FACTORY SOURCING HUB — INDUSTRIAL MOTORS, PERMANENT-MAGNET SERVO SYSTEMS & INVERTER SOURCING
Page reference: 0376
Send to: kunhuow@gmail.com

Reply email:
Product / reference:
Quantity per model and variation:
Sales market / intended user:
Material / size / performance:
Logo / artwork:
Packaging / labels / carton requirements:
Samples / testing / documents:
Target budget / timing / shipping basis:
Additional requirements:

REFERENCE OPTIONS
0376-01 | Aluminium-frame three-phase induction programme
Frame / power range: 56–160 / 0.12–18.5kW; item-specific pairing to confirm; Listed voltage variants: 220/380, 380/660, 230/400 or 400/690V; Base design reference: Class F; IP55; IC411; removable feet; Mounting directions: B3, B5, B34, B35, V1; Terminal-box positions: Top, right or left; Configuration options to review: Class H; IP56/IP65/IP66; IC410/IC416; PTC/PTO/PT100/heater; C3/C4 paint; special shaft; 1.1/1.2 service-factor options; Efficiency-class designation: IE4 catalogue direction; exact test evidence required
0376-02 | Cast-iron-frame three-phase induction programme
Frame / power range: 71–355 / 0.12–315kW; item-specific pairing to confirm; Listed voltage variants: 220/380, 380/660, 230/400 or 400/690V; Base design reference: Class F; IP55; IC411; solid feet; Mounting directions: B3, B5, B34, B35, V1; Terminal-box positions: Top, right or left; Options to review: Special voltage/shaft, thermal sensors/heater, paint, insulation, protection/cooling and service-factor choices; Efficiency-class designation: IE4 catalogue direction; exact test evidence required
0376-03 | Single-phase aluminium motor programme
Construction directions: Run-capacitor, start-capacitor or dual-capacitor variants; aluminium frame; Frame / power range: 56–100 / 0.09–3kW; item-specific pairing to confirm; Supply alternatives: 110, 220, 230 or 240V; 50 or 60Hz variant to approve; Mounting directions: B3, B5, B34, B35, B14; Base design reference: Class F; IP55; IC411
0376-04 | Stainless-steel motor programme
Power / frame references: 1/3–10HP; frame 56–256; actual pairing to confirm; Voltage reference: 208–230/460V; Catalogue speed families: 3600, 1800 or 1200rpm; actual nameplate speed to approve; Enclosures / design: TEFC or TENV; double VPI; shaft slingers; endbell O-rings; Body / terminal design: Stainless steel; round epoxy-sealed conduit-box direction; Base protection / service-factor fields: IP66; 1.15 at 60Hz / 1.0 at 50Hz; Other options: C-face/footless; square conduit-box IP55 configuration; Inverter-duty references: 15:1 constant torque; 30:1 variable torque; actual conditions to approve
0376-05 | Compact permanent-magnet servo reference — 200W
Rated power / voltage field: 200W; AC220V; actual motor/drive supply to approve; Rated / maximum speed: 3000 / 6000rpm; Rated / peak torque: 0.64 / 1.92N·m; Rated / peak current: 1.7 / 5.7A; Feedback / design: 17- or 23-bit absolute magnetic-encoder direction; class F; IP65; Body / mass references: Without brake: L75mm, 0.8kg; with brake: L104.5mm, 1.1kg
0376-06 | Air-cooled servo reference — 70N·m rated torque
Supply / current fields: 380V; 26A rated / 83A peak; Rated / maximum speed: 2000 / 2200rpm; Rated / peak torque: 70 / 210N·m; Feedback / design: One-pole-pair resolver; class F; IP54; Stated mass: 49.8kg; Drawing dimensions: Body L467mm; foot dimension L1=321mm; drawing interpretation to approve
0376-07 | Oil-cooled servo reference — 30.3kW
Rated power / supply: 30.3kW / 380V; Rated / peak current: 49.8 / 154A; Rated / maximum speed: 1700 / 2000rpm; Rated / peak torque: 170 / 510N·m; Feedback / design: One-pole-pair resolver; class F; IP65; Stated mass: 86kg
0376-08 | Vehicle permanent-magnet motor reference — 18kW
Battery-system voltage / duty: 320V DC / S9; Rated / peak power: 18 / 42kW; Rated / maximum speed: 3000 / 8000rpm; Rated / maximum torque: 57 / 175N·m; Cooling / design: Natural-cooling reference; class H; IP65; Mass / sensors: 47kg; resolver and NTC temperature-sensor directions
0376-09 | Vector and V/F inverter programme
Supply alternatives: Single-phase 220V; three-phase 220/380/480/520/690/1140V variants; Control / communication: Open-loop SVC; closed-loop FVC; V/F and separation directions; Modbus-RTU; Frequency fields: Output 0–500Hz; carrier 0.5–16kHz; Speed range / stability references: SVC 1:100 / ±0.5%; FVC 1:1000 / ±0.02%; Torque-precision field: ±5% FVC; actual conditions required; Overload, G / P selections: G: 150% rated current 60s, 180% 3s; P: 120% 60s, 150% 3s; Programming / process: Expansion-card programming, PID, up to 16 speeds and PLC directions; Feedback / thermal options: Differential, open-collector, resolver or UVW; PT100/PT1000 support
0376-10 | IEC, NEMA and regional induction-motor enquiries
Programme directions: Three-phase induction, aluminium/steel-sheet/stainless variants, NEMA and GOST-envelope enquiries; Efficiency brief: Catalogue-labelled efficiency ranges can be compared using actual current test records; Quotation inputs: Power, speed, supply, shaft/mounting, duty and destination
0376-11 | Variable-speed, multi-speed, brake and open motors
Directions: Pole-changing multi-speed; variable-frequency; electromagnetic brake; ODP; high-power induction; Quotation inputs: Speed range, starting/braking, inertia, enclosure, supply and interface drawing
0376-12 | High-voltage and specialist-duty motors
Direction: Medium/high-voltage and specialist motor programmes; Required brief: Voltage/power, duty, mounting, environment and relevant marine/fire/hazardous-area requirements; Evidence request: Exact current motor nameplate, design file and applicable test/conformity documents
0376-13 | Direct-drive, high-speed and large-fan permanent-magnet programmes
Directions: Permanent-magnet direct drive; high-speed synchronous; large-fan motor/driver enquiries; Quotation inputs: Torque/speed duty, inertia, mounting, drive, feedback and cooling
0376-14 | Compressor electric-drive and integrated/separate layouts
Directions: Permanent-magnet integrated/separate and oil-cooled integrated/separate layouts; induction alternatives; Enclosure-design references: IP23 or IP55 catalogue directions by selection; actual evidence required; Quotation inputs: Compressor interface, speed/torque, drive/control, cooling and included components
0376-15 | Custom motor, retrofit and remanufacturing assessment
Project directions: Special/customised motors, motor-system integration, retrofit or remanufacturing assessment; Options to discuss: Winding/voltage, shaft, mounting, feedback/brake, thermal protection, finish and cooling; Quotation inputs: Existing item/drawing, duty, desired change, inspection and validation requirements

This is a sourcing brief, not a quotation, certification, stock confirmation or guaranteed delivery schedule. Confirm the model-specific specification, minimums, sample approval, costs, lead time and contract terms before ordering.