Internal-combustion counterbalance
Standard and updated IC families, gasoline/LPG direction, cushion-tyre construction and separate 4.5–5-tonne and 5–10-tonne diesel series.
Enquire about this range ↗COUNTERBALANCE · REACH · ROUGH TERRAIN · STACKERS · PALLET TRUCKS
Compare forklift and warehouse-truck configurations Fuel, battery, mast, tyres and pallet requirements
Diesel, LPG, Battery, Rough-Terrain & Warehouse-Truck Sourcing
Independent sourcing across IC and battery counterbalance forklifts, cushion-tyre and rough-terrain constructions, reach trucks, electric stackers, powered/manual pallet trucks, spare parts and application-specific attachments. Match each current configuration to its load, site and destination.
- Compare diesel, gasoline/LPG, lithium/LFP and lead-acid constructions
- Separate rated load, load centre, mast and battery options
- Coordinate current specifications, samples/inspection, parts and packing
Manufacturing, product documents and order conditions depend on the model and supply route selected for your project.
Start with a product reference, intended use and estimated quantity. We bring product selection, sample questions and quotation details into one conversation.
Email your reference image ↗RangeCounterbalance, reach, rough terrain and warehouse handling
Power choicesIC, lithium/LFP, lead-acid and manual by article
Mast reviewCapacity, load centre, height and residual-load chart
Order basisCurrent configuration, technical offer and written terms
Explore the product range
Build the range
your buyers need.
Choose a focused product or discuss a coordinated assortment. Each direction can be developed into a more specific model and packaging brief.
Lithium and LFP forklifts
High-voltage LFP, general lithium, compact three-wheel lithium and heavier LFP configurations with separate battery/charger approval.
Enquire about this range ↗Lead-acid warehouse and counterbalance
Reach-truck, counterbalance and compact three-wheel directions retained as distinct battery and mast constructions.
Enquire about this range ↗Rough-terrain handling
Diesel 2WD/4WD directions evaluated against ground, tyre, load, engine and operating-chart requirements.
Enquire about this range ↗Warehouse stackers and pallet transport
Walkie and walkie/stand-on stackers, low-level electric pallet trucks and manual pallet trucks specified by pallet and route.
Enquire about this range ↗Parts and attachment requests
Exact spare-part references, packing/identification and task-specific attachment briefs with host-truck compatibility review.
Enquire about this range ↗Reference product directions
Start with a product.
Define the details.
Use these options to describe what you are buying. The public references identify your enquiry; the final model and specification are confirmed before an order.
REFERENCE 0297-01
Diesel counterbalance range
Compare the current diesel configuration, load centre, mast, tyre and engine brief. Capacity options are separate model columns, not a guarantee at every height.
- Configuration order
- A;B;C;D;E;F;G
- Load capacity
- 1500kg;1750kg;2000kg;2500kg;3000kg;3500kg;4000kg
- Load center
- 500mm
- Power unit
- Diesel
- Tire / Front
- 6.50-10-10PR;6.50-10-10PR;7.00-12-12PR;7.00-12-12PR;28×9-15-12PR;28×9-15-12PR;250-15-16PR
- Tire / Rear
- 5.00-8-10PR;5.00-8-10PR;6.00-9-10PR;6.00-9-10PR;6.50-10-10PR;6.50-10-10PR;6.50-10-10PR
- Max.lifting height
- 3000mm
- Fork size L ×W ×T
- 920x100x35mm;920x100x35mm;1070x122x40mm;1070x122x40mm;1070x125x45mm;1070x125x50mm;1070x150x50mm
- Overall length(without fork)
- 2251mm;2281mm;2460mm;2530mm;2705mm;2760mm;2870mm
- Total width
- 1070mm;1070mm;1150mm;1150mm;1225mm;1285mm;1345mm
- Mast height（fork lowering）
- 1995mm;1995mm;1995mm;1995mm;2075mm;2075mm;2075mm
- Height of head guard
- 2060mm;2060mm;2120mm;2120mm;2140mm;2140mm;2140mm
- Weight
- 2550kg;2780kg;3330kg;3670kg;4380kg;4780kg;5100kg
- Speed / Travelling / Full load
- 14km/h;14km/h;17km/h;17km/h;18km/h;18km/h;16.5km/h
- Speed / Lifting / Full load
- 440mm/s;410mm/s;550mm/s;550mm/s;450mm/s;450mm/s;380mm/s
- Speed / Lowering / Full load
- 370mm/s;350mm/s;450mm/s;450mm/s;450mm/s;450mm/s;450mm/s
- Grade test reference at 1.6km/h / Full load/No load
- 21/18%;18/16%;27/20%;23/18%;18/20%;18/20%;18/20%
- Engine / Rated power
- 35.4/2500KW/rpm;35.4/2500KW/rpm;35.4/2500KW/rpm;36.8/2500KW/rpm;35.4/2500KW/rpm;35/2450KW/rpm;36.8/2500KW/rpm
- Engine / Rated torque
- 139.9/1800N·m/rpm;139.9/1800N·m/rpm;139.9/1800N·m/rpm;156/1700-1900N·m/rpm;139.9/1800N·m/rpm;170/1700N·m/rpm;174/1800-2000N·m/rpm
- Engine / Number of cylinders
- 4
- Engine / Displacement
- 2.369L;2.369L;2.369L;2.670L;2.369L;3.059L;2.98L
- Fuel tank capacity
- 50L;50L;70L;70L;70L;Unconfirmed;70L
- Transmission / Shift stage(front/rear-type)
- 1-1Power shift T/M
REFERENCE 0297-02
Gasoline/LPG counterbalance range
Evaluate the fuel arrangement, operating environment, exhaust requirements, mast and load handling. Confirm the actual gasoline/LPG configuration and destination engine documents.
- Configuration order
- A;B;C;D;E;F;G
- Load capacity
- 1500kg;1750kg;2000kg;2500kg;3000kg;3500kg;4000kg
- Load center
- 500mm
- Power unit
- Gasoline/LPG
- Tire / Front
- 6.50-10-10PR;6.50-10-10PR;7.00-12-12PR;7.00-12-12PR;28×9-15-12PR;28×9-15-12PR;250-15-16PR
- Tire / Rear
- 5.00-8-10PR;5.00-8-10PR;6.00-9-10PR;6.00-9-10PR;6.50-10-10PR;6.50-10-10PR;6.50-10-10PR
- Max.lifting height
- 3000mm
- Overall length(without fork)
- 2245mm;2275mm;2460mm;2530mm;2705mm;2760mm;2870mm
- Total width
- 1070mm;1070mm;1150mm;1150mm;1225mm;1285mm;1345mm
- Mast height（fork lowering）
- 1995mm;1995mm;1995mm;1995mm;2075mm;2075mm;2075mm
- Height of head guard
- 2060mm;2060mm;2120mm;2120mm;2140mm;2140mm;2140mm
- Weight
- 2550kg;2780kg;3240kg;3580kg;4300kg;4700kg;5100kg
- Speed / Travelling / Full load
- 14km/h;14km/h;17km/h;17km/h;18km/h;18km/h;16.5km/h
- Speed / Lifting / Full load
- 450mm/s;420mm/s;550mm/s;550mm/s;450mm/s;450mm/s;380mm/s
- Speed / Lowering / Full load
- 370mm/s;350mm/s;450mm/s;450mm/s;450mm/s;450mm/s;450mm/s
- Grade test reference at 1.6km/h / Full load/No load
- 20/18%;18/17%;25/20%;22/18%;17/20%;17/20%;18/20%
- Engine / Rated power
- 31.2/2250KW/rpm;31.2/2250KW/rpm;31.2/2250KW/rpm;31.2/2250KW/rpm;31.2/2250KW/rpm;37.4/2300KW/rpm;37.4/2300KW/rpm
- Engine / Rated torque
- 144/1600N·m/rpm;144/1600N·m/rpm;144/1600N·m/rpm;144/1600N·m/rpm;144/1600N·m/rpm;177/1600N·m/rpm;177/1600N·m/rpm
- Engine / Number of cylinders
- 4
- Fuel tank capacity
- 50L;50L;70L;70L;70L;70L;70L
- Transmission / Shift stage(front/rear-type)
- 1-1Power shift T/M
- Fork size L ×W ×T
- Unconfirmed;Unconfirmed;1070x122x40mm;1070x122x40mm;1070x125x45mm;1070x125x50mm;1070x150x50mm
- Engine / Displacement
- Unconfirmed;Unconfirmed;Unconfirmed;Unconfirmed;Unconfirmed;2.488L;2.488L
REFERENCE 0297-03
Cushion-tyre IC forklift
Compare the cushion-tyre construction with the required floor, turning and handling task. Fuel directions in the table require exact current configuration approval.
- Configuration order
- A;B;C
- Load capacity
- 2000kg;2500kg;2500kg
- Load center
- 500mm
- Power unit
- Diesel/Gasoline/LPG
- Tire type / Front/Rear
- Cushion Tires
- Wheels / Front/Rear
- 2/2
- Max.lifting height
- 3000mm
- Fork size L ×W ×T
- 1070x122x40mm
- Overall length(without fork)
- 2278mm;2328mm;2328mm
- Total width
- 1174mm
- Mast height（fork lowering）
- 2006mm
- Height of head guard
- 2035mm
- Weight
- 3445kg;3795kg;3795kg
- Speed / Travelling / Full load
- 17.5km/h
- Speed / Lifting / Full load
- 550mm/s
- Speed / Lowering / Full load
- 450mm/s
- Wheelbase
- 1400mm
- Engine / Rated power
- 31.2/2250KW/rpm;37.4/2300KW/rpm;34.3/2500KW/rpm
- Engine / Rated torque
- 144/1600N·m/rpm;177/1600N·m/rpm;138/1800N·m/rpm
- Engine / Number of cylinders
- 4
- Engine / Displacement
- 2.065L;2.488L;2.369L
- Fuel tank capacity
- 50L
- Transmission
- Hydralic Torque Transmission
REFERENCE 0297-04
4.5–5-tonne diesel configurations
Review the three separate capacity/load-centre combinations and appropriate forks. A nominal 5-tonne label alone does not define the truck or residual capacity.
- Configuration order
- A;B;C
- Load capacity
- 4500kg;5000kg;5000kg
- Load center
- 600mm;500mm;600mm
- Power unit
- Diesel
- Tire / Front
- 300-15-18PR
- Tire / Rear
- 7.00-12-12PR
- Max.lifting height
- 3000mm
- Fork size L ×W ×T
- 1220x150x50mm;1070x150x50mm;1220x150x60mm
- Overall length(without fork)
- 3183mm;3183mm;3422mm
- Total width
- 1485mm
- Mast height（fork lowering）
- 2300mm;2300mm;2360mm
- Height of head guard
- 2420 (standard); 2270 (container type in optional) mm
- Weight
- 7483kg;7483kg;7530kg
- Speed / Travelling / Full load
- 17km/h
- Speed / Lifting / Full load
- 420mm/s;420mm/s;440mm/s
- Speed / Lowering / Full load
- 500mm/s;500mm/s;525mm/s
- Grade test reference at 1.6km/h / Full load/No load
- 15%
- Engine / Rated power
- 60/2200KW/rpm;52/2300KW/rpm;52/2300KW/rpm
- Engine / Number of cylinders
- 4;6;6
- Engine / Displacement
- 3.5L;4.996L;4.996L
- Fuel tank capacity
- 80L
- Transmission / Shift stage(front/rear-type)
- 1-1Power shift T/M
- Engine / Rated torque
- Unconfirmed;248/1700N·m/rpm;248/1700N·m/rpm
REFERENCE 0297-05
5–10-tonne diesel range
Set load dimensions, centre of gravity, fork, mast, terrain and duty requirements. Confirm the current capacity chart and transport configuration for each selected size.
- Configuration order
- A;B;C;D;E;F;G;H;I;J
- Load capacity
- 5000kg;5000kg;6000kg;6000kg;7000kg;7000kg;8000kg;8000kg;10000kg;10000kg
- Load center
- 500mm;500mm;600mm;600mm;600mm;600mm;600mm;600mm;600mm;600mm
- Power unit
- Diesel
- Tire / Front
- 8.25×15-14PR;8.25×15-14PR;8.25×15-14PR;8.25×15-14PR;8.25×15-14PR;8.25×15-14PR;8.25×15-14PR;8.25×15-14PR;9.00×20-14PR;9.00×20-14PR
- Tire / Rear
- 8.25×15-14PR;8.25×15-14PR;8.25×15-14PR;8.25×15-14PR;8.25×15-14PR;8.25×15-14PR;8.25×15-14PR;8.25×15-14PR;9.00×20-14PR;9.00×20-14PR
- Max.lifting height
- 3000mm
- Fork size L ×W ×T
- 1220x150x60mm;1220x150x60mm;1220x150x60mm;1220x150x60mm;1220x150x65mm;1220x150x65mm;1220x170x75mm;1220x170x75mm;1220x175x80mm;1220x175x80mm
- Overall length(without fork)
- 3455mm;3455mm;3530mm;3530mm;3590mm;3590mm;3740mm;3740mm;4255mm;4255mm
- Total width
- 1995mm;1995mm;1995mm;1995mm;1995mm;1995mm;1995mm;1995mm;2245mm;2245mm
- Mast height（fork lowering）
- 2500mm;2500mm;2500mm;2500mm;2500mm;2500mm;2625mm;2625mm;2850mm;2850mm
- Height of head guard
- 2450mm;2450mm;2450mm;2450mm;2450mm;2450mm;2450mm;2450mm;2560mm;2560mm
- Weight
- 8050kg;8050kg;8750kg;8750kg;9450kg;9450kg;10450kg;10450kg;12450kg;12450kg
- Speed / Travelling / Full load
- 26km/h;26km/h;26km/h;26km/h;26km/h;26km/h;26km/h;26km/h;24km/h;24km/h
- Speed / Lifting / Full load
- 500mm/s;500mm/s;500mm/s;500mm/s;450mm/s;450mm/s;450mm/s;450mm/s;390mm/s;390mm/s
- Speed / Lowering / Full load
- 450mm/s;450mm/s;450mm/s;450mm/s;450mm/s;450mm/s;450mm/s;450mm/s;470mm/s;470mm/s
- Grade test reference at 1.6km/h / Full load
- 37%;37%;33%;33%;29%;29%;24%;24%;22%;22%
- Engine / Rated power
- 82.3/2000KW/rpm;85/2200KW/rpm;82.3/2000KW/rpm;85/2200KW/rpm;82.3/2000KW/rpm;85/2200KW/rpm;82.3/2000KW/rpm;85/2200KW/rpm;82.3/2000KW/rpm;85/2200KW/rpm
- Engine / Rated torque
- 418/1500N·m/rpm;450/1650N·m/rpm;418/1500N·m/rpm;450/1650N·m/rpm;418/1500N·m/rpm;450/1650N·m/rpm;418/1500N·m/rpm;450/1650N·m/rpm;418/1500N·m/rpm;450/1650N·m/rpm
- Engine / Number of cylinders
- 6
- Engine / Displacement
- 6.494L;5.785L;6.494L;5.785L;6.494L;5.785L;6.494L;5.785L;6.494L;5.785L
- Fuel tank capacity
- 140L
- Transmission / Shift stage(front/rear-type)
- 2/2 -automatic
REFERENCE 0297-06
High-voltage LFP counterbalance range
Compare lithium-iron-phosphate power with the required duty cycle and charger supply. The table uses a standard mast reference; alternative lift heights require their own current configuration and load chart.
- Configuration order
- A;B;C;D;E
- Load capacity
- 2000kg;2500kg;3000kg;3500kg;4000kg
- Power unit
- Lithium Iron phosphate Battery
- Tire / Number / front/rear
- 2/2
- Tire / Model / Front
- 7.00-12-12PR;7.00-12-12PR;28X9-15-12PR;28X9-15-12PR;250-15-16PR
- Tire / Model / Rear
- 6.00-9-10PR;6.00-9-10PR;6.50-10-10PR;6.50-10-10PR;6.5-10-10PR
- Max.lifting height
- 3000mm
- Fork size L ×W ×T
- 1070X122X40mm;1070X122X40mm;1070X125X45mm;1070X125X50mm;1070X155X50mm
- Overall length(without fork)
- 2460mm;2530mm;2705mm;2760mm;2870mm
- Total width
- 1150mm;1150mm;1225mm;1285mm;1365mm
- Mast height（fork lowering）
- 1995mm;1995mm;2075mm;2075mm;2125mm
- Height of head guard
- 2120mm;2120mm;2140mm;2140mm;2140mm
- Weight（with standard battery）
- 3280kg;3750kg;4265kg;4520kg;4990kg
- Speed / Travelling / Full load
- 20km/h
- Grade test reference / Full load
- 20%
- Battery / Voltage/capacity
- 153.6V/230AH
- Electric motors / Drive motor
- 20KW
- Electric motors / Hydraulic motor
- 20KW
- Control type
- Travelling AC; Lifting AC
- Load center
- Unconfirmed;500mm;500mm;500mm;500mm
REFERENCE 0297-07
Lithium counterbalance family
Assess the required capacity, mast, battery enclosure, charger, tyre and current operational specification. Approve battery chemistry, capacity and charger together for the selected article.
- Configuration order
- A;B;C;D;E;F;G
- Load capacity
- 1500kg;1750kg;2000kg;2500kg;3000kg;3500kg;4000kg
- Load center
- 500mm
- Power unit
- Li-ion Battery
- Tire / Front
- 6.00-9-10-10PR;6.00-9-10-10PR;21X8-9-16PR;21X8-9-16PR;28X9-15-12PR;28X9-15-12PR;250-15-16PR
- Tire / Rear
- 16X6-8-10PR;16X6-8-10PR;18X7-8-14PR;18X7-8-14PR;18X7-8-14PR;18×7-8;18×7-8
- Max.lifting height
- 3000mm
- Fork size L ×W ×T
- 920X100X35mm;920X100X35mm;1070X122X40mm;1070X125X45mm;1070X125X45mm;1070X125X50mm;1070X150X50mm
- Overall length(without fork)
- 1961mm;2061mm;2245mm;2285mm;2510mm;2550mm;2775mm
- Total width
- 1070mm;1070mm;1150mm;1150mm;1225mm;1225mm;1380mm
- Mast height（fork lowering）
- 1995mm;1995mm;1995mm;1995mm;2075mm;2075mm;2150mm
- Height of head guard
- 2100mm;2100mm;2145mm;2145mm;2190mm;2190mm;2425mm
- Weight（with standard battery）
- 2690kg;2990kg;3440kg;3820kg;4660kg;5190kg;5400kg
- Speed / Travelling / Full load
- 14km/h;14km/h;13.5km/h;13.5km/h;13.5km/h;13km/h;12km/h
- Speed / Lifting / Full load
- 350mm/s;350mm/s;240mm/s;240mm/s;240mm/s;220mm/s;220mm/s
- Grade test reference
- 15%;12.5%;12.5%;12.5%;12.5%;12.5%;12.5%
- Battery / Voltage/capacity
- 80V-210AH;80V-210AH;80V-320AH;80V-320AH;80V-420AH;80V-420AH;80V-530AH
- Battery / Weight(with battery box)
- 735Kg;795Kg;825Kg;945Kg;1220Kg;1290Kg;1430Kg
- Electric motors / AC Drive motor
- 8KW;8KW;11KW;11KW;16.6KW;16.6KW;16.6KW
- Electric motors / AC Hydraulic motor
- 10KW;10KW;12KW;12KW;13.5KW;13.5KW;13.5KW
- Control type
- Travelling AC; Lifting AC
- Hydraulic system pressure
- 145kg/cm2;175kg/cm2;175kg/cm2;175kg/cm2;175kg/cm2;175kg/cm2;175kg/cm2
REFERENCE 0297-08
Compact three-wheel lithium family
Compare a compact three-wheel construction against aisle, turning, pallet and stability requirements. Battery details need current confirmation instead of borrowing the similar lead-acid table.
- Configuration order
- A;B;C
- Load capacity
- 1500kg;1750kg;2000kg
- Load center
- 500mm
- Power unit
- Li-ion Battery
- Tire / Front
- 18×7-8;18×7-8;200/50-10
- Tire / Rear
- 15×4.5-8;15×4.5-8;140/55-9
- Max.lifting height
- 3000mm
- Fork size L ×W ×T
- 920X100X35mm;920X100X35mm;1070X122X40mm
- Overall length(without fork)
- 1791mm;1901mm;1966mm
- Total width
- 1054mm;1054mm;1100mm
- Mast height（fork lowering）
- 1995mm;1995mm;2055mm
- Height of head guard
- 1970mm
- Speed / Travelling / Full load
- 15km/h;15km/h;14.5km/h
- Speed / Lifting / Full load
- 380mm/s;350mm/s;320mm/s
- Grade test reference / Full load
- 15%
- Electric motors / AC Drive motor
- 4.75KW/60min
- Electric motors / AC Hydraulic motor
- 10KW/15min;10KW/15min;12KW/15min
- Control type
- Travelling AC; Lifting AC
- Operation pressure
- 160kg/cm2;175kg/cm2;175kg/cm2
REFERENCE 0297-09
Heavy LFP counterbalance family
Coordinate the higher-load electric brief with load centre, mast, charger and actual shift conditions. The different capacity/load-centre columns need separate approval.
- Configuration order
- A;B;C
- Max.Lift capacity
- 5000kg;5000kg;5500kg
- Load center
- 500mm;600mm;600mm
- Power unit
- Lithium Iron Phosphate battery (LFP Battery)
- Operator type
- Driver/Seat
- Max.lifting height
- 3000mm
- Free lift
- 140mm
- Fork size L ×W ×T
- 1070×150×50mm;1220X150X60mm;1220X150X60mm
- Fork adjustment range(outside)
- 300~1370mm
- Total length(without fork)
- 3183mm;3422mm;3453mm
- Total width
- 1485mm
- Mast height (fork lowering)
- 2300mm;2360mm;2360mm
- Overall height fork raised / With backrest
- 4140mm
- Height to head guard
- 2420mm
- Turning raduis(outside)
- 2860mm;3100mm;3100mm
- Speed / Max Travelling / full load
- 17km/h;17km/h;16km/h
- Speed / Lifting speed / full load
- 350mm/s;340mm/s;320mm/s
- Speed / Lowering speed / full load
- 430mm/s;500mm/s;500mm/s
- Grade test reference 1.6km/h / full load / no load
- 15/18%;14/18%;13/18%
- Operating pressure / hydraulic system pressure (unit not stated)
- 19.6
- Truck weight
- 6900kg;7300kg;7700kg
- Tires / Qty / Front/Rear
- 2/2
- Tires / Type / Front/Rear
- Pneumatic tyre
- Tires / Specification / Front axle
- 300-15-18PR
- Tires / Specification / Rear axle
- 7.00-12-12PR
- Battery / Listed voltage
- 153.6V
- Electric motor / Driving motor
- 25Kw
- Electric motor / Hydraulic motor
- 20Kw
- Control type
- Liquid-cooled AC magnet synchronous type
REFERENCE 0297-10
Lead-acid reach-truck family
Specify pallet, racking, floor and aisle requirements for the reach construction. Confirm mast/height variants, battery and residual capacity from the current model chart.
- Configuration order
- A;B;C;D;E;F;G;H
- Load capacity
- 1500kg;1500kg;1800kg;1800kg;2000kg;2000kg;2500kg;2500kg
- Power unit
- Lead-acid Battery
- Tire / number / front/rear
- 2/1x +2(x=driven）
- Max.lifting height
- 3000mm;4000mm;3000mm;4000mm;3000mm;4000mm;3000mm;4000mm
- Fork size L ×W ×T
- 920X100X35mm;920X100X35mm;920X100X38mm;920X100X38mm;920X122X40mm;920X122X40mm;920X122X40mm;920X122X40mm
- Overall length(without fork)
- 1710mm;1890mm;1895mm;1895mm;1925mm;2095mm;2095mm;2095mm
- Total width
- 1090mm;1090mm;1090mm;1090mm;1250mm;1250mm;1250mm;1250mm
- Mast height（fork lowering）
- 1995mm;2495mm;1995mm;2495mm;2035mm;2585mm;2035mm;2585mm
- Height of head guard
- 2260mm;2260mm;2260mm;2260mm;2315mm;2315mm;2315mm;2315mm
- Weight（with standard battery）
- 1735kg;1725kg;1825kg;1905kg;2265kg;2375kg;2385kg;2475kg
- Speed / Travelling / Full load
- 10.5km/h
- Grade test reference / Full load
- 10%
- Battery / Voltage/capacity
- 48V/280V/AH;48V/280V/AH;48V/280V/AH;48V/280V/AH;48V/320V/AH;48V/320V/AH;48V/320V/AH;48V/320V/AH
- Battery / Weight(with battery box)
- 490Kg;490Kg;490Kg;490Kg;565Kg;565Kg;565Kg;565Kg
- Electric motors / AC Drive motor
- 4.6KW/60min;4.6KW/60min;4.6KW/60min;4.6KW/60min;6KW/60min;6KW/60min;6KW/60min;6KW/60min
- Electric motors / AC Hydraulic motor
- 8.2KW/15min;8.2KW/15min;8.2KW/15min;8.2KW/15min;8.6KW/15min;8.6KW/15min;8.6KW/15min;8.6KW/15min
- Control type
- Travelling AC; Lifting AC
- Operation pressure
- 140kg/cm2;140kg/cm2;160kg/cm2;160kg/cm2;175kg/cm2;175kg/cm2;175kg/cm2;175kg/cm2
- Load center
- Unconfirmed;500mm;500mm;500mm;500mm;500mm;500mm;500mm
REFERENCE 0297-11
Lead-acid counterbalance range
Compare the lead-acid configuration with the actual charging area, duty, battery handling and mast needs. The model and battery must be approved as a matching package.
- Configuration order
- A;B;C;D;E;F;G;H
- Load capacity
- 1500kg;1600kg;1750kg;2000kg;2500kg;3000kg;3500kg;4000kg
- Load center
- 500mm
- Power unit
- Lead-acid Battery
- Tire / Front
- 6.00-9-10-10PR;6.00-9-10-10PR;6.00-9-10-10PR;21X8-9-16PR;21X8-9-16PR;28X9-15-12PR;28X9-15-12PR;250-15-16PR
- Max.lifting height
- 3000mm
- Fork size L ×W ×T
- 920X100X35mm;920X100X35mm;920X100X35mm;1070X122X40mm;1070X122X40mm;1070X125X45mm;1070X125X50mm;1070X150X50mm
- Overall length(without fork)
- 1961mm;1961mm;2061mm;2245mm;2285mm;2510mm;2550mm;2775mm
- Total width
- 1070mm;1070mm;1070mm;1150mm;1150mm;1225mm;1225mm;1380mm
- Mast height（fork lowering）
- 1995mm;1995mm;1995mm;1995mm;1995mm;2075mm;2075mm;2150mm
- Height of head guard
- 2100mm;2100mm;2100mm;2145mm;2145mm;2190mm;2190mm;2425mm
- Weight（with standard battery）
- 2690kg;2790kg;2990kg;3440kg;3820kg;4660kg;5190kg;5400kg
- Speed / Travelling / Full load
- 14km/h;14km/h;14km/h;13.5km/h;13.5km/h;13.5km/h;13km/h;12km/h
- Grade test reference
- 15%;15%;15%;12.5%;12.5%;12.5%;12.5%;12.5%
- Battery / Voltage/capacity
- 48V-400V-AH/5hr;48V-400V-AH/5hr;48V-450V-AH/5hr;48V-450V-AH/5hr;48V-565V-AH/5hr;72V-480V-AH/5hr;72V-560V-AH/5hr;80V-550V-AH/5hr
- Battery / Weight(with battery box)
- 735Kg;735Kg;795Kg;795Kg;945Kg;1220Kg;1290Kg;1430Kg
- Electric motors / AC Drive motor
- 8KW;8KW;8KW;11KW;11KW;16.6KW;16.6KW;16.6KW
- Electric motors / AC Hydraulic motor
- 8KW;8KW;8KW;13KW;13KW;13.5KW;13.5KW;13.5KW
- Control type
- Travelling AC; Lifting AC
- Hydraulic system pressure
- 145kg/cm2;145kg/cm2;145kg/cm2;175kg/cm2;175kg/cm2;175kg/cm2;175kg/cm2;175kg/cm2
REFERENCE 0297-12
Three-wheel lead-acid range
Review the compact geometry and actual aisle/racking brief. The middle capacity column differs from the lithium-page table, so select the exact article rather than treating them as interchangeable.
- Configuration order
- A;B;C
- Load capacity
- 1500kg;1800kg;2000kg
- Load center
- 500mm
- Power unit
- Lead-acid Battery
- Tire / Front
- 18×7-8;18×7-8;200/50-10
- Max.lifting height
- 3000mm
- Fork size L ×W ×T
- 920X100X35mm;920X100X35mm;1070X122X40mm
- Overall length(without fork)
- 1791mm;1901mm;1966mm
- Total width
- 1054mm;1054mm;1100mm
- Mast height（fork lowering）
- 1970mm
- Weight（with standard battery）
- 2960kg;3080kg;3450kg
- Speed / Travelling / Full load
- 15km/h;15km/h;14.5km/h
- Grade test reference / Full load
- 20%
- Battery / Voltage/capacity
- 48V-350V-AH/5hr;48V-450V-AH/5hr;48V-450V-AH/5hr
- Battery / Weight(with battery box)
- 650-700Kg;820-870Kg;820-870Kg
- Electric motors / AC Drive motor
- 4.75KW/60min
- Electric motors / AC Hydraulic motor
- 10KW/15min;10KW/15min;12KW/15min
- Control type
- Travelling AC; Lifting AC
- Operation pressure
- 160kg/cm2;175kg/cm2;175kg/cm2
REFERENCE 0297-13
Rough-terrain diesel forklift
Compare 2WD/4WD directions, tyres, ground, slope and current engine configuration. Nominal capacity and taller mast options require the actual current load/operating limits.
- Configuration order
- A;B;C;D
- Load capacity
- 2500kg;2500kg;3500kg;3500kg
- Load center
- 500mm
- Power unit
- Diesel
- Operator type
- Driver/seat
- Truck weight
- 5000kg;5000kg;5500kg;5500kg
- Tire type
- Pneumatic
- Tires number X=(front/rear)
- 2X/2
- Tires model(front tire)
- 14-17.5-16TL
- Tires model(rear tire)
- 10-16.5-10TL
- Lifting height
- 3000mm
- Mast height(forks lowering)
- 2175mm;2175mm;2225mm;2225mm
- Overall height fork raised(with backrest)
- 4040mm;4040mm;4280mm;4280mm
- Free lifting height
- 160mm;160mm;150mm;150mm
- Height of head guard
- 2450mm
- Overall length(with/without forks)
- 4245/3135mm;4245/3135mm;4300/3180mm;4300/3180mm
- Width
- 1640mm
- Max travelling Speed, full/no load
- 20/20km/h
- Lifting speed, full/no load
- 480/520mm/s;480/520mm/s;450/520mm/s;450/520mm/s
- Lowering speed,full/no load
- 370/350mm/s
- Rated power
- 43.7/2300kW/rpm;43.2/2400kW/rpm;43.7/2300kW/rpm;43.2/2400kW/rpm
- Rated torque
- 177.6/1700Nm/rpm;198.5/1500Nm/rpm;177.6/1700Nm/rpm;198.5/1500Nm/rpm
- Number of cylinder/dispalcement
- 4-98X110/3.319;4-87X102.4/2.4;4-98X110/3.319;4-87X102.4/2.4
- Transmission speed(forward/backward)
- 2-1 power shift M/T
REFERENCE 0297-14
Walkie electric stacker
Specify pallet entry, lift requirement, floor and battery/charging arrangement. Select the actual mast option and corresponding residual-capacity chart.
- Configuration order
- A
- Drive
- electric
- Operating type
- walkie
- Load capacity
- 1500kg
- Load center
- 600mm
- Wheelbase
- 1166mm
- Wheels type
- PU
- Driving wheel size
- Ø252×60mm
- Balance wheel size
- Ø115×55mm
- Bearling wheel size
- Ø84×70mm
- Wheel quantity Driving wheel/Balance wheel /Bearing wheel
- 1/1/4
- Mast lowered height
- 1560/1810/2060/2210/2350mm
- Standard lift height
- 2000/2500/3000/3300/3500mm
- Max extend height
- 2515/3015/3515/3815/4015mm
- Lowered fork height
- 90mm
- Overall length
- 1764mm
- Overall width
- 790mm
- Fork-size sequence (as listed; dimension roles to confirm)
- 1150/185/55mm
- Outside width between forks
- 550/685mm
- Min.Aisle width for pallets 800×1200(1200 placed along the fork)
- 1930mm
- Min.Aisle width for pallets 1000×1200(1200 placed along the fork)
- 1970mm
- Min.Turning radius
- 1365mm
- Travel speed,laden/unladen
- 3.5/4.0km/h
- Drive motor / Lift motor
- DC0.63/DC2.2kw
- Battery voltage
- 24V
- Battery capacity
- 85Ah
- Service weight with battery
- 676kg
REFERENCE 0297-15
Walkie/stand-on electric stacker configurations
Compare narrow-leg constructions, standard two-stage or full-free three-stage masts and the required operating position. Each mast/height combination requires its own capacity and clearance review.
- Configuration order
- A;B;C;D
- Type
- Narrow legs
- Mast type
- 2-Stage STD;Full free 3-Stage;Full free 3-Stage;2-Stage STD
- Load capacity
- 1600kg;1600kg;1600kg;2000kg
- Load center
- 600mm
- Wheel base
- 1325mm;1375mm;1375mm;1325mm
- Operating type
- Walkie/Stand On
- Wheels type
- PU
- Wheel quantity Driving wheel/Balance wheel/Bearing wheel
- 1/2/4
- Driving wheel size
- ￠248×75
- Balance wheel size
- ￠84×70（Double wheels）
- Bearing wheel size
- ￠115×55
- Standard lift height
- 1400/2000/2500/3000/3300/3600/4000mm;3700/3900/4200/4500/4700/5000mm;5300/5500/5800mm;1400/2000/2500/3000/3300/3600/4000mm
- Lowered fork height
- 90mm
- Fork-size sequence (as listed; dimension roles to confirm)
- 1150(1200)/185/55mm
- Overall length
- 2050/2470mm;2105/2525mm;2105/2525mm;2050/2470mm
- Overall width
- 856mm;957mm;957mm;856mm
- Max extend height
- 1900/2500/3000 3500/3800/4100/4500mm;4200/4400/4700/5000/5200/5500mm;5800/6000/6300mm;1900/2500mm
- Mast lowered height
- 1185/1535/1765/1980/2135/2335/2500mm;1800/1900/1985/2085/2135/2235mm;2520/2590/2690mm;1185/1535mm
- Min.Turning radius
- 1580/1990mm;1630/2040mm;1630/2040mm;1580/1990mm
- Min.Aisle width for pallets 800×1200
- 2180/2580mm;2230/2625mm;2230/2625mm;2180/2580mm
- Min.Aisle width for pallets 1000×1200
- 2210/2600mm;2260/2650mm;2260/2650mm;2210/2600mm
- Travel speed,laden/unladen
- 5/5km/h;5/5km/h;5/5km/h;4/4.5km/h
- Lift speed,laden/unladen
- 130/230mm/s;130/230mm/s;130/230mm/s;90/170mm/s
- Lowering speed,laden/unladen
- 130/230mm/s;130/230mm/s;130/230mm/s;80/170mm/s
- Grade test reference,laden/unladen
- 5/7%
- Drive motor / Lift motor /Steering motor
- AC1.5/DC3/DC0.15KW
- Battery voltage
- 24V
- Battery capacity
- 280Ah
- Battery weight
- 235kg
- Service weight with battery
- 1240kg;1578kg;1610kg;1240kg
- Free lifting height
- Unconfirmed;1335/1448/1520/1620/1670/1770mm;2074/2134/2234mm;Unconfirmed
REFERENCE 0297-16
1.5-tonne walkie pallet truck
Review pallet size, fork entry, surface and battery package for low-level transport. Distinguish lowered fork height, maximum fork height and lift stroke.
- Configuration order
- A;B
- Load capacity
- 1500kg
- Load center
- 600mm
- Wheel base
- 1288mm
- Operating type
- Walkie
- Wheels type
- PU
- Wheel quantityDriving wheel/Balance wheel /Bearing wheel
- 1/0/4
- Driving wheel size
- ￠210*70mm
- Balance wheel size
- ￠84×70（Double wheels） mm
- Min.fork lowered height
- 85mm
- Max.fork lifting height
- 205mm
- Outside width between forks
- 560/685mm
- Inside width between forks
- 250/375
- Fork length
- 1150/1200mm
- Fork width
- 155mm
- Fork thickness
- 75mm
- Overall length
- 1685mm
- Overall width
- 677mm
- Overall height(With handle)
- 1219mm
- Overall height(Without handle)
- 615mm
- Min.Turning radius
- 1491mm
- Min.Aisle width for pallets 800×1200
- 1844mm
- Min.Aisle width for pallets 1000×1200
- 1878mm
- Travel speed,laden/unladen
- 4/4.5km/h
- Lift speed,laden/unladen
- 35/40mm/s
- Lowering speed,laden/unladen
- 65/60mm/s
- Grade test reference,laden/unladen
- 6/20%
- Drive motor
- DC 0.63KW
- Lift motor
- DC 0.8KW
- Battery voltage / capacity
- 2*12/85V/Ah;24/28V/Ah
- Brake
- Electromagnetic/Regenerative
- Battery weight
- 2*24kg;9.5kg
- Service weight with battery
- 203kg;165kg
REFERENCE 0297-17
2–3-tonne electric pallet-truck family
Compare walkie/stand-on configurations with actual pallet, route, battery and charging requirements. Select the fork and controls for the intended task.
- Configuration order
- A
- Load capacity
- 2000/2500/3000kg
- Load center
- 600mm
- Wheel base
- 1493mm
- Operating type
- Walkie/Stand On
- Wheels type
- PU
- Wheel quantity Driving wheel/Balance wheel /Bearing wheel
- 1/2/4
- Driving wheel size
- ￠248×75mm
- Balance wheel size
- ￠84×80 （Double wheels） mm
- Bearing wheel size
- ￠115×55mm
- Min.fork lowered height
- 85mm
- Max.fork lifting height
- 205mm
- Overall fork width
- 550/685mm
- Fork length
- 1150/1200mm
- Fork width
- 170mm
- Fork thickness
- 75mm
- Overall length
- 1916/2333mm
- Overall width
- 790mm
- Overall height(With handle)
- 1455mm
- Overall height(Without handle)
- 845mm
- Min.Turning radius
- 1746/2158mm
- Min.Aisle width for pallets 800×1200
- 2046/2435mm
- Min.Aisle width for pallets 1000×1200
- 2077/2458mm
- Travel speed,laden/unladen
- 5/5km/h
- Lift speed,laden/unladen
- 20/25mm/s
- Lowering speed,laden/unladen
- 40/30mm/s
- Grade test reference,laden/unladen
- 5/7%
- Drive motor
- AC 1.5KW
- Lift motor
- DC 1.2KW
- Steering motor
- DC 0.15KW
- Battery voltage / capacity
- 24/210V/Ah
- Battery weight
- 245kg
- Service weight with battery
- 830kg
REFERENCE 0297-18
Manual pallet-truck configurations
Specify load, pallet clearance, fork length/spacing and wheel/surface needs. Different lowered heights and capacities belong to separate listed constructions.
- Configuration order
- A;B;C;D;E
- Capacity
- 2000kg;2500kg;3000kg;2500kg;3000kg
- Min.fork height
- 75mm;75mm;75mm;75/85mm;75/85mm
- Max.fork height
- 188mm
- Steering wheel
- 180*50mm
- Size of fork
- 160mm
- Width overall forks
- 550/685mm
- Fork length
- 1150/1220mm
- weight
- 59kg;65kg;69kg;70kg;75kg
REFERENCE 0297-19
Forklift parts and service-packing brief
Identify the machine, serial/configuration, part number, drawing and required quantity. Discuss current spare-part availability, identification labels and packing as part of the procurement plan.
- Direction
- Forklift and warehouse-equipment spare parts
- Identification
- Serial/configuration and exact part reference required
REFERENCE 0297-20
Application-specific attachment enquiry
Discuss load geometry, clamp or other attachment interface, hydraulics and host-truck capacity. A previous application case is a direction for evaluation, not evidence of current compatibility with every truck.
- Direction
- Task-specific forklift attachments
- Approval basis
- Host-truck/attachment combination and residual-capacity assessment
Published capacities are separate article/series references. They do not establish full capacity at every height, load centre or attachment. Standard table lift height differs from optional mast ranges. Battery, engine, emissions, current documents and the exact load/operating chart must be approved for the selected configuration. Each card uses its own A/B/C configuration order. A single shared value applies across that card’s source columns; semicolon vectors retain every column in order. “Unconfirmed” means the source did not supply a reliable value. Slash-separated cases stay together; unequal mast vectors are not cross-paired. Grade-test figures do not establish a safe operating slope; pressure units and actual duty ratings require current confirmation.
What matters for this category
A better brief.
A clearer comparison.
Focus the sourcing conversation on the features, materials and production details that make a difference to your product range.
A complete powertrain comparison
Compare IC, lithium/LFP, lead-acid and manual handling directions within one coordinated fleet brief.
Useful configuration distinctions
Keep three-wheel, reach, rough-terrain, cushion-tyre and pallet-handling constructions separate when assessing access, charging and load requirements.
Procurement and parts coordination
Include the approved configuration, inspection criteria, serial/part identification, labels and packing in the written order scope.
Branding, configuration & packaging
Make the product
fit your programme.
Bring artwork, reference samples and a target cost. The available process, minimum quantity, sample charges and development scope are reviewed for the chosen option.
Equipment configuration brief
Provide load/material geometry, load centre, lift, aisle, surface, duty and destination requirements. Engine, battery, mast, tyre and accessory choices need current feasibility confirmation.
Presentation and parts packing
Discuss suitable colour/graphics, identification, accessories, spare-part labels and packing. Tooling, non-standard engineering and rights require written agreement.
Demonstration and approval plan
Agree current drawings, configuration sheet, demonstration/inspection scope, acceptance criteria, quantity and schedule. Trial-machine or sample costs are quoted for the project.
Quality & product evidence
Turn requirements
into checks.
Agree which product characteristics need testing and how the approved sample relates to the bulk order.
Configuration and physical checks
Verify engine/battery, mast, forks, tyres, controls, dimensions, identification and selected options against the approved technical offer.
Functional and load evidence
Agree relevant braking, steering, lifting, hydraulics and other inspection criteria; request the configured load chart and appropriate test records.
Market and operating review
Match engine/emissions, electrical supply, charging, battery transport and conformity documents to the actual legal manufacturer, article and destination.
Test capability is a starting point for the inspection plan. Request the method, applicable model and results needed for your order.
Documents matched to the order
Ask for evidence
that fits the product.
Identify the exact series, powertrain and mast first so the specification and documents can be checked against the intended load, work environment and destination.
State the sales market, intended users and required files in your first enquiry. Current validity and scope are checked for the selected supplier and product; a category description does not certify every item.
Share your document requirements ↗- Current technical specification
- Request the exact mast/configuration, load/operating chart, dimensions/mass, battery/charger or engine details, manuals and maintenance schedule.
- Relevant current supporting records
- Confirm conformity and inspection scope, issuer and validity for the selected article and market. A general certificate display does not approve every configuration.
- Commercial and service agreement
- Confirm price basis, quantity, demonstration/inspection, dispatch, packing, spare parts and the actual warranty/service terms in writing.
Built around how you sell
Different buyers.
Different specifications.
Your sales channel changes the assortment, packaging and quality priorities. Tell us the intended use as well as the product name.
Industrial and warehouse fleets
Compare battery and IC configurations with actual pallet/load, aisle, ventilation, charging and shift requirements.
Outdoor and irregular-surface handling
Assess rough-terrain and appropriate IC/battery requests with the surface, tyres, slope, load and approved operating limits.
Low-level transfer and racking
Match pallet trucks, stackers and reach-truck configurations to pallet entry, racking, clearances and load charts.
From first brief to a defined order
One contact.
A practical next step.
Samples, commercial terms and responsibilities are agreed for the project. Use the same product and packing specification when comparing quotations.
Share the requirement
Product, reference image, quantity, sales market and timing.
Compare suitable options
Review configuration, materials, sample scope and relevant documents.
Approve the specification
Agree artwork, packaging, sample, testing and inspection criteria.
Confirm the order plan
Set price, payment, production, delivery and defect remedies in writing.
Buyer questions
Before you send
your first enquiry.
Practical answers about this sourcing direction, customization and the reference options. Your agreed specification and written quotation determine the actual order.
Which power types can I compare?
Diesel, gasoline/LPG, lithium/LFP, lead-acid and manual handling directions are included. Specify the operating environment, duty, charging/fuelling and destination requirements.
Are lithium and lead-acid versions interchangeable?
No. Battery chemistry, enclosure, capacity, mass, controls and charger must match the selected configuration. Similar family names do not establish the same specification.
Does a capacity range apply at maximum mast height?
No. Obtain the exact load chart with the chosen mast, load centre and attachment. Published nominal capacity and maximum-height options cannot be combined without the current limits.
How do I choose between counterbalance, three-wheel and reach constructions?
Provide pallet/load dimensions, aisle and rack layout, floor, operating position and required lift. Compare actual dimensions and operating charts instead of choosing from the product name alone.
Can I request spare parts or an attachment?
Provide the truck model/configuration, serial, part reference or drawing and task. Attachments need carriage, hydraulic and combined residual-capacity assessment.
What should I check for rough-terrain use?
Define the ground, slope, tyres, traction, load and working route. Confirm the current 2WD/4WD configuration and operating limits; the category does not guarantee stability on every surface.
Are all certificates and engine versions current for my country?
No blanket approval is implied. Request current article-specific conformity, emissions, electrical/battery and other required records for the actual legal supply route.
What are the minimum order, lead time, sample and warranty terms?
They depend on the configuration, quantity, demonstration/inspection, packing and service scope. Obtain the current written quotation rather than applying generic platform or historical terms.
Who handles my enquiry?
Factory Sourcing Hub handles this enquiry as an independent sourcing and trading service. The product route, supplier suitability, sample scope and order responsibilities are agreed for the actual project.
How do I get a price and order minimum?
Send the product reference, quantities per variation, customization and packaging. Prices, minimums, sample charges and delivery dates are confirmed in a current quotation; the page is not a live inventory or price feed.
Can I discuss samples and inspection before ordering?
Yes. State whether you need a reference sample, a customized sample or development work. Agree the sample cost and shipping, approval specification, inspection plan and remedy for non-conforming goods before the bulk order.
What should I attach to my email?
Reference images, drawings, logo artwork and a product list are useful. Include quantities, the intended users and sales market, packaging, required documents and timing. After submitting the form, email attachments to kunhuow@gmail.com with your enquiry reference.
Tell us what you are planning
Your next order
starts with a brief.
A reference picture or a short description is enough to begin. Add the details you already know; the optional fields help make the follow-up more useful.
- Truck form, load dimensions/mass, load centre and required height
- Pallet/aisle/rack, floor/terrain, duty and power/charger requirements
- Destination, required documents, attachments, inspection and parts brief
- Quantity, packing/transport requirements and target arrival
Download the enquiry checklist ↓
Independent sourcing and trading service. Supplier choice, service costs and order conditions are discussed for your project.
Discuss your requirements.
Product selection, customization, samples and quotation enquiries.
Explore other sourcing directions
More options for
your product list.
Compare separate product ranges and prepare a brief that fits your assortment.
Forklifts, Warehouse Trucks & Airport Equipment Sourcing
Source diesel, LPG and electric forklifts, side-loaders, rough-terrain trucks, pallet and reach equipment, baggage tractors, belt loaders and passenger stairs with configuration, load-chart and documentation review.
Explore this service ↗
Industrial Forklifts, Container Handling & AGV Sourcing
Source electric, diesel and LPG forklifts, reach trucks, warehouse equipment, container handlers, tow tractors, terrain equipment, AGVs, attachments and parts with configuration review.
Explore this service ↗
Lift Tables, Pallet Trucks & Warehouse Equipment Sourcing
Source manual and electric lift tables, platform trucks, pallet transport, stackers, reach trucks, order pickers, towing equipment and project-specific warehouse systems.
Explore this service ↗
Forklift, Reach, Narrow-Aisle & Compact Loader Sourcing
Source diesel, LPG, short-wheelbase and electric forklifts, rough-terrain equipment, double-deep reach and narrow-aisle trucks, pallet/stacking equipment and compact loaders with configuration and service review.
Explore this service ↗Information basis: published product information reviewed . Reference details support a sourcing discussion. Current supply, samples and product-specific documents are confirmed for the selected item.