Bench vises
Compare fixed and swivel bases, light or heavier layouts, quick-release jaws, reversible formats, replaceable jaws, pipe gripping and anvil arrangements. Confirm body material and actual mounting geometry.
Enquire about this range ↗BENCH · MACHINE · WOODWORKING · PIPE · CLAMPS · ANVILS · CAST COMPONENTS
Specify the Grip, Mounting & Workpiece Coordinate Workholding & Cast Components
Bench Vises, Clamps, Machine Workholding & Cast Component Sourcing
Source bench and table vises, machine and cross-slide workholding, woodworking and pipe clamps, C/F clamps, pipe wrenches, anvils, ADI and selected automotive, construction and electrical fitting components.
- Compare fixed, swivel, quick-release, reversible, machine and woodworking arrangements
- Keep jaw width, opening, throat, pipe range, travel and mounting roles separate
- Coordinate material, finish, drawings, samples, packing and item-specific inspection
Manufacturing, product documents and order conditions depend on the model and supply route selected for your project.
Start with a product reference, intended use and estimated quantity. We bring product selection, sample questions and quotation details into one conversation.
Email your reference image ↗WorkholdingBench, table, machine, drill-press, cross-slide, wood and pipe directions
Material optionsConfiguration-specific grey/ductile iron, fabricated steel and selected forged or alloy tools
Cast componentsAutomotive, engineering, suspension and electrical fitting enquiry directions
Quotation inputsWorkpiece, mounting, dimension roles, material, quantity and destination
Explore the product range
Build the range
your buyers need.
Choose a focused product or discuss a coordinated assortment. Each direction can be developed into a more specific model and packaging brief.
Precision and multi-purpose workholding
Machined-body, rotating-body, steel-beam and round-beam directions provide different geometry. The word precision does not establish an accuracy grade; agree drawings and measurable acceptance criteria.
Enquire about this range ↗Fabricated and offset steel vises
Fabricated-steel and offset arrangements are distinct from cast-body bench vises. Match access around the workpiece, jaw dimensions, mounting and the intended working process.
Enquire about this range ↗Table and portable vises
Clamp-on, dovetail, guide-post and portable woodworking formats support different mounting needs. State bench thickness, accessible space, jaw opening and workpiece material.
Enquire about this range ↗Machine and drill-press vises
Standard, inclinable and precision-locking machine directions accompany simpler drill-press vises. Compare jaw width/height, maximum opening, mounting envelope and the required holding method.
Enquire about this range ↗Cross-slide vises and worktables
Cross-slide and rotary-base vise selections have different travel and rotation schedules. Fixed or movable worktable enquiries need separate axis, envelope, mounting and accuracy confirmation.
Enquire about this range ↗Woodworking and corner clamps
Portable, ordinary and quick-release woodworking vises accompany carpenter-vise and corner-miter clamp directions. Match jaw opening, throat access, protective surfaces and bench attachment.
Enquire about this range ↗Pipe workholding and wrenches
Hinged pipe vises, ductile-iron pipe clamps and separate pipe-wrench patterns cover different tasks. Nominal tool size is distinct from an actual pipe clamping range.
Enquire about this range ↗C-clamp and F-clamp assortments
Forged-steel and ductile-iron C-clamp directions include heavy, light, deep-throat and three-way forms. F-clamps add plastic or wooden handles with a ductile-iron body and steel slide-bar direction.
Enquire about this range ↗Anvils and supporting hand-tool directions
Cast-iron anvils have their own face and packing schedules. Bolt-cutter enquiries require current item and cutting-capacity confirmation for the intended material.
Enquire about this range ↗Automotive and suspension castings
Wheel hubs, brake drums, adjusting-arm and ADI suspension-hanger directions require part-specific drawings, material/heat-treatment evidence and intended vehicle or assembly information. No interchangeability is assumed.
Enquire about this range ↗Construction and electrical fittings
Construction-machinery casting and electrical fitting directions support drawing-led enquiries. Specify interface, material, finish and mechanical or electrical use requirements; application photos do not establish complete-machine supply or a rating.
Enquire about this range ↗Reference product directions
Start with a product.
Define the details.
Use these options to describe what you are buying. The public references identify your enquiry; the final model and specification are confirmed before an order.
REFERENCE 0358-01
Light-duty utility bench vises
Precision-cast body; powder-coated finish; Zinc-plated handle/main screw; Replaceable microgrooved jaws; 120° swivel base for swivel variants; HT200 grey iron or QT450-12 ductile iron body options.
- Dimensions and configurations
5 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pieces/case | GW/NW (kg) — verify swivel, pipe-jaw/anvil type Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pieces/case GW/NW (kg) 3 75 63.5 45 50×60 4 16/15 4 100 75 50 63×66 2 12/11 5 125 100 60 80×80 2 19.5/18.5 6 150 125 68 90×90 1 14.5/13.5 8 200 175 88 120×120 1 27/25.9 - Dimensions and configurations
5 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pieces/case | GW/NW (kg) — verify fixed, pipe-jaw/anvil type Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pieces/case GW/NW (kg) 3 75 63.5 45 50×60 4 14/13.2 4 100 75 50 63×66 2 11/9.8 5 125 100 60 80×80 2 17/16.2 6 150 125 68 90×90 1 13/12 8 200 175 88 120×120 1 24/23
REFERENCE 0358-02
Compact ductile-iron bench vises
QT450-12 ductile iron body; Powder-coated precision casting; Zinc-plated handle/main screw; Replaceable microgrooved jaws; 120° swivel base for swivel variants.
- Dimensions and configurations
5 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pieces/case | GW/NW (kg) — verify swivel with anvil Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pieces/case GW/NW (kg) 3 75 75 54 36×36 6 18.5/17.4 4 100 100 61 42×42 4 18/16.8 5 125 125 69 48×48 2 15/14 6 150 150 71 50.8×50.8 2 20/19.2 8 200 200 82 55×55 1 14/13 - Dimensions and configurations
5 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pieces/case | GW/NW (kg) — verify fixed with anvil Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pieces/case GW/NW (kg) 3 75 75 54 36×36 6 15/14.1 4 100 100 61 42×42 4 16.5/15.4 5 125 125 69 48×48 2 12/11 6 150 150 71 50.8×50.8 2 16.5/15.5 8 200 200 82 55×55 1 12.8/11.8
REFERENCE 0358-03
Push-button quick-release bench vises
Push-button jaw opening/closing; Replaceable jaws, permanent pipe jaws; Dual swivel lock lever; reinforced three-lug base; 360° swivel base; HT200 grey iron or QT450-12 ductile iron body options; Powder coat; zinc-plated handle/main screw; Listed hardened-jaw reference HRC45–56; test/batch confirmation required.
- Dimensions and configurations
3 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify quick-release swivel Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pieces/case GW/NW (kg) Carton (mm) 5 125 178 77 55×48 1 17.5/16.7 500×220×260 6 150 203 84 68×53 1 24/23 540×240×280 8 200 254 92 70×60 1 33.5/32.7 630×280×320
REFERENCE 0358-04
Heavy-duty swivel bench vises
120° swivel base; Replaceable jaws; Powder-coated cast body; zinc-plated handle/main screw; HT200 grey iron or QT450-12 ductile iron options.
- Dimensions and configurations
6 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pieces/case | GW/NW (kg) — verify swivel with pipe jaws/anvil Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pieces/case GW/NW (kg) 3 75 75 46 65×66 2 13/12 4 100 100 61 86×85 2 23.5/22.4 5 125 125 72 109×105 1 21/20 6 150 150 84 128×125 1 30.5/29.5 8 200 200 102 150×150 1 47/46 10 250 225 107 160×160 1 61/54 - Dimensions and configurations
5 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Pieces/case | GW/NW (kg) — verify swivel without pipe jaws/anvil Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Pieces/case GW/NW (kg) 3 75 75 46 2 12/11 4 100 100 61 2 21/20 5 125 125 72 1 20/19 6 150 150 84 1 28/27 8 200 200 102 1 45/44
REFERENCE 0358-05
Heavy-duty fixed bench vises
Fixed base; Replaceable jaws; Powder-coated cast body; zinc-plated handle/main screw; HT200 grey iron or QT450-12 ductile iron options.
- Dimensions and configurations
6 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pieces/case | GW/NW (kg) — verify fixed with pipe jaws/anvil Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pieces/case GW/NW (kg) 3 75 75 46 65×66 2 11/10 4 100 100 61 86×85 2 21/20 5 125 125 72 109×105 1 18/17 6 150 150 84 128×125 1 27/26 8 200 200 102 150×150 1 43/42 10 250 225 107 160×160 1 55/48 - Dimensions and configurations
5 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Pieces/case | GW/NW (kg) — verify fixed without pipe jaws/anvil Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Pieces/case GW/NW (kg) 3 75 75 46 2 10/9 4 100 100 61 2 19/18 5 125 125 72 1 17/16 6 150 150 84 1 24.5/23.5 8 200 200 102 1 38.5/37.5
REFERENCE 0358-06
Medium-duty swivel bench vises
120° swivel base; replaceable jaws; HT200 grey iron or QT450-12 ductile iron cast body; Powder coat; zinc-plated handle/main screw.
- Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify swivel with pipe jaws/anvil Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pieces/case GW/NW (kg) Carton (mm) 4 100 75 54 68×70 2 14/13.4 320×300×180 5 125 100 65 90×90 2 28/26 360×350×200 6 150 125 77 110×110 1 18/17 460×200×240 8 200 175 95 150×140 1 36/35 540×220×280 - Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify swivel without pipe jaws/anvil Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Pieces/case GW/NW (kg) Carton (mm) 4 100 75 52 2 13/12 320×300×180 5 125 100 65 2 25/24 360×350×200 6 150 125 72 1 17/16 460×200×240 8 200 175 95 1 31/30 540×220×280
REFERENCE 0358-07
Medium-duty fixed bench vises
Fixed base; replaceable jaws; HT200 grey iron or QT450-12 ductile iron cast body; Powder coat; zinc-plated handle/main screw.
- Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify fixed with pipe jaws/anvil Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pieces/case GW/NW (kg) Carton (mm) 4 100 75 54 68×70 2 14/13 320×300×160 5 125 100 65 90×90 2 26/24 360×350×180 6 150 125 77 110×110 1 17/16 460×200×220 8 200 175 95 150×140 1 33/32 540×220×250 - Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify fixed without pipe jaws/anvil Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Pieces/case GW/NW (kg) Carton (mm) 4 100 75 52 2 12/11 320×300×160 5 125 100 65 2 22/21 360×350×180 6 150 125 72 1 16/15 460×200×220 8 200 175 95 1 30/29 540×220×250
REFERENCE 0358-08
Machined precision bench vises
HT250 grey-iron precision-cast body; powder coat; Moving body machined on all sides; Chrome-plated handle/main screw; Replaceable jaws and built-in pipe jaws; 360° swivel base.
- Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pipe range (mm) | Pieces/case | GW/NW (kg) — verify light duty Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pipe range (mm) Pieces/case GW/NW (kg) 4 100 75 56 65×65 13.5–36 2 16/14 5 125 100 67 90×90 13.5–50 2 24/22 6 150 125 75 115×115 13.5–56 1 15/14 8 200 150 86 140×140 13.5–68 1 21/20 - Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pipe range (mm) | Pieces/case | GW/NW (kg) — verify heavy duty Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pipe range (mm) Pieces/case GW/NW (kg) 4 100 100 67 51×56 13.5–50 2 21/19 5 125 125 75 61×63 13.5–56 1 13.5/12.5 6 150 150 86 61×72 13.5–68 1 20/19 8 200 200 105 68×82 20–90 1 31/29.5
REFERENCE 0358-09
Rotating multi-purpose bench vises
HT250 grey iron body; powder coat; Zinc-plated handle/main screw; replaceable jaws; Moving body rotates360° and base swivels360°; Built-in pipe jaws; scale ruler and locking bar; Separate quick-release variant listed.
- Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pipe range (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify light duty Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pipe range (mm) Pieces/case GW/NW (kg) Carton (mm) 4 100 100 58.5 65×48 8–44 1 11.5/10.5 390×170×200 5 125 125 67 80×65 15–64 1 16/15 460×220×230 6 120 125 75 80×65 15–64 1 20/19 470×230×240 5 125 125 59 74×54 13–50 1 12.5/11.5 430×200×220 - Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | GW/NW (kg) | Carton (mm) — verify quick release
- 5 | 125 | 150 | 75 | 81×65 | 21/20 | 470×230×240
REFERENCE 0358-10
Reversible multi-function bench vise
HT250 grey iron casting; powder coat; Replaceable jaws; built-in pipe jaws; Chrome-plated handle/screw; steel beam; 360° swivel base.
- Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pipe range (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify reversible
- 5½ | 140 | 127 | 96 | 90×94 | 13.5–88.8 | 1 | 23/22 | 420×250×240
REFERENCE 0358-11
Heavy-duty American-style bench vises
HT250 grey iron; powder coat; Chrome-plated handle/screws; steel beam; Replaceable jaws and built-in pipe jaws; 360° swivel base.
- Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pipe range (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify heavy swivel Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pipe range (mm) Pieces/case GW/NW (kg) Carton (mm) 4 100 127 87.5 72×70 10–75.5 2 25/24 360×310×220 5 125 140 95 78×78 10–75.5 1 17/16 430×190×230 6 150 178 107 90×100 17–88.5 1 26/25 460×230×280 8 200 200 115 95×100 17–88.5 1 31/29.5 500×240×290
REFERENCE 0358-12
Light-duty American-style bench vises
HT250 grey iron; powder coat; Chrome-plated handle/screws; steel beam; Replaceable jaws and built-in pipe jaws; 210° swivel base.
- Dimensions and configurations
5 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pipe range (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify light swivel Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pipe range (mm) Pieces/case GW/NW (kg) Carton (mm) 4 114.3 100 66 67×64 13.5–60 2 18/16 350×350×210 5 139.7 125 81 70×67 13.5–63 1 13/12 360×180×200 6 165.1 150 97 76×73 13.5–88 1 18/17 420×210×240 6½ 158 133 109 84×89 13.5–74 1 28/27 430×280×280 8 203 190 113 105×92 13.5–100 1 37/36 530×280×290
REFERENCE 0358-13
Square-steel-beam bench vises
HT250 cast body; powder coat; Chrome-plated handle/screws; steel beam; Replaceable jaws; built-in pipe jaws; 360° swivel base.
- Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pipe range (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify square-beam swivel Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pipe range (mm) Pieces/case GW/NW (kg) Carton (mm) 4 102 108 87 76.2×74.5 13.5–60 1 18/17 370×220×225 5 127 133 95 82.6×82.6 13.5–75.5 1 24/23 404×255×245 6 152 152 105 85.7×101.6 13.5–75.5 1 30/29 455×280×275 8 203 216 114.5 101×114.3 13.5–75.5 1 39/38 530×280×290
REFERENCE 0358-14
Ductile-iron round-beam bench vises
QT450-12 ductile iron body; powder coat; Chrome-plated handle/screws; round beam; Replaceable jaws; built-in pipe jaws; 360° swivel base.
- Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pipe range (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify ductile-iron swivel Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pipe range (mm) Pieces/case GW/NW (kg) Carton (mm) 4½ 114.3 114.3 90 68×73 13.5–75 1 19/17.5 390×220×250 5½ 139.7 139.7 95 74×82 13.5–88 1 23/22 430×250×250 6½ 165.1 165.1 102 70×92 20–102 1 31/30 490×250×280 8 203.2 190.5 120.65 106×106 20–102 1 48/47 560×270×320
REFERENCE 0358-15
Compact cast bench vises with anvil
HT200 grey iron or QT450-12 ductile iron options; Powder-coated casting; zinc-plated handle/screw; Replaceable jaws;120° swivel on swivel variants.
- Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify swivel with anvil Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pieces/case GW/NW (kg) Carton (mm) 4 100 90 58 48×46 4 26/24 540×310×180 5 125 115 66 55×52 2 22/20.5 380×370×230 6 150 125 75 67×62 1 17/16 430×200×240 8 200 175 92.5 87×80 1 29/28 520×270×270 - Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify fixed with anvil Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pieces/case GW/NW (kg) Carton (mm) 4 100 90 58 48×46 4 22/21 510×310×180 5 125 115 66 55×52 2 19.5/18 370×350×210 6 150 125 75 67×62 1 14/13 430×200×210 8 200 175 92.5 87×80 1 26/25 520×220×250
REFERENCE 0358-16
Open-screw American-style bench vises
HT250 cast body; powder coat; Zinc-plated handle/main screw; steel beam; Replaceable jaws; built-in pipe jaws; Listed swivel-base options120–360°; exact variant to approve.
- Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pipe range (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify open-screw variants Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pipe range (mm) Pieces/case GW/NW (kg) Carton (mm) 3½ 90 75 50 40×45 15–36 6 26/24 460×360×170 4 100 75 59 46×53 15–47 2 13/11 280×270×180 4½ 114 75 59 46×53 15–47 2 13/12 280×280×190 4½ 114 75 67 50×43 15–47 2 10/8.6 280×280×190
REFERENCE 0358-17
Industrial ductile-iron and channel-steel-beam vises
Ductile iron body; Source tensile-strength reference60,000PSI; exact grade/batch test required; Separate round-body and channel-steel-beam directions.
- Dimensions and configurations
3 listed configurations · view dimensions
Nominal size (in) | Opening (mm) | Throat (mm) | Anvil (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify industrial round-body ductile iron Nominal size (in) Opening (mm) Throat (mm) Anvil (mm) Pieces/case GW/NW (kg) Carton (mm) 3.5 152.4 70 77×61 1 18/17 400×190×200 4 177.8 94 82×68 1 30/28.5 500×235×390 6 266.7 139.7 100×88 1 63/61.5 690×300×400 - Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Opening (mm) | Throat (mm) | Pipe range (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify channel-steel-beam ductile iron Nominal size (in) Opening (mm) Throat (mm) Pipe range (mm) Pieces/case GW/NW (kg) Carton (mm) 4 102 60 15–35 1 9/8.4 330×160×180 5 125 69 22–45 1 13/12 400×180×200 6 152 85 22–60 1 17/15.7 450×210×230 8 203 90 25–64 1 27/26 540×230×250
REFERENCE 0358-18
Fabricated and offset steel vises
Fabricated steel body direction; Separate offset-jaw/neck arrangement.
- Dimensions and configurations
5 listed configurations · view dimensions
Nominal size (in) | Opening (mm) | Throat (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify fabricated steel Nominal size (in) Opening (mm) Throat (mm) Pieces/case GW/NW (kg) Carton (mm) 4 127 63 2 15/13 380×300×200 5 152 78 2 24.5/22.5 450×370×220 6 178 78 1 23.5/22 520×220×230 8 230 104 1 40/38.5 650×250×270 6 152 78 2 25/23.5 450×370×220 - Nominal size (in) | Opening (mm) | Throat (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify offset steel
- 6 | 178 | 86 | 1 | 23/22 | 520×300×250
REFERENCE 0358-19
British-style cast bench vises
HT250 grey iron precision casting; Powder-coated finish; Separate standard and alternative-body versions.
- Dimensions and configurations
10 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify British-type variants Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Pieces/case GW/NW (kg) Carton (mm) 4 101.6 100 59 1 7.8/7.5 300×160×180 3 76.2 90 48 4 24/22 530×280×170 4 101.6 120 67 1 15/13.5 370×180×200 4.5 114.3 148 76.5 1 19.5/18.5 420×220×210 5 127 172 82.5 1 24/22.5 470×220×230 6 152.4 205 89 1 33/31.5 530×240×245 8 203.2 238 101.5 1 40/38 560×260×250 4 101.6 120 67 1 16/15 380×220×220 5 127 140 76.5 1 22.5/21.5 430×250×240 6 152.4 140 76.5 1 23/22 430×250×240
REFERENCE 0358-20
Quick-release and light-duty bench-vise alternatives
Quick-release whole bench vise; Separate fixed and swivel compact variants; British-type light-duty direction.
- Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | GW/NW (kg) | Carton (mm) — verify quick-release
- 5 | 125 | 203 | 68 | 85×75 | 9.5/8.7 | 420×170×200
- Dimensions and configurations
2 listed configurations · view dimensions
Nominal size (in) | Opening (mm) | Throat (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify compact fixed/swivel variants Nominal size (in) Opening (mm) Throat (mm) Pieces/case GW/NW (kg) Carton (mm) 4 75 50 4 17.5/15.5 500×270×160 4 75 50 4 18.5/17.5 500×270×160 - Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify British light-duty Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Pieces/case GW/NW (kg) Carton (mm) 4 100 114.3 62 1 8/7 350×290×200 5 125 139.7 70 1 — — 6 150 165 80 1 — — 8 200 216 100 1 — —
REFERENCE 0358-21
Compact bench-mount and clamp-on vises
Replaceable jaws; zinc-plated handle/main screw; Powder-coated casting;120° swivel on bench-mount layout; Individual tables declare HT200 cast iron; upper diagram also lists QT450-12 as material option—configuration to approve.
- Dimensions and configurations
2 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Anvil (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify bench-mount Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Anvil (mm) Pieces/case GW/NW (kg) Carton (mm) 2.5 63.5 54 47 70×30 2 9/7.5 310×250×160 4 100 63.5 51 78×36 2 14/12.6 330×280×180 - Dimensions and configurations
2 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify clamp-on Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Pieces/case GW/NW (kg) Carton (mm) 2.5 63.5 54 47 4 20.5/19.2 480×270×280 4 100 63.5 51 2 15/13.5 280×270×280
REFERENCE 0358-22
Clamp-on table vises
Multi-purpose, dovetail and guide-post arrangements shown as distinct complete vises.
- Nominal size (in) | Opening (mm) | Throat (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify multi-purpose table vise
- 2½ | 58 | 34 | 6 | 25/23 | 370×320×250
- Dimensions and configurations
2 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify dovetail Nominal size (in) Jaw width (mm) Pieces/case GW/NW (kg) Carton (mm) 2 50 10 23/22 450×360×220 2½ 60 10 24/23 450×360×220 - Dimensions and configurations
2 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify guide-post Nominal size (in) Jaw width (mm) Pieces/case GW/NW (kg) Carton (mm) 3 75 6 11.5/10 340×280×200 3 75 6 16.5/15 340×280×200
REFERENCE 0358-23
Machine, inclinable and precision machine vises
Standard, inclinable and precision machine workholding configurations.
- Dimensions and configurations
6 listed configurations · view dimensions
Jaw width (mm) | Jaw height (mm) | Maximum opening (mm) | Pieces/case — verify standard machine A Jaw width (mm) Jaw height (mm) Maximum opening (mm) Pieces/case 80 30 65 4 100 35 80 2 125 40 100 1 160 52 125 1 200 63 160 1 250 63 200 1 - Dimensions and configurations
5 listed configurations · view dimensions
Jaw width (mm) | Jaw height (mm) | Maximum opening (mm) | Pieces/case — verify standard machine B Jaw width (mm) Jaw height (mm) Maximum opening (mm) Pieces/case 136 36 170 1 160 51 180 1 200 64 220 1 250 64 280 1 320 81 360 1 - Dimensions and configurations
5 listed configurations · view dimensions
Jaw width (mm) | Jaw height (mm) | Maximum opening (mm) | Pieces/case — verify inclinable machine Jaw width (mm) Jaw height (mm) Maximum opening (mm) Pieces/case 100 41 80 1 125 46 100 1 125 46 140 1 160 50 125 1 200 53 160 1 - Dimensions and configurations
4 listed configurations · view dimensions
Jaw width (mm) | Jaw height (mm) | Maximum opening (mm) | Pieces/case — verify precision machine Jaw width (mm) Jaw height (mm) Maximum opening (mm) Pieces/case 100 32 100 1 160 45 160 1 200 50 190 1 250 70 250 1
REFERENCE 0358-24
Portable, ordinary and quick-release woodworking vises
Portable clamp-on woodworking vise; Separate ordinary and quick-release woodworking directions.
- Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify portable
- 6 | 156 | 115 | 51 | 6 | 19/17 | 510×420×210
- Dimensions and configurations
2 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify ordinary Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Pieces/case GW/NW (kg) Carton (mm) 6½ 165 115 60 6 18/16 510×420×230 7 178 200 76 4 25/23 420×370×300 - Dimensions and configurations
3 listed configurations · view dimensions
Nominal size (in) | Jaw width (mm) | Opening (mm) | Throat (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify quick release Nominal size (in) Jaw width (mm) Opening (mm) Throat (mm) Pieces/case GW/NW (kg) Carton (mm) 7 178 200 77 2 20/18 440×410×200 9 228.6 255 103 1 17/16 490×250×240 10½ 254 300 103 1 19/18 630×280×220
REFERENCE 0358-25
Hinged pipe vises, corner clamps and carpenter vises
Hinged pipe-vise, corner-miter clamp and carpenter-vise components are separate workholding directions.
- Dimensions and configurations
4 listed configurations · view dimensions
Nominal size (in) | Pipe range (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify hinged pipe vise Nominal size (in) Pipe range (mm) Pieces/case GW/NW (kg) Carton (mm) 2 0–50 4 15/13 370×210×260 2.5 3–60 4 19/17 430×250×290 3.5 3–90 2 16/14 280×250×360 6 10–165 1 18/16.5 420×250×470 - Dimensions and configurations
2 listed configurations · view dimensions
Nominal size (in) | Maximum opening (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify corner miter clamp Nominal size (in) Maximum opening (mm) Pieces/case GW/NW (kg) Carton (mm) 2¼ 56 20 21/19 550×250×290 4¼ 107 10 27/25 430×340×440 - Dimensions and configurations
3 listed configurations · view dimensions
Nominal size (in) | Pieces/case | GW/NW (kg) | Carton (mm) — verify carpenter vise Nominal size (in) Pieces/case GW/NW (kg) Carton (mm) 12 10 33/31 580×540×170 7 2 11/9 480×240×160 9.5 2 18/16 580×280×200
REFERENCE 0358-26
Drill-press vises, anvils and pipe clamps
Separate drill-press vise, cast-iron anvil and ductile-iron pipe-clamp directions.
- Dimensions and configurations
4 listed configurations · view dimensions
Jaw width (mm) | Jaw height (mm) | Maximum opening (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify drill-press vise Jaw width (mm) Jaw height (mm) Maximum opening (mm) Pieces/case GW/NW (kg) Carton (mm) 75 19 78 10 22/20 320×300×220 100 26 110 10 32/30 370×350×260 125 26 128 8 34/32 430×300×290 150 26 150 5 27/25 400×250×320 - Dimensions and configurations
7 listed configurations · view dimensions
Nominal size (lb) | Anvil (mm) | Pieces/case | GW/NW (kg) | Carton (mm) — verify cast iron anvil Nominal size (lb) Anvil (mm) Pieces/case GW/NW (kg) Carton (mm) 11 125×65 4 21/19 500×250×190 15 210×76 2 14/13.2 310×210×170 24 170×88 2 24/22 330×300×220 55 215×101 1 27/25 400×180×200 75 240×140 1 35/34 430×210×240 100 255×130 1 45/44 460×230×255 200 350×175 1 92/89 610×270×295 - Dimensions and configurations
2 listed configurations · view dimensions
Nominal size (in) | Pieces/case | GW/NW (kg) | Carton (mm) — verify ductile iron pipe clamp Nominal size (in) Pieces/case GW/NW (kg) Carton (mm) ¾ 12 15/14 440×260×250 ½ 12 11/10 340×240×230
REFERENCE 0358-27
American-pattern and aluminium-alloy pipe wrenches
Separate American heavy-duty pattern and aluminium-alloy body direction.
- Dimensions and configurations
8 listed configurations · view dimensions
Nominal size (in) | Pieces/case | GW/NW (kg) | Carton (mm) — verify American heavy-duty pattern Nominal size (in) Pieces/case GW/NW (kg) Carton (mm) 8 48 21/20 240×220×130 10 36 26/25 270×240×140 12 24 24/23 300×170×290 14 24 36/35 360×170×310 18 12 28/27 440×140×290 24 6 23/22 550×210×120 36 4 27/26 800×250×150 48 4 48/47 — - Dimensions and configurations
7 listed configurations · view dimensions
Nominal size (in) | Pieces/case | GW/NW (kg) | Carton (mm) — verify aluminium alloy Nominal size (in) Pieces/case GW/NW (kg) Carton (mm) 10 36 20/19 300×270×170 12 24 19/18 300×240×180 14 24 25/24 360×340×140 18 12 20/19 550×260×120 24 8 20/19 550×260×120 36 6 22/21 800×210×150 48 6 40/39 1045×370×160
REFERENCE 0358-28
Plastic- and wooden-handle F-clamps
Ductile iron clamp body; A3 mild-carbon-steel slide bar; Plastic and wooden handle alternatives.
- Dimensions and configurations
6 listed configurations · view dimensions
Nominal size (in) | Pieces/case | GW/NW (kg) | Carton (mm) — verify plastic handle Nominal size (in) Pieces/case GW/NW (kg) Carton (mm) 6 36 28/26 570×440×160 12 36 32/30 440×370×310 18 24 27/25 590×480×160 24 24 29/27 750×480×160 30 18 25/23 880×370×160 36 18 28/26 1050×370×160 - Dimensions and configurations
6 listed configurations · view dimensions
Nominal size (in) | Pieces/case | GW/NW (kg) | Carton (mm) — verify wooden handle Nominal size (in) Pieces/case GW/NW (kg) Carton (mm) 6 36 26/24 570×440×160 12 36 30/28 440×370×310 18 24 25/23 590×480×160 24 24 27/25 750×480×160 30 18 26/24 880×370×160 36 18 26/24 1050×370×160
REFERENCE 0358-29
Forged-steel and ductile-iron C-clamps
Ductile-iron and forged-steel C-clamp configurations.
- Dimensions and configurations
7 listed configurations · view dimensions
Nominal size (in) | Pieces/case | GW/NW (kg) — verify forged steel Nominal size (in) Pieces/case GW/NW (kg) 2 24 17/15 3 24 23/21 4 24 36/34 6 12 29/27 8 6 21/19 10 6 32/30 12 6 41/39 - Dimensions and configurations
9 listed configurations · view dimensions
Nominal size (in) | Pieces/case | GW/NW (kg) — verify ductile iron heavy duty Nominal size (in) Pieces/case GW/NW (kg) 2½ 40 23/21 3 40 29/27 4 24 26/24 5 20 25/23 6 16 29/27 8 12 27/25 10 8 27/25 12 8 32/30 14 6 28/26 - Dimensions and configurations
9 listed configurations · view dimensions
Nominal size (in) | Pieces/case | GW/NW (kg) — verify ductile iron light duty Nominal size (in) Pieces/case GW/NW (kg) 1 200 16/14 1½ 200 24/22 2 200 27/25 2½ 100 30/28 3 50 23/21 4 25 23/21 5 25 32/30 6 25 37/35 8 10 22/20 - Dimensions and configurations
3 listed configurations · view dimensions
Nominal size (in) | Pieces/case | GW/NW (kg) — verify ductile iron deep throat Nominal size (in) Pieces/case GW/NW (kg) 1 96 15/14 2 24 24/22 3 18 26/24 - Nominal size (in) | Pieces/case | GW/NW (kg) — verify ductile iron three-way
- 2½ | 24 | 10/9.1
REFERENCE 0358-30
Wheel hubs, brake drums and automotive cast components
Wheel-hub, brake-drum and automotive adjusting-arm cast-component enquiries can be assessed against a controlled part drawing.
- Selection inputs
- Drawing, material/grade, interface, dimensions, quantity and intended application; current technical file required
REFERENCE 0358-31
Construction-machinery cast components
Construction-machinery component and undercarriage-related casting directions shown.
- Selection inputs
- Drawing, material/grade, interface, dimensions, quantity and intended application; current technical file required
REFERENCE 0358-32
Cross-slide and rotary cross-slide vises
Separate cross-slide and360° rotary-base configurations.
- Dimensions and configurations
5 listed configurations · view dimensions
Jaw width (mm) | Jaw height (mm) | Maximum opening (mm) | Lengthwise travel (mm) | Crosswise travel (mm) | Pieces/case | GW/NW (kg) | Packing (mm) — verify cross slide Jaw width (mm) Jaw height (mm) Maximum opening (mm) Lengthwise travel (mm) Crosswise travel (mm) Pieces/case GW/NW (kg) Packing (mm) 80 30 65 70 65 1 6.5/6.5 240×240×140 102 35 90 80 80 1 10.5/9.5 270×270×160 125 41 115 95 95 1 14/13.2 290×290×170 152 42 135 100 100 1 17/16.2 320×320×180 203 47 165 130 130 1 26/25 390×390×190 - Dimensions and configurations
3 listed configurations · view dimensions
Jaw width (mm) | Pieces/case | GW/NW (kg) | Packing (mm) | Rotation (°) — verify rotary cross slide Jaw width (mm) Pieces/case GW/NW (kg) Packing (mm) Rotation (°) 102 1 12/11.5 270×270×180 360 125 1 16.5/16 290×290×190 360 150 1 20/19.5 320×320×200 360
REFERENCE 0358-33
Austempered ductile-iron suspension hangers
ADI drive-axle suspension hanger/bracket direction.
- Selection inputs
- Drawing, material/grade, interface, dimensions, quantity and intended application; current technical file required
REFERENCE 0358-34
Electric-power fitting components
Eye, fork, link, bracket and threaded fitting forms visible; exact interface by approved drawing.
- Selection inputs
- Drawing, material/grade, interface, dimensions, quantity and intended application; current technical file required
REFERENCE 0358-35
Austempered-ductile-iron industrial vises
Discuss ADI industrial workholding requirements against the current drawing, material and heat-treatment specification. Dimensions, force ratings and current configurations require confirmation.
- Quotation basis
- Current configuration and drawing approval
REFERENCE 0358-36
Heavy-vehicle fixture direction
Provide the fixture function, workpiece drawing, mounting and operating requirements. Current models, dimensions and validation records need confirmation.
- Quotation basis
- Current configuration and drawing approval
REFERENCE 0358-37
Bolt-cutter direction
Specify the intended workpiece, material and cutting size, handle arrangement and market. Capacity, cutter material and current item details need confirmation.
- Quotation basis
- Current configuration and drawing approval
REFERENCE 0358-38
Fixed and movable cross-worktable directions
Specify travel axes, workpiece, mounting, envelope and load requirements. Approve the actual worktable drawing and accuracy criteria separately from a cross-slide vise.
- Quotation basis
- Current configuration and drawing approval
Dimension and packing schedules describe separate catalogue configurations. Nominal inch or pound sizes are identification references; do not substitute them for jaw width, opening, capacity or measured mass. Listed GW/NW and pieces/case need the actual packing basis confirmed. Blank entries remain unspecified. Confirm current drawings, item availability, fit, material and inspection criteria before order.
What matters for this category
A better brief.
A clearer comparison.
Focus the sourcing conversation on the features, materials and production details that make a difference to your product range.
Compare the actual gripping geometry
Separate jaw width, opening, throat, pipe range, anvil and mounting requirements. For a machine or cross-slide selection, include jaw height, travel axes, rotation and the working envelope.
Select construction for the task
Compare the specified grey iron, ductile iron, fabricated or forged-steel and alloy directions. Confirm the actual grade, heat treatment, screw/jaw construction and finish for the selected item.
Coordinate drawings through packing
Use a common workpiece and mounting brief to compare quotations. Approve the sample, material and dimensional evidence, kit completeness, packaging and shipment measurements against the same configuration.
Branding, configuration & packaging
Make the product
fit your programme.
Bring artwork, reference samples and a target cost. The available process, minimum quantity, sample charges and development scope are reviewed for the chosen option.
Workholding and casting brief
Discuss jaw, base, mounting, screw, handle, anvil, pipe-grip and finish requirements where feasible. Casting and machined-component projects need a controlled drawing, material/heat-treatment specification and prototype approval.
OEM and presentation
Submit lawful colour, marking, label, manual, barcode and packing requirements. OEM feasibility, tooling, sample, artwork and packaging changes require approval for the actual item.
Samples and order terms
Request a reference, modified or drawing-based sample with the intended evaluation. Confirm sample charges, tooling, quantity by variant, minimums, production timing, spare jaws/components and shipment terms in the current quotation.
Quality & product evidence
Turn requirements
into checks.
Agree which product characteristics need testing and how the approved sample relates to the bulk order.
Dimensions and assembly
Agree jaw/opening/throat and mounting measurements, alignment, screw/handle operation, base locks, travel and rotation checks as applicable. Accuracy, backlash or load criteria must be specified for the selected arrangement.
Material and finishing
Request the relevant material/heat-treatment records and define inspection of cast or fabricated surfaces, jaws, screw, coating and machined interfaces. A source strength reference is not a current batch test or a universal load rating.
Function and shipment
Agree task-specific clamping or operational evaluation, fastener/accessory counts and sample acceptance. Measure actual carton dimensions and GW/NW, identify the packing quantity basis and approve protection for heavy parts.
Test capability is a starting point for the inspection plan. Request the method, applicable model and results needed for your order.
Documents matched to the order
Ask for evidence
that fits the product.
Send the workpiece or component drawing, intended job and destination so the appropriate configuration, material and shipment records can be requested.
State the sales market, intended users and required files in your first enquiry. Current validity and scope are checked for the selected supplier and product; a category description does not certify every item.
Share your document requirements ↗- Technical and interface records
- Request the current item sheet, dimension/mounting drawing, parts and jaw/screw bill, operating instructions and any agreed accuracy or functional inspection plan.
- Material and intended-use evidence
- Request material grade, heat-treatment and relevant test records for the actual part. Automotive, suspension, machinery and electrical components need their own intended-use, fit and approval evidence.
- Sample and packing file
- Record the approved sample/drawing revision, lawful artwork, inspection criteria, packing quantities, measured mass/carton dimensions and shipment list. Confirm any substitutions and spare-parts commitments.
Built around how you sell
Different buyers.
Different specifications.
Your sales channel changes the assortment, packaging and quality priorities. Tell us the intended use as well as the product name.
Workshop and industrial distribution
Build an itemised range of bench/table workholding, clamps, wrenches and anvils. Compare dimensional roles and complete mounting or accessory needs by product.
Machine and woodworking projects
Specify the machine table, workpiece and access requirements for machine, cross-slide, drill-press or woodworking selections. Agree accuracy, protection and operating criteria for the actual task.
Drawing-led component procurement
Coordinate automotive, suspension, engineering and electrical fitting enquiries by controlled part drawing, material, finish, interface and inspection requirement. Current suitability and service responsibility must be agreed.
From first brief to a defined order
One contact.
A practical next step.
Samples, commercial terms and responsibilities are agreed for the project. Use the same product and packing specification when comparing quotations.
Share the requirement
Product, reference image, quantity, sales market and timing.
Compare suitable options
Review configuration, materials, sample scope and relevant documents.
Approve the specification
Agree artwork, packaging, sample, testing and inspection criteria.
Confirm the order plan
Set price, payment, production, delivery and defect remedies in writing.
Buyer questions
Before you send
your first enquiry.
Practical answers about this sourcing direction, customization and the reference options. Your agreed specification and written quotation determine the actual order.
Which vise and clamp directions are covered?
Bench, table, quick-release, reversible, machine, drill-press, cross-slide, woodworking and pipe-workholding directions accompany C/F clamps, pipe wrenches and anvils. Selected cast-component and supporting tool enquiries can also be specified.
What dimensions should I specify for a vise?
State jaw width, opening, throat depth and mounting arrangement separately. Add jaw height, pipe range, anvil, travel axes or rotation where relevant. Nominal size alone is insufficient to identify the required configuration.
Can I select the body material and finish?
Discuss the listed cast-iron, ductile-iron, fabricated/forged-steel or alloy direction for the actual item. Confirm grade, heat treatment, jaw/screw construction, coating and feasibility against the quotation and sample.
Do the schedules establish clamping force or machining accuracy?
No universal force or accuracy is established. Provide the working process and acceptance criteria so the actual holding arrangement, dimensional inspection and relevant functional or material tests can be agreed.
Can automotive or electrical parts be supplied to a drawing?
These directions can be discussed using the part drawing, revision, material/heat treatment, interface, finish, use environment and document requirements. Vehicle fitment, service loads and electrical ratings need exact-part confirmation.
Is the stated mass per item or per carton?
Confirm the packing basis for the selected configuration. Catalogue GW/NW and pieces/case are reference schedules; request measured unit/carton masses, carton dimensions and shipment quantities in the current packing file.
Can you coordinate OEM, samples and packaging?
Yes. Submit the lawful marking/artwork, configuration, drawing, quantity and packaging brief. Feasibility, tooling, sample cost, minimums, lead time and inspection arrangements are agreed for the actual project.
What should I include in a quotation request?
Send the product direction and workpiece/task, dimension and mounting requirements, material/finish, destination, quantities by variant, sample/inspection needs and packing or artwork requirements. Include a controlled drawing where possible.
Who handles my enquiry?
Factory Sourcing Hub handles this enquiry as an independent sourcing and trading service. The product route, supplier suitability, sample scope and order responsibilities are agreed for the actual project.
How do I get a price and order minimum?
Send the product reference, quantities per variation, customization and packaging. Prices, minimums, sample charges and delivery dates are confirmed in a current quotation; the page is not a live inventory or price feed.
Can I discuss samples and inspection before ordering?
Yes. State whether you need a reference sample, a customized sample or development work. Agree the sample cost and shipping, approval specification, inspection plan and remedy for non-conforming goods before the bulk order.
What should I attach to my email?
Reference images, drawings, logo artwork and a product list are useful. Include quantities, the intended users and sales market, packaging, required documents and timing. After submitting the form, email attachments to kunhuow@gmail.com with your enquiry reference.
Tell us what you are planning
Your next order
starts with a brief.
A reference picture or a short description is enough to begin. Add the details you already know; the optional fields help make the follow-up more useful.
- Workholding or component family, workpiece/task, drawing revision and destination
- Dimension roles, mounting/travel, material/heat treatment, finish and any task-specific acceptance criteria
- Quantity by configuration, accessory or spare-parts bill, sample and document requirements
- Lawful marking/artwork, unit/outer protection, measured packing and requested shipment window
Download the enquiry checklist ↓
Independent sourcing and trading service. Supplier choice, service costs and order conditions are discussed for your project.
Discuss your requirements.
Product selection, customization, samples and quotation enquiries.
Explore other sourcing directions
More options for
your product list.
Compare separate product ranges and prepare a brief that fits your assortment.
Hand Tools, Wrenches, Pliers, Clamps & Tool Kit Sourcing
Source adjustable and torque wrenches, ratchets, sockets, locking pliers, clamps, pullers, cutters, screwdrivers and complete tool sets through one specification-led enquiry.
Explore this service ↗
Machining Tools, Precision Measurement, Workholding & Workshop Sourcing
Compare cutting-tool holders, workholding, mould components, precision measurement, rules and layout tools, inspection instruments, woodworking accessories, small-tool holding and workshop kits. Build an itemised enquiry around the actual drawing, range, construction and evidence requirements.
Explore this service ↗
Drilling, Grinding & Bench Tools Sourcing
Organise enquiries for drills, drivers, grinding tools, bench equipment, cutting and oscillating tools, batteries, garden-tool projects and pneumatic procurement with configuration, inspection and export coordination.
Explore this service ↗
Cable Ties, Mounts, Clamps, Tools & Terminals Sourcing
Source nylon and stainless cable ties, special bundling formats, hook-and-loop straps, mounts, clamps, installation tools and terminal directions with item-specific dimensions, materials and documentation.
Explore this service ↗Information basis: published product information reviewed . Reference details support a sourcing discussion. Current supply, samples and product-specific documents are confirmed for the selected item.