Measuring tapes
Select blade length and width, scale, lock, hook, case material and packing as one configuration.
Enquire about this range ↗Measuring tapes · knives and blades · drivers · laser tools
Measuring, Cutting & Driving Tools Build a Matched Tool Range
Measuring Tapes, Utility Knives, Screwdrivers & Tool Sourcing
Source measuring tapes, utility knives, replacement blades, screwdrivers, driver bits, hex keys, laser measurement tools and complementary hand-tool and powered-equipment enquiries through one trade contact.
- Compare article-specific materials, mechanisms, dimensions and packing
- Match blades, profiles, drives and supplied assortments to the actual job
- Coordinate samples, technical documents, artwork and inspection requirements
Manufacturing, product documents and order conditions depend on the model and supply route selected for your project.
Start with a product reference, intended use and estimated quantity. We bring product selection, sample questions and quotation details into one conversation.
Email your reference image ↗Core rangeMeasuring, cutting and driving tools
Configuration planningMaterials, interfaces, mechanisms and component lists
Commercial selectionQuantity, sample, inspection, artwork and packing
Enquirieskunhuow@gmail.com
Explore the product range
Build the range
your buyers need.
Choose a focused product or discuss a coordinated assortment. Each direction can be developed into a more specific model and packaging brief.
Utility knives
Compare shell or liner, grip, slider and replacement arrangements; approve the selected blade interface.
Enquire about this range ↗Replacement blades
Material, thickness, tip, segmentation, finish and holder fit need an exact drawing and sample.
Enquire about this range ↗Laser measurement and levels
Discuss line layout, measurement duties, accuracy, working conditions, receiver and accessories.
Enquire about this range ↗Screwdrivers
Specify tip profiles, shank length, steel, finish, handle, cap and exact assortment.
Enquire about this range ↗Driver bits
Compare profile, labelled length and drive dimensions without assuming interchangeable interfaces.
Enquire about this range ↗Hex keys and hand-tool sets
Define the complete size list, end geometry, material, holder and component bill.
Enquire about this range ↗Pliers and additional hand tools
Send jaw, cutting or gripping duties, working dimensions and the required inspection points.
Enquire about this range ↗Powered tools and handling equipment
Electric screwdriver, drill and trolley/platform enquiries require a task-specific equipment and accessory brief.
Enquire about this range ↗Power-strip enquiries
Confirm supply, plug/outlet and lead arrangements, electrical protections and destination documents for the selected item.
Enquire about this range ↗Reference product directions
Start with a product.
Define the details.
Use these options to describe what you are buying. The public references identify your enquiry; the final model and specification are confirmed before an order.
REFERENCE 0346-01
Thick-blade compact measuring tape
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Blade construction reference
- 0.14 mm before painting
- Dimensions and configurations
6 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 5 m / 16 ft 19 mm 120 3 5 m / 16 ft 25 mm 120 4 5 m / 16 ft 28 mm 120 5 7.5 m / 25 ft 25 mm 60 6 7.5 m / 25 ft 28 mm 60
REFERENCE 0346-02
Magnetic-hook measuring tape
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Blade construction reference
- 0.14 mm before painting
- Hook
- Magnetic
- Blade surface
- Nylon film
- Dimensions and configurations
4 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 5 m / 16 ft 19 mm 120 3 5 m / 16 ft 25 mm 120 4 7.5 m / 25 ft 25 mm 60
REFERENCE 0346-03
Compact tape with wide-blade options
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Blade construction reference
- 0.14 mm
- Dimensions and configurations
5 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 5 m / 16 ft 19 mm 120 3 5 m / 16 ft 28 mm 120 4 7.5 m / 25 ft 28 mm 60 5 Confirm labelled length 28 mm 48
REFERENCE 0346-04
Automatic-lock measuring tape
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Case options
- ABS; overmoulded ABS; plated and overmoulded case
- Lock
- Automatic button lock
- Dimensions and configurations
9 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 Confirm labelled length 16 mm 180 3 5 m / 16 ft 19 mm 120 4 5.5 m / 18 ft 19 mm 120 5 5 m / 16 ft 25 mm 120 6 5.5 m / 18 ft 25 mm 120 7 7.5 m / 25 ft 25 mm 60 8 8 m / 27 ft 25 mm 60 9 10 m / 33 ft 25 mm 48
REFERENCE 0346-05
Two-colour moulded measuring tape
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Case construction
- Two-colour injection moulding
- Retraction reference
- Cushioned return; selected mechanism to confirm
- Dimensions and configurations
4 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 5 m / 16 ft 19 mm 120 3 5 m / 16 ft 25 mm 120 4 7.5 m / 25 ft 25 mm 60
REFERENCE 0346-06
Overmoulded compact measuring tape
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Blade construction reference
- 0.125 mm before painting
- Case
- Secondary overmoulding
- Dimensions and configurations
5 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 5 m / 16 ft 19 mm 120 3 5 m / 16 ft 22 mm 120 4 Confirm labelled length 28 mm 120 5 7.5 m / 25 ft 28 mm 120
REFERENCE 0346-07
Compact measuring tape with thickened blade
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Blade construction reference
- 0.14 mm before painting
- Dimensions and configurations
5 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 5 m / 16 ft 19 mm 120 3 5 m / 16 ft 25 mm 120 4 Confirm labelled length 28 mm 120 5 7.5 m / 25 ft 25 mm 60
REFERENCE 0346-08
Measuring tape with three stop buttons
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Stop controls
- 3
- Dimensions and configurations
9 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 Confirm labelled length 16 mm 180 3 5 m / 16 ft 19 mm 120 4 5.5 m / 18 ft 19 mm 120 5 5 m / 16 ft 25 mm 120 6 5.5 m / 18 ft 25 mm 120 7 7.5 m / 25 ft 25 mm 60 8 8 m / 27 ft 25 mm 60 9 10 m / 33 ft 25 mm 60
REFERENCE 0346-09
Compact tape with thin-blade reference
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Blade construction reference
- 0.125 mm before painting
- Dimensions and configurations
5 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 5 m / 16 ft 19 mm 120 3 5 m / 16 ft 22 mm 120 4 Confirm labelled length 28 mm 120 5 7.5 m / 25 ft 28 mm 120
REFERENCE 0346-10
Nylon-film compact measuring tape
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Blade surface
- Nylon film
- Dimensions and configurations
4 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 5 m / 16 ft 19 mm 120 3 5 m / 16 ft 25 mm 120 4 7.5 m / 25 ft 25 mm 60
REFERENCE 0346-11
ABS-case measuring tape with steel spring
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Case and reel
- ABS
- Spring
- 65Mn steel
- Hook finish
- Chrome plated
- Dimensions and configurations
11 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 Confirm labelled length 13 mm 240 2 Confirm labelled length 16 mm 180 3 3 m / 10 ft 16 mm 180 4 Confirm labelled length 16 mm 180 5 5 m / 16 ft 19 mm 120 6 5.5 m / 18 ft 19 mm 120 7 5 m / 16 ft 25 mm 120 8 5.5 m / 18 ft 25 mm 120 9 7.5 m / 25 ft 25 mm 60 10 8 m / 27 ft 25 mm 60 11 10 m / 33 ft 25 mm 60 - Blade material reference
- High-carbon steel
- Blade scale
- Printed on both sides; accuracy to confirm
- Hook treatment reference
- Heat-treated; chrome plated
REFERENCE 0346-12
Nylon-coated measuring tape
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Blade construction reference
- 0.14 mm
- Blade surface
- Nylon coating
- Dimensions and configurations
8 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 Confirm labelled length 16 mm 180 3 5 m / 16 ft 19 mm 120 4 5.5 m / 18 ft 19 mm 120 5 5 m / 16 ft 25 mm 120 6 5.5 m / 18 ft 25 mm 120 7 7.5 m / 25 ft 25 mm 60 8 8 m / 27 ft 25 mm 60
REFERENCE 0346-13
Compact thickened-blade tape reference
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Blade construction reference
- 0.125 mm before painting
- Dimensions and configurations
4 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 5 m / 16 ft 19 mm 120 3 5 m / 16 ft 25 mm 120 4 7.5 m / 25 ft 25 mm 120
REFERENCE 0346-14
Transparent-PC measuring tape
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Case
- Transparent PC
- Hook construction
- Spring hook
- Dimensions and configurations
6 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 Confirm labelled length 13 mm 240 2 3 m / 10 ft 16 mm 180 3 5 m / 16 ft 19 mm 120 4 5 m / 16 ft 25 mm 120 5 7.5 m / 25 ft 25 mm 60 6 Confirm labelled length 33 mm 60
REFERENCE 0346-15
Contoured compact measuring tape
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Blade construction reference
- 0.125 mm
- Dimensions and configurations
5 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 Confirm labelled length 19 mm 120 3 5 m / 16 ft 19 mm 120 4 5 m / 16 ft 25 mm 120 5 7.5 m / 25 ft 25 mm 60
REFERENCE 0346-16
Compact contoured tape with thickened blade
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Blade construction reference
- 0.125 mm before painting
- Dimensions and configurations
4 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 5 m / 16 ft 19 mm 120 3 5 m / 16 ft 25 mm 120 4 7.5 m / 25 ft 25 mm 120
REFERENCE 0346-17
Compact measuring tape with double brake
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Brake reference
- Double brake
- Dimensions and configurations
4 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 5 m / 16 ft 19 mm 120 3 5 m / 16 ft 25 mm 120 4 7.5 m / 25 ft 25 mm 120
REFERENCE 0346-18
Transparent-PC tape with bottom control
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Case
- Transparent PC; 5 fixing screws
- Control
- Bottom button
- Dimensions and configurations
9 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 Confirm labelled length 16 mm 180 3 5 m / 16 ft 19 mm 120 4 5.5 m / 18 ft 19 mm 120 5 5 m / 16 ft 25 mm 120 6 5.5 m / 18 ft 25 mm 120 7 7.5 m / 25 ft 25 mm 60 8 8 m / 27 ft 25 mm 60 9 10 m / 33 ft 25 mm 48
REFERENCE 0346-19
Compact measuring tape configuration
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Blade construction reference
- 0.125 mm before painting
- Dimensions and configurations
4 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 5 m / 16 ft 19 mm 120 3 5 m / 16 ft 25 mm 120 4 7.5 m / 25 ft 25 mm 120
REFERENCE 0346-20
Measuring tape with pause function
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Control
- Pause function; operation to confirm
- Dimensions and configurations
4 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 5 m / 16 ft 19 mm 120 3 5 m / 16 ft 25 mm 120 4 7.5 m / 25 ft 25 mm 120
REFERENCE 0346-21
Bottom-opening pause measuring tape
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Control
- Bottom opening used as pause button
- Dimensions and configurations
4 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 16 mm 180 2 5 m / 16 ft 19 mm 120 3 5 m / 16 ft 25 mm 120 4 7.5 m / 25 ft 25 mm 120
REFERENCE 0346-22
Measuring tape with narrow-width options
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Dimensions and configurations
7 listed configurations · view dimensions
Configuration | Nominal labelled length | Blade width | Units per carton Configuration Nominal labelled length Blade width Units per carton 1 3 m / 10 ft 13 mm 180 2 Confirm labelled length 13 mm 180 3 5 m / 16 ft 19 mm 120 4 5.5 m / 18 ft 19 mm 120 5 5 m / 16 ft 25 mm 120 6 5.5 m / 18 ft 25 mm 120 7 7.5 m / 25 ft 25 mm 60
REFERENCE 0346-23
Mini promotional measuring tape
Confirm the selected length, scale, accuracy, blade, hook, lock and case. Carton counts describe packing; approve current dimensions and packaging.
- Configuration | Nominal labelled length | Blade width | Units per carton
- 1 | Confirm labelled length | 6 mm | 960
REFERENCE 0346-24
Dual-slider zinc-alloy utility knife
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Handle
- Zinc alloy; soft covering
- Controls
- Normal and automatic-return sliders
- Blade storage
- Built-in blade
REFERENCE 0346-25
Painted zinc-alloy utility knives
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Handle
- Zinc alloy
- Surface
- Painted
REFERENCE 0346-26
Utility knife with wrench-hole features
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Secondary feature
- 5 hexagonal wrench holes; actual sizes to confirm
REFERENCE 0346-27
Polymer-shell utility knife
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Shell
- ABS + PC blend
REFERENCE 0346-28
Spring-return utility knife
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Control
- Spring-return slider
- Blade replacement
- Rear-plug removal arrangement
REFERENCE 0346-29
Utility knife with 1 mm liner
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Liner
- Stainless steel; 1 mm
- Grip
- TPE overmoulding
REFERENCE 0346-30
Utility knife with 0.8 mm liner and grip
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Liner
- Stainless steel; 0.8 mm
- Grip
- TPE overmoulding
REFERENCE 0346-31
Black-treated steel-liner utility knives
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Liner
- Stainless steel; 0.8 mm; heat-treated
- Surface
- Black treatment
REFERENCE 0346-32
Utility knife with 0.5 mm liner and grip
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Liner
- Stainless steel; 0.5 mm
- Grip
- TPE overmoulding
REFERENCE 0346-33
Utility knife with spare-blade storage
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Liner
- Stainless steel; 1 mm
- Stored spare blades
- 2
- Features
- Tail blade-snap feature; wire-stripping groove
REFERENCE 0346-34
Utility knife configuration enquiry
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
REFERENCE 0346-35
Utility knife with tail snap feature
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Liner
- Stainless steel; 0.6 mm
- Feature
- Tail blade-snap arrangement
REFERENCE 0346-36
Hollow single-blade utility knife
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Construction reference
- Hollow design; single blade
REFERENCE 0346-37
Utility knife with 0.5 mm steel liner
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Liner
- Stainless steel; 0.5 mm
REFERENCE 0346-38
Utility knife with 0.8 mm steel liner
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Liner
- Stainless steel; 0.8 mm
REFERENCE 0346-39
Additional utility-knife configuration enquiry
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
REFERENCE 0346-40
Clip-equipped utility knife
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Liner
- Stainless steel; 0.6 mm
- Features
- Pocket clip; hanging hole
- Additional features
- Tail blade-snap feature; front carton-opening and nail-lifting features; exact duty to confirm
REFERENCE 0346-41
Compact knife with 0.5 mm liner
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
- Liner
- Stainless steel; 0.5 mm
REFERENCE 0346-42
Compact utility-knife configuration enquiry
Confirm the blade interface, locking and replacement arrangement, selected dimensions and supplied spare blades on the approved sample.
REFERENCE 0346-43
Self-levelling multi-plane line lasers
Specify the layout, working distance, receiver and accessories. Confirm laser safety information, accuracy, operating limits and geometry for the exact configuration.
- Plane reference
- 3 × 360°
- Cross reference
- 6 crosses
- Geometry reference
- Vertical line to wall 6 mm; horizontal line to floor 8 mm
- Operating modes
- Continuous or pulsed laser; tilt operation
- Levelling indication
- Automatic levelling; out-of-range flashing and sound
REFERENCE 0346-44
Self-levelling laser configuration enquiries
Provide the work area, line layout, working distance, accuracy and required accessories. Request the selected configuration’s laser safety and environmental test documents.
- Function reference
- Automatic levelling
REFERENCE 0346-45
Textured-tip multicolour-handle screwdriver
Specify tip profiles, working lengths, shank and handle construction. Confirm the exact steel, finish, magnetism and supplied size assortment for the selected article.
- Handle reference
- Three-colour
- Tip reference
- Textured surface; exact treatment to confirm
REFERENCE 0346-46
Screwdriver size-assortment reference 1
Specify tip profiles, working lengths, shank and handle construction. Confirm the exact steel, finish, magnetism and supplied size assortment for the selected article.
- Tip directions
- Cross-head PH0, PH1 and PH2; slotted dimensions to confirm
- Shank finish
- Black treatment
- Tip surface
- Textured; composition and treatment to confirm
REFERENCE 0346-47
Screwdriver size-assortment reference 2
Specify tip profiles, working lengths, shank and handle construction. Confirm the exact steel, finish, magnetism and supplied size assortment for the selected article.
- Tip directions
- Cross-head PH0, PH1 and PH2; slotted dimensions to confirm
- Shank finish
- Black treatment
- Tip surface
- Textured; composition and treatment to confirm
REFERENCE 0346-48
Screwdriver size-assortment reference 3
Specify tip profiles, working lengths, shank and handle construction. Confirm the exact steel, finish, magnetism and supplied size assortment for the selected article.
- Tip directions
- Cross-head PH0, PH1 and PH2; slotted dimensions to confirm
- Shank finish
- Black treatment
- Tip surface
- Textured; composition and treatment to confirm
REFERENCE 0346-49
Rotating-cap screwdrivers
Specify tip profiles, working lengths, shank and handle construction. Confirm the exact steel, finish, magnetism and supplied size assortment for the selected article.
- Steel directions
- 6150 chromium-vanadium or S2; exact variant to confirm
- Handle
- Elastic resin and PP
- Cap reference
- Bearing at handle end
- Shank surface
- Bright chrome
- Tip
- Phosphated black; magnetic reference
REFERENCE 0346-50
Resin and polymer-handle screwdrivers
Specify tip profiles, working lengths, shank and handle construction. Confirm the exact steel, finish, magnetism and supplied size assortment for the selected article.
- Steel directions
- 6150 chromium-vanadium or S2; exact variant to confirm
- Handle
- Elastic resin and high-strength polymer
- Shank surface
- Bright chrome
- Tip
- Phosphated black; magnetic reference
REFERENCE 0346-51
Transparent-PVC-handle screwdrivers
Specify tip profiles, working lengths, shank and handle construction. Confirm the exact steel, finish, magnetism and supplied size assortment for the selected article.
- Steel directions
- 6150 chromium-vanadium or S2; exact variant to confirm
- Handle
- Transparent PVC
- Shank surface
- Bright chrome
- Tip
- Phosphated black; magnetic reference
REFERENCE 0346-52
Acetate-handle screwdrivers
Specify tip profiles, working lengths, shank and handle construction. Confirm the exact steel, finish, magnetism and supplied size assortment for the selected article.
- Steel directions
- 6150 chromium-vanadium or S2; exact variant to confirm
- Handle
- Acetate
- Shank surface
- Bright chrome
- Tip
- Phosphated black; magnetic reference
REFERENCE 0346-53
Polymer-handle screwdriver assortment
Specify tip profiles, working lengths, shank and handle construction. Confirm the exact steel, finish, magnetism and supplied size assortment for the selected article.
- Handle
- Elastic resin and high-strength polymer
REFERENCE 0346-54
Screwdrivers with cross-hole feature
Specify tip profiles, working lengths, shank and handle construction. Confirm the exact steel, finish, magnetism and supplied size assortment for the selected article.
- Handle
- Elastic resin and high-strength polymer
- Feature
- Cross-hole for additional driving arrangement; tool limits to confirm
REFERENCE 0346-55
Strike-cap screwdriver enquiry
Specify tip profiles, working lengths, shank and handle construction. Confirm the exact steel, finish, magnetism and supplied size assortment for the selected article.
- Handle
- Elastic resin and high-strength polymer
- Top construction reference
- Designed for striking; exact duty and limits to confirm
REFERENCE 0346-56
PVC-blend screwdriver with cross hole
Specify tip profiles, working lengths, shank and handle construction. Confirm the exact steel, finish, magnetism and supplied size assortment for the selected article.
- Handle
- Elastic resin and PVC
- Feature
- Cross-hole; permitted driving arrangement to confirm
REFERENCE 0346-57
Polymer-handle strike-cap screwdriver
Specify tip profiles, working lengths, shank and handle construction. Confirm the exact steel, finish, magnetism and supplied size assortment for the selected article.
- Handle
- High-strength polymer
- Top construction reference
- Designed for striking; exact duty and limits to confirm
REFERENCE 0346-58
Magnetic-tip polymer-handle screwdrivers
Specify tip profiles, working lengths, shank and handle construction. Confirm the exact steel, finish, magnetism and supplied size assortment for the selected article.
- Steel directions
- 6150 chromium-vanadium or S2; exact variant to confirm
- Handle
- High-strength polymer
- Shank surface
- Bright chrome
- Tip
- Phosphated black; magnetic reference
REFERENCE 0346-59
Metric hex-key set
Specify the exact size list, key lengths, end geometry, steel and holder. Confirm the approved bill of materials and sample.
- Set reference
- 8 pieces; metric
REFERENCE 0346-60
Ten-piece hex-key set
Provide the required size system, complete size list, key lengths, end geometry, steel and holder.
- Set reference
- 10 pieces
REFERENCE 0346-61
Extended centre-hole star-key set
Specify profiles and key dimensions, then confirm fit, finish and the exact tool assortment.
- Set reference
- 9 pieces
- Steel direction
- 50 chromium-vanadium steel; grade to confirm
- Surface reference
- Sprayed and UV-coated
REFERENCE 0346-62
Colour-coded hex keys
Send the size list, end geometry, lengths, steel and holder requirements; approve the actual assortment and markings.
- Presentation reference
- Multicolour
REFERENCE 0346-63
Special-geometry hex-key enquiries
Provide the fastener profile, access drawing, required dimensions and size list. Confirm the proposed tool and holder on a sample.
REFERENCE 0346-64
Dodecagon driver bit, 30 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Dodecagon
- Length reference
- 30 mm
- Drive reference
- 8.0 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-65
Hex driver bit, 30 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Hex
- Length reference
- 30 mm
- Drive reference
- 8.0 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-66
Star driver bit, 30 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Star
- Length reference
- 30 mm
- Drive reference
- 8.0 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-67
Cross driver bit, 30 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Cross
- Length reference
- 30 mm
- Drive reference
- 8.0 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-68
Slotted driver bit, 30 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Slotted
- Length reference
- 30 mm
- Drive reference
- 8.0 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-69
Dodecagon driver bit, 70 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Dodecagon
- Length reference
- 70 mm
- Drive reference
- 8.0 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-70
Cross driver bit, 70 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Cross
- Length reference
- 70 mm
- Drive reference
- 8.0 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-71
Slotted driver bit, 70 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Slotted
- Length reference
- 70 mm
- Drive reference
- 8.0 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-72
Hex driver bit, 70 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Hex
- Length reference
- 70 mm
- Drive reference
- 8.0 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-73
Star driver bit, 70 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Star
- Length reference
- 70 mm
- Drive reference
- 8.0 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-74
Hex driver bit, 25 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Hex
- Length reference
- 25 mm
- Drive reference
- 6.3 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-75
Star driver bit, 25 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Star
- Length reference
- 25 mm
- Drive reference
- 6.3 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-76
Additional-cross-profile driver bit, 25 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Additional-cross-profile
- Length reference
- 25 mm
- Drive reference
- 6.3 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-77
Cross driver bit, 25 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Cross
- Length reference
- 25 mm
- Drive reference
- 6.3 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-78
Slotted driver bit, 25 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Slotted
- Length reference
- 25 mm
- Drive reference
- 6.3 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-79
Star with centre hole driver bit, 25 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Star with centre hole
- Length reference
- 25 mm
- Drive reference
- 6.3 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-80
Star driver bit, 50 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Star
- Length reference
- 50 mm
- Drive reference
- 6.3 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-81
Slotted driver bit, 50 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Slotted
- Length reference
- 50 mm
- Drive reference
- 6.3 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-82
Cross driver bit, 50 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Cross
- Length reference
- 50 mm
- Drive reference
- 6.3 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-83
Additional-cross-profile driver bit, 50 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Additional-cross-profile
- Length reference
- 50 mm
- Drive reference
- 6.3 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-84
Hex driver bit, 50 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Hex
- Length reference
- 50 mm
- Drive reference
- 6.3 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-85
Star with centre hole driver bit, 50 mm
Confirm the actual profile drawing, mating drive, hardness and size marking for the application. Listed drive dimensions are not rounded to an assumed standard interface.
- Profile reference
- Star with centre hole
- Length reference
- 50 mm
- Drive reference
- 6.3 mm
- Listed material
- S2 alloy steel
REFERENCE 0346-86
Replacement blade — reference 1
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
REFERENCE 0346-87
Replacement blade with black finish — reference 2
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Finish reference
- Black treatment
REFERENCE 0346-88
Acute-tip blade — reference 3
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Tip-angle reference
- 30°
REFERENCE 0346-89
Acute-tip blade with black finish — reference 4
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Tip-angle reference
- 30°
- Finish reference
- Black treatment
REFERENCE 0346-90
Acute-tip blade — reference 5
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK2 + Cr
- Tip-angle reference
- 30°
REFERENCE 0346-91
Replacement blade — reference 6
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK2 + Cr
- Hardness reference
- HV860; test load and method to confirm
REFERENCE 0346-92
Replacement blade with black finish — reference 7
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK2 + Cr
- Finish reference
- Black treatment
REFERENCE 0346-93
Acute-tip blade with black finish — reference 8
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK2 + Cr
- Tip-angle reference
- 30°
- Finish reference
- Black treatment
REFERENCE 0346-94
Segmented blade — reference 9
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Listed segment count
- 8
REFERENCE 0346-95
Segmented blade — reference 10
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Listed segment count
- 15
REFERENCE 0346-96
Segmented blade — reference 11
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Listed segment count
- 15
REFERENCE 0346-97
Segmented blade — reference 12
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Listed segment count
- 8
REFERENCE 0346-98
Segmented blade with black finish — reference 13
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Listed segment count
- 15
- Finish reference
- Black treatment
REFERENCE 0346-99
Segmented blade with black finish — reference 14
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Listed segment count
- 8
- Finish reference
- Black treatment
REFERENCE 0346-100
Segmented blade — reference 15
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Listed segment count
- 15
REFERENCE 0346-101
Segmented blade — reference 16
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Listed segment count
- 8
REFERENCE 0346-102
Segmented blade with black finish — reference 17
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Listed segment count
- 15
- Finish reference
- Black treatment
REFERENCE 0346-103
Segmented blade with black finish — reference 18
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Listed segment count
- 15
- Finish reference
- Black treatment
REFERENCE 0346-104
Segmented blade — reference 19
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Thickness reference
- 0.6 mm
- Listed segment count
- 15
REFERENCE 0346-105
Segmented blade — reference 20
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Thickness reference
- 0.6 mm
- Listed segment count
- 8
REFERENCE 0346-106
Segmented blade with black finish — reference 21
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Thickness reference
- 0.6 mm
- Listed segment count
- 15
- Finish reference
- Black treatment
REFERENCE 0346-107
Segmented blade — reference 22
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- CK75
- Listed segment count
- 15
REFERENCE 0346-108
Segmented blade — reference 23
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- CK75
- Thickness reference
- 0.6 mm
- Listed segment count
- 8
REFERENCE 0346-109
Segmented blade — reference 24
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- CK75
- Thickness reference
- 0.6 mm
- Listed segment count
- 15
REFERENCE 0346-110
Segmented blade — reference 25
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- CK75
- Listed segment count
- 8
REFERENCE 0346-111
Segmented blade — reference 26
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK2 + Cr
- Listed segment count
- 8
REFERENCE 0346-112
Segmented blade — reference 27
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK2 + Cr
- Listed segment count
- 15
- Hardness reference
- HV860; test load and method to confirm
REFERENCE 0346-113
Segmented blade with black finish — reference 28
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK2 + Cr
- Listed segment count
- 15
- Finish reference
- Black treatment
REFERENCE 0346-114
Segmented blade with black finish — reference 29
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK2 + Cr
- Listed segment count
- 8
- Finish reference
- Black treatment
REFERENCE 0346-115
Trapezoid blade — reference 30
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
REFERENCE 0346-116
Trapezoid blade with black finish — reference 31
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Finish reference
- Black treatment
REFERENCE 0346-117
Trapezoid blade — reference 32
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK2 + Cr
- Hardness reference
- HV860; test load and method to confirm
REFERENCE 0346-118
Trapezoid blade with black finish — reference 33
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK2 + Cr
- Finish reference
- Black treatment
REFERENCE 0346-119
Replacement blade — reference 34
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
REFERENCE 0346-120
Replacement blade with black finish — reference 35
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Finish reference
- Black treatment
REFERENCE 0346-121
Replacement blade — reference 36
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK2 + Cr
- Hardness reference
- HV860; test load and method to confirm
REFERENCE 0346-122
Replacement blade with black finish — reference 37
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK2 + Cr
- Finish reference
- Black treatment
REFERENCE 0346-123
Replacement blade — reference 38
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
REFERENCE 0346-124
Replacement blade with black finish — reference 39
Specify the blade drawing, width, length, thickness, notches and holder interface. Approve the selected material, edge, replacement procedure and pack quantity before ordering.
- Listed blade material
- SK4
- Finish reference
- Black treatment
REFERENCE 0346-125
Tape-measure configuration enquiries
Send the required length, blade width, scale system, hook, lock, case and accuracy requirement for a current quotation.
REFERENCE 0346-126
Additional knife and replacement-blade enquiries
Provide the cutting task, blade drawing, locking arrangement, supplied spares and package requirements.
REFERENCE 0346-127
Laser measurement and level enquiries
Specify distance or line-layout duties, required accuracy, working environment, accessories and current product documents.
REFERENCE 0346-128
Driver and hex-key configuration enquiries
Send the fastener profiles, size list, shank and handle construction, quantity and storage requirements.
REFERENCE 0346-129
Pliers and cutting-tool enquiries
Specify jaw type, opening, material, dimensions and cutting task. Confirm the exact tool and required function checks.
REFERENCE 0346-130
Powered-equipment configuration enquiries
Describe the intended task, tool type, supply, interfaces and accessories. Confirm the actual equipment and supplied components in the quotation.
REFERENCE 0346-131
Power-strip configuration enquiries
Specify outlet and plug arrangements, input supply, lead arrangement, markings and required electrical documents. Confirm the exact configuration and any protection functions.
REFERENCE 0346-132
Electric screwdriver and drill enquiries
Provide the fastening or drilling task, required torque or capacity, power supply, battery and charger arrangement, accessories and acceptance criteria.
REFERENCE 0346-133
Wrench, measuring and mixed hand-tool assortments
Send the individual tool list, fastener systems, measuring duties, size coverage, quantity and case layout. Request a complete bill of materials and sample.
REFERENCE 0346-134
Screwdriver with handle-material confirmation
Specify tip profiles, working lengths, shank and handle construction. Confirm the exact steel, finish, magnetism and supplied size assortment for the selected article.
- Steel directions
- 6150 chromium-vanadium or S2; exact variant to confirm
- Cap reference
- Bearing at handle end
- Shank surface
- Bright chrome
- Tip
- Phosphated black; magnetic reference
REFERENCE 0346-135
Trolley and platform-equipment enquiries
Send the handling task, platform or trolley arrangement, required load, working dimensions, wheels, mechanism and packing. Confirm the selected configuration and its operating limits.
The entries are separate configuration references. Carton quantities describe packing, not a minimum order. Tape length pairs are nominal labels; confirm the actual measurement scale and accuracy. Where a dimension or role is unclear, request the selected configuration’s drawing rather than deriving it from a model code. Confirm all current specifications, supplied components and order conditions in the quotation.
What matters for this category
A better brief.
A clearer comparison.
Focus the sourcing conversation on the features, materials and production details that make a difference to your product range.
One itemised sourcing brief
Bring measuring, cutting and driving requirements into a coordinated enquiry. Keep specifications and quantities separate for each item so comparisons remain clear.
Match the tool to the task
Select blade and holder, bit and drive, tip and fastener, or measuring range and working environment together. Check the actual sample before approving the assortment.
Plan a consistent range
Coordinate tool selection, accessory lists, presentation and packing around the intended customer and destination. Record approved substitutions and supply conditions by item.
Branding, configuration & packaging
Make the product
fit your programme.
Bring artwork, reference samples and a target cost. The available process, minimum quantity, sample charges and development scope are reviewed for the chosen option.
Product and assortment brief
Discuss materials, mechanisms, dimensions, profiles, size lists and case layouts against a drawing or sample. Feasibility, tooling and development charges require a project quotation.
Presentation and packing
Provide lawful artwork, colour preferences, label language, barcode and retail/outer packing requirements. Approve proofs and the actual packed sample.
Sample and order planning
Specify sample quantities and evaluation needs. Confirm item quantities, minimum order, sample costs, production timing and shipment terms in the current quotation.
Quality & product evidence
Turn requirements
into checks.
Agree which product characteristics need testing and how the approved sample relates to the bulk order.
Measurement and fit
Agree scale and dimensional checks, hook compensation, blade/holder fit, tip engagement and drive interfaces for the selected article. Use a defined method and acceptance criterion.
Construction and function
Check the actual material, finish, liner, grip, slider or lock, blade replacement and supplied assortment as applicable. Define torque, edge and mechanism evaluations against the intended task.
Electrical and delivery checks
Powered, laser and electrical selections need their own supply, operating and document review. Check labels, instructions, component counts, measured packing and the shipment list.
Test capability is a starting point for the inspection plan. Request the method, applicable model and results needed for your order.
Documents matched to the order
Ask for evidence
that fits the product.
Send the intended task, exact configuration and destination to identify the technical and shipment information needed for the enquiry.
State the sales market, intended users and required files in your first enquiry. Current validity and scope are checked for the selected supplier and product; a category description does not certify every item.
Share your document requirements ↗- Selected item specifications
- Request drawings, material and size lists, operating instructions, relevant test conditions and the final component bill.
- Market and transport requirements
- Provide the destination and intended use so applicable measurement, laser, electrical and transport documents can be requested for the actual item.
- Sample and shipment records
- Retain the approved sample, artwork, agreed inspections, measured package and order-specific packing list.
Built around how you sell
Different buyers.
Different specifications.
Your sales channel changes the assortment, packaging and quality priorities. Tell us the intended use as well as the product name.
Retail and distribution
Build measuring, knife, driver and accessory assortments with a defined size list and consistent packaging.
Workshop and installation
Specify cutting, fastening, layout and measurement tasks, tool interfaces and working conditions before selecting equipment.
Project and promotional programmes
Discuss tool selections, lawful artwork, presentation and quantities with current sample and packing requirements.
From first brief to a defined order
One contact.
A practical next step.
Samples, commercial terms and responsibilities are agreed for the project. Use the same product and packing specification when comparing quotations.
Share the requirement
Product, reference image, quantity, sales market and timing.
Compare suitable options
Review configuration, materials, sample scope and relevant documents.
Approve the specification
Agree artwork, packaging, sample, testing and inspection criteria.
Confirm the order plan
Set price, payment, production, delivery and defect remedies in writing.
Buyer questions
Before you send
your first enquiry.
Practical answers about this sourcing direction, customization and the reference options. Your agreed specification and written quotation determine the actual order.
Which products can I enquire about?
Measuring tapes, utility knives, replacement blades, screwdrivers, driver bits, hex keys and laser measurement tools are core directions. Pliers, wrenches, hand-tool sets, powered tools, handling equipment and power strips can be included with a clear specification.
How do I select a measuring tape?
Specify required length, scale system, blade width, case, lock, hook and accuracy requirement. Carton counts are packing references. Confirm the selected scale, dimensions and current pack before ordering.
Are blade thickness and knife-liner thickness the same?
They describe different components. Send the knife and blade drawing or sample, including holder interface, blade width/thickness, liner, slider and supplied spares. Confirm each component separately.
Can I assume similarly labelled bits fit the same tool?
Confirm the actual drive, tip drawing, working length and fastener fit. A rounded nominal label or shared product family does not establish interchangeability.
What does a laser-tool enquiry need?
Provide the measurement or line-layout task, range, accuracy, work environment, receiver and accessories. Request the selected configuration’s operating and laser safety information.
Can you coordinate private-label or mixed-tool assortments?
Yes. Send lawful artwork, the full item and size list, quantities, holder or case layout and packing requirements. Feasibility, samples, tooling and commercial conditions need a current quotation.
Are certification, stock and delivery timing fixed?
Request current documents for the exact item and destination. Availability, minimum order, sample charges, production timing and shipment terms are confirmed in the quotation.
What should I send for a quotation?
Send the product reference or drawing, intended task and destination, required material and dimensions, quantity by item, supplied components, sample/inspection needs and artwork/packing requirements.
Who handles my enquiry?
Factory Sourcing Hub handles this enquiry as an independent sourcing and trading service. The product route, supplier suitability, sample scope and order responsibilities are agreed for the actual project.
How do I get a price and order minimum?
Send the product reference, quantities per variation, customization and packaging. Prices, minimums, sample charges and delivery dates are confirmed in a current quotation; the page is not a live inventory or price feed.
Can I discuss samples and inspection before ordering?
Yes. State whether you need a reference sample, a customized sample or development work. Agree the sample cost and shipping, approval specification, inspection plan and remedy for non-conforming goods before the bulk order.
What should I attach to my email?
Reference images, drawings, logo artwork and a product list are useful. Include quantities, the intended users and sales market, packaging, required documents and timing. After submitting the form, email attachments to kunhuow@gmail.com with your enquiry reference.
Tell us what you are planning
Your next order
starts with a brief.
A reference picture or a short description is enough to begin. Add the details you already know; the optional fields help make the follow-up more useful.
- Tool family, intended task, reference drawing/sample and destination
- Material, dimensions, scale or tip/drive profile, mechanism and component bill
- Quantity by configuration, samples, acceptance checks and relevant documents
- Lawful artwork, label language, case/retail packing and requested shipment window
Download the enquiry checklist ↓
Independent sourcing and trading service. Supplier choice, service costs and order conditions are discussed for your project.
Discuss your requirements.
Product selection, customization, samples and quotation enquiries.
Explore other sourcing directions
More options for
your product list.
Compare separate product ranges and prepare a brief that fits your assortment.
Pliers, Wrenches, Screwdrivers & Hand Tool Kit Sourcing
Source pliers, locking and retaining-ring tools, aviation snips, adjustable wrenches, screwdriver assortments and vehicle, garden or household tool kits with a defined specification and packing list.
Explore this service ↗
Utility Cutters, Replacement Blades, Scrapers & Craft Tools Sourcing
Source utility and folding knives, safety cutters, snap-off cutters, replacement blades, scrapers, precision craft tools, rotary cutters and cutting mats. Compare construction, dimensions and supplied blade arrangements.
Explore this service ↗
Kitchen Knives, Knife Sets, Shears & Preparation-Tool Sourcing
Source kitchen knife sets, chef and slicing knives, fruit and paring knives, bread knives, forged wood- or plastic-handle directions, hollow-handle knives, kitchen shears, sharpeners, cutting boards and related kitchen-tool sets.
Explore this service ↗
Hand, Power & Air Tools, Measurement and Workshop Equipment Sourcing
Coordinate hand tools, tool sets, air and power tools, measurement, abrasives, storage, garden and lifting-equipment enquiries with item-specific specifications.
Explore this service ↗Information basis: published product information reviewed . Reference details support a sourcing discussion. Current supply, samples and product-specific documents are confirmed for the selected item.