Home/General Merchandise/Generators, Water Pumps, Pressure Washers & Forklift Sourcing

Equipment sourcing

Power equipment & material handling

Generators, Water Pumps, Pressure Washers & Forklift Sourcing

Compare gasoline, diesel and inverter generators, engines, powered water pumps, pressure washers, forklifts and warehouse handling equipment with model-specific procurement support.

Generation, water movement, cleaning and material handling in one enquiry
Separate fuel, engine, output and load-capacity configurations
Technical comparisons, documentation requests and shipment planning

Discuss your sourcing brief ↗Explore product options →

Manufacturing, product documents and order conditions depend on the model and supply route selected for your project.

Category illustration of portable power and engine-driven equipment — Category illustration. Confirm the electrical nameplate, pump curve, load chart and selected configuration.

Start with a product reference, intended use and estimated quantity. We bring product selection, sample questions and quotation details into one conversation.

Email your reference image ↗

GenerationGasoline, diesel, inverter and generation/welding directions

Water and cleaningEngine-powered pumps, washers and battery wash guns

HandlingLithium, gasoline/LPG and diesel forklifts; pallet and stacking equipment

Quote basisSelected article, operating task, destination and inspection plan

Explore the product range

Build the range
your buyers need.

Choose a focused product or discuss a coordinated assortment. Each direction can be developed into a more specific model and packaging brief.

Gasoline generators

Small two-stroke and single-cylinder four-stroke sets, different open frames, tanks, panels, starting options and larger twin-cylinder configurations.

Enquire about this range ↗

Gasoline inverter generators

Compact enclosed, wheeled and open-frame directions, with voltage/frequency and housing variations kept separate.

Enquire about this range ↗

Diesel generation

Open economy and enclosed air-cooled sets, inverter diesel versions and transfer-system configurations requiring a complete electrical schedule.

Enquire about this range ↗

Generation and welding

Portable inverter generation/welding packages; welding current versions, duty cycle and simultaneous-use limits need confirmation.

Enquire about this range ↗

Independent engines

Small and larger single-cylinder gasoline units, a twin-cylinder gasoline engine and a vertical direct-injection diesel engine.

Enquire about this range ↗

Powered water pumps

Gasoline and diesel pump configurations with distinct connection, flow, head, suction and engine references.

Enquire about this range ↗

Engine-powered pressure washers

Gasoline axial-pump, gasoline plunger-pump and diesel plunger-pump directions; match pressure, flow and nozzle to the actual cleaning task.

Enquire about this range ↗

Electric and battery cleaning

Industrial electric-washer and lithium battery wash-gun enquiries, with separate supply and performance approval.

Enquire about this range ↗

Lithium forklifts

Three-support and four-wheel counterbalance constructions across separate load, battery and load-centre combinations.

Enquire about this range ↗

Internal-combustion forklifts

Gasoline/LPG and diesel counterbalance directions, plus rough-ground constructions and heavier loads requiring exact engine and mast approval.

Enquire about this range ↗

Warehouse trucks

Pedestrian and larger pallet transport, rider/walkie mast stackers, a rider stacker and a reach-truck construction.

Enquire about this range ↗

Spare parts and configuration support

Equipment-specific part identification, compatible drawings, labels, panels, packing and agreed evaluation or inspection requests.

Enquire about this range ↗

Reference product directions

Start with a product.
Define the details.

Use these options to describe what you are buying. The public references identify your enquiry; the final model and specification are confirmed before an order.

REFERENCE 0303-01

Compact two-stroke gasoline generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 650W
AC maximum power: 700W
AC voltage: 220V
AC current: 3.0A
Frequency: 50Hz
Engine construction: Single cylinder, 2-stroke
Nominal displacement: 63cc
Engine maximum output: 2.0HP
Fuel: Gasoline
Fuel tank: 4L
Starting options: Recoil
Listed dimensions: 380*325*325mm
Gross mass: 16KG

Discuss this option ↗

REFERENCE 0303-02

Alternative small gasoline generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 650W
AC maximum power: 750W
AC voltage: 220/110V
AC current: 3.8A
Frequency: 50/60 Hz
Engine construction: Single cylinder, 2-Stroke
Nominal displacement: 63cc
Engine maximum output: 2 HP
Fuel: Gasoline
Fuel tank: 4L
Protection degree: IP23
Ignition system: TCI
Cooling system: Air cooled
Starting options: Recoil start
Listed dimensions: 485×325×425mm
Gross mass: 18kg

Discuss this option ↗

REFERENCE 0303-03

Small recoil gasoline generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 1000W
AC maximum power: 1100W
AC voltage: 220V
AC current: 4.5A
Frequency: 50Hz
Engine construction: Single cylinder, 4-stroke
Nominal displacement: 98.5cc
Engine maximum output: 3.0HP
Fuel: Gasoline
Fuel tank: 5L
Starting options: Recoil
Listed dimensions: 460*360*360mm
Gross mass: 23KG

Discuss this option ↗

REFERENCE 0303-04

Single-cylinder portable gasoline generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 1100W
AC maximum power: 1200W
AC voltage: 220V
AC current: 5A
Frequency: 50Hz
Engine construction: Single cylinder, 4-stroke
Nominal displacement: 117.7cc
Engine maximum output: 3.5HP
Fuel: Gasoline
Fuel tank: 5L
Starting options: Recoil
Listed dimensions: 445*385*375mm
Gross mass: 24KG

Discuss this option ↗

REFERENCE 0303-05

Open-frame 2 kW gasoline generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2000W
AC maximum power: 2200W
AC voltage: 220V
AC current: 9.1A
Frequency: 50Hz
Engine construction: Single cylinder, 4-stroke, air-cooled
Nominal displacement: 163cc
Engine maximum output: 5.5HP
Fuel: Gasoline/Petrol
Fuel tank: 12L
Starting options: Recoil/electric
Listed dimensions: 605*445*490mm
Gross mass: 39KG

Discuss this option ↗

REFERENCE 0303-06

Configurable small gasoline range

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2000W/2500W/2800W
AC maximum power: 2200W/2700W/3000W
Frequency: 50Hz
AC voltage: 220V/380V
AC current: 9.1A/11.4A/12.7A(2.8A/3.6A/4.3A)
Power factor: 1.0
Engine construction: Single Cylinder, Four Stroke
Engine maximum output: 5.5HP/6.5HP/7.0HP
Nominal displacement: 163cc/196cc/212CC
Fuel: Unleaded Gasoline
Fuel tank: 15L
Starting options: Manual Start/Electric Start
Listed dimensions: 605*430*440 mm
Net mass: 38KG

Discuss this option ↗

REFERENCE 0303-07

Alternative-panel gasoline range

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2000W/2500W/2800W
AC maximum power: 2200W/2700W/3000W
Frequency: 50Hz
AC voltage: 220V/380V
AC current: 9.1A/11.4A/12.7A(2.8A/3.6A/4.3A)
Power factor: 1.0
Engine construction: Single Cylinder, Four Stroke
Engine maximum output: 5.5HP/6.5HP/7.0HP
Nominal displacement: 163cc/196cc/212CC
Fuel: Unleaded Gasoline
Fuel tank: 15L
Starting options: Manual Start/Electric Start
Listed dimensions: 605*430*440 mm
Net mass: 45KG

Discuss this option ↗

REFERENCE 0303-08

Single-cylinder recoil gasoline range

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2000W/2500W/2800W
AC maximum power: 2200W/2700W/3000W
AC voltage: 220V
AC current: 9.1A/11.4A/12.7A
Frequency: 50Hz
Engine construction: Single cylinder, 4-stroke
Nominal displacement: 163cc/196cc/212cc
Engine maximum output: 5.5HP/6.5HP/7.0HP
Engine / Fuel: Gasoline
Fuel tank: 15L
Starting options: Recoil/Electric
Listed dimensions: 605mm*430mm*435mm
Gross mass: 36KG/38KG/39KG

Discuss this option ↗

REFERENCE 0303-09

Compact dual-start gasoline version

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2500W
AC maximum power: 2800W
Frequency: 50/60Hz
AC voltage: 110V/220V
AC current: 11.4A
Engine construction: Single Cylinder, Four Stroke
Engine maximum output: 7.0HP
Nominal displacement: 212CC
Fuel: Unleaded Gasoline
Fuel tank: 15L
Starting options: Manual Start/Electric Start
Listed dimensions: 615*455*490 mm
Net mass: 42KG

Discuss this option ↗

REFERENCE 0303-10

Alternative 2.5 kW gasoline version

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2500W
AC maximum power: 2700W
Frequency: 50/60HZ
AC voltage: 110V/220V
AC current: 11.4A
Power factor: 1.0
Engine construction: Four-stroke; cylinder arrangement to confirm
Engine maximum output: 6.5HP
Nominal displacement: 196cc
Fuel: Gasoline
Fuel tank: 15L
Starting options: Recoil Start/Electric Start
Listed dimensions: 605*430*430mm
Net mass: 38KG

Discuss this option ↗

REFERENCE 0303-11

Tubular-frame gasoline transport version

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2800W
AC maximum power: 3000W
Frequency: 50/60Hz
AC voltage: 110V/220V/380V
AC current: 12.7A/4.3A
Engine construction: Single Cylinder, Four Stroke
Engine maximum output: 7.0HP
Nominal displacement: 212CC
Fuel: Unleaded Gasoline
Fuel tank: 15L
Starting options: Manual Start/Electric Start
Listed dimensions: 615*445*490 mm
Net mass: 39KG

Discuss this option ↗

REFERENCE 0303-12

Recoil/electric 2.8 kW gasoline version

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2800W
AC maximum power: 3000W
AC voltage: 220V
AC current: 12.7A
Frequency: 50Hz
Engine construction: Single cylinder, 4-stroke
Nominal displacement: 212cc
Engine maximum output: 7.0HP
Fuel: Gasoline
Fuel tank: 15L
Starting options: Recoil/Electric
Listed dimensions: 610*485*475mm
Gross mass: 37.5KG

Discuss this option ↗

REFERENCE 0303-13

Wheeled gasoline generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2800W
AC maximum power: 3000W
AC voltage: 220V/380V
AC current: 12.7A/4.3A
Frequency: 50Hz
Engine construction: Single cylinder, 4-stroke
Nominal displacement: 212cc
Engine maximum output: 7.0HP
Fuel: Gasoline
Fuel tank: 15L
Starting options: Recoil/Electric
Listed dimensions: 605*445*490mm
Gross mass: 39KG

Discuss this option ↗

REFERENCE 0303-14

Portable 3 kW gasoline range

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 3000W
AC maximum power: 3300W
AC voltage: 220V/380V
AC current: 13.6A/4.6A
Frequency: 50Hz
Engine construction: Single cylinder, 4-stroke
Nominal displacement: 223cc
Engine maximum output: 7.5HP
Fuel: Gasoline
Fuel tank: 15L
Starting options: Recoil/Electric
Listed dimensions: 620*450*445mm
Gross mass: 40KG

Discuss this option ↗

REFERENCE 0303-15

Alternative-frame 3 kW gasoline version

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 3000W
AC maximum power: 3300W
AC voltage: 220V/380V
AC current: 13.6A/4.6A
Frequency: 50Hz
Engine construction: Single cylinder, 4-stroke
Nominal displacement: 223cc
Engine maximum output: 7.5HP
Fuel: Gasoline
Fuel tank: 15L
Starting options: Recoil/Electric
Listed dimensions: 620*450*445mm
Gross mass: 40KG

Discuss this option ↗

REFERENCE 0303-16

Larger open-frame gasoline generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 4000W
AC maximum power: 4500W
AC voltage: 220V
AC current: 18.0A
Frequency: 50Hz
Engine construction: Single Cylinder, 4-Stroke
Nominal displacement: 389cc
Engine maximum output: 13.0HP
Fuel: Gasoline
Fuel tank: 25L
Starting options: Recoil/Electric
Listed dimensions: 680*520*540mm
Gross mass: 78KG

Discuss this option ↗

REFERENCE 0303-17

6 kW gasoline generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 6000W
AC maximum power: 6500W
AC voltage: 220V
AC current: 27.0A
Frequency: 50Hz
Engine construction: Single Cylinder, 4-Stroke
Nominal displacement: 420cc
Engine maximum output: 15.0HP
Fuel: Gasoline
Fuel tank: 25L
Starting options: Recoil/Electric
Listed dimensions: 680*520*540mm
Gross mass: 82KG

Discuss this option ↗

REFERENCE 0303-18

7 kW gasoline configurations

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 7000W
AC maximum power: 7500W
AC voltage: 220V
AC current: 31.8A
Frequency: 50Hz
Engine construction: Single Cylinder, 4-Stroke
Nominal displacement: 455cc
Engine maximum output: 17.0HP
Fuel: Gasoline
Fuel tank: 25L
Starting options: Recoil/Electric
Listed dimensions: 680*520*540mm
Gross mass: 84KG

Discuss this option ↗

REFERENCE 0303-19

9 kW gasoline generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: Generator set
Frequency: 50Hz
AC voltage: 230V
AC rated power: 9000W
AC maximum power: 10000W
Power factor: 1.0
DC output: 12V/8A
Fuel tank: 25L
Overload protection: 38A
Altitude: ≤1000m
Engine construction: Single cylinder, 4-stroke, forced air cooling, overhead valve
Nominal displacement: 500cc
Fuel: unleaded gasoline
Ignition system: Electromagnetic ignition
Lubricating system: Forced splashing
Speed control system: Centrifugal speed regulation
Direction of crankshaft rotation: Anticlockwise
Bore/stroke: 94x72mm
Oil quantity: 1.2L
Starting options: Manual Start&Electric Start&One Button Start&ATS
Listed dimensions: 695*525*545mm
Net mass: 90.5KG

Discuss this option ↗

REFERENCE 0303-20

Additional portable gasoline frame

Compare this separately listed frame against the current confirmed electrical schedule; do not infer peak output from the product heading.

Frequency: 50Hz
Engine construction: Single cylinder, 4-stroke
Nominal displacement: 223cc
Engine maximum output: 7.5HP
Fuel: Gasoline
Fuel tank: 15L
Starting options: Recoil/Electric
Listed dimensions: 620*450*445mm
Gross mass: 40KG

Discuss this option ↗

REFERENCE 0303-21

Compact 1 kW inverter generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Enclosure reference: IP23M
AC continuous power (S1): 1000W
AC maximum power (S2 5s): 1020W
AC voltage: 230V ~ (alternating current)
Frequency: 50Hz
Engine construction: 4-stroke air-cooled
Fuel: petrol
Weight: approx 13kg
Power factor: 1

Discuss this option ↗

REFERENCE 0303-22

Alternative-voltage compact inverter

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generator: Inverter
AC continuous power: 1000W
AC maximum power: 1020W
Frequency: 50Hz
AC voltage: 220V
Engine construction: 1 cylinder, 4 stroke
Normal Current Rating: 4.3A
Motor Power: max.1.5kw(2.04HP)
Nominal displacement: approx.53.5cm³
Consumption reference, stated duty: approx.0.68L/hr(with2/3 load)
Fuel: regular and premium petrol
Starting options: Recoil
Fuel tank: approx.4.5L
Runtime reference, stated load: 4.5Hours@75%load

Discuss this option ↗

REFERENCE 0303-23

Compact 2 kW inverter generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Enclosure reference: IP23M
AC continuous power (S1): 2000W
AC maximum power (S2 5minute): 2050W
AC voltage: 230V
AC current: 8.7A
Frequency: 50HZ
Engine construction: 4-stroke, air-cooled
Nominal displacement: 79.8cm³
Engine maximum output: 2.4kW/3.27HP
Fuel: Petrol
Fuel tank: 4L
Engine oil: 15W-40
Consumption reference, at⅔ load: 1L/H
Listed dimensions: 460*305*440mm
Weight: 21.5kg
Power factor: 1

Discuss this option ↗

REFERENCE 0303-24

Wheeled compact inverter generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generator: Inverter
AC continuous power: 2000W
AC maximum power: 2050W
Frequency: 50Hz
AC voltage: 220V
Engine construction: 1 cylinder, 4 stroke
Nominal displacement: 79.8cc
Starting options: Recoil
Fuel tank: 4L
Runtime reference, stated load: 4.5Hours@75%load

Discuss this option ↗

REFERENCE 0303-25

2 kW inverter with larger output margin

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: Inverter Generator
Frequency: 50Hz
AC voltage: 230V
AC rated power: 2000W
AC maximum power: 2200W
Power factor: 1.0
Waveform reference (%): ≤3%
Overload-control reference: Frequency converter overcurrentprotection program control
Altitude reference: ≤1000m
Engine construction: Single cylinder, four stroke, Forced air cooling, Overhead valve
Nominal displacement: 118.7cc
Fuel: Unleaded gasoline
Fuel tank: 3.6L
Oil quantity: 0.6L
Starting options: Manual start/Electric start
Net mass: 19.5kg

Discuss this option ↗

REFERENCE 0303-26

2.5 kW inverter generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: Inverter Generator
Frequency: 50Hz
AC voltage: 230V
AC rated power: 2500W
AC maximum power: 2800W
Power factor: 1.0
Waveform reference (%): ≤3%
Overload-control reference: Frequency converter overcurrent protection program control
Altitude reference: ≤1000m
Engine construction: Single cylinder, Four stroke, Forced air cooling, Overhead valve
Nominal displacement: 196CC
Fuel: Unleaded gasoline
Fuel tank: 5.5L
Runtime reference, rated load: 3h
Oil quantity: 0.6L
Starting options: Manual start/Electric start
Listed dimensions: 470*390*470mm
Net mass: 24.3kg

Discuss this option ↗

REFERENCE 0303-27

Compact enclosed 3 kW inverter

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: Inverter Genertor
Frequency: 50Hz/60Hz
AC voltage: 230V/110V
AC rated power: 3000W
AC maximum power: 3200W
Power factor: 1.0
Waveform reference (%): ≤3%
Overload-control reference: Frequency converter overcurrent protection program control
Altitude reference: ≤1000m
Engine construction: Single cylinder, Four stroke, Forced air cooling, Overhead valve
Nominal displacement: 149cc
Fuel: Unleaded Gasoline
Fuel tank: 5L
Oil quantity: 0.6L
Starting options: Manual start
Listed dimensions: 520*325*495mm
Net mass: 20.5KG

Discuss this option ↗

REFERENCE 0303-28

Open-layout 3 kW inverter

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: Inverter Generator
Frequency: 50Hz
AC voltage: 230V
AC rated power: 3000W
AC maximum power: 3200W
Power factor: 1.0
Waveform reference (%): ≤3%
Overload-control reference: Frequancy converter overcurrent protection program control
Altitude reference: ≤1000m
Engine construction: Single cylinder, Four stroke, Forced air cooling, Overhead valve
Nominal displacement: 212cc
Fuel: Unleaded Gasoline
Fuel tank: 8L
Oil quantity: 0.6L
Starting options: Manual Start/Electric Start
Listed dimensions: 465*380*450mm
Net mass: 22kg

Discuss this option ↗

REFERENCE 0303-29

Alternative housing 3 kW inverter

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: Inverter Generator
Frequency: 50Hz/60Hz
AC voltage: 230V/110V
AC rated power: 3000W
AC maximum power: 3200W
Power factor: 1.0
Waveform reference (%): ≤3%
Overload-control reference: Frequancy converter overcurrent protection program control
Altitude reference: ≤1000m
Engine construction: Single cylinder, Four stroke, Forced air cooling, Overhead valve
Nominal displacement: 223cc
Fuel: Unleaded Gasoline
Fuel tank: 8L
Oil quantity: 0.6L
Starting options: Manual Start/Electric Start
Listed dimensions: 510*435*515mm
Net mass: 27kg

Discuss this option ↗

REFERENCE 0303-30

3.5 kW inverter generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: Inverter Generator
Frequency: 50Hz
AC voltage: 230V
AC rated power: 3500W
AC maximum power: 3800W
Power factor: 1.0
Waveform reference (%): ≤3%
Overload-control reference: Frequency converter overcurrent protection program control
Altitude reference: ≤1000m
Engine construction: Single cylinder, Four stroke, Forced air cooling, Overhead valve
Nominal displacement: 212CC
Fuel: Unleaded gasoline
Fuel tank: 9L
Runtime reference, rated load: 4h
Starting options: Manual start/Electric start
Listed dimensions: 490*430*470mm
Net mass: 25.5kg

Discuss this option ↗

REFERENCE 0303-31

Additional portable inverter construction

This listed construction has conflicting output information. Compare the housing, starting method and current approved rating before selection.

Generation layout: Inverter
Enclosure reference: IP23M
Frequency: 50HZ
Engine construction: 1 cylinder, 4-stroke, air-cooled
Bore/stroke: 70*55mm
Nominal displacement: 212cc
Rated engine (hp/rpm): 6.5/3600 hp/rpm
Maximum engine (hp/rpm): 7.5/3600 hp/rpm
Fuel: Petrol
Engine oil: 15W-40
Oil quantity: 0.6L
Waveform reference (%): ≤2.5%
Fuel tank: 9L
Runtime reference, stated load: 4.5hours@75%load
Starting options: Recoil Start/Electric Start
Net mass: 31kg
Packing dimensions: 580*440*445mm
Quantity20’/40’/40’H: 250/510/600pcs

Discuss this option ↗

REFERENCE 0303-32

4 kW inverter generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: Inverter Generator
Frequency: 50Hz/60Hz
AC voltage: 230V/110V
AC rated power: 4000 W
AC maximum power: 4200 W
Power factor: 1.0
Waveform reference (%): ≦3%
Overload-control reference: Frequency converter overcurrent protection program control
Altitude reference: ≦1000m
Engine construction: Single cylinder, 4-stroke, Forced air cooling
Nominal displacement: 240cc
Fuel: Unleaded Gasoline
Fuel tank: 8 L
Oil quantity: 0.6 L
Starting options: Manual start/Electric start
Listed dimensions: 445*430*510 mm
Net mass: 26.5kg

Discuss this option ↗

REFERENCE 0303-33

Open-frame multi-output inverter family

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: Inverter Generator
Frequency: 50Hz/60Hz
AC voltage: 230V
AC rated power: 3000/3500/4000/4800 W
AC maximum power: 3200/3800/4200/5000 W
Power factor: 1.0
Waveform reference (%): ≦3%
Overload-control reference: Frequency converter overcurrent protection program control
Altitude reference: ≦1000m
Engine construction: Single cylinder, 4-stroke, Forced air cooling
Nominal displacement: 223cc/240cc
Fuel: Unleaded Gasoline
Fuel tank: 8 L
Oil quantity: 0.6 L
Starting options: Manual start
Listed dimensions: 475*390*500 mm
Net mass: 24.5kg

Discuss this option ↗

REFERENCE 0303-34

5 kW open-frame inverter

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: Inverter Generator
Frequency: 50Hz
AC voltage: 230V
AC rated power: 5000W
AC maximum power: 5500W
Power factor: 1.0
Waveform reference (%): ≤3%
Overload-control reference: Frequency converter overcurrent protection program control
Altitude reference: ≤1000m
Engine construction: Single cylinder, Four stroke, Forced air cooling, Overhead valve
Nominal displacement: 291.5CC
Fuel: Unleaded gasoline
Fuel tank: 13L
Runtime reference, rated load: 5h
Oil quantity: 0.75L
Starting options: Manual start/Electric start
Listed dimensions: 635*550*560mm
Net mass: 32kg

Discuss this option ↗

REFERENCE 0303-35

Compact higher-output inverter range

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: Inverter Generator
Frequency: 50Hz/60Hz
AC voltage: 110V/230V/380V
AC rated power: 5000/6000 W
AC maximum power: 5500/6500 W
Power factor: 1.0
Waveform reference (%): ≦3%
Overload-control reference: Frequency converter overcurrent protection program control
Altitude reference: ≦1000m
Engine construction: Single cylinder, 4-stroke, Forced air cooling
Nominal displacement: 240cc
Fuel: Unleaded Gasoline
Fuel tank: 5 L
Oil quantity: 0.6 L
Starting options: Manual start/Electric start
Listed dimensions: 560*420*450 mm
Net mass: 42kg

Discuss this option ↗

REFERENCE 0303-36

Alternative compact inverter housing

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: Inverter Genertor
Frequency: 50Hz
AC voltage: 230V
AC rated power: 5000W/6000W
AC maximum power: 5500W/6500W
Power factor: 1.0
Waveform reference (%): ≤3%
Overload-control reference: Frequency converter overcurrent protection program control
Altitude reference: ≤1000m
Engine construction: Single cylinder, Four stroke, Forced air cooling, Overhead valve
Nominal displacement: 240cc
Fuel: Unleaded Gasoline
Fuel tank: 5L
Oil quantity: 0.6L
Starting options: Manual start/Electric start
Listed dimensions: 560*420*450mm
Net mass: 30KG

Discuss this option ↗

REFERENCE 0303-37

9 kW enclosed inverter

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: Inverter Generator
Frequency: 50Hz/60Hz
AC voltage: 230V/110V/380V
AC rated power: 9000W
AC maximum power: 9500W
Power factor: 1.0
Waveform reference (%): ≤3%
Overload-control reference: Frequency converter overcurrent protection program control
Altitude reference: ≤1000m
Engine construction: Single cylinder, 4-stroke, Forced air cooling
Nominal displacement: 500cc
Fuel: Unleaded gasoline
Fuel tank: 33L
Oil quantity: 1.1L
Starting options: Electric start
Listed dimensions: 848*645*710mm
Net mass: 105kg

Discuss this option ↗

REFERENCE 0303-38

High-output inverter frame family

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 7000W/9000W/11000W
AC maximum power: 7500W/9500W/12000W
AC voltage: 230V/110V/380V(can customize)
Power factor: 1.0
Waveform reference (%): ≦3%
Overload-control reference: Frequency converter overcurrent protection program control
Altitude reference: ≦1000m
Frequency: 50Hz/60Hz
Engine construction: Single cylinder, 4-stroke, Forced air cooling
Nominal displacement: 420cc/460cc/500cc
Fuel: Unleaded Gasoline
Fuel tank: 25L
Oil quantity: 1.1L
Starting options: Manual start/Electric start
Listed dimensions: 605*525*625mm
Gross mass: 60KG/65KG/75KG

Discuss this option ↗

REFERENCE 0303-39

Alternative 7–9 kW inverter frame family

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: Inverter Generator
Frequency: 50Hz/60Hz
AC voltage: 230V/110v/380V
AC rated power: 7000W/8000W/9000W
AC maximum power: 7500W/8500W/9500W
Power factor: 1.0
Waveform reference (%): ≦3%
Overload-control reference: Frequency converter overcurrent protection program control
Altitude reference: ≦1000m
Engine construction: Single cylinder, 4-stroke, Forced air cooling
Nominal displacement: 420cc/460cc/500cc
Fuel: Unleaded Gasoline
Fuel tank: 25L
Oil quantity: 1.1L
Starting options: Manual start/Electric start
Listed dimensions: 605*525*625 mm
Net mass: 65-70kg

Discuss this option ↗

REFERENCE 0303-40

9–11 kW inverter configurations

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Configurations: A; B; C
Generation layout: Inverter Generator
Frequency: 50Hz/60Hz
AC voltage: 230V/110V/380V
AC rated power: 9000W; 10000W; 11000W
AC maximum power: 9500W; 11000W; 12000W
Power factor: 1.0
Waveform reference (%): ≤3%
Overload-control reference: Frequency converter overcurrent protection program control
Altitude reference: ≤1000m
Engine construction: Single cylinder, 4-stroke, Forced air cooling
Nominal displacement: 460cc; 500cc; 550cc
Fuel: Unleaded gasoline
Fuel tank: 34L
Oil quantity: 0.459L
Starting options: Electric start
Listed dimensions: 710*520*615mm
Net mass: 65-75kg

Discuss this option ↗

REFERENCE 0303-41

Large single-cylinder inverter version

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: Inverter Generator
Frequency: 50Hz
AC voltage: 230V
AC rated power: 10000W
AC maximum power: 11000W
Power factor: 1.0
Waveform reference (%): ≤3%
Overload-control reference: Fluid magnetic circuit breaker
Altitude reference: ≤1000m
Engine construction: Single cylinder, Four stroke, Forced air cooling
Nominal displacement: 550CC
Fuel: Unleaded gasoline
Fuel tank: 36L
Runtime reference, rated load: 6h
Oil quantity: 1.3L
Starting options: Manual start/Electric start
Listed dimensions: 730*677*690mm
Net mass: 80kg

Discuss this option ↗

REFERENCE 0303-42

Inverter generator and welding package

Compare the separate generation and welding modes, rated current version, electrode range and duty-cycle data. Simultaneous full outputs are not implied.

Generation layout: Inverter Generator
Frequency: 50Hz/60Hz
AC voltage: 230V/110V
AC rated power: 3000 W
AC maximum power: 3200 W
Power factor: 1.0
Waveform reference (%): ≦3%
Overload-control reference: Frequency converter overcurrent protection program control
Altitude reference: ≦1000m
Engine construction: Single cylinder, 4-stroke, Forced air cooling
Nominal displacement: 212cc
Fuel: Unleaded Gasoline
Fuel tank: 8 L
Oil quantity: 0.6 L
Welding rated current: 130A/160A
Welding maximum current: 160A/190A
Starting options: Manual start
Listed dimensions: 475*390*500 mm
Net mass: 25kg

Discuss this option ↗

REFERENCE 0303-43

Compact generation/welding construction

Compare the alternative housing and starting arrangement with the required welding process.

Generation layout: Inverter Generator
Frequency: 50Hz
AC voltage: 230V
AC rated power: 3000W
AC maximum power: 3200W
Power factor: 1.0
Waveform reference (%): ≤3%
Overload-control reference: Frequancy converter overcurrent protection program control
Altitude reference: ≤1000m
Engine construction: Single cylinder, Four stroke, Forced air cooling, Overhead valve
Nominal displacement: 212cc
Fuel: Unleaded Gasoline
Fuel tank: 8L
Oil quantity: 0.6L
Welding rated current: 130A/160A
Welding maximum current: 160A/190A
Starting options: Manual Start/Electric Start
Listed dimensions: 465*380*450mm
Net mass: 22kg

Discuss this option ↗

REFERENCE 0303-44

Small air-cooled diesel generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2800W
AC maximum power: 3000W
AC voltage: 230V/380V
AC current: 12.2A/13.8A
Speed: 3000rpm
Frequency: 50Hz/60Hz
Frame style: Open Frame
Weight: 95KGS
Cooling System Type: Air cooling System
Engine construction: Direct injection Vertical, 4-cycle, air-cooled diesel engine
Nominal displacement: 296cc
Governor System: Centrifugal weight system
Fuel: Diesel light fuel(BS-AL or equivalent)
Fuel tank: 15L

Discuss this option ↗

REFERENCE 0303-45

Enclosed diesel generator configurations

Frequency-specific outputs are different builds; do not pair an output with an unrelated voltage column.

Configurations: A; B
Generation layout: Revolving field type 2 pole generator
Frequency: 50 Hz; 60 Hz
AC continuous power: 4.2KW; 5KW
AC voltage: 230V; 240 (120) V
AC current: 18.3A; 20.8 (41.7) A
Generator / Engine speed (r/min): 3000r/min; 3600r/min
Generator / Phase: Single phase
Power factor: 1
Generator / Excitation system: Controlled constant self-excitation
Generator / D.C output V/A: 12V/8.3A
Generator / Coupling pattern: Straight shaft coupling
Engine / Type: Direct injection vertical, 4-cycle, air-cooled diesel engine
Nominal displacement (cc/cu.in): 406 (24.78)
Starting options: Electric start
Engine / Governor system: Centrifugal weight system
Engine / Fuel: Diesel light fuel (BS-AL or equivalent)
Fuel tank: 16L
Oil quantity: 1.65L
Engine / Protection system: Low-oil warning/shutdown, version-specific; confirm selected unit
Listed dimensions: 950×580×740mm
Dry mass: 165kg

Discuss this option ↗

REFERENCE 0303-46

Economy open diesel generator

Compare the smaller tank and open-frame arrangement with the exact load and route.

Configurations: A; B
Generation layout: Revolving field type 2 pole generator
Frequency: 50 Hz; 60 Hz
AC continuous power: 4.2KW; 5KW
AC voltage: 230V; 240 (120) V
AC current: 18.3A; 20.8 (41.7) A
Generator / Engine speed (r/min): 3000r/min; 3600r/min
Generator / Phase: Single phase
Power factor: 1
Generator / Excitation system: Controlled constant self-excitation
Generator / D.C output V/A: 12V/8.3A
Generator / Coupling pattern: Straight shaft coupling
Engine / Type: Direct injection vertical, 4-cycle, air-cooled diesel engine
Nominal displacement (cc/cu.in): 406(24.78)
Starting options: Recoil start/ Electric start
Engine / Governor system: Centrifugal weight system
Engine / Fuel: Diesel light fuel (BS-AL or equivalent)
Fuel tank: 5.5L
Oil quantity: 1.65L
Bore/stroke (unit unstated): 86×70
Engine / Protection system: Low-oil warning/shutdown, version-specific; confirm selected unit
Listed dimensions: 745×480×615mm
Dry mass: 95kg

Discuss this option ↗

REFERENCE 0303-47

Alternative open diesel generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 4200W
AC maximum power: 5000W
AC voltage: 230V/380V
AC current: 18.3A/20.8A
Speed: 3000rpm
Frequency: 50Hz/60Hz
Frame style: Open Frame
Weight: 100KGS
Cooling System Type: Air cooling System
Engine construction: Direct injection Vertical, 4-cycle, air-cooled diesel engine
Nominal displacement: 406cc
Governor System: Centrifugal weight system
Fuel: Diesel light fuel(BS-AL or equivalent)
Fuel tank: 15L

Discuss this option ↗

REFERENCE 0303-48

8 kW diesel generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 8.0kW
AC maximum power: 8.5kW
AC voltage: 230V
AC current: 34.8A
Frequency: 50Hz
Phase: Single Phase
Insulation Class: Class F
Enclosure reference: IP20
Engine construction: Single-Cylinder, Four-Stroke, Air-Cooled
Nominal displacement: 667 ml
Speed: 3000r/min
Oil Capacity: 2L
Fuel tank: 12.5L
Starting options: Electric Start + ATS Auto-Transfer
Listed dimensions: 780 × 585 × 705mm
Net mass: 160kg

Discuss this option ↗

REFERENCE 0303-49

Diesel generator with electric start and transfer-system enquiry

Confirm the selected electrical nameplate, engine and transfer arrangement. Output data needs current clarification.

Frequency: 50Hz
Insulation Class: F (155°C)
Enclosure reference: IP20
Engine construction: Single-Cylinder, Four-Stroke, Air-Cooled
Nominal displacement: 532 ml
Rated Speed: 3000r/min
Oil quantity: 1.65L
Fuel tank: 12.5L
Consumption reference, stated duty: 2.5L/h (at rated load)
Starting options: Electric Start + ATS Auto-Transfer
External Dimensions: 740 × 530 × 610mm
Net mass: 122kg

Discuss this option ↗

REFERENCE 0303-50

Enclosed diesel frequency/voltage builds — configuration A

Compare the separate electric-start articles and their actual phase arrangements.

Generation layout: Revolving field type2 pole generator
Frequency: 60Hz
AC continuous power: 5KW
AC voltage: 240V A.C
AC current: 20.8A A.C
Engine Speed: 3600r/min
Phase: Single/Three
Power factor: 1/0.8
Excitation System: Controlled Constant Operation
D.C output: 12V/8.3A
Coupling Pattern: Straight shaft coupling
Engine construction: Direct Injection Vertical, 4-cycle, Air-cooled diesel engine
Nominal displacement: 406cc
Starting options: Electric
Governor system: centrifugal weight system
Fuel: Diesel light fuel(BS-AL or equivalent)
Fuel tank: 16L
Oil quantity: 1.65L
Bore/stroke: 86*70mm
Protection system: Low-oil warning/shutdown, version-specific; confirm selected unit
Listed dimensions: 950*580*740mm
Dry mass: 165KG

Discuss this option ↗

REFERENCE 0303-51

Enclosed diesel frequency/voltage builds — configuration B

Compare the separate electric-start articles and their actual phase arrangements.

Generation layout: Revolving field type2 pole generator
Frequency: 50Hz
AC continuous power: 4.2KW
AC voltage: 380V A.C
AC current: 11A A.C
Engine Speed: 3000r/min
Phase: Single/Three
Power factor: 1/0.8
Excitation System: Controlled Constant Operation
D.C output: 12V/8.3A
Coupling Pattern: Straight shaft coupling
Engine construction: Direct Injection Vertical, 4-cycle, Air-cooled diesel engine
Nominal displacement: 406cc
Starting options: Electric
Governor system: centrifugal weight system
Fuel: Diesel light fuel(BS-AL or equivalent)
Fuel tank: 16L
Oil quantity: 1.65L
Bore/stroke: 86*70mm
Protection system: Low-oil warning/shutdown, version-specific; confirm selected unit
Listed dimensions: 950*580*740mm
Dry mass: 165KG

Discuss this option ↗

REFERENCE 0303-52

Enclosed diesel frequency/voltage builds — configuration C

Compare the separate electric-start articles and their actual phase arrangements.

Generation layout: Revolving field type2 pole generator
Frequency: 50Hz
AC continuous power: 4.2KW
AC voltage: 230V A.C
AC current: 18.3A A.C
Engine Speed: 3000r/min
Phase: Single/Three
Power factor: 1/0.8
Excitation System: Controlled Constant Operation
D.C output: 12V/8.3A
Coupling Pattern: Straight shaft coupling
Engine construction: Direct Injection Vertical, 4-cycle, Air-cooled diesel engine
Nominal displacement: 406cc
Starting options: Electric
Governor system: centrifugal weight system
Fuel: Diesel light fuel(BS-AL or equivalent)
Fuel tank: 16L
Oil quantity: 1.65L
Bore/stroke: 86*70mm
Protection system: Low-oil warning/shutdown, version-specific; confirm selected unit
Listed dimensions: 950*580*740mm
Dry mass: 165KG

Discuss this option ↗

REFERENCE 0303-53

Single/three-phase enclosed diesel set

The phase and apparent-power columns need the actual power-factor and current confirmation.

AC rated power: 6.0 / 7.5 kVA
Peak Output: 6.5 / 8.1 kVA
Frequency: 50Hz
AC voltage: 230V (single-phase) / 400V (three-phase)
DC Output: 12V / 8.3A
Excitation Method: Brushed self-excitation
Engine construction: Single-cylinder, four-stroke, air-cooled, vertical
Insulation Class: H-class (180°C)
Bore/stroke: 92 × 75mm
Nominal displacement: 0.499L (499cc)
Compression reference: 19.5:1
Engine Power: 7.6kW
Starting options: Electric start
Oil Capacity: 1.65L
Listed dimensions: 910 × 530 × 840mm
Net mass: 171kg

Discuss this option ↗

REFERENCE 0303-54

Larger enclosed diesel reference

Confirm which output belongs to each alternator/phase version before quoting.

AC rated power: 6.6/8.3KVA
AC maximum power: 7.5/9.3KVA
Frequency: 50Hz
AC voltage: 230V
DC OUTput: 12V8.3A
Excitation Method: Brushed Self Excitation
Engine construction: Single Cylinder, Four Stroke, Air Cooled, Vertical
Insulation Level: H
Nominal displacement: 0.532L
Compression reference: 20.0:1
Engine Power: 8.0KW
Starting options: Electric Start
Oil quantity: 1.65L
Listed dimensions: 910*530*840mm
Weight: 175KG

Discuss this option ↗

REFERENCE 0303-55

Heavy enclosed diesel reference

Use the selected article schedule rather than converting the product-heading wattage into a rating.

AC rated power: 8.0/10.0KVA
AC maximum power: 8.5/10.6KVA
Frequency: 50Hz
AC voltage: 230V
DC OUTput: 12V8.3A
Excitation Method: Brushed Self Excitation
Engine construction: Single Cylinder, Four Stroke, Air Cooled, Vertical
Insulation Level: H
Bore/stroke (unit unstated): 100*85
Nominal displacement: 0.667L
Compression reference: 20.0:1
Engine Power: 10.2KW
Starting options: Electric Start
Oil quantity: 2.0L
Listed dimensions: 1120*695*756mm
Weight: 210KG

Discuss this option ↗

REFERENCE 0303-56

Twin-cylinder diesel and transfer-system enquiry

Confirm the selected electrical nameplate, engine and transfer arrangement. Output data needs current clarification.

Speed: 3000rpm
Frequency: 50Hz/60Hz
Frame style: Portable Type
Weight: 326KGS
Cooling System Type: Air cooling System
Engine construction: Double cylinder, Air-cooled, 4-stroke vertical
Voltage Regulate: AVR
Fuel tank: 35/9.24L/gal
Packing dimensions: 1345*820*850mm
Net mass: 326KGS
Per 40 GP CNT: 44pcs

Discuss this option ↗

REFERENCE 0303-57

Diesel inverter generator range

Keep the three columns paired and confirm each current engine and emissions configuration.

Configurations: A; B; C
Generation layout: Diesel Inverter Generator
Frequency: 50Hz
AC voltage: 230V
AC rated power: 3000W; 5000W; 6000W
AC maximum power: 3500W; 5500W; 6500W
Power factor: 1.0
Waveform reference (%): ≤3%
Overload-control reference: Frequency converter overcurrent protection program control
Altitude reference: ≤1000m
Engine construction: Single cylinder, 4-stroke, Forced air cooling
Nominal displacement: 296cc; 456cc; 531cc
Fuel: Diesel
Fuel tank: 18L
Oil quantity: 1.1L; 1.7L; 1.7L
Starting options: Electric start
Listed dimensions: 670*510*615mm
Net mass: 60kg; 80kg; 80kg

Discuss this option ↗

REFERENCE 0303-58

Small single-cylinder gasoline engines

Compare shaft geometry, mounting, rotation, starter and filter arrangement before fitting an engine to equipment.

Configurations: A; B
Engine construction: Air-cooled 4 stroke OHV Single Cylinder
Bore/stroke: 68mm*45mm; —
Nominal displacement: 163cc; —
Compression reference: 8.5:1
Engine maximum output: 5.5HP/3600rpm; 6.5HP/3600rpm
Engine torque: 10.8N.m/2500rpm; 11N.m/2500rpm
Ignition System: Non-contact Transistorized Ignition(TCI)
Fuel tank: 3.6L
Consumption reference, stated duty: 290g/HP-hour
Oil quantity: 0.6L
Listed dimensions: 380*325*340mm
Gross mass: 14.5kg
Quantity for Container: 630/1498pcs
Air cleaner options: Semi-dry, oil-bath, dual or cyclone; confirm selected intake

Discuss this option ↗

REFERENCE 0303-59

Larger single-cylinder gasoline engine

Request shaft-end and mounting drawings and the actual rated-duty data.

Engine construction: Air-cooled 4 Stroke OHV single cylinder
Bore/stroke: 88mm*64mm
Nominal displacement: 389cc
Engine maximum output: 13HP/3600rpm
Ignition System: Non-contact transistorized ignition(TCI)
Fuel tank: 6.5L
Consumption reference, stated duty: 290g/HP-hour
Oil quantity: 1.1L
Listed dimensions: 510*420*475mm
Gross mass: 34kg
Quantity for container: 240/600pcs
Air cleaner options: Semi-dry, oil-bath, dual or cyclone; confirm selected intake

Discuss this option ↗

REFERENCE 0303-60

Twin-cylinder gasoline power unit

Match the horizontal output shaft, cooling, mounting and governor to the driven equipment.

Engine construction: Double Cylinder, Four Stroke(OHV)
Bore/stroke: 78*70mm
Nominal displacement: 669cc
Compression reference: 8.5:1
Engine net torque: 45N.m/2500rpm
PTO shaft rotation: Counterclockwise(horizontal shaft output)
Starting options: Electric Starter
Lubrication System: Forced Splash
Carburetor: Double Chamber Float Carburetor
Governor System: Electronic&mechanical Speed Control
Air Cleaner: Dual Elements(Paper or Foam)
Oil quantity: 1.6L
Listed dimensions: 550*460*345mm
Net mass: 45Kg
Engine net output: 15.5kw/3600rpm

Discuss this option ↗

REFERENCE 0303-61

Vertical single-cylinder diesel engine

The two engine-speed columns have different continuous and maximum powers.

Configurations: A; B
Engine construction: Vertical, single cylinder, four stroke, air-cooled, direct injection
Bore/stroke: 86mm*72mm
Nominal displacement: 0.418L
Engine rated output: 5.8 kw; 6.3 kw
Engine maximum output: 6.3 kw; 6.9 kw
Fuel: 0#/-10#/-20#
Engine Oil Type: CD grade or SAE 10W-30/15W-40
Compression reference: 19
Rotation Direction: anticlockwise
Starting options: Manual or electric start; confirm mechanism
Oil quantity: 1.65L
Fuel tank: 5.5L
Listed dimensions: 510*475*565 mm
Gross mass: 50kgs

Discuss this option ↗

REFERENCE 0303-62

50 mm gasoline pump

Confirm the duty point against the pump curve, water condition, hose length and priming arrangement. Published head, suction and flow labels are not a guarantee of simultaneous maxima.

Connect system: 50mm
Lift height: 28m
Suction height: 7m
Rated flow: 30m³/h
Nominal displacement: 163CC
Rated speed: 3600RPM
Output power: 3.2KW
Fuel tank: 3.6L
Weight: 21.5KG
Listed dimensions: 470*375*385mm
Fuel: Gasoline

Discuss this option ↗

REFERENCE 0303-63

80 mm gasoline pump

Confirm the duty point against the pump curve, water condition, hose length and priming arrangement. Published head, suction and flow labels are not a guarantee of simultaneous maxima.

Connect system: 80mm
Lift height: 30m
Suction height: 7m
Rated flow: 60m³/h
Nominal displacement: 196CC
Rated speed: 3600RPM
Output power: 3.8KW
Fuel tank: 3.6L
Weight: 22.5KG
Listed dimensions: 505*380*415mm
Fuel: Gasoline

Discuss this option ↗

REFERENCE 0303-64

100 mm gasoline pump

Confirm the duty point against the pump curve, water condition, hose length and priming arrangement. Published head, suction and flow labels are not a guarantee of simultaneous maxima.

Connect system: 100mm
Lift height: 28m
Suction height: 7m
Rated flow: 80m³/h
Nominal displacement: 270CC
Rated speed: 3600RPM
Output power: 4.2KW
Fuel tank: 6L
Weight: 40KG
Listed dimensions: 640*465*515mm

Discuss this option ↗

REFERENCE 0303-65

150 mm gasoline pump

Confirm the duty point against the pump curve, water condition, hose length and priming arrangement. Published head, suction and flow labels are not a guarantee of simultaneous maxima.

Connect system: 150mm
Lift height: 18m
Suction height: 5m
Rated flow: 150m³/h
Nominal displacement: 420CC
Rated speed: 3600RPM
Output power: 6.0KW
Fuel tank: 6.5L
Weight: 78KG
Listed dimensions: 755*535*665mm

Discuss this option ↗

REFERENCE 0303-66

50 mm diesel pump

Confirm the duty point against the pump curve, water condition, hose length and priming arrangement. Published head, suction and flow labels are not a guarantee of simultaneous maxima.

Connect system: 50mm
Lift height: 25m
Suction height: 7m
Rated flow: 36m³/h
Nominal displacement: 211CC
Rated speed: 3600RPM
Output power: 2.8KW
Fuel tank: 2.5L
Weight: 40.5KG
Listed dimensions: 510*450*470mm

Discuss this option ↗

REFERENCE 0303-67

80 mm diesel pump

Confirm the duty point against the pump curve, water condition, hose length and priming arrangement. Published head, suction and flow labels are not a guarantee of simultaneous maxima.

Connect system: 80mm
Lift height: 25m
Suction height: 7m
Rated flow: 60m³/h
Nominal displacement: 305CC
Rated speed: 3600RPM
Output power: 4.0KW
Fuel tank: 3.5L
Weight: 43KG
Listed dimensions: 580*460*565mm

Discuss this option ↗

REFERENCE 0303-68

100 mm diesel pump

Confirm the duty point against the pump curve, water condition, hose length and priming arrangement. Published head, suction and flow labels are not a guarantee of simultaneous maxima.

Connect system: 100mm
Lift height: 25m
Suction height: 8m
Rated flow: 96m³/h
Nominal displacement: 406CC
Rated speed: 3600RPM
Output power: 6.3KW
Fuel tank: 5.5L
Weight: 46KG
Listed dimensions: 650*515*630mm

Discuss this option ↗

REFERENCE 0303-69

Alternative-head 100 mm diesel pump

Confirm the duty point against the pump curve, water condition, hose length and priming arrangement. Published head, suction and flow labels are not a guarantee of simultaneous maxima.

Connect system: 100mm
Lift height: 29m
Suction height: 8m
Rated flow: 55m³/h
Nominal displacement: 296CC
Rated speed: 3600RPM
Output power: 4.0KW
Fuel tank: 12L
Weight: 49KG
Listed dimensions: 560*505*720mm

Discuss this option ↗

REFERENCE 0303-70

Axial-pump gasoline washer

Compare pump, nozzle, hose, water supply and engine duty. Confirm current pressure/flow test conditions; some source unit conversions require clarification.

Horse Power: 7.5HP
Flow: 8.5(L/min)
Rated Pressure: 20Mpa(2900psi)
Max Pressure: 22Mpa(3190psi)
Nominal displacement: 223CC
Pump Type: Axial pump
Engine Speed: 3600(RPM)
Ambient: 0℃-60℃
Oil quantity: 0.6L
Fuel tank: 3.6L
Fuel: Gasoline
Gross mass: 31KG
Listed dimensions: 695x445x485mm

Discuss this option ↗

REFERENCE 0303-71

Mobile gasoline washer

Compare pump, nozzle, hose, water supply and engine duty. Confirm current pressure/flow test conditions; some source unit conversions require clarification.

Horse Power: 7.0HP
Flow: 8.3(L/min)
Rated Pressure: 18Mpa(2600psi)
Max Pressure: 20Mpa(2900psi)
Nominal displacement: 212CC
Pump Type: Axial pump
Engine Speed: 3600(RPM)
Ambient: 0℃-60℃
Oil quantity: 0.6L
Fuel tank: 3.6L
Fuel: Gasoline
Gross mass: 30KG
Listed dimensions: 625x410x640mm

Discuss this option ↗

REFERENCE 0303-72

196 cc axial-pump washer

Compare pump, nozzle, hose, water supply and engine duty. Confirm current pressure/flow test conditions; some source unit conversions require clarification.

Horse Power: 6.5HP
Flow: 9.2(L/min)
Rated Pressure: 17Mpa(2465psi)
Max Pressure: 20Mpa(2900psi)
Nominal displacement: 196CC
Pump Type: Axial pump
Engine Speed: 3600(RPM)
Ambient: 0℃-60℃
Oil quantity: 0.6L
Fuel tank: 3.6L
Fuel: Gasoline
Gross mass: 29KG
Listed dimensions: 495x460x510mm

Discuss this option ↗

REFERENCE 0303-73

163 cc compact washer

Compare pump, nozzle, hose, water supply and engine duty. Confirm current pressure/flow test conditions; some source unit conversions require clarification.

Horse power: 5.5HP
Flow: 7.5(L/min)
Rated Pressure: 14MPA(2000psi)
Max Pressure: 16MPA(2300psi)
Nominal displacement: 163cc
Pump Type: Axial pump
Engine Speed: 3600(RPM)
Amkbient: 0℃-60℃
Oil quantity: 0.6L
Fuel tank: 3.6L
Fuel: Gasoline
Gross mass: 28KG
Listed dimensions: 530*425*490mm

Discuss this option ↗

REFERENCE 0303-74

Higher-flow gasoline washer

Compare pump, nozzle, hose, water supply and engine duty. Confirm current pressure/flow test conditions; some source unit conversions require clarification.

Horse power: 7.5HP
Flow: 14(L/min)
Nominal displacement: 223cc
Pump Type: Axial pump
Engine Speed: 3600(RPM)
Amkbient: 0℃-60℃
Oil quantity: 0.6L
Fuel tank: 3.6L
Fuel: Gasoline
Gross mass: 33KG
Listed dimensions: 570*560*620mm

Discuss this option ↗

REFERENCE 0303-75

Alternative-frame 163 cc washer

Compare pump, nozzle, hose, water supply and engine duty. Confirm current pressure/flow test conditions; some source unit conversions require clarification.

Horse Power: 5.5HP
Flow: 7.5(L/min)
Rated Pressure: 14Mpa(2000psi)
Max Pressure: 16Mpa(2300psi)
Nominal displacement: 163CC
Pump Type: Axial pump
Engine Speed: 3600(RPM)
Ambient: 0℃-60℃
Oil quantity: 0.6L
Fuel tank: 3.6L
Fuel: Gasoline
Gross mass: 28KG
Listed dimensions: 530x425x490mm

Discuss this option ↗

REFERENCE 0303-76

Alternative-frame 196 cc washer

Compare pump, nozzle, hose, water supply and engine duty. Confirm current pressure/flow test conditions; some source unit conversions require clarification.

Horse Power: 6.5HP
Flow: 9.2(L/min)
Nominal displacement: 196CC
Pump Type: Axial pump
Engine Speed: 3600(RPM)
Ambient: 0℃-60℃
Oil quantity: 0.6L
Fuel tank: 3.6L
Fuel: Gasoline
Gross mass: 29KG
Listed dimensions: 495x460x510mm

Discuss this option ↗

REFERENCE 0303-77

Diesel plunger-pump washer

Compare pump, nozzle, hose, water supply and engine duty. Confirm current pressure/flow test conditions; some source unit conversions require clarification.

Horse power: 9.0HP
Flow: 25.5(L/min)
Nominal displacement: 418cc
Pump Type: Plunger pump
Engine Speed: 3600(RPM)
Amkbient: 0℃-60℃
Oil quantity: 1.65L
Fuel tank: 3.5L
Fuel: Diesel
Gross mass: 38KG
Listed dimensions: 720*560*600mm

Discuss this option ↗

REFERENCE 0303-78

Gasoline plunger-pump washer

Compare pump, nozzle, hose, water supply and engine duty. Confirm current pressure/flow test conditions; some source unit conversions require clarification.

Horse power: 9.0HP
Flow: 18(L/min)
Nominal displacement: 270cc
Pump Type: Plunger pump
Engine Speed: 3600(RPM)
Amkbient: 0℃-60℃
Oil quantity: 1.1L
Fuel tank: 5.5L
Fuel: Gasoline
Gross mass: 35KG
Listed dimensions: 720*560*600mm

Discuss this option ↗

REFERENCE 0303-79

Electric industrial washer

Verify input power, motor, controls, water supply and the pressure/flow operating point.

Power Supply: 380V/50Hz
Working Pressure: 1-20MPA(Adjustable)
Max Pressure: 20MPA
Power: 4KW
Speed: 1450(RPM)
Theoretical Flow Rate: ≤20L/min
Net mass: 56KG
Gross mass: 58.5KG
Listed dimensions: 795*375*470mm

Discuss this option ↗

REFERENCE 0303-80

Battery-powered washing gun

Assess portability, water source, nozzles, battery and actual test duty.

Battery reference: 2000mAh/4000mAh
Voltage: 20V Li-ion Battery
Working Flow: 2.5-3.0L/min

Discuss this option ↗

REFERENCE 0303-81

Compact three-support lithium forklift

Match the current battery, charger, mast, fork and tyre arrangement to the load and site. Nominal rating is not residual capacity at every height; environmental suitability needs separate approval.

Power Type: LiFePO4 Battery
Rated load: 1000kg
Load centre: 400mm
Lift height: 3000mm
Free lift: 50mm
Fork dimensions: 900*100*35mm
Mast tilt F/R: 2/4Deg
Vehicle mass: 1730kg
Length without forks: 1410mm
Overall width: 865mm
Mast, lowered: 2005mm
Mast, extended: 3920mm
Guard height: 1860mm
Turning radius: 1226mm
Front overhang: 260mm
Front/rear tread: 650mm
Frame clearance: 35mm
Mast clearance: 85mm
Wheelbase: 975mm
Fork spread: 200/880mm
Lift, loaded: 240mm/s
Grade, reference: 7 %
Driving Trait: Rear
Drive motor: 1.7 kw
Lift motor: 2.5 kw
Controller / Driving Type: AC+DC
Travel, loaded: 7 Km/h
Front tyre reference (×2): 305*145
Rear tyre reference (×2): 230*70

Discuss this option ↗

REFERENCE 0303-82

1.2-tonne three-support lithium forklift

Match the current battery, charger, mast, fork and tyre arrangement to the load and site. Nominal rating is not residual capacity at every height; environmental suitability needs separate approval.

Power Type: LiFePO4 Battery
Rated load: 1200kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 85mm
Fork dimensions: 1070*100*35mm
Mast tilt F/R: 6/12Deg
Vehicle mass: 1800kg
Length without forks: 1575mm
Overall width: 927mm
Mast, lowered: 2080mm
Mast, extended: 3920mm
Guard height: 1975mm
Turning radius: 1350mm
Front overhang: 358mm
Front/rear tread: 800/255mm
Frame clearance: 65mm
Mast clearance: 90mm
Wheelbase: 1050mm
Fork spread: 200/880mm
Lift, loaded: 240mm/s
Grade, reference: 15 %
Driving Trait: Front
Drive motor: 6 kw
Lift motor: 6 kw
Controller / Driving Type: AC+DC
Travel, loaded: 12 Km/h
Front tyre reference (×2): 6.50-10-10PR
Rear tyre reference (×2): 4.00-8

Discuss this option ↗

REFERENCE 0303-83

1.5-tonne three-support lithium forklift

Match the current battery, charger, mast, fork and tyre arrangement to the load and site. Nominal rating is not residual capacity at every height; environmental suitability needs separate approval.

Power Type: LiFePO4 Battery
Rated load: 1500kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 85mm
Fork dimensions: 1070*100*35mm
Mast tilt F/R: 6/12Deg
Vehicle mass: 2900kg
Length without forks: 1970mm
Overall width: 1090mm
Mast, lowered: 2035mm
Mast, extended: 4060mm
Guard height: 2175mm
Turning radius: 1720mm
Front overhang: 450mm
Front/rear tread: 800/215mm
Frame clearance: 130mm
Mast clearance: 120mm
Wheelbase: 1350mm
Fork spread: 200/880mm
Lift, loaded: 240mm/s
Grade, reference: 15 %
Driving Trait: Front
Drive motor: 6 kw
Lift motor: 6 kw
Controller / Driving Type: AC+DC
Travel, loaded: 15 Km/h
Front tyre reference (×2): 6.50-10-10PR
Rear tyre reference (×2): 4.00-8

Discuss this option ↗

REFERENCE 0303-84

1.8-tonne three-support lithium forklift

Match the current battery, charger, mast, fork and tyre arrangement to the load and site. Nominal rating is not residual capacity at every height; environmental suitability needs separate approval.

Power Type: LiFePO4 Battery
Rated load: 1800kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 85mm
Fork dimensions: 1070*100*35mm
Mast tilt F/R: 6/12Deg
Vehicle mass: 3000kg
Length without forks: 1970mm
Overall width: 1090mm
Mast, lowered: 2035mm
Mast, extended: 4060mm
Guard height: 2175mm
Turning radius: 1720mm
Front overhang: 450mm
Front/rear tread: 800/215mm
Frame clearance: 130mm
Mast clearance: 120mm
Wheelbase: 1350mm
Fork spread: 200/880mm
Lift, loaded: 240mm/s
Grade, reference: 15 %
Driving Trait: Front
Drive motor: 9 kw
Lift motor: 6 kw
Controller / Driving Type: AC+DC
Travel, loaded: 15 Km/h
Front tyre reference (×2): 6.50-10-10PR
Rear tyre reference (×2): 4.00-8

Discuss this option ↗

REFERENCE 0303-85

Compact four-wheel lithium forklift

Match the current battery, charger, mast, fork and tyre arrangement to the load and site. Nominal rating is not residual capacity at every height; environmental suitability needs separate approval.

Power Type: LiFePO4 Battery
Rated load: 1500kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 100mm
Fork dimensions: 1220*100*35mm
Mast tilt F/R: 6/12Deg
Vehicle mass: 2500kg
Length without forks: 2200mm
Overall width: 1090mm
Mast, lowered: 2025mm
Mast, extended: 3960mm
Guard height: 2170mm
Turning radius: 1960mm
Front overhang: 450mm
Front/rear tread: 890/920mm
Frame clearance, empty/loaded: 118/108mm
Mast clearance, empty/loaded: 110/100mm
Wheelbase: 1380mm
Fork spread: 240/980mm
Lift, loaded: 320mm/s
Grade, reference: 15 %
Drive motor: 6 kw
Lift motor: 6 kw
Controller / Driving Type: AC+DC
Travel, loaded: 16 Km/h
Front tyre reference (×2): 6.50-10-10PR
Rear tyre reference (×2): 5.00-8-10PR

Discuss this option ↗

REFERENCE 0303-86

2-tonne four-wheel lithium forklift

Match the current battery, charger, mast, fork and tyre arrangement to the load and site. Nominal rating is not residual capacity at every height; environmental suitability needs separate approval.

Power Type: Battery
Rated load: 2000kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 130mm
Fork spread: 300/1200mm
Mast tilt F/R: 6/12deg
Front overhang: 482mm
Mast, lowered: 2090mm
Mast, extended: 4050mm
Guard height: 2120mm
Turning radius: 2320mm
Right-angle aisle: 1910mm
Travel, empty/loaded: 18km/h
Lift, empty/loaded: 300mm/s
Vehicle mass: 3600kg
Grade, reference: 15 %
Front tyre reference: 7.00-12-12PR
Rear tyre reference: 6.00-9-10PR
Front tread: 970mm
Rear tread: 970mm
Wheelbase: 1680mm
Mast clearance, empty/loaded: 152/132mm
Frame clearance, empty/loaded: 158/138mm
Drive motor: 11kW
Lift motor: 10kW
Hydraulic pressure: 17.5mpa
Battery reference: 80V/250Ah
Enquiry options: Windscreen; Warning lamp; Full free mast; Colour; Seat options; solid tires; Extend fork; Rear lighting; Fire extinguisher; Cab; Rear lamp; Small fan; Light frame; Heater

Discuss this option ↗

REFERENCE 0303-87

2.5-tonne four-wheel lithium forklift

Match the current battery, charger, mast, fork and tyre arrangement to the load and site. Nominal rating is not residual capacity at every height; environmental suitability needs separate approval.

Power Type: Battery
Rated load: 2500kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 130mm
Fork spread: 300/1200mm
Mast tilt F/R: 6/12deg
Front overhang: 482mm
Mast, lowered: 2090mm
Mast, extended: 4050mm
Guard height: 2120mm
Turning radius: 2380mm
Right-angle aisle: 2000mm
Travel, empty/loaded: 18km/h
Lift, empty/loaded: 300mm/s
Vehicle mass: 3900kg
Grade, reference: 15 %
Front tyre reference: 7.00-12-12PR
Rear tyre reference: 6.00-9-10PR
Front tread: 970mm
Rear tread: 970mm
Wheelbase: 1680mm
Mast clearance, empty/loaded: 152/132mm
Frame clearance, empty/loaded: 158/138mm
Drive motor: 11kW
Lift motor: 10kW
Hydraulic pressure: 17.5mpa
Battery reference: 80V/250Ah
Enquiry options: Windscreen; Warning lamp; Full free mast; Colour; Seat options; solid tires; Extend fork; Rear lighting; Fire extinguisher; Cab; Rear lamp; Small fan; Light frame; Heater

Discuss this option ↗

REFERENCE 0303-88

3.5-tonne lithium counterbalance forklift

Match the current battery, charger, mast, fork and tyre arrangement to the load and site. Nominal rating is not residual capacity at every height; environmental suitability needs separate approval.

General / Power Type: Battery
Rated load: 3500kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 130mm
Fork dimensions: 1070*125*45mm
Fork spread: 300/1200mm
Mast tilt F/R: 6/12deg
Front overhang: 490mm
Length without forks: 2730mm
Length with forks: 3800mm
Listed wheel width: 1225mm
Mast, lowered: 2095mm
Mast, extended: 4180mm
Guard height: 2130mm
Turning radius: 2510mm
Right-angle aisle: 2200mm
Travel, empty/loaded: 18km/h
Lift, empty/loaded: 300mm/s
Vehicle mass: 4600kg
Grade, reference: 15 %
Front tyre reference: 28*9-15-12PR
Rear tyre reference: 6.50-10-10PR
Front tread: 1000mm
Rear tread: 970mm
Wheelbase: 1700mm
Mast clearance, empty/loaded: 152/132mm
Frame clearance, empty/loaded: 158/138mm
Drive motor: 16kW
Lift motor: 13kW
Hydraulic pressure: 17.5mpa
Battery reference: 80V/350Ah

Discuss this option ↗

REFERENCE 0303-89

3.8-tonne lithium counterbalance forklift

Match the current battery, charger, mast, fork and tyre arrangement to the load and site. Nominal rating is not residual capacity at every height; environmental suitability needs separate approval.

General / Power Type: LiFePO4 Battery
Rated load: 3800kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 115mm
Fork dimensions: 1220x122x45mm
Mast tilt F/R: 6/12Deg
Vehicle mass: 5000kg
Length without forks: 2600mm
Overall width: 1205mm
Mast, lowered: 2095mm
Mast, extended: 4210mm
Guard height: 2140mm
Turning radius: 2560mm
Front overhang: 448mm
Front/rear tread: 1000/980mm
Frame clearance, empty/loaded: 165/155mm
Mast clearance, empty/loaded: 150/140mm
Wheelbase: 1790mm
Fork spread: 240/1100mm
Travel, loaded: 18 Km/h
Lift, loaded: 300mm/s
Grade, reference: 16 %
Drive motor: 22 kw
Lift motor: 14 kw
Controller / Driving Type: AC+DC
Front tyre reference (×2): 28X9-15-12PR
Rear tyre reference (×2): 6.50-10-10PR

Discuss this option ↗

REFERENCE 0303-90

5-tonne lithium counterbalance forklift

Match the current battery, charger, mast, fork and tyre arrangement to the load and site. Nominal rating is not residual capacity at every height; environmental suitability needs separate approval.

Power Type: Battery
Rated load: 5000kg
Load centre: 600mm
Lift height: 3000mm
Free lift: 150mm
Fork dimensions: 1220*150*70mm
Turning radius: 3200mm
Vehicle mass: 8250kg
Travel, empty/loaded: 18/18km/h
Lift, empty/loaded: 500/550mm/s
Grade, reference: 15 %
Front tyre reference: 8.25-15-14PR
Rear tyre reference: 8.25-15-14PR
Front tread: 1470mm
Rear tread: 1700mm
Wheelbase: 2250mm
(unload/load) Chassis: 260/250mm
Drive motor: 40 kw
Lift motor: 30 kw
Hydraulic pressure: 17.5mpa
Battery reference: 80V/600Ah

Discuss this option ↗

REFERENCE 0303-91

6-tonne lithium counterbalance forklift

Match the current battery, charger, mast, fork and tyre arrangement to the load and site. Nominal rating is not residual capacity at every height; environmental suitability needs separate approval.

Power Type: LiFePO4 Battery
Rated load: 6000kg
Load centre: 600mm
Lift height: 3000mm
Free lift: 190mm
Fork dimensions: 1220*150*70mm
Mast tilt F/R: 6/12Deg
Vehicle mass: 9100kg
Length without forks: 3615mm
Overall width: 2000mm
Mast, lowered: 2520mm
Mast, extended: 4360mm
Guard height: 2490mm
Turning radius: 3410mm
Front overhang: 590mm
Front/rear tread: 1470/1700mm
Frame clearance, empty/loaded: 260/250mm
Mast clearance, empty/loaded: 190/160mm
Wheelbase: 2250mm
Fork spread: 300/1830mm
Lift, loaded: 400mm/s
Grade, reference: 15 %
Drive motor: 40 kw
Lift motor: 30 kw
Controller / Driving Type: AC+DC
Travel, loaded: 18 Km/h
Front tyre reference (×2): 8.25-15-14PR
Rear tyre reference (×2): 8.25-15-14PR

Discuss this option ↗

REFERENCE 0303-92

7-tonne lithium counterbalance forklift

Match the current battery, charger, mast, fork and tyre arrangement to the load and site. Nominal rating is not residual capacity at every height; environmental suitability needs separate approval.

Power Type: LiFePO4 Battery
Rated load: 7000kg
Load centre: 600mm
Lift height: 3000mm
Free lift: 190mm
Fork dimensions: 1220*150*70mm
Mast tilt F/R: 6/12Deg
Vehicle mass: 9500kg
Length without forks: 3660mm
Overall width: 2000mm
Mast, lowered: 2520mm
Mast, extended: 4360mm
Guard height: 2490mm
Turning radius: 3450mm
Front overhang: 590mm
Front/rear tread: 1470/1700mm
Frame clearance, empty/loaded: 260/250mm
Mast clearance, empty/loaded: 190/160mm
Wheelbase: 2250mm
Fork spread: 300/1830mm
Lift, loaded: 400mm/s
Grade, reference: 15 %
Drive motor: 50 kw
Lift motor: 40 kw
Controller / Driving Type: AC+DC
Travel, loaded: 18 Km/h
Front tyre reference (×2): 8.25-15-14PR
Rear tyre reference (×2): 8.25-15-14PR

Discuss this option ↗

REFERENCE 0303-93

Heavy lithium counterbalance forklift

Match the current battery, charger, mast, fork and tyre arrangement to the load and site. Nominal rating is not residual capacity at every height; environmental suitability needs separate approval.

Power Type: LiFePO4 Battery
Rated load: 10000kg
Load centre: 600mm
Lift height: 3000mm
Free lift: 190mm
Fork dimensions: 1220*160*80mm
Mast tilt F/R: 6/12Deg
Vehicle mass: 14100kg
Length without forks: 4295mm
Overall width: 2170mm
Mast, lowered: 2545mm
Mast, extended: 4190mm
Guard height: 2590mm
Turning radius: 3960mm
Front overhang: 625mm
Front/rear tread: 1600/1700mm
Frame clearance, empty/loaded: 305/295mm
Mast clearance, empty/loaded: 225/215mm
Wheelbase: 2850mm
Fork spread: 435/2140mm
Lift, loaded: 300mm/s
Grade, reference: 16 %
Drive motor: 60 kw
Lift motor: 50 kw
Controller / Driving Type: AC+DC
Travel, loaded: 18 Km/h
Front tyre reference (×2): 9.00-20
Rear tyre reference (×2): 9.00-20

Discuss this option ↗

REFERENCE 0303-94

2-tonne gasoline/LPG forklift

Use the detailed gasoline/LPG power description; approve the engine, fuel arrangement, emissions documents and ventilation requirements. Other gas-fuel claims require confirmation.

Power Type: Gasoline/LPG
Rated load: 2000kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 110mm
Fork dimensions: 1070x120x40mm
Fork spread: 240/1040mm
Mast tilt F/R: 6/12Deg
Vehicle mass: 3800kg
Front overhang: 480mm
Length without forks: 2500mm
Length with forks: 3570mm
Listed wheel width: 1160mm
Mast, lowered: 2050mm
Mast, extended: 4000mm
Guard height: 2150mm
Turning radius: 2320mm
Right-angle aisle: 1910mm
Travel, empty/loaded: 20/18.5km/h
Lift, empty/loaded: 510/450mm/s
Front tyre reference: 7.00-12-12PR
Rear tyre reference: 6.00-9-10PR
Front tread: 970mm
Rear tread: 950mm
Wheelbase: 1650mm
Frame clearance, empty/loaded: 150/140mm
Mast clearance, empty/loaded: 160/150mm
Battery reference: 12/80 v/ah
Engine rated output: 37.4/2300 kw/r.p.m
Engine torque: 171.2/1600 n.m/r.p.m
Nominal displacement: 2488cc
Cylinders: 4
Bore/stroke: 89*100mm
Transmission type: Hydraulic
Transmission FWD/RVS: 1/1
Hydraulic pressure: 17.5mpa

Discuss this option ↗

REFERENCE 0303-95

2.5-tonne gasoline/LPG forklift

Use the detailed gasoline/LPG power description; approve the engine, fuel arrangement, emissions documents and ventilation requirements. Other gas-fuel claims require confirmation.

Power Type: Gasoline/LPG
Rated load: 2500kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 110mm
Fork dimensions: 1070x120x40mm
Fork spread: 240/1040mm
Mast tilt F/R: 6/12Deg
Vehicle mass: 4000kg
Front overhang: 480mm
Length without forks: 2570mm
Length with forks: 3640mm
Listed wheel width: 1160mm
Mast, lowered: 2050mm
Mast, extended: 4000mm
Guard height: 2150mm
Turning radius: 2380mm
Right-angle aisle: 2000mm
Travel, empty/loaded: 20/18.5km/h
Front tyre reference: 7.00-12-12PR
Rear tyre reference: 6.00-9-10PR
Front tread: 970mm
Rear tread: 950mm
Wheelbase: 1650mm
Frame clearance, empty/loaded: 150/140mm
Mast clearance, empty/loaded: 160/150mm
Battery reference: 12/80 v/ah
Engine rated output: 37.4/2300 kw/r.p.m
Engine torque: 171.2/1600 n.m/r.p.m
Nominal displacement: 2488cc
Cylinders: 4
Bore/stroke: 89*100mm
Transmission type: Hydraulic
Transmission FWD/RVS: 1/1
Hydraulic pressure: 17.5mpa

Discuss this option ↗

REFERENCE 0303-96

3-tonne gasoline/LPG forklift

Use the detailed gasoline/LPG power description; approve the engine, fuel arrangement, emissions documents and ventilation requirements. Other gas-fuel claims require confirmation.

Power Type: Gasoline/LPG
Rated load: 3000kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 115mm
Fork dimensions: 1070x122x45mm
Fork spread: 240/1100mm
Mast tilt F/R: 6/12Deg
Vehicle mass: 4200kg
Front overhang: 500mm
Length without forks: 2680mm
Length with forks: 3750mm
Listed wheel width: 1225mm
Mast, lowered: 2080mm
Mast, extended: 4200mm
Guard height: 2150mm
Turning radius: 2460mm
Right-angle aisle: 2105mm
Travel, empty/loaded: 20/18.5km/h
Front tyre reference: 28×9-15-12PR
Rear tyre reference: 6.50-10-10PR
Front tread: 1000mm
Rear tread: 980mm
Wheelbase: 1700mm
Frame clearance, empty/loaded: 145/135mm
Mast clearance, empty/loaded: 160/150mm
Battery reference: 12/80 v/ah
Engine rated output: 37.4/2300 kw/r.p.m
Engine torque: 171.2/1600 n.m/r.p.m
Nominal displacement: 2488cc
Cylinders: 4
Bore/stroke: 89*100mm
Transmission type: Hydraulic
Transmission FWD/RVS: 1/1
Hydraulic pressure: 17.5mpa

Discuss this option ↗

REFERENCE 0303-97

3.5-tonne gasoline/LPG forklift

Use the detailed gasoline/LPG power description; approve the engine, fuel arrangement, emissions documents and ventilation requirements. Other gas-fuel claims require confirmation.

Power Type: Gasoline/LPG
Rated load: 3500kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 115mm
Fork dimensions: 1220x122x45mm
Fork spread: 240/1100mm
Mast tilt F/R: 6/12Deg
Vehicle mass: 4500kg
Front overhang: 500mm
Length without forks: 2725mm
Length with forks: 3945mm
Listed wheel width: 1225mm
Mast, lowered: 2080mm
Mast, extended: 4200mm
Guard height: 2150mm
Turning radius: 2510mm
Right-angle aisle: 2200mm
Travel, empty/loaded: 20/18.5km/h
Front tyre reference: 28×9-15-12PR
Rear tyre reference: 6.50-10-10PR
Front tread: 1000mm
Rear tread: 980mm
Wheelbase: 1700mm
Frame clearance, empty/loaded: 145/135mm
Mast clearance, empty/loaded: 160/150mm
Battery reference: 12/80 v/ah
Engine rated output: 37.4/2300 kw/r.p.m
Engine torque: 171.2/1600 n.m/r.p.m
Nominal displacement: 2488cc
Cylinders: 4
Bore/stroke: 89*100mm
Transmission type: Hydraulic
Transmission FWD/RVS: 1/1
Hydraulic pressure: 17.5mpa

Discuss this option ↗

REFERENCE 0303-98

Compact diesel counterbalance forklift

Compare the exact engine and transmission column, mast, tyres and fork dimensions. Confirm the destination engine documentation and current capacity chart.

Power Type: Diesel
Rated load: 1500kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 100mm
Fork dimensions: 1070*120*40mm
Fork spread: 240/1040mm
Mast tilt F/R: 6/12deg
Front overhang: 450mm
Length without forks: 2200mm
Length with forks: 3270mm
Listed wheel width: 1090mm
Mast, lowered: 2025mm
Mast, extended: 3960mm
Guard height: 2170mm
Turning radius: 1960mm
Travel, empty/loaded: 20/18.5km/h
Lift, empty/loaded: 510/450mm/s
Grade, reference: 20 %
Vehicle mass: 3500kg
Front tyre reference: 6.50-10-10PR
Rear tyre reference: 5.00-8-10PR
Front tread: 970mm
Rear tread: 950mm
Wheelbase: 1650mm
Mast clearance, empty/loaded: 160/150mm
Frame clearance, empty/loaded: 150/140mm
Battery reference: 12/80 v/ah
Engine torque: 148/1800 n.m/r.p.m
Cylinders: 4
Transmission FWD/RVS: 1/1
Hydraulic pressure: 17.5mpa
Nominal displacement: 2540cc
Bore/stroke: 90*100mm

Discuss this option ↗

REFERENCE 0303-99

2.5-tonne diesel counterbalance forklift

Compare the exact engine and transmission column, mast, tyres and fork dimensions. Confirm the destination engine documentation and current capacity chart.

Configurations: A; B
Power Type: Diesel
Rated load: 2500kg
Load centre: 500mm
Lift height: 3000mm
Fork dimensions: 1070*120*40mm
Fork spread: 245/1030mm
Mast tilt F/R: 6/12deg
Front overhang: 480mm
Length without forks: 2570mm
Length with forks: 3640mm
Listed wheel width: 1160mm
Mast, lowered: 2050mm
Mast, extended: 4000mm
Guard height: 2150mm
Turning radius: 2380mm
Travel, empty/loaded: 20/18.5km/h
Lift, empty/loaded: 480mm/s
Grade, reference: 20 %
Vehicle mass: 4000kg
Front tyre reference: 7.00-12-12PR
Rear tyre reference: 6.00-9-10PR
Front tread: 970mm
Rear tread: 980mm
Wheelbase: 1650mm
Mast clearance, empty/loaded: 160/140mm
Frame clearance, empty/loaded: 150/130mm
Battery reference: 12/90 v/ah
Engine torque: 139/1800 n.m/r.p.m; 156/1700-1900 n.m/r.p.m
Transmission FWD/RVS: 1/1; 2/2
Hydraulic pressure: 17.5mpa
Nominal displacement: —; 2670cc
Cylinders: —; 4
Bore/stroke: —; 90*105mm
Enquiry options: Windscreen; Strobe light; 2 stage or 3 stage full free mast; Colour; Seat options; solid tires; Extended fork; Taillight; Fire extinguisher; Cabin; Blue taillight; Small fan; Light frame; All kinds of attachments; Heater

Discuss this option ↗

REFERENCE 0303-100

3.5-tonne diesel counterbalance forklift

Compare the exact engine and transmission column, mast, tyres and fork dimensions. Confirm the destination engine documentation and current capacity chart.

Configurations: A; B
Power Type: Diesel
Rated load: 3500kg
Load centre: 500mm
Lift height: 3000mm
Fork spread: 255/1100mm
Mast tilt F/R: 6/12deg
Front overhang: 500mm
Mast, lowered: 2080mm
Mast, extended: 4110mm
Guard height: 2200mm
Turning radius: 2510mm
Travel, empty/loaded: 20/18.5km/h
Lift, empty/loaded: 480mm/s; 510/450mm/s
Grade, reference: 20 %
Vehicle mass: 4500kg
Front tyre reference: 28*9-15-12PR
Rear tyre reference: 6.50-10-10PR
Front tread: 1000mm
Rear tread: 980mm
Wheelbase: 1700mm
Battery reference: 12/90V/Ah
Engine rated output: 44.9/2450 kw/r.p.m; 36.8/2500 kw/r.p.m
Engine torque: 189/1800 n.m/r.p.m; 156/1700-1900 n.m/r.p.m
Transmission FWD/RVS: 1/1; 2/2
Hydraulic pressure: 17.5mpa
Nominal displacement: —; 2670cc
Cylinders: —; 4
Bore/stroke: —; 90*105mm
Enquiry options: Windscreen; Warning lamp; Full free mast; Colour; Seat options; solid tires; Extend fork; Rear lighting; Fire extinguisher; Cab; Rear lamp; Small fan; Light frame; Heater
Mast clearance, empty/loaded (unit unstated): 160/140
Frame clearance, empty/loaded (unit unstated): 145/125

Discuss this option ↗

REFERENCE 0303-101

4.5-tonne diesel counterbalance configurations

Compare the exact engine and transmission column, mast, tyres and fork dimensions. Confirm the destination engine documentation and current capacity chart.

Configurations: A; B
Power Type: Diesel
Rated load: 4500kg
Load centre: 500mm
Lift height: 3000mm
Fork dimensions: 1220*150*50mm
Front overhang: 548mm
Length without forks: 3180mm
Length with forks: 4400mm
Listed wheel width: 1485mm
Mast, lowered: 2405mm
Mast, extended: 4222mm
Guard height: 2320mm
Turning radius: 2950mm
Travel, empty/loaded: 24/24km/h
Lift, empty/loaded: 500/460mm/s
Grade, reference: 19 %
Vehicle mass: 6200kg
Front tyre reference: 300-15-18PR
Rear tyre reference: 7.00-12-12PR
Front tread: 1180mm
Rear tread: 1190mm
Wheelbase: 2100mm
Mast clearance, empty/loaded: 175mm
Frame clearance, empty/loaded: 225mm
Engine torque: 285/1300-1500 n.m/r.p.m; 300/1600-1800 n.m/r.p.m
Nominal displacement: 4578cc; 3470cc
Cylinders: 4
Bore/stroke: 108*125mm; 98*115mm
Transmission FWD/RVS: 2/1; 2/2
Operating pressure: 19mpa
Engine rated output: —; 60/2200 kw/r.p.m
Enquiry options: Windscreen; Strobe light; 2 stage or 3 stage full free mast; Colour; Seat options; solid tires; Extended fork; Taillight; Fire extinguisher; Cabin; Blue taillight; Small fan; Light frame; All kinds of attachments; Heater

Discuss this option ↗

REFERENCE 0303-102

5-tonne diesel counterbalance forklift

Compare the exact engine and transmission column, mast, tyres and fork dimensions. Confirm the destination engine documentation and current capacity chart.

Configurations: A; B
Power Type: Diesel
Rated load: 5000kg
Load centre: 600mm
Lift height: 3000mm
Free lift: 190mm
Fork dimensions: 1220×150×60mm
Fork spread: 300/1830mm
Mast tilt F/R: 6/12deg
Vehicle mass: 8550kg
Front overhang: 590mm
Length without forks: 3570mm
Length with forks: 4790mm
Listed wheel width: 2000mm
Mast, lowered: 2520mm
Mast, extended: 4360mm
Guard height: 2490mm
Turning radius: 3370mm
Right-angle aisle: 3755mm
Travel, empty/loaded: 30/28km/h
Lift, empty/loaded: 600/400mm/s
Grade, reference: 20 %
Front tyre reference: 8.25-15-14PR
Rear tyre reference: 8.25-15-14PR
Front tread: 1470mm
Rear tread: 1700mm
Wheelbase: 2250mm
Frame clearance, empty/loaded: 190/160mm
Mast clearance, empty/loaded: 260/250mm
Transmission type: Hydraulic
Transmission FWD/RVS: 2/2
Hydraulic pressure: 18mpa

Discuss this option ↗

REFERENCE 0303-103

7-tonne diesel counterbalance forklift

Compare the exact engine and transmission column, mast, tyres and fork dimensions. Confirm the destination engine documentation and current capacity chart.

Configurations: A; B
Rated load: 7000kg
Load centre: 600mm
Lift height: 3000mm
Free lift: 190mm
Fork dimensions: 1220×150×70mm
Fork spread: 300/1830mm
Mast tilt F/R: 6/12deg
Vehicle mass: 9350kg
Front overhang: 590mm
Length without forks: 3660mm
Length with forks: 4880mm
Listed wheel width: 2000mm
Mast, lowered: 2520mm
Mast, extended: 4360mm
Guard height: 2490mm
Turning radius: 3450mm
Right-angle aisle: 3755mm
Travel, empty/loaded: 30/28km/h
Lift, empty/loaded: 600/400mm/s
Grade, reference: 20 %
Front tyre reference: 8.25-15-14PR
Rear tyre reference: 8.25-15-14PR
Front tread: 1470mm
Rear tread: 1700mm
Wheelbase: 2250mm
Frame clearance, empty/loaded: 190/160mm
Mast clearance, empty/loaded: 260/250mm
Engine torque: 411/1600 n.m/r.p.m; 385/2000 n.m/r.p.m
Nominal displacement: 6494cc; 5560cc
Cylinders: 6
Bore/stroke: 105×125mm; 101.6×114.3mm
Transmission type: Hydraulic
Transmission FWD/RVS: 2/2
Hydraulic pressure: 18mpa
Power Type: Diesel

Discuss this option ↗

REFERENCE 0303-104

8-tonne diesel counterbalance forklift

Compare the exact engine and transmission column, mast, tyres and fork dimensions. Confirm the destination engine documentation and current capacity chart.

Power Type: Diesel
Rated load: 8000kg
Load centre: 600mm
Lift height: 3000mm
Free lift: 230mm
Fork dimensions: 1220×150×70mm
Fork spread: 300/1830mm
Mast tilt F/R: 6/12deg
Vehicle mass: 9900kg
Front overhang: 590mm
Length without forks: 3660mm
Length with forks: 4880mm
Listed wheel width: 2000mm
Mast, lowered: 2520mm
Mast, extended: 4360mm
Guard height: 2490mm
Turning radius: 3450mm
Right-angle aisle: 3755mm
Travel, empty/loaded: 30/28km/h
Lift, empty/loaded: 600/400mm/s
Grade, reference: 20 %
Front tyre reference: 8.25-15-14PR
Rear tyre reference: 8.25-15-14PR
Front tread: 1470mm
Rear tread: 1700mm
Wheelbase: 2250mm
Frame clearance, empty/loaded: 190/160mm
Mast clearance, empty/loaded: 260/250mm
Engine rated output: 85/2000 kw/r.p.m
Nominal displacement: 5560cc
Cylinders: 6
Bore/stroke: 101.6×114.3mm
Transmission type: Hydraulic
Transmission FWD/RVS: 2/2
Hydraulic pressure: 18mpa

Discuss this option ↗

REFERENCE 0303-105

10-tonne diesel counterbalance forklift

Compare the exact engine and transmission column, mast, tyres and fork dimensions. Confirm the destination engine documentation and current capacity chart.

Power Type: Diesel
Rated load: 10000kg
Load centre: 600mm
Lift height: 3000mm
Free lift: 230mm
Fork spread: 350/2460mm
Mast tilt F/R: 6/6deg
Vehicle mass: 12700kg
Front overhang: 740mm
Listed wheel width: 2170mm
Mast, lowered: 2830mm
Mast, extended: 4335mm
Guard height: 2510mm
Turning radius: 3970mm
Right-angle aisle: 3540mm
Travel, empty/loaded: 30/24km/h
Lift, empty/loaded: 340/270mm/s
Grade, reference: 20 %
Front tyre reference: 9.00-20-14PR
Rear tyre reference: 9.00-20-14PR
Front tread: 1516mm
Rear tread: 1660mm
Wheelbase: 2800mm
Frame clearance, empty/loaded: 305mm
Mast clearance, empty/loaded: 230mm
Engine rated output: 85/2200 kw/r.p.m
Engine torque: 460/1300-1700 n.m/r.p.m
Nominal displacement: 4752cc
Cylinders: 4
Bore/stroke: 110×125mm
Transmission type: Hydraulic
Transmission FWD/RVS: 2/2
Hydraulic pressure: 18mpa

Discuss this option ↗

REFERENCE 0303-106

Heavy diesel counterbalance forklift

Compare the exact engine and transmission column, mast, tyres and fork dimensions. Confirm the destination engine documentation and current capacity chart.

Power Type: Diesel
Rated load: 12000kg
Load centre: 600mm
Lift height: 3000mm
Free lift: 275mm
Fork spread: 360/2460mm
Mast tilt F/R: 6/6deg
Vehicle mass: 14200kg
Front overhang: 755mm
Listed wheel width: 2200mm
Mast, lowered: 3080mm
Mast, extended: 4500mm
Guard height: 2540mm
Turning radius: 4700mm
Right-angle aisle: 3850mm
Travel, empty/loaded: 30/24km/h
Lift, empty/loaded: 340/270mm/s
Grade, reference: 20 %
Front tyre reference: 11.00-20-16PR
Rear tyre reference: 9.00-20-14PR
Front tread: 1724mm
Rear tread: 1850mm
Wheelbase: 3200mm
Frame clearance, empty/loaded: 305mm
Mast clearance, empty/loaded: 230mm
Engine rated output: 97/2200 kw/r.p.m
Engine torque: 622/1500 n.m/r.p.m
Nominal displacement: 4500cc
Cylinders: 4
Bore/stroke: 107×124mm
Transmission type: Hydraulic
Transmission FWD/RVS: 2/2
Hydraulic pressure: 18mpa

Discuss this option ↗

REFERENCE 0303-107

Additional mid-range diesel forklift

This separately listed diesel construction requires a current readable specification and load chart before selection.

Procurement direction: Mid-range diesel counterbalance handling
Required confirmation: Capacity, engine, mast and current article drawing

Discuss this option ↗

REFERENCE 0303-108

Additional diesel capacity configurations

Review the separate listed capacity directions against a current model-specific technical sheet.

Procurement direction: Additional mid-range diesel configurations
Required confirmation: Nominal and residual capacity, engine, transmission and mast

Discuss this option ↗

REFERENCE 0303-109

Intermediate heavy diesel enquiry

Request a current model schedule and capacity chart for the intended load class, engine and mast.

Construction direction: Heavy diesel counterbalance
Current approval required: Nominal rating, load centre, engine and mast
Scope: Configuration enquiry

Discuss this option ↗

REFERENCE 0303-110

Rough-ground 3-tonne forklift

Review ground bearing, terrain, slope, load stability and the exact tyre/drive configuration. A rough-ground description does not establish suitability for every off-road surface.

Power Type: Diesel
Rated load: 3000kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 70mm
Fork dimensions: 1220*125*50mm
Mast tilt F/R: 10/12deg
Turning radius: 3300mm
Right-angle aisle: 2815mm
Guard height: 2290mm
Front overhang: 585mm
Travel, loaded: 21km/h
Lift, loaded: 400mm/s
Grade, reference: 38 %
Length without forks: 3065mm
Listed wheel width: 1600mm
Front tyre reference: 14-17.5-14PR
Rear: 10.0/75-15.3-12PR
Wheelbase: 1880mm
tread: 1250/1190mm
Vehicle mass: 5300kg
Battery reference: 12/120V/Ah
Engine rated output: 45/2500 kw/r.p.m
Engine torque: 205/1600-1800 Nm/r.p.m
Bore/stroke: 98*105mm
Cylinders: 4
Nominal displacement: 3.17L
Fuel tank: 60L
Hydraulic pressure: 18.5Mpa
Frame clearance, empty: 245mm
Mast clearance, empty: 265mm
Transmission FWD/RVS: 2/1

Discuss this option ↗

REFERENCE 0303-111

Rough-ground 3.5-tonne forklift

Review ground bearing, terrain, slope, load stability and the exact tyre/drive configuration. A rough-ground description does not establish suitability for every off-road surface.

Power Type: Diesel
Rated load: 3500kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 70mm
Fork dimensions: 1220*125*50mm
Mast tilt F/R: 10/12deg
Turning radius: 3300mm
Right-angle aisle: 2820mm
Guard height: 2290mm
Front overhang: 590mm
Travel, loaded: 21km/h
Lift, loaded: 340mm/s
Grade, reference: 36 %
Length without forks: 3070mm
Listed wheel width: 1600mm
Front tyre reference: 14-17.5-14PR
Rear: 10.0/75-15.3-12PR
Wheelbase: 1880mm
tread: 1250/1190mm
Vehicle mass: 5600kg
Battery reference: 12/120V/Ah
Engine rated output: 45/2500 kw/r.p.m
Engine torque: 205/1600-1800 Nm/r.p.m
Bore/stroke: 98*105mm
Cylinders: 4
Nominal displacement: 3.17L
Fuel tank: 60L
Hydraulic pressure: 18.5Mpa
Frame clearance, empty: 245mm
Mast clearance, empty: 265mm
Transmission FWD/RVS: 2/1

Discuss this option ↗

REFERENCE 0303-112

Compact electric pallet truck

Match fork width and entry to the pallet, floor, load and route.

Operation form: Walking style
Load centre: 600mm
Rated load: 1500kg
Vehicle mass: 117kg
Front tyre reference: 140*65mm
Drive tyre reference: 80*60 double wheel mm
fork outer width(mm): 550/685mm
Turning radius: 1353mm
Grade, reference: laden6/unladen20 %
Drive motor: 0.8 Kw
Listed lift measure, datum unconfirmed: 115mm
Travel, loaded/empty: laden4/unladen5km/h

Discuss this option ↗

REFERENCE 0303-113

Industrial walkie pallet truck

Compare the pedestrian layout and battery package with pallet clearances. Conflicting fork-height and speed fields require a current drawing.

Operation form: Walk
Rated load: 2000kg
Load centre: 600mm
Wheelbase: 1260mm
Length(mm): 1690mm
Over Width(mm): 685mm
Fork dimensions: 50*150*1210mm
Fork Outer Width(mm): 550/685mm
Pallet 1000*1200 aisle: 1900mm
Pallet 800*1201 aisle: 1955mm
Turning radius: 1470mm
Vehicle mass: 220kg
Drive tyre reference: 210*70mm
Front tyre reference: 80*60mm
Lift, loaded/empty: 27/40mm/s
Drive motor: 1.0 kw
Lift power(kw): 0.8 kw
Battery reference: 48/32V/Ah
Listed lift measure, datum unconfirmed: 195mm

Discuss this option ↗

REFERENCE 0303-114

Rider/walkie electric stacker

Compare the mast and operator layout for pallet stacking. Approve load capacity at the selected height.

Operation type: Rider/walkie
Rated load: 1400/1600kg
Load centre: 600mm
Vehicle mass: 1080kg
Steering/bearing tyres material: PU
Mast lower height(mm): 2019mm
Lift height: 3000/3300/4000mm
Lowered fork height(mm): 30mm
Length with forks: 1920mm
Overall width: 870mm
Fork dimensions: 1150*185*55mm
Turning radius: 1600mm
Travel, loaded/empty: 4.5/7km/h
Drive motor: 1.5 kw
Lift motor: 2.0 kw
Battery reference: 24/210V/AH
Control system: AC

Discuss this option ↗

REFERENCE 0303-115

Higher-capacity electric pallet truck

Confirm the fork length and lowered-height drawing before choosing the pallet interface.

Rated load: 2000/2500kg
Vehicle mass: 640kg
Length with forks: 1710mm
Ocerall forks width(mm): 540/600/685mm
Pallet 1000*1200 aisle: 1900mm
Pallet 800*1200 aisle: 2100mm
Turning radius: 1700mm
Travel, loaded/empty: 6/6km/h
Grade, loaded/empty: 5/7 %
Battery reference: 24/210V/AH

Discuss this option ↗

REFERENCE 0303-116

Rider electric stacker

Assess the operator platform, safety functions and actual mast/load chart.

Parameter / Driving Mode: Electric
Parameter / Operation Form: Standing
Rated load: 1500kg
Load centre: 600mm
Vehicle mass: 560kg
Wheel / Steering/Bearing Tyres Material: PU
Mast, lowered: 2090/1840/2090/2240/2340mm
Lift height: 1600/2500/3000mm
Mast, extended: 2090/3060/3560/3860/4050mm
Fork Width: 300-695mm
Turning radius: 1440mm
Overall width: 800mm
Pallet 1000×1200 aisle: 2298mm
Pallet 800×1200 aisle: 2248mm
Travel, loaded/empty: 4.3/4.5km/h
Drive motor: 0.65kW
Lift motor: 2.2kW

Discuss this option ↗

REFERENCE 0303-117

Electric reach truck

Confirm residual capacity at height, racking layout, tyre/floor and battery handling requirements.

Parameter / Drive Mode: Electric
Parameter / Driving Mode: Sit-down Operation
Rated load: 2000kg
Load centre: 600mm
Front overhang: 377mm
Wheelbase: 1510mm
Vehicle mass: 4205kg
Wheel / Wheel Material: Polyurethane wheels
Wheel / Front Wheel Size: 343×140mm
Wheel / Rear Wheel Size: 340×114mm
Rear tread: 1146mm
Mast tilt F/R: 2/4 °
Mast, lowered: 3390mm
Free lift: 2700mm
Lift height: 8000mm
Mast, extended: 8940mm
Guard height: 2210mm
Standing Height: 1000mm
Leg Height: 360mm
Overall Length: 2466mm
Overall width: 1270/1260mm
Fork dimensions: 40×120×1070mm
Fork Carriage Width: 928mm
Fork spread: 708mm
Inner Spacing of Legs: 900mm
Forward Travel Distance: 600mm
Mast clearance: 70mm
clearance: 80mm
Pallet 1000*1200 aisle: 2849mm
Pallet 800*1200 aisle: 2899mm
Vehicle Length: 1960mm
Turning radius: 1783mm
Travel, empty/loaded: 10/11km/h
Lift, empty/loaded: 0.29/0.45m/s
Performance / Lowering Speed, Loaded/Unloaded: 0.5/0.5m/s
Performance / Forward Speed, Loaded/Unloading: 0.12/0.12m/s
Grade, empty/loaded: 10/10 °
Drive motor: 6.5kW
Lift motor: 8.2kW
Battery reference: 48/500V/Ah
Operating pressure: 160bar
Battery mass (±5%): 870kg

Discuss this option ↗

REFERENCE 0303-118

Equipment spare-parts coordination

Send the exact equipment model, serial number, drawing or photograph and required quantity. Confirm interchangeability instead of ordering by appearance.

Range: Generator, pump, washer, engine and handling-equipment parts enquiry
Required evidence: Current part number, revision and compatibility confirmation

Discuss this option ↗

REFERENCE 0303-119

110 V recoil gasoline generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2000W
AC maximum power: 2200W
AC voltage: 110V
AC current: 18.2A
Frequency: 60Hz
Engine construction: Single cylinder, Four stroke
Nominal displacement: 163cc
Engine maximum output: 5.5HP
Fuel: Gasoline
Fuel tank: 15L
Starting options: Recoil start
Listed dimensions: 605*430*440mm
Gross mass: 36Kg

Discuss this option ↗

REFERENCE 0303-120

Larger-tank 2 kW gasoline frame

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2000W
AC maximum power: 2200W
AC voltage: 220V
AC current: 9.1A
Frequency: 50Hz
Engine construction: Single Cylinder, 4-Stroke
Nominal displacement: 163cc
Engine maximum output: 5.5HP
Engine / Fuel: Gasoline
Fuel tank: 15L
Starting options: Recoil/Electric
Listed dimensions: 605*430*440mm
Gross mass: 36kg

Discuss this option ↗

REFERENCE 0303-121

Short-frame 2 kW gasoline construction

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2000W
AC maximum power: 2200W
AC voltage: 220V
AC current: 9.1A
Frequency: 50Hz
Engine construction: Single cylinder, Four stroke
Nominal displacement: 163cc
Engine maximum output: 5.5HP
Fuel: Gasoline
Fuel tank: 14L
Starting options: Recoil start
Listed dimensions: 540*430*440mm
Gross mass: 36Kg

Discuss this option ↗

REFERENCE 0303-122

196 cc 2.5 kW gasoline construction

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2500W
AC maximum power: 2700W
AC voltage: 220V/110V
AC current: 11.4A
Speed: 3000 RPM
Frequency: 50Hz/60Hz
Engine construction: Single cylinder, 4-stroke
Nominal displacement: 196cc
Engine maximum output: 6.5HP
Fuel: Gasoline/Petrol
Fuel tank: 15L
Listed dimensions: 605*430*430MM
Gross mass: 38.00KGS

Discuss this option ↗

REFERENCE 0303-123

Alternative-voltage 2.5 kW gasoline frame

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2500W
AC maximum power: 2700W
AC voltage: 220V/380V
AC current: 11.4A
Frequency: 50Hz/60Hz
Engine construction: Single cylinder, 4-stroke
Nominal displacement: 196cc
Engine maximum output: 6.5HP
Fuel: Gasoline
Fuel tank: 15L
Starting options: Recoil/electric
Listed dimensions: 605*430*440mm
Gross mass: 38KG

Discuss this option ↗

REFERENCE 0303-124

15-litre 2.8 kW gasoline construction

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2800W
AC maximum power: 3000W
Frequency: 50Hz
AC voltage: 220V
AC current: 12.7A
Power factor: 1.0
Engine construction: Single Cylinder, Four Stroke
Engine maximum output: 7.0HP
Nominal displacement: 212cc
Fuel: Unleaded Gasoline
Fuel tank: 15L
Starting options: Manual Start/Electric Start
Listed dimensions: 610*485*475mm
Net mass: 37.5Kg

Discuss this option ↗

REFERENCE 0303-125

Alternative-panel 2.8 kW gasoline frame

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2800W
AC maximum power: 3000W
AC voltage: 220V/380V
AC current: 12.7A/4.3A
Frequency: 50Hz
Engine construction: Single cylinder, 4-stroke
Nominal displacement: 212cc
Engine maximum output: 7.0HP
Fuel: Gasoline
Fuel tank: 15L
Starting options: Recoil/Electric
Listed dimensions: 605*445*490mm
Gross mass: 39KG

Discuss this option ↗

REFERENCE 0303-126

Dual-voltage 2.8 kW gasoline version

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 2800W
AC maximum power: 3000W
AC voltage: 220V/110V
AC current: 12.7A
Frequency: 50Hz
Engine construction: Single Cylinder, 4-Stroke
Nominal displacement: 212cc
Engine maximum output: 7.0HP
Engine / Fuel: Gasoline
Fuel tank: 15L
Starting options: Recoil/Electric
Listed dimensions: 605*445*490mm
Gross mass: 39KG

Discuss this option ↗

REFERENCE 0303-127

5 kW gasoline generator with smaller peak margin

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 5000W
AC maximum power: 5200W
AC voltage: 220V
AC current: 22.7A
Frequency: 50Hz
Engine construction: Single cylinder, 4-Stroke
Nominal displacement: 389cc
Engine maximum output: 13.0HP
Engine / Fuel: Gasoline
Fuel tank: 25L
Starting options: Recoil/electric start
Listed dimensions: 680×520×540mm

Discuss this option ↗

REFERENCE 0303-128

5 kW gasoline generator with larger peak margin

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

AC rated power: 5000W
AC maximum power: 5500W
AC voltage: 220V
AC current: 22.7A
Frequency: 50Hz
Engine construction: Single cylinder, 4-stroke
Nominal displacement: 389cc
Engine maximum output: 13.0HP
Fuel: Gasoline
Fuel tank: 25L
Starting options: Recoil/Electric
Listed dimensions: 680*520*540mm
Gross mass: 80KG

Discuss this option ↗

REFERENCE 0303-129

Twin-cylinder high-output gasoline generator

Compare the exact power version, starting method, outlet panel, load demand and packed dimensions. Output alternatives are separate configurations; confirm the current electrical schedule.

Generation layout: single-phase
Frequency: 50Hz
AC voltage: 220/380V
AC rated power: 15 Kw
AC maximum power: 16.5 Kw
Power factor: 1/0.8
Waveform reference (%): ≤3 %
Overload-control reference: Overload protection control
Engine construction: V-shaped double cylinder，Four stroke，Forced air cooling，Overhead valve
Nominal displacement: 999 cc
Fuel: Over 92#
Oil quantity (unit unstated): 2.3
Starting options: Electric start
Listed dimensions: 1050*715*670mm
Net mass: 223kg

Discuss this option ↗

REFERENCE 0303-130

Large twin-cylinder gasoline configurations

Match the three columns by engine and alternator; the additional operating-power label is not treated as another continuous rating.

Configurations: A; B; C
Engine construction: Air cooling, V-shaped double cylinder, Four stroke, OHV90°
Bore/stroke: 80mm*71mm; 82mm*72mm; 90mm*78.5mm
Nominal displacement: 713cc; 760cc; 999cc
Oil quantity: 1.6L; 1.6L; 2.3L
Ignition system: TCI
Starting options: Electric start/ Button start
Frequency: 50HZ
AC voltage: 230V/400V
AC rated power: 9.9kw; 11.7kw; 15.3kw
AC operating power: 11kw; 13kw; 17kw
AC maximum power: 12kw; 14kw; 19kw
Fuel tank: 40L; 40L; 65L
Size: 796*598*923mm; 835*640*950mm; 910*673*1078mm
Net mass: 160kg; 200kg; 235kg
Engine output reference: 13.5kw/3000rpm; 16kw/3000rpm; 20kw/3000rpm

Discuss this option ↗

REFERENCE 0303-131

3-tonne lithium counterbalance forklift

Approve the mast, battery/charger, fork and tyre arrangement with the load chart.

General / Power Type: Battery
Rated load: 3000kg
Load centre: 500mm
Lift height: 3000mm
Free lift: 130mm
Fork dimensions: 1070*125*45mm
Fork spread: 300/1200mm
Mast tilt F/R: 6/12deg
Front overhang: 490mm
Length without forks: 2680mm
Length with forks: 3750mm
Listed wheel width: 1225mm
Mast, lowered: 2095mm
Mast, extended: 4180mm
Guard height: 2130mm
Turning radius: 2460mm
Right-angle aisle: 2105mm
Travel, empty/loaded: 18km/h
Lift, empty/loaded: 300mm/s
Vehicle mass: 4300kg
Grade, reference: 15/15 %
Front tyre reference: 28*9-15-12PR
Rear tyre reference: 6.50-10-10PR
Front tread: 1000mm
Rear tread: 970mm
Wheelbase: 1700mm
Mast clearance, empty/loaded: 152/132mm
Frame clearance, empty/loaded: 158/138mm
Drive motor: 16kW
Lift motor: 13kW
Hydraulic pressure: 17.5mpa
Battery reference: 80V/350Ah

Discuss this option ↗

REFERENCE 0303-132

Additional small gasoline electrical configurations

Specify the intended continuous output, phase, current and engine. A current signed schedule is required for this separately listed range.

Configurations: A; B; C
AC rated power: 2000W; —; 2800W
AC maximum power: 2200W; 2700W; 3000W
AC voltage: 220V/110V
AC current: 9.1A; 11.4A; 12.7A
Frequency: 50Hz/60Hz
Engine construction: Single cylinder, 4-stroke
Nominal displacement: 163cc; 196cc; 208cc
Engine maximum output: 5.5HP; 6.5HP; 7.0HP
Fuel: Gasoline
Fuel tank: 15L
Starting options: Recoil/Electric
Mass, net/gross unconfirmed: 35KGS; 36KGS; 36KGS
Listed dimensions: 605×430×430MM

Discuss this option ↗

These are separate published product references, subject to a current confirmed configuration. Rated/continuous and maximum/short-time output are different; kW and kVA are not interchangeable. Voltage, phase and frequency options require a matched alternator/panel schedule. Pump flow, head and suction are not simultaneous maxima. Forklift capacity requires its exact load centre, mast and residual-capacity chart. Commercial and compliance terms are confirmed for the selected article. A/B/C configurations follow actual columns within that card only; each semicolon position belongs to that configuration, while a shared value applies across the listed columns. A dash means missing or withheld data. Slash values retain their source grouping and are not an approved combination across voltage, frequency, engine or phase. All figures are catalogue references; nominal displacements and unit pairs are not exact conversions or measurements. Missing units remain unstated. Conflicting electrical, pressure, engine and geometry blocks are withheld. Obtain current signed data, complete electrical nameplates, pump curves and selected load charts. Optional features require a current build list. Platform or fork lift measures require their drawing datum; grade references do not define a safe working slope.

What matters for this category

A better brief.
A clearer comparison.

Focus the sourcing conversation on the features, materials and production details that make a difference to your product range.

Keep each power configuration traceable

We coordinate comparisons of rated output, peak definition, frequency, voltage, phase, engine, starter and tank. This helps avoid combining attractive figures from different versions.

Match equipment to its actual task

Discuss the generator load profile, pump duty point, cleaning pressure/flow or handling load and route. Where a field is unclear, request the current technical schedule before selection.

Coordinate mixed equipment procurement

A project can include generation, water movement, cleaning, engines, handling equipment and corresponding parts. Inspection and transport plans remain specific to each article.

Branding, configuration & packaging

Make the product
fit your programme.

Bring artwork, reference samples and a target cost. The available process, minimum quantity, sample charges and development scope are reviewed for the chosen option.

Electrical and mechanical interfaces

Submit voltage, frequency, phase, outlet panel, starter, alternator and control needs, or shaft/mounting and hose/pump interfaces. Optional combinations require engineering approval.

Handling and duty options

Specify capacity, load centre, mast, forks, tyre, fuel/battery, charging and site requirements. Environmental and engine-emission claims require the exact selected configuration.

Labels, packaging and evaluation

Discuss agreed markings, artwork, colour, pack format, documentation language and an evaluation-unit plan. MOQ, sample costs, production timing, warranty and parts terms are confirmed in writing.

Quality & product evidence

Turn requirements
into checks.

Agree which product characteristics need testing and how the approved sample relates to the bulk order.

Configuration and incoming-part checks

Agree identification, dimensions, materials and critical component checks against approved drawings. Do not substitute a similar-looking engine, controller, alternator or battery.

Task-specific performance inspection

Define generation load and electrical checks, pump duty measurements, washer test conditions or handling/braking/lifting checks as appropriate. Set methods and acceptance criteria in advance.

Pre-shipment verification

Request inspection records, identification photographs, packing checks and agreed operating instructions. Source production/QC descriptions do not establish a blanket certification or a universal inspection rate for this service.

Test capability is a starting point for the inspection plan. Request the method, applicable model and results needed for your order.

Documents matched to the order

Ask for evidence
that fits the product.

Documents and suitability are checked at article level. We act as an independent sourcing service; source-factory certificates, facilities and service networks are not credentials or assets of this website.

State the sales market, intended users and required files in your first enquiry. Current validity and scope are checked for the selected supplier and product; a category description does not certify every item.

Share your document requirements ↗

Confirmed article specification: Request a current dated technical sheet, dimensional drawing, electrical schedule, rating definitions, relevant curve or capacity chart and approved configuration list.
Destination compliance and manuals: State the destination and application; request relevant declarations, current reports, engine/emission documents, battery/charger records and operation/maintenance instructions for the exact article.
Packing, inspection and after-sales scope: Agree packing lists, dimensions/weights, loading restraint, inspection records, spare-parts identification and written service/warranty terms. Batteries and fuel systems need transport-specific preparation.

Built around how you sell

Different buyers.
Different specifications.

Your sales channel changes the assortment, packaging and quality priorities. Tell us the intended use as well as the product name.

Site and backup power projects

Compare the load and start-up demand, electrical arrangement, ventilation, operating location and required documentation before selecting a generating set.

Water movement and cleaning

Supply water condition, duty point, suction and hose details, or cleaning target, water supply, nozzle and operating duty.

Warehousing and outdoor material movement

Share pallet/load geometry, required lift and reach, floor, slopes, aisles, working environment and power/fuel constraints.

From first brief to a defined order

One contact.
A practical next step.

Samples, commercial terms and responsibilities are agreed for the project. Use the same product and packing specification when comparing quotations.

Share the requirement

Product, reference image, quantity, sales market and timing.

Compare suitable options

Review configuration, materials, sample scope and relevant documents.

Approve the specification

Agree artwork, packaging, sample, testing and inspection criteria.

Confirm the order plan

Set price, payment, production, delivery and defect remedies in writing.

Buyer questions

Before you send
your first enquiry.

Practical answers about this sourcing direction, customization and the reference options. Your agreed specification and written quotation determine the actual order.

Which product lines can I include?

Gasoline, diesel and inverter generators, generation/welding packages, independent engines, engine-powered pumps, pressure washers, battery wash guns, forklifts, pallet/stacking/reach equipment and compatible-parts enquiries.

Can I compare several generator output options?

Yes. State continuous load, starting demand, voltage, phase, frequency, sockets, operating duty and start/control requirements. Each output and engine combination needs a confirmed schedule.

Are rated power, maximum power and kVA the same?

No. Rated or continuous output and short-time maximum output have different duties. Apparent power in kVA also needs power factor and phase data; do not treat a heading as a complete electrical rating.

What information is needed for a water pump?

Provide liquid condition, required flow at head, suction lift, hoses, duty and fuel choice. Request the current pump curve; separately published flow, head and suction figures do not guarantee one operating point.

How should I specify a pressure washer?

Give the cleaning task, water supply, pressure/flow at the operating point, nozzle, hose, duty and preferred power type. Confirm the same pressure units and test conditions across the quotation.

Can I choose a forklift by nominal capacity alone?

Capacity is a starting point. Load centre, load dimensions, mast, lift height, attachments, route and floor determine the approved configuration and residual capacity. Fuel and battery packages also need separate confirmation.

Can I request branding, samples and export packing?

We can coordinate those requests. The selected article, drawings, artwork, pack plan, evaluation cost, quantity, current lead time and written service terms must be agreed; no fixed terms are assumed here.

What should I send for a mixed equipment quotation?

List each task and quantity, destination, current technical requirements, power or fuel preference and inspection/document needs. Attach drawings or photographs and identify exact models/serials for replacement parts.

Who handles my enquiry?

Factory Sourcing Hub handles this enquiry as an independent sourcing and trading service. The product route, supplier suitability, sample scope and order responsibilities are agreed for the actual project.

How do I get a price and order minimum?

Send the product reference, quantities per variation, customization and packaging. Prices, minimums, sample charges and delivery dates are confirmed in a current quotation; the page is not a live inventory or price feed.

Can I discuss samples and inspection before ordering?

Yes. State whether you need a reference sample, a customized sample or development work. Agree the sample cost and shipping, approval specification, inspection plan and remedy for non-conforming goods before the bulk order.

What should I attach to my email?

Reference images, drawings, logo artwork and a product list are useful. Include quantities, the intended users and sales market, packaging, required documents and timing. After submitting the form, email attachments to kunhuow@gmail.com with your enquiry reference.

Tell us what you are planning

Your next order
starts with a brief.

A reference picture or a short description is enough to begin. Add the details you already know; the optional fields help make the follow-up more useful.

Equipment list, task, quantity and destination
Rated duty, load/interface and current technical drawings
Power/fuel, electrical or fluid configuration and environment
Inspection, documents, evaluation, packing and written after-sales scope

kunhuow@gmail.com

Download the enquiry checklist ↓

Independent sourcing and trading service. Supplier choice, service costs and order conditions are discussed for your project.

Discuss your requirements.

Product selection, customization, samples and quotation enquiries.

Your work email *

Tell us what you need *

Add product, quantity or customization details (optional)

Product / sourcing direction

Quantity & variation splits

Sales market / users

Logo / customization

Packaging / labels

Samples / tests / documents

Budget / timing / shipping basis

Submit your enquiry directly. We use your details to respond to your sourcing request. For attachments, email kunhuow@gmail.com with your enquiry reference. Enquiry data use.

Information basis: published product information reviewed 01 November 2026. Reference details support a sourcing discussion. Current supply, samples and product-specific documents are confirmed for the selected item.

Generators, Water Pumps, Pressure Washers & Forklift Sourcing

Build the rangeyour buyers need.

Gasoline generators

Gasoline inverter generators

Diesel generation

Generation and welding

Independent engines

Powered water pumps

Engine-powered pressure washers

Electric and battery cleaning

Lithium forklifts

Internal-combustion forklifts

Warehouse trucks

Spare parts and configuration support

Start with a product.Define the details.

Compact two-stroke gasoline generator

Alternative small gasoline generator

Small recoil gasoline generator

Single-cylinder portable gasoline generator

Open-frame 2 kW gasoline generator

Configurable small gasoline range

Alternative-panel gasoline range

Single-cylinder recoil gasoline range

Compact dual-start gasoline version

Alternative 2.5 kW gasoline version

Tubular-frame gasoline transport version

Recoil/electric 2.8 kW gasoline version

Wheeled gasoline generator

Portable 3 kW gasoline range

Alternative-frame 3 kW gasoline version

Larger open-frame gasoline generator

6 kW gasoline generator

7 kW gasoline configurations

9 kW gasoline generator

Additional portable gasoline frame

Compact 1 kW inverter generator

Alternative-voltage compact inverter

Compact 2 kW inverter generator

Wheeled compact inverter generator

2 kW inverter with larger output margin

2.5 kW inverter generator

Compact enclosed 3 kW inverter

Open-layout 3 kW inverter

Alternative housing 3 kW inverter

3.5 kW inverter generator

Additional portable inverter construction

4 kW inverter generator

Open-frame multi-output inverter family

5 kW open-frame inverter

Compact higher-output inverter range

Alternative compact inverter housing

9 kW enclosed inverter

High-output inverter frame family

Alternative 7–9 kW inverter frame family

9–11 kW inverter configurations

Large single-cylinder inverter version

Inverter generator and welding package

Compact generation/welding construction

Small air-cooled diesel generator

Enclosed diesel generator configurations

Economy open diesel generator

Alternative open diesel generator

8 kW diesel generator

Diesel generator with electric start and transfer-system enquiry

Enclosed diesel frequency/voltage builds — configuration A

Enclosed diesel frequency/voltage builds — configuration B

Enclosed diesel frequency/voltage builds — configuration C

Single/three-phase enclosed diesel set

Larger enclosed diesel reference

Heavy enclosed diesel reference

Twin-cylinder diesel and transfer-system enquiry

Diesel inverter generator range

Small single-cylinder gasoline engines

Larger single-cylinder gasoline engine

Twin-cylinder gasoline power unit

Vertical single-cylinder diesel engine

50 mm gasoline pump

80 mm gasoline pump

100 mm gasoline pump

150 mm gasoline pump

Build the range
your buyers need.

Start with a product.
Define the details.

A better brief.
A clearer comparison.