 | 8x30 | 90; 12.0 | 8x30 | 90; 14.0 | 8x30 | 90; 15.0 | 8x30 | 90; 16.0 | 8x30 | 90; 18.0 | 8x30 | 90; 20.0 | 8x30 | 90; 21.0 | 8x30 | 90; 22.0 | 8x30 | 90; 24.0 | 8x30 | 90; 25.0 | 8x30 | 90; 26.0 | 8x30 | 90; 28.0 | 8x30 | 90; 30.0 | 8x30 | 90; 32.0 | 10x30 | 90; 34.0 | 10x30 | 90; 35.0 | 10x30 | 90; 36.0 | 10x30 | 90; 38.0 | 10x30 | 90; 40.0 | 10x30 | 90; 42.0 | 10x30 | 90; 44.0 | 10x30 | 90; 45.0 | 10x30 | 90; 50.0 | 10x30 | 90; 55.0 | 10x30 | 90; Dia. | shank | Unassigned D×L2 reference — verify units and ordered drawing: 1/4 | 3/8 | 3-5/32; 3/8 | 3/8 | 3-5/32; 1/2 | 3/8 | 3-5/32; 5/8 | 3/8 | 3-5/32; 3/4 | 3/8 | 3-5/32; 7/8 | 3/8 | 3-5/32; 1 | 3/8 | 3-5/32; 1-1/8 | 3/8 | 3-5/32; 1-1/4 | 3/8 | 3-5/32; 1-3/8 | 3/8 | 3-5/32; 1-1/2 | 3/8 | 3-5/32; 1-5/8 | 3/8 | 3-5/32; 1-3/4 | 3/8 | 3-5/32; 1-7/8 | 3/8 | 3-5/32; 2 | 3/8 | 3-5/32; 2-1/8 | 3/8 | 3-5/32; 2-1/4 | 1/2 | 6-1/4; 2-5/16 | 1/2 | 6-1/4; 2-3/8 | 1/2 | 6-1/4; 2-1/2 | 1/2 | 6-1/4; 2-5/8 | 1/2 | 6-1/4; 2-3/4 | 1/2 | 6-1/4; 2-7/8 | 1/2 | 6-1/4; 3 | 1/2 | 6-1/4; 3-1/8 | 1/2 | 6-1/4; 3-1/4 | 1/2 | 6-1/4; 3-3/8 | 1/2 | 6-1/4; 3-1/2 | 1/2 | 6-1/4; 3-5/8 | 1/2 | 6-1/4; 3-3/4 | 1/2 | 6-1/4; 3-7/8 | 1/2 | 6-1/4; 4 | 1/2 | 6-1/4; 4-1/8 | 1/2 | 6-1/4; 4-1/4 | 1/2 | 6-1/4; 4-1/2 | 1/2 | 6-1/4
0307-541 | Cylinder boring bits similar DIN7483-G
Dia. | shank | L1 Oal. — verify units and ordered drawing: 8 | 8x30 | 90; 10 | 8x30 | 90; 12 | 8x30 | 90; 14 | 8x30 | 90; 15 | 8x30 | 90; 16 | 8x30 | 90; 18 | 8x30 | 90; 20 | 8x30 | 90; 22 | 8x30 | 90; 24 | 8x30 | 90; 25 | 8x30 | 90; 26 | 8x30 | 90; 28 | 8x30 | 90; 30 | 8x30 | 90; 32 | 10x30 | 90; 34 | 10x30 | 90; 35 | 10x30 | 90; 36 | 10x30 | 90; 38 | 10x30 | 90; 40 | 10x30 | 90; 42 | 10x30 | 90; 45 | 10x30 | 90; 48 | 10x30 | 90; 50 | 10x30 | 90
0307-542 | Hinge boring bits
Dia — verify units and ordered drawing: 26; 30; 35
0307-543 | Hex shank forstner bits
Dia. | shank | L1 Oal. — verify units and ordered drawing: 6.0 | 6x30 | 90; 8.0 | 6x30 | 90; 10.0 | 8x30 | 90; 11.0 | 8x30 | 90; 12.0 | 8x30 | 90; 14.0 | 8x30 | 90; 15.0 | 8x30 | 90; 16.0 | 8x30 | 90; 18.0 | 8x30 | 90; 20.0 | 8x30 | 90; 21.0 | 8x30 | 90; 22.0 | 8x30 | 90; 24.0 | 8x30 | 90; 25.0 | 8x30 | 90; Dia. | shank | Unassigned D×L2 reference — verify units and ordered drawing: 1/4” | 3/8” | 3-5/32”; 3/8 | 3/8 | 3-5/32”; 1/2 | 3/8 | 3-5/32”; 5/8 | 3/8 | 3-5/32”; 3/4 | 3/8 | 3-5/32”; 7/8 | 3/8 | 3-5/32”; 1 | 3/8 | 3-5/32”
0307-544 | Precision forstner bits
Dia. | shank | L1 Oal. — verify units and ordered drawing: 6.0 | 6x30 | 90; 8.0 | 6x30 | 90; 10.0 | 8x30 | 90; 11.0 | 8x30 | 90; 12.0 | 8x30 | 90; 14.0 | 8x30 | 90; 15.0 | 8x30 | 90; 16.0 | 8x30 | 90; 18.0 | 8x30 | 90; 20.0 | 8x30 | 90; 21.0 | 8x30 | 90; 22.0 | 8x30 | 90; 24.0 | 8x30 | 90; 25.0 | 8x30 | 90; 26.0 | 8x30 | 90; 28.0 | 8x30 | 90; 30.0 | 8x30 | 90; 32.0 | 10x30 | 90; 34.0 | 10x30 | 90; 35.0 | 10x30 | 90; 36.0 | 10x30 | 90; 38.0 | 10x30 | 90; 40.0 | 10x30 | 90; 42.0 | 10x30 | 90; 44.0 | 10x30 | 90; 45.0 | 10x30 | 90; 50.0 | 10x30 | 90; 55.0 | 10x30 | 90
0307-545 | Long forstner bits with tooth
Metric — verify units and ordered drawing: 10x9.5x150; 12x9.5x150; 15x9.5x150; 16x9.5x150; 20x9.5x150; 22x9.5x150; 25x9.5x150; 27x9.5x150; 30x9.5x150; 35x9.5x150; 40x9.5x150; 43x9.5x150; 45x9.5x150; 50x9.5x150; 60x13.0x160; 80x13.0x160; 83x13.0x160
0307-546 | Shell drill countersinks
Dia. | For drill — dimensional units and current drawing to confirm: 12.0 | 3.0; 12.0 | 4.0; 12.0 | 5.0; 12.0 | 6.0; 16.0 | 6.0; 16.0 | 7.0; 16.0 | 8.0; 16.0 | 9.0; 16.0 | 10.0
0307-547 | Metric countersinks with matching shank diameters
Diameter / shank reference: 10 / 3; 13 / 4; 16 / 5; 20 / 6, metric dimensions to confirm; Standard reference: DIN 6446B
0307-548 | HSS taper drills with countersink
Dia — dimensional units and current drawing to confirm: 3.0; 3.5; 4.0; 4.5; 5.0; 5.5; 6.0
0307-549 | Hinge drill
Dia — dimensional units and current drawing to confirm: 2.0mm; 2.5; 2.8; 3.2
0307-550 | Carbide inserted brad point wood drill (Dowel drill)
Dia — dimensional units and current drawing to confirm: 3.2mm; 4.0; 4.8; 5.5; 6.5; 7.0; 8.0; 9.0; 10.0; 10.5; 11.0; 12.0; 13.0
0307-551 | 4-flute wood bits
Construction / finish choices: HCS; HSS; confirm availability for each size; Dia. | Oal — verify units and ordered drawing: 10 | 120; 11 | 120; 12 | 120; 13 | 120; 14 | 120; 15 | 120; 16 | 120; 18 | 120; 19 | 120; 20 | 120; 21 | 120; 22 | 120; 24 | 120; 25 | 120; 26 | 120; 28 | 120; 30 | 120; 32 | 120; 34 | 120; 35 | 120; 36 | 120; 38 | 120; 40 | 120
0307-552 | Plug cutter
Dia | L1 Oal — dimensional units and current drawing to confirm: 6mm | 45mm; 9.5 | 45; 12.5 | 45; 16.0 | 45; 9.5 | 110; 12.5 | 110; 16.0 | 110; 19.0 | 110; 22.0 | 110; 25.0 | 110; 32.0 | 110; 38.0 | 110; 45.0 | 110; 50.0 | 110; 65.0 | 110; 75.0 | 110; 90.0 | 110; 19.0 | 45; 22.5 | 45
0307-553 | Tenon dowel&plug cutter
mm | mm — verify units and ordered drawing: 9.5 | 140; 12.5 | 140; 16.0 | 140; 19.0 | 140; 22.0 | 140; 25.0 | 140; 28.5 | 140; 32.0 | 160; 35.0 | 160; 38.0 | 160; 45.0 | 160; 48.0 | 160; 50.0 | 160; 54.0 | 160; 57.0 | 160; 60.0 | 160
0307-554 | Dowel pin
size | Qty/bag | Unlabelled dimension — verify units and ordered drawing: 6x30mm | 200pc | for board thickness from 12-14mm; 6x30 | 50pc | for board thickness from 12-14mm; 8x40 | 150pc | for board thickness from 15-18mm; 8x40 | 40pc | for board thickness from 15-18mm; 10x40 | 120pc | for board thickness from 19-30mm; 10x40 | 30pc | for board thickness from 19-30mm
0307-555 | Silicon-carbide cleaning-disc pack
Pack: 5 pieces; Diameter / thickness / bore: 4.5 / 3/5 / 7/8 inch; Grit: 46; Stated maximum speed: 13,300 rpm; supplied marking governs; Diameter | thickness | bore (inch): 4.5 | 3/5 | 7/8; confirm the exact wheel and marking
0307-556 | Bevel brush with M14 nut crimped wire
Size — verify units and ordered drawing: 100; 115
0307-557 | Wheel brush with φ 6 shaft crimped wire
Size — verify units and ordered drawing: 50; 60; 80
0307-558 | Cup brush with M14 nut twisted wire
Size — verify units and ordered drawing: 60; 80; 100; 120
0307-559 | Cup brush with M14 nut crimped wire
Size — verify units and ordered drawing: 60; 80; 100; 120
0307-560 | Cup brush with φ 6 shaft crimped
Size — verify units and ordered drawing: 50; 60; 80
0307-561 | Cup brush with φ6 shaft twisted wire
Size — verify units and ordered drawing: 60; 80
0307-562 | Adhesive resin bonded sanding paper
Dia. — verify units and ordered drawing: 115mm; 125; 178
0307-563 | Coated abrasive sanding disc with hole
Dia. — verify units and ordered drawing: 115mm; 125; 150
0307-564 | Abrasive sheet for Delta sander
Dia. — verify units and ordered drawing: 95mm; 105; 120
0307-565 | Sand paper sheets
Width × Length — dimensional units and current drawing to confirm: 93×230mm; 115×280
0307-566 | Rectangular sanding sponges, thick compact form
Dimensions: 100 × 70 × 25 mm
0307-567 | Thin sanding sponges
Dimensions: 140 × 115 × 5 mm
0307-568 | Wide rectangular sanding sponges
Dimensions: 125 × 90 × 25 mm
0307-569 | Narrow rectangular sanding sponges
Dimensions: 125 × 75 × 25 mm
0307-570 | Medium-thickness sanding sponges
Dimensions: 125 × 100 × 12 mm
0307-571 | Diamond hand pad
size | grit | color | bondtype — verify units and ordered drawing: 90x55 | 60 | green | electroplated; 90x55 | 120 | black | electroplated; 90x55 | 200 | red | electroplated; 90x55 | 400 | yellow | electroplated; 90x55 | 800 | white | resin; 90x55 | 1800 | blue | resin; 90x55 | 3500 | orange | resin; 90x55 | 7000 | brown | resin
0307-572 | Dry sand paper sheet for wood
Width × Over long — dimensional units and current drawing to confirm: 230×280mm
0307-573 | Water proof abrasive paper sheets
Width × Length — dimensional units and current drawing to confirm: 230×280mm
0307-574 | Abrasive cloth sheets
Width × Length — dimensional units and current drawing to confirm: 230×280mm
0307-575 | Aluminium oxide roll-shaped abrasive cloth
Width | Length — verify units and ordered drawing: 115mm | 10m; 115mm | 30m; 115mm | 50m; 150mm | 10m; 150mm | 30m; 150mm | 50m
0307-576 | Drum sleeve
Width × Over long — verify units and ordered drawing: 1/2×4-1/2”; 3/4×4-1/2; 1×4-1/2; 1-1/2×4-1/2; 2×4-1/2; 3×4-1/2
0307-577 | Drum sander
size — verify units and ordered drawing: 1/4”×1/2”×1/8”; 1/4”×1/2”×1/4”; 3/8”×1/2”×1/8”; 3/8”×1/2”×1/4”; 1/2”×1/2”×1/8”; 1/2”×1/2”×1/4”; 3/4”×1”×1/8”; 3/4”×1”×1/4”; 1”×1”×1/8”; 1”×1”×1/4”; 1-1/2”×1-1/2”×1/4”; 2”×1/2”×1/4”; 1/2”×2”×1/8”; 1/2”×2”×1/4”; 3/4”×2”×1/8”; 3/4”×2”×1/4”; 1”×2”×1/4”; 1-1/2”×2”×1/4”
0307-578 | Sanding belts
size — dimensional units and current drawing to confirm: 13×457; 40×305; 50×686; 60×400; 63×410; 65×410; 75×457; 75×480; 75×510; 75×533; 75×610; 100×560; 100×610; 100×620; 100×915; 102×552; 105×620; 150×1220
0307-579 | Screen mesh
Length×Width — verify units and ordered drawing: 110×270mm; 115×280mm; 125×280mm
0307-580 | hook-and-loop silicon mesh for dry wall
Dia. — verify units and ordered drawing: 115mm; 125mm; 180mm; 225mm
0307-581 | Felling-axe
Weight: 1600g Lengh of handle: 80cm made of White Birch; Length: 80cm made of White Birch; Construction: White-birch handle
0307-582 | Screwdriver
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-583 | Plastic hand saw guide
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-584 | Folding knife
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-585 | Claw hammer-1
Construction: TPR/plastic handle
0307-586 | Claw hammer British type
Size options: 21mm 23mm 25mm 27mm 29mm; Construction: TPR/plastic handle
0307-587 | Machinist hammer German type
Size options: 100G 200G 300G 400G 500G 600G 800G 1KG 1.5KG 2KG; Construction: TPR/plastic handle
0307-588 | Bush hammer German type
Size options: 800G 1KG 1.25KG 1.5KG 2KG
0307-589 | Round head hammer
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-590 | Round head hammer -2
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-591 | Pane hammer
Size options: 200G 300G 500G
0307-592 | Rubber hammer
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-593 | Machinist hammer French type
Size options: 20mm 25mm 28mm 30mm 35mm 40mm 45mm
0307-594 | Joiner's hammer French type
Size options: 20mm 22mm 25mm 28mm 30mm
0307-595 | Cross pein hammer
Size options: 20mm 22mm 25mm
0307-596 | Roofing hammer
Size options: 600G
0307-597 | Sledge hammer
Size options: 2LB 3LB 4LB
0307-598 | Mason's hammer
Size options: 600G
0307-599 | Claw hammer British type
Size options: 21mm 23mm 25mm 27mm 29mm
0307-600 | Claw hammer British type
Size options: 21mm 23mm
0307-601 | Claw hammer British type
Size options: 21mm
0307-602 | Bricklayer's hammer
Size options: 600G
0307-603 | Claw hammer French type
Size options: 600G
0307-604 | Claw hammer Italian type
Size options: 300G 400G 500G
0307-605 | Garden hoe
Size options: 600G
0307-606 | Roofing hammer
Size options: 600G; Construction: Iron handle
0307-607 | Sectorial axe
Size options: 600G; Construction: Iron handle
0307-608 | Stone hammer German type
Size options: 800G 1000G 1250G 1500G 2000G
0307-609 | Stone hammer German type
Size options: 800G 1000G 1250G 1500G 2000G; Construction: Wood handle; Bleached wood handle
0307-610 | Stone hammer
Size options: 2LB 2.5LB 3LB 4LB; Construction: One-piece construction
0307-611 | Stone hammer America type
Size options: 2LB 2.5LB 3LB 4LB; Construction: Glass-fibre handle
0307-612 | Magnetic bits holder
Length — verify units and ordered drawing: 50mm; 60; 75; 100; 150; 200; 300
0307-613 | Quick release bit holder
type — verify units and ordered drawing: upward; downward
0307-614 | Copper plating bit holder
type — verify units and ordered drawing: quick change shank; SDS plus
0307-615 | Morse taper drill chuck arbors with tang
Taper-interface designation | L | D — verify units and ordered drawing: MS1-B10 | 84 | 10.094; MS1-B12 | 88 | 12.065; MS1-B16 | 94 | 15.733; MS1-B18 | 100 | 17.78; MS1-JT0 | 80 | 6.35; MS1-JT1 | 85 | 9.754; MS1-JT2 | 91 | 14.199; MS1-JT3 | 99 | 20.599; MS1-JT6 | 94 | 17.17; MS1-JT33 | 94 | 15.85; MS2-B10 | 97 | 10.094; MS2-B12 | 101 | 12.065; MS2-B16 | 107 | 15.733; MS2-B18 | 115 | 17.78; MS2-B22 | 124 | 21.793; MS2-JT0 | 93 | 6.35; MS2-JT1 | 98 | 9.754; MS2-JT2 | 104 | 14.199; MS2-JT3 | 112 | 20.599; MS2-JT4 | 124 | 28.55; MS2-JT6 | 107 | 17.17; MS2-JT33 | 107 | 15.85; MS3-B10 | 116 | 10.094; MS3-B12 | 120 | 12.065; MS3-B16 | 126 | 15.733; MS3-B18 | 134 | 17.78; MS3-B22 | 143 | 21.793; MS3-B24 | 153 | 23.825; MS3-JT0 | 112 | 8; MS3-JT1 | 117 | 9.754; MS3-JT2 | 123 | 14.199; MS3-JT3 | 132 | 20.599; MS3-JT4 | 143 | 28.55; MS3-JT5 | 148 | 35.89; MS3-JT6 | 126 | 17.17; MS3-JT33 | 126 | 15.85; MS4-B12 | 145 | 12.065; MS4-B16 | 151 | 15.733; MS4-B18 | 159 | 17.788; MS4-B22 | 167 | 21.793; MS4-B24 | 177 | 23.825; MS4-JT2 | 148 | 14.199; MS4-JT33 | 157 | 20.599; MS4-JT4 | 168 | 28.55; MS4-JT6 | 151 | 17.17; MS4-JT33 | 151 | 15.85; MS5-B16 | 184 | 15.733; MS5-B18 | 192 | 17.78; MS5-B22 | 200 | 21.793; MS5-B24 | 210 | 23.825; MS5-JT3 | 190 | 20.599; MS5-JT4 | 201 | 28.55; MS5-JT5 | 206 | 35.89; MS5-JT6 | 184 | 17.17; MS5-JT33 | 184 | 15.85; MS6-JT6 | 246 | 17.17
0307-616 | Threaded drill-chuck arbors with tang
MS.No.S | L | L1 | L2 | D | d | M — verify units and ordered drawing: MS1 | 83 | 13.5 | 62 | 24 | 12.065 | 3/8”-24UNF; MS1 | 85 | 15.5 | 62 | 24 | 12.065 | 1/2”-20UNF; MS1 | 85 | 15.5 | 62 | 24 | 12.065 | M12×1.25; MS1 | 88 | 17.5 | 62 | 27 | 12.065 | 5/8”-16UNF; MS2 | 97 | 13.5 | 75 | 24 | 17.78 | M10×1-6H; MS2 | 97 | 13.5 | 75 | 24 | 17.78 | 3/8”-24UNF-2A; MS2 | 100 | 15.5 | 75 | 24 | 17.78 | M12×1.25-6H; MS2 | 100 | 15.5 | 75 | 24 | 17.78 | 1/2”-20UNF-2A; MS2 | 103 | 17.5 | 75 | 29 | 17.78 | M16×1.5-6H; MS2 | 103 | 17.5 | 75 | 29 | 17.78 | 5/8”-16UNF-2A; MS2 | 103 | 17.5 | 75 | 29 | 17.78 | 5/8”-20UNF-2A; MS2 | 116 | 13.5 | 75 | 24 | 17.78 | M10×1-6H; MS3 | 116 | 13.5 | 94 | 24 | 23.825 | 3/8”-24UNF-2A; MS3 | 119 | 15.5 | 94 | 27 | 23.825 | M12×1.25-6H; MS3 | 119 | 15.5 | 94 | 27 | 23.825 | 1/2”-20UNF-2A; MS3 | 122 | 17.5 | 94 | 29 | 23.825 | M16×1.5-6H; MS3 | 122 | 17.5 | 94 | 29 | 23.825 | 5/8”-16UNF-2A; MS4 | 145 | 15.5 | 117.5 | 31.6 | 31.267 | M12×1.25-6H
0307-617 | Morse straight to jacobs taper arbors
Morse-to-B interface | length; units to confirm: MT1-B10 | 87; MT1-B12 | 91; MT1-B16 | 98; MT1-B18 | 106; MT2-B10 | 102; MT2-B12 | 106; MT2-B16 | 113; MT2-B18 | 121; MT2-B22 | 126; MT2-B24 | 136; MT3-B10 | 121; MT3-B12 | 125; MT3-B16 | 132; MT3-B18 | 140; MT3-B22 | 148; MT3-B24 | 158; MT4-B10 | 146; MT4-B12 | 150; MT4-B16 | 157; MT4-B18 | 165; MT4-B22 | 173; MT4-B24 | 183; MT5-B12 | 182; MT5-B16 | 189; MT5-B18 | 197; MT5-B22 | 205; MT5-B24 | 215; Morse-to-Jacobs interface | length; independent schedule, units to confirm: MT1-JT0 | 82; MT1-JT1 | 87; MT1-JT2 | 93; MT1-JT2(short) | 92; MT1-JT33 | 96; MT1-JT6 | 96; MT2-JT3 | 101; MT2-JT0 | 97; MT2-JT1 | 102; MT2-JT2 | 108; MT2-JT2(short) | 107; MT2-JT33 | 111; MT2-JT6 | 111; MT2-JT3 | 112; MT2-JT4 | 124; MT2-JT5 | 130; MT3-JT1 | 121; MT3-JT2 | 127; MT3-JT2(short) | 126; MT3-JT33 | 130; MT3-JT6 | 130; MT3-JT3 | 135; MT3-JT4 | 147; MT3-JT5 | 153; MT4-JT2 | 152; MT4-JT2(short) | 151; MT4-JT33 | 155; Straight-shank size | taper designation | L | D | I; units per approved drawing: 1/2”×2-1/2” | 0 | 77 | 12.7 | 63.5; 1/2”×2-1/2” | 1 | 83 | 12.7 | 63.5; 1/2”×2-1/2” | 2 | 88.5 | 12.7 | 63.5; 1/2”×2-1/2” | 3 | 97 | 12.7 | 63.5; 1/2”×2-1/2” | 33 | 91.5 | 12.7 | 63.5; 1/2”×2-1/2” | 6 | 91.5 | 12.7 | 63.5; 5/8”×2-1/2” | 1 | 83 | 15.875 | 63.5; 5/8”×2-1/2” | 2 | 88.5 | 15.875 | 63.5; 5/8”×2-1/2” | 3 | 97 | 15.875 | 63.5; 5/8”×2-1/2” | 33 | 91.5 | 15.875 | 63.5; 5/8”×2-1/2” | 4 | 108.5 | 15.875 | 63.5; 5/8”×2-1/2” | 6 | 91.5 | 15.875 | 63.5; 3/4”×3” | 1 | 95.5 | 19.05 | 76.2; 3/4”×3” | 2 | 101 | 19.05 | 76.2; 3/4”×3” | 3 | 110 | 19.05 | 76.2; 3/4”×3” | 33 | 104.5 | 19.05 | 76.2; 3/4”×3” | 4 | 121 | 19.05 | 76.2; 3/4”×3” | 6 | 104.5 | 19.05 | 76.2; 1”×3” | 2 | 101 | 25.4 | 76.2; 1”×3” | 3 | 110 | 25.4 | 76.2; 1”×3” | 33 | 104.5 | 25.4 | 76.2; 1”×3” | 4 | 121 | 25.4 | 76.2; 1”×3” | 6 | 104.5 | 25.4 | 76.2
0307-618 | Mason's hammer Australian type
Size options: 600G; Construction: TPR/plastic handle
0307-619 | Stone hammer Spanish type
Size options: 700G 800G 1000G 1250G 1400G 1500G; Construction: Wood handle
0307-620 | Sledge hammer
Size options: 2LB 3LB 4LB 6LB 8LB 10LB 12LB
0307-621 | Sledge cross peen hammer
Size options: 2LB 2.5LB 3LB 4LB; Construction: TPR/plastic handle
0307-622 | Ball peen hammer
Construction: TPR/plastic handle
0307-623 | Moon hammer
Size options: 300G; Construction: Wood handle
0307-624 | Spring handle chipping hammer
Size options: 200G 300G 500G; Construction: Spring-metal handle
0307-625 | Spring handle safety hammer
Size options: 300G 400G
0307-626 | Hoof testing hammer
Size options: 200G 300G
0307-627 | Rubber hammer
Construction: TPR/plastic handle
0307-628 | Shovel w/o handle
Size options: A=270mm B=270mm C=400mm
0307-629 | Shovel w/o handle
Size options: A=280mm B=290mm C=350mm
0307-630 | Shovel w/o handle
Size options: A=280mm B=280mm C=350mm
0307-631 | Shovel w/o handle
Size options: A=275mm B=390mm C=515mm
0307-632 | Shovel w/o handle
Size options: A=240mm B=300mm C=420mm
0307-633 | Shovel
Size options: A=245mm B=310mm C=1000mm
0307-634 | Shovel
Size options: A=190mm B=310mm C=1000mm
0307-635 | Shovel
Size options: A=280mm B=330mm C=1000mm
0307-636 | Crowbar
Size options: 14x100mm 16x300mm 18x300mm
0307-637 | 24pcs comb. drill
Size options: drill TiN coated: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5mm Nut setter: 5, 6, 8, 10 50mm bits: PH1, 2, 3 H1, 2, 3 SL 5, 6; type — verify units and ordered drawing: plastic case
0307-638 | 17pcs comb. drill
Size options: HSS twist drill 1.5,2,2.5,3,3.2,3.5,4,4.5,5,5.5,6mm masonry drill 3,4,5,6,8,10mm; type — verify units and ordered drawing: plastic case
0307-639 | 16pcs comb. drill
Size options: HSS twist drill 2, 2.5, 3, 4, 5, 6mm masonry drill 4, 5, 6, 7, 8mm wood drill 3, 4, 5, 6, 8mm; type — verify units and ordered drawing: plastic case
0307-640 | 15pcs HSS twist drill
Size options: 2 x 1.5 mm, 2 x 2.0 mm, 2 x 2.5 mm 1 x 3.0 mm, 1 x 3.2 mm, 1 x 3.5 mm 1 x 4.0 mm, 1 x 4.5 mm, 1 x 5.0 mm 1 x 6.0 mm, 1 x 8.0 mm, 1 x 10.0 mm; type — verify units and ordered drawing: plastic case
0307-641 | 15pcs masonry drill
Size options: 3 x 3.0 mm, 3 x 4.0 mm, 3 x 5.0 mm, 2 x 6.0 mm, 2 x 8.0 mm, 2 x 10.0 mm; type — verify units and ordered drawing: plastic case
0307-642 | 9pcs comb. drill
Size options: HSS / masonry / wood 5-6-8mm; type — verify units and ordered drawing: plastic case
0307-643 | 10pcs damaged bolts&nut extractor
Size options: 1# - 10#; type — verify units and ordered drawing: 10pcs
0307-644 | Mixed electrical-maintenance hand-tool assortment
type — verify units and ordered drawing: 11pcs
0307-645 | 10pcs hex key wrench
Size options: 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8, 10 mm; key lengths and holder arrangement to confirm; type — verify units and ordered drawing: 10pcs
0307-646 | 8pcs CV-impact sockets
Size options: 26,27,29,30,32,35,36,38mm; type — verify units and ordered drawing: 8pcs
0307-647 | 62pcs bits set
Size options: PH:#0x2,#1x2,#2x4,#3x2 PZ:#0x2,#1x2,#2x4,#3x2 Hex:2x2,3x2,4x2,5x2,6x2 Slotted: 3x2,4x2,5x2,6x2,7 T:10,15x2,20x2,25x2,27,30,40 TT :10,15x2,20x2,25x2,27,30,40 1 pc quick release bit holder 1 pc magnetic bit holder 1 pc 1/4" socket adapter; type — verify units and ordered drawing: 62pcs
0307-648 | Bits set assortment
Size options: 9pc 1/4"DR socket:5、6、7、8、9、10、11、12、13mm 34pc 1/4"bit: PH1-2-3-4; PZ1-2-3-4; HEX 2-2.5-3-4-5-6； SLD3-4-4.5-5-5.5-6; SQ0-1-2-3; U#4-6-8-10 six-lobe 8-10-15-20-25-27-30 1pc ratchet screwdriver 1pc 1/4"-1/4" socket adaptor; type — verify units and ordered drawing: 46pcs
0307-649 | 32pcs bits set
Size options: 1/4"x25mm bit set PH0. PH1 PH2 PH3 PZ0 PZ1 PZ2 PZ3 SL4、5、6、7 H3 H4 H5 H6 T10、15、20、25、27, 30, 40 six-lobe T10、15、20、25、27, 30, 40 six-lobe w/pin 1/4" socket adaptor and bit holder with magnetic; type — verify units and ordered drawing: 32pcs
0307-650 | Bits set assortment
Size options: 30pcs 25mm bits CRV T10x2, T15x2, T20x2, T25x2, T30x2, T40x2, PZ1x2, PZ2x3, PZ3x1, PH1x2, PH2x2, PH3x1, H3, H4, H5, H6, SL4.5, SL5.5, SL6.5 1pc bit holder 60mm long; type — verify units and ordered drawing: 31pcs
0307-651 | Bits set assortment
Size options: 1/4"DR socket: 4,4.5,5,5.5,6,7,8,9,10,11,12,13,14 ph:1,2,3 pz:1,2,3 sld:4,5,6 hex:4,5,6 1pcs ratchet handle 1pcs bit coupler 1pcs extension bar 2"; type — verify units and ordered drawing: 28pcs
0307-652 | 25pcs socket&bits set
Size options: 12pcs 6pt.metric sockets: 4,4.5,5,5.5,6,7,8,9,10,11,12,13mm 12pc socket bits: PHILLIPS PH1,PH2; SLOTTED 3,4,5,6,7mm HEX 3,4,5,6,8mm 1pc accessory: quick release ratchet handle; type — verify units and ordered drawing: 25pcs
0307-653 | 22pcs bits set
Size options: PH:#1,#2,#3 PZ:#1,#2,#3 HEX:3,4,5,6 slotted:4,5 TT:10,15,20,25,30 magnetic nut6,8,10 1pc quick release bit holder 1pc 1/4"socket adaptor; type — verify units and ordered drawing: 22pcs
0307-654 | 15pcs bits set
Size options: HSS drill hex: 2,2.5,3,4mm 25mm bits: PH1-2,PZ1-2,SL3-4 Nut setter: 6,8,10,13mm 1/4”x60mm bits holder; type — verify units and ordered drawing: 15pcs
0307-655 | 11pcs bits set
Size options: PH:1,2,3 PZ:1,2,3 T:20,25,30,40 75mm bit holder; type — verify units and ordered drawing: 11pcs TiN
0307-656 | 39pcs tap and die
Size options: 16pc tap M3-M10 1pc tap 1/8 npt - 27 16pc die M3-M10 1pc tap 1/8 npt - 27 1pc tap wrench M3-M12 1pc die holder Dia. 25 x 9 1pc screwdriver slot 3 x 40 1pc T-tap wrench M3 - 6 1pc screw pitch gauge 0.5 - 1.75; Type — verify units and ordered drawing: plastic case
0307-657 | 14pcs tap and die
Size options: 4pc hss twist drill 2.5-5.0 4pc die M3-M6 4pc tap M3-M6 1pc tap wrench 0# M1-M8 1pc die holder Dia. 20 x 7 with 1 Screw; Type — verify units and ordered drawing: plastic case
0307-658 | 9pcs tap
Size options: 4pc hss twist drill 2.5-6.0 4pc screw extractor 1#-4# 1pc tap Wrench 1# M1-M10; Type — verify units and ordered drawing: plastic case
0307-659 | 3pcs tap
Size options: M3-M20; Type — verify units and ordered drawing: plastic box
0307-660 | 5pcs HSS rotary burrs
Size options: 6mm shank; Type — verify units and ordered drawing: 5pcs
0307-661 | 20pcs carbide rotary burrs
Type — verify units and ordered drawing: Alu case
0307-662 | 8pcs carbide rotary burrs
Type — verify units and ordered drawing: plastic case
0307-663 | 8pcs HSS rotary burrs
Type — verify units and ordered drawing: Alu case
0307-664 | 12pcs reciprocating saw blade
Size options: 4pc 6 in. x 6TPI,BIM 3pc 6 in. x 18TPI,BIM 2pc 8 in. x 14TPI,BIM 2pc 9 in. x 6TPI,BIM 1pc 9 in. x 10TPI,DEMO,BIM; Size — verify units and ordered drawing: blister
0307-665 | 20pcs jig saw blade
Type — verify units and ordered drawing: T-shank
0307-666 | 4pcs TiN coated multi function drill
Size options: 1 x HSS step drill (4-12mm) 1 x HSS tube drill (8-20mm) 1 x HSS drill saw (6mm) 1 x HSS countersink (12.4mm) 1/4" quick change shaft, (for hexagonal adapter); Type — verify units and ordered drawing: TiN coated
0307-667 | Deburring countersink assortments
Size — verify units and ordered drawing: 3pcs; 4pcs; 5pcs; 6pcs
0307-668 | 6pcs countersink
Size — verify units and ordered drawing: standard; TiN coated
0307-669 | 11pcs carbide insert tool bits
Size — verify units and ordered drawing: 8x8; 10x10
0307-670 | 8pcs TCT annular cutter
Type — verify units and ordered drawing: TCT
0307-671 | 7pcs HSS annular cutter
Size — verify units and ordered drawing: HSS; HSS TiN coated
0307-672 | 20pcs HSS ground end mills
Size options: 2 and 4 flutes 3, 4, 5, 6, 8, 10, 12, 14, 16, 20mm; Size — verify units and ordered drawing: HSS ground; HSS ground TiN coated
0307-673 | 3pcs step drill
Size — verify units and ordered drawing: 3/16"-1/2" 6 steps 1/4"-3/4" 9 steps 1/8"-1/2" 13steps
0307-674 | 5pcs HSS S&D drill
Size — verify units and ordered drawing: 9/16-5/8-3/4-7/8-1"
0307-675 | 25pcs HSS twist drill
Size options: 1 - 13 x 0.5mm; Size — verify units and ordered drawing: roll forged; fully ground; fully ground TiN coated; fully ground cobalt; fully ground black&golden
0307-676 | 19pcs HSS twist drill
Size options: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7,7.5, 8, 8.5, 9, 9.5,10mm; Size — verify units and ordered drawing: roll forged; fully ground; fully ground TiN coated; fully ground cobalt; fully ground black&golden
0307-677 | 5pcs HSS twist drill
Size options: 3-4-5-6-8mm; Size — verify units and ordered drawing: roll forged; fully ground; fully ground TiN coated; fully ground cobalt; fully ground black oxied
0307-678 | 6pcs countersink arc groove
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-679 | 9pcs spot weld cutter
Size options: 1pc 3/8" cutter blade with arbor 1pc 5/8" cutter blade with arbor. 2pc 3/8" replacement blades. 2pc 5/16" relacement blades 2pc replacements pilots 1pc hex key; Type — verify units and ordered drawing: 9pc
0307-680 | Metric tap-and-die assortment
Thread selection: M3–M10; select the pitch for each tool from an approved bill of materials.; type — verify units and ordered drawing: 65Mn
0307-681 | Straight-flute TiN step-drill assortment
Ranges: 4–12; 4–20; 6–30 mm; Set: 3 pieces
0307-682 | Blasted SDS-plus hammer-drill set
Pack: 7 pieces; Diameter × length: 5/6/8 × 110 mm; 6/8/10/12 × 160 mm
0307-683 | Spiral-flute metric tap assortment
Sizes: M3, M4, M5, M6, M8, M10, M12; Pack: 7 pieces
0307-684 | Straight-flute metric tap assortment
Sizes: M3, M4, M5, M6, M8, M10, M12; Pack: 7 pieces
0307-685 | 19pcs HSS twist drill
Size options: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7,7.5, 8, 8.5, 9, 9.5, 10mm; Size — verify units and ordered drawing: roll forged; fully ground; sidewinder; fully ground TiN coated; fully ground cobalt
0307-686 | 4pcs TCT hole saw
Size options: 21, 27, 33, 42mm; Type — verify units and ordered drawing: Alu case
0307-687 | 99pcs HSS twist drill
Size options: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5，6, 6.5, 8, 10mm; Size — verify units and ordered drawing: roll forged; fully ground; fully ground TiN coated; fully ground cobalt
0307-688 | 3pcs diamond vacuum brazed hole saw
Size options: 6,8,10mm; Size — verify units and ordered drawing: Alu case
0307-689 | 7pcs carbide grit hole saw
Size options: 22, 28, 44, 73mm 2pc arbors 1pc pilot drill; Size — verify units and ordered drawing: 7pc
0307-690 | 11pcs carbide grit hole saw
Size options: 6pc carbide hole saw 22,28,35,44,67,73mm 2pc diamond disc 115mm continues and turbo 2pc A1 and A2 arbors 1pc allan key; Size — verify units and ordered drawing: 11pc
0307-691 | 9pcs carbide grit hole saw
Size options: 22, 28, 35, 44, 68, 73mm 2pcs arbors 1pc hex key; Size — verify units and ordered drawing: 9pc
0307-692 | 8pcs carbide grit hole saw
Size options: 33-43-53-67-73-83mm 1pc center drill 1pc fitting plate; Size — verify units and ordered drawing: 8pc
0307-693 | 12pcs SDS plus shank hammer drill
Size options: 5,6x110mm, 8,10,12x160mm 14,16x210mm, 18x300mm, 20x450mm Point chisel (250mm), flat chisel (20 x 250mm) Groove chisel (250mm); Size — verify units and ordered drawing: BMC
0307-694 | 12pcs SDS plus shank hammer drill
Size options: 5,6x110mm, 8,10,12x160mm 10,12x210mm, 10,12,16x450mm Point chisel (250mm), flat chisel (20 x 250mm); Size — verify units and ordered drawing: alu case
0307-695 | 6pcs SDS plus shank hammer drill
Size options: 5,6,8x110mm, 6,8,10x160mm; Size — verify units and ordered drawing: plastic case
0307-696 | 6pcs glass drill
Size options: 4, 5,6, 8, 10,12mm; Size — verify units and ordered drawing: plastic case
0307-697 | 13pcs masonry drill
Size options: 3,4, 5, 5.5, 6, 6, 6.5, 7, 7, 7.5, 8, 10, 12mm; Size — verify units and ordered drawing: metal case
0307-698 | 8pcs masonry drill
Size options: 3, 4, 5, 6, 7, 8, 9, 10mm; Size — verify units and ordered drawing: Zn plated; Ni plated; Cr plated; Satin finished; black flute bright shank and margin
0307-699 | 5pcs masonry drill with hex shank
Size options: 5.5,6,6.5,7,8mm; Size — verify units and ordered drawing: sandblasted
0307-700 | 5pcs masonry drill
Size options: 4,5,6,8,10mm; Size — verify units and ordered drawing: Zn plated; Ni plated; Cr plated
0307-701 | 4pcs masonry drill
Size options: 5, 6, 8,10mm; Size — verify units and ordered drawing: black&white
0307-702 | 16pcs TCT multi-function hole saw
Size options: 13pc std hole saw 3pc arbors; Type — verify units and ordered drawing: alu case
0307-703 | Adjustable circle hole cutter
Range options: 40–120 or 40–300 mm
0307-704 | Metric router-profile assortment
Straight references: 3.2 × 14; 6.5 × 20; 12.7 × 25; 19 × 20 mm; Dovetail / pilot / flush trim: 12.7 × 8; 6.5 × 30; 12.7 × 12 mm; Mortising: 12.7 × 13 mm; Core box: R3.2 / 7 / 6 mm reference; 90° V: 12.7 × 10 mm; 45° guided chamfer: 30 × 14 mm; Guided cove: 9.5 / 30 / 14 mm reference; Guided rabbet: 30 × 10 mm; Roman ogee: 25 × 12 mm; Round-over: R10 / 32 / 16 mm reference; Size — verify units and ordered drawing: alu case
0307-705 | 4pcs router bits
Size options: 1pc straight bit 63mm x 12.7mm 2pc straight bit 50mm x 12.7mm with 1/2” shank 1pc flush trim bit 25.4mm x 12.7mm with 1/4” shank; Size — verify units and ordered drawing: wood case
0307-706 | 6pcs wooden turning tools
Size — verify units and ordered drawing: HSS wood case
0307-707 | 5pcs tenon dowel&plug cutter
Size options: 15,20,25,30,35mm; Size — verify units and ordered drawing: Standard; SDS shank; SDS shank TiN coated
0307-708 | 4pcs plug cutter (claw type)
Size options: 6, 8, 10, 13mm; Size — verify units and ordered drawing: cut tapered wood
0307-709 | 4pcs plug cutter (chamfered type)
Size options: 6, 8, 10, 13mm; Size — verify units and ordered drawing: cut cylinder wood
0307-710 | 6pcs plug cutter (chamfered type)
Size options: 10,12,16,20,22,25mm; Size — verify units and ordered drawing: Standard
0307-711 | 7pcs shell drill countersink
Size — verify units and ordered drawing: 3,3.5,4,4.5,5,5.5,6mm
0307-712 | 6pcs forstner and tenon dowerl&plug cutter
Size options: 3pcs cylinder boring bits 15,20,25mm tenon dowel&plug cutter each 1pc; Size — verify units and ordered drawing: 6pcs
0307-713 | 16pcs forstner bits
Size options: 6,10,12,16,20,22,25,28,32,35,38,41,45,48,51,54mm; Size — verify units and ordered drawing: Standard; TiN coated
0307-714 | 5pcs forstner bits
Size options: 15,20,25,30,35 mm; Size — verify units and ordered drawing: Standard; TiN coated; Quick change shank; Quick change shank TiN coated; SDS plus shank; SDS plus shank TiN coated
0307-715 | 6pcs spade(flat) bit with hex shank
Size options: 10,13,16,19,22,25mm; Size — verify units and ordered drawing: standard; TiN coated
0307-716 | 6pcs spade( flat) bit
Size options: 10,12,16,18,20,25mm; Size — verify units and ordered drawing: Hex shank; TiN coated; SDS shank; SDS shank TiN coated; Quick change shank; Quick change shank TiN coated
0307-717 | 6pcs auger bits
Size options: 6,8,10,12,16,20mm; Size — verify units and ordered drawing: 200mm standard; 230mm standard; 300mm standard; 400mm standard; 460mm standard; 200mm TiN coated; 230mm TiN coated; 300mm TiN coated; 400mm TiN coated; 460mm TiN coated; SDS shank 200mm; SDS shank 230mm; SDS shank 300mm; SDS shank 400mm; SDS shank 460mm; SDS shank 200mm TiN coated; SDS shank 230mm TiN coated; SDS shank 300mm TiN coated; SDS shank 400mm TiN coated; SDS shank 460mm TiN coated
0307-718 | 5pcs mortise bits
Size options: 6,8,10,12,16mm; Size — verify units and ordered drawing: standard; TiN coated
0307-719 | 6pcs 4-flute wood bits
Size options: 12, 16, 20, 22, 25, 28mm; Size — verify units and ordered drawing: alu case
0307-720 | 6pcs 4-flute wood bits
Size options: 12, 16, 20, 22, 25, 32mm; Size — verify units and ordered drawing: plastic box
0307-721 | 25pcs wood drill
Size options: 1.0 - 13.0 by 0.5mm; Size — verify units and ordered drawing: HSS
0307-722 | 19pcs wood drill
Size options: 1.0 - 10.0 by 0.5mm; Size — verify units and ordered drawing: HSS
0307-723 | 8pcs wood drill
Size options: 3-10 x 1mm; Size — verify units and ordered drawing: skin card; plastic case A; plastic case B; plastic case C
0307-724 | 12pcs carbon hole saw
Size options: 19,22,29,38,44,51,60,67,82mm, 2pc arbors, 1pc hex key; Type — verify units and ordered drawing: carbon steel; Type — verify units and ordered drawing (alternative schedule 2): carbon steel
0307-725 | Five-cutter carbide-tip hole-saw assortment
Size options: 5pcs hole saw : 2-1/2"(64mm); 3"(76mm); 3-1/2"(89mm); 4“（102mm); 5" (127mm) 1pc arbor with center drill and washer 1pc hex key; Type — verify units and ordered drawing: carbon steel
0307-726 | 10pcs reciprocating saw blade
Size options: 6" HCS x6 8" HCS x2 6" BiM x2; Size — verify units and ordered drawing: BiM+HCS
0307-727 | 135pcs comb. drill
Size options: 85pc TiN coated bits 25pc HSS drill 3,4,5,6,8mm 25pc HSS drill TiN coated 3,4,5,6,8mm; Packing — verify units and ordered drawing: alu case
0307-728 | Driver assortments with hanging clips
Layout 1: 50 mm hex × 5; star × 5; Layout 2: 50 mm hex × 3; star × 3; nut setters × 4; Layout 3: 25 mm Phillips × 3; hex × 3; slotted × 2; square × 2; 1/4 × 60 mm quick-release magnetic holder; Layout 4: Same 25 mm bit selection plus 1/4 × 140 mm adapter and 135 mm holder screwdriver; Layout 5: Hex × 8; sockets × 6; 1/4 × 60 mm quick-release adapter; Layout 6: Hex × 8; sockets × 6; 1/4 × 140 mm adapter; 135 mm holder screwdriver; Layout 7: 25 mm cross-drive × 2; star × 14; 1/4 × 60 mm holder; Layout 8: 25 mm star × 16; 1/4 × 60 mm holder; Layout 9: 25 mm star × 12; 45 mm nut setters × 4; 1/4 × 60 mm holder; Layout 10: 25 mm Phillips × 3; cross-drive × 3; slotted × 4; star × 5; hex × 5; type — verify units and ordered drawing: 10pcs; type — verify units and ordered drawing (alternative schedule 2): 10pcs; type — verify units and ordered drawing (alternative schedule 3): 11pcs; type — verify units and ordered drawing (alternative schedule 4): 12pcs; type — verify units and ordered drawing (alternative schedule 5): 15pcs; type — verify units and ordered drawing (alternative schedule 6): 16pcs; type — verify units and ordered drawing (alternative schedule 7): 17pcs; type — verify units and ordered drawing (alternative schedule 8): 17pcs; type — verify units and ordered drawing (alternative schedule 9): 17pcs; type — verify units and ordered drawing (alternative schedule 10): 20pcs
0307-729 | Mixed drill and driver assortment
Ti-treated HSS twist drills: 10 pieces: 2, 2, 3, 3, 4, 4, 4.5, 5, 5.5, 6 mm; Wood drills: 5 pieces: 4, 5, 6, 8, 10 mm; Masonry drills: 5 pieces: 4, 5, 6, 8, 10 mm; 25 mm drivers: 40 pieces: slotted 3×2, 4×2, 5×2, 6×2, 7×2 mm; Phillips 1×2, 2×3, 3×2; cross-drive 1×2, 2×3, 3×2; star 10,15,20,25,27,30,40; hex 2,3,4,5,6 mm; square 1×1,2×2,3×1; 50 mm drivers: 10 pieces: slotted 4,5,6,7 mm; Phillips 1,2,3; cross-drive 1,2,3; Nut drivers: 9 pieces: 5,6,7,8,9,10,11,12,13 mm; Other components: 1 bit holder; 1 countersink; Pack count: 81 pieces; approve the current component bill
0307-730 | Mixed wood, masonry and metal drilling pack
Driver groups: Slotted × 5; hex × 6; cross-drive × 4; Phillips × 4; star × 8; square × 3; Masonry drills: 5 × 1, 6 × 2, 8 × 2, 10 × 1 mm; Wood size references: 4, 5, 6, 7, 8, 10 mm; confirm count; Metal sizes: 2, 3, 4, 5, 6, 8 mm
0307-731 | Milling insert application families
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-732 | Internal/external thread-turning insert families
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-733 | Steel, stainless and cast-iron grooving inserts
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-734 | Heat-resistant-alloy turning inserts
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-735 | Non-ferrous turning inserts
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-736 | Cast-iron turning inserts
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-737 | Stainless-steel turning inserts
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-738 | Steel and alloy-steel turning inserts
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-739 | Rasp disc for wood
Dia. | type — verify units and ordered drawing: 85 | Flat; 100 | Flat; 110 | Flat; 115 | Flat; 125 | Flat; 85 | Beveled; 100 | Beveled; 110 | Beveled; 115 | Beveled; 125 | Beveled; 85 | Arc; 100 | Arc; 110 | Arc; 115 | Arc; 125 | Arc
0307-740 | Two-way mallet
Size options: 20mm 25mm 30mm 35mm 40mm 45mm 50mm; Construction: Wood handle
0307-741 | Wood handle axe
Size options: 500G 600G 800G 1000G 1250G 1400G 1600G
0307-742 | Wood handle axe
Size options: 800G; Construction: Wood handle
0307-743 | Camp axe
Size options: 600G
0307-744 | Rubber handle axe
Size options: 500G 600G
0307-745 | Adze
Size options: 300G 400G 500G; Construction: Wood handle
0307-746 | Pickaxe
Size options: 1500G 2000G; Construction: Wood handle
0307-747 | Elemental multi-function axe
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-748 | Grubbing mattock head
Size options: 600G
0307-749 | Pickax
Size options: 600G
0307-750 | Hammer head with handle
Selection brief: Confirm dimensions, material, interface and approved sample/drawing for this direction.
0307-751 | Garden hoe with fork
Size options: 400G
0307-752 | Curved cutting edge with relieved clearance solid-carbide drills, 3D direction
Diameter range: 3–20 mm; Depth class: 3D nominal direction; actual listed maximum depth is size-specific; Coolant: With/without coolant options; Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units: 3~3.7 / 6 / 62 / 20 / 14 / 36; 4~4.65 / 6 / 66 / 24 / 17 / 36; 4.8~6 / 6 / 66 / 28 / 20 / 36; 6.1~7 / 8 / 79 / 34 / 24 / 36; 7.1~8.0 / 8 / 79 / 41 / 29 / 36; 8.1~10 / 10 / 89 / 47 / 35 / 40; 10.25~12 / 12 / 102 / 55 / 40 / 45; 12.25~14 / 14 / 107 / 60 / 43 / 45; 14.25~16 / 16 / 115 / 65 / 45 / 48; 16.50~18 / 18 / 123 / 73 / 51 / 48; 18.50~20 / 20 / 131 / 75 / 55 / 50
0307-753 | Curved cutting edge with relieved clearance solid-carbide drills, 5D direction
Diameter range: 3–20 mm; Depth class: 5D nominal direction; actual listed maximum depth is size-specific; Coolant: With/without coolant options; Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units: 3~3.7 / 6 / 66 / 28 / 23 / 36; 4~4.65 / 6 / 74 / 36 / 29 / 36; 4.8~6 / 6 / 82 / 44 / 35 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 8.1~10 / 10 / 103 / 61 / 49 / 40; 10.25~12 / 12 / 118 / 71 / 56 / 45; 12.20~14 / 14 / 124 / 77 / 60 / 45; 14.25~16 / 16 / 133 / 83 / 63 / 48; 16.50~18 / 18 / 143 / 93 / 71 / 48; 18.50~20 / 20 / 153 / 101 / 77 / 50
0307-754 | Wave-shaped curved cutting edge solid-carbide drills, 3D direction
Diameter range: 3–20 mm; Depth class: 3D nominal direction; actual listed maximum depth is size-specific; Coolant: With/without coolant options; Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units: 3~3.7 / 6 / 62 / 20 / 14 / 36; 4.8~6 / 6 / 66 / 28 / 20 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 7.1~8.0 / 8 / 79 / 41 / 29 / 36; 8.1~10 / 10 / 89 / 47 / 35 / 40; 10.25~12 / 12 / 102 / 55 / 40 / 45; 12.25~14 / 14 / 107 / 60 / 43 / 45; 14.25~16 / 16 / 115 / 65 / 45 / 48; 16.50~18 / 18 / 123 / 73 / 51 / 48; 18.50~20 / 20 / 131 / 79 / 55 / 50
0307-755 | Wave-shaped curved cutting edge solid-carbide drills, 5D direction
Diameter range: 3–20 mm; Depth class: 5D nominal direction; actual listed maximum depth is size-specific; Coolant: With/without coolant options; Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units: 3~3.7 / 6 / 66 / 28 / 23 / 36; 4~4.65 / 6 / 74 / 36 / 29 / 36; 4.8~6 / 6 / 82 / 44 / 35 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 8.1~10 / 10 / 103 / 61 / 49 / 40; 10.25~12 / 12 / 118 / 71 / 56 / 45; 12.20~14 / 14 / 124 / 77 / 60 / 45; 14.25~16 / 16 / 133 / 83 / 63 / 48; 16.50~18 / 18 / 143 / 93 / 71 / 48; 18.50~20 / 20 / 153 / 101 / 77 / 50
0307-756 | Curved cutting edge solid-carbide drills, 3D direction
Diameter range: 3–20 mm; Depth class: 3D nominal direction; actual listed maximum depth is size-specific; Coolant: Internal-coolant direction; Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units: 3~3.7 / 6 / 62 / 20 / 14 / 36; 4.8~6 / 6 / 66 / 28 / 20 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 7.1~8.0 / 8 / 79 / 41 / 29 / 36; 8.1~10 / 10 / 89 / 47 / 35 / 40; 10.25~12 / 12 / 102 / 55 / 40 / 45; 12.25~14 / 14 / 107 / 60 / 43 / 45; 14.25~16 / 16 / 115 / 65 / 45 / 48; 16.50~18 / 18 / 123 / 73 / 51 / 48; 18.50~20 / 20 / 131 / 79 / 55 / 50
0307-757 | Curved cutting edge solid-carbide drills, 5D direction
Diameter range: 3–20 mm; Depth class: 5D nominal direction; actual listed maximum depth is size-specific; Coolant: Internal-coolant direction; Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units: 3~3.7 / 6 / 66 / 28 / 23 / 36; 4~4.65 / 6 / 74 / 36 / 29 / 36; 4.8~6 / 6 / 82 / 44 / 35 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 8.1~10 / 10 / 103 / 61 / 49 / 40; 10.25~12 / 12 / 118 / 71 / 56 / 45; 12.20~14 / 14 / 124 / 77 / 60 / 45; 14.25~16 / 16 / 133 / 83 / 63 / 48; 16.50~18 / 18 / 143 / 93 / 71 / 48; 18.50~20 / 20 / 153 / 101 / 77 / 50
0307-758 | Straight cutting edge solid-carbide drills, 3D direction
Diameter range: 3–20 mm; Depth class: 3D nominal direction; actual listed maximum depth is size-specific; Coolant: With/without coolant options; Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units: 3~3.7 / 6 / 62 / 20 / 14 / 36; 4.8~6 / 6 / 66 / 28 / 20 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 7.1~8.0 / 8 / 79 / 41 / 29 / 36; 8.1~10 / 10 / 89 / 47 / 35 / 40; 10.25~12 / 12 / 102 / 55 / 40 / 45; 12.25~14 / 14 / 107 / 60 / 43 / 45; 14.25~16 / 16 / 115 / 65 / 45 / 48; 16.50~18 / 18 / 123 / 73 / 51 / 48; 18.50~20 / 20 / 131 / 79 / 55 / 50
0307-759 | Straight cutting edge solid-carbide drills, 5D direction
Diameter range: 3–20 mm; Depth class: 5D nominal direction; actual listed maximum depth is size-specific; Coolant: With/without coolant options; Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units: 3~3.7 / 6 / 66 / 28 / 23 / 36; 4~4.65 / 6 / 74 / 36 / 29 / 36; 4.8~6 / 6 / 82 / 44 / 35 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 8.1~10 / 10 / 103 / 61 / 49 / 40; 10.25~12 / 12 / 118 / 71 / 56 / 45; 12.20~14 / 14 / 124 / 77 / 60 / 45; 14.25~16 / 16 / 133 / 83 / 63 / 48; 16.50~18 / 18 / 143 / 93 / 71 / 48; 18.50~20 / 20 / 153 / 101 / 77 / 50
0307-760 | AlTiN straight-edge carbide drills, 8D direction
Diameter range: 3–16 mm; Depth class: 8D nominal; confirm actual working depth; Diameter / shank / overall / flute / shank length — confirm drawing units: 3~3.7 / 6 / 72 / 34 / 36; 3.8~4.7 / 6 / 81 / 43 / 36; 4.8~6 / 6 / 95 / 57 / 36; 6.1~8 / 8 / 114 / 76 / 36; 8.1~10 / 10 / 142 / 95 / 40; 10.2~12 / 12 / 162 / 114 / 45; 12.1~14 / 14 / 182 / 133 / 45; 14.2~16 / 16 / 203 / 152 / 48
0307-761 | AlTiN straight-edge carbide drills, 12D direction
Diameter range: 3–20 mm; Depth class: 12D nominal; confirm actual working depth; Diameter / shank / overall / flute / shank length — confirm drawing units: 3~3.7 / 6 / 90 / 50 / 36; 3.8~4.7 / 6 / 102 / 64 / 36; 4.8~6 / 6 / 116 / 78 / 36; 6.1~8 / 8 / 146 / 108 / 36; 8.1~10 / 10 / 162 / 120 / 40; 10.2~12 / 12 / 204 / 156 / 45; 12.5~14 / 14 / 230 / 182 / 45; 14.5~16 / 16 / 260 / 208 / 48; 16.5~18 / 18 / 285 / 234 / 48; 18.5~20 / 16 / 310 / 258 / 50
0307-762 | Four-margin deep-hole carbide drills, 15D direction
Diameter range: 3–14 mm; Depth class: 15D nominal; the approved drawing and actual retained depth govern; Coolant: Internal coolant; Diameter / shank / overall / flute / shank length — confirm drawing units: 3 / 6 / 95 / 55 / 36; 3.17 / 6 / 106 / 67 / 36; 3.5~4 / 6 / 116 / 76 / 36; 4.37~5 / 6 / 133 / 93 / 36; 5.1~6 / 6 / 150 / 110 / 36; 6.35~7 / 8 / 167 / 127 / 36; 7.14~8 / 8 / 183 / 143 / 36; 8.33~9 / 10 / 204 / 160 / 40; 9.13~10 / 10 / 221 / 177 / 40; 10.32~11 / 12 / 247 / 198 / 45; 11.11~12 / 12 / 263 / 214 / 45; 12.3~14 / 14 / 297 / 248 / 45
0307-763 | Four-margin deep-hole carbide drills, 20D direction
Diameter range: 3–12 mm; Depth class: 20D nominal; the approved drawing and actual retained depth govern; Coolant: Internal coolant; Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units: 3 / 6 / 107 / 65 / 60 / 36; 3.175~4 / 6 / 134 / 92 / 86 / 36; 3.5~4 / 6 / 116 / 76 / 36 / 36; 4.5~5 / 6 / 158 / 118 / 110 / 36; 5.5 / 6 / 170 / 132 / 123 / 36; 5.556~6 / 6 / 182 / 144 / 135 / 36; 6.1~7 / 8 / 200 / 162 / 151 / 36; 7.144~8 / 8 / 222 / 184 / 172 / 36; 8.3~9 / 10 / 240 / 198 / 184 / 40; 9.525~10 / 10 / 262 / 220 / 205 / 40; 10.2~11 / 12 / 289 / 242 / 225 / 45; 11.113~12 / 12 / 311 / 264 / 246 / 45
0307-764 | Four-margin deep-hole carbide drills, 25D direction
Diameter range: 3–12 mm; Depth class: 25D nominal; the approved drawing and actual retained depth govern; Coolant: Internal coolant; Diameter / shank / overall / flute / shank length — confirm drawing units: 3 / 6 / 125 / 85 / 36; 3.1 / 6 / 141 / 101 / 36; 3.5~4 / 6 / 156 / 116 / 36; 4.2~5 / 6 / 183 / 143 / 36; 5.1~6 / 6 / 210 / 170 / 36; 6.3~7 / 8 / 237 / 197 / 36; 6.1~7 / 8 / 200 / 162 / 36; 7.14~8 / 8 / 263 / 223 / 36; 8.5~9 / 10 / 294 / 250 / 40; 10 / 10 / 321 / 277 / 40; 11 / 12 / 359 / 310 / 40; 12 / 12 / 386 / 337 / 40
0307-765 | Four-margin deep-hole carbide drills, 30D direction
Diameter range: 3–10 mm; Depth class: 30D nominal; the approved drawing and actual retained depth govern; Coolant: Internal coolant; Diameter / shank / overall / flute / shank length — confirm drawing units: 3 / 6 / 140 / 100 / 36; 3.1 / 6 / 158 / 118 / 36; 3.5~4 / 6 / 176 / 136 / 36; 4.2~5 / 6 / 208 / 168 / 36; 5.1~6 / 6 / 240 / 200 / 36; 6.3~7 / 8 / 272 / 232 / 36; 7.14~8 / 8 / 303 / 263 / 36; 8.5~9 / 10 / 339 / 295 / 40; 10 / 10 / 371 / 327 / 40
0307-766 | Four-margin deep-hole carbide drills, 40D direction
Diameter range: 3–8 mm; Depth class: 40D nominal; the approved drawing and actual retained depth govern; Coolant: Internal coolant; Diameter / shank / overall / flute / shank length — confirm drawing units: 3 / 6 / 170 / 130 / 36; 3.1~3.5 / 6 / 193 / 153 / 36; 3.8~4 / 6 / 216 / 176 / 36; 4.2~4.5 / 6 / 238 / 198 / 36; 4.76~5 / 6 / 258 / 218 / 36; 5.1~5.5 / 8 / 280 / 240 / 36; 5.56~6 / 8 / 300 / 260 / 36; 6.3~6.5 / 8 / 322 / 282 / 36; 7 / 8 / 342 / 302 / 36; 7.14~7.5 / 8 / 363 / 323 / 36; 8 / 8 / 383 / 343 / 36
0307-767 | Uncoated carbide drills for aluminium/copper
Diameter range: 3–20 mm; Depth class: 5D nominal direction; Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units: 3~3.7 / 6 / 66 / 28 / 23 / 36; 4~4.65 / 6 / 74 / 36 / 29 / 36; 4.8~6 / 6 / 82 / 44 / 35 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 8.1~10 / 10 / 103 / 61 / 49 / 40; 10.25~12 / 12 / 118 / 71 / 56 / 45; 12.20~14 / 14 / 124 / 77 / 60 / 45; 14.25~16 / 16 / 133 / 83 / 63 / 48; 16.5~18 / 18 / 143 / 93 / 71 / 48; 18.5~20 / 20 / 153 / 101 / 77 / 50
0307-768 | General straight-shank solid-carbide drills
Diameter range: 1–13 mm; Point-angle options: 118° or 135°; Helix angle: 30°; Diameter / flute length / overall length — confirm drawing units: 1 / 15 / 40; 7 / 40 / 65(80); 1.5 / 16 / 40; 7.5 / 40 / 80; 2 / 18 / 55; 8 / 40 / 80; 2.5 / 20 / 40; 8.5 / 40 / 80; 3 / 20 / 45; 9 / 40 / 80; 3.5 / 25 / 50; 9.5 / 40 / 80; 4 / 27 / 55; 10 / 50 / 100; 4.5 / 30 / 60; 10.5 / 50 / 100; 5 / 30 / 60; 11 / 50 / 100; 5.5 / 40 / 65(80); 11.5 / 50 / 100; 6 / 40 / 65(80); 12 / 50 / 100; 6.5 / 40 / 65(80); 12.5 / 50 / 100; 13 / 50 / 100
0307-769 | Long straight-shank carbide drills
Diameter range: 1–13 mm; Point-angle options: 118° or 135°; Helix angle: 30°
0307-770 | Extended straight-shank carbide drills
Diameter range: 1–13 mm; Point-angle options: 118° or 135°; Helix angle: 30°; Diameter / flute length / overall length — confirm drawing units: 1 / 16 / 50;  7 / 50 / 105(110);  1.5 / 24 / 50;  7.5 / 52 / 111(120);  2 / 24 / 55;  8 / 60 / 117(120);  2.5 / 26 / 61(65);  8.5 / 60 / 121(130);  3 / 30 / 71(75);  9 / 65 / 124(130);  3.5 / 35 / 73(75);  9.5 / 65 / 127(130);  4 / 40 / 83(90);  4.5 / 42 / 86(90);  10.5 / 70 / 137(150);  5 / 45 / 92(100);  11 / 70 / 140(150);  5.5 / 45 / 95(100);  11.5 / 70 / 143(150);  6 / 50 / 102(110);  12 / 70 / 149(150);  6.5 / 50 / 105(110);  12.5 / 70 / 149(150);  13 / 70 / 149(150)
0307-771 | Coated straight-shank carbide drills
Diameter range: 1–6 mm; Point-angle options: 118° or 135°; Helix angle: 30°; Diameter / flute length / overall length — confirm drawing units: 1 / 15 / 40; 1.5 / 16 / 40; 2 / 18 / 40; 2.5 / 20 / 40(45); 3 / 20 / 45; 3.5 / 25 / 50; 4 / 27 / 55; 4.5 / 30 / 60; 5 / 30 / 60; 5.5 / 40 / 80; 6 / 40 / 80
0307-772 | Replaceable-head carbide drills
Insert diameter range: 12–35.9 mm; Point angle: 140°; Nominal depth choices: 3D, 5D, 7D, 10D; actual geometry remains size-specific; Diameter range / shank / flange / depth / L1 / L2 / L3 / screw thread / drive — confirm drawing units: 12-12.9mm / 20 / 25 / 3D / 111 / 63 / 37.5 / M3.0 / T10; 12-12.9mm / 20 / 25 / 5D / 136 / 88 / 62.5 / M3.0 / T10; 12-12.9mm / 20 / 25 / 7D / 161 / 113 / 87.5 / M3.0 / T10; 12-12.9mm / 20 / 25 / 10D / 199 / 151 / 125 / M3.0 / T10; 13-13.9mm / 20 / 25 / 3D / 114 / 66 / 39 / M3.0 / T10; 13-13.9mm / 20 / 25 / 5D / 140 / 92 / 65 / M3.0 / T10; 13-13.9mm / 20 / 25 / 7D / 166 / 118 / 91 / M3.0 / T10; 13-13.9mm / 20 / 25 / 10D / 205 / 157 / 130 / M3.0 / T10; 14-14.9mm / 20 / 25 / 3D / 119 / 71 / 42 / M3.0 / T10; 14-14.9mm / 20 / 25 / 5D / 147 / 99 / 70 / M3.0 / T10; 14-14.9mm / 20 / 25 / 7D / 175 / 127 / 98 / M3.0 / T10; 14-14.9mm / 20 / 25 / 10D / 217 / 169 / 140 / M3.0 / T10; 15-15.9mm / 20 / 25 / 3D / 127 / 77 / 45 / M3.0 / T10; 15-15.9mm / 20 / 25 / 5D / 157 / 107 / 75 / M3.0 / T10; 15-15.9mm / 20 / 25 / 7D / 187 / 137 / 105 / M3.0 / T10; 15-15.9mm / 20 / 25 / 10D / 232 / 182 / 150 / M3.0 / T10; 16-16.9mm / 20 / 25 / 3D / 132 / 82 / 48 / M3.5 / T15; 16-16.9mm / 20 / 25 / 5D / 164 / 114 / 80 / M3.5 / T15; 16-16.9mm / 20 / 25 / 7D / 196 / 146 / 112 / M3.5 / T15; 16-16.9mm / 20 / 25 / 10D / 244 / 194 / 160 / M3.5 / T15; 17-17.9mm / 20 / 25 / 3D / 132 / 82 / 51 / M3.5 / T15; 17-17.9mm / 20 / 25 / 5D / 166 / 116 / 85 / M3.5 / T15; 17-17.9mm / 20 / 25 / 7D / 200 / 150 / 119 / M3.5 / T15; 17-17.9mm / 20 / 25 / 10D / 251 / 201 / 170 / M3.5 / T15; 18-18.9mm / 20 / 25 / 3D / 135 / 85 / 54 / M3.5 / T15; 18-18.9mm / 20 / 25 / 5D / 171 / 121 / 90 / M3.5 / T15; 18-18.9mm / 20 / 25 / 7D / 207 / 157 / 126 / M3.5 / T15; 18-18.9mm / 20 / 25 / 10D / 261 / 211 / 180 / M3.5 / T15; 19-19.9mm / 20 / 25 / 3D / 138 / 88 / 57 / M4.0 / T15; 19-19.9mm / 20 / 25 / 5D / 176 / 126 / 95 / M4.0 / T15; 19-19.9mm / 20 / 25 / 7D / 214 / 164 / 133 / M4.0 / T15; 19-19.9mm / 20 / 25 / 10D / 271 / 221 / 190 / M4.0 / T15; 20-20.9mm / 20 / 25 / 3D / 146 / 90 / 60 / M4.0 / T20; 20-20.9mm / 20 / 25 / 5D / 186 / 130 / 100 / M4.0 / T20; 20-20.9mm / 20 / 25 / 7D / 226 / 186 / 140 / M4.0 / T20; 20-20.9mm / 20 / 25 / 10D / 286 / 246 / 200 / M4.0 / T20; 21-21.9mm / 25 / 25 / 3D / 149 / 93 / 63 / M5.0 / T20; 21-21.9mm / 25 / 25 / 5D / 191 / 135 / 105 / M5.0 / T20; 21-21.9mm / 25 / 25 / 7D / 233 / 177 / 147 / M5.0 / T20; 21-21.9mm / 25 / 25 / 10D / 296 / 240 / 210 / M5.0 / T20; 22-22.9mm / 25 / 34 / 3D / 153 / 97 / 66 / M5.0 / T20; 22-22.9mm / 25 / 34 / 5D / 197 / 144 / 110 / M5.0 / T20; 22-22.9mm / 25 / 34 / 7D / 241 / 188 / 154 / M5.0 / T20; 22-22.9mm / 25 / 34 / 10D / 307 / 251 / 220 / M5.0 / T20; 23-23.9mm / 25 / 34 / 3D / 156 / 100 / 69 / M5.0 / T20; 23-23.9mm / 25 / 34 / 5D / 202 / 146 / 115 / M5.0 / T20; 23-23.9mm / 25 / 34 / 7D / 248 / 192 / 161 / M5.0 / T20; 23-23.9mm / 25 / 34 / 10D / 317 / 261 / 230 / M5.0 / T20; 24-24.9mm / 25 / 34 / 3D / 164 / 104 / 72 / M5.0 / T20; 24-24.9mm / 25 / 34 / 5D / 212 / 152 / 120 / M5.0 / T20; 24-24.9mm / 25 / 34 / 7D / 261 / 200 / 168 / M5.0 / T20; 24-24.9mm / 25 / 34 / 10D / 332 / 272 / 240 / M5.0 / T20; 25-25.9mm / 25 / 34 / 3D / 166 / 106 / 75 / M5.0 / T20; 25-25.9mm / 25 / 34 / 5D / 216 / 156 / 125 / M5.0 / T20; 25-25.9mm / 25 / 34 / 7D / 266 / 206 / 175 / M5.0 / T20; 25-25.9mm / 25 / 34 / 10D / 341 / 281 / 250 / M5.0 / T20; 26-26.9mm / 25 / 34 / 3D / 169 / 109 / 78 / M5.0 / T25; 26-26.9mm / 25 / 34 / 5D / 221 / 161 / 130 / M5.0 / T25; 26-26.9mm / 25 / 34 / 7D / 273 / 213 / 182 / M5.0 / T25; 26-26.9mm / 25 / 34 / 10D / 351 / 291 / 260 / M5.0 / T25; 27-27.9mm / 32 / 41 / 3D / 173 / 113 / 81 / M6.0 / T25; 27-27.9mm / 32 / 41 / 5D / 227 / 167 / 135 / M6.0 / T25; 27-27.9mm / 32 / 41 / 7D / 281 / 221 / 189 / M6.0 / T25; 27-27.9mm / 32 / 41 / 10D / 362 / 302 / 270 / M6.0 / T25; 28-28.9mm / 32 / 41 / 3D / 178 / 118 / 84 / M6.0 / T25; 28-28.9mm / 32 / 41 / 5D / 234 / 174 / 140 / M6.0 / T25; 28-28.9mm / 32 / 41 / 7D / 290 / 230 / 196 / M6.0 / T25; 28-28.9mm / 32 / 41 / 10D / 374 / 314 / 280 / M6.0 / T25; 29-29.9mm / 32 / 41 / 3D / 182 / 122 / 87 / M6.0 / T25; 29-29.9mm / 32 / 41 / 5D / 240 / 180 / 145 / M6.0 / T25; 29-29.9mm / 32 / 41 / 7D / 298 / 238 / 203 / M6.0 / T25; 29-29.9mm / 32 / 41 / 10D / 385 / 325 / 290 / M6.0 / T25; 30-30.9mm / 32 / 41 / 3D / 186 / 126 / 90 / M6.0 / T25; 30-30.9mm / 32 / 41 / 5D / 246 / 186 / 150 / M6.0 / T25; 30-30.9mm / 32 / 41 / 7D / 306 / 247 / 210 / M6.0 / T25; 30-30.9mm / 32 / 41 / 10D / 396 / 336 / 300 / M6.0 / T25; 31-31.9mm / 32 / 41 / 3D / 191 / 131 / 93 / M6.0 / T25; 31-31.9mm / 32 / 41 / 5D / 253 / 193 / 155 / M6.0 / T25; 31-31.9mm / 32 / 41 / 7D / 315 / 255 / 217 / M6.0 / T25; 31-31.9mm / 32 / 41 / 10D / 408 / 348 / 310 / M6.0 / T25; 32-32.9mm / 32 / 41 / 3D / 195 / 135 / 96 / M6.0 / T25; 32-32.9mm / 32 / 41 / 5D / 259 / 199 / 160 / M6.0 / T25; 32-32.9mm / 32 / 41 / 7D / 323 / 263 / 224 / M6.0 / T25; 32-32.9mm / 32 / 41 / 10D / 419 / 359 / 320 / M6.0 / T25; 33-33.9mm / 32 / 49 / 3D / 200 / 140 / 99 / M6.0 / T25; 33-33.9mm / 32 / 49 / 5D / 266 / 206 / 165 / M6.0 / T25; 33-33.9mm / 32 / 49 / 7D / 332 / 272 / 231 / M6.0 / T25; 33-33.9mm / 32 / 49 / 10D / 431 / 371 / 330 / M6.0 / T25; 34-34.9mm / 40 / 49 / 3D / 215 / 145 / 102 / M6.0 / T25; 34-34.9mm / 40 / 49 / 5D / 283 / 213 / 170 / M6.0 / T25; 34-34.9mm / 40 / 49 / 7D / 351 / 281 / 238 / M6.0 / T25; 34-34.9mm / 40 / 49 / 10D / 453 / 383 / 340 / M6.0 / T25; 35-35.9mm / 40 / 49 / 3D / 218 / 148 / 105 / M6.0 / T25; 35-35.9mm / 40 / 49 / 5D / 288 / 218 / 175 / M6.0 / T25; 35-35.9mm / 40 / 49 / 7D / 358 / 288 / 245 / M6.0 / T25; 35-35.9mm / 40 / 49 / 10D / 463 / 393 / 350 / M6.0 / T25
0307-773 | Straight-flute carbide drills without internal coolant
Diameter range: 4–20 mm; Construction: Uncoated text; conflicting coating icon held; Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units: 4~4.2 / 6 / 74 / 36 / 29 / 36; 5~6 / 6 / 82 / 44 / 35 / 36; 6.8~8 / 8 / 91 / 53 / 43 / 36; 8.5~10 / 10 / 103 / 61 / 49 / 40; 10.25~12 / 12 / 118 / 71 / 56 / 45; 13~14 / 14 / 124 / 77 / 60 / 45; 15~16 / 16 / 133 / 83 / 63 / 48; 17~18 / 18 / 143 / 93 / 71 / 48; 19.5~20 / 20 / 153 / 101 / 77 / 50
0307-774 | Straight-flute carbide drills with internal coolant
Diameter range: 4–20 mm; Construction: TiAlN-coated internal-coolant direction; Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units: 4~4.2 / 6 / 74 / 36 / 29 / 36; 5~6 / 6 / 82 / 44 / 35 / 36; 6.8~8 / 8 / 91 / 53 / 43 / 36; 8.5~10 / 10 / 103 / 61 / 49 / 40; 10.25~12 / 12 / 118 / 71 / 56 / 45; 13~14 / 14 / 124 / 77 / 60 / 45; 15~16 / 16 / 133 / 83 / 63 / 48; 17~18 / 18 / 143 / 93 / 71 / 48; 19.5~20 / 20 / 153 / 101 / 77 / 50
0307-775 | Straight-flute solid-carbide drilling tools
Diameter range: 2–14 mm; Flute options: 2 or 3; Rotation options: Left or right; Diameter / shank / cutting length / overall length — confirm drawing units: 2 / 2 / 10 / 38; 3 / 3 / 12 / 46; 4 / 4 / 17 / 55; 5 / 5 / 20 / 62; 6 / 6 / 21 / 66; 8 / 8 / 27 / 79; 10 / 10 / 31 / 89; 12 / 12 / 35 / 102; 14 / 14 / 37 / 107
0307-776 | Four-flute carbon-fibre carbide drills
Diameter range: 2–12.2 mm; Flutes: 4; Flutes / d1 / d2 / L1 / L2 — confirm drawing units: 4 / 2 / 2 / 15 / 150; 4 / 8.5 / 8.5 / 50 / 150; 4 / 4.2 / 4.2 / 20 / 150; 4 / 9.2 / 9.2 / 50 / 150; 4 / 10 / 10 / 50 / 150; 4 / 9.5 / 9.5 / 50 / 150; 4 / 11 / 11 / 50 / 150; 4 / 9.7 / 9.7 / 50 / 150; 4 / 11.7 / 11.7 / 50 / 150; 4 / 9.9 / 9.9 / 50 / 150; 4 / 5.2 / 5.2 / 20 / 150; 4 / 10.2 / 10.2 / 50 / 150; 4 / 5.8 / 5.8 / 20 / 150; 4 / 10.5 / 10.5 / 50 / 150; 4 / 6.5 / 6.5 / 20 / 150; 4 / 10.8 / 10.8 / 50 / 150; 4 / 7.2 / 7.2 / 20 / 150; 4 / 11.5 / 11.5 / 50 / 150; 4 / 7.5 / 7.5 / 20 / 150; 4 / 11.9 / 11.9 / 50 / 150; 4 / 7.9 / 7.9 / 50 / 150; 4 / 12 / 12 / 50 / 150; 4 / 8.2 / 8.2 / 50 / 150; 4 / 12.2 / 12.2 / 50 / 150
0307-777 | Undercut PCB microdrills
Diameter range: 0.25–1.2 mm; Drawing reference: Overall 38.20 / shank Ø3.175; confirm units and approved drawing; Diameter / flute length (mm): 0.25 / 4; 0.75 / 8.5; 0.3 / 5.5; 0.8 / 8.5; 0.35 / 6.5; 0.85 / 8.5; 0.4 / 7; 0.9 / 8.5; 0.45 / 7; 0.95 / 8.5; 0.5 / 8.5; 1 / 8.5; 0.55 / 8.5; 1.05 / 8.5; 0.6 / 8.5; 1.1 / 8.5; 0.65 / 8.5; 1.15 / 8.5; 0.7 / 8.5; 1.2 / 8.5
0307-778 | Standard PCB carbide microdrills
Diameter range: 0.1–3.175 mm; Drawing reference: Overall 38.20 / shank Ø3.175; confirm units and approved drawing; Diameter / flute length (mm): 0.1 / 1.2; 1.15 / 10.5; 2.2 / 10.5; 0.15 / 2; 1.2 / 10.5; 2.25 / 10.5; 0.2 / 3.5; 1.25 / 10.5; 2.3 / 10.5; 0.25 / 5; 1.3 / 10.5; 2.35 / 10.5; 0.3 / 5.5; 1.35 / 10.5; 2.4 / 10.5; 0.35 / 6.5; 1.4 / 10.5; 2.45 / 10.5; 0.4 / 7; 1.45 / 10.5; 2.5 / 10.5; 0.45 / 7; 1.5 / 10.5; 2.55 / 10.5; 0.5 / 8.5; 1.55 / 10.5; 2.6 / 10.5; 0.55 / 8.5; 1.6 / 10.5; 2.65 / 10.5; 0.6 / 9.5; 1.65 / 10.5; 2.7 / 10.5; 0.65 / 9.5; 1.7 / 10.5; 2.75 / 10.5; 0.7 / 9.5; 1.75 / 10.5; 2.8 / 10.5; 0.75 / 9.5; 1.8 / 10.5; 2.85 / 10.5; 0.8 / 9.5; 1.85 / 10.5; 2.9 / 10.5; 0.85 / 9.5; 1.9 / 10.5; 2.95 / 10.5; 0.9 / 9.5; 1.95 / 10.5; 3 / 10.5; 0.95 / 9.5; 2 / 10.5; 3.05 / 10.5; 1 / 10.5; 2.05 / 10.5; 3.1 / 10.5; 1.05 / 10.5; 2.1 / 10.5; 3.15 / 10.5; 1.1 / 10.5; 2.15 / 10.5; 3.175 / 10.5
0307-779 | Micro carbide slot drills
Diameter range: 0.5–2 mm; Drawing reference: Overall 38.20 / shank Ø3.175; confirm units and approved drawing; Diameter / flute length (mm): 0.5 / 5; 1.3 / 8.5; 0.55 / 5; 1.35 / 8.5; 0.6 / 7; 1.4 / 8.5; 0.65 / 7; 1.45 / 8.5; 0.7 / 8.5; 1.5 / 8.5; 0.75 / 8.5; 1.55 / 8.5; 0.8 / 8.5; 1.6 / 8.5; 0.85 / 8.5; 1.65 / 8.5; 0.9 / 8.5; 1.7 / 8.5; 0.95 / 8.5; 1.75 / 8.5; 1 / 8.5; 1.8 / 8.5; 1.05 / 8.5; 1.85 / 8.5; 1.1 / 8.5; 1.9 / 8.5; 1.15 / 8.5; 1.95 / 8.5; 1.2 / 8.5; 2 / 8.5
0307-780 | Two-step solid-carbide drills
Rotation: Left/right directions; Helix options: 30° or 40°; D1 / D2 / shank / FL1 / FL2 / overall — confirm drawing units: 3.3 / 4.5 / 6 / 11.4 / 28 / 66; 4.2 / 6 / 6 / 13.6 / 28 / 66; 5 / 7 / 8 / 16.5 / 41 / 79; 6.75 / 9.5 / 10 / 21 / 47 / 89; 8.5 / 12 / 12 / 25.5 / 55 / 102; 10.25 / 14 / 14 / 30 / 60 / 107
0307-781 | Twist-flute solid-carbide drills
Diameter range: 2–12 mm; Helix options: 20°, 30°, 45°; Diameter / shank / cutting length / overall — confirm drawing units: 2 / 2 / 12 / 38; 3 / 3 / 16 / 46; 4 / 4 / 22 / 55; 5 / 5 / 26 / 62; 6 / 6 / 28 / 66; 7 / 7 / 34 / 74; 8 / 8 / 37 / 79; 9 / 9 / 40 / 84; 10 / 10 / 43 / 89; 11 / 11 / 47 / 95; 12 / 12 / 51 / 102
0307-782 | Coated solid-carbide spotting drills
Diameter range: 5–20 mm; Point directions: 90° or 120°; Diameter / shank / overall / flute — confirm drawing units: 5 / 5 / 62 / 10; 6 / 6 / 66 / 15; 8 / 8 / 79 / 17; 10 / 10 / 89 / 20; 12 / 12 / 102 / 25; 14 / 14 / 107 / 30; 16 / 16 / 115 / 35; 20 / 20 / 131 / 40
0307-783 | Three-flute solid-carbide drills
Diameter range: 3–20 mm; Flutes: 3; Point reference: 150°; Diameter / shank / overall / flute / max cutting depth — confirm drawing units: 3 / 3 / 46 / 16 / 12; 3.1 / 3.1 / 49 / 18 / 14; 3.2 / 3.2 / 49 / 18 / 14; 3.3 / 3.3 / 49 / 18 / 14; 3.4 / 3.4 / 52 / 20 / 15; 3.5 / 3.5 / 52 / 20 / 15; 3.6 / 3.6 / 52 / 20 / 15; 3.7 / 3.7 / 52 / 20 / 15; 3.8 / 3.8 / 55 / 22 / 17; 4 / 4 / 55 / 22 / 17; 4.1 / 4.1 / 55 / 22 / 17; 4.2 / 4.2 / 55 / 22 / 17; 4.5 / 4.5 / 58 / 24 / 18; 4.8 / 4.8 / 62 / 26 / 20; 5 / 5 / 62 / 26 / 20; 5.1 / 5.1 / 62 / 26 / 20; 5.2 / 5.2 / 62 / 26 / 20; 5.3 / 5.3 / 62 / 26 / 20; 5.5 / 5.5 / 66 / 28 / 21; 5.8 / 5.8 / 66 / 28 / 21; 6 / 6 / 66 / 28 / 21; 6.1 / 6.1 / 70 / 31 / 23; 6.2 / 6.2 / 70 / 31 / 23; 6.4 / 6.4 / 70 / 31 / 23; 6.5 / 6.5 / 70 / 31 / 23; 6.7 / 6.7 / 70 / 31 / 23; 6.8 / 6.8 / 74 / 34 / 25; 7 / 7 / 74 / 34 / 25; 7.1 / 7.1 / 74 / 34 / 25; 7.4 / 7.4 / 74 / 34 / 25; 7.5 / 7.5 / 74 / 34 / 25; 7.8 / 7.8 / 79 / 37 / 27; 8 / 8 / 79 / 37 / 27; 8.1 / 8.1 / 79 / 37 / 27; 8.2 / 8.2 / 79 / 37 / 27; 8.4 / 8.4 / 79 / 37 / 27; 8.5 / 8.5 / 79 / 37 / 27; 8.6 / 8.6 / 84 / 40 / 29; 8.7 / 8.7 / 84 / 40 / 29; 8.8 / 8.8 / 84 / 40 / 29; 9 / 9 / 84 / 40 / 29; 9.5 / 9.5 / 84 / 40 / 29; 9.8 / 9.8 / 89 / 43 / 31; 10 / 10 / 89 / 43 / 31; 10.1 / 10.1 / 89 / 43 / 31; 10.2 / 10.2 / 89 / 43 / 31; 10.4 / 10.4 / 89 / 43 / 31; 10.5 / 10.5 / 89 / 43 / 31; 11 / 11 / 95 / 47 / 33; 12 / 12 / 102 / 51 / 35; 13 / 13 / 102 / 51 / 35; 14 / 14 / 107 / 54 / 37; 15 / 15 / 111 / 54 / 37; 17.5 / 17.5 / 123 / 62 / 40; 19.5 / 19.5 / 131 / 66 / 42; 20 / 20 / 131 / 66 / 42
0307-784 | General four-flute square carbide end mills
Material / construction: Submicron carbide, composite coating, passivated curved edge and positive-rake construction; Flutes: 4; Helix: 35°; Shank tolerance: h6; Diameter / cutting length / overall / shank / outer-diameter tolerance (mm): 1 / 3 / 50 / 4 / 0 to -0.015; 1.5 / 5 / 50 / 4 / 0 to -0.015; 2 / 6 / 50 / 4 / 0 to -0.015; 2.5 / 8 / 50 / 4 / 0 to -0.015; 3 / 9 / 50 / 4 / 0 to -0.015; 3.5 / 11 / 50 / 4 / 0 to -0.015; 4 / 12 / 50 / 4 / 0 to -0.015; 5 / 13 / 50 / 6 / 0 to -0.015; 6 / 15 / 50 / 6 / 0 to -0.015; 8 / 20 / 60 / 8 / 0 to -0.015; 10 / 25 / 75 / 10 / 0 to -0.015; 12 / 30 / 75 / 12 / 0 to -0.015; 14 / 35 / 100 / 14 / 0 to -0.025; 16 / 45 / 100 / 16 / 0 to -0.025; 18 / 50 / 100 / 18 / 0 to -0.025; 20 / 50 / 100 / 20 / 0 to -0.025
0307-785 | Extended general four-flute square end mills
Material / construction: Submicron carbide and composite coating; Flutes: 4; Helix: 35°; Shank tolerance: h6; Diameter / cutting length / overall / shank / outer-diameter tolerance (mm): 4 / 16 / 75 / 4 / 0 to -0.015; 6 / 25 / 75 / 6 / 0 to -0.015; 8 / 32 / 75 / 8 / 0 to -0.015; 8 / 32 / 100 / 8 / 0 to -0.015; 10 / 40 / 100 / 10 / 0 to -0.015; 12 / 60 / 150 / 12 / 0 to -0.015
0307-786 | General two-flute ball-nose carbide mills
Material / construction: Submicron carbide and composite coating; Flutes: 2; Helix: 30°; Shank tolerance: h6; Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm): 1 / 2 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 1.5 / 3 / 0.75 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2 / 4 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2.5 / 5 / 1.25 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 6 / 1.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 8 / 2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 10 / 2.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 14 / 28 / 7 / 14 / 100 / 0 to -0.020 / 0 to -0.030; 16 / 32 / 8 / 16 / 100 / 0 to -0.020 / 0 to -0.030
0307-787 | Extended general ball-nose carbide mills
Material / construction: Ultra-fine carbide and composite coating; Flutes: 2; Helix: 30°; Shank tolerance: h6; Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm): 4 / 8 / 2 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 150 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 150 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 150 / 0 to -0.015 / 0 to -0.020
0307-788 | General corner-radius carbide mills
Material / construction: Submicron carbide and composite coating; Flutes: 4; Helix: 35°; Shank tolerance: h6; Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm): 1 / 3 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 1.5 / 4 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2 / 6 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2 / 6 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 8 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 12 / 0.2 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 12 / 0.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 12 / 1 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 16 / 0.2 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 16 / 0.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 16 / 1 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.2 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.5 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 1 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 0.5 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 1 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 0.5 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 1 / 12 / 75 / 0 to -0.015 / 0 to -0.020
0307-789 | Extended general corner-radius mills
Material / construction: Submicron carbide and composite coating; Flutes: 4; Helix: 35°; Shank tolerance: h6; Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm): 4 / 10 / 0.5 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 1 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 16 / 0.5 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 16 / 1 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.5 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 1 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 4 / 11 / 0.5 / 4 / 100 / 0 to -0.015 / 0 to -0.020; 6 / 16 / 0.5 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 6 / 16 / 1 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.5 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 1 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 0.5 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 1 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 0.5 / 12 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 1 / 12 / 100 / 0 to -0.015 / 0 to -0.020
0307-790 | Variable-pitch four-flute square carbide mills
Material / construction: Ultra-fine carbide, passivated curved edge, unequal spacing and composite coating; Flutes: 4; Helix: 45°; Shank tolerance: h6; Diameter / cutting length / overall / shank / outer-diameter tolerance (mm): 1 / 3 / 50 / 4 / 0 to -0.015; 1.5 / 5 / 50 / 4 / 0 to -0.015; 2 / 6 / 50 / 4 / 0 to -0.015; 2.5 / 8 / 50 / 4 / 0 to -0.015; 3 / 9 / 50 / 4 / 0 to -0.015; 3.5 / 11 / 50 / 4 / 0 to -0.015; 4 / 12 / 50 / 4 / 0 to -0.015; 5 / 13 / 50 / 6 / 0 to -0.015; 6 / 15 / 50 / 6 / 0 to -0.015; 8 / 20 / 60 / 8 / 0 to -0.015; 10 / 25 / 75 / 10 / 0 to -0.015; 12 / 30 / 75 / 12 / 0 to -0.015; 14 / 35 / 100 / 14 / 0 to -0.020; 16 / 45 / 100 / 16 / 0 to -0.020
0307-791 | Extended variable-pitch square carbide mills
Material / construction: Ultra-fine carbide, unequal spacing and composite coating; Flutes: 4; Helix: 45°; Shank tolerance: h6; Diameter / cutting length / overall / shank / outer-diameter tolerance (mm): 4 / 16 / 75 / 4 / 0 to -0.015; 4 / 20 / 100 / 4 / 0 to -0.015; 5 / 20 / 75 / 6 / 0 to -0.015; 6 / 25 / 75 / 6 / 0 to -0.015; 6 / 30 / 100 / 6 / 0 to -0.015; 8 / 32 / 75 / 8 / 0 to -0.015; 8 / 32 / 100 / 8 / 0 to -0.015; 10 / 40 / 100 / 10 / 0 to -0.015; 10 / 50 / 150 / 10 / 0 to -0.015; 12 / 50 / 100 / 12 / 0 to -0.015; 12 / 60 / 150 / 12 / 0 to -0.015
0307-792 | Ultra-fine-carbide two-flute ball mills
Material / construction: Ultra-fine carbide and composite coating; Flutes: 2; Helix: 30°; Shank tolerance: h6; Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm): 1 / 2 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 1.5 / 3 / 0.75 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2 / 4 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2.5 / 5 / 1.25 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 6 / 1.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 8 / 2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 10 / 2.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 14 / 28 / 7 / 14 / 100 / 0 to -0.020 / 0 to -0.030; 16 / 32 / 8 / 16 / 100 / 0 to -0.020 / 0 to -0.030
0307-793 | Extended ultra-fine-carbide ball mills
Material / construction: Ultra-fine carbide and composite coating; Flutes: 2; Helix: 30°; Shank tolerance: h6; Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm): 4 / 8 / 2 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 150 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 150 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 150 / 0 to -0.015 / 0 to -0.020
0307-794 | Ultra-fine-carbide corner-radius mills
Material / construction: Ultra-fine carbide and composite coating; Flutes: 4; Helix: 45°; Shank tolerance: h6; Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm): 1 / 3 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 1.5 / 4 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2 / 5 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2.5 / 7 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2.5 / 7 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 8 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 8 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 8 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 13 / 0.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 13 / 1 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 0.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 1 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.5 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 1 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 0.5 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 1 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 0.5 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 1 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 16 / 45 / 0.5 / 16 / 100 / 0 to -0.020 / 0 to -0.030
0307-795 | Extended ultra-fine-carbide radius mills
Material / construction: Ultra-fine carbide and composite coating; Flutes: 4; Helix: 45°; Shank tolerance: h6; Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm): 4 / 10 / 0.5 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 4 / 20 / 0.5 / 4 / 100 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 1 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 4 / 20 / 1 / 4 / 100 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 0.5 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 24 / 0.5 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 1 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 24 / 1 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.5 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 32 / 0.5 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 1 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 32 / 1 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 0.5 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 1 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 0.5 / 12 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 1 / 12 / 100 / 0 to -0.015 / 0 to -0.020
0307-796 | Three-flute aluminium square mills
Material / construction: Submicron carbide, large chip pockets and polished/passivated edges; no coating shown; Flutes: 3; Helix: 45°; Shank tolerance: h6; Diameter / cutting length / overall / shank / outer-diameter tolerance (mm): 1 / 3 / 50 / 4 / 0 to -0.015; 1.5 / 4.5 / 50 / 4 / 0 to -0.015; 2 / 6 / 50 / 4 / 0 to -0.015; 2.5 / 7.5 / 50 / 4 / 0 to -0.015; 3 / 9 / 50 / 3 / 0 to -0.015; 3 / 9 / 50 / 4 / 0 to -0.015; 3.5 / 10.5 / 50 / 4 / 0 to -0.015; 4 / 12 / 50 / 4 / 0 to -0.015; 5 / 15 / 50 / 5 / 0 to -0.015; 5 / 15 / 50 / 6 / 0 to -0.015; 6 / 18 / 50 / 6 / 0 to -0.015; 8 / 24 / 60 / 8 / 0 to -0.015; 10 / 30 / 75 / 10 / 0 to -0.015; 12 / 36 / 75 / 12 / 0 to -0.015; 14 / 45 / 100 / 14 / 0 to -0.020; 16 / 50 / 100 / 16 / 0 to -0.020
0307-797 | Extended three-flute aluminium mills
Material / construction: Submicron carbide with large chip pockets and polished edge direction; Flutes: 3; Helix: 45°; Shank tolerance: h6; Diameter / cutting length / overall / shank / outer-diameter tolerance (mm): 3 / 12 / 75 / 3 / 0 to -0.015; 4 / 15 / 75 / 4 / 0 to -0.015; 6 / 20 / 75 / 6 / 0 to -0.015; 8 / 25 / 75 / 8 / 0 to -0.015; 4 / 16 / 100 / 4 / 0 to -0.015; 6 / 25 / 100 / 6 / 0 to -0.015; 8 / 32 / 100 / 8 / 0 to -0.015; 10 / 45 / 100 / 10 / 0 to -0.020; 12 / 55 / 100 / 12 / 0 to -0.020
0307-798 | Four-flute carbide square mills for hardened workpieces
Material / construction: Super-micrograin carbide, treated cutting edge and nano-layer coating; Flutes: 4; Helix: 45°; Shank tolerance: h6; Diameter / cutting length / overall / shank / outer-diameter tolerance (mm): 1 / 3 / 50 / 4 / 0 to -0.015; 1.5 / 4 / 50 / 4 / 0 to -0.015; 2 / 6 / 50 / 4 / 0 to -0.015; 2.5 / 8 / 50 / 4 / 0 to -0.015; 3 / 8 / 50 / 4 / 0 to -0.015; 3.5 / 10 / 50 / 4 / 0 to -0.015; 4 / 11 / 50 / 4 / 0 to -0.015; 5 / 13 / 50 / 6 / 0 to -0.015; 6 / 16 / 50 / 6 / 0 to -0.015; 8 / 20 / 60 / 8 / 0 to -0.015; 10 / 25 / 75 / 10 / 0 to -0.015; 12 / 30 / 75 / 12 / 0 to -0.015; 14 / 35 / 100 / 14 / 0 to -0.020; 16 / 45 / 100 / 16 / 0 to -0.020
0307-799 | Extended carbide square mills for hardened workpieces
Material / construction: Super-micrograin carbide and nano-layer coating; Flutes: 4; Helix: 45°; Shank tolerance: h6; Diameter / cutting length / overall / shank / outer-diameter tolerance (mm): 4 / 16 / 75 / 4 / 0 to -0.015; 4 / 20 / 100 / 4 / 0 to -0.015; 5 / 20 / 75 / 6 / 0 to -0.015; 6 / 25 / 75 / 6 / 0 to -0.015; 6 / 30 / 100 / 6 / 0 to -0.015; 8 / 32 / 75 / 8 / 0 to -0.015; 8 / 32 / 100 / 8 / 0 to -0.015; 10 / 40 / 100 / 10 / 0 to -0.015; 10 / 50 / 150 / 10 / 0 to -0.015; 12 / 50 / 100 / 12 / 0 to -0.015; 12 / 60 / 150 / 12 / 0 to -0.015
0307-800 | Two-flute carbide ball mills for hardened workpieces
Material / construction: Super-micrograin carbide and nano-layer coating; Flutes: 2; Helix: 35°; Shank tolerance: h6; Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm): 1 / 2 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 1.5 / 3 / 0.75 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2 / 4 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2.5 / 5 / 1.25 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 6 / 1.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 8 / 2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 10 / 2.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 14 / 28 / 7 / 14 / 100 / 0 to -0.020 / 0 to -0.030; 16 / 32 / 8 / 16 / 100 / 0 to -0.020 / 0 to -0.030
0307-801 | Extended carbide ball mills for hardened workpieces
Material / construction: Super-micrograin carbide and nano-layer coating; Flutes: 2; Helix: 35°; Shank tolerance: h6; Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm): 4 / 8 / 2 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 150 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 150 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 150 / 0 to -0.015 / 0 to -0.020
0307-802 | Carbide radius mills for hardened workpieces
Material / construction: Super-micrograin carbide and nano-layer coating; Flutes: 4; Helix: 45°; Shank tolerance: h6; Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm): 1 / 3 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 1.5 / 4 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2 / 5 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2.5 / 7 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2.5 / 7 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 8 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 8 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 8 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 13 / 0.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 13 / 1 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 0.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 1 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.5 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 1 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 0.5 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 1 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 0.5 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 1 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 16 / 45 / 0.5 / 16 / 100 / 0 to -0.020 / 0 to -0.030
0307-803 | Extended carbide radius mills for hardened workpieces
Material / construction: Super-micrograin carbide and nano-layer coating; Flutes: 4; Helix: 45°; Shank tolerance: h6; Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm): 4 / 10 / 0.5 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 4 / 20 / 0.5 / 4 / 100 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 1 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 4 / 20 / 1 / 4 / 100 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 0.5 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 24 / 0.5 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 1 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 24 / 1 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.5 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 32 / 0.5 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 1 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 32 / 1 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 0.5 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 1 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 0.5 / 12 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 1 / 12 / 100 / 0 to -0.015 / 0 to -0.020
0307-804 | General solid-carbide drills without internal coolant
Diameter: 3–20 mm; Depth classes: 3D, 5D, 8D, 12D; Point angle: 140°; Diameter / shank tolerances: m7 / h6; Geometry references: DIN 6537 and DIN 6535; confirm the ordered form
0307-805 | Indexable carbide-head drilling systems
Standard head diameter: 16–32 mm; Non-standard diameter direction: 12.5–42 mm, drawing approval required; Nominal length classes: 3D, 5D, 7D, 8D, 10D, 12D; Point angle: 140°
0307-806 | U-drills, deep-hole holders and matching accessories
Working-depth classes: 2D, 3D, 4D, 5D; Deep-hole classes: 5D, 6.5D, 8D; Universal holder classes: 2.25D, 3.25D; 2.5D, 3.5D
0307-807 | Cobalt-HSS and powder-metal end mills
Diameter: 1–25 mm; Flute choices: 2, 3 or 4; Substrate directions: Cobalt-bearing HSS and powder-metal HSS; Custom geometry: Workpiece-specific drawing review
0307-808 | Multi-flute ball-nose carbide mills
Diameter: 1–20 mm; Flutes: 2 or 4; Diameter tolerance: 0 to -0.018 mm; Shank tolerance: h6; Helix: 45°
0307-809 | Tapered ball-nose carbide mills
Diameter: 4–10 mm; Flutes: 2 or 4; Diameter tolerance: 0 to -0.018 mm; Shank tolerance: h6
0307-810 | Multi-flute flat-end carbide mills
Diameter: 1–20 mm; Flutes: 2 or 4; Diameter tolerance: 0 to -0.018 mm; Shank tolerance: h6
0307-811 | Corner-nose carbide mills
Diameter: 1–20 mm; Flutes: 2 or 4; Diameter tolerance: 0 to -0.018 mm; Shank tolerance: h6
0307-812 | Multi-edge roughing carbide mills
Diameter: 4–32 mm; Flutes: 5, 6 or 8; Diameter tolerance: 0 to -0.018 mm; Shank tolerance: h6
0307-813 | Micro-diameter carbide mills
Diameter: 0.2–0.9 mm; Flutes: 2; Diameter tolerance: 0 to -0.018 mm; Shank tolerance: h6; Helix: 35°; End directions: Protected end or ball nose
0307-814 | Solid-carbide forming taps with internal coolant
Thread endpoints: M4×0.7–M30×2 (metric designation); Tolerance direction: 6HX; Coolant direction: Internal coolant; Configuration: Extended-shank and special chamfer options by approved drawing
0307-815 | Solid-carbide forming taps
Thread endpoints: M0.8×0.2–M32×2.5 (metric designation); Tolerance direction: 6H; Coolant direction: No internal-coolant feature specified; Configuration: Extended-shank and special chamfer options by approved drawing
0307-816 | Solid-carbide spiral-flute cutting taps with internal coolant
Thread endpoints: M4×0.7–M30×3.5 (metric designation); Tolerance direction: 6HX; Coolant direction: Internal coolant; Configuration: Extended-shank and special chamfer options by approved drawing
0307-817 | Solid-carbide spiral-flute cutting taps
Thread endpoints: M4×0.7–M30×3.5 (metric designation); Tolerance direction: 6HX; Coolant direction: No internal-coolant feature specified; Configuration: Extended-shank and special chamfer options by approved drawing
0307-818 | Solid-carbide straight-flute cutting taps with internal coolant
Thread endpoints: M5×0.8–M30×3.5 (metric designation); Tolerance direction: 6HX; Coolant direction: Internal coolant; Configuration: Extended-shank and special chamfer options by approved drawing
0307-819 | Solid-carbide straight-flute cutting taps
Thread endpoints: M5×0.8–M30×3.5 (metric designation); Tolerance direction: 6HX; Coolant direction: No internal-coolant feature specified; Configuration: Extended-shank and special chamfer options by approved drawing
0307-820 | Solid-carbide thread mills
Nominal thread range: M0.6–M30; Profile angle: 60°
0307-821 | Large HSS round and hexagonal dies
Metric thread range: M8–M66
0307-822 | Left-helix solid-carbide reamers
Diameter: 3–16 mm; Flutes: 6; Helix: 7°; Cutting diameter / shank tolerances: h7 / h6
0307-823 | Right-helix solid-carbide reamers
Diameter: 3–16 mm; Flutes: 6; Helix: 7°; Cutting diameter / shank tolerances: h7 / h6
0307-824 | Threaded-interface carbide drills
Diameter: 3.18–10.72 mm; Interface: 1/4-28 UNF; Diameter tolerance: h7; Point-angle icon: 135°
0307-825 | Threaded-interface carbide reamers
Diameter: 3.18–10.72 mm; Interface: 1/4-28 UNF; Diameter tolerance: h7
0307-826 | Solid-carbide two-flute countersinks
Cutting diameter: 11.1–25.4 mm; Flutes: 2; Interface: 1/4-28 UNF
0307-827 | PCD two-flute countersinks
Cutting diameter: 11.1–25.4 mm; Flutes: 2; Interface: 1/4-28 UNF
0307-828 | Diamond-coated fine-tooth carbide routers
Diameter: 4–12 mm; Shank tolerance: h6
0307-829 | Carbide rotary cutting heads for composite profiling
Diameter: 12.7–76.2 mm; Shank tolerance: h6
0307-830 | Straight-flute carbide bits for carbon-fibre composites
Diameter: 2.49–12.7 mm; Flutes: 2
0307-831 | Tapered-flute carbide bits for carbon-fibre composites
Diameter: 2.49–12.7 mm; Flutes: 2
0307-832 | Coated carbide and cermet cold-saw blades
Diameter: 250–730 mm; Construction directions: Cermet/black-coated; carbide-coated; Customization: Workpiece-specific tooth and blade geometry by drawing
0307-833 | Cermet-tooth manual cold-saw blades
Diameter: 255–405 mm
0307-834 | Solid-carbide slitting saws
Diameter: 5–160 mm; Tooth-form directions: Three distinct illustrated profiles; confirm drawing
0307-835 | Custom aluminium step-forming finishing cutters
Configuration: Non-standard stepped form by drawing
0307-836 | CVD-coated carbide inserts for steel finishing
Substrate / coating: Gradient carbide / Al2O3 and MT-TiCN
0307-837 | CVD-coated inserts for cast iron
Substrate / coating: Micrograin carbide / MT-TiCN and Al2O3
0307-838 | PVD-coated inserts for stainless steel
Substrate / coating: High-cobalt micrograin carbide / TiAlN
0307-839 | Parting and grooving insert systems
General groove width: 2–8 mm; Precision groove width: 3–6 mm
0307-840 | Internal and external threading inserts
ISO metric 60° pitch: 1–5 mm; Partial 60° pitch: 0.5–5 mm; Partial 55° pitch: 5–48 TPI; UN: 8–24 TPI; Whitworth: 11–19 TPI; NPT: 8–27 TPI; BSPT: 11–28 TPI; Round profile, DIN 405: 4–10 TPI
0307-841 | Rough-turning carbide insert profiles
Profiles: Square, diamond, triangular and trigon directions; exact geometry by holder/drawing
0307-842 | PCBN and PCD turning insert directions
Materials: PCBN or PCD; Geometry directions: Positive and negative
0307-843 | PVD coating coordination for cutting tools, dies and components
Coating chemistry directions: TiN, TiAlN, carbon-based, silicon-based and AlCr-based; Layer directions: Monolayer, top-treated and multilayer; Colour directions: Gold, blue-black, grey, copper or black, depending on chemistry; Thickness examples: TiN/TiAlN 2–3 µm; carbon multilayer 1.5 µm; silicon multilayer 1.5–3 µm; AlCr-based 1.5–4 µm; DLC 1–3 or 3–5 µm; TiAlN-based multilayer 1.5–3 µm — confirm selected process
0307-844 | Small positive diamond turning insert geometry choices
l / t / r (mm) — individual drawing combinations: 6 / 2.38 / 0.4; 9.2 / 3.97 / 0.4; 7.3 / 2.38 / 0.4; 11.2 / 3.97 / 0.4
0307-845 | Negative diamond and square turning insert geometry choices
l / t / r (mm) — individual drawing combinations: 12.4 / 4.76 / 0.4; 12.3 / 4.76 / 0.4; 12.3 / 4.76 / 0.8
0307-846 | Triangular turning insert geometry choices
l / t / r (mm) — individual drawing combinations: 15.5 / 4.76 / 0.4; 14.5 / 4.76 / 0.8; 9.52 / 2.38 / 0.4; 9.52 / 2.38 / 0.8
0307-847 | Acute diamond turning insert geometry choices
l / t / r (mm) — individual drawing combinations: 15.6 / 4.76 / 0.4; 14.3 / 4.76 / 0.8
0307-848 | Trigon turning insert geometry choices
l / t / r (mm) — individual drawing combinations: 8.4 / 4.76 / 0.4; 8.3 / 4.76 / 0.4; 8.3 / 4.76 / 0.8
0307-849 | Narrow parting and grooving insert geometry choices
l / t / r (mm) — individual drawing combinations: 16 / 3.5 / 0.2; 21 / 4.8 / 0.4; 26 / 5.8 / 0.8; 16 / 3.5 / 0.15; 16 / 3.85 / 0.2
0307-850 | Positive diamond finishing insert geometry choices
l / t / r (mm) — individual drawing combinations: 6.35 / 2.38 / 0.2; 6.35 / 2.38 / 0.4; 9.52 / 3.97 / 0.2; 9.52 / 3.97 / 0.4; 9.52 / 3.97 / 0.8
0307-851 | Diamond and square turning insert geometry choices
l / t / r (mm) — individual drawing combinations: 9.52 / 4.76 / 0.8; 12.7 / 4.76 / 0.4; 12.7 / 4.76 / 0.8
0307-852 | Acute diamond finishing insert geometry choices
l / t / r (mm) — individual drawing combinations: 9.52 / 4.76 / 0.8
0307-853 | Diamond and positive triangle turning insert geometry choices
l / t / r (mm) — individual drawing combinations: 12.7 / 4.76 / 0.4; 5.56 / 4.76 / 0.4; 6.35 / 4.76 / 0.4
0307-854 | Triangular turning with handed profiles insert geometry choices
l / t / r (mm) — individual drawing combinations: 9.52 / 4.76 / 0.8; 9.52 / 4.76 / 0.4
0307-855 | Acute diamond and trigon turning insert geometry choices
l / t / r (mm) — individual drawing combinations: 9.52 / 4.76 / 0.4; 12.7 / 4.76 / 0.8
0307-856 | Positive rectangular milling insert geometry choices
l / di / t / d1 / r (mm) — individual drawing combinations: 11.22 / 6.2 / 3.5 / 2.8 / 0.8; 17.27 / 9.3 / 4.76 / 4.4 / 0.8
0307-857 | Rectangular milling with alternative profiles insert geometry choices
l / di / t / d1 / r (mm) — individual drawing combinations: 17.25 / 9.23 / 4.76 / 4.4 / 0.8; 17.21 / 9.26 / 4.76 / 4.4 / 0.8
0307-858 | Round milling insert geometry choices
l / di / t / d1 (mm) — individual drawing combinations: 10 / 10 / 3.18 / 4.6; 10 / 10 / 3.97 / 4.4; 12 / 12 / 4.76 / 4.4
0307-859 | Round milling insert geometry choices
l / di / t / d1 (mm) — individual drawing combinations: 12 / 12 / 4.46 / 4.4; 16 / 16 / 5.56 / 5.5
0307-860 | Rounded-square milling insert geometry choices
l / di / t / d1 / r (mm) — individual drawing combinations: 15 / 12.7 / 5.56 / 4.4 / 1.2; 15 / 15.587 / 5.56 / 5.5 / 1.2; 15 / 15.578 / 5.56 / 5.5 / 1.2
0307-861 | Small positive diamond turning insert geometry choices
l / di / t / d1 / r (mm) — individual drawing combinations: 6.4 / 6.35 / 2.38 / 2.8 / 0.8
0307-862 | Positive diamond and rhombic turning insert geometry choices
l / di / t / d1 / r (mm) — individual drawing combinations: 9.7 / 9.525 / 3.97 / 4.4 / 0.4; 9.7 / 9.525 / 3.97 / 4.4 / 0.8; 12.9 / 12.7 / 4.76 / 5.56 / 0.4
0307-863 | Positive rhombic turning insert geometry choices
l / di / t / d1 / r (mm) — individual drawing combinations: 12.9 / 12.7 / 4.76 / 5.56 / 0.4; 12.9 / 12.7 / 4.76 / 5.16 / 0.4; 7.8 / 6.35 / 2.38 / 2.8 / 0.4
0307-864 | Acute diamond and triangular turning insert geometry choices
l / di / t / d1 / r (mm) — individual drawing combinations: 11.6 / 9.525 / 3.97 / 4.4 / 0.4; 16.5 / 9.525 / 3.97 / 4.4 / 0.8; 16.5 / 9.525 / 4.76 / 3.81 / 0.8
0307-865 | Acute diamond and trigon turning insert geometry choices
l / di / t / d1 / r (mm) — individual drawing combinations: 16.5 / 9.525 / 4.76 / 4.4 / 0.8; 8.7 / 12.7 / 4.76 / 5.16 / 0.4
0307-866 | Square milling insert geometry choices
l / di / t / d1 / r (mm) — individual drawing combinations: 4 / 4 / 2.38 / 2.2 / 0.4; 5 / 5 / 2.38 / 2.25 / 0.4; 6 / 6 / 2.38 / 2.61 / 0.4; 7.94 / 7.94 / 3.97 / 2.85 / 0.8; 9.8 / 9.8 / 4.3 / 4.05 / 0.8; 11.5 / 11.5 / 4.8 / 4.45 / 0.8; 14.3 / 14.3 / 5.2 / 5.75 / 1.2
0307-867 | Trigon milling insert geometry choices
l / di / t / d1 / r (mm) — individual drawing combinations: 3.8 / 5.56 / 2.38 / 2.8 / 0.8; 4.3 / 6.35 / 2.38 / 3.1 / 0.8; 5.4 / 7.94 / 3.18 / 3.2 / 0.8; 6.5 / 9.525 / 3.97 / 3.7 / 0.8; 8.7 / 12.7 / 4.76 / 4.3 / 1.2
0307-868 | Double-layer coated inserts on a high-cobalt fine-grain substrate
Construction: Double-layer coating; high-cobalt fine-particle carbide substrate
0307-869 | DIN371/376 thread-point or spiral-flute HSSE taps for wear-resistant/alloy steel
Stated thread scope: M3–M12; Identification ring: Blue; Substrate: HSSE; Surface direction: Bright or TiCN; Thread / pitch / overall L1 / straight-point thread length / spiral thread length / shank d1 / square a — dimensions subject to approved drawing/units: M3 × 0.5 / 0.5 / 56 / 11 / 6 / 3.5 / 2.7; M4 × 0.7 / 0.7 / 63 / 13 / 7 / 4.5 / 3.4; M5 × 0.8 / 0.8 / 70 / 16 / 8 / 6 / 4.9; M6 × 1.0 / 1 / 80 / 19 / 10 / 6 / 4.9; M8 × 1.25 / 1.25 / 90 / 22 / 14 / 8 / 6.2; M10 × 1.5 / 1.5 / 100 / 24 / 16 / 10 / 8; M12 × 1.75 / 1.75 / 110 / 29 / 18 / 9 / 7
0307-870 | DIN371/376 straight-flute HSSE taps for die steel
Stated thread scope: M3–M12; Identification ring: Red; Substrate: HSSE; Surface direction: Bright or TiCN; Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units: M3 × 0.5 / 0.5 / 56 / 11 / 3.5 / 2.7; M4 × 0.7 / 0.7 / 63 / 13 / 4.5 / 3.4; M5 × 0.8 / 0.8 / 70 / 16 / 6 / 4.9; M6 × 1.0 / 1 / 80 / 19 / 6 / 4.9; M8 × 1.25 / 1.25 / 90 / 22 / 8 / 6.2; M10 × 1.5 / 1.5 / 100 / 24 / 10 / 8; M12 × 1.75 / 1.75 / 110 / 29 / 9 / 7
0307-871 | DIN371/376 spiral-flute HSSE taps for aluminium
Stated thread scope: M3–M12; Identification ring: Yellow; Substrate: HSSE; Surface direction: Bright or TiCN; Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units: M3 × 0.5 / 0.5 / 56 / 6 / 3.5 / 2.7; M4 × 0.7 / 0.7 / 63 / 7 / 4.5 / 3.4; M5 × 0.8 / 0.8 / 70 / 8 / 6 / 4.9; M6 × 1.0 / 1 / 80 / 10 / 6 / 4.9; M8 × 1.25 / 1.25 / 90 / 14 / 8 / 6.2; M10 × 1.5 / 1.5 / 100 / 16 / 10 / 8; M12 × 1.75 / 1.75 / 110 / 18 / 9 / 7
0307-872 | DIN371/376 thread-point or spiral-flute HSSE taps for general workpiece selection
Stated thread scope: M3–M12; Identification ring: Green; Substrate: HSSE; Surface direction: Bright or TiN; Thread / pitch / overall L1 / straight-point thread length / spiral thread length / shank d1 / square a — dimensions subject to approved drawing/units: M3 × 0.5 / 0.5 / 56 / 11 / 6 / 3.5 / 2.7; M4 × 0.7 / 0.7 / 63 / 13 / 7 / 4.5 / 3.4; M5 × 0.8 / 0.8 / 70 / 16 / 8 / 6 / 4.9; M6 × 1.0 / 1 / 80 / 19 / 10 / 6 / 4.9; M8 × 1.25 / 1.25 / 90 / 22 / 14 / 8 / 6.2; M10 × 1.5 / 1.5 / 100 / 24 / 16 / 10 / 8; M12 × 1.75 / 1.75 / 110 / 29 / 18 / 9 / 7
0307-873 | DIN371/376 straight-flute HSSE taps for brass
Stated thread scope: M3–M12; Identification ring: Orange; Substrate: HSSE; Surface direction: Bright or TiCN; Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units: M3 × 0.5 / 0.5 / 56 / 11 / 3.5 / 2.7; M4 × 0.7 / 0.7 / 63 / 13 / 4.5 / 3.4; M5 × 0.8 / 0.8 / 70 / 16 / 6 / 4.9; M6 × 1.0 / 1 / 80 / 19 / 6 / 4.9; M8 × 1.25 / 1.25 / 90 / 22 / 8 / 6.2; M10 × 1.5 / 1.5 / 100 / 24 / 10 / 8; M12 × 1.75 / 1.75 / 110 / 29 / 9 / 7
0307-874 | DIN371/376 straight-flute HSSE taps for cast steel
Stated thread scope: M3–M12; Identification ring: Black; Substrate: HSSE; Surface direction: Oxynitride; Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units: M3 × 0.5 / 0.5 / 56 / 11 / 3.5 / 2.7; M4 × 0.7 / 0.7 / 63 / 13 / 4.5 / 3.4; M5 × 0.8 / 0.8 / 70 / 16 / 6 / 4.9; M6 × 1.0 / 1 / 80 / 19 / 6 / 4.9; M8 × 1.25 / 1.25 / 90 / 22 / 8 / 6.2; M10 × 1.5 / 1.5 / 100 / 24 / 10 / 8; M12 × 1.75 / 1.75 / 110 / 29 / 9 / 7
0307-875 | DIN371/376 thread-point or spiral-flute HSSE taps for stainless steel
Stated thread scope: M3–M12; Identification ring: White; Substrate: HSSE; Surface direction: Vapour-treatment direction; exact process on order; Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units: M3 × 0.5 / 0.5 / 56 / 11 / 3.5 / 2.7; M4 × 0.7 / 0.7 / 63 / 13 / 4.5 / 3.4; M5 × 0.8 / 0.8 / 70 / 16 / 6 / 4.9; M6 × 1.0 / 1 / 80 / 19 / 6 / 4.9; M8 × 1.25 / 1.25 / 90 / 22 / 8 / 6.2; M10 × 1.5 / 1.5 / 100 / 24 / 10 / 8; M12 × 1.75 / 1.75 / 110 / 29 / 9 / 7
0307-876 | JIS thread-point or spiral-flute HSSE taps for wear-resistant/alloy steel
Stated thread scope: M3–M12; Identification ring: Blue; Substrate: HSSE; Surface direction: Bright or TiCN; Thread / pitch / overall L1 / straight-point thread length / spiral thread length / shank d1 / square a — dimensions subject to approved drawing/units: M3 × 0.5 / 0.5 / 46 / 9 / 6 / 4 / not specified; M4 × 0.7 / 0.7 / 52 / 11 / 7 / 5 / not specified; M5 × 0.8 / 0.8 / 60 / 14 / 8 / 5.5 / not specified; M6 × 1.0 / 1 / 62 / 17 / 10 / 6 / not specified; M8 × 1.25 / 1.25 / 70 / 20 / 14 / 6.2 / not specified; M10 × 1.5 / 1.5 / 75 / 22 / 16 / 7 / not specified; M12 × 1.75 / 1.75 / 82 / 27 / 18 / 8.5 / not specified
0307-877 | JIS straight-flute HSSE taps for die steel
Stated thread scope: M3–M12; Identification ring: Red; Substrate: HSSE; Surface direction: Bright or TiCN; Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units: M3 × 0.5 / 0.5 / 46 / 9 / 4 / not specified; M4 × 0.7 / 0.7 / 52 / 11 / 5 / not specified; M5 × 0.8 / 0.8 / 60 / 14 / 5.5 / not specified; M6 × 1.0 / 1 / 62 / 17 / 6 / not specified; M8 × 1.25 / 1.25 / 70 / 20 / 6.2 / not specified; M10 × 1.5 / 1.5 / 75 / 22 / 7 / not specified; M12 × 1.75 / 1.75 / 82 / 27 / 8.5 / not specified
0307-878 | JIS spiral-flute HSSE taps for aluminium
Stated thread scope: M3–M12; Identification ring: Yellow; Substrate: HSSE; Surface direction: Bright or TiCN; Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units: M3 × 0.5 / 0.5 / 46 / 6 / 4 / not specified; M4 × 0.7 / 0.7 / 52 / 7 / 5 / not specified; M5 × 0.8 / 0.8 / 60 / 8 / 5.5 / not specified; M6 × 1.0 / 1 / 62 / 10 / 6 / not specified; M8 × 1.25 / 1.25 / 70 / 14 / 6.2 / not specified; M10 × 1.5 / 1.5 / 75 / 16 / 7 / not specified; M12 × 1.75 / 1.75 / 82 / 18 / 8.5 / not specified
0307-879 | JIS thread-point or spiral-flute HSSE taps for general workpiece selection
Stated thread scope: M3–M12; Identification ring: Green; Substrate: HSSE; Surface direction: Bright or TiN; Thread / pitch / overall L1 / straight-point thread length / spiral thread length / shank d1 / square a — dimensions subject to approved drawing/units: M3 × 0.5 / 0.5 / 46 / 9 / 6 / 4 / not specified; M4 × 0.7 / 0.7 / 52 / 11 / 7 / 5 / not specified; M5 × 0.8 / 0.8 / 60 / 14 / 8 / 5.5 / not specified; M6 × 1.0 / 1 / 62 / 17 / 10 / 6 / not specified; M8 × 1.25 / 1.25 / 70 / 20 / 14 / 6.2 / not specified; M10 × 1.5 / 1.5 / 75 / 22 / 16 / 7 / not specified; M12 × 1.75 / 1.75 / 82 / 27 / 18 / 8.5 / not specified
0307-880 | JIS straight-flute HSSE taps for brass
Stated thread scope: M3–M12; Identification ring: Orange; Substrate: HSSE; Surface direction: Bright or TiCN; Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units: M3 × 0.5 / 0.5 / 46 / 9 / 4 / not specified; M4 × 0.7 / 0.7 / 52 / 11 / 5 / not specified; M5 × 0.8 / 0.8 / 60 / 14 / 5.5 / not specified; M6 × 1.0 / 1 / 62 / 17 / 6 / not specified; M8 × 1.25 / 1.25 / 70 / 20 / 6.2 / not specified; M10 × 1.5 / 1.5 / 75 / 22 / 7 / not specified; M12 × 1.75 / 1.75 / 82 / 27 / 8.5 / not specified
0307-881 | JIS straight-flute HSSE taps for cast steel
Stated thread scope: M3–M12; Identification ring: Black; Substrate: HSSE; Surface direction: Oxynitride; Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units: M3 × 0.5 / 0.5 / 46 / 9 / 4 / not specified; M4 × 0.7 / 0.7 / 52 / 11 / 5 / not specified; M5 × 0.8 / 0.8 / 60 / 14 / 5.5 / not specified; M6 × 1.0 / 1 / 62 / 17 / 6 / not specified; M8 × 1.25 / 1.25 / 70 / 20 / 6.2 / not specified; M10 × 1.5 / 1.5 / 75 / 22 / 7 / not specified; M12 × 1.75 / 1.75 / 82 / 27 / 8.5 / not specified
0307-882 | JIS thread-point or spiral-flute HSSE taps for stainless steel
Stated thread scope: M3–M12; Identification ring: White; Substrate: HSSE; Surface direction: Vapour-treatment direction; exact process on order; Thread / pitch / overall L1 / straight-point thread length / spiral thread length / shank d1 / square a — dimensions subject to approved drawing/units: M3 × 0.5 / 0.5 / 46 / 9 / 6 / 4 / not specified; M4 × 0.7 / 0.7 / 52 / 11 / 7 / 5 / not specified; M5 × 0.8 / 0.8 / 60 / 14 / 8 / 5.5 / not specified; M6 × 1.0 / 1 / 62 / 17 / 10 / 6 / not specified; M8 × 1.25 / 1.25 / 70 / 20 / 14 / 6.2 / not specified; M10 × 1.5 / 1.5 / 75 / 22 / 16 / 7 / not specified; M12 × 1.75 / 1.75 / 82 / 27 / 18 / 8.5 / not specified
0307-883 | Internal-coolant HSSE thread-point taps
Thread scope: M8–M24; Substrate / coating: HSSE / AlTiN; Chamfer direction: 2P; Chamfer / thread / pitch / shank d2 / d3 / overall L1 / L2 / L3 / recommended pilot diameter (mm except thread/limit/count): 2P / M8 / 1,25 / 6 / 5,5 / 90 / 13 / 45 / 6,8; 2P / M10 / 1,5 / 7 / 6,5 / 100 / 15 / 50 / 8,5; 2P / M12 / 1,75 / 9 / 8,5 / 110 / 18 / 55 / 10,2; 2P / M14 / 2 / 11 / 10,5 / 110 / 20 / 55 / 12; 2P / M16 / 2 / 12 / 11,5 / 110 / 20 / 55 / 14; 2P / M18 / 2,5 / 14 / 13,5 / 125 / 25 / 65 / 15,5; 2P / M20 / 2,5 / 16 / 15,5 / 140 / 25 / 70 / 17,5; 2P / M22 / 2,5 / 18 / 17,5 / 140 / 25 / 70 / 19,5; 2P / M24 / 3 / 18 / 17,5 / 160 / 30 / 80 / 21
0307-884 | Internal-coolant HSSE spiral-flute taps
Thread scope: M8–M24; Substrate / coating: HSSE / AlTiN; Chamfer direction: 4P; Chamfer / thread / pitch / shank d2 / d3 / overall L1 / L2 / L3 / recommended pilot diameter (mm except thread/limit/count): 4P / M8 / 1,25 / 6 / 5,8 / 90 / 17,8 / 35 / 6,8; 4P / M10 / 1,5 / 7 / 6,8 / 100 / 19,8 / 39 / 8,5; 4P / M12 / 1,75 / 9 / 8,8 / 110 / 24,8 / 42 / 10,2; 4P / M14 / 2 / 11 / 10,5 / 110 / 24 / 50 / 12; 4P / M16 / 2 / 12 / 11,5 / 110 / 26 / 52 / 14; 4P / M18 / 2,5 / 14 / 13,5 / 125 / 31 / 57 / 15,5; 4P / M20 / 2,5 / 16 / 15,5 / 140 / 31 / 57 / 17,5; 4P / M22 / 2,5 / 18 / 17,5 / 140 / 32 / 58 / 19,5; 4P / M24 / 3 / 18 / 17,5 / 160 / 39 / 65 / 21
0307-885 | ANSI short-lead helical HSSE taps
Helix: 40°; Chamfer: 2.5P; Hole type: Blind hole; Substrate: HSSE; Surface choices: Bright, TiN or TiCN; Thread / pitch (metric or TPI as designated) / limit / chamfer / overall L / thread L1 / neck Ln / shank d2 / square a / square length / flutes — dimensions subject to approved drawing/units: No.4 / 40 / SF1 / 2.5P / 44 / 7.7 / 17 / 3 / 2.5 / 5 / 3; No.4 / 48 / SF1 / 2.5P / 44 / 7.7 / 17 / 3 / 2.5 / 5 / 3; No.6 / 32 / SF2 / 2.5P / 48 / 9.6 / 21 / 4 / 3.2 / 6 / 3; No.6 / 40 / SF1 / 2.5P / 48 / 9.6 / 21 / 4 / 3.2 / 6 / 3; No.8 / 32 / SF2 / 2.5P / 52 / 9.6 / 21 / 5 / 4 / 7 / 3; No.8 / 36 / SF2 / 2.5P / 52 / 9.6 / 21 / 5 / 4 / 7 / 3; No.10 / 24 / SF2 / 2.5P / 60 / 12.7 / 24 / 5.5 / 4.5 / 7 / 3; No.10 / 32 / SF2 / 2.5P / 60 / 12.7 / 24 / 5.5 / 4.5 / 7 / 3; No.12 / 24 / SF2 / 2.5P / 60 / 12.7 / 25 / 5.5 / 4.5 / 7 / 3; No.12 / 28 / SF2 / 2.5P / 60 / 12.7 / 25 / 5.5 / 4.5 / 7 / 3; 1/4 / 20 / SF3 / 2.5P / 62 / 15.3 / 29 / 6 / 4.5 / 7 / 3; 1/4 / 28 / SF2 / 2.5P / 62 / 15.3 / 29 / 6 / 4.5 / 7 / 3; 5/16 / 18 / SF3 / 2.5P / 70 / 17 / 37 / 6.1 / 5 / 8 / 3; 5/16 / 24 / SF2 / 2.5P / 70 / 17 / 37 / 6.1 / 5 / 8 / 3; 3/8 / 16 / SF3 / 2.5P / 75 / 19 / 41 / 7 / 5.5 / 8 / 3; 3/8 / 24 / SF2 / 2.5P / 75 / 19 / 41 / 7 / 5.5 / 8 / 3; 7/16 / 14 / SF3 / 2.5P / 80 / 22 / 48 / 8 / 6 / 9 / 3; 7/16 / 20 / SF3 / 2.5P / 80 / 22 / 48 / 8 / 6 / 9 / 3; 1/2 / 13 / SF3 / 2.5P / 85 / 23 / 48 / 9 / 7 / 10 / 3; 1/2 / 20 / SF3 / 2.5P / 85 / 23 / 48 / 9 / 7 / 10 / 3; 9/16 / 12 / SF2 / 2.5P / 90 / 25 / 48 / 10.5 / 8 / 11 / 3; 9/16 / 18 / SF2 / 2.5P / 90 / 17 / 48 / 10.5 / 8 / 11 / 3; 5/8 / 11 / SF3 / 2.5P / 95 / 28 / 52 / 12 / 9 / 12 / 3; 5/8 / 18 / SF2 / 2.5P / 95 / 17 / 52 / 12 / 9 / 12 / 3; 3/4 / 10 / SF3 / 2.5P / 105 / 31 / 58 / 14 / 11 / 14 / 4; 3/4 / 16 / SF2 / 2.5P / 105 / 19 / 58 / 14 / 11 / 14 / 4; 7/8 / 9 / SF3 / 2.5P / 115 / 34 / 63 / 17 / 13 / 16 / 4; 7/8 / 14 / SF2 / 2.5P / 115 / 22 / 63 / 17 / 13 / 16 / 4; 1 / 8 / SF3 / 2.5P / 125 / 38 / 68 / 20 / 15 / 18 / 4; 1 / 12 / SF3 / 2.5P / 125 / 25 / 68 / 20 / 15 / 18 / 4
0307-886 | ANSI spiral-point HSSE taps
Chamfer: 5P; Hole type: Through hole; Substrate: HSSE; Surface choices: Bright, TiN or TiCN; Thread / pitch (metric or TPI as designated) / limit / chamfer / overall L / thread L1 / neck Ln / shank d2 / square a / square length / flutes — dimensions subject to approved drawing/units: No.4 / 40 / SF2 / 5P / 44 / 15 / 21 / 3 / 2.5 / 5 / 2; No.4 / 48 / SF2 / 5P / 44 / 15 / 21 / 3 / 2.5 / 5 / 2; No.6 / 32 / SF2 / 5P / 48 / 13 / 21 / 4 / 3.2 / 6 / 3; No.6 / 40 / SF2 / 5P / 48 / 13 / 21 / 4 / 3.2 / 6 / 3; No.8 / 32 / SF2 / 5P / 52 / 13 / 21 / 5 / 4 / 7 / 3; No.8 / 36 / SF2 / 5P / 52 / 13 / 21 / 5 / 4 / 7 / 3; No.10 / 24 / SF2 / 5P / 60 / 16 / 24 / 5.5 / 4.5 / 7 / 3; No.10 / 32 / SF2 / 5P / 60 / 16 / 24 / 5.5 / 4.5 / 7 / 3; No.12 / 24 / SF2 / 5P / 60 / 17 / 25 / 5.5 / 4.5 / 7 / 3; No.12 / 28 / SF2 / 5P / 60 / 17 / 25 / 5.5 / 4.5 / 7 / 3; 1/4 / 20 / SF3 / 5P / 62 / 19 / 29 / 6 / 4.5 / 7 / 3; 1/4 / 28 / SF2 / 5P / 62 / 19 / 29 / 6 / 4.5 / 7 / 3; 5/16 / 18 / SF3 / 5P / 70 / 22 / 37 / 6.1 / 5 / 8 / 3; 5/16 / 24 / SF3 / 5P / 70 / 22 / 37 / 6.1 / 5 / 8 / 3; 3/8 / 16 / SF3 / 5P / 75 / 24 / 41 / 7 / 5.5 / 8 / 3; 3/8 / 24 / SF3 / 5P / 75 / 24 / 41 / 7 / 5.5 / 8 / 3; 7/16 / 14 / SF3 / 5P / 80 / 25 / 48 / 8 / 6 / 9 / 3; 7/16 / 20 / SF3 / 5P / 80 / 25 / 48 / 8 / 6 / 9 / 3; 1/2 / 13 / SF3 / 5P / 85 / 29 / 48 / 9 / 7 / 10 / 3; 1/2 / 20 / SF3 / 5P / 85 / 29 / 48 / 9 / 7 / 10 / 3; 9/16 / 12 / SF3 / 5P / 90 / 30 / 48 / 10.5 / 8 / 11 / 3; 9/16 / 18 / SF3 / 5P / 90 / 30 / 48 / 10.5 / 8 / 11 / 3; 5/8 / 11 / SF3 / 5P / 95 / 32 / 52 / 12 / 9 / 12 / 3; 5/8 / 18 / SF3 / 5P / 95 / 32 / 52 / 12 / 9 / 12 / 3; 3/4 / 10 / SF3 / 5P / 105 / 37 / 58 / 14 / 11 / 14 / 3; 3/4 / 16 / SF3 / 5P / 105 / 37 / 58 / 14 / 11 / 14 / 3; 7/8 / 9 / SF4 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; 7/8 / 14 / SF3 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; 1 / 8 / SF4 / 5P / 125 / 45 / 68 / 20 / 15 / 18 / 3; 1 / 12 / SF3 / 5P / 125 / 45 / 68 / 20 / 15 / 18 / 3
0307-887 | JIS helical powder-HSS taps
Helix: 45°; Chamfer: 2.5P table; 2–3P narrative; Hole type: Blind hole; Substrate: Powder-metal HSS; Surface choices: Bright or AlCrN; Thread / pitch (metric or TPI as designated) / limit / chamfer / overall L / thread L1 / neck Ln / shank d2 / square a / square length / flutes — dimensions subject to approved drawing/units: M3 / 0.5 / SF2 / 2.5P / 46 / 4 / 19 / 4 / 3.2 / 6 / 3; M3.5 / 0.6 / SF2 / 2.5P / 48 / 4.8 / 20 / 4 / 3.2 / 6 / 3; M4 / 0.7 / SF3 / 2.5P / 52 / 5.6 / 21 / 5 / 4 / 7 / 3; MF4 / 0.5 / SF2 / 2.5P / 52 / 5.6 / 21 / 5 / 4 / 7 / 3; M5 / 0.8 / SF3 / 2.5P / 60 / 6.4 / 24 / 5.5 / 4.5 / 7 / 3; MF5 / 0.5 / SF2 / 2.5P / 60 / 6.4 / 24 / 5.5 / 4.5 / 7 / 3; M6 / 1 / SF3 / 2.5P / 62 / 8 / 29 / 6 / 4.5 / 7 / 3; MF6 / 0.75 / SF2 / 2.5P / 62 / 8 / 29 / 6 / 4.5 / 7 / 3; M7 / 1 / SF3 / 2.5P / 65 / 12 / 33 / 6.2 / 5 / 8 / 3; M8 / 1.25 / SF3 / 2.5P / 70 / 15 / 37 / 6.2 / 5 / 8 / 3; MF8 / 1 / SF3 / 2.5P / 70 / 12 / 37 / 6.2 / 5 / 8 / 3; M10 / 1.5 / SF3 / 2.5P / 75 / 18 / 41 / 7 / 5.5 / 9 / 3; MF10 / 1.25 / SF3 / 2.5P / 75 / 15 / 41 / 7 / 5.5 / 9 / 3; MF10 / 1 / SF3 / 2.5P / 75 / 15 / 41 / 7 / 5.5 / 9 / 3; M12 / 1.75 / SF4 / 2.5P / 82 / 21 / 48 / 8.5 / 6.5 / 9 / 3; MF12 / 1.5 / SF3 / 2.5P / 82 / 18 / 48 / 8.5 / 6.5 / 9 / 3; MF12 / 1.25 / SF3 / 2.5P / 82 / 18 / 48 / 8.5 / 6.5 / 9 / 3; MF12 / 1 / SF3 / 2.5P / 82 / 18 / 48 / 8.5 / 6.5 / 9 / 3; M14 / 2 / SF4 / 2.5P / 88 / 24 / 48 / 10.5 / 8 / 11 / 3; MF14 / 1.5 / SF3 / 2.5P / 88 / 18 / 48 / 10.5 / 8 / 11 / 3; MF14 / 1.25 / SF3 / 2.5P / 88 / 18 / 48 / 10.5 / 8 / 11 / 3; MF14 / 1 / SF3 / 2.5P / 88 / 18 / 48 / 10.5 / 8 / 11 / 3; M16 / 2 / SF4 / 2.5P / 95 / 24 / 52 / 12.5 / 10 / 13 / 3; MF16 / 1.5 / SF3 / 2.5P / 95 / 18 / 52 / 12.5 / 10 / 13 / 3; MF16 / 1 / SF3 / 2.5P / 95 / 18 / 52 / 12.5 / 10 / 13 / 3; M18 / 2.5 / SF5 / 2.5P / 100 / 30 / 55 / 14 / 11 / 14 / 4; MF18 / 2 / SF4 / 2.5P / 100 / 24 / 55 / 14 / 11 / 14 / 4; MF18 / 1.5 / SF4 / 2.5P / 100 / 24 / 55 / 14 / 11 / 14 / 4; MF18 / 1 / SF3 / 2.5P / 100 / 24 / 55 / 14 / 11 / 14 / 4; M20 / 2.5 / SF5 / 2.5P / 105 / 30 / 58 / 15 / 12 / 15 / 4; MF20 / 2 / SF4 / 2.5P / 105 / 24 / 58 / 15 / 12 / 15 / 4; MF20 / 1.5 / SF4 / 2.5P / 105 / 24 / 58 / 15 / 12 / 15 / 4; MF20 / 1 / SF3 / 2.5P / 105 / 24 / 58 / 15 / 12 / 15 / 4; M22 / 2.5 / SF5 / 2.5P / 115 / 30 / 63 / 17 / 13 / 16 / 4; MF22 / 2 / SF4 / 2.5P / 115 / 24 / 63 / 17 / 13 / 16 / 4; MF22 / 1.5 / SF4 / 2.5P / 115 / 24 / 63 / 17 / 13 / 16 / 4; MF22 / 1 / SF3 / 2.5P / 115 / 24 / 63 / 17 / 13 / 16 / 4; M24 / 3 / SF5 / 2.5P / 120 / 36 / 66 / 19 / 15 / 18 / 4; MF24 / 2 / SF4 / 2.5P / 120 / 24 / 66 / 19 / 15 / 18 / 4; MF24 / 1.5 / SF4 / 2.5P / 120 / 24 / 66 / 19 / 15 / 18 / 4; MF24 / 1 / SF3 / 2.5P / 120 / 24 / 66 / 19 / 15 / 18 / 4
0307-888 | JIS spiral-point powder-HSS taps
Chamfer: 5P table; 4–5P narrative; Hole type: Through hole; Substrate: Powder-metal HSS; Surface choices: Bright or AlCrN; Thread / pitch (metric or TPI as designated) / limit / chamfer / overall L / thread L1 / neck Ln / shank d2 / square a / square length / flutes — dimensions subject to approved drawing/units: M3 / 0.5 / SF3 / 5P / 46 / 11 / 19 / 4 / 3.2 / 6 / 3; M3.5 / 0.6 / SF2 / 5P / 48 / 13 / 20 / 4 / 3.2 / 6 / 3; M4 / 0.7 / SF3 / 5P / 52 / 13 / 21 / 5 / 4 / 7 / 3; MF4 / 0.5 / SF3 / 5P / 52 / 13 / 21 / 5 / 4 / 7 / 3; M5 / 0.8 / SF3 / 5P / 60 / 16 / 24 / 5.5 / 4.5 / 7 / 3; MF5 / 0.5 / SF3 / 5P / 60 / 16 / 24 / 5.5 / 4.5 / 7 / 3; M6 / 1 / SF3 / 5P / 62 / 19 / 29 / 6 / 4.5 / 7 / 3; MF6 / 0.75 / SF3 / 5P / 62 / 19 / 29 / 6 / 4.5 / 7 / 3; M7 / 1 / SF3 / 5P / 65 / 19 / 33 / 6.2 / 5 / 8 / 3; M8 / 1.25 / SF3 / 5P / 70 / 22 / 37 / 6.2 / 5 / 8 / 3; MF8 / 1 / SF3 / 5P / 70 / 22 / 37 / 6.2 / 5 / 8 / 3; M10 / 1.5 / SF4 / 5P / 75 / 24 / 41 / 7 / 5.5 / 9 / 3; MF10 / 1.25 / SF3 / 5P / 75 / 24 / 41 / 7 / 5.5 / 9 / 3; MF10 / 1 / SF3 / 5P / 75 / 24 / 41 / 7 / 5.5 / 9 / 3; M12 / 1.75 / SF4 / 5P / 82 / 29 / 48 / 8.5 / 6.5 / 9 / 3; MF12 / 1.5 / SF4 / 5P / 82 / 29 / 48 / 8.5 / 6.5 / 9 / 3; MF12 / 1.25 / SF3 / 5P / 82 / 29 / 48 / 8.5 / 6.5 / 9 / 3; MF12 / 1 / SF3 / 5P / 82 / 29 / 48 / 8.5 / 6.5 / 9 / 3; M14 / 2 / SF4 / 5P / 88 / 30 / 48 / 10.5 / 8 / 11 / 3; MF14 / 1.5 / SF4 / 5P / 88 / 30 / 48 / 10.5 / 8 / 11 / 3; MF14 / 1.25 / SF4 / 5P / 88 / 30 / 48 / 10.5 / 8 / 11 / 3; MF14 / 1 / SF3 / 5P / 88 / 30 / 48 / 10.5 / 8 / 11 / 3; M16 / 2 / SF4 / 5P / 95 / 32 / 52 / 12.5 / 10 / 13 / 3; MF16 / 1.5 / SF4 / 5P / 95 / 32 / 52 / 12.5 / 10 / 13 / 3; MF16 / 1 / SF3 / 5P / 95 / 32 / 52 / 12.5 / 10 / 13 / 3; M18 / 2.5 / SF5 / 5P / 100 / 37 / 55 / 14 / 11 / 14 / 3; MF18 / 2 / SF4 / 5P / 100 / 37 / 55 / 14 / 11 / 14 / 3; MF18 / 1.5 / SF4 / 5P / 100 / 37 / 55 / 14 / 11 / 14 / 3; MF18 / 1 / SF3 / 5P / 100 / 37 / 55 / 14 / 11 / 14 / 3; M20 / 2.5 / SF5 / 5P / 105 / 37 / 58 / 15 / 12 / 15 / 3; MF20 / 2 / SF4 / 5P / 105 / 37 / 58 / 15 / 12 / 15 / 3; MF20 / 1.5 / SF4 / 5P / 105 / 37 / 58 / 15 / 12 / 15 / 3; MF20 / 1 / SF3 / 5P / 105 / 37 / 58 / 15 / 12 / 15 / 3; M22 / 2.5 / SF5 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; MF22 / 2 / SF4 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; MF22 / 1.5 / SF4 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; MF22 / 1 / SF3 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; M24 / 3 / SF5 / 5P / 120 / 45 / 66 / 19 / 15 / 18 / 3; MF24 / 2 / SF4 / 5P / 120 / 45 / 66 / 19 / 15 / 18 / 3; MF24 / 1.5 / SF4 / 5P / 120 / 45 / 66 / 19 / 15 / 18 / 3; MF24 / 1 / SF3 / 5P / 120 / 45 / 66 / 19 / 15 / 18 / 3
0307-889 | ANSI helical powder-HSS taps
Helix: 45°; Chamfer: 2.5P; Hole type: Blind hole; Substrate: Powder-metal HSS; Surface choices: Bright or AlCrN; Thread / pitch (metric or TPI as designated) / limit / chamfer / overall L / thread L1 / neck Ln / shank d2 / square a / square length / flutes — dimensions subject to approved drawing/units: No.4 / 40 / SF2 / 2.5P / 44 / 5.1 / 17 / 3 / 2.5 / 5 / 2; No.4 / 48 / SF2 / 2.5P / 44 / 5.1 / 17 / 3 / 2.5 / 5 / 2; No.6 / 32 / SF2 / 2.5P / 48 / 6.4 / 21 / 4 / 3.2 / 6 / 2; No.6 / 40 / SF2 / 2.5P / 48 / 6.4 / 21 / 4 / 3.2 / 6 / 2; No.8 / 32 / SF2 / 2.5P / 52 / 6.4 / 21 / 5 / 4 / 7 / 2; No.8 / 36 / SF2 / 2.5P / 52 / 6.4 / 21 / 5 / 4 / 7 / 2; No.10 / 24 / SF2 / 2.5P / 60 / 8.5 / 24 / 5.5 / 4.5 / 7 / 2; No.10 / 32 / SF2 / 2.5P / 60 / 8.5 / 24 / 5.5 / 4.5 / 7 / 2; No.12 / 24 / SF2 / 2.5P / 60 / 8.5 / 24 / 5.5 / 4.5 / 7 / 2; No.12 / 28 / SF2 / 2.5P / 60 / 8.5 / 24 / 5.5 / 4.5 / 7 / 2; 1/4 / 20 / SF3 / 2.5P / 62 / 10.2 / 29 / 6 / 4.5 / 7 / 2; 1/4 / 28 / SF2 / 2.5P / 62 / 10.2 / 29 / 6 / 4.5 / 7 / 2; 5/16 / 18 / SF3 / 2.5P / 70 / 17 / 37 / 6.1 / 5 / 8 / 3; 5/16 / 24 / SF3 / 2.5P / 70 / 13 / 37 / 6.1 / 5 / 8 / 3; 3/8 / 16 / SF3 / 2.5P / 75 / 19 / 41 / 7 / 5.5 / 8 / 3; 3/8 / 24 / SF3 / 2.5P / 75 / 13 / 41 / 7 / 5.5 / 8 / 3; 7/16 / 14 / SF3 / 2.5P / 80 / 22 / 48 / 8 / 6 / 9 / 3; 7/16 / 20 / SF3 / 2.5P / 80 / 15 / 48 / 8 / 6 / 9 / 3; 1/2 / 13 / SF3 / 2.5P / 85 / 23 / 48 / 9 / 7 / 10 / 3; 1/2 / 20 / SF3 / 2.5P / 85 / 15 / 48 / 9 / 7 / 10 / 3; 9/16 / 12 / SF4 / 2.5P / 90 / 25 / 48 / 10.5 / 8 / 11 / 3; 9/16 / 18 / SF3 / 2.5P / 90 / 17 / 48 / 10.5 / 8 / 11 / 3; 5/8 / 11 / SF4 / 2.5P / 95 / 28 / 52 / 12 / 9 / 12 / 4; 5/8 / 18 / SF3 / 2.5P / 95 / 17 / 52 / 12 / 9 / 12 / 4; 3/4 / 10 / SF4 / 2.5P / 105 / 31 / 58 / 14 / 11 / 14 / 4; 3/4 / 16 / SF3 / 2.5P / 105 / 19 / 58 / 14 / 11 / 14 / 4; 7/8 / 9 / SF5 / 2.5P / 115 / 34 / 63 / 17 / 13 / 16 / 4; 7/8 / 14 / SF4 / 2.5P / 115 / 22 / 63 / 17 / 13 / 16 / 4; 1 / 8 / SF5 / 2.5P / 125 / 38 / 68 / 20 / 15 / 18 / 4; 1 / 12 / SF5 / 2.5P / 125 / 25 / 68 / 20 / 15 / 18 / 4
0307-890 | ANSI spiral-point powder-HSS taps
Chamfer: 5P; Hole type: Through hole; Substrate: Powder-metal HSS; Surface choices: Bright or AlCrN; Thread / pitch (metric or TPI as designated) / limit / chamfer / overall L / thread L1 / neck Ln / shank d2 / square a / square length / flutes — dimensions subject to approved drawing/units: No.4 / 40 / SF2 / 5P / 44 / 15 / not specified / 3 / 2.5 / 5 / 2; No.4 / 48 / SF2 / 5P / 44 / 15 / not specified / 3 / 2.5 / 5 / 2; No.6 / 32 / SF2 / 5P / 48 / 13 / 21 / 4 / 3.2 / 6 / 3; No.6 / 40 / SF2 / 5P / 48 / 13 / 21 / 4 / 3.2 / 6 / 3; No.8 / 32 / SF2 / 5P / 52 / 13 / 21 / 5 / 4 / 7 / 3; No.8 / 36 / SF2 / 5P / 52 / 13 / 21 / 5 / 4 / 7 / 3; No.10 / 24 / SF2 / 5P / 60 / 16 / 24 / 5.5 / 4.5 / 7 / 3; No.10 / 32 / SF2 / 5P / 60 / 16 / 24 / 5.5 / 4.5 / 7 / 3; No.12 / 24 / SF2 / 5P / 60 / 17 / 25 / 5.5 / 4.5 / 7 / 3; No.12 / 28 / SF2 / 5P / 60 / 17 / 25 / 5.5 / 4.5 / 7 / 3; 1/4 / 20 / SF3 / 5P / 62 / 19 / 29 / 6 / 4.5 / 7 / 3; 1/4 / 28 / SF2 / 5P / 62 / 19 / 29 / 6 / 4.5 / 7 / 3; 5/16 / 18 / SF3 / 5P / 70 / 22 / 37 / 6.1 / 5 / 8 / 3; 5/16 / 24 / SF3 / 5P / 70 / 22 / 37 / 6.1 / 5 / 8 / 3; 3/8 / 16 / SF3 / 5P / 75 / 24 / 41 / 7 / 5.5 / 8 / 3; 3/8 / 24 / SF3 / 5P / 75 / 24 / 41 / 7 / 5.5 / 8 / 3; 7/16 / 14 / SF3 / 5P / 80 / 25 / 48 / 8 / 6 / 9 / 3; 7/16 / 20 / SF3 / 5P / 80 / 25 / 48 / 8 / 6 / 9 / 3; 1/2 / 13 / SF4 / 5P / 85 / 29 / 48 / 9 / 7 / 10 / 3; 1/2 / 20 / SF3 / 5P / 85 / 29 / 48 / 9 / 7 / 10 / 3; 9/16 / 12 / SF4 / 5P / 90 / 30 / 48 / 10.5 / 8 / 11 / 3; 9/16 / 18 / SF3 / 5P / 90 / 30 / 48 / 10.5 / 8 / 11 / 3; 5/8 / 11 / SF4 / 5P / 95 / 32 / 52 / 12 / 9 / 12 / 3; 5/8 / 18 / SF3 / 5P / 95 / 32 / 52 / 12 / 9 / 12 / 3; 3/4 / 10 / SF4 / 5P / 105 / 37 / 58 / 14 / 11 / 14 / 3; 3/4 / 16 / SF4 / 5P / 105 / 37 / 58 / 14 / 11 / 14 / 3; 7/8 / 9 / SF5 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; 7/8 / 14 / SF4 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; 1 / 8 / SF5 / 5P / 125 / 45 / 68 / 20 / 15 / 18 / 3; 1 / 12 / SF4 / 5P / 125 / 45 / 68 / 20 / 15 / 18 / 3
0307-891 | Helical powder-HSS taps, Bright direction
Substrate: Powder-metal HSS; Surface choice: Bright; Chamfer: 2.5P; Layout references: DIN371, DIN374, DIN376 by thread size; Thread / lead / tap limit / overall L / thread L1 / neck Ln / shank D / square a / flutes — dimensions subject to approved drawing/units: M2 × 0.4 / 2.5P / 6H / 45 / 8 / 14 / 2.8 / 2.1 / 2; M2.5 × 0.45 / 2.5P / 6H / 50 / 5 / 15 / 2.8 / 2.1 / 3; M3 × 0.5 / 2.5P / 6H / 56 / 5 / 18 / 3.5 / 2.7 / 3; M3.5 × 0.6 / 2.5P / 6H / 56 / 6 / 20 / 4 / 3 / 3; M4 × 0.7 / 2.5P / 6H / 63 / 7 / 21 / 4.5 / 3.4 / 3; MF4 × 0.5 / 2.5P / 6G / 63 / 7 / 21 / 4.5 / 3.4 / 3; M5 × 0.8 / 2.5P / 6H / 70 / 8 / 25 / 6 / 4.9 / 3; MF5×0.5 / 2.5P / 6H / 70 / 8 / 25 / 6 / 4.9 / 3; MF5×0.5 / 2.5P / 6G / 70 / 8 / 25 / 6 / 4.9 / 3; M6×1.0 / 2.5P / 6H / 80 / 10 / 30 / 6 / 4.9 / 3; M6×1.0 / 2.5P / 6G / 80 / 10 / 30 / 6 / 4.9 / 3; MF6×0.75 / 2.5P / 6H / 80 / 10 / 30 / 6 / 4.9 / 3; MF6×0.75 / 2.5P / 6G / 80 / 10 / 30 / 6 / 4.9 / 3; M8×1.25 / 2.5P / 6H / 90 / 13 / 35 / 8 / 6.2 / 3; M8×1.25 / 2.5P / 6G / 90 / 13 / 35 / 8 / 6.2 / 3; MF8×1.0 / 2.5P / 6H / 90 / 13 / 35 / 8 / 6.2 / 3; MF8×1.0 / 2.5P / 6G / 90 / 13 / 35 / 8 / 6.2 / 3; M10×1.5 / 2.5P / 6H / 100 / 15 / 39 / 10 / 8 / 3; M10×1.5 / 2.5P / 6G / 100 / 15 / 39 / 10 / 8 / 3; MF10×1.25 / 2.5P / 6H / 100 / 13 / 39 / 10 / 8 / 3; MF10×1.25 / 2.5P / 6G / 100 / 13 / 39 / 10 / 8 / 3; MF10×1.0 / 2.5P / 6H / 100 / 13 / 39 / 10 / 8 / 3; MF10×1.0 / 2.5P / 6G / 100 / 13 / 39 / 10 / 8 / 3; M12×1.75 / 2.5P / 6H / 110 / 18 / 53 / 9 / 7 / 3; M12×1.75 / 2.5P / 6G / 110 / 18 / 53 / 9 / 7 / 3; MF12×1.5 / 2.5P / 6H / 100 / 15 / 48 / 9 / 7 / 3; MF12×1.5 / 2.5P / 6G / 100 / 15 / 48 / 9 / 7 / 3; MF12×1.25 / 2.5P / 6H / 100 / 15 / 48 / 9 / 7 / 3; MF12×1.25 / 2.5P / 6G / 100 / 15 / 48 / 9 / 7 / 3; MF12×1.0 / 2.5P / 6H / 100 / 15 / 48 / 9 / 7 / 3; MF12×1.0 / 2.5P / 6G / 100 / 15 / 48 / 9 / 7 / 3; M14×2.0 / 2.5P / 6H / 110 / 20 / 53 / 11 / 9 / 3; M14×2.0 / 2.5P / 6G / 110 / 20 / 53 / 11 / 9 / 3; MF14×1.5 / 2.5P / 6H / 100 / 15 / 48 / 11 / 9 / 3; MF14×1.5 / 2.5P / 6G / 100 / 15 / 48 / 11 / 9 / 3; MF14×1.0 / 2.5P / 6H / 100 / 15 / 48 / 11 / 9 / 3; MF14×1.0 / 2.5P / 6G / 100 / 15 / 48 / 11 / 9 / 3; M16×2.0 / 2.5P / 6H / 110 / 20 / 53 / 12 / 9 / 3; M16×2.0 / 2.5P / 6G / 110 / 20 / 53 / 12 / 9 / 3; MF16×1.5 / 2.5P / 6H / 100 / 15 / 48 / 12 / 9 / 3; MF16×1.5 / 2.5P / 6G / 100 / 15 / 48 / 12 / 9 / 3; MF16×1.0 / 2.5P / 6H / 100 / 15 / 48 / 12 / 9 / 3; MF16×1.0 / 2.5P / 6G / 100 / 15 / 48 / 12 / 9 / 3
0307-892 | Helical powder-HSS taps, AlCrN direction
Substrate: Powder-metal HSS; Surface choice: AlCrN; Chamfer: 2.5P; Layout references: DIN371, DIN374, DIN376 by thread size; Thread / lead / tap limit / overall L / thread L1 / neck Ln / shank D / square a / flutes — dimensions subject to approved drawing/units: M2 x 0.4 / 2.5P / 6H / 45 / 8 / 14 / 2.8 / 2.1 / 2; M2 x 0.4 / 2.5P / 6G / 45 / 8 / 14 / 2.8 / 2.1 / 2; M2.5 x 0.45 / 2.5P / 6H / 50 / 5 / 15 / 2.8 / 2.1 / 3; M2.5 x 0.45 / 2.5P / 6G / 50 / 5 / 15 / 2.8 / 2.1 / 3; M3 x 0.5 / 2.5P / 6H / 56 / 5 / 18 / 3.5 / 2.7 / 3; M3 x 0.5 / 2.5P / 6G / 56 / 5 / 18 / 3.5 / 2.7 / 3; M3.5 x 0.6 / 2.5P / 6H / 56 / 6 / 20 / 4 / 3 / 3; M3.5 x 0.6 / 2.5P / 6G / 56 / 6 / 20 / 4 / 3 / 3; M4 x 0.7 / 2.5P / 6H / 63 / 7 / 21 / 4.5 / 3.4 / 3; M4 x 0.7 / 2.5P / 6G / 63 / 7 / 21 / 4.5 / 3.4 / 3; MF4 x 0.5 / 2.5P / 6H / 63 / 7 / 21 / 4.5 / 3.4 / 3; MF4 x 0.5 / 2.5P / 6G / 63 / 7 / 21 / 4.5 / 3.4 / 3; M5 x 0.8 / 2.5P / 6H / 70 / 8 / 25 / 6 / 4.9 / 3; M5 x 0.8 / 2.5P / 6G / 70 / 8 / 25 / 6 / 4.9 / 3; MF5 x 0.5 / 2.5P / 6H / 70 / 8 / 25 / 6 / 4.9 / 3; MF5 x 0.5 / 2.5P / 6G / 70 / 8 / 25 / 6 / 4.9 / 3; M6 x 1.0 / 2.5P / 6H / 80 / 10 / 30 / 6 / 4.9 / 3; M6 x 1.0 / 2.5P / 6G / 80 / 10 / 30 / 6 / 4.9 / 3; MF6 x 0.75 / 2.5P / 6H / 80 / 10 / 30 / 6 / 4.9 / 3; MF6 x 0.75 / 2.5P / 6G / 80 / 10 / 30 / 6 / 4.9 / 3; M8 x 1.25 / 2.5P / 6H / 90 / 13 / 35 / 8 / 6.2 / 3; M8 x 1.25 / 2.5P / 6G / 90 / 13 / 35 / 8 / 6.2 / 3; MF8 x 1.0 / 2.5P / 6H / 90 / 13 / 35 / 8 / 6.2 / 3; MF8 x 1.0 / 2.5P / 6G / 90 / 13 / 35 / 8 / 6.2 / 3; M10 x 1.5 / 2.5P / 6H / 100 / 15 / 39 / 10 / 8 / 3; M10 x 1.5 / 2.5P / 6G / 100 / 15 / 39 / 10 / 8 / 3; MF10 x 1.25 / 2.5P / 6H / 100 / 13 / 39 / 10 / 8 / 3; MF10 x 1.25 / 2.5P / 6G / 100 / 13 / 39 / 10 / 8 / 3; MF10 x 1.0 / 2.5P / 6H / 100 / 13 / 39 / 10 / 8 / 3; MF10 x 1.0 / 2.5P / 6G / 100 / 13 / 39 / 10 / 8 / 3; M12 x 1.75 / 2.5P / 6H / 110 / 18 / 53 / 9 / 7 / 3; M12 x 1.75 / 2.5P / 6G / 110 / 18 / 53 / 9 / 7 / 3; MF12 x 1.5 / 2.5P / 6H / 100 / 15 / 48 / 9 / 7 / 3; MF12 x 1.5 / 2.5P / 6G / 100 / 15 / 48 / 9 / 7 / 3; MF12 x 1.25 / 2.5P / 6H / 100 / 15 / 48 / 9 / 7 / 3; MF12 x 1.25 / 2.5P / 6G / 100 / 15 / 48 / 9 / 7 / 3; MF12 x 1.0 / 2.5P / 6H / 100 / 15 / 48 / 9 / 7 / 3; MF12 x 1.0 / 2.5P / 6G / 100 / 15 / 48 / 9 / 7 / 3; M14 x 2.0 / 2.5P / 6H / 110 / 20 / 53 / 11 / 9 / 3; M14 x 2.0 / 2.5P / 6G / 110 / 20 / 53 / 11 / 9 / 3; MF14 x 1.5 / 2.5P / 6H / 100 / 15 / 48 / 11 / 9 / 3; MF14 x 1.5 / 2.5P / 6G / 100 / 15 / 48 / 11 / 9 / 3; MF14 x 1.0 / 2.5P / 6H / 100 / 15 / 48 / 11 / 9 / 3; MF14 x 1.0 / 2.5P / 6G / 100 / 15 / 48 / 11 / 9 / 3; M16 x 2.0 / 2.5P / 6H / 110 / 20 / 53 / 12 / 9 / 3; M16 x 2.0 / 2.5P / 6G / 110 / 20 / 53 / 12 / 9 / 3; MF16 x 1.5 / 2.5P / 6H / 100 / 15 / 48 / 12 / 9 / 3; MF16 x 1.5 / 2.5P / 6G / 100 / 15 / 48 / 12 / 9 / 3; MF16 x 1.0 / 2.5P / 6H / 100 / 15 / 48 / 12 / 9 / 3; MF16 x 1.0 / 2.5P / 6G / 100 / 15 / 48 / 12 / 9 / 3
0307-893 | Spiral-point powder-HSS taps, Bright direction
Substrate: Powder-metal HSS; Surface choice: Bright; Chamfer: 5P; Layout references: DIN371, DIN374, DIN376 by thread size; Thread / lead / tap limit / overall L / thread L1 / neck Ln / shank D / square a / flutes — dimensions subject to approved drawing/units: M2 x 0.4 / 5P / 6H / 45 / 8 / 14 / 2.8 / 2.1 / 2; M2 x 0.4 / 5P / 6G / 45 / 8 / 14 / 2.8 / 2.1 / 2; M2.5 x 0.45 / 5P / 6H / 50 / 9 / 15 / 2.8 / 2.1 / 3; M2.5 x 0.45 / 5P / 6G / 50 / 9 / 15 / 2.8 / 2.1 / 3; M3 x 0.5 / 5P / 6H / 56 / 9 / 15 / 2.8 / 2.1 / 3; M3 x 0.5 / 5P / 6G / 56 / 9 / 15 / 2.8 / 2.1 / 3; M3.5 x 0.6 / 5P / 6H / 56 / 12 / 20 / 4 / 3 / 3; M3.5 x 0.6 / 5P / 6G / 56 / 12 / 20 / 4 / 3 / 3; M4 x 0.7 / 5P / 6H / 63 / 13 / 21 / 4.5 / 3.4 / 3; M4 x 0.7 / 5P / 6G / 63 / 13 / 21 / 4.5 / 3.4 / 3; MF4 x 0.5 / 5P / 6H / 63 / 13 / 21 / 4.5 / 3.4 / 3; MF4 x 0.5 / 5P / 6G / 63 / 13 / 21 / 4.5 / 3.4 / 3; M5 x 0.8 / 5P / 6H / 70 / 14 / 25 / 6 / 4.9 / 3; M5 x 0.8 / 5P / 6G / 70 / 14 / 25 / 6 / 4.9 / 3; MF5 x 0.5 / 5P / 6H / 70 / 14 / 25 / 6 / 4.9 / 3; MF5 x 0.5 / 5P / 6G / 70 / 14 / 25 / 6 / 4.9 / 3; M6 x 1.0 / 5P / 6H / 80 / 15 / 30 / 6 / 4.9 / 3; M6 x 1.0 / 5P / 6G / 80 / 15 / 30 / 6 / 4.9 / 3; MF6 x 0.75 / 5P / 6H / 80 / 15 / 30 / 6 / 4.9 / 3; MF6 x 0.75 / 5P / 6G / 80 / 15 / 30 / 6 / 4.9 / 3; M8 x 1.25 / 5P / 6H / 90 / 18 / 35 / 8 / 6.2 / 3; M8 x 1.25 / 5P / 6G / 90 / 18 / 35 / 8 / 6.2 / 3; MF8 x 1.0 / 5P / 6H / 90 / 18 / 35 / 8 / 6.2 / 3; MF8 x 1.0 / 5P / 6G / 90 / 18 / 35 / 8 / 6.2 / 3; M10 x 1.5 / 5P / 6H / 100 / 20 / 39 / 10 / 8 / 3; M10 x 1.5 / 5P / 6G / 100 / 20 / 39 / 10 / 8 / 3; MF10 x 1.25 / 5P / 6H / 100 / 16 / 39 / 10 / 8 / 3; MF10 x 1.25 / 5P / 6G / 100 / 16 / 39 / 10 / 8 / 3; MF10 x 1.0 / 5P / 6H / 100 / 16 / 39 / 10 / 8 / 3; MF10 x 1.0 / 5P / 6G / 100 / 16 / 39 / 10 / 8 / 3; M12 x 1.75 / 5P / 6H / 110 / 24 / 53 / 9 / 7 / 3; M12 x 1.75 / 5P / 6G / 110 / 24 / 53 / 9 / 7 / 3; MF12 x 1.5 / 5P / 6H / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.5 / 5P / 6G / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.25 / 5P / 6H / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.25 / 5P / 6G / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.0 / 5P / 6H / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.0 / 5P / 6G / 100 / 22 / 48 / 9 / 7 / 3; M14 x 2.0 / 5P / 6H / 110 / 26 / 53 / 11 / 9 / 3; M14 x 2.0 / 5P / 6G / 110 / 26 / 53 / 11 / 9 / 3; MF14 x 1.5 / 5P / 6H / 100 / 22 / 48 / 11 / 9 / 3; MF14 x 1.5 / 5P / 6G / 100 / 22 / 48 / 11 / 9 / 3; MF14 x 1.0 / 5P / 6H / 100 / 22 / 48 / 11 / 9 / 3; MF14 x 1.0 / 5P / 6G / 100 / 22 / 48 / 11 / 9 / 3; M16 x 2.0 / 5P / 6H / 110 / 27 / 53 / 12 / 9 / 3; M16 x 2.0 / 5P / 6G / 110 / 27 / 53 / 12 / 9 / 3; MF16 x 1.5 / 5P / 6H / 100 / 22 / 48 / 12 / 9 / 3; MF16 x 1.5 / 5P / 6G / 100 / 22 / 48 / 12 / 9 / 3; MF16 x 1.0 / 5P / 6H / 100 / 22 / 48 / 12 / 9 / 3; MF16 x 1.0 / 5P / 6G / 100 / 22 / 48 / 12 / 9 / 3
0307-894 | Spiral-point powder-HSS taps, AlCrN direction
Substrate: Powder-metal HSS; Surface choice: AlCrN; Chamfer: 5P; Layout references: DIN371, DIN374, DIN376 by thread size; Thread / lead / tap limit / overall L / thread L1 / neck Ln / shank D / square a / flutes — dimensions subject to approved drawing/units: M2 x 0.4 / 5P / 6H / 45 / 8 / 14 / 2.8 / 2.1 / 2; M2 x 0.4 / 5P / 6G / 45 / 8 / 14 / 2.8 / 2.1 / 2; M2.5 x 0.45 / 5P / 6H / 50 / 9 / 15 / 2.8 / 2.1 / 3; M2.5 x 0.45 / 5P / 6G / 50 / 9 / 15 / 2.8 / 2.1 / 3; M3 x 0.5 / 5P / 6H / 56 / 9 / 15 / 2.8 / 2.1 / 3; M3 x 0.5 / 5P / 6G / 56 / 9 / 15 / 2.8 / 2.1 / 3; M3.5 x 0.6 / 5P / 6H / 56 / 12 / 20 / 4 / 3 / 3; M3.5 x 0.6 / 5P / 6G / 56 / 12 / 20 / 4 / 3 / 3; M4 x 0.7 / 5P / 6H / 63 / 13 / 21 / 4.5 / 3.4 / 3; M4 x 0.7 / 5P / 6G / 63 / 13 / 21 / 4.5 / 3.4 / 3; MF4 x 0.5 / 5P / 6H / 63 / 13 / 21 / 4.5 / 3.4 / 3; MF4 x 0.5 / 5P / 6G / 63 / 13 / 21 / 4.5 / 3.4 / 3; M5 x 0.8 / 5P / 6H / 70 / 14 / 25 / 6 / 4.9 / 3; M5 x 0.8 / 5P / 6G / 70 / 14 / 25 / 6 / 4.9 / 3; MF5 x 0.5 / 5P / 6H / 70 / 14 / 25 / 6 / 4.9 / 3; MF5 x 0.5 / 5P / 6G / 70 / 14 / 25 / 6 / 4.9 / 3; M6 x 1.0 / 5P / 6H / 80 / 15 / 30 / 6 / 4.9 / 3; M6 x 1.0 / 5P / 6G / 80 / 15 / 30 / 6 / 4.9 / 3; MF6 x 0.75 / 5P / 6H / 80 / 15 / 30 / 6 / 4.9 / 3; MF6 x 0.75 / 5P / 6G / 80 / 15 / 30 / 6 / 4.9 / 3; M8 x 1.25 / 5P / 6H / 90 / 18 / 35 / 8 / 6.2 / 3; M8 x 1.25 / 5P / 6G / 90 / 18 / 35 / 8 / 6.2 / 3; MF8 x 1.0 / 5P / 6H / 90 / 18 / 35 / 8 / 6.2 / 3; MF8 x 1.0 / 5P / 6G / 90 / 18 / 35 / 8 / 6.2 / 3; M10 x 1.5 / 5P / 6H / 100 / 20 / 39 / 10 / 8 / 3; M10 x 1.5 / 5P / 6G / 100 / 20 / 39 / 10 / 8 / 3; MF10 x 1.25 / 5P / 6H / 100 / 16 / 39 / 10 / 8 / 3; MF10 x 1.25 / 5P / 6G / 100 / 16 / 39 / 10 / 8 / 3; MF10 x 1.0 / 5P / 6H / 100 / 16 / 39 / 10 / 8 / 3; MF10 x 1.0 / 5P / 6G / 100 / 16 / 39 / 10 / 8 / 3; M12 x 1.75 / 5P / 6H / 110 / 24 / 53 / 9 / 7 / 3; M12 x 1.75 / 5P / 6G / 110 / 24 / 53 / 9 / 7 / 3; MF12 x 1.5 / 5P / 6H / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.5 / 5P / 6G / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.25 / 5P / 6H / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.25 / 5P / 6G / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.0 / 5P / 6H / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.0 / 5P / 6G / 100 / 22 / 48 / 9 / 7 / 3; M14 x 2.0 / 5P / 6H / 110 / 26 / 53 / 11 / 9 / 3; M14 x 2.0 / 5P / 6G / 110 / 26 / 53 / 11 / 9 / 3; MF14 x 1.5 / 5P / 6H / 100 / 22 / 48 / 11 / 9 / 3; MF14 x 1.5 / 5P / 6G / 100 / 22 / 48 / 11 / 9 / 3; MF14 x 1.0 / 5P / 6H / 100 / 22 / 48 / 11 / 9 / 3; MF14 x 1.0 / 5P / 6G / 100 / 22 / 48 / 11 / 9 / 3; M16 x 2.0 / 5P / 6H / 110 / 27 / 53 / 12 / 9 / 3; M16 x 2.0 / 5P / 6G / 110 / 27 / 53 / 12 / 9 / 3; MF16 x 1.5 / 5P / 6H / 100 / 22 / 48 / 12 / 9 / 3; MF16 x 1.5 / 5P / 6G / 100 / 22 / 48 / 12 / 9 / 3; MF16 x 1.0 / 5P / 6H / 100 / 22 / 48 / 12 / 9 / 3; MF16 x 1.0 / 5P / 6G / 100 / 22 / 48 / 12 / 9 / 3
0307-895 | JIS solid-carbide forming taps
Geometry reference: JIS layout; tolerance to selected thread drawing; Coolant direction: No internal coolant specified; Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / flute-lobe count (mm except thread/limit/count): M1×0.25 / RH4 / 4P / 38 / 4.5 / not specified / 3 / 2.5 / 3 / not specified; M1×0.25 / RH4 / 2P / 37 / 3.5 / not specified / 3 / 2.5 / 3 / not specified; M1.2×0.25 / RH4 / 4P / 38 / 4.5 / not specified / 3 / 2.5 / 3 / not specified; M1.2×0.25 / RH4 / 2P / 37 / 3.5 / not specified / 3 / 2.5 / 3 / not specified; M1.4×0.3 / RH4 / 4P / 38 / 6.5 / not specified / 3 / 2.5 / 3 / not specified; M1.4×0.3 / RH4 / 2P / 37 / 6.5 / not specified / 3 / 2.5 / 3 / not specified; M1.6×0.35 / RH5 / 4P / 38 / 8 / not specified / 3 / 2.5 / 3 / not specified; M1.6×0.35 / RH5 / 2P / 36.5 / 8 / not specified / 3 / 2.5 / 3 / not specified; M2×0.4 / RH5 / 4P / 49 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2×0.4 / RH5 / 2P / 47.5 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 4P / 49 / 13 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 2P / 47.5 / 13 / not specified / 3 / 2.5 / 3 / not specified; M3×0.5 / RH6 / 4P / 50 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 2P / 48 / 16 / not specified / 4 / 3.2 / 6 / not specified; M4×0.7 / RH7 / 4P / 54 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 2P / 52 / 18 / not specified / 5 / 4 / 7 / not specified; M5×0.8 / RH7 / 4P / 62 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M5×0.8 / RH7 / 2P / 59.5 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M6×1 / RH7 / 4P / 62 / 19 / 10 / 6 / 4.5 / 7 / 2; M6×1 / RH7 / 2P / 62 / 19 / 10 / 6 / 4.5 / 7 / 2; M8×1.25 / RH7 / 4P / 75 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1.25 / RH7 / 2P / 75 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1 / RH7 / 4P / 75 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1 / RH7 / 2P / 75 / 13 / not specified / 6.2 / 5 / 8 / 3; M10×1.5 / RH8 / 4P / 75 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.5 / RH8 / 2P / 75 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.25 / RH7 / 4P / 75 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.25 / RH7 / 2P / 75 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1 / RH7 / 4P / 75 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1 / RH7 / 2P / 75 / 15 / not specified / 7 / 5.5 / 8 / 6; M12×1.75 / RH9 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.75 / RH9 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.5 / RH8 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.5 / RH8 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.25 / RH7 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.25 / RH7 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1 / RH7 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1 / RH7 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M14×2 / RH10 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×2 / RH10 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.5 / RH8 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.5 / RH8 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.25 / RH7 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.25 / RH7 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1 / RH7 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1 / RH7 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M16×2 / RH10 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×2 / RH10 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.5 / RH8 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.5 / RH8 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.25 / RH7 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.25 / RH7 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1 / RH7 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1 / RH7 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6
0307-896 | JIS carbide forming taps with internal coolant
Geometry reference: JIS layout; tolerance to selected thread drawing; Coolant direction: Side and centre outlets paired with individual rows; Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / coolant route / flute-lobe count (mm except thread/limit/count): M6×1 / RH7 / 4P / 62 / 19 / 10 / 6 / 4.5 / 7 / Side C / 2; M6×1 / RH7 / 2P / 62 / 19 / 10 / 6 / 4.5 / 7 / Center Z / 2; M8×1.25 / RH7 / 4P / 75 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1.25 / RH7 / 2P / 75 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M8×1 / RH7 / 4P / 75 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1 / RH7 / 2P / 75 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M10×1.5 / RH8 / 4P / 75 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.5 / RH8 / 2P / 75 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1.25 / RH7 / 4P / 75 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.25 / RH7 / 2P / 75 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1 / RH7 / 4P / 75 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1 / RH7 / 2P / 75 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M12×1.75 / RH9 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.75 / RH9 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.5 / RH8 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.5 / RH8 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.25 / RH7 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.25 / RH7 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1 / RH7 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1 / RH7 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M14×2 / RH10 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×2 / RH10 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1.5 / RH8 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1.5 / RH8 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1.25 / RH7 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1.25 / RH7 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1 / RH7 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1 / RH7 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M16×2 / RH10 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×2 / RH10 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1.5 / RH8 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1.5 / RH8 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1.25 / RH7 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1.25 / RH7 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1 / RH7 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1 / RH7 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6
0307-897 | Long-shank JIS carbide forming taps
Geometry reference: JIS layout; tolerance to selected thread drawing; Coolant direction: No internal coolant specified; Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / flute-lobe count (mm except thread/limit/count): M2×0.4 / RH5 / 4P / 80 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2×0.4 / RH5 / 2P / 78 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2×0.4 / RH5 / 4P / 100 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2×0.4 / RH5 / 2P / 98 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2×0.4 / RH5 / 4P / 120 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2×0.4 / RH5 / 2P / 118 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 4P / 80 / 13 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 2P / 78 / 13 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 4P / 100 / 13 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 2P / 98 / 13 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 4P / 120 / 13 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 2P / 118 / 13 / not specified / 3 / 2.5 / 3 / not specified; M3×0.5 / RH6 / 4P / 80 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 2P / 78 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 4P / 100 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 2P / 98 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 4P / 120 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 2P / 118 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 4P / 150 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 2P / 148 / 16 / not specified / 4 / 3.2 / 6 / not specified; M4×0.7 / RH7 / 4P / 80 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 2P / 78 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 4P / 100 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 2P / 98 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 4P / 120 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 2P / 118 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 4P / 150 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 2P / 148 / 18 / not specified / 5 / 4 / 7 / not specified; M5×0.8 / RH7 / 4P / 80 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M5×0.8 / RH7 / 2P / 78 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M5×0.8 / RH7 / 4P / 100 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M5×0.8 / RH7 / 2P / 98 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M5×0.8 / RH7 / 4P / 120 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M5×0.8 / RH7 / 2P / 118 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M5×0.8 / RH7 / 4P / 150 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M6×1 / RH7 / 2P / 80 / 19 / 10 / 6 / 4.5 / 7 / 2; M6×1 / RH7 / 2P / 100 / 19 / 10 / 6 / 4.5 / 7 / 2; M6×1 / RH7 / 2P / 120 / 19 / 10 / 6 / 4.5 / 7 / 2; M6×1 / RH7 / 2P / 150 / 19 / 10 / 6 / 4.5 / 7 / 2; M8×1.25 / RH7 / 2P / 100 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1.25 / RH7 / 2P / 120 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1.25 / RH7 / 2P / 150 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1 / RH7 / 2P / 100 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1 / RH7 / 2P / 120 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1 / RH7 / 2P / 150 / 13 / not specified / 6.2 / 5 / 8 / 3; M10×1.5 / RH8 / 2P / 100 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.5 / RH8 / 2P / 120 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.5 / RH8 / 2P / 150 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.25 / RH7 / 2P / 100 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.25 / RH7 / 2P / 120 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.25 / RH7 / 2P / 150 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1 / RH7 / 2P / 100 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1 / RH7 / 2P / 120 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1 / RH7 / 2P / 150 / 15 / not specified / 7 / 5.5 / 8 / 6; M12×1.75 / RH9 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.75 / RH9 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.75 / RH9 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.5 / RH8 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.5 / RH8 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.5 / RH8 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.25 / RH7 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.25 / RH7 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.25 / RH7 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1 / RH7 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1 / RH7 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1 / RH7 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M14×2 / RH10 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×2 / RH10 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.5 / RH8 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.5 / RH8 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.25 / RH7 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.25 / RH7 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1 / RH7 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1 / RH7 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / 6; M16×2 / RH10 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×2 / RH10 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.5 / RH8 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.5 / RH8 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.25 / RH7 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.25 / RH7 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1 / RH7 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1 / RH7 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / 6
0307-898 | Long-shank JIS forming taps with internal coolant
Geometry reference: JIS layout; tolerance to selected thread drawing; Coolant direction: Side and centre outlets paired with individual rows; Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / coolant route / flute-lobe count (mm except thread/limit/count): M6×1 / RH7 / 4P / 80 / 19 / 10 / 6 / 4.5 / 7 / Side C / 2; M6×1 / RH7 / 2P / 80 / 19 / 10 / 6 / 4.5 / 7 / Center Z / 2; M6×1 / RH7 / 4P / 100 / 19 / 10 / 6 / 4.5 / 7 / Side C / 2; M6×1 / RH7 / 2P / 100 / 19 / 10 / 6 / 4.5 / 7 / Center Z / 2; M6×1 / RH7 / 4P / 120 / 19 / 10 / 6 / 4.5 / 7 / Side C / 2; M6×1 / RH7 / 2P / 120 / 19 / 10 / 6 / 4.5 / 7 / Center Z / 2; M6×1 / RH7 / 4P / 150 / 19 / 10 / 6 / 4.5 / 7 / Side C / 2; M6×1 / RH7 / 2P / 150 / 19 / 10 / 6 / 4.5 / 7 / Center Z / 2; M8×1.25 / RH7 / 4P / 100 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1.25 / RH7 / 2P / 100 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M8×1.25 / RH7 / 4P / 120 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1.25 / RH7 / 2P / 120 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M8×1.25 / RH7 / 4P / 150 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1.25 / RH7 / 2P / 150 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M8×1 / RH7 / 4P / 100 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1 / RH7 / 2P / 100 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M8×1 / RH7 / 4P / 120 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1 / RH7 / 2P / 120 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M8×1 / RH7 / 4P / 150 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1 / RH7 / 2P / 150 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M10×1.5 / RH8 / 4P / 100 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.5 / RH8 / 2P / 100 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1.5 / RH8 / 4P / 120 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.5 / RH8 / 2P / 120 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1.5 / RH8 / 4P / 150 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.5 / RH8 / 2P / 150 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1.25 / RH7 / 4P / 100 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.25 / RH7 / 2P / 100 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1.25 / RH7 / 4P / 120 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.25 / RH7 / 2P / 120 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1.25 / RH7 / 4P / 150 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.25 / RH7 / 2P / 150 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1 / RH7 / 4P / 100 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1 / RH7 / 2P / 100 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1 / RH7 / 4P / 120 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1 / RH7 / 2P / 120 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1 / RH7 / 4P / 150 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1 / RH7 / 2P / 150 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M12×1.75 / RH9 / 4P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.75 / RH9 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.75 / RH9 / 4P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.75 / RH9 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.75 / RH9 / 4P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.75 / RH9 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.5 / RH8 / 4P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.5 / RH8 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.5 / RH8 / 4P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.5 / RH8 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.5 / RH8 / 4P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.5 / RH8 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.25 / RH7 / 4P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.25 / RH7 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.25 / RH7 / 4P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.25 / RH7 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.25 / RH7 / 4P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.25 / RH7 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1 / RH7 / 4P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1 / RH7 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1 / RH7 / 4P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1 / RH7 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1 / RH7 / 4P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1 / RH7 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M14×2 / RH10 / 4P / 120 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×2 / RH10 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×2 / RH10 / 4P / 150 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×2 / RH10 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1.5 / RH8 / 4P / 120 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1.5 / RH8 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1.5 / RH8 / 4P / 150 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1.5 / RH8 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1.25 / RH7 / 4P / 120 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1.25 / RH7 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1.25 / RH7 / 4P / 150 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1.25 / RH7 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1 / RH7 / 4P / 120 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1 / RH7 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1 / RH7 / 4P / 150 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1 / RH7 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M16×2 / RH10 / 4P / 120 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×2 / RH10 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×2 / RH10 / 4P / 150 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×2 / RH10 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1.5 / RH8 / 4P / 120 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1.5 / RH8 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1.5 / RH8 / 4P / 150 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1.5 / RH8 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1.25 / RH7 / 4P / 120 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1.25 / RH7 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1.25 / RH7 / 4P / 150 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1.25 / RH7 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1 / RH7 / 4P / 120 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1 / RH7 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1 / RH7 / 4P / 150 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1 / RH7 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6
0307-899 | DIN-layout solid-carbide forming taps
Geometry reference: DIN layout; tolerance to selected thread drawing; Coolant direction: No internal coolant specified; Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk (mm except thread/limit/count): M4×0.7 / RH7 / 4P / 63 / 9 / 12 / 4.5 / 3.4 / 6; M4×0.7 / RH7 / 2.5P / 63 / 9 / 12 / 4.5 / 3.4 / 6; M5×0.8 / RH7 / 4P / 70 / 10 / 15 / 6 / 4.9 / 8; M5×0.8 / RH7 / 2.5P / 70 / 10 / 15 / 6 / 4.9 / 8; M6×1 / RH7 / 4P / 80 / 10 / 20 / 6 / 4.9 / 8; M6×1 / RH7 / 2.5P / 80 / 10 / 20 / 6 / 4.9 / 8; M7×1 / RH7 / 4P / 80 / 10 / 20 / 7 / 5.5 / 8; M7×1 / RH7 / 2.5P / 80 / 10 / 20 / 7 / 5.5 / 8; M8×1.25 / RH7 / 4P / 90 / 13 / 22 / 8 / 6.2 / 9; M8×1.25 / RH7 / 2.5P / 90 / 13 / 22 / 8 / 6.2 / 9; M8×1 / RH7 / 4P / 90 / 13 / 22 / 8 / 6.2 / 9; M8×1 / RH7 / 2.5P / 90 / 13 / 22 / 8 / 6.2 / 9; M10×1.5 / RH8 / 4P / 100 / 15 / 24 / 10 / 8 / 11; M10×1.5 / RH8 / 2.5P / 100 / 15 / 24 / 10 / 8 / 11; M10×1.25 / RH7 / 4P / 100 / 15 / 24 / 10 / 8 / 11; M10×1.25 / RH7 / 2.5P / 100 / 15 / 24 / 10 / 8 / 11; M10×1 / RH7 / 4P / 100 / 15 / 24 / 10 / 8 / 11; M10×1 / RH7 / 2.5P / 100 / 15 / 24 / 10 / 8 / 11; M12×1.75 / RH9 / 4P / 110 / 17 / 32 / 9 / 7 / 10; M12×1.75 / RH9 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10; M12×1.5 / RH8 / 4P / 110 / 17 / 32 / 9 / 7 / 10; M12×1.5 / RH8 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10; M12×1.25 / RH7 / 4P / 110 / 17 / 32 / 9 / 7 / 10; M12×1.25 / RH7 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10; M12×1 / RH7 / 4P / 110 / 17 / 32 / 9 / 7 / 10; M12×1 / RH7 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10; M14×2 / RH10 / 4P / 110 / 20 / 33 / 11 / 9 / 12; M14×2 / RH10 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12; M14×1.5 / RH8 / 4P / 110 / 20 / 33 / 11 / 9 / 12; M14×1.5 / RH8 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12; M14×1.25 / RH7 / 4P / 110 / 20 / 33 / 11 / 9 / 12; M14×1.25 / RH7 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12; M14×1 / RH7 / 4P / 110 / 20 / 33 / 11 / 9 / 12; M14×1 / RH7 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12; M16×2 / RH10 / 4P / 110 / 20 / 34 / 12 / 9 / 12; M16×2 / RH10 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12; M16×1.5 / RH8 / 4P / 110 / 20 / 34 / 12 / 9 / 12; M16×1.5 / RH8 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12; M16×1.25 / RH7 / 4P / 110 / 20 / 34 / 12 / 9 / 12; M16×1.25 / RH7 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12; M16×1 / RH7 / 4P / 110 / 20 / 34 / 12 / 9 / 12; M16×1 / RH7 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12; M18×2.5 / RH10 / 4P / 125 / 25 / 36 / 14 / 11 / 14; M18×2.5 / RH10 / 2.5P / 125 / 25 / 36 / 14 / 11 / 14; M18×2 / RH10 / 4P / 125 / 25 / 36 / 14 / 11 / 14; M18×2 / RH10 / 2.5P / 125 / 25 / 36 / 14 / 11 / 14; M18×1.5 / RH8 / 4P / 125 / 25 / 36 / 14 / 11 / 14; M18×1.5 / RH8 / 2.5P / 125 / 25 / 36 / 14 / 11 / 14; M20×2.5 / RH10 / 4P / 140 / 25 / 44 / 16 / 12 / 15; M20×2.5 / RH10 / 2.5P / 140 / 25 / 44 / 16 / 12 / 15; M20×2 / RH10 / 4P / 140 / 25 / 44 / 16 / 12 / 15; M20×2 / RH10 / 2.5P / 140 / 25 / 44 / 16 / 12 / 15; M20×1.5 / RH8 / 4P / 140 / 25 / 44 / 16 / 12 / 15; M20×1.5 / RH8 / 2.5P / 140 / 25 / 44 / 16 / 12 / 15; M22×2.5 / RH10 / 4P / 140 / 25 / 44 / 18 / 14.5 / 17; M22×2.5 / RH10 / 2.5P / 140 / 25 / 44 / 18 / 14.5 / 17; M22×2 / RH10 / 4P / 140 / 25 / 44 / 18 / 14.5 / 17; M22×2 / RH10 / 2.5P / 140 / 25 / 44 / 18 / 14.5 / 17; M22×1.5 / RH8 / 4P / 140 / 25 / 44 / 18 / 14.5 / 17; M22×1.5 / RH8 / 2.5P / 140 / 25 / 44 / 18 / 14.5 / 17; M24×3 / RH12 / 4P / 160 / 30 / 48 / 18 / 14.5 / 17; M24×3 / RH12 / 2.5P / 160 / 30 / 48 / 18 / 14.5 / 17; M24×2.5 / RH10 / 4P / 160 / 30 / 48 / 18 / 14.5 / 17; M24×2.5 / RH10 / 2.5P / 160 / 30 / 48 / 18 / 14.5 / 17; M24×2 / RH10 / 4P / 160 / 30 / 48 / 18 / 14.5 / 17; M24×2 / RH10 / 2.5P / 160 / 30 / 48 / 18 / 14.5 / 17; M27×3 / RH10 / 4P / 160 / 30 / 48 / 20 / 16 / 19; M27×3 / RH10 / 2.5P / 160 / 30 / 48 / 20 / 16 / 19; M27×2.5 / RH10 / 4P / 160 / 30 / 48 / 20 / 16 / 19; M27×2.5 / RH10 / 2.5P / 160 / 30 / 48 / 20 / 16 / 19; M27×2 / RH10 / 4P / 160 / 30 / 48 / 20 / 16 / 19; M27×2 / RH10 / 2.5P / 160 / 30 / 48 / 20 / 16 / 19; M30×3.5 / RH13 / 4P / 180 / 35 / 53 / 22 / 18 / 21; M30×3.5 / RH13 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21; M30×3 / RH12 / 4P / 180 / 35 / 53 / 22 / 18 / 21; M30×3 / RH12 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21; M30×2.5 / RH10 / 4P / 180 / 35 / 53 / 22 / 18 / 21; M30×2.5 / RH10 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21; M30×2 / RH10 / 4P / 180 / 35 / 53 / 22 / 18 / 21; M30×2 / RH10 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21
0307-900 | DIN-layout carbide forming taps with internal coolant
Geometry reference: DIN layout; tolerance to selected thread drawing; Coolant direction: Side and centre outlets paired with individual rows; Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / coolant route (mm except thread/limit/count): M4×0.7 / RH7 / 4P / 63 / 9 / 12 / 4.5 / 3.4 / 6 / Side C; M4×0.7 / RH7 / 2.5P / 63 / 9 / 12 / 4.5 / 3.4 / 6 / Center Z; M5×0.8 / RH7 / 4P / 70 / 10 / 15 / 6 / 4.9 / 8 / Side C; M5×0.8 / RH7 / 2.5P / 70 / 10 / 15 / 6 / 4.9 / 8 / Center Z; M6×1 / RH7 / 4P / 80 / 10 / 20 / 6 / 4.9 / 8 / Side C; M6×1 / RH7 / 2.5P / 80 / 10 / 20 / 6 / 4.9 / 8 / Center Z; M7×1 / RH7 / 4P / 80 / 10 / 20 / 7 / 5.5 / 8 / Side C; M7×1 / RH7 / 2.5P / 80 / 10 / 20 / 7 / 5.5 / 8 / Center Z; M8×1.25 / RH7 / 4P / 90 / 13 / 22 / 8 / 6.2 / 9 / Side C; M8×1.25 / RH7 / 2.5P / 90 / 13 / 22 / 8 / 6.2 / 9 / Center Z; M8×1 / RH7 / 4P / 90 / 13 / 22 / 8 / 6.2 / 9 / Side C; M8×1 / RH7 / 2.5P / 90 / 13 / 22 / 8 / 6.2 / 9 / Center Z; M10×1.5 / RH8 / 4P / 100 / 15 / 24 / 10 / 8 / 11 / Side C; M10×1.5 / RH8 / 2.5P / 100 / 15 / 24 / 10 / 8 / 11 / Center Z; M10×1.25 / RH7 / 4P / 100 / 15 / 24 / 10 / 8 / 11 / Side C; M10×1.25 / RH7 / 2.5P / 100 / 15 / 24 / 10 / 8 / 11 / Center Z; M10×1 / RH7 / 4P / 100 / 15 / 24 / 10 / 8 / 11 / Side C; M10×1 / RH7 / 2.5P / 100 / 15 / 24 / 10 / 8 / 11 / Center Z; M12×1.75 / RH9 / 4P / 110 / 17 / 32 / 9 / 7 / 10 / Side C; M12×1.75 / RH9 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10 / Center Z; M12×1.5 / RH8 / 4P / 110 / 17 / 32 / 9 / 7 / 10 / Side C; M12×1.5 / RH8 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10 / Center Z; M12×1.25 / RH7 / 4P / 110 / 17 / 32 / 9 / 7 / 10 / Side C; M12×1.25 / RH7 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10 / Center Z; M12×1 / RH7 / 4P / 110 / 17 / 32 / 9 / 7 / 10 / Side C; M12×1 / RH7 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10 / Center Z; M14×2 / RH10 / 4P / 110 / 20 / 33 / 11 / 9 / 12 / Side C; M14×2 / RH10 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12 / Center Z; M14×1.5 / RH8 / 4P / 110 / 20 / 33 / 11 / 9 / 12 / Side C; M14×1.5 / RH8 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12 / Center Z; M14×1.25 / RH7 / 4P / 110 / 20 / 33 / 11 / 9 / 12 / Side C; M14×1.25 / RH7 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12 / Center Z; M14×1 / RH7 / 4P / 110 / 20 / 33 / 11 / 9 / 12 / Side C; M14×1 / RH7 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12 / Center Z; M16×2 / RH10 / 4P / 110 / 20 / 34 / 12 / 9 / 12 / Side C; M16×2 / RH10 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12 / Center Z; M16×1.5 / RH8 / 4P / 110 / 20 / 34 / 12 / 9 / 12 / Side C; M16×1.5 / RH8 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12 / Center Z; M16×1.25 / RH7 / 4P / 110 / 20 / 34 / 12 / 9 / 12 / Side C; M16×1.25 / RH7 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12 / Center Z; M16×1 / RH7 / 4P / 110 / 20 / 34 / 12 / 9 / 12 / Side C; M16×1 / RH7 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12 / Center Z; M18×2.5 / RH10 / 4P / 125 / 25 / 36 / 14 / 11 / 14 / Side C; M18×2.5 / RH10 / 2.5P / 125 / 25 / 36 / 14 / 11 / 14 / Center Z; M18×2 / RH10 / 4P / 125 / 25 / 36 / 14 / 11 / 14 / Side C; M18×2 / RH10 / 2.5P / 125 / 25 / 36 / 14 / 11 / 14 / Center Z; M18×1.5 / RH8 / 4P / 125 / 25 / 36 / 14 / 11 / 14 / Side C; M18×1.5 / RH8 / 2.5P / 125 / 25 / 36 / 14 / 11 / 14 / Center Z; M20×2.5 / RH10 / 4P / 140 / 25 / 44 / 16 / 12 / 15 / Side C; M20×2.5 / RH10 / 2.5P / 140 / 25 / 44 / 16 / 12 / 15 / Center Z; M20×2 / RH10 / 4P / 140 / 25 / 44 / 16 / 12 / 15 / Side C; M20×2 / RH10 / 2.5P / 140 / 25 / 44 / 16 / 12 / 15 / Center Z; M20×1.5 / RH8 / 4P / 140 / 25 / 44 / 16 / 12 / 15 / Side C; M20×1.5 / RH8 / 2.5P / 140 / 25 / 44 / 16 / 12 / 15 / Center Z; M22×2.5 / RH10 / 4P / 140 / 25 / 44 / 18 / 14.5 / 17 / Side C; M22×2.5 / RH10 / 2.5P / 140 / 25 / 44 / 18 / 14.5 / 17 / Center Z; M22×2 / RH10 / 4P / 140 / 25 / 44 / 18 / 14.5 / 17 / Side C; M22×2 / RH10 / 2.5P / 140 / 25 / 44 / 18 / 14.5 / 17 / Center Z; M22×1.5 / RH8 / 4P / 140 / 25 / 44 / 18 / 14.5 / 17 / Side C; M22×1.5 / RH8 / 2.5P / 140 / 25 / 44 / 18 / 14.5 / 17 / Center Z; M24×3 / RH12 / 4P / 160 / 30 / 48 / 18 / 14.5 / 17 / Side C; M24×3 / RH12 / 2.5P / 160 / 30 / 48 / 18 / 14.5 / 17 / Center Z; M24×2.5 / RH10 / 4P / 160 / 30 / 48 / 18 / 14.5 / 17 / Side C; M24×2.5 / RH10 / 2.5P / 160 / 30 / 48 / 18 / 14.5 / 17 / Center Z; M24×2 / RH10 / 4P / 160 / 30 / 48 / 18 / 14.5 / 17 / Side C; M24×2 / RH10 / 2.5P / 160 / 30 / 48 / 18 / 14.5 / 17 / Center Z; M27×3 / RH10 / 4P / 160 / 30 / 48 / 20 / 16 / 19 / Side C; M27×3 / RH10 / 2.5P / 160 / 30 / 48 / 20 / 16 / 19 / Center Z; M27×2.5 / RH10 / 4P / 160 / 30 / 48 / 20 / 16 / 19 / Side C; M27×2.5 / RH10 / 2.5P / 160 / 30 / 48 / 20 / 16 / 19 / Center Z; M27×2 / RH10 / 4P / 160 / 30 / 48 / 20 / 16 / 19 / Side C; M27×2 / RH10 / 2.5P / 160 / 30 / 48 / 20 / 16 / 19 / Center Z; M30×3.5 / RH13 / 4P / 180 / 35 / 53 / 22 / 18 / 21 / Side C; M30×3.5 / RH13 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21 / Center Z; M30×3 / RH12 / 4P / 180 / 35 / 53 / 22 / 18 / 21 / Side C; M30×3 / RH12 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21 / Center Z; M30×2.5 / RH10 / 4P / 180 / 35 / 53 / 22 / 18 / 21 / Side C; M30×2.5 / RH10 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21 / Center Z; M30×2 / RH10 / 4P / 180 / 35 / 53 / 22 / 18 / 21 / Side C; M30×2 / RH10 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21 / Center Z
0307-901 | DIN-layout solid-carbide cutting taps
Geometry reference: DIN layout; tolerance to selected thread drawing; Coolant direction: No internal coolant specified; Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / flute-lobe count (mm except thread/limit/count): M4×0.7 / P2 / 2.5P / 63 / 13 / 8 / 4.5 / 3.4 / 6 / 3; M5×0.8 / P2 / 2.5P / 70 / 15 / 10 / 6 / 4.9 / 8 / 3; M6×1 / P2 / 2.5P / 80 / 17 / 13 / 6 / 4.9 / 8 / 3; M7×1 / P3 / 2.5P / 80 / 17 / 13 / 7 / 5.5 / 8 / 3; M8×1 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / 3; M8×1.25 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / 3; M10×1.5 / P4 / 2.5P / 90 / 18 / 21 / 10 / 8 / 11 / 3; M10×1.25 / P3 / 2.5P / 90 / 18 / 21 / 10 / 8 / 11 / 3; M12×1.75 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / 3; M12×1.5 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / 3; M12×1.25 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / 3; M14×2 / P5 / 2.5P / 110 / 26 / not specified / 11 / 9 / 12 / 3; M14×1.5 / P4 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / 3; M14×1.25 / P3 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / 3; M16×2 / P5 / 2.5P / 110 / 27 / not specified / 12 / 9 / 12 / 3; M16×1.5 / P4 / 2.5P / 110 / 22 / not specified / 12 / 9 / 12 / 3; M16×1.25 / P3 / 2.5P / 110 / 18 / not specified / 12 / 9 / 12 / 3; M18×2.5 / P6 / 2.5P / 125 / 30 / not specified / 14 / 11 / 14 / 4; M18×2 / P5 / 2.5P / 125 / 26 / not specified / 14 / 11 / 14 / 4; M18×1.5 / P4 / 2.5P / 125 / 25 / not specified / 14 / 11 / 14 / 4; M20×2.5 / P6 / 2.5P / 140 / 32 / not specified / 16 / 12 / 15 / 4; M20×2 / P5 / 2.5P / 140 / 27 / not specified / 16 / 12 / 15 / 4; M20×1.5 / P4 / 2.5P / 140 / 25 / not specified / 16 / 12 / 15 / 4; M22×2.5 / P6 / 2.5P / 140 / 32 / not specified / 18 / 14.5 / 17 / 4; M22×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / 4; M22×1.5 / P4 / 2.5P / 140 / 25 / not specified / 18 / 14.5 / 17 / 4; M24×3 / P6 / 2.5P / 140 / 34 / not specified / 18 / 14.5 / 17 / 4; M24×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / 4; M24×1.5 / P4 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / 4; M27×3 / P6 / 2.5P / 160 / 36 / not specified / 20 / 16 / 19 / 4; M30×3.5 / P7 / 2.5P / 180 / 40 / not specified / 22 / 18 / 21 / 4
0307-902 | DIN-layout spiral cutting taps with internal coolant
Geometry reference: DIN layout; tolerance to selected thread drawing; Coolant direction: Side and centre outlets paired with individual rows; Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / coolant route / flute-lobe count (mm except thread/limit/count): M4×0.7 / P2 / 2.5P / 63 / 13 / 8 / 4.5 / 3.4 / 6 / Side C / 3; M4×0.7 / P2 / 2.5P / 63 / 13 / 8 / 4.5 / 3.4 / 6 / Center Z / 3; M5×0.8 / P2 / 2.5P / 70 / 15 / 8 / 6 / 4.9 / 8 / Side C / 3; M5×0.8 / P2 / 2.5P / 70 / 15 / 10 / 6 / 4.9 / 8 / Center Z / 3; M6×1 / P2 / 2.5P / 80 / 17 / 10 / 6 / 4.9 / 8 / Side C / 3; M6×1 / P2 / 2.5P / 80 / 17 / 13 / 6 / 4.9 / 8 / Center Z / 3; M7×1 / P3 / 2.5P / 80 / 17 / 13 / 7 / 5.5 / 8 / Side C / 3; M7×1 / P3 / 2.5P / 80 / 17 / 13 / 7 / 5.5 / 8 / Center Z / 3; M8×1 / P3 / 2.5P / 90 / 16 / 13 / 8 / 6.2 / 9 / Side C / 3; M8×1 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / Center Z / 3; M8×1.25 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / Side C / 3; M8×1.25 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / Center Z / 3; M10×1.5 / P4 / 2.5P / 100 / 18 / 21 / 10 / 8 / 11 / Side C / 3; M10×1.5 / P4 / 2.5P / 100 / 18 / 21 / 10 / 8 / 11 / Center Z / 3; M10×1.25 / P3 / 2.5P / 100 / 18 / 21 / 10 / 8 / 11 / Side C / 3; M10×1.25 / P3 / 2.5P / 100 / 18 / 21 / 10 / 8 / 11 / Center Z / 3; M12×1.75 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Side C / 3; M12×1.75 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Center Z / 3; M12×1.5 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Side C / 3; M12×1.5 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Center Z / 3; M12×1.25 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Side C / 3; M12×1.25 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Center Z / 3; M14×2 / P5 / 2.5P / 110 / 26 / not specified / 11 / 9 / 12 / Side C / 3; M14×2 / P5 / 2.5P / 110 / 26 / not specified / 11 / 9 / 12 / Center Z / 3; M14×1.5 / P4 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Side C / 3; M14×1.5 / P4 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Center Z / 3; M14×1.25 / P3 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Side C / 3; M14×1.25 / P3 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Center Z / 3; M16×2 / P5 / 2.5P / 110 / 27 / not specified / 12 / 9 / 12 / Side C / 3; M16×2 / P5 / 2.5P / 110 / 27 / not specified / 12 / 9 / 12 / Center Z / 3; M16×1.5 / P4 / 2.5P / 110 / 22 / not specified / 12 / 9 / 12 / Side C / 3; M16×1.5 / P4 / 2.5P / 110 / 22 / not specified / 12 / 9 / 12 / Center Z / 3; M16×1.25 / P3 / 2.5P / 110 / 18 / not specified / 12 / 9 / 12 / Side C / 3; M16×1.25 / P3 / 2.5P / 110 / 18 / not specified / 12 / 9 / 12 / Center Z / 3; M18×2.5 / P6 / 2.5P / 125 / 30 / not specified / 14 / 11 / 14 / Side C / 4; M18×2.5 / P6 / 2.5P / 125 / 30 / not specified / 14 / 11 / 14 / Center Z / 4; M18×2 / P5 / 2.5P / 125 / 26 / not specified / 14 / 11 / 14 / Side C / 4; M18×2 / P5 / 2.5P / 125 / 26 / not specified / 14 / 11 / 14 / Center Z / 4; M18×1.5 / P4 / 2.5P / 125 / 25 / not specified / 14 / 11 / 14 / Side C / 4; M18×1.5 / P4 / 2.5P / 125 / 25 / not specified / 14 / 11 / 14 / Center Z / 4; M20×2.5 / P6 / 2.5P / 140 / 32 / not specified / 16 / 12 / 15 / Side C / 4; M20×2.5 / P6 / 2.5P / 140 / 32 / not specified / 16 / 12 / 15 / Center Z / 4; M20×2 / P5 / 2.5P / 140 / 27 / not specified / 16 / 12 / 15 / Side C / 4; M20×2 / P5 / 2.5P / 140 / 27 / not specified / 16 / 12 / 15 / Center Z / 4; M20×1.5 / P4 / 2.5P / 140 / 25 / not specified / 16 / 12 / 15 / Side C / 4; M20×1.5 / P4 / 2.5P / 140 / 25 / not specified / 16 / 12 / 15 / Center Z / 4; M22×2.5 / P6 / 2.5P / 140 / 32 / not specified / 18 / 14.5 / 17 / Side C / 4; M22×2.5 / P6 / 2.5P / 140 / 32 / not specified / 18 / 14.5 / 17 / Center Z / 4; M22×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Side C / 4; M22×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Center Z / 4; M22×1.5 / P4 / 2.5P / 140 / 25 / not specified / 18 / 14.5 / 17 / Side C / 4; M22×1.5 / P4 / 2.5P / 140 / 25 / not specified / 18 / 14.5 / 17 / Center Z / 4; M24×3 / P6 / 2.5P / 140 / 34 / not specified / 18 / 14.5 / 17 / Side C / 4; M24×3 / P6 / 2.5P / 140 / 34 / not specified / 18 / 14.5 / 17 / Center Z / 4; M24×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Side C / 4; M24×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Center Z / 4; M24×1.5 / P4 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Side C / 4; M24×1.5 / P4 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Center Z / 4; M27×3 / P6 / 2.5P / 160 / 36 / not specified / 20 / 16 / 19 / Side C / 4; M27×3 / P6 / 2.5P / 160 / 36 / not specified / 20 / 16 / 19 / Center Z / 4; M30×3.5 / P7 / 2.5P / 180 / 40 / not specified / 22 / 18 / 21 / Side C / 4; M30×3.5 / P7 / 2.5P / 180 / 40 / not specified / 22 / 18 / 21 / Center Z / 4
0307-903 | JIS straight-flute carbide taps for cast iron
Geometry reference: JIS layout; tolerance to selected thread drawing; Coolant direction: No internal coolant specified; Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / flute-lobe count (mm except thread/limit/count): M5×0.8 / P3 / 2.5P / 62 / 16 / not specified / 5.5 / 4.5 / 7 / 3; M6×1 / P3 / 2.5P / 62 / 19 / 10 / 6 / 4.5 / 7 / 3; M8×1.25 / P4 / 2.5P / 75 / 22 / not specified / 6.2 / 5 / 8 / 3; M10×1.5 / P5 / 2.5P / 75 / 24 / not specified / 7 / 5.5 / 8 / 4; M10×1.25 / P4 / 2.5P / 75 / 24 / not specified / 7 / 5.5 / 8 / 4; M12×1.75 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / 4; M12×1.5 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / 4; M12×1.25 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / 4; M14×2 / P6 / 2.5P / 88 / 20 / not specified / 10.5 / 8 / 11 / 4; M14×1.5 / P5 / 2.5P / 88 / 20 / not specified / 10.5 / 8 / 11 / 4; M16×2 / P6 / 2.5P / 95 / 20 / not specified / 12.5 / 10 / 13 / 4; M16×1.5 / P5 / 2.5P / 95 / 20 / not specified / 12.5 / 10 / 13 / 4
0307-904 | JIS straight-flute carbide taps with internal coolant
Geometry reference: JIS layout; tolerance to selected thread drawing; Coolant direction: Side and centre outlets paired with individual rows; Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / coolant route / flute-lobe count (mm except thread/limit/count): M5×0.8 / P3 / 2.5P / 57 / 16 / not specified / 5.5 / 4.5 / 7 / Side C / 3; M5×0.8 / P3 / 2.5P / 57 / 16 / not specified / 5.5 / 4.5 / 7 / Center Z / 3; M6×1 / P3 / 2.5P / 62 / 19 / 10 / 6 / 4.5 / 7 / Side C / 3; M6×1 / P3 / 2.5P / 62 / 19 / 10 / 6 / 4.5 / 7 / Center Z / 3; M8×1.25 / P4 / 2.5P / 75 / 22 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1.25 / P4 / 2.5P / 75 / 22 / not specified / 6.2 / 5 / 8 / Center Z / 3; M10×1.5 / P5 / 2.5P / 75 / 24 / not specified / 7 / 5.5 / 8 / Side C / 4; M10×1.5 / P5 / 2.5P / 75 / 24 / not specified / 7 / 5.5 / 8 / Center Z / 4; M10×1.25 / P4 / 2.5P / 75 / 24 / not specified / 7 / 5.5 / 8 / Side C / 4; M10×1.25 / P4 / 2.5P / 75 / 24 / not specified / 7 / 5.5 / 8 / Center Z / 4; M12×1.75 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / Side C / 4; M12×1.75 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / Center Z / 4; M12×1.5 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / Side C / 4; M12×1.5 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / Center Z / 4; M12×1.25 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / Side C / 4; M12×1.25 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / Center Z / 4; M14×2 / P6 / 2.5P / 88 / 20 / not specified / 10.5 / 8 / 11 / Side C / 4; M14×2 / P6 / 2.5P / 88 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 4; M14×1.5 / P5 / 2.5P / 88 / 20 / not specified / 10.5 / 8 / 11 / Side C / 4; M14×1.5 / P5 / 2.5P / 88 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 4; M16×2 / P6 / 2.5P / 95 / 20 / not specified / 12.5 / 10 / 13 / Side C / 4; M16×2 / P6 / 2.5P / 95 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 4; M16×1.5 / P5 / 2.5P / 95 / 20 / not specified / 12.5 / 10 / 13 / Side C / 4; M16×1.5 / P5 / 2.5P / 95 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 4
0307-905 | DIN straight-flute carbide taps for cast iron
Geometry reference: DIN layout; tolerance to selected thread drawing; Coolant direction: No internal coolant specified; Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / flute-lobe count (mm except thread/limit/count): M5×0.8 / P2 / 2.5P / 70 / 15 / 10 / 6 / 4.9 / 8 / 3; M6×1 / P2 / 2.5P / 80 / 17 / 13 / 6 / 4.9 / 8 / 3; M7×1 / P3 / 2.5P / 80 / 17 / 13 / 7 / 5.5 / 8 / 3; M8×1 / P3 / 2.5P / 80 / 16 / 19 / 8 / 6.2 / 9 / 4; M8×1.25 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / 4; M10×1.5 / P4 / 2.5P / 90 / 18 / 21 / 10 / 8 / 11 / 4; M10×1.25 / P3 / 2.5P / 100 / 18 / 21 / 10 / 8 / 11 / 4; M12×1.75 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / 4; M12×1.5 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / 4; M12×1.25 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / 4; M14×2 / P5 / 2.5P / 110 / 26 / not specified / 11 / 9 / 12 / 4; M14×1.5 / P4 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / 4; M14×1.25 / P3 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / 4; M16×2 / P5 / 2.5P / 110 / 27 / not specified / 12 / 9 / 12 / 4; M16×1.5 / P4 / 2.5P / 110 / 22 / not specified / 12 / 9 / 12 / 4; M16×1.25 / P3 / 2.5P / 110 / 18 / not specified / 12 / 9 / 12 / 4; M18×2.5 / P6 / 2.5P / 125 / 30 / not specified / 14 / 11 / 14 / 4; M18×2 / P5 / 2.5P / 125 / 26 / not specified / 14 / 11 / 14 / 4; M18×1.5 / P4 / 2.5P / 125 / 25 / not specified / 14 / 11 / 14 / 4; M20×2.5 / P6 / 2.5P / 140 / 32 / not specified / 16 / 12 / 15 / 4; M20×2 / P5 / 2.5P / 140 / 27 / not specified / 16 / 12 / 15 / 4; M20×1.5 / P4 / 2.5P / 140 / 25 / not specified / 16 / 12 / 15 / 4; M22×2.5 / P6 / 2.5P / 140 / 32 / not specified / 18 / 14.5 / 17 / 4; M22×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / 4; M22×1.5 / P4 / 2.5P / 140 / 25 / not specified / 18 / 14.5 / 17 / 4; M24×3 / P6 / 2.5P / 140 / 34 / not specified / 18 / 14.5 / 17 / 4; M24×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / 4; M24×1.5 / P4 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / 4; M27×3 / P6 / 2.5P / 160 / 36 / not specified / 20 / 16 / 19 / 4; M30×3.5 / P7 / 2.5P / 180 / 40 / not specified / 22 / 18 / 21 / 4
0307-906 | DIN straight-flute carbide taps with internal coolant
Geometry reference: DIN layout; tolerance to selected thread drawing; Coolant direction: Side and centre outlets paired with individual rows; Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / coolant route / flute-lobe count (mm except thread/limit/count): M5×0.8 / P2 / 2.5P / 70 / 15 / 10 / 6 / 4.9 / 8 / Side C / 3; M5×0.8 / P2 / 2.5P / 70 / 15 / 10 / 6 / 4.9 / 8 / Center Z / 3; M6×1 / P2 / 2.5P / 80 / 17 / 13 / 6 / 4.9 / 8 / Side C / 3; M6×1 / P2 / 2.5P / 80 / 17 / 13 / 6 / 4.9 / 8 / Center Z / 3; M7×1 / P3 / 2.5P / 80 / 17 / 13 / 7 / 5.5 / 8 / Side C / 3; M7×1 / P3 / 2.5P / 80 / 17 / 13 / 7 / 5.5 / 8 / Center Z / 3; M8×1 / P3 / 2.5P / 80 / 16 / 19 / 8 / 6.2 / 9 / Side C / 4; M8×1 / P3 / 2.5P / 80 / 16 / 19 / 8 / 6.2 / 9 / Center Z / 4; M8×1.25 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / Side C / 4; M8×1.25 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / Center Z / 4; M10×1.5 / P4 / 2.5P / 90 / 18 / 21 / 10 / 8 / 11 / Side C / 4; M10×1.5 / P4 / 2.5P / 90 / 18 / 21 / 10 / 8 / 11 / Center Z / 4; M10×1.25 / P3 / 2.5P / 100 / 18 / 21 / 10 / 8 / 11 / Side C / 4; M10×1.25 / P3 / 2.5P / 100 / 18 / 21 / 10 / 8 / 11 / Center Z / 4; M12×1.75 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Side C / 4; M12×1.75 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Center Z / 4; M12×1.5 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Side C / 4; M12×1.5 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Center Z / 4; M12×1.25 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Side C / 4; M12×1.25 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Center Z / 4; M14×2 / P5 / 2.5P / 110 / 26 / not specified / 11 / 9 / 12 / Side C / 4; M14×2 / P5 / 2.5P / 110 / 26 / not specified / 11 / 9 / 12 / Center Z / 4; M14×1.5 / P4 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Side C / 4; M14×1.5 / P4 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Center Z / 4; M14×1.25 / P3 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Side C / 4; M14×1.25 / P3 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Center Z / 4; M16×2 / P5 / 2.5P / 110 / 27 / not specified / 12 / 9 / 12 / Side C / 4; M16×2 / P5 / 2.5P / 110 / 27 / not specified / 12 / 9 / 12 / Center Z / 4; M16×1.5 / P4 / 2.5P / 110 / 22 / not specified / 12 / 9 / 12 / Side C / 4; M16×1.5 / P4 / 2.5P / 110 / 22 / not specified / 12 / 9 / 12 / Center Z / 4; M16×1.25 / P3 / 2.5P / 110 / 18 / not specified / 12 / 9 / 12 / Side C / 4; M16×1.25 / P3 / 2.5P / 110 / 18 / not specified / 12 / 9 / 12 / Center Z / 4; M18×2.5 / P6 / 2.5P / 125 / 30 / not specified / 14 / 11 / 14 / Side C / 4; M18×2.5 / P6 / 2.5P / 125 / 30 / not specified / 14 / 11 / 14 / Center Z / 4; M18×2 / P5 / 2.5P / 125 / 26 / not specified / 14 / 11 / 14 / Side C / 4; M18×2 / P5 / 2.5P / 125 / 26 / not specified / 14 / 11 / 14 / Center Z / 4; M18×1.5 / P4 / 2.5P / 125 / 25 / not specified / 14 / 11 / 14 / Side C / 4; M18×1.5 / P4 / 2.5P / 125 / 25 / not specified / 14 / 11 / 14 / Center Z / 4; M20×2.5 / P6 / 2.5P / 140 / 32 / not specified / 16 / 12 / 15 / Side C / 4; M20×2.5 / P6 / 2.5P / 140 / 32 / not specified / 16 / 12 / 15 / Center Z / 4; M20×2 / P5 / 2.5P / 140 / 27 / not specified / 16 / 12 / 15 / Side C / 4; M20×2 / P5 / 2.5P / 140 / 27 / not specified / 16 / 12 / 15 / Center Z / 4; M20×1.5 / P4 / 2.5P / 140 / 25 / not specified / 16 / 12 / 15 / Side C / 4; M20×1.5 / P4 / 2.5P / 140 / 25 / not specified / 16 / 12 / 15 / Center Z / 4; M22×2.5 / P6 / 2.5P / 140 / 32 / not specified / 18 / 14.5 / 17 / Side C / 4; M22×2.5 / P6 / 2.5P / 140 / 32 / not specified / 18 / 14.5 / 17 / Center Z / 4; M22×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Side C / 4; M22×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Center Z / 4; M22×1.5 / P4 / 2.5P / 140 / 25 / not specified / 18 / 14.5 / 17 / Side C / 4; M22×1.5 / P4 / 2.5P / 140 / 25 / not specified / 18 / 14.5 / 17 / Center Z / 4; M24×3 / P6 / 2.5P / 140 / 34 / not specified / 18 / 14.5 / 17 / Side C / 4; M24×3 / P6 / 2.5P / 140 / 34 / not specified / 18 / 14.5 / 17 / Center Z / 4; M24×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Side C / 4; M24×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Center Z / 4; M24×1.5 / P4 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Side C / 4; M24×1.5 / P4 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Center Z / 4; M27×3 / P6 / 2.5P / 160 / 36 / not specified / 20 / 16 / 19 / Side C / 4; M27×3 / P6 / 2.5P / 160 / 36 / not specified / 20 / 16 / 19 / Center Z / 4; M30×3.5 / P7 / 2.5P / 180 / 40 / not specified / 22 / 18 / 21 / Side C / 4; M30×3.5 / P7 / 2.5P / 180 / 40 / not specified / 22 / 18 / 21 / Center Z / 4
0307-907 | Metric HSS round and hexagonal dies
Thread / die outside dimensions — units shown individually: M17×0.75 / 45×14; M21×0.75 / 45×14; M25×1 / 55×16; M30×2 / 65×18; M17×1 / 45×14; M21×1 / 45×14; M25×1.5 / 55×16; M30×3 / 65×18; M17×1.5 / 45×14; M21×1.5 / 45×14; M25×2 / 55×16; M30×3.5 / 65×25; M18×0.5 / 45×14; M21×2 / 45×14; M26×0.5 / 55×16; M32×1 / 65×18; M18×0.75 / 45×14; M22×0.5 / 55×16; M26×0.75 / 55×16; M32×1.5 / 65×18; M18×1 / 45×14; M22×0.75 / 55×16; M26×1 / 55×16; M32×3 / 65×18; M18×1.25 / 45×14; M22×1 / 55×16; M26×1.5 / 55×16; M33×1 / 65×18; M18×1.5 / 45×14; M22×1.5 / 55×16; M26×2 / 55×16; M33×1.5 / 65×18; M18×2 / 45×14; M22×2 / 55×16; M27×0.5 / 65×18; M33×2 / 65×18; M18×2.5 / 45×18; M22×2.5 / 55×22; M27×0.75 / 65×18; M33×3.5 / 65×25; M19×0.5 / 45×14; M23×0.5 / 55×16; M27×1 / 65×18; M34×1 / 65×18; M19×0.75 / 45×14; M23×0.75 / 55×16; M27×1.5 / 65×18; M34×1.5 / 65×18; M19×1 / 45×14; M23×1 / 55×16; M27×2 / 65×18; M34×2 / 65×18; M19×1.5 / 45×14; M23×1.5 / 55×16; M27×3 / 65×25; M34×3 / 65×25; M19×2 / 45×14; M23×2 / 55×16; M28×0.5 / 65×18; M35×1 / 65×18; M20×0.5 / 45×14; M24×0.5 / 55×16; M28×0.75 / 65×18; M35×1.5 / 65×18; M20×0.75 / 45×14; M24×0.75 / 55×16; M28×1 / 65×18; M35×2 / 65×18; M20×1 / 45×14; M24×1 / 55×16; M28×1.5 / 65×18; M35×3 / 65×25; M20×1.25 / 45×14; M24×1.5 / 55×16; M28×2 / 65×18; M36×1 / 65×18; M20×1.5 / 45×14; M24×2 / 55×16; M30×0.5 / 65×18; M36×1.5 / 65×18; M20×2 / 45×14; M24×3 / 55×22; M30×0.75 / 65×18; M36×2 / 65×18; M20×2.5 / 45×18; M25×0.5 / 55×16; M30×1 / 65×18; M36×3 / 65×25; M21×0.5 / 45×14; M25×0.75 / 55×16; M30×1.5 / 65×18; M36×4 / 65×25
0307-908 | Round dies with inch outside diameters
Thread / die outside dimensions — units shown individually: M2.3x0.4 / 1"; M2.5x0.45 / 13/16"; M2.5x0.45 / 1"; M2.6x0.45 / 13/16"; M2.6x0.45 / 1"; M3x0.5 / 13/16"; M3x0.5 / 1"; M3x0.6 / 13/16"; M3x0.6 / 1"; M3.5x0.6 / 13/16"; M3.5x0.6 / 1"; M4x0.5 / 13/16"; M4x0.5 / 1"; M4x0.7 / 13/16"; M4x0.7 / 1"; M4.5x0.5 / 13/16"; M4.5x0.5 / 1"; M4.5x0.75 / 13/16"; M4.5x0.75 / 1"; M5x0.5 / 13/16"; M5x0.5 / 1"; M5x0.8 / 13/16"; M5x0.8 / 1"; M5x0.9 / 13/16"; M5x0.9 / 1"; M6x0.5 / 13/16"; M6x0.5 / 1"; M6x0.75 / 13/16"; M6x0.75 / 1"; M6x1 / 13/16"; M6x1 / 1"; M6.3x1.0 / 1"; M7x0.75 / 1"; M7x1 / 1"; M8x0.75 / 1"; M8x1 / 1"; M8x1.25 / 1"; M9x1 / 1"; M9x1 / 1-1/2"; M9x1.25 / 1"; M9x1.25 / 1-1/2"; M10x0.75 / 1"; M10x0.75 / 1-1/2"; M10x1 / 1"; M10x1 / 1-1/2"; M10x1.25 / 1"; M10x1.25 / 1-1/2"; M10x1.5 / 1"; M10x1.5 / 1-1/2; M11x1 / 1; M11x1 / 1-1/2; M11x1.5 / 1"; M11x1.5 / 1-1/2"; M12x1 / 1"; M12x1 / 1-1/2"; M12x1.25 / 1"; M12x1.25 / 1-1/2"; M12x1.5 / 1-1/2"; M12x1.75 / 1-1/2"; M14x1 / 1-1/2"; M14x1.25 / 1-1/2"; M14x1.5 / 1-1/2"; M14x2 / 1-1/2"; M15x1.5 / 1-1/2"; M15x1.5 / 2"; M16x1 / 1-1/2"; M16x1 / 2"; M16x1.5 / 1-1/2"; M16x1.5 / 2"; M16x2 / 1-1/2"; M16x2 / 2"; M17x1.5 / 1-1/2"; M17x1.5 / 2"; M18x1.5 / 1-1/2"; M18x1.5 / 2"; M18x2 / 1-1/2"; M18x2 / 2"; M18x2.5 / 1-1/2"; M18x2.5 / 2"; M20x1.5 / 1-1/2"; M20x1.5 / 2"; M20x2 / 1-1/2"; M20x2 / 2"; M22x2.5 / 2"; M24x1.5 / 2"; M24x1.5 / 2-1/2"; M24x2 / 2"; M24x2 / 2-1/2"; M24x3 / 2-1/2"; M27x2 / 2-1/2"; M27x3 / 2-1/2"; M28x2 / 2-1/2"; M30x1.5 / 2-1/2"; M30x2 / 2-1/2"; M30x3 / 2-1/2"; M30x3.5 / 2-1/2"; M33x3 / 2-1/2"; M33x3.5 / 2-1/2"; M36x3 / 2-1/2"; M36x4 / 3"; M39x3 / 3"; M39x4 / 3"
0307-909 | BSW and BSF thread-cutting dies
Thread / die outside dimensions — units shown individually: 1/8-40BSW / 20x5mm; 3/16-24BSW / 20x7mm; 3/16-32BSF / 20x7mm; 1/4-20BSW / 25x9mm; 1/4-26BSF / 25x9mm; 5/16-18BSW / 25x9mm; 5/16-22BSF / 25x9mm; 3/8-18BSW / 30x11mm; 3/8-20BSF / 30x11mm; 7/16-14BSW / 30x11mm; 7/16-18BSF / 30x11mm; 1/2-12BSW / 38x14mm; 1/2-16BSF / 38x10mm; 9/16-12BSW / 38x14mm; 9/16-16BSF / 38x10mm; 5/8-11BSW / 45x18mm; 5/8-14BSF / 45x14mm; 11/16-11BSW / 45x18mm; 11/16-14BSF / 45x14mm; 3/4-10BSW / 45x18mm; 3/4-12BSF / 45x14mm; 7/8-9BSW / 55x22mm; 7/8-11BSF / 55x22mm; 1-8BSW / 55x22mm; 1-10BSF / 55x22mm; 1-1/8-7BSW / 65x25mm; 1-1/8-9BSF / 65x25mm; 1-1/4-7BSW / 65x25mm; 1-1/4-9BSF / 65x25mm; 1-1/2-6BSW / 75x30mm; 1-1/2-8BSF / 75x30mm; 1-3/4-5BSW / 90x36mm; 1-3/4-7BSF / 90x36mm; 2-4-1/2BSW / 90x36mm; 2-7BSF / 90x36mm; 2-1/4-4BSW / 105x36mm; 2-1/4-6BSF / 105x36mm; 2-1/2-4BSW / 120x36mm; 2-1/2-6BSF / 120x36mm; 2-3/4-3-1/2BSW / 120x36mm; 2-3/4-6BSF / 120x36mm
0307-910 | UNC, UNF and special unified dies
Thread / die outside dimensions — units shown individually: No.0-80UNF / 16x5mm; No.1-64UNC / 16x5mm; No.1-72UNF / 16x5mm; No.2-56UNC / 16x5mm; No.2-64UNF / 16x5mm; No.3-48UNC / 16x5mm; No.3-56UNF / 16x5mm; No.4-40UNC / 20x5mm; No.4-48UNF / 20x5mm; No.5-40UNC / 20x5mm; No.5-44UNF / 20x5mm; No.6-32UNC / 20x5mm; No.6-40UNF / 20x5mm; No.8-32UNC / 20x5mm; No.8-36UNF / 20x5mm; No.10-24UNC / 20x7mm; No.10-32UNF / 20x7mm; No.12-24UNC / 20x7mm; No.12-28UNF / 20x7mm; 1/4-20UNC / 20x7mm; 1/4-28UNF / 20x7mm; 5/16-18UNC / 25x9mm; 5/16-24UNF / 25x9mm; 3/8-16UNC / 30x11mm; 3/8-24UNF / 30x11mm; 7/16-14UNC / 30x11mm; 7/16-20UNF / 30x11mm; 1/2-13UNC / 38x14mm; 1/2-20UNF / 38x10mm; 9/16-12UNC / 38x14mm; 9/16-18UNF / 38x10mm; 5/8-11UNC / 45x18mm; 5/8-18UNF / 45x14mm; 3/4-10UNC / 45x18mm; 3/4-16UNF / 45x14mm; 7/8-9UNC / 55x22mm; 7/8-14UNF / 55x16mm; 1-8UNC / 55x22mm; 1-12UNF / 55x16mm; 1-14NS / 55x16mm; 1-1/8-7UNC / 65x25mm; 1-1/8-12UNF / 65x18mm; 1-1/4-7UNC / 65x25mm; 1-1/4-12UNF / 65x18mm; 1-3/8-6UNC / 65x25mm; 1-3/8-12UNF / 65x18mm; 1-1/2-6UNC / 75x30mm; 1-1/2-12UNF / 75x20mm; 1-3/4-5UNC / 90x36mm; 2-4-1/2UNC / 90x36mm
0307-911 | Cylindrical and tapered pipe-thread taps
Thread / overall L / thread Lc / shank d / square k — drawing dimensions to confirm: G1/8-28 / 59 / 8.5 / 8 / 6.2; G1/4-19 / 67 / 13 / 11 / 9; G3/8-19 / 75 / 13 / 14 / 12; G1/2-14 / 87 / 16 / 18 / 14.5; G3/4-14 / 96 / 16 / 22 / 18; G1-11 / 96 / 16 / 26 / 22; ZG1/8-28 / 96 / 16 / 8 / 6.2; ZG1/4-19 / 96 / 16 / 11 / 9; ZG3/8-19 / 96 / 16 / 14 / 12; ZG1/2-14 / 96 / 16 / 18 / 14.5; ZG3/4-14 / 96 / 16 / 22 / 18; ZG1-11 / 96 / 16 / 26 / 22
0307-912 | Thread-insert installation taps
Thread / overall L / thread Lc / shank d / square k — drawing dimensions to confirm: STI2×0.4 / 44.5 / 9.5 / 2.8 / 2.24; STI2.5×0.45 / 48 / 11 / 3.35 / 2.8; STI3×0.5 / 53 / 13 / 4 / 3.15; STI4×0.7 / 58 / 16 / 5 / 4.5; STI5×0.8 / 66 / 19 / 6.3 / 5; STI6×1 / 72 / 22 / 6.3 / 5; STI8×1.25 / 80 / 24 / 8 / 6.3; STI10×1.5 / 80 / 29 / 9 / 7.1; STI12×1.75 / 95 / 30 / 11.2 / 9
0307-913 | HSS combination drilling, tapping and deburring tools
Thread / overall L / drill d1 / pitch P — drawing dimensions to confirm: M3 / 65 / 2.5 / 0.5; M4 / 65 / 3.3 / 0.7; M5 / 69 / 4.2 / 0.8; M6 / 69 / 5 / 1; M8 / 72 / 6.8 / 1.25; M10 / 72 / 8.5 / 1.5; M12 / 80 / 10.3 / 1.75
0307-914 | Hexagonal dies for metric and inch threading
Thread directions: NPT, NPS, BSPT, BSPS and metric/unified inch forms — complete designation required; Pipe nominal size / metric nominal range / inch thread / across flats / thickness B — dimensions subject to approved drawing/units: NPT NPS / 6mm / 1/4-20NC 1/4-28NF / 19/32" / 1/4"; BSPT BSPS / 7~8mm / 5/16-18NC 5/16-24NF / 11/16" / 5/16"; 1/8" / 9~10mm / 3/8-16NC 3/8-24NF / 25/32" / 3/8"; not specified / 11mm / 7/16-14NC 7/16-20NF / 7/8" / 7/16"; 1/4" / 12~13mm / 1/2-13NC 1/2-20NF / 1-1/16" / 1/2"; not specified / 14mm / 9/16-12NC 9/16-18NF / 1-1/16" / 1/2"; 3/8" / 15~16mm / 5/8-11NC 5/8-18NF / 1-1/4" / 5/8"; 1/2" / 17~20mm / 3/4-10NC 3/4-16NF / 1-7/16" / 3/4"; not specified / 21~23mm / 7/8-9NC 7/8-14NF / 1-5/8" / 7/8"; 3/4" / 24~26mm / 1-8NC 1-12NF 1-14NS / 1-13/16" / 1"; not specified / 27~30mm / 1-1/8-7NC 1-1/8-12NF / 2" / 1"; 1"" / 31~33mm / 1-1/4-7NC 1-1/4-12NF / 2-3/16" / 1"; not specified / 34~35mm / 1-3/8-6NC 1-3/8-12NF / 2-3/8" / 1"; 1-1/4" / 36~40mm / 1-1/2-6NC 1-1/2-12NF / 2-9/16" / 1"; not specified / 41~42mm / NC&NF 1-5/8 / 3-1/8" / 1""; not specified / 43~45mm / 1-3/4 / 3-1/8" / 1""; 1-1/2" / 46~48mm / 1-7/8 / 3-1/8" / 1 1/4"; not specified / 50~52mm / 2 / 3-1/2" / 1 1/4"; 1-3/4" / 53~57mm / 2-1/4 / 3-1/2" / 1 1/4"; 2" / 58~60mm / 2-3/8 / 4-1/2" / 1 1/2"; 2" / 63~65mm / 2-1/2 / 4-1/2" / 1 1/2"; not specified / 65~68mm / 2-5/8 / 4-1/2" / 1 5/8"; not specified / 69~70mm / 2-3/4 / 4-1/2" / 1 5/8"; not specified / 70~72mm / 2-7/8 / 5" / 1 3/4"; 2-1/2" / 75~88mm / 3~3-1/2 / 5" / 2"; not specified / 100~112mm / 4~4-1/2 / 7" / 2 3/8"; not specified / 115~127mm / 4-5/8~5 / 7" / 2 1/2"
0307-915 | Carbide-tip masonry, tile and multi-material drills
Diameter / shank: 3–12 mm / hex; 3–25 mm / straight
0307-916 | Carbide hammer drills with slotted-drive shanks
Diameter / overall length / holder: 4–26 mm / 110,160,210,260,310,360,450,600,1000 mm / SDS-plus; 12–32 mm / 370,570,920,1320 mm / SDS-max
0307-917 | Shot-blasted steel chisels
Rod diameter / overall length / holder: 14–16 mm / 180,250,260 mm / SDS-plus; 18 mm / 240,280,300,360,400,460,500,600 mm / SDS-max; Machine mode: Rotation-stop chiselling
0307-918 | Ground-rod driver sockets
Opening / holder: 16 or20 mm / SDS-plus; 27 mm / SDS-max; 30 mm / hex; Other opening: 50 mm; exact hammer interface requires drawing
0307-919 | Floor and tile-removal chisels
Dimensions / interface: 14×185×75;14×250×40 mm / SDS-plus; 18×380×152 mm / SDS-max
0307-920 | Bolted floor-scraper chisels
Dimensions / interface: 14×275×125;14×275×100;18×300×100 mm / SDS-plus; 18×300×100;18×300×150 mm / SDS-max
0307-921 | Thin diamond cutting and grinding discs
Diameter / bore: 115/22;125/22;150/22;180/22;230/22 mm
0307-922 | Hot-pressed turbo-mesh diamond blades
Diameter / bore: 105/20;110/20;115/22;125/22;150/22;180/22;200/22;230/22;250/25.4;300/25.4;350/25.4 mm
0307-923 | Laser-welded construction diamond blades
Diameter / bore: 105/20;115/22;125/22;150/22;180/22;200/22;230/22;250/25.4;300/25.4;350/25.4;400/25.4;450/25.4;500/25.4;600/25.4 mm
0307-924 | Hot-pressed construction diamond blades
Diameter / bore: 105/20;110/20;115/22;125/22;150/22;180/22;200/22;230/22;250/25.4;300/25.4;350/25.4 mm
0307-925 | Brazed diamond multi-material blades
Diameter / bore: 100/16;105/22;115/22;125/22;180/22;230/22;300/25.4;350/25.4 mm
0307-926 | Brazed diamond blades for stone slabs
Diameter / bore: 100/20 or22;115/22;125/22 mm
0307-927 | Diamond cup grinding wheels
Diameter / bore: 100/16;115/22;125/22;180/22;230/22 mm
0307-928 | Vacuum-brazed cutting and grinding discs
Diameter / bore: 100/20 or22;115/22;125/22 mm
0307-929 | Carbide-toothed hollow core drills
Diameter / connection: 25–120 mm / M14;25–120 mm / SDS-plus
0307-930 | Electroplated diamond hole saws
Diameter / connection: 4–120 mm / M14, hex, 1-1/4 UNC or straight shank; thread detail requires approved drawing
0307-931 | Laser-welded diamond core drills
Diameter range: 25–450 mm; Connection: Approved drawing required
0307-932 | Brazed diamond hole saws
Diameter / connection: 5–150 mm / M14;5–16 mm / hex;20–200 mm / 1-1/4 UNC;5–16 or40–70 mm / straight shank
0307-933 | Brazed diamond drilling and milling heads
Diameter / connection: 4–35 mm / M14;7.2 mm / straight shank
0307-934 | Brazed diamond stone router profiles
Diameter / shank: 20/12.7;30/12.7;40/12.7 mm; Profile selection: Select the required edge profile from a drawing
0307-935 | Brazed diamond CNC engraving heads
Cutting diameter: 3–16 mm; Shank diameter: 6–16 mm
0307-936 | Brazed diamond hole chamfer heads
Diameter range / connection: 2–38 mm / M14;20–48 mm / M14
0307-937 | Brazed diamond grout-cleaning discs
Diameter / bore: 30/6;40/6;60/16;80/20;100/20 mm
0307-938 | Depressed brazed diamond grinding wheels
Diameter / bore: 100/16;115/22 mm
0307-939 | Threaded brazed diamond grinding discs
Diameter / connection: 115 mm / M14
0307-940 | Ventilated brazed diamond grinding wheels
Diameter / bore: 100/16;115/22;125/22;150/22;180/22 mm
0307-941 | Shaped brazed diamond profile wheels
Diameter × width / bore: 75×5;75×10;75×15;75×20;75×25;75×30;75×35;75×40 mm /20 mm
0307-942 | Brazed diamond mounted grinding heads
Shank diameter: 6 mm
0307-943 | Brazed diamond bullnose profile wheels
Diameter / connection: 65–100 mm / M14
0307-944 | Diamond-bead wire saws
Bead diameter: 6.3–11.5 mm; Beads per metre: 28–40
0307-945 | Left and right PCD laminate circular saw blades
Diameter / bore / teeth / direction: 300/30 mm /46 /left or right;300/80 mm /64 /left or right
0307-946 | PCD fibre-cement and board saw blades
Diameter / bore / teeth: 115/10 mm /4;165/16 mm /4;184/16 mm /4 or5;254/16 mm /6 or12;305/30 mm /96
0307-947 | Industrial carbide-tip wood crosscut blades
Diameter mm / tooth-count choices: 115/18,24,36;136/18,24,36;140/18,24,36;150/18,24,40;165/18,24,40;184/24,40,60;200/24,40,60;210/24,40,60;215/24,40,60;254/32,40,60,80;305/80,100,120;350/80,100,120
0307-948 | Carbide-tip panel saw blades
Diameter / bore / teeth: 300/30 mm /96; Panel reference: Below35 mm in the selected application; verify actual panel and machine
0307-949 | Single and split scoring blades
Diameter / bore / teeth: 120/20 mm /24 single;120/20 mm /12+12 double
0307-950 | Large carbide-tip circular panel blades
Diameter / bore / teeth: 350/30 mm /72 or84
0307-951 | Coated carbide-tip wood saw blades
Diameter mm / tooth-count choices: 115/18,24,36;136/18,24,36;140/18,24,36;150/18,24,40;160/18,24,40;165/24,40,48,60;184/24,40,60;200/24,40,60;210/24,40,60;215/24,40,48,60;254/32,40,60,80;305/80,100,120;350/80,100,120
0307-952 | Metric carbide-tip crosscut blade combinations
Diameter / bore / teeth: 165/16 mm /24;184/20 mm /24;254/16 mm /40;305/25.4 mm /80
0307-953 | Multi-material carbide-tip circular blades
Diameter / bore / teeth: 190/30 mm /38; Sheet reference: 1–2 mm iron/aluminium application; operating conditions require approval
0307-954 | Aluminium-profile carbide-tip saw blades
Diameter / bore / teeth: 254/16 mm /100
0307-955 | Fine-tooth circular blades for soft materials
Diameter / bore / teeth: 184/16 mm /140;254/16 mm /180
0307-956 | Lightweight coated blades for cordless wood saws
Diameter / bore / teeth: 125/22.2 mm /24;140/22.2 mm /24;150/22.2 mm /24;165/22.2 mm /24;184/22.2 mm /24
0307-957 | Cordless wood blades with multiple tooth schedules
Diameter / bore mm / tooth-count options: 115/20/25,40;165/16/25,40,50;184/16/25,40,45,50,60;254/16/40,50,60,80;305/16/60,80,100; Surface directions: Coated and uncoated configurations; chemical specification to approve
0307-958 | Thirty-degree-tooth coated saw blades
Diameter / bore / teeth: 125/20 mm /45;125/22.2 mm /45; Tooth angle: 30°
0307-959 | Stacked dado blade and chipper sets
Outside blades: 8-inch /24 teeth;2 outside blades; Arbor reference: 5/8 inch; Groove reference: 1/4–7/8 inch; final stack and machine approval required; Components: Two outside blades,1/8-inch2-tooth and1/16-inch2-tooth chippers, stainless-steel shims; chipper count to confirm
0307-960 | Vacuum-brazed diamond multi-material discs
Diameter / bore: 100/22.23;115/22.23;125/22.23;180/22.23;230/22.23 mm
0307-961 | Tungsten-carbide grit multi-material discs
Diameter / bore: 100/22.23;115/22.23;125/22.23 mm
0307-962 | Left/right CNC dowel drills
Cutting diameter: 3–15 mm; Shank diameter: 10 mm
0307-963 | Left/right brad-point boring drills
Cutting diameter: 5–15 mm; Shank diameter: 10 mm
0307-964 | Carbide-tip hinge boring drills
Cutting diameter: 15–60 mm; Shank diameter: 10 mm
0307-965 | Spiral-flute carbide hinge boring drills
Cutting diameter: 35 mm; Shank diameter: 10 mm
0307-966 | Carbide-tip through-hole boring drills
Cutting diameter: 6–12 mm; Shank diameter: 10 mm
0307-967 | Dowel drills with carbide countersink
Cutting diameter: 3–12 mm; Shank diameter: 12.7 mm
0307-968 | Solid-carbide V-point through-hole drills
Cutting diameter: 3–8 mm; Shank diameter: 10 mm
0307-969 | Solid-carbide brad-point dowel drills
Cutting diameter: 2–8 mm; Shank diameter: 10 mm
0307-970 | Carbide rough-cut spiral mills for panels
Cutting diameter: 3–12 mm; Shank diameter: 12.7 mm
0307-971 | Carbide-tip straight router cutters
Cutting diameter: 3–12 mm; Shank diameter: 12.7 mm
0307-972 | Solid-carbide upcut spiral router bits
Cutting diameter: 6–12 mm; Shank diameter: 6–12 mm
0307-973 | Solid-carbide downcut spiral router bits
Cutting diameter: 6–12 mm; Shank diameter: 6–12 mm
0307-974 | Carbide compression spiral bits with chipbreakers
Cutting diameter: 4–12 mm; Shank diameter: 4–12 mm
0307-975 | Solid-carbide ball-nose wood router bits
Cutting diameter: 3–16 mm; Shank diameter: 3–16 mm
0307-976 | Three-spiral lock-mortise cutters
Cutting diameter: 16–22 mm; Shank diameter: 16 mm; Stated extended geometry: 16×55/105×D16×165 mm; exact dimension labels to approved drawing
0307-977 | Carbide-tip profile router bits
Cutting diameter: 21.8–88.9 mm; Shank diameter: 12.7 mm
0307-978 | Tapered ball-nose carving bits
Tip radius / stated length / taper: 1/64 inch /1-1/2 inch×3L /4.2°;1/16 inch /1-1/2 inch×3L /2.4°;1/32 inch /1-1/2 inch×3L /3.6°; Shank: Select6 mm or1/4-inch drawing; these interfaces are not interchangeable
0307-979 | Single-flute carbide engraving tools
Angle choices: 15°,30°,45°; Length / shank: 2-1/2 inch /6.35 mm; Tip: Approve actual tip width and units on drawing
0307-980 | Three-flute carbide V-groove cutters
Diameter / length / angle / shank: 7/8 inch /2-1/2 inch /30°,60°or90° /6.35 mm
0307-981 | Coated HSS end-mill and drilling cutters
Stated dimensions / shank: 6×16×100 /8;8×30×100 /8;4.5×5×80 /8 mm; approve dimension order on drawing
0307-982 | Aluminium honeycomb panel milling cutters
Stated cutting dimensions / shank: 6×22 /13;8×22 /13;8×40 /10 mm; interface to approved drawing
0307-983 | Carbide-tip hinge/lock-slot cutters
Stated dimensions / shank: 13×35×150 /16;13×35×150 /18 mm; confirm dimension order
0307-984 | Three-flute TiN HSS tapered cutters
Diameter directions / shank: 2–12;3–12;4–12 mm /12 mm
0307-985 | Bearing-guided trimming cutters
Stated dimensions / shank: 6×28.58×75 /6;6.35×28.58×76.2 /6.35;8×32×80 /8;8×45×100 /8;12.7×38×101.6 /13 mm; final drawing governs
0307-986 | Double-ended helical flush-trim cutters
Stated dimensions / shank: 4×60×120 /4;5×80×150 /5;6×80×150 /6;6×100×165 /6;6×125×180 /6;8×80×150 /8;8×100×165 /8;8×130×200 /8 mm
0307-987 | Aluminium-body pre-milling cutterheads
Diameter / bore / height / teeth: 125/30/65 mm /18;100/30/51 mm /4; Direction: Left/right orientation to approved drawing
0307-988 | Vertical spiral cutterheads
Dimensions / insert-cut reference / body configuration: 90x35xH60x6T 15/30 Light-Cutting steel body 90x35xH100x6T 15/37 Heavy-Cutting steel body ; 90x35xH80x6T 15/30 Light-Cutting steel body 90x35xH100x6T 14/30 Heavy-Cutting steel body ; 90x35xH100x6T 15/30 Light-Cutting steel body 90x35xH120x6T 15/37 Heavy-Cutting steel body ; 90x35xH120x6T 15/30 Light-Cutting steel body 90x35xH120x6T 14/30 Heavy-Cutting steel body ; 100x35xH60x6T 15/30 Light-Cutting steel body 90x35xH130x6T 15/37 Heavy-Cutting steel body ; 100x35xH80x6T 15/30 Light-Cutting steel body 90x35xH160x6T 15/37 Heavy-Cutting steel body ; 100x35xH100x6T 15/30 Light-Cutting steel body 100x35xH40x6T 15/37 Heavy-Cutting steel body ; 100x35xH120x6T 15/30 Light-Cutting steel body 100x35xH60x6T 15/37 Heavy-Cutting steel body ; 125x40xH60x6T 15/30 Light-Cutting steel body 100x35xH80x6T 15/37 Heavy-Cutting steel body ; 125x40xH80x6T 15/30 Light-Cutting steel body 100x35xH100x6T 15/37 Heavy-Cutting steel body ; 125x40xH100x6T 15/30 Light-Cutting steel body 100x35xH120x6T 15/37 Heavy-Cutting steel body ; 125x40xH120x6T 15/30 Light-Cutting steel body 100x35xH150x6T 15/37 Heavy-Cutting steel body ; 90x35xH40x6T 15/37 Heavy-Cutting steel body 100x40xH60x6T 15/37 Heavy-Cutting steel body ; 90x35xH60x6T 15/37 Heavy-Cutting steel body 100x40xH80x6T 15/37 Heavy-Cutting steel body ; 90x35xH60x6T 14/30 Heavy-Cutting steel body 100x40xH100x6T 15/37 Heavy-Cutting steel body ; 90x35xH80x6T 15/37 Heavy-Cutting steel body 100x40xH120x6T 15/37 Heavy-Cutting steel body ; 90x35xH80x6T 14/30 Heavy-Cutting steel body 100x40xH130x6T 15/37 Heavy-Cutting steel body; Drawing units: Confirm all dimensional symbols and cutter-body selection before order
0307-989 | Long spiral planer cutterheads
Head diameter / length / groove count / insert: 80–200 mm /150–1600 mm /4T–12T /14×14×2 mm;80–200 mm /150–1600 mm /4T–12T /15×15×2.5 mm R150;50–100 mm /150–600 mm /3T–6T /15×15×2.5 mm R150
0307-990 | Reversible carbide woodworking knives and blanks
Square dimensions: 10×10×1.5;11×11×1.5;12×12×1.5;13.8×13.8×2.5;14×14×2;14.3×14.3×2.5;14.6×14.6×2.5;15×15×2.5;16×16×2;16.5×16.5×2.8;18×18×2.45 mm; Rectangle dimensions: 20×12×1.5;30×12×1.5;40×12×1.5;49.5×12×1.5;50×11×1.5;60×12×1.5 mm
0307-991 | Indexable profile router cutters
Stated dimensions / shank: 38.1×27×19×76.2 mm /12 mm;19×30×90 mm /8 mm; drawing governs all symbols; First configuration angle: 91°
0307-992 | PCD raised-panel cutters
Diameter range: 31.8–47 mm; Stated height direction: 9.3–14.7 mm; exact symbol and shank require drawing
0307-993 | Curved bi-metal reciprocating blades
Overall length / TPI: 200 mm /10–14;250 mm /10–14; Holder: Confirm the actual reciprocating-saw connection
0307-994 | Half-inch-shank reciprocating wood blades
Overall length: 152–300 mm; TPI directions: 3,5,6,10,12; Shank: 1/2 inch; actual connection drawing required
0307-995 | Carbide-tooth reciprocating blades for wood
Overall length / TPI: 152 mm /3,6,8;228 mm /3,6,8
0307-996 | Carbide-tooth reciprocating blades for metal
Overall length / TPI: 150 mm /8,10;225 mm /8,10;300 mm /8,10
0307-997 | Fully ground HSS brad-point wood drills
Diameter / overall-length ranges: 3–13 mm /90–160 mm
0307-998 | Carbon-steel brad-point wood drills
Diameter / overall-length ranges: 3–31 mm /60–250 mm
0307-999 | Two-guide-channel wood drills
Diameter range: 3–20 mm; Overall length: Approve drawing; source length string is ambiguous
0307-1000 | Stubby hex-shank brad-point drills
Diameter / overall length: 2.38/60;3.17/60;4.76/60;6.35/60;7.94/60;9.53/60 mm
0307-1001 | Three-flute ground HSS wood drills
Diameter / overall-length ranges: 3–13 mm /90–160 mm
0307-1002 | Single-spiral beam auger drills
Diameter / overall-length ranges: 6–30 mm /90–450 mm; Shank directions: Hex and SDS-plus
0307-1003 | Four-flute wood drills
Diameter range / overall length: 12–40 mm /165 mm
0307-1004 | Hand-powered eye auger drills
Diameter / overall length: 25 mm /152–300 mm
0307-1005 | Extra-long formwork drill bits
Diameter / overall-length ranges: 6–30 mm /400–1000 mm; Shank directions: Straight and SDS-plus
0307-1006 | Three-flute carbon-steel wood augers
Diameter / overall-length ranges: 6–35 mm /152–600 mm; Shank: 1/4-inch hex
0307-1007 | Three-flute spade wood drills
Diameter range / overall length: 10–35 mm /165 mm; Shank: 1/4-inch hex
0307-1008 | Self-feeding three-flute spade drills
Diameter range / overall length: 10–35 mm /165 mm; Shank: 1/4-inch hex
0307-1009 | Flat spade wood drills
Diameter range / overall length: 6–40 mm /152 mm
0307-1010 | Three-flute carbide-tip Forstner bits
Diameter range: 25–100 mm; Shank: Hex; actual dimensions on approved drawing
0307-1011 | Carbide-tip cylinder boring bits
Diameter / overall-length ranges: 3–30 mm /90–450 mm; exact pair to drawing
0307-1012 | Deep plug and tenon cutters
Diameter / overall-length ranges: 9.5–60 mm /140–160 mm
0307-1013 | Ground carbon-steel Forstner bits
Diameter / overall-length ranges: 6–115 mm /60–160 mm
0307-1014 | Toothed-rim Forstner wood bits
Diameter / overall-length ranges: 6–115 mm /60–160 mm
0307-1015 | Rotary wood-carving and boring heads
Head diameter: 0.8,1,1.2 inch; Thread direction: 5/8–11; exact interface drawing required
0307-1016 | Flat, tapered and bevelled wood-shaping wheels
Diameter / profiles: 115 or125 mm /flat,tapered,bevelled
0307-1017 | Wood-handled turning and carving tools
Cutting-width / overall-length ranges: 4.7–25.4 mm /160–255 mm
0307-1018 | Bi-metal hole saws with separate pilot arbors
Diameter range: 22–200 mm; Holder: Tri-shank; approved arbor drawing required
0307-1019 | Carbide-tip multi-material hole saws
Diameter directions / connection: 22–150 mm /1/2–20 UNF or5/8–18 UNF;22–200 mm /1/2–20 UNF or5/8–18 UNF
0307-1020 | Thin bi-metal hex-drive hole saws
Diameter / shank: 18–44 mm /6.35 mm
0307-1021 | Single- and double-edge pull saws
Length options / TPI: 150,180,240 mm /17;150,225,300 mm /10,12,18; final pairing to selected blade
0307-1022 | Depth-stop countersink and pilot-drill combinations
Stated cutting size / shank: 3.2×4.8 mm /6.35 mm hex; confirm pilot/countersink symbols; Stop directions: Plain low-friction collar; bearing-equipped collar
0307-1023 | Push-lock quick-change hole-saw arbors
Hole-saw diameter range / shank: 32–165 mm /11 mm; approved connection drawing required
0307-1024 | Adjustable countersink drill assortments
Pilot reference: 3.2×4.8 mm; dimension meaning to approved drawing; Countersink range: 9.5–12.7 mm; final size pairing to selected set
0307-1025 | Ceramic and alumina automotive sanding discs
Diameter: 100,115,125,150 mm; Grit: P40–P2500
0307-1026 | White alumina sanding discs
Diameter: 100,115,125,150 mm; Grit: P60–P1200
0307-1027 | Green-film ceramic/alumina sanding discs
Diameter: 100,115,125,150,180 mm; Grit: P40–P2000
0307-1028 | Soft TPU and sponge-backed sanding discs
Diameter: 100,115,125,150 mm; Grit: P180–P3000
0307-1029 | Alumina film sanding discs
Diameter: 125,150 mm; Grit: P40–P2000
0307-1030 | Ceramic/alumina sanding mesh
Diameter: 125,150 mm; Grit: P40–P3000; Abrasive: Aluminium oxide with mixed ceramic direction
0307-1031 | Three-dimensional pyramid-structured sanding discs
Diameter: 125,150 mm; Grit: P40–P2000
0307-1032 | Flexible sponge-backed sanding rolls
Grit: P80–P800; Use direction: Wet/dry hand sanding, subject to selected construction
0307-1033 | Perforated sponge sanding rolls and tear-off pads
Roll: 115 mm×25 m; Pad: 115×125 mm; Pack reference: 200 pads per roll; Grit: P80–P2000
0307-1034 | Fine-repair dot sanding abrasives
Abrasive: Silicon carbide and aluminium oxide; Grade directions: A3,A5,A7,A9; agree actual grade system
0307-1035 | Diamond flap discs
Diameter: 115,125 mm; Grit: P80,P100,P120,P200,P400; Material direction: Titanium alloy, carbide, stainless, stone, ceramics or glass; validate actual disc selection
0307-1036 | Ceramic and zirconia-mixed flap discs
Diameter: 100,115,125,150,180 mm; Grit: P40,P60,P80,P120; Wheel forms: Type27 and Type29 configurations
0307-1037 | Aluminium-oxide flap discs
Diameter: 100,115,125,150,180 mm; Grit: P40–P320; Wheel forms: Type27 and Type29
0307-1038 | Zirconia flap discs
Diameter: 100,115,125,150,180 mm; Grit: P40–P120; Wheel forms: Type27 and Type29
0307-1039 | Nylon quick-change conditioning discs
Diameter: 50,75 mm; Attachment: Quick-change disc; approve exact locking interface
0307-1040 | Zirconia quick-change abrasive discs
Diameter: 50,75 mm; Grit: P40,P60,P80,P120; Attachment: Quick-change locking type to approved holder
0307-1041 | Nylon industrial scouring pads
Diameter directions: 50,75,100,115,125,150 mm; Grit: P180–P3000; Colours: Red,green,grey,brown; colour-to-grade pairing requires approval
0307-1042 | Bell-shaped non-woven bevel wheels
Selected connection: 90 mm diameter /M10×1.5; Other diameter: 100 mm; actual connection to drawing; Grade directions: #46,coarse,medium,fine,extra fine
0307-1043 | Alumina fibre-backed sanding discs
Diameter: 100,115,125,178 mm; Abrasive: Aluminium oxide
0307-1044 | Flat surface-conditioning wheels
Diameter: 50,75,100,115,125 mm; Selected grain specification: Requires sample/drawing confirmation
0307-1045 | Soft foam interface cushions
Diameter: 25,50,75,100,115,125,150 mm; Material direction: Sponge/foam; exact density and attachment to approve
0307-1046 | Rubber hook-and-loop backing pads
Diameter: 50,75,100,115,125,150 mm; Attachment: Hook-and-loop face; tool-side interface to drawing
0307-1047 | Orbital-sander backing pads
Diameter: 150 mm; Face attachment: Hook-and-loop or adhesive direction; exact adhesive specification to confirm; Hole layouts: Multi-hole,normal holes,no holes
0307-1048 | Thin rubber-and-metal abrasive backers
Diameter: 100,115,125,150,180 mm
0307-1049 | Foam pads with threaded backing plates
Diameter / connection: 150 mm /M14; alternate tool interface requires confirmation
0307-1050 | Open-cell hook-and-loop interface pads
Diameter / thickness: 25/13;50/13;75/13;100/13;115/13;125/13;150/13 or20 mm
0307-1051 | Textured hook-and-loop foam polishing pads
Diameter: 75,100,125,150,180,200 mm; Hole layouts: Multi-hole,normal-hole,no-hole; Attachment: Hook-and-loop or adhesive direction; exact face to approve
0307-1052 | Shank-mounted miniature flap wheels
Head diameter: 10,15,20,25,30,40 mm; Grit: P40–P400; Shank: Approve diameter, length and marked speed
0307-1053 | Hook-and-loop wool polishing wheels
Diameter: 125,150,180 mm; Material: Wool
0307-1054 | Dense wool polishing pads
Diameter: 25,50,75,100,125,150,180 mm; Material direction: Pure wool; composition verification with ordered sample
0307-1055 | Folded cloth polishing buffs
Diameter: 150,180,200 mm; Grade reference: P80–P600; exact cloth/abrasive construction to approve
0307-1056 | Cloth waxing and final-finishing buffs
Diameter: 75,100,125,150,200 mm; Grade directions: Finish,super finish
0307-1057 | Double- and four-sided hand sanding blocks
Block dimensions: 100×70×25;125×75×25;120×100×12;140×115×5 mm; Grit: P36–P2500
0307-1058 | Alumina sanding belts
Width: 13,40,50,60,65,75,100,105,150 mm; Overall-length range: 457–1220 mm; exact width/length pairing to selected belt; Grit: P40–P400
0307-1059 | Solid oil-based metal-polishing compounds
Grade directions: A3,A5,A7,A9; approve abrasive grade and substrate pairing; Block dimensions: 75 × 25 × 25; 189 × 54 × 50; 115 × 33 × 32 mm
0307-1060 | Liquid and paste paint-polishing compounds
Pack mass: 500 g,1000 g; Grade references: P1000,P1200,P1500,P2000,P2500; approve selected formulation
0307-1061 | Flexible abrasive end brushes
Design brief: Head and shank dimensions,filament material,abrasive grade,workpiece,holder and permitted speed
0307-1062 | Radial ceramic bristle discs
Diameter directions: 15 mm,20 mm,33 mm;1,1.5,2,3,4,6,8 inch; Straight-filament directions: 3,4,6,8 inch; Selected grit directions: P50,P80,P220,P320,P400,P600,P1000,P5000; remaining ambiguous grades to confirm
0307-1063 | Rubber and abrasive bristle discs
Diameter: 25,50,76,115 mm
0307-1064 | Custom abrasive disc brushes
Diameter: 35,45,55,60,80,100,120,145 mm; Customization brief: Filament,abrasive,trim length,fixing pattern,workpiece and machine interface
0307-1065 | Retail abrasive assortments
Set directions: 5,8,10,20,50 pieces; Packaging direction: Moulded-pulp and other shown pack layouts; actual pack to approve
0307-1066 | Oscillating-tool attachment and surface directions
Attachment: Closed and open fixing patterns; exact tooth/slot geometry to drawing; Surface choices: Black paint,black coating,blued surface,gold paint,natural scraper finish,electrochemically polished stainless,electroplated diamond direction; Tooth directions: Side-set standard,three-side-ground precision,wave-set tooth forms
0307-1067 | Milled and ground carbon-steel oscillating plunge blades
Milled tooth widths: 10,20,32,34,45,65,68 mm; Three-side-ground tooth widths: 32,34,45,65,68 mm; Stainless-shank combinations: 42 or34 mm milled;34 or68 mm three-side-ground; Round/segment direction: 87 mm HCS
0307-1068 | Carbon-steel oscillating blades with paired cutting depths
Width / cutting depth: 47/40;22.5/52.5;22.5/36.5;28/48;22/50.5;10/34 mm; Serrated soft-material direction: 68 mm width for carton,polystyrene,carpet,leather and rubber
0307-1069 | Carbon-steel oscillating scrapers and segment cutters
Scraper dimensions: 28 mm /50 mm cutting depth;50 mm;52×26;52×45;28×50 mm; special curved shapes to drawing; Square-opening blade: 75×75 mm /35 mm cutting depth; Carbon-steel segment diameters: 87,87.8,91.3 mm; HCS/HSS combination segment forms: 65,87,100,103 mm diameter;103×80 mm relief form; HCS/carbide direction: 74 mm nominal size /8 mm cutting depth; exact shape drawing required
0307-1070 | High-speed-steel oscillating round cutters
HSS diameters: 64,80,80.5,100 mm; M2 HSS diameters: 80,87 mm; Insulation round direction: 100 mm; selected edge profile for soft materials
0307-1071 | Bi-metal oscillating blades with milled and ground teeth
M2 bi-metal: 32 or45 mm three-side-ground;34 or68 mm milled; Milled bi-metal widths: 10,20,32,34,44,45,65,68 mm; Extended milled widths: 32,45 mm; M42 segment diameter: 87 mm; M42 width / cutting depth: 22.5/52.5;10/35;35/43;28/48;20/36.5;10/34;28/50;40.3/68 mm; Other bi-metal width / cutting depth: 28/48 mm
0307-1072 | Titanium-treated bi-metal oscillating blades
Width / cutting depth: 34/40;20/40;41/41;44/51;44.6/40;28/51 mm
0307-1073 | Stainless oscillating window and adhesive scrapers
Flat width: 52 mm; Width / cutting depth: 35/52;31/77 mm; Other directions: Bent,pointed,serrated and long-window profiles; dimensions to approved drawing
0307-1074 | Carbide-grit oscillating cutters and rasps
Round/segment nominal diameters: 63,65,80,86 mm; Delta nominal size: 78 mm; Finger nominal size: 33 mm; Oval nominal size: 98 mm; Double-ended nominal size: 86 mm; flat and offset forms
0307-1075 | Diamond-grit oscillating cutting discs
Diameter directions: 63,65,80 mm; Shape options: Flat and offset attachment forms; actual holder drawing required; Other triangular hard-abrasive form: 78 mm HCS/carbide; composition remains distinct from diamond discs
0307-1076 | Hook-and-loop oscillating sanding supports
Aluminium-alloy/rubber delta sizes: 78,90 mm; Other direction: Pointed HCS/rubber backer; dimensions to drawing; Face: Hook-and-loop
0307-1077 | Multi-step chip-control cobalt-HSS drills
Legacy diameter direction: 3–25 mm metric;1/8–1 inch imperial; current availability and exact geometry to confirm; Layout references: DIN338 metric and ANSI B94.11M; DIN340/DIN1897 directions require confirmation; Construction: Cobalt-bearing HSS,chip-control point,three-flat shank
0307-1078 | Single-process ground cobalt-HSS twist drills
Legacy diameter direction: 3–20 mm metric;1/8–3/4 inch imperial; current configuration to confirm; Point direction: 130° split-point icon; Construction: Cobalt-bearing HSS; fully ground,blank or semi-finished direction
0307-1079 | Mixed-size drill sets with rigid multi-material cases
Metric packs: 25 pieces:1–13 mm in0.5 mm steps;19 pieces:1–10 mm in0.5 mm steps;13 pieces:1.5–6.5 mm,exact quantity pairing to confirm;5 pieces:3,4,5,6,8 mm; Imperial packs: 29 pieces:1/16–1/2 inch in1/64 steps;21 pieces:1/16–3/8 inch in1/64 steps;14 pieces:1/16–1/2 inch,exact assortment to approve; Case materials: ABS + PC + TPR directions

This is a sourcing brief, not a quotation, certification, stock confirmation or guaranteed delivery schedule. Confirm the model-specific specification, minimums, sample approval, costs, lead time and contract terms before ordering.