Specify the Finish, Air Tool & Lubrication System Build a Complete Workshop Order
Source finishing guns, airless and powered sprayers, pneumatic fastening and finishing tools, grease injectors, tyre-service equipment, air connections and configured tool cases.
Manufacturing, product documents and order conditions depend on the model and supply route selected for your project.
Start with a product reference, intended use and estimated quantity. We bring product selection, sample questions and quotation details into one conversation.
Email your reference image ↗Choose a focused product or discuss a coordinated assortment. Each direction can be developed into a more specific model and packaging brief.
Full-size and miniature gravity/suction guns cover distinct cup, nozzle, needle, air-cap, fluid-path and pattern configurations. Plastic, forged or die-cast metal body and selected finishes remain tied to the actual gun.
Enquire about this range ↗Gravity, side-cup and suction airbrushes combine with selected glass jars, braided hoses and small compressors. Electrical supply, air demand and intended coating determine the actual configuration.
Enquire about this range ↗Compact, diaphragm, plunger, brushless and air-driven systems offer separate tip, hose, supply, control and delivery directions. Handheld powered guns and backpack battery arrangements extend the range.
Enquire about this range ↗Small pressure pots, wheeled mixing tanks, agitator stands, refilling supports, fluid tips, filters, swivels and replacement cups support a complete coating-system brief. Spray-gun cleaning-system enquiries can be scoped against the selected fluid and cleaning method.
Enquire about this range ↗Compact, rocking-dog, single/twin/pinless-hammer, butterfly and extended-anvil directions combine with aluminium/composite housings, separate exhaust positions and actual drive interfaces.
Enquire about this range ↗Reversible and fixed-direction drills, mini/extended/angled die grinders, guarded cut-off tools and angle grinders address different reach, holder, wheel and air-supply requirements.
Enquire about this range ↗Belt, dual-action, orbital, jitterbug, miniature and angled sanding configurations include non-vacuum, central extraction and self-collection forms. Electric or battery extractors still need the correct pneumatic sander supply.
Enquire about this range ↗Air hammers, needle scalers, body saws/files, shears, nibblers and a C-frame planishing system provide separate reciprocating-tool and panel-preparation directions.
Enquire about this range ↗Air pump rods, pump-and-barrel injectors, hand/foot pumps, electric and battery grease delivery, control guns, trolleys, followers and high-pressure hoses are selected as matched assemblies.
Enquire about this range ↗Cup/hose-fed washing, abrasive pickup, derusting wands, recycling accessories and short/long blow-gun nozzles offer distinct workshop-cleaning directions. Media, nozzle, pressure and containment need item approval.
Enquire about this range ↗Mechanical/digital gauges, chucks, inflation tips, regional-profile couplers/nipples, adaptors, distribution blocks, air preparation, swivel joints and PU/PE/PVC/braided hoses support an exact air-system plan.
Enquire about this range ↗Individual-tool cases, multi-tool repair packs and mixed spray/blow/wash/inflation kits preserve their component bills, socket/bit/stone sizes, hose choices, presentation and count conventions.
Enquire about this range ↗Polyurethane foam and pneumatic cartridge-adhesive directions are separate from paint, abrasive and lubrication systems. Match the actual canister/cartridge, seals and cleaning medium.
Enquire about this range ↗Use these options to describe what you are buying. The public references identify your enquiry; the final model and specification are confirmed before an order.
Die-cast aluminium construction and rear exhaust suit weld preparation, rust removal and light finishing. The wider-belt configuration adds a composite grip, safety trigger and speed adjustment.
Die-cast aluminium construction and rear exhaust suit weld preparation, rust removal and light finishing. The wider-belt configuration adds a composite grip, safety trigger and speed adjustment.
An aluminium tool for sanding, scraping and sawing, with a rotating rear exhaust and adjustable air inlet. The referenced set contains a pad, 5 mm hex key, two scrapers and three saw blades.
Inline and angled layouts offer different reach, chuck and speed choices. Select the stated reversible or non-reversible action and exact keyed or optional keyless chuck for the job. The stated housing is die-cast aluminium; an optional keyless chuck requires the selected version. The selected drill is non-reversible.
A compact impact mechanism provides a short-body fastening direction. Select the actual drive, torque reference, air demand and forward/reverse arrangement for the assembly space. The housing is composite, with combined forward/reverse and torque controls.
A pump-and-barrel assembly for vehicle, machinery and workshop lubrication. Keep pump ratio, output, barrel, follower plate and hose matched to the selected grease and operating conditions.
A pump-and-barrel assembly for vehicle, machinery and workshop lubrication. Keep pump ratio, output, barrel, follower plate and hose matched to the selected grease and operating conditions.
A manual barrel pump for service lubrication. Output per stroke and barrel size identify separate configurations; approve the grease, hose and dispensing connection together.
A manual barrel pump for service lubrication. Output per stroke and barrel size identify separate configurations; approve the grease, hose and dispensing connection together.
A portable painting system for suitable furniture, wall, metal and floor coatings. Keep the motor supply, tip, hose, fluid delivery and spray pattern paired with the actual configuration.
A brushless motor and electronic control accompany a modular fluid section, stainless piston and ceramic-insert construction direction. Select the exact pump, tip and coating conditions before trial.
Full-size, miniature, gravity and suction configurations use distinct cup, nozzle, air demand and spray pattern choices. Stainless needle/nozzle and aluminium or plastic construction depend on the selected configuration. The referenced metal body is die-cast aluminium.
Full-size, miniature, gravity and suction configurations use distinct cup, nozzle, air demand and spray pattern choices. Stainless needle/nozzle and aluminium or plastic construction depend on the selected configuration. The referenced metal body is die-cast aluminium.
A controlled finishing direction with stainless needle/nozzle components and selected brass air-cap or plated body constructions. Compare cup size, air input, fluid delivery and pattern before specifying the coating trial. A chrome-plated brass air cap, coated fluid path and coarse-thread cup connection are specified.
A controlled finishing direction with stainless needle/nozzle components and selected brass air-cap or plated body constructions. Compare cup size, air input, fluid delivery and pattern before specifying the coating trial. The body has a plated finish direction and automatically loaded needle seal; the cup connector and trigger have stainless constructions.
A coloured plastic body combines stainless needle and nozzle components. Full-size and miniature cup/nozzle configurations remain separate; confirm the material path against the actual coating.
A coloured plastic body combines stainless needle and nozzle components. Full-size and miniature cup/nozzle configurations remain separate; confirm the material path against the actual coating.
A suction-cup coating direction for the selected primer, intermediate or finishing task. Nozzle, cup and fluid delivery vary by configuration. Polished, powder-colour, nickel, chrome or anodized finishes can be discussed where specified.
A pneumatic sanding tool is combined with a separately powered extractor. Plan both the compressed-air supply and extractor electrical supply, including hose, pad and dust collection connection.
Full-size, miniature, gravity and suction configurations use distinct cup, nozzle, air demand and spray pattern choices. Stainless needle/nozzle and aluminium or plastic construction depend on the selected configuration. The referenced metal body is die-cast aluminium.
A portable painting system for suitable furniture, wall, metal and floor coatings. Keep the motor supply, tip, hose, fluid delivery and spray pattern paired with the actual configuration.
Full-size, miniature, gravity and suction configurations use distinct cup, nozzle, air demand and spray pattern choices. Stainless needle/nozzle and aluminium or plastic construction depend on the selected configuration. The referenced metal body is die-cast aluminium.
A diaphragm system with a forged pump-cover direction and stainless inlet/outlet valves. Match the actual motor supply, coating, tip and pressure-rated fluid components; approval is specific to the selected assembly.
An air-piston mechanism delivers grease while the trigger is held. A priming spring and piston design support the feed arrangement. The two referenced air-pressure and compression configurations are distinct.
An air-piston mechanism delivers grease while the trigger is held. A priming spring and piston design support the feed arrangement. The two referenced air-pressure and compression configurations are distinct.
A brushless copper-motor direction uses a chain cartridge mechanism with magnetic chain retention. Specify the grease grade, cartridge, hose, nozzle, battery and charger as a complete configuration.
A 90-degree rotating handle and battery/direct storage-battery supply options address different access and service arrangements. Approve the electrical connection and complete grease delivery assembly.
A copper nozzle and needle, soft grip, detachable cleaning arrangement and stepless fluid/fan adjustment provide a handheld coating direction. Battery and mains-powered configurations have distinct ratings and nozzle choices.
A copper nozzle and needle, soft grip, detachable cleaning arrangement and stepless fluid/fan adjustment provide a handheld coating direction. Battery and mains-powered configurations have distinct ratings and nozzle choices.
A compact battery-powered coating direction for compatible latex, acrylic and stain applications. The actual coating, viscosity method, tip, pressure and fluid delivery require the selected operating file.
A trolley/support direction for moving service equipment. Approve the actual load, support dimensions, pump and barrel connection as an assembly.
A hard-anodized forged body combines a POM cup, stainless needle/nozzle, coarse-thread cup connection, rotary inlet and short-turn adjustment. HVLP and LVMP configurations have separate air-cap and fluid requirements. The inlet can rotate through 360 degrees and the air-cap adjustment uses a 1.5-turn direction.
A hard-anodized forged body combines a POM cup, stainless needle/nozzle, coarse-thread cup connection, rotary inlet and short-turn adjustment. HVLP and LVMP configurations have separate air-cap and fluid requirements. The inlet can rotate through 360 degrees and the air-cap adjustment uses a 1.5-turn direction.
A suction-cup coating direction for the selected primer, intermediate or finishing task. Nozzle, cup and fluid delivery vary by configuration. Polished, powder-colour, nickel, chrome or anodized finishes can be discussed where specified.
A die-cast aluminium body contains a pinless hammer and oil-bath lubrication arrangement. The long anvil, side exhaust, removable auxiliary handle and speed/torque adjustment address heavy fastening access.
Ratchet heads, front/rear or rotating exhaust positions and aluminium/composite housings provide different access directions for close-space assembly. Keep drive, speed and torque tied to the selected tool. This aluminium form has front exhaust.
Ratchet heads, front/rear or rotating exhaust positions and aluminium/composite housings provide different access directions for close-space assembly. Keep drive, speed and torque tied to the selected tool. This aluminium form has front exhaust.
Ratchet heads, front/rear or rotating exhaust positions and aluminium/composite housings provide different access directions for close-space assembly. Keep drive, speed and torque tied to the selected tool. This aluminium form has rear exhaust and a soft grip.
Ratchet heads, front/rear or rotating exhaust positions and aluminium/composite housings provide different access directions for close-space assembly. Keep drive, speed and torque tied to the selected tool. This form has rotating rear exhaust.
Ratchet heads, front/rear or rotating exhaust positions and aluminium/composite housings provide different access directions for close-space assembly. Keep drive, speed and torque tied to the selected tool. This form has a rotating middle exhaust.
Ratchet heads, front/rear or rotating exhaust positions and aluminium/composite housings provide different access directions for close-space assembly. Keep drive, speed and torque tied to the selected tool. This form uses a composite body and rear exhaust.
Twin-hammer or piston mechanisms combine aluminium housings with direction and speed controls. Select the actual bit-holder geometry, fastener task, exhaust arrangement and air supply. This configuration uses twin hammers, side exhaust and left/right control.
Twin-hammer or piston mechanisms combine aluminium housings with direction and speed controls. Select the actual bit-holder geometry, fastener task, exhaust arrangement and air supply. This configuration uses a piston mechanism, handle exhaust, variable speed and side reverse control.
Twin-hammer or piston mechanisms combine aluminium housings with direction and speed controls. Select the actual bit-holder geometry, fastener task, exhaust arrangement and air supply. This configuration uses twin hammers, handle exhaust and variable speed.
Twin-hammer or piston mechanisms combine aluminium housings with direction and speed controls. Select the actual bit-holder geometry, fastener task, exhaust arrangement and air supply. This configuration uses twin hammers, handle exhaust and variable speed.
Cutting, chipping and scraping directions use selected aluminium or composite housings and steel barrel/piston components. Round or hex chisel sets and quick-change retention are configuration-specific. A composite housing and PA6 trigger are specified.
Cutting, chipping and scraping directions use selected aluminium or composite housings and steel barrel/piston components. Round or hex chisel sets and quick-change retention are configuration-specific. An aluminium body, hardened-steel barrel/piston and power regulator are specified.
Cutting, chipping and scraping directions use selected aluminium or composite housings and steel barrel/piston components. Round or hex chisel sets and quick-change retention are configuration-specific. An aluminium body, hardened-steel barrel/piston and power regulator are specified.
Cutting, chipping and scraping directions use selected aluminium or composite housings and steel barrel/piston components. Round or hex chisel sets and quick-change retention are configuration-specific. An aluminium body, hardened-steel barrel/piston and power regulator are specified. A quick-change chuck-retainer direction is specified.
Inline and angled layouts offer different reach, chuck and speed choices. Select the stated reversible or non-reversible action and exact keyed or optional keyless chuck for the job. The stated housing direction is composite. The selected drill is reversible. A PA6 trigger is specified.
Inline and angled layouts offer different reach, chuck and speed choices. Select the stated reversible or non-reversible action and exact keyed or optional keyless chuck for the job. The stated housing direction is composite. The selected drill is non-reversible.
Inline and angled layouts offer different reach, chuck and speed choices. Select the stated reversible or non-reversible action and exact keyed or optional keyless chuck for the job. The stated housing direction is composite. The selected drill is non-reversible.
Inline and angled layouts offer different reach, chuck and speed choices. Select the stated reversible or non-reversible action and exact keyed or optional keyless chuck for the job. The stated housing direction is composite. The selected drill is non-reversible.
Inline and angled layouts offer different reach, chuck and speed choices. Select the stated reversible or non-reversible action and exact keyed or optional keyless chuck for the job. The stated housing direction is composite. The selected drill is non-reversible. A PA6 trigger is specified. Speed adjustment is placed on top.
Inline and angled layouts offer different reach, chuck and speed choices. Select the stated reversible or non-reversible action and exact keyed or optional keyless chuck for the job. The stated housing is die-cast aluminium; an optional keyless chuck requires the selected version. The selected drill is reversible.
Full-size, miniature, gravity and suction configurations use distinct cup, nozzle, air demand and spray pattern choices. Stainless needle/nozzle and aluminium or plastic construction depend on the selected configuration. The referenced metal body is die-cast aluminium.
Inline, miniature, extended and angled layouts provide different deburring and finishing access. Select the actual collet option, housing, exhaust, safety trigger and attachment speed rating. A composite housing, rotating rear exhaust and adjustable inlet are specified. The extension direction is nominal 1 inch.
Inline, miniature, extended and angled layouts provide different deburring and finishing access. Select the actual collet option, housing, exhaust, safety trigger and attachment speed rating. A composite housing, rotating rear exhaust and adjustable inlet are specified. The extension direction is nominal 3 inch.
Inline, miniature, extended and angled layouts provide different deburring and finishing access. Select the actual collet option, housing, exhaust, safety trigger and attachment speed rating. A composite housing, rotating rear exhaust and adjustable inlet are specified. The extension direction is nominal 5 inch.
Inline, miniature, extended and angled layouts provide different deburring and finishing access. Select the actual collet option, housing, exhaust, safety trigger and attachment speed rating. The extension direction is nominal 5 inch. An aluminium housing, safety trigger and rotating rear exhaust are specified.
Inline, miniature, extended and angled layouts provide different deburring and finishing access. Select the actual collet option, housing, exhaust, safety trigger and attachment speed rating. An aluminium housing, rear exhaust and 90-degree head are specified.
Inline, miniature, extended and angled layouts provide different deburring and finishing access. Select the actual collet option, housing, exhaust, safety trigger and attachment speed rating. An aluminium housing, rotating rear exhaust and 90-degree head are specified.
A compact cutting direction combines an air motor, trigger and steel guard. Exhaust and handle layouts vary. Match wheel dimensions, arbor and marked operating limits to the selected tool.
A compact cutting direction combines an air motor, trigger and steel guard. Exhaust and handle layouts vary. Match wheel dimensions, arbor and marked operating limits to the selected tool.
An aluminium housing, front exhaust and auxiliary handle provide a grinding direction for metal preparation. Speed adjustment and selected wheel sizes vary by configuration.
An aluminium housing, front exhaust and auxiliary handle provide a grinding direction for metal preparation. Speed adjustment and selected wheel sizes vary by configuration.
An aluminium housing, front exhaust and auxiliary handle provide a grinding direction for metal preparation. Speed adjustment and selected wheel sizes vary by configuration.
An aluminium housing, front exhaust and auxiliary handle provide a grinding direction for metal preparation. Speed adjustment and selected wheel sizes vary by configuration.
An angled head and TPE grip provide access for small-area preparation. Hook-and-loop or vinyl pad directions are offered for selected configurations; match the attachment and required finish.
An aluminium housing and TPE grip combine with a dual-action sanding layout. Pad fixing and exhaust choices depend on the selected configuration.
An aluminium housing and TPE grip combine with a dual-action sanding layout. Pad fixing and exhaust choices depend on the selected configuration.
A front-exhaust aluminium sanding direction includes three referenced sanding-paper sizes. Approve the actual pad, spindle interface and tool identification before specifying the assembly.
A balanced bearing layout, positive sheet clamps and release throttle provide a rectangular-sheet finishing direction. Match the actual pad, sheet and finish requirement.
A pump-and-barrel assembly for vehicle, machinery and workshop lubrication. Keep pump ratio, output, barrel, follower plate and hose matched to the selected grease and operating conditions.
A pump-and-barrel assembly for vehicle, machinery and workshop lubrication. Keep pump ratio, output, barrel, follower plate and hose matched to the selected grease and operating conditions.
A manual barrel pump for service lubrication. Output per stroke and barrel size identify separate configurations; approve the grease, hose and dispensing connection together.
A powered air-and-gun arrangement provides spraying without a separate workshop compressor. Detachable nozzles, selected plastic or aluminium gun construction, cup and supply ratings vary by configuration.
A powered air-and-gun arrangement provides spraying without a separate workshop compressor. Detachable nozzles, selected plastic or aluminium gun construction, cup and supply ratings vary by configuration.
A powered air-and-gun arrangement provides spraying without a separate workshop compressor. Detachable nozzles, selected plastic or aluminium gun construction, cup and supply ratings vary by configuration.
A powered air-and-gun arrangement provides spraying without a separate workshop compressor. Detachable nozzles, selected plastic or aluminium gun construction, cup and supply ratings vary by configuration.
A powered air-and-gun arrangement provides spraying without a separate workshop compressor. Detachable nozzles, selected plastic or aluminium gun construction, cup and supply ratings vary by configuration.
A powered air-and-gun arrangement provides spraying without a separate workshop compressor. Detachable nozzles, selected plastic or aluminium gun construction, cup and supply ratings vary by configuration.
A diaphragm system with a forged pump-cover direction and stainless inlet/outlet valves. Match the actual motor supply, coating, tip and pressure-rated fluid components; approval is specific to the selected assembly.
Full-size, miniature, gravity and suction configurations use distinct cup, nozzle, air demand and spray pattern choices. Stainless needle/nozzle and aluminium or plastic construction depend on the selected configuration.
Full-size, miniature, gravity and suction configurations use distinct cup, nozzle, air demand and spray pattern choices. Stainless needle/nozzle and aluminium or plastic construction depend on the selected configuration. The referenced metal body is die-cast aluminium.
Full-size, miniature, gravity and suction configurations use distinct cup, nozzle, air demand and spray pattern choices. Stainless needle/nozzle and aluminium or plastic construction depend on the selected configuration. The referenced metal body is die-cast aluminium.
Full-size, miniature, gravity and suction configurations use distinct cup, nozzle, air demand and spray pattern choices. Stainless needle/nozzle and aluminium or plastic construction depend on the selected configuration.
Full-size, miniature, gravity and suction configurations use distinct cup, nozzle, air demand and spray pattern choices. Stainless needle/nozzle and aluminium or plastic construction depend on the selected configuration.
A dual-rod cylinder, compensating pump seal, ceramic-treated plunger and ceramic/polymer valve direction support a configured air-and-fluid painting system. A two-gun arrangement is referenced; specify the actual coating and supply conditions.
A controlled finishing direction with stainless needle/nozzle components and selected brass air-cap or plated body constructions. Compare cup size, air input, fluid delivery and pattern before specifying the coating trial. The body has a plated finish direction and automatically loaded needle seal; the cup connector and trigger have stainless constructions.
Full-size, miniature, gravity and suction configurations use distinct cup, nozzle, air demand and spray pattern choices. Stainless needle/nozzle and aluminium or plastic construction depend on the selected configuration. The referenced metal body is die-cast aluminium.
Full-size, miniature, gravity and suction configurations use distinct cup, nozzle, air demand and spray pattern choices. Stainless needle/nozzle and aluminium or plastic construction depend on the selected configuration. The referenced metal body is die-cast aluminium.
Full-size, miniature, gravity and suction configurations use distinct cup, nozzle, air demand and spray pattern choices. Stainless needle/nozzle and aluminium or plastic construction depend on the selected configuration. The referenced metal body is die-cast aluminium.
Full-size, miniature, gravity and suction configurations use distinct cup, nozzle, air demand and spray pattern choices. Stainless needle/nozzle and aluminium or plastic construction depend on the selected configuration.
A suction-cup coating direction for the selected primer, intermediate or finishing task. Nozzle, cup and fluid delivery vary by configuration. Polished, powder-colour, nickel, chrome or anodized finishes can be discussed where specified.
A suction-cup coating direction for the selected primer, intermediate or finishing task. Nozzle, cup and fluid delivery vary by configuration. Polished, powder-colour, nickel, chrome or anodized finishes can be discussed where specified.
A suction-cup coating direction for the selected primer, intermediate or finishing task. Nozzle, cup and fluid delivery vary by configuration. Polished, powder-colour, nickel, chrome or anodized finishes can be discussed where specified.
A suction-cup coating direction for the selected primer, intermediate or finishing task. Nozzle, cup and fluid delivery vary by configuration. Polished, powder-colour, nickel, chrome or anodized finishes can be discussed where specified.
A suction-cup coating direction for the selected primer, intermediate or finishing task. Nozzle, cup and fluid delivery vary by configuration. Polished, powder-colour, nickel, chrome or anodized finishes can be discussed where specified.
A suction-cup coating direction for the selected primer, intermediate or finishing task. Nozzle, cup and fluid delivery vary by configuration. Polished, powder-colour, nickel, chrome or anodized finishes can be discussed where specified.
A suction-cup coating direction for the selected primer, intermediate or finishing task. Nozzle, cup and fluid delivery vary by configuration. Polished, powder-colour, nickel, chrome or anodized finishes can be discussed where specified.
A suction-feed direction for selected wall, fence and undercoat tasks. Body structure, cup and nozzle options remain paired with the actual configuration and material trial.
A suction-feed direction for selected wall, fence and undercoat tasks. Body structure, cup and nozzle options remain paired with the actual configuration and material trial.
A suction-feed direction for selected wall, fence and undercoat tasks. Body structure, cup and nozzle options remain paired with the actual configuration and material trial.
A suction-feed direction for selected wall, fence and undercoat tasks. Body structure, cup and nozzle options remain paired with the actual configuration and material trial.
A suction-feed direction for selected wall, fence and undercoat tasks. Body structure, cup and nozzle options remain paired with the actual configuration and material trial.
A suction-feed direction for selected wall, fence and undercoat tasks. Body structure, cup and nozzle options remain paired with the actual configuration and material trial.
A small-cup direction for local touch-up, craft and model finishing. Feed arrangement and nozzle must be approved for the selected configuration; cup capacity and fluid delivery are item-specific.
A small-cup direction for local touch-up, craft and model finishing. Feed arrangement and nozzle must be approved for the selected configuration; cup capacity and fluid delivery are item-specific.
A small-cup direction for local touch-up, craft and model finishing. Feed arrangement and nozzle must be approved for the selected configuration; cup capacity and fluid delivery are item-specific.
A small-cup direction for local touch-up, craft and model finishing. Feed arrangement and nozzle must be approved for the selected configuration; cup capacity and fluid delivery are item-specific.
A die-cast aluminium gun combines with a handled plastic or aluminium hopper and adjustable material feed. Separate hopper capacities and nozzle sets serve different texture requirements.
A die-cast aluminium gun combines with a handled plastic or aluminium hopper and adjustable material feed. Separate hopper capacities and nozzle sets serve different texture requirements.
A die-cast aluminium gun combines with a handled plastic or aluminium hopper and adjustable material feed. Separate hopper capacities and nozzle sets serve different texture requirements.
A die-cast aluminium gun combines with a handled plastic or aluminium hopper and adjustable material feed. Separate hopper capacities and nozzle sets serve different texture requirements.
A seamless steel pot direction includes a regulator, safety valve, outlet and fluid connection, with conversion-treated surface options. Standalone pots and gun/hose assemblies require their actual pressure and thread drawings.
Suction hoses, pick-up tools, cup arrangements, flexible wands and recycling accessories address different cleaning tasks. Confirm abrasive/media size, nozzle geometry, extraction and the actual operating file.
A seamless steel pot direction includes a regulator, safety valve, outlet and fluid connection, with conversion-treated surface options. Standalone pots and gun/hose assemblies require their actual pressure and thread drawings.
A seamless steel pot direction includes a regulator, safety valve, outlet and fluid connection, with conversion-treated surface options. Standalone pots and gun/hose assemblies require their actual pressure and thread drawings.
Gravity, side-cup, suction, fixed or adjustable control directions provide different detail-painting configurations. Keep the selected needle/nozzle, cup, air inlet and working pressure together.
Gravity, side-cup, suction, fixed or adjustable control directions provide different detail-painting configurations. Keep the selected needle/nozzle, cup, air inlet and working pressure together.
Gravity, side-cup, suction, fixed or adjustable control directions provide different detail-painting configurations. Keep the selected needle/nozzle, cup, air inlet and working pressure together.
Gravity, side-cup, suction, fixed or adjustable control directions provide different detail-painting configurations. Keep the selected needle/nozzle, cup, air inlet and working pressure together.
Gravity, side-cup, suction, fixed or adjustable control directions provide different detail-painting configurations. Keep the selected needle/nozzle, cup, air inlet and working pressure together.
Gravity, side-cup, suction, fixed or adjustable control directions provide different detail-painting configurations. Keep the selected needle/nozzle, cup, air inlet and working pressure together.
Suction hoses, pick-up tools, cup arrangements, flexible wands and recycling accessories address different cleaning tasks. Confirm abrasive/media size, nozzle geometry, extraction and the actual operating file.
A seamless steel pot direction includes a regulator, safety valve, outlet and fluid connection, with conversion-treated surface options. Standalone pots and gun/hose assemblies require their actual pressure and thread drawings.
Suction hoses, pick-up tools, cup arrangements, flexible wands and recycling accessories address different cleaning tasks. Confirm abrasive/media size, nozzle geometry, extraction and the actual operating file.
Suction hoses, pick-up tools, cup arrangements, flexible wands and recycling accessories address different cleaning tasks. Confirm abrasive/media size, nozzle geometry, extraction and the actual operating file.
Suction hoses, pick-up tools, cup arrangements, flexible wands and recycling accessories address different cleaning tasks. Confirm abrasive/media size, nozzle geometry, extraction and the actual operating file.
Suction hoses, pick-up tools, cup arrangements, flexible wands and recycling accessories address different cleaning tasks. Confirm abrasive/media size, nozzle geometry, extraction and the actual operating file.
Gravity and suction forms have separate cup, nozzle, fan and fluid delivery references. Compare finish, air demand and round/flat pattern needs for the selected coating task.
Gravity and suction forms have separate cup, nozzle, fan and fluid delivery references. Compare finish, air demand and round/flat pattern needs for the selected coating task.
Gravity and suction forms have separate cup, nozzle, fan and fluid delivery references. Compare finish, air demand and round/flat pattern needs for the selected coating task.
Gravity and suction forms have separate cup, nozzle, fan and fluid delivery references. Compare finish, air demand and round/flat pattern needs for the selected coating task.
Gravity and suction forms have separate cup, nozzle, fan and fluid delivery references. Compare finish, air demand and round/flat pattern needs for the selected coating task.
Gravity and suction forms have separate cup, nozzle, fan and fluid delivery references. Compare finish, air demand and round/flat pattern needs for the selected coating task.
Inflate, check and release tyre pressure using the selected mechanical or digital gauge configuration. Shock sleeves, hose, chuck and handle construction vary; calibration requirements belong in the order brief.
Inflate, check and release tyre pressure using the selected mechanical or digital gauge configuration. Shock sleeves, hose, chuck and handle construction vary; calibration requirements belong in the order brief.
Inflate, check and release tyre pressure using the selected mechanical or digital gauge configuration. Shock sleeves, hose, chuck and handle construction vary; calibration requirements belong in the order brief.
Long-nozzle, cup and flexible pickup directions provide access for workshop cleaning. Select the actual fluid compatibility, nozzle reach, air regulator and container connection.
Long-nozzle, cup and flexible pickup directions provide access for workshop cleaning. Select the actual fluid compatibility, nozzle reach, air regulator and container connection.
Long-nozzle, cup and flexible pickup directions provide access for workshop cleaning. Select the actual fluid compatibility, nozzle reach, air regulator and container connection.
Long-nozzle, cup and flexible pickup directions provide access for workshop cleaning. Select the actual fluid compatibility, nozzle reach, air regulator and container connection.
Long-nozzle, cup and flexible pickup directions provide access for workshop cleaning. Select the actual fluid compatibility, nozzle reach, air regulator and container connection.
Long-nozzle, cup and flexible pickup directions provide access for workshop cleaning. Select the actual fluid compatibility, nozzle reach, air regulator and container connection.
Composite-grip and metal-nozzle layouts provide different reach for equipment and workspace cleaning. Keep nozzle diameter, length and air-pressure reference paired with the actual configuration.
Composite-grip and metal-nozzle layouts provide different reach for equipment and workspace cleaning. Keep nozzle diameter, length and air-pressure reference paired with the actual configuration.
Composite-grip and metal-nozzle layouts provide different reach for equipment and workspace cleaning. Keep nozzle diameter, length and air-pressure reference paired with the actual configuration.
Composite-grip and metal-nozzle layouts provide different reach for equipment and workspace cleaning. Keep nozzle diameter, length and air-pressure reference paired with the actual configuration.
Composite-grip and metal-nozzle layouts provide different reach for equipment and workspace cleaning. Keep nozzle diameter, length and air-pressure reference paired with the actual configuration.
Composite-grip and metal-nozzle layouts provide different reach for equipment and workspace cleaning. Keep nozzle diameter, length and air-pressure reference paired with the actual configuration.
Configured painting, blowing, washing and inflation assortments combine selected guns and an air hose. Specify each component, cup, nozzle and fitting before approving the pack bill.
Configured painting, blowing, washing and inflation assortments combine selected guns and an air hose. Specify each component, cup, nozzle and fitting before approving the pack bill.
Configured painting, blowing, washing and inflation assortments combine selected guns and an air hose. Specify each component, cup, nozzle and fitting before approving the pack bill.
The referenced case contains an impact wrench, ten sockets (9, 10, 11, 13, 14, 17, 19, 22, 24 and 27 mm), a 125 mm extension, 4 mm hex key, oil pot, mini oiler, nipple and moulded case. Case presentation counts toward the stated assortment.
The referenced case contains an impact wrench, ten sockets (9, 10, 11, 13, 14, 17, 19, 22, 24 and 27 mm), a 125 mm extension, 4 mm hex key, oil pot, mini oiler, nipple and moulded case. Case presentation counts toward the stated assortment.
A ratchet is combined with seven sockets (9, 10, 11, 13, 14, 17 and 19 mm), 75 mm extension, universal joint, 30 mm cross-head bits #2/#3, 30 mm slotted 5.5 mm bit, holder, oil pot, nipple and moulded case.
A mini grinder is combined with two spanners, five nominal 3 mm-shank stones, five nominal 6 mm-shank stones, a 3 mm collet, nipple and moulded case. Approve the actual collet and attachment rating.
Configured painting, blowing, washing and inflation assortments combine selected guns and an air hose. Specify each component, cup, nozzle and fitting before approving the pack bill.
Configured painting, blowing, washing and inflation assortments combine selected guns and an air hose. Specify each component, cup, nozzle and fitting before approving the pack bill.
Configured painting, blowing, washing and inflation assortments combine selected guns and an air hose. Specify each component, cup, nozzle and fitting before approving the pack bill.
The configuration combines an impact wrench and ratchet with ten sockets (9, 10, 11, 13, 14, 17, 19, 22, 24 and 27 mm), 4 mm hex key, oil pot, mini oiler, nipple and moulded case. The two tools retain separate ratings.
Aluminium body-saw directions use selected front or rear exhaust, safety trigger and toothed blade. The combined saw/file configuration provides a separate shaping option.
Aluminium body-saw directions use selected front or rear exhaust, safety trigger and toothed blade. The combined saw/file configuration provides a separate shaping option. The selected tool also provides a file direction.
Nineteen hardened-steel needles provide a surface-removal direction for weld residue, rust, paint and irregular surfaces. Housing, optional grip and needle retention require the selected configuration. The selected housing is aluminium.
Nineteen hardened-steel needles provide a surface-removal direction for weld residue, rust, paint and irregular surfaces. Housing, optional grip and needle retention require the selected configuration. Housing material is specified in the selected configuration approval.
Straight and pistol layouts use aluminium housings and hardened-steel cutting components. Match the selected blade, metal thickness, exhaust and cutting path to the actual job. This is the straight, front-exhaust arrangement.
Straight and pistol layouts use aluminium housings and hardened-steel cutting components. Match the selected blade, metal thickness, exhaust and cutting path to the actual job. This is the pistol, handle-exhaust arrangement.
An adjustable-die aluminium tool provides a sheet-cutting direction. Confirm the actual punch/die geometry, sheet material and thickness before trial.
Pump rods have distinct pressure ratios, delivery references, reach and mass. Specify the matching barrel, follower plate, grease, hose and dispensing gun as a complete lubrication system.
Pump rods have distinct pressure ratios, delivery references, reach and mass. Specify the matching barrel, follower plate, grease, hose and dispensing gun as a complete lubrication system.
A long-reach pump direction for appropriate light oils. The transfer fluid and actual pressure-ratio/output relationship require approval for the selected assembly.
Pump rods have distinct pressure ratios, delivery references, reach and mass. Specify the matching barrel, follower plate, grease, hose and dispensing gun as a complete lubrication system.
Pump rods have distinct pressure ratios, delivery references, reach and mass. Specify the matching barrel, follower plate, grease, hose and dispensing gun as a complete lubrication system.
Pump rods have distinct pressure ratios, delivery references, reach and mass. Specify the matching barrel, follower plate, grease, hose and dispensing gun as a complete lubrication system.
Steel or aluminium body choices combine with selected valve, trigger and finish constructions. Fluid pressure limits identify specific configurations and are separate from a pneumatic pump air inlet.
Steel or aluminium body choices combine with selected valve, trigger and finish constructions. Fluid pressure limits identify specific configurations and are separate from a pneumatic pump air inlet.
Steel or aluminium body choices combine with selected valve, trigger and finish constructions. Fluid pressure limits identify specific configurations and are separate from a pneumatic pump air inlet.
Steel or aluminium body choices combine with selected valve, trigger and finish constructions. Fluid pressure limits identify specific configurations and are separate from a pneumatic pump air inlet.
Steel or aluminium body choices combine with selected valve, trigger and finish constructions. Fluid pressure limits identify specific configurations and are separate from a pneumatic pump air inlet. The trigger is ADC12 aluminium; it is not described as the air-valve material.
Selected configurations provide a swivel inlet, handle filter, enclosed needle, adjustable/locked trigger and reversible cleaning-tip direction. Forged/cast construction and extension arrangements are item-specific. A die-cast body, reversible cleaning tip and adjustable trigger are specified.
Selected configurations provide a swivel inlet, handle filter, enclosed needle, adjustable/locked trigger and reversible cleaning-tip direction. Forged/cast construction and extension arrangements are item-specific. A forged/stamped anodized aluminium body, trigger lock and reversible tip are specified.
Selected configurations provide a swivel inlet, handle filter, enclosed needle, adjustable/locked trigger and reversible cleaning-tip direction. Forged/cast construction and extension arrangements are item-specific. An enclosed needle construction is specified.
Selected configurations provide a swivel inlet, handle filter, enclosed needle, adjustable/locked trigger and reversible cleaning-tip direction. Forged/cast construction and extension arrangements are item-specific. A die-cast construction is specified.
Selected configurations provide a swivel inlet, handle filter, enclosed needle, adjustable/locked trigger and reversible cleaning-tip direction. Forged/cast construction and extension arrangements are item-specific. An enclosed needle construction is specified. An extension-rod arrangement is specified.
A pump-and-barrel assembly for vehicle, machinery and workshop lubrication. Keep pump ratio, output, barrel, follower plate and hose matched to the selected grease and operating conditions.
Inflate, check and release tyre pressure using the selected mechanical or digital gauge configuration. Shock sleeves, hose, chuck and handle construction vary; calibration requirements belong in the order brief.
Inline and angled layouts offer different reach, chuck and speed choices. Select the stated reversible or non-reversible action and exact keyed or optional keyless chuck for the job. The stated housing is die-cast aluminium; an optional keyless chuck requires the selected version. The selected drill is non-reversible.
Inflate, check and release tyre pressure using the selected mechanical or digital gauge configuration. Shock sleeves, hose, chuck and handle construction vary; calibration requirements belong in the order brief.
A compact impact mechanism provides a short-body fastening direction. Select the actual drive, torque reference, air demand and forward/reverse arrangement for the assembly space. The housing is aluminium, with front exhaust, reverse control, regulator and optional soft grip.
A rocking-dog impact mechanism offers separate drive, body and torque configurations. Approve the actual tool identification, air supply and fastening setup; ratings remain configuration-specific. The selected rocking-dog direction requires its own current configuration file.
A rocking-dog impact mechanism offers separate drive, body and torque configurations. Approve the actual tool identification, air supply and fastening setup; ratings remain configuration-specific. The selected rocking-dog direction requires its own current configuration file.
A rocking-dog impact mechanism offers separate drive, body and torque configurations. Approve the actual tool identification, air supply and fastening setup; ratings remain configuration-specific. The selected rocking-dog direction requires its own current configuration file.
Inline, miniature, extended and angled layouts provide different deburring and finishing access. Select the actual collet option, housing, exhaust, safety trigger and attachment speed rating. A composite housing and rotating rear exhaust are specified.
Inline, miniature, extended and angled layouts provide different deburring and finishing access. Select the actual collet option, housing, exhaust, safety trigger and attachment speed rating. A composite housing and rotating rear exhaust are specified. A 90-degree head is specified.
Inline, miniature, extended and angled layouts provide different deburring and finishing access. Select the actual collet option, housing, exhaust, safety trigger and attachment speed rating. An aluminium housing and safety trigger are specified.
A compact cutting direction combines an air motor, trigger and steel guard. Exhaust and handle layouts vary. Match wheel dimensions, arbor and marked operating limits to the selected tool. A composite housing and rotating rear exhaust are specified.
A powered air-and-gun arrangement provides spraying without a separate workshop compressor. Detachable nozzles, selected plastic or aluminium gun construction, cup and supply ratings vary by configuration.
Gravity, side-cup, suction, fixed or adjustable control directions provide different detail-painting configurations. Keep the selected needle/nozzle, cup, air inlet and working pressure together.
Suction hoses, pick-up tools, cup arrangements, flexible wands and recycling accessories address different cleaning tasks. Confirm abrasive/media size, nozzle geometry, extraction and the actual operating file.
Gravity and suction forms have separate cup, nozzle, fan and fluid delivery references. Compare finish, air demand and round/flat pattern needs for the selected coating task.
Gravity and suction forms have separate cup, nozzle, fan and fluid delivery references. Compare finish, air demand and round/flat pattern needs for the selected coating task.
Gravity and suction forms have separate cup, nozzle, fan and fluid delivery references. Compare finish, air demand and round/flat pattern needs for the selected coating task.
Inflate, check and release tyre pressure using the selected mechanical or digital gauge configuration. Shock sleeves, hose, chuck and handle construction vary; calibration requirements belong in the order brief.
Inflate, check and release tyre pressure using the selected mechanical or digital gauge configuration. Shock sleeves, hose, chuck and handle construction vary; calibration requirements belong in the order brief.
Inflate, check and release tyre pressure using the selected mechanical or digital gauge configuration. Shock sleeves, hose, chuck and handle construction vary; calibration requirements belong in the order brief.
Long-nozzle, cup and flexible pickup directions provide access for workshop cleaning. Select the actual fluid compatibility, nozzle reach, air regulator and container connection.
Long-nozzle, cup and flexible pickup directions provide access for workshop cleaning. Select the actual fluid compatibility, nozzle reach, air regulator and container connection.
Composite-grip and metal-nozzle layouts provide different reach for equipment and workspace cleaning. Keep nozzle diameter, length and air-pressure reference paired with the actual configuration.
Composite-grip and metal-nozzle layouts provide different reach for equipment and workspace cleaning. Keep nozzle diameter, length and air-pressure reference paired with the actual configuration.
Configured painting, blowing, washing and inflation assortments combine selected guns and an air hose. Specify each component, cup, nozzle and fitting before approving the pack bill.
Configured painting, blowing, washing and inflation assortments combine selected guns and an air hose. Specify each component, cup, nozzle and fitting before approving the pack bill.
A pneumatic drill is combined with HSS twist-drill, chuck-key, oiling, air-fitting and case directions. Approve the exact drill-size list and component count for the selected pack.
A pneumatic drill is combined with HSS twist-drill, chuck-key, oiling, air-fitting and case directions. Approve the exact drill-size list and component count for the selected pack.
An air hammer is combined with a spring retainer, oil pot, four 120 mm chisels, nipple and moulded case. Round or hex chisel geometry must match the selected retainer.
A three-part workshop direction combines tyre inflation, an air blower and a recoil hose. Specify the actual chuck, nozzle, hose dimensions and fitting style for the order.
Pump rods have distinct pressure ratios, delivery references, reach and mass. Specify the matching barrel, follower plate, grease, hose and dispensing gun as a complete lubrication system.
Pump rods have distinct pressure ratios, delivery references, reach and mass. Specify the matching barrel, follower plate, grease, hose and dispensing gun as a complete lubrication system.
| Configuration | Ratio | Flow L/min | Output bar | Rod mm | Mass kg |
|---|---|---|---|---|---|
| 1 | 50:1 | 0.85 | 300–400 | 400 | 4.5 |
| 2 | 40:1 | 0.75 | 240–320 | 363 | 4.0 |
Pump rods have distinct pressure ratios, delivery references, reach and mass. Specify the matching barrel, follower plate, grease, hose and dispensing gun as a complete lubrication system.
Fibre-reinforced composite housings and handle exhaust provide compact fastening directions. The miniature pair uses three forward and one reverse setting.
| Configuration | Drive inch | Free speed rpm | Torque Nm | Air demand CFM | Length mm | Mass kg |
|---|---|---|---|---|---|---|
| 1 | 1/2 | 10000 | 400 | 7 | 160 | 1.24 |
| 2 | 3/8 | 10000 | 310 | 7 | 160 | 1.24 |
| 3 | 1/2 | 8500 | 610 | 7 | 180 | 2 |
Twin-hammer and rocking-dog layouts provide separate fastening options. Confirm tool mass and air demand for the selected configuration.
| Configuration | Construction | Drive inch | Free speed rpm | Torque Nm | Length mm |
|---|---|---|---|---|---|
| 1 | Composite twin hammer | 1/2 | 7500 | 500 | 184 |
| 2 | Aluminium rocking dog | 1/2 | 7000 | 312 | 180 |
| 3 | Aluminium twin hammer | 1/2 | 7000 | 610 | 187 |
Single-hammer, butterfly, twin-hammer and larger auxiliary-handle layouts offer distinct access and fastening configurations. Keep each rated reference with its actual tool.
| Configuration | Mechanism | Drive inch | Free speed rpm | Torque Nm | Air demand CFM | Length mm | Mass kg |
|---|---|---|---|---|---|---|---|
| 1 | Single hammer | 3/8 | 10000 | 244 | 4 | 168 | 1.28 |
| 2 | Butterfly rocking dog | 3/8 | 10000 | 102 | 3 | 161 | 0.96 |
| 3 | Twin hammer | 1/2 | 7500 | 680 | 7 | 186 | 2.63 |
| 4 | Composite twin hammer | 1/2 | 7000 | 800 | 5 | 197 | 2.42 |
| 5 | Twin hammer, auxiliary handle | 3/4 | 4000 | 1600 | 9 | 234 | 5.91 |
| 6 | Twin hammer, auxiliary handle | 1 | 4000 | 1600 | 9 | 236 | 5.94 |
| 7 | Twin hammer | 1/2 | 7000 | 610 | 6 | 180 | 2.48 |
| 8 | Twin hammer | 1/2 | 6500 | 750 | 6 | 190 | 2.59 |
An auxiliary handle and front-exhaust aluminium layout serve heavy fastening access. Select the actual socket and air-line arrangement.
| Configuration | Drive inch | Free speed rpm | Torque Nm | Air demand CFM | Length mm | Mass kg |
|---|---|---|---|---|---|---|
| 1 | 3/4 | 4600 | 1600 | 9 | 245 | 7.6 |
| 2 | 1 | 4600 | 1600 | 9 | 240 | 7.65 |
An extended pinless-hammer layout provides a long-anvil fastening direction. Socket choices and actual bolt requirements must be confirmed separately.
| Configuration | Free speed rpm | Torque Nm | Air demand CFM | Stated bolt reference mm | Mass kg |
|---|---|---|---|---|---|
| 1 | 3600 | 3260 | 18 | 34 | 18.5 |
| 2 | 3300 | 4180 | 18 | 40 | 20 |
| 3 | 3300 | 3800 | 18 | 36 | 19 |
| 4 | 3800 | 2980 | 17 | 32 | 17.5 |
A single-pawl head, three-gear planetary direction and rotating rear exhaust combine with composite housing. Fixed-plug and adjustable-inlet alternatives require the actual component drawing.
A single-pawl miniature ratchet combines a composite housing, rear rotating exhaust and adjustable inlet.
These are reciprocating blow rates, distinct from motor rotational speeds. Select the correct round/hex chisel and retention arrangement.
| Configuration | Configuration | Blow rate BPM | Stroke mm | Overall length mm | Mass kg |
|---|---|---|---|---|---|
| 1 | Composite nominal 150 mm | 4500 | 43 | 151 | 1.06 |
| 2 | Aluminium nominal 150 mm | 4500 | 43 | 151 | 1.45 |
| 3 | Aluminium nominal 190 mm | 3500 | 66 | 191 | 1.75 |
| 4 | Aluminium nominal 250 mm | 2200 | 90 | 235 | 1.77 |
Aluminium drill layouts provide separate speed and chuck combinations. A larger reversible configuration includes a side-handle direction.
| Configuration | Action | Chuck inch | Free speed rpm | Length mm | Mass kg | Air demand CFM |
|---|---|---|---|---|---|---|
| 1 | Non-reversible angled | 3/8 | 1800 | 193 | 1.11 | 5 |
| 2 | Reversible angled | 3/8 | 1500 | 208 | 1.14 | 4 |
| 3 | Reversible angled | 1/2 | 700 | 212 | 1.4 | 7 |
Inline and angled aluminium housings offer separate reach and exhaust layouts. Optional keyless chucks require the exact holder configuration.
| Configuration | Layout | Chuck inch | Free speed rpm | Length mm | Mass kg | Air demand CFM |
|---|---|---|---|---|---|---|
| 1 | Inline | 3/8 | 20000 | 210 | 0.71 | 4 |
| 2 | Inline | 3/8 | 20000 | 210 | 0.78 | 4 |
| 3 | Angled | 3/8 | 15000 | 170 | 0.64 | 4 |
| 4 | Angled | 3/8 | 15000 | 170 | 0.68 | 4 |
| 5 | Inline | 3/8 | 2500 | 225 | 0.9 | 5 |
| 6 | Inline | 3/8 | 2500 | 225 | 1.0 | 5 |
A composite housing, rotating rear exhaust and adjustable inlet form an inline deburring direction.
Short-body and extended-tube directions provide different reach. Rear, rotating rear or front exhaust depends on the selected configuration.
| Configuration | Layout | Free speed rpm | Length mm | Mass kg |
|---|---|---|---|---|
| 1 | Inline | 25000 | 179 | 0.75 |
| 2 | Mini rear exhaust | 25000 | 157 | 0.41 |
| 3 | Mini rotating rear exhaust | 25000 | 165 | 0.46 |
| 4 | Super-mini front exhaust | 25000 | 120 | 0.37 |
| 5 | 1-inch extension | 20000 | 205 | 0.54 |
| 6 | 1-inch extension | 20000 | 210 | 0.60 |
| 7 | 3-inch extension | 20000 | 240 | 0.61 |
| 8 | 3-inch extension | 20000 | 245 | 0.65 |
| 9 | 5-inch extension | 20000 | 285 | 0.70 |
| 10 | 5-inch extension | 20000 | 295 | 0.75 |
The extractor uses a battery, while the sanding tool still requires compressed air. The set includes an extraction pipe, sanding sheets, oil pot, nipple and instructions.
Non-vacuum, central extraction and self-collection arrangements have separate lengths and pad sizes. A balance-shaft alternative is available only with its exact component bill.
| Configuration | Extraction | Pad mm | Length mm | Mass kg |
|---|---|---|---|---|
| 1 | None | 150 | 170 | 0.95 |
| 2 | None | 127 | 158 | 0.92 |
| 3 | Central | 150 | 200 | 0.96 |
| 4 | Central | 127 | 188 | 0.94 |
| 5 | Self-collection | 150 | 214 | 0.98 |
| 6 | Self-collection | 127 | 202 | 0.95 |
PA6/TPE housing and grip directions combine with dust-cover and trigger details. Keep non-vacuum, central and bag/hose extraction variants distinct.
| Configuration | Extraction | Pad mm | Free speed rpm | Length mm | Mass kg |
|---|---|---|---|---|---|
| 1 | None | 150 | 10500 | 170 | 0.87 |
| 2 | None | 127 | 10500 | 158 | 0.84 |
| 3 | Central | 150 | 10500 | 200 | 0.88 |
| 4 | Central | 127 | 10500 | 188 | 0.86 |
| 5 | Self-collection | 150 | 10500 | confirm | 0.90 |
| 6 | Self-collection | 127 | 10500 | 202 | 0.87 |
| 7 | None | 150 | 10000 | 160 | 0.94 |
| 8 | None | 127 | 10000 | 148 | 0.91 |
Self-collection, miniature orbital, reversible and rear/angled arrangements offer separate small-area finishing directions. Dimensions follow the selected approved drawing.
| Configuration | Direction | Pad reference | Free speed rpm | Length mm | Mass kg |
|---|---|---|---|---|---|
| 1 | Self-collection composite | 150 mm | 10000 | 160 | 1.07 |
| 2 | Self-collection composite | 127 mm | 10000 | 148 | 1.03 |
| 3 | Aluminium miniature orbital | nominal 3 inch / 75 mm | 11000 | 130 | 0.68 |
| 4 | Plastic miniature orbital | nominal 3 inch / 75 mm | 11000 | 130 | 0.65 |
| 5 | Reversible composite | 2 or 3 inch | 16000 | 153 | 0.66 |
| 6 | Orbital composite | 2 or 3 inch | 16000 | 153 | 0.66 |
| 7 | Miniature angle | 2 inch | 15000 | confirm | 0.62 |
| 8 | Rear angled | 3 inch | 5000 | confirm | 0.65 |
| 9 | Rear angled | 3 inch | 3200 | confirm | 0.65 |
| 10 | High-speed angled | confirm | 20000 | 204 | 0.56 |
| 11 | Orbital angled | 2 inch / 50.8 mm | 20000 | 195 | 0.65 |
Blow/stroke rates below come from the reciprocating-tool schedule. Sheet thicknesses are material-specific; cutter-pole diameter is a separate dimension.
| Configuration | Direction | Stated rate BPM | Material or attachment reference |
|---|---|---|---|
| 1 | Body saw | 9000 | selected 24/32-tooth blade |
| 2 | Body saw/file | 5000 | selected 24-tooth blade |
| 3 | Needle scaler | 4500 | 19 needles |
| 4 | Needle scaler | 4000 | 19 needles |
| 5 | Straight metal shear | 2500 | steel 1.2 mm / aluminium 1.4 mm |
| 6 | Pistol metal shear | 1800 | steel 1.2 mm / aluminium 1.4 mm |
| 7 | Pull nibbler | 3600 | steel 0.5–1.2 mm, cutter pole 4.5 mm |
| 8 | Pull nibbler alternate | confirm | cutter pole 6 mm |
A steel C-frame, adjustable anvil height and guarded cast-aluminium foot pedal provide a panel forming and weld-planishing direction. Approve the actual workpiece and tooling.
Impact wrench, ratchet, ten metric sockets, 4 mm hex key, oil pot, mini oiler, nipple and moulded case.
A miniature die grinder is combined with Two spanners; five nominal 3 mm-shank stones; five nominal 6 mm-shank stones; 3 mm collet; nipple; moulded case.
An inline die grinder is combined with Two spanners; five nominal 3 mm-shank stones; five nominal 6 mm-shank stones; 3 mm collet; nipple; moulded case.
Impact wrench, ten sockets, 125 mm extension, 4 mm hex key, oil pot, nipple and fitted case.
Half-inch ratchet, seven sockets, 75 mm extension, universal joint, oil pot, nipple and fitted case.
An inline grinder, plastic fixing block and Two spanners; five nominal 3 mm-shank stones; five nominal 6 mm-shank stones; 3 mm collet; nipple; moulded case.
A nominal 150 mm air hammer, spring retainer, three 120 mm hex chisels, two 170 mm hex chisels, oil pot, nipple and case.
An impact wrench, dual-action sander, air hammer, inline grinder and reversible air drill are combined with sanding, grinding, chiselling and driving accessories. Component bill approval is required.
Impact wrench, ratchet, air hammer and mini blower are combined with socket/bit, inflation and hose-connection accessories.
A die grinder, impact wrench, ratchet and air hammer are combined with socket, grinding, chiselling and air-connection components.
An angled grinder is combined with nominal 3/6 mm mounted stones, 3 mm collet, nipple, two spanners and case.
A selected twin-hammer wrench, 125 mm extension, ten metric sockets, mini oiler, 5 mm hex key, oil pot, nipple and case.
A reversible drill is supplied with auxiliary handle, copper handle ring, chuck key, male nipple and case.
An impact wrench, mini grinder and mini blower are combined with inflation, sanding and socket components.
Impact wrench, hammer, grinder, ratchet and mini blower are combined with socket, sanding and inflation components. Exact quantities require the approved bill.
Ratchet, hammer, die grinder, impact wrench, dual-action sander and mini blower combine with grinding, sanding, socket and air accessories.
Impact wrench, hammer, ratchet, die grinder, full-size blower and mini blower are combined with sanding, grinding and air accessories.
Impact wrench with eight sockets, oil pot, 5 mm hex key, nipple and moulded case.
A nominal 190 mm hammer, spring retainer, five 170 mm chisels, air plug, mini oiler and moulded case.
An angled die grinder combines mounted stones, collets, stripping discs, backing pads and holders. Blister-in-box and moulded-case presentations are separate.
Blower, inflator, impact wrench, mini grinder, air hose and accessories form a workshop service assortment.
A mini grinder, mini oiler, ten nominal 3 mm-shank stones, two female plugs, oil pot, two spanners and case.
A composite inline grinder is combined with Two spanners; five nominal 3 mm-shank stones; five nominal 6 mm-shank stones; 3 mm collet; nipple; moulded case.
A composite mini grinder is combined with two spanners, five stones of each nominal 3/6 mm shank, 3 mm collet, male air plug and case.
A composite impact wrench, ten metric sockets, 125 mm extension, 4 mm hex key, oil pot, mini oiler, nipple and case.
A compact impact wrench, ten metric sockets, 125 mm extension, oil pot, mini oiler, nipple, PTFE tape and moulded case.
A composite ratchet is combined with seven sockets, 75 mm extension, universal joint, #2/#3 cross-head bits, 5.5 mm slotted bit, holder, oil pot, nipple and case.
A composite nominal 150 mm hammer, retainer, oil pot, mini oiler, four 120 mm chisels, nipple and case.
An impact wrench, 125 mm extension, oil pot, hex key and nipple form a socket-assortment direction. Socket quantity and exact list require approved bill confirmation.
A composite twin-hammer wrench combines ten sockets, 125 mm extension, mini oiler, hex key, oil pot and nipple.
Separate three-quarter-inch and one-inch wrench directions combine four sockets, oil pot, hex key and nipple. Approve the actual case and component-count convention.
A dual-guide arrangement, integrated muffler/reversing valve, ceramic-coated plunger, ceramic sleeve and changeable cleaning/spraying valve provide a large-area coating direction.
An LCD spray-quantity direction, air/fluid filters, lubricator and removable stainless fluid section support configured painting and cleaning. Pressure ratings follow the selected complete assembly file.
A forged-body handgun direction combines with carbide nozzle/tip and swivel connection options. Confirm the thread, tip and marked pressure of every joined part.
Separate portable diaphragm configurations combine a selected gun, tip, hose, lance, suction pipe and gauge. Approve the motor type and supply configuration.
| Configuration | Power W | Fluid delivery L/min | Maximum pressure bar | Tip | Hose m | Machine mass kg |
|---|---|---|---|---|---|---|
| 1 | 1300 | 5 | 200 | 517 | 10 | 20 |
| 2 | 1300 | 5 | 200 | 517 | 10 | 20 |
Compact electric airless configurations have separate motor, tip and delivery references.
| Configuration | Power W | Pressure PSI | Fluid delivery L/min | Tip | Machine mass kg |
|---|---|---|---|---|---|
| 1 | 650 | 2500 | 1.1 | 515 | 6.9 |
| 2 | 1000 | 2400 | 1.4 | 517 | 7.1 |
Brushed or brushless motor directions pair with stainless-plunger and selected ceramic-pump alternatives. A complete set can include gun, reversible tip, lance, suction/return pipe, residue cup and instructions.
| Configuration | Motor | Power W | Delivery L/min | Tip directions | Mass kg |
|---|---|---|---|---|---|
| 1 | Brushed | 900 | 1.8 | 515 / 517 / 519 | 20 |
| 2 | Brushed | 1000 | 2.0 | 515 / 517 / 519 | 22 |
| 3 | Brushless | 1500 | 2.3 | 515 / 517 / 519 / 521 / 523 | 22 |
| 4 | Brushless | 2200 | 3.0 | 515 / 517 / 519 / 521 / 523 / 525 | 25 |
A brushless battery sprayer combines a small storage tank and short hose. Pressure and flow identify this separately documented configuration, subject to current operating approval.
Die-cast aluminium constructions combine stainless needle/nozzle and selected brass-cap/clamp arrangements. Miniature and full-size configurations retain separate air and fluid requirements.
| Configuration | Cup ml | Nozzle directions mm | Fluid ml/min | Air demand SCFM | Working inlet | Fan mm | Mass g |
|---|---|---|---|---|---|---|---|
| 1 | 600 | 1.4 / 1.7 / 2 | 160–240 | 6–10 | 30–35 PSI | 180–260 | 606 |
| 2 | 100 | 0.8 / 1 | 30–80 | 1–4 | 22 PSI | 80–130 | 306 |
| 3 | 600 | 1.3 | 220–240 | 5–10 | 1.5–2 bar | 280–300 | confirm |
Stainless needle/nozzle and selected brass air-cap directions offer gravity and suction variants. Keep cup and flow paired with the actual feed arrangement.
| Configuration | Feed | Cup ml | Nozzle directions mm | Fluid ml/min | Air demand SCFM | Working pressure PSI | Mass kg |
|---|---|---|---|---|---|---|---|
| 1 | Gravity | 400 | 1 / 1.3 / 1.5 / 1.8 | 110–220 | 6–10 | 43–50 | 0.682 |
| 2 | Suction | confirm | 1 / 1.3 / 1.5 / 1.8 | 95–195 | 3–8 | 43 | 0.710 |
| 3 | Gravity | 350 | 1.3 / 1.5 | 130–210 | 4–9 | 43 | 0.72 |
| 4 | Suction | 650 | 1.3 / 1.5 | 100–180 | 4–9 | 43 | 0.72 |
Distinct cup/feed directions use selected stainless needle/nozzle and metal or plated body finishes.
| Configuration | Feed | Cup ml | Nozzle directions mm | Fluid ml/min | Air demand SCFM | Working pressure PSI | Mass kg |
|---|---|---|---|---|---|---|---|
| 1 | Gravity | 600 | 1.3 / 1.5 / 1.7 | 130–210 | 6–10 | 43 | 0.42 |
| 2 | Suction | 650 | 1.3 / 1.5 / 1.7 | 100–180 | 6–10 | 43 | 0.63 |
| 3 | Gravity HVLP | 600 | 1.4 / 1.7 / 2 | 150–310 | 6–10 | 30–43 | 0.660 |
| 4 | Suction HVLP | 1000 | 1.4 / 1.7 / 2 | 140–270 | 6–10 | 43–50 | 0.920 |
Selected polished, coated or plated constructions support gravity and suction paint-feed directions.
| Configuration | Feed | Cup ml | Nozzle directions mm | Fluid ml/min | Air demand SCFM | Working pressure PSI | Mass kg |
|---|---|---|---|---|---|---|---|
| 1 | Gravity | 600 | 1.5 / 1.7 / 2 | 150–230 | 6–10 | 43 | 0.49 |
| 2 | Suction | 1200 | 1.5 / 1.7 / 2 | 170–250 | 6–10 | 43 | 0.75 |
A die-cast body and stainless needle/nozzle direction combine with separate full-size and detail cups.
| Configuration | Cup ml | Nozzle directions mm | Fluid ml/min | Air demand SCFM | Working pressure bar | Fan mm |
|---|---|---|---|---|---|---|
| 1 | 600 | 1.4 / 1.7 | 190–240 | 5–10 | 3 | 180–240 |
| 2 | 100 | 0.8 / 1 | 70–130 | 1–4 | 2 | 80–130 |
A suction-feed configuration with a separately specified nozzle range and fluid-delivery reference.
Separate gravity and suction forms provide distinct cup, nozzle-range, fluid-delivery and pressure combinations.
| Configuration | Feed | Cup ml | Standard nozzle mm | Optional range mm | Fluid ml/min | Working pressure PSI | Mass kg |
|---|---|---|---|---|---|---|---|
| 1 | Gravity | 600 | 1.8 | 1.4–2.5 | 200–300 | 43 | 0.64 |
| 2 | Gravity | 600 | 1.8 | 1.4–2.5 | 200–300 | 43 | 0.64 |
| 3 | Gravity | 600 | 1.8 | 1.2–3 | 200–300 | 43 | 0.63 |
| 4 | Suction | 1000 | 1.8 | 1.2–3 | 170–270 | 50 | 0.82 |
| 5 | Gravity | 600 | 1.8 | 1.2–3 | 200–300 | 43 | 0.50 |
| 6 | Gravity | 600 | 1.8 | 1.2–3 | 200–300 | 43 | 0.44 |
| 7 | Suction | 1000 | 1.8 | 1.2–3 | 170–270 | 50 | 0.60 |
| 8 | Suction | 1000 | 1.8 | 1.4–2.5 | 170–270 | 50 | 0.80 |
| 9 | Gravity | 600 | 1.6 | 1.3–2 | 100–190 | 50 | 0.55 |
Distinct gravity and suction configurations keep cup size, nozzle range, air demand and fluid delivery together.
| Configuration | Feed | Cup ml | Nozzle range mm | Fluid ml/min | Air demand CFM | Working pressure PSI | Mass kg |
|---|---|---|---|---|---|---|---|
| 1 | Gravity | 250 | 1.2–2.5 | 160–240 | 2–6 | 36 | 0.56 |
| 2 | Suction | 850 | 1.2–2.5 | 130–210 | 2–6 | 50 | 0.65 |
| 3 | Gravity | 350 | 1.2–2.5 | 160–240 | 3–8 | 50 | 0.66 |
| 4 | Suction | 650 | 1.2–2.5 | 130–210 | 3–8 | 50 | 0.71 |
| 5 | Gravity | 350 | 1.2–2.5 | 160–240 | 3–8 | 50 | 0.59 |
| 6 | Suction | 650 | 1.2–2.5 | 130–210 | 3–8 | 50 | 0.57 |
| 7 | Gravity | 600 | 1.2–2.5 | 130–210 | 6–10 | 43 | confirm |
| 8 | Suction | 650 | 1.2–2.5 | 100–180 | 6–10 | 43 | confirm |
| 9 | Gravity | 350 | 1.5–3 | 160–250 | 3–8 | 50 | 0.75 |
| 10 | Suction | 1000 | 1.5–3 | 130–220 | 3–8 | 50 | 0.92 |
| 11 | Gravity | 350 | 1.5–3 | 160–250 | 3–8 | 50 | 0.55 |
| 12 | Suction | 1000 | 1.3–3 | 130–220 | 3–8 | 50 | 0.87 |
| 13 | Gravity | 600 | 1.5 | 160–240 | 4–8 | 43 | 0.68 |
Separate cup and feed alternatives use selected conventional gun structures.
| Configuration | Feed | Cup ml | Standard nozzle mm | Optional nozzle range mm | Fluid ml/min | Air demand CFM | Working pressure PSI | Mass kg |
|---|---|---|---|---|---|---|---|---|
| 1 | Gravity | 600 | 1.5 | 1.2–2.5 | 160–240 | 3–8 | 50 | 0.46 |
| 2 | Gravity | 600 | 1.5 | 1.2–2.5 | 160–240 | 3–8 | 50 | confirm |
| 3 | Suction | 1000 | 1.5 | 1.2–2.5 | 130–210 | 3–8 | 50 | 0.75 |
A separately documented texture-gun set uses three nozzle diameters. Confirm the actual hopper material and feed arrangement with the selected configuration.
One-piece paint tanks combine wheels, lid clamps/gasket, air on/off valve, pressure gauge, regulating valve and automatic-mixing direction. Select the required pressure and mixing file.
| Configuration | Capacity L | Outer carton cm | Carton gross/net kg |
|---|---|---|---|
| 1 | 10 | 32.5 × 33 × 57 | 20 / 15 |
| 2 | 20 | 44.5 × 37.5 × 70.5 | 30 / 25 |
| 3 | 40 | 50.5 × 48.5 × 78.5 | 40 / 33 |
| 4 | 60 | 47.5 × 49.5 × 95 | 50 / 42 |
Separate suspended, stand-mounted and handheld mixing layouts are referenced for paint preparation. Select the vessel, shaft, impeller, air drive and support drawing.
A separate suction-cup configuration provides both fan and round-pattern dimensions.
A gravity gun, nylon cup, regulator, spanner, two plugs, four filters, extra nozzle/needle, three brushes and carry case form a configured finishing pack.
A finishing gun, nylon cup, regulator, spanner, two brushes, plug, filter and aluminium case provide a compact configured pack.
The finishing gun, nylon cup, regulator, spanner, two brushes, plug, filter, hex key, hook and case form a distinct pack.
Spray gun, blower, washing gun, tyre inflator and recoil hose are combined in separate gravity/suction and metal/plastic-cup directions.
A gravity spray gun combines a regulator, spanner and cleaning brush.
Spray gun, blower, cleaning gun, inflator and air-hose directions are arranged in different case/presentation options.
A suction gun, inflator, mini blower, hose, inflation tips, air fittings and cleaning brush form a service assortment. Any included masks require their own intended-use evidence.
A washing gun, paint gun, inflator and blower combine with a coil hose, inflation needle and tapered nozzle.
A gravity gun, regulator, spanner and cleaning-tool direction can be supplied with a selected cup material.
Two full-size HVLP gun directions can be paired with a regulator. A separate version adds a miniature detail gun.
Two full-size guns, one miniature gun, selected cups, regulator and case form a finishing programme. Approve the exact bill and count convention.
One full-size gun, two large cups, one miniature gun with cup and regulator form a separate pack.
A gun and regulator combine with an additional nozzle/cap/needle set, two spanners, brush and connector. Count and exact bill are approved with the sample.
A high-pressure suction gun combines a water filter, four brushes, five wooden picks, cleaning needle and sealing tape.
Two glass jars form a slide-blister replacement-cup pack. Confirm the actual airbrush connection.
Portable aluminium-housing and oil-less compressor directions support selected light spraying and inflation tasks. Choose the actual voltage version, air demand and duty arrangement.
| Configuration | Direction | Supply V | Speed rpm | Stated air flow L/min | Power | Mass kg | Dimensions cm |
|---|---|---|---|---|---|---|---|
| 1 | Portable | 120/230 | 1430 | 22 | 150 W | 4.7 | confirm |
| 2 | Dual-voltage direction | 120/230, selected 127/240 | 1750 | 120 | 350 W | 11.9 | 33.5 × 22.5 × 16.5 |
| 3 | Oil-less | 220–240 | 1450 | 23 | 1/5 HP | 3.6 | 24.5 × 13.5 × 17 |
| 4 | Oil-less | 220–240, selected 110–120 | 1450 | 35 | 1/3 HP | 5.5 | 32 × 13.5 × 20.5 |
| 5 | Oil-less with tank | 220–240 | 1450 | 23 | 1/5 HP | 5.0 | 32 × 16 × 35 |
Separate metal-handle nozzle forms provide different reach for workshop cleaning.
| Configuration | Nozzle diameter mm | Standard length mm |
|---|---|---|
| 1 | 2.0 | 28 |
| 2 | 3.4 | 50.5 |
| 3 | 3.4 | 94 |
| 4 | 2.0 | 26.5 |
| 5 | 3.8 | 108.5 |
| 6 | 3.8 | 215.5 |
| 7 | 2.0 | 26.5 |
| 8 | 2.0 | 26.5 |
| 9 | 2.0 | 26.5 |
| 10 | 3.8 | 125.5 |
Composite-handle blow-gun directions provide three nozzle lengths, with brass-insert and air-demand differences tied to the selected family.
| Configuration | Family | Nozzle diameter mm | Length mm | Air demand CFM |
|---|---|---|---|---|
| 1 | A | 2.5 | 100 | 6.55 |
| 2 | A | 2.5 | 200 | 6.55 |
| 3 | A | 2.5 | 300 | 6.55 |
| 4 | B | 2.5 | 100 | 17.7 |
| 5 | B | 2.5 | 200 | 17.7 |
| 6 | B | 2.5 | 300 | 17.7 |
Separate hanging packs combine blower, needle, tip and air-fitting directions. Match each component to the intended valve and air profile.
A cleaning assortment combines different brush/pick forms with a fine needle and lubricant.
A long hose is combined with quick couplers, tyre chuck, rubber tip, inflation needle, blower and male/female quick nipples. Approve the actual component total with the pack.
Mechanical and digital gauge, dual-head chuck and selected gauge-size alternatives support separate tyre service packs. Confirm range, hose, chuck and calibration needs for the selected item.
Cup washing guns, hose-fed cleaning forms, plastic-cup alternatives and separate air-regulator directions extend the workshop system. Fluid compatibility and actual regulator file are selected per item.
A cartridge applicator provides a separate workshop sealing direction. Match adhesive chemistry, cartridge geometry and air supply.
A brass water-gun direction and professional polyurethane foam/sealing-gun direction are separate from paint and grease equipment. Select actual connection, medium and consumable.
Steel air connections have distinct American, European, Japanese, English and other profile directions. A regional label alone does not establish interchangeability.
One-touch, selected multi-profile, hose-connector, brass tyre-chuck and multi-way distribution directions support air-system configuration. Approve the actual seal, interface and pressure.
Separate chuck, pressure-check and end-connection directions can be coordinated with an inflation programme. Approve gauge range, calibration need, thread and chuck geometry.
PU/PE recoil, PVC straight and flexible braided airbrush directions have separate diameters, lengths and end connections. Do not substitute them solely by nominal size.
| Configuration | Construction | Dimension direction | Length direction |
|---|---|---|---|
| 1 | PU or PE recoil | nominal 1/4 or 3/8 inch | 4, 5, 7.5, 8, 10, 12 or 15 m, selected pack |
| 2 | PVC | nominal 3/8 inch | 10 m |
| 3 | Transparent PVC | ID/OD 6 × 11 mm | 10 or 15 m |
| 4 | Transparent PVC | ID/OD 10 × 14 mm | 15 m |
| 5 | Braided airbrush | ID/OD 4.5 × 7.5 mm | 1.5 m standard, 1.8 or 3 m alternatives |
Additional coil geometries are referenced for different air-system layouts. Select the actual end tails, coil diameter, ID/OD and extension length together.
Mini in-line regulation, aluminium knuckle joint, filter/gauge and other service-connection directions support the selected air line. Actual element and interface depend on the configuration.
PP and PA6 cup constructions offer different thread, translucency and decoration directions. Match the exact gun/cup drawing.
| Configuration | Capacity ml | Material | Connection | Presentation |
|---|---|---|---|---|
| 1 | 100 | PP | female M14 × 1 | white |
| 2 | 100 | PA6 | female M14 × 1 | white |
| 3 | 100 | PP | male 35/64-20 UNF | white |
| 4 | 100 | PA6 | male 35/64-20 UNF | white |
| 5 | 100 | PA6 | female M14 × 1 | translucent, colour decoration |
| 6 | 100 | PP | female M14 × 1 | white, colour decoration |
| 7 | 100 | PP | female M14 × 1 | white, colour decoration |
| 8 | 600 | PP | female G3/8 | white |
| 9 | 600 | PA6 | female G3/8 | white |
| 10 | 600 | PP | male M12 × 1 | white |
| 11 | 600 | PP | male 35/64-20 UNF | white |
| 12 | 600 | PA6 | female G3/8 | translucent, colour decoration |
| 13 | 600 | PP | female G3/8 | white, colour decoration |
| 14 | 600 | PA6 | female G3/8 | white |
| 15 | 600 | PA6 | female G3/8 | white |
| 16 | 600 | PA6 | male M12 × 1 | white |
| 17 | 600 | PA6 | male 35/64-20 UNF | white |
| 18 | 600 | PA6 | female M16 × 1.5 | white |
| 19 | 600 | PA6 | female G3/8 | translucent, colour decoration |
Stretched aluminium and ADC12 die-cast constructions have separate capacity, lid and connector directions. Polished surface references do not establish coating compatibility.
| Configuration | Capacity ml | Body / lid | Connector |
|---|---|---|---|
| 1 | 100 | stretched aluminium / aluminium | male 35/64-20 UNF |
| 2 | 100 | stretched aluminium / plastic | male 35/64-20 UNF |
| 3 | 100 | stretched aluminium / aluminium | female M14 × 1 |
| 4 | 100 | stretched aluminium / plastic | female M14 × 1 |
| 5 | 400 | stretched aluminium / aluminium | male 35/64-20 UNF |
| 6 | 600 | stretched aluminium / aluminium | male 35/64-20 UNF |
| 7 | 600 | stretched aluminium / plastic | male 35/64-20 UNF |
| 8 | 600 | stretched aluminium / aluminium | female G3/8 |
| 9 | 600 | stretched aluminium / plastic | female G3/8 |
| 10 | 600 | stretched aluminium / screw lid with plastic gasket | female G3/8 |
| 11 | 600 | stretched aluminium / screw lid with rubber gasket | female G3/8 |
| 12 | 600 | stretched aluminium / aluminium | male M12 × 1 |
| 13 | 800 | stretched aluminium / aluminium | male 35/64-20 UNF |
| 14 | 1000 | stretched aluminium / aluminium | female G3/8 |
| 15 | 1000 | stretched aluminium / plastic | female G3/8 |
| 16 | 100 | ADC12 aluminium | female G1/4 |
| 17 | 250 | ADC12 aluminium | female G1/4 |
| 18 | 350 | ADC12 aluminium | female G1/4 |
Separate polished and oxidation-treated cups include circular-thread and side-connection closure directions. Select the complete lid, gasket and gun connection.
| Configuration | Capacity ml | Connection | Surface direction |
|---|---|---|---|
| 1 | 650 | female G1/4 | oxidation-treated |
| 2 | 650 | female G1/4 | oxidation-treated |
| 3 | 750 | male circular thread diameter 69 × 6 | polished |
| 4 | 850 | female G1/4 | polished |
| 5 | 1000 | male circular thread diameter 69 × 6 | polished |
| 6 | 1000 | female G3/8 | polished |
| 7 | 1000 | female G3/8 | polished |
| 8 | 1000 | female G3/8 | polished |
| 9 | 1000 | female G3/8 | polished |
| 10 | 1000 | female G3/8 | polished |
| 11 | 1000 | female G3/8 | polished |
| 12 | 1200 | connection drawing required | oxidation-treated |
| 13 | 1200 | connection drawing required | oxidation-treated |
Copper nozzle/needle and detachable cleaning directions combine with soft grips and stepless flow/pattern adjustment. Battery and mains references remain separate.
| Configuration | Power source | Power W | Supply V | Motor rpm | Nozzle directions mm | Fluid ml/min | Cup ml |
|---|---|---|---|---|---|---|---|
| 1 | Battery | 120 | 18 | 40000 | 1 / 1.8 / 2 / 2.5 | 300–400 | 1000 |
| 2 | Mains | 400 | 120 or 230 | 36000 | 1 / 1.5 / 2 / 2.5 | 750–850 | 1000 |
The chain-cartridge brushless direction and rotating-handle dual-supply direction have separate delivery references. Approve grease, battery, charger, nozzle and hose together.
| Configuration | Construction | Voltage V | Maximum pressure PSI | Grease grade direction | Delivery g/min | Capacity cc |
|---|---|---|---|---|---|---|
| 1 | Chain mechanism | 21 | 9000 | 0–3# | 180 | 600 |
| 2 | 90-degree rotating handle | 21 | 9000 | 0–3# | 120 | 600 |
Separate pump-and-barrel assemblies include a spring, plastic follower plate, control gun and 4 m rubber hose. Match the actual barrel and grease.
| Configuration | Barrel capacity L | Rod mm | Barrel height × diameter mm | Follower diameter mm | Net/gross kg | Outer box mm |
|---|---|---|---|---|---|---|
| 1 | 12 | 400 | 330 × 220 | 219 | 12.5 / 13.5 | 360 × 320 × 840 |
| 2 | 30 | 440 | 430 × 315 | confirm | 17 / 18 | 365 × 365 × 840 |
| 3 | 30 | 375 | 370 × 365 | 282 | 20 / 21 | 460 × 460 × 735 |
| 4 | confirm | 440 | confirm | confirm | 17.5 / 18.5 | 400 × 400 × 840 |
Plastic and rubber/steel follower constructions retain separate barrel and pump dimensions. These are assembly references; no diameter substitution is implied.
| Configuration | Rod mm | Barrel height × diameter mm | Follower material / diameter mm | Net/gross kg | Outer box mm |
|---|---|---|---|---|---|
| 1 | 400 | 330 × 220 | plastic 219 | 12.5 / 13.5 | 360 × 320 × 840 |
| 2 | 400 | 350 × 284 | plastic 284 | 14 / 15 | 360 × 340 × 760 |
| 3 | 375 | 370 × 365 | rubber/steel 282 | 13.5 / 14.5 | 415 × 415 × 745 |
| 4 | 440 | 430 × 315 | rubber/steel, fit drawing required | 15.5 / 16.5 | 365 × 365 × 840 |
| 5 | 400 | 316 × 220 | plastic 219 | 12.5 / 13.5 | 360 × 360 × 810 |
| 6 | 440 | 435 × 276 | rubber/steel, fit drawing required | 16 / 17 | 395 × 395 × 800 |
| 7 | 440 | 430 × 315 | rubber/steel, fit drawing required | 16 / 17 | 365 × 365 × 855 |
| 8 | 440 | 430 × 355 | rubber/steel, fit drawing required | 17.5 / 18.5 | 400 × 400 × 855 |
Distinct gun, pump and follower configurations have separate rod length, barrel and packed mass.
| Configuration | Pump ratio | Rod mm | Barrel height × diameter mm | Follower direction mm | Net/gross kg | Outer box mm |
|---|---|---|---|---|---|---|
| 1 | 50:1 | 440 | 430 × 315 | rubber/steel, fit drawing required | 16.5 / 17.5 | 365 × 365 × 830 |
| 2 | 50:1 | 440 | 430 × 355 | rubber/steel 282 | 17 / 18 | 400 × 400 × 830 |
| 3 | 40:1 | 363 | 355 × 220 | plastic 219 | 11 / confirm | 360 × 320 × 840 |
| 4 | 40:1 | 363 | 355 × 220 | plastic 219 | 12.5 / 13.5 | 360 × 320 × 840 |
Separate 40:1 and 50:1 assemblies have distinct spring/follower options and barrel geometries. Confirm whether the spring and plate are included in the chosen pack.
| Configuration | Ratio | Rod mm | Barrel height × diameter mm | Net/gross kg | Outer box mm |
|---|---|---|---|---|---|
| 1 | 40:1 | 440 | 430 × 355 | 20.5 / 21.5 | 445 × 445 × 880 |
| 2 | 40:1 | 440 | 430 × 355 | 20 / 21 | 400 × 400 × 860 |
| 3 | 40:1 | 505 | 475 × 365 | 22 / 23 | 460 × 460 × 885 |
| 4 | 50:1 | 400 | 330 × 220 | 14 / 15 | 360 × 320 × 840 |
| 5 | 50:1 | 420 | 430 × 355 | 20 / 21 | 445 × 445 × 865 |
| 6 | 50:1 | 420 | 430 × 355 | 20 / 21 | 400 × 400 × 865 |
Manual pump assemblies include selected control gun, high-pressure hose, spring and follower directions. Output per stroke is separate from powered-pump flow.
| Configuration | Output kg/stroke | Barrel height × diameter mm | Net/gross kg | Outer box mm |
|---|---|---|---|---|
| 1 | 0.005 | 324 × 219 | 14 / 15 | 400 × 360 × 530 |
| 2 | 0.005 | 324 × 219 | 9 / 10 | 370 × 300 × 630 |
| 3 | 0.005 | 324 × 219 | 7 / 8 | 370 × 300 × 550 |
| 4 | 0.005 | 442 × 276 | 13 / 14 | 400 × 400 × 590 |
| 5 | 0.008 | 410 × 285 | 8 / 9 | 350 × 320 × 590 |
A trolley, pump, control gun, barrel cover, rubber/steel follower and 4 m hose form a mobile dispensing direction. Vessel capacity and actual support geometry must be approved.
| Configuration | Vessel range L | Pump rod mm | Cover diameter mm | Follower diameter mm | Complete net/gross kg |
|---|---|---|---|---|---|
| 1 | 20–60 | 440 | 316 | 310 | 18.5 / 19.5 |
| 2 | 180–220 | 823 | 600 | 585 | 32 / 33 |
Cart, short-barrel and sunk-cylinder layouts provide separate lubrication configurations. Sets combine grease gun, spring hose, double-handle nozzle, long high-pressure hose, scraper and wrench.
| Configuration | Construction | Supply V | Power W | Working pressure MPa | Delivery g/min | Mass kg | Box mm |
|---|---|---|---|---|---|---|---|
| 1 | Four-cylinder cart | AC 220 | 600 | 50 | 400 | 17.5 | 360 × 340 × 470 |
| 2 | Four-cylinder short barrel | 24 | 450 | 50 | 400 | 17 | 370 × 340 × 500 |
| 3 | Twin-cylinder sunk | 24 | 450 | 50 | 360 | 13.4 | 390 × 385 × 270 |
| 4 | Four-cylinder sunk | AC 220 | 600 | 50 | 400 | 13.7 | 390 × 385 × 270 |
A four-cylinder sunk-type 24 V lubrication direction includes voltage display, follower plate and dispensing accessories. Match the actual barrel and supply.
A retracting hose direction uses double-layer steel-wire reinforcement. The complete reel, hose, swivel and connection rating requires item approval.
A separate manual lever gun and combined air/manual set address service lubrication. Match the barrel, seals and hose to the selected grease.
Plastic, rubber/steel and stepped follower-plate constructions are separate replacement directions. Match the actual pump, barrel and seal geometry.
A stepped follower plate, removable filter, integrated machined cylinder and selected engineering-plastic parts provide maintenance-oriented configurations. Seal, valve-seat, spring and plated component details require the actual bill.
A side-mounted swath adjustment provides a separate miniature finishing configuration. Stainless needle/nozzle, brass cap and selected finish details are matched to the actual gun.
A separate supporting stand holds a selected gravity gun for cup filling. Confirm the gun/cup fit, mounting arrangement and support geometry.
A front-exhaust aluminium sander provides a separate, explicitly identified high-speed sanding reference. Select the matching paper, pad and spindle configuration.
Oil-filled anti-shock mechanical and digital arrangements have separate gauge diameters and ranges. Confirm the selected calibration file and chuck.
| Configuration | Gauge | Diameter mm | Working air bar | Gauge range bar |
|---|---|---|---|---|
| 1 | Oil-filled mechanical | 80 | 0–8 | 0–12 |
| 2 | Mechanical | 63 | 0–8 | 0–12 |
| 3 | Digital | 80 | 0–8 | 0–18 |
Each specification belongs to the listed configuration. Full-size/miniature, gravity/suction, body material, nozzle/cup, drive, extraction, pump ratio, rod, follower, hose and accessory choices are not freely interchangeable. Published configuration references include 2024–2025 equipment schedules and require current availability and item-file confirmation. Different revisions stay separate. Nominal metric and inch holders/pads are selected by their actual drawing. Motor rpm, reciprocating BPM, air input and fluid-output pressure are different quantities. Tool, battery, complete-set and outer-carton masses have different scopes. Rated pressure, electrical supply, battery/charger, duty, fluid compatibility and attachment speed limits require the exact complete assembly and instructions. Sample/trial arrangement, MOQ, branding, timing, inspection and destination evidence are agreed in the quotation.
Focus the sourcing conversation on the features, materials and production details that make a difference to your product range.
Compare coating viscosity, needle/nozzle/cup, body and seal construction alongside pattern, air demand and supply. Link lubrication media and pump assembly rather than selecting only a nominal pressure.
Combine the tool with its actual chuck/drive/collet/pad, extraction, hose, fitting, regulator or follower arrangement. Match each powered or pneumatic component to the intended supply and operating conditions.
Plan the socket, bit, stone, chisel, brush, nozzle, cup and hose bill for the actual service programme. Approve count conventions, fitted-case layout and replacement-part identification with the sample.
Bring artwork, reference samples and a target cost. The available process, minimum quantity, sample charges and development scope are reviewed for the chosen option.
Send the coating or grease, work material, required operation, drawing and supply conditions. Discuss nozzle/cup, holder, reach, body finish, control, hose and mating interface. Engineering changes require an item-specific feasibility proposal.
Discuss selected colour finishes, legal artwork, marking, sleeves, colour boxes, blister packs, moulded or aluminium cases, carton layout and spare-part grouping. The approved component bill controls each assortment.
Request a quotation by exact configuration with sample/trial needs, quantity, destination, evidence and packing. MOQ, sample cost, tooling, lead time, service parts and warranty are confirmed for the selected order.
Agree which product characteristics need testing and how the approved sample relates to the bulk order.
Agree checks for nozzle, needle, cup, seal, thread, hose, regulator, gauge, valve and pump configuration. Pressure-rated parts need a matched operating file for the complete selected assembly.
Agree a coating-pattern, delivery, fastening, drilling, cutting, sanding or lubrication trial with the intended media/material and supply. Confirm tool/attachment limits, collection method and operating instructions.
Check tool interfaces, moving parts, selected electrical/battery items, case cavities, consumable counts, markings and pack protection. Approve the actual carton quantity and gross/net mass before shipment.
Test capability is a starting point for the inspection plan. Request the method, applicable model and results needed for your order.
Documentation follows the exact delivered configuration, operating medium and destination. Component credentials do not automatically cover the complete assembly.
State the sales market, intended users and required files in your first enquiry. Current validity and scope are checked for the selected supplier and product; a category description does not certify every item.
Share your document requirements ↗Your sales channel changes the assortment, packaging and quality priorities. Tell us the intended use as well as the product name.
Plan finishing guns, detail spraying, preparation sanders, extraction, impact/ratchet tools, tyre inflation and grease equipment around the actual repair workflow.
Select cup or airless systems, pressure pots, mixing, tips and air preparation for the intended coating, substrate, area, supply and finish trial.
Coordinate drilling, grinding, sheet-metal preparation, cleaning, lubrication, replacement connections and fitted tool assortments with clear component and packaging requirements.
Samples, commercial terms and responsibilities are agreed for the project. Use the same product and packing specification when comparing quotations.
Product, reference image, quantity, sales market and timing.
Review configuration, materials, sample scope and relevant documents.
Agree artwork, packaging, sample, testing and inspection criteria.
Set price, payment, production, delivery and defect remedies in writing.
Practical answers about this sourcing direction, customization and the reference options. Your agreed specification and written quotation determine the actual order.
We provide trade sourcing and configuration coordination. Manufacturing, inspection, branding, after-sales and warranty responsibilities are specified for the selected order.
Discuss miniature airbrushes, HVLP/LVMP and conventional cup guns, electric/cordless handheld sprayers, diaphragm/plunger airless systems, pneumatic airless equipment, pots, mixers, tips and replacement cups.
Send the coating or grease, viscosity/test method, substrate, finish or lubrication task, required output and available supply. Approve the actual material path, nozzle/tip, seal, cup/barrel, hose and controls together.
Impact and ratchet wrenches, screwdrivers, drills, die/angle grinders, cut-off tools, belt/orbital/dual-action sanders, hammers, scalers, body saws, shears, nibblers and panel planishing directions are included. Extraction can be central, self-collection or a separate powered unit.
Yes. Discuss air/manual/electric/battery lubrication, pump rods, barrels, trolleys, followers, control guns and hoses, plus mechanical/digital inflators, chucks, couplers, adaptors and air preparation. Ratings and compatibility remain item-specific.
Selected tool cases, sockets, bits, stones, chisels, nozzle sets, cups, brushes, air fittings and hose combinations can be discussed. Approve the exact bill, count convention, artwork, fitted layout and sample.
No. Each reference belongs to its own configuration and revision. Confirm the actual thread, holder, fluid path, component rating, supply and instructions; nominal inch/metric options and separate pressure roles need the selected drawings.
Send quantities by configuration, sample/trial needs, destination, required documents and packaging. Current availability, charges, MOQ, delivery schedule, inspection and commercial terms are agreed in a written quotation.
Factory Sourcing Hub handles this enquiry as an independent sourcing and trading service. The product route, supplier suitability, sample scope and order responsibilities are agreed for the actual project.
Send the product reference, quantities per variation, customization and packaging. Prices, minimums, sample charges and delivery dates are confirmed in a current quotation; the page is not a live inventory or price feed.
Yes. State whether you need a reference sample, a customized sample or development work. Agree the sample cost and shipping, approval specification, inspection plan and remedy for non-conforming goods before the bulk order.
Reference images, drawings, logo artwork and a product list are useful. Include quantities, the intended users and sales market, packaging, required documents and timing. After submitting the form, email attachments to kunhuow@gmail.com with your enquiry reference.
A reference picture or a short description is enough to begin. Add the details you already know; the optional fields help make the follow-up more useful.
Download the enquiry checklist ↓
Independent sourcing and trading service. Supplier choice, service costs and order conditions are discussed for your project.
Product selection, customization, samples and quotation enquiries.
Compare separate product ranges and prepare a brief that fits your assortment.
Compare air spray guns, airless painting equipment, paint tanks, pneumatic nailers, impact wrenches, sanders, grinders and workshop kits with matched accessories and configuration support.
Explore this service ↗
Source air compressors, pneumatic fastening and finishing tools, spray guns, electric and airless coating equipment, hoses, regulators, lubrication machines and complete workshop kits through an independent trade service.
Explore this service ↗
Compare drills, hammers, cutting and finishing tools, pneumatic equipment, garden machinery, hand tools and accessories with configuration-led sourcing support.
Explore this service ↗
Source metal and masonry drills, taps, hole saws, wood and diamond blades, chisels, pneumatic nailers, driver tools and configured retail assortments.
Explore this service ↗Information basis: published product information reviewed . Reference details support a sourcing discussion. Current supply, samples and product-specific documents are confirmed for the selected item.
