FACTORY SOURCING HUB — AUTOMOTIVE REPAIR, WORKSHOP STORAGE, POWER & HAND TOOL SOURCING
Page reference: 0370
Send to: kunhuow@gmail.com

Reply email:
Product / reference:
Quantity per model and variation:
Sales market / intended user:
Material / size / performance:
Logo / artwork:
Packaging / labels / carton requirements:
Samples / testing / documents:
Target budget / timing / shipping basis:
Additional requirements:

REFERENCE OPTIONS
0370-01 | Petrol and diesel compression-testing reference
Maximum test-pressure reference: 50bar; published 725psi equivalent; Couplings: Straight and angled quick-coupling directions; Injector adapter threads: M20, M22 and M24; application-specific injector option to confirm; Spark-plug adapter sizes: M10, M12, M14 and M18; Other adapters: Glow-plug adapter programme; exact engine fitment to confirm
0370-02 | Cylinder pressure-loss testing kit
Adapter threads: M10 × 1.00; M12 × 1.25; M14 × 1.25; M18 × 1.5; M24 × 2mm; Additional adapter direction: M12 × 1.25mm with 7mm hole; engine fitment to confirm; Maximum-pressure reference: 6.8bar; current operating instructions required
0370-03 | Common-rail injector return-pressure diagnosis
Gauge ranges; separate selections: 1–3bar and 1–15bar; Accessory directions: Hoses, return-flow/injector adapters, transparent housing, drain valve, oil tube and quick couplings; Application brief: Piezo common-rail injector return line; exact system to confirm
0370-04 | Parking-sensor bumper hole-cutting kit
Published cutter diameters: 17, 18, 18.2, 19, 20, 22.5, 24, 26, 26.7, 27, 28.1, 29.3, 32, 34, 38 and 38.9mm; Material/thickness reference: Plastic up to 5mm; actual material trial to approve; Supporting components: Die; 8mm HSS drill; spindle with nut; 13mm six-point nut-driver bit with 1/4in hex shank; Kit arrangement: 16 cutters plus four supporting components
0370-05 | Wiper-arm puller configuration
Component direction: Universal puller, slide hammer, pressure spindle, extension and attachment; Gripper selection: Eight grippers listed; exact bill of contents to approve; Other component: Hex L-key direction; kit counting basis to confirm
0370-06 | Hydraulic vehicle-battery lift-table reference
Published capacity: 1000kg; exact load conditions and file to approve; Lift-height range: 550–1750mm; Table size: 1500 × 800mm; Additional table-height adjustment: 160–210mm; mechanism/role to confirm on drawing; Table movement: ±50mm in four directions as stated; Net mass / mobility: 270kg; PU caster direction
0370-07 | 20V brushless riveter reference
Listed platform voltage: 20V; actual battery/interface to approve; Traction-force reference: 20,000N; Rivet-diameter range: 2.4–4.8mm; Stroke: 25mm; Control direction: Hall-sensor return; overload protection; stem collector
0370-08 | 20V brushless mini circular-saw reference
Listed platform / motor: 20V; brushless; No-load speed: 6900rpm; Maximum cut-depth references: 40mm at 90°; 29mm at 45°; Base-angle adjustment: 0–45°; Blade direction: 24-tooth TCT blade; diameter/bore and unit to confirm; Accessory direction: Hex key and parallel guide; plastic guard/shield arrangement
0370-09 | 82mm cordless brushless planer reference
Listed platform voltage: 20V; No-load-speed reference: 12,000min⁻¹; Planing width: 82mm; Planing depth: 0–3mm; Rebating depth: 0–15mm; Guide direction: Parallel guide and depth guide
0370-10 | Variable-speed brushless angle-grinder reference
Listed platform voltage: 20V; No-load-speed adjustment: 5000–9000rpm in 100rpm steps; Maximum wheel geometry: 125mm diameter; 6mm thickness; Control: Digital speed display; Accessory direction: Side handle, spanner and guard
0370-11 | Rotary/orbital mini polisher and sander reference
Listed platform voltage: 20V; No-load-speed selections: 2000 / 3000 / 4000 / 5800rpm; Published stroke selections: 0 / 3 / 12mm; mode arrangement to approve; Maximum backing-pad size: 75mm; Maximum foam-pad / sanding-paper size: 80mm; Control direction: Constant-speed control
0370-12 | Cordless garden-sprayer reference
Listed platform voltage: 20V; Container capacity: 4L; Water-flow reference: 500ml/min; Published working pressure: 6bar; confirm operating setup; Nozzle diameter: 1.5mm; Hose / lance lengths: 1.2m / 0.5m
0370-13 | Mixed screw, bolt and nut-extractor kit
Kit count reference: 49 pieces; exact contents to approve; Nut-extractor direction: 13 metric/inch selections; actual drive to confirm; Drill-size range: 16 listed sizes from 5/64in to 1/2in; Screw-extractor selections: Numbers 1–6; Other groups: Separate 13-size group and 3/8in extension; item roles to approve
0370-14 | Separable wheeled toolbox and drawer modules
Materials: PP + steel; top aluminium-handle direction; Overall size; including casters: 49 × 22.5 × 80cm; Top toolbox size: 43.5 × 22.5 × 15cm; Shallow-drawer dimensions: 38.5 × 22 × 6cm; Bottom-drawer dimensions: 38.5 × 22 × 12.5cm; Handle lengths; excluding casters: 47cm retracted; 91cm extended; Drawer arrangement: Ball-bearing slide direction; separable/combined modules
0370-15 | Insulated-tool assortment reference
Case reference: ABS; 425 × 300 × 115mm; Assortment reference: 65 pieces; current bill to approve; Drive groups: 1/4in and 3/8in socket, ratchet, bit-socket and extension selections; Listed material directions: 50BV30 for stated socket/bit/extension groups; Cr-Mo ratchets; Other tools: Metric ring spanners, screwdrivers, pliers, adjustable wrench, cable shears, scissors and tape; Construction direction: Single/double-colour injection-moulded insulation by component
0370-16 | V-opening crowfoot-style wrench assortment
Material: Cr-Mo; Metric opening sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22 and 24mm; Extensions: 3/8in drive; 75mm and 125mm; Set reference: 12 wrench sizes plus two extensions; Construction direction: V-shaped opening; retention/locking-hole design
0370-17 | Low-voltage vehicle circuit-tester reference
Stated DC range: 6–24V DC; Function directions: Continuity, polarity, lamp/motor checks, selectable power supply, short-circuit tracing and ground-contact checks; Quotation inputs: Circuit, operating method, leads and relevant item file
0370-18 | Manual and pneumatic fluid-extractor reference
Capacity reference: 9L as titled; current container file to approve; Operation: Manual or compressor-assisted; Suction probes: 6mm and 10mm diameter; brake-bleeding hose direction; Air inlet: 1/4in; thread standard to confirm; Air-consumption field: 5cfm; test/pressure conditions to confirm
0370-19 | Adjustable conical flaring-tool reference
Metric size range: 5–16mm; Materials stated: Brass and aluminium pipes; Function: Adjustable conical/tapered flares
0370-20 | Metric tap-and-die assortment reference
Kit count reference: 32 pieces; Tap / die groups: 21 taps and seven dies; stated metric sizes M3, M4, M5, M6, M8, M10, M12; Tap-wrench range: M1–M12 as published; Die-wrench geometry: 25mm outside-diameter direction; Supporting components: Screwdriver and thread-pitch gauge
0370-21 | Petrol-engine camshaft and crankshaft timing direction
Published displacement references: 1.0L, 1.2L, 1.4L and 1.5L petrol; exact variants to confirm; Tool groups: Camshaft-housing plate, spacers/adapters and fixings; inclinometer/reference bar; Locating / adjustment groups: Camshaft/crankshaft timing pins, lever stops and tensioner-pulley adjuster; Procedure direction: Listed mechanical operation without vehicle-OBD interaction
0370-22 | Fuel, cooling, lubrication and ignition service programmes
Fuel direction: Injector/nozzle tools, feed-pipe pliers, seat cutters and fluid pumps; Cooling / oil direction: Hose-clamp tools, funnels/antifreeze testing, filter wrenches and fluid extraction; Ignition direction: Spark/glow-plug sockets, thread repair and plug-wire tools
0370-23 | Clutch, transmission, suspension and steering programmes
Driveline direction: Clutch alignment/assembly tools, CV-boot clamp tools and transmission-fluid service; Suspension / wheel direction: Strut and coil-spring tools, wheel/hub and tyre-service directions; Steering / pulling direction: Steering-wheel, pulley, harmonic-balancer and ball-joint tools
0370-24 | Brake, body and air-conditioning tools
Brake direction: Caliper sockets and rewind tools, pipe bending/flaring and pedal-adjustment tools; Body direction: Trim/removal tools, scrapers, pry/wedge tools, dent pullers and flanging/punch tools; Air-conditioning direction: Leak-detection, couplers, flaring and compressor-clutch tools
0370-25 | Automotive electrical and general service tools
Electrical direction: Battery/circuit testers, multimeter and crimping-tool enquiries; General service direction: Bearing/gear pullers, hook/slogging wrenches, thread repair and tyre-bead tools
0370-26 | Woodworking, fastening and powered cutting programmes
Woodworking directions: Mitre/circular/jig/reciprocating/plunge saws, planers, routers, biscuit jointers and nail/staple tools; Fastening / drilling directions: Drills, screwdrivers, impact/ratchet wrenches and rotary-hammer enquiries; Cutting / grinding directions: Angle grinders, threaded-rod cutters and multifunction-tool directions
0370-27 | Garden, cleaning and portable utility tools
Garden directions: Grass/hedge trimmers, saws/pole saws, pruning, blowers, mowers, sprayers and chain sharpening; Cleaning / utility directions: Vacuums, scrubbers, washers, pumps, inflators/compressors, fans and lights; Other portable directions: Radio and cordless coffee-machine or mixer enquiries
0370-28 | Construction, installation and surface-finishing tools
Installation directions: Press/expander tools, tile cutters/vibrators, augers, drain cleaners, wire pullers and band/concrete saws; Finishing directions: Sanders/polishers, drywall sanding, mixing, heat/PVC-welding, caulking, grease and paint-spray tools; Corded programme: Drill/hammer and related mains-powered tool enquiries
0370-29 | Welding, plasma and battery-support programmes
Process directions: MMA, MIG/MAG, TIG and plasma-cutting equipment enquiries; Battery support: Battery packs, single and multiple charging directions; Quotation inputs: Supply/platform, duty/test conditions, accessories, battery interface and plug/destination
0370-30 | Workshop storage, lifting and service furniture
Storage directions: Roller/tool cabinets, socket/wrench/bit holders and EVA/BMC modular tool sets; Workshop directions: Creepers, seats, workbench/platforms, wheel dollies and work lights; Handling directions: Jacks, stands, engine stands, motorcycle/wheel and battery-lift enquiries
0370-31 | Hand tools, hardware and repair assortments
Hand-tool directions: Pliers, hand riveters and separate riveter spare-part enquiries; Assortment directions: Sockets/extractors, taps/dies, seals/gaskets, washers, keys, clips, rivets, fittings, fasteners, fuses and feeler gauges; Packing direction: EVA/BMC module or agreed case/assortment layout

This is a sourcing brief, not a quotation, certification, stock confirmation or guaranteed delivery schedule. Confirm the model-specific specification, minimums, sample approval, costs, lead time and contract terms before ordering.