Electric pressure washers
Carbon-brush and induction-motor references include compact, horizontal, wall-mounted and hose-storage formats. Match voltage, frequency, rated pressure, maximum pressure and inlet conditions.
Enquire about this range ↗Independent equipment sourcing
Cleaning, spraying and power equipment Specify the complete working configuration
Pressure Washers, Sprayers, Pumps & Power Equipment Sourcing
Compare electric and engine-powered pressure washers, battery and manual sprayers, gasoline generators, water pumps, engines and planting equipment. Enquire with the duty, power, accessories and packing you need.
- Separate rated and maximum pressure, flow and electrical output
- Specify tank, motor or engine, hose, nozzle, charger and supplied accessories
- Prepare an item-specific quotation with samples, documents and packing
Manufacturing, product documents and order conditions depend on the model and supply route selected for your project.
Start with a product reference, intended use and estimated quantity. We bring product selection, sample questions and quotation details into one conversation.
Email your reference image ↗ServiceIndependent trading and sourcing coordination
EquipmentCleaning, spraying, pumps, generators and planting
Selection basisConfirmed duty point, configuration and quotation
Enquiry emailkunhuow@gmail.com
Explore the product range
Build the range
your buyers need.
Choose a focused product or discuss a coordinated assortment. Each direction can be developed into a more specific model and packaging brief.
Engine-powered cleaning equipment
Pressure-washer assemblies with plunger pumps, adjustable lances and accessory storage require a matched engine, pump, hose and nozzle schedule.
Enquire about this range ↗Cleaning accessories
Surface-cleaner connections, diameters, flow and temperature references; spray guns, inlet fittings, soap bottles, hoses and cleaning pins are selected by actual compatibility.
Enquire about this range ↗Battery sprayers
Battery-voltage and capacity options, PP or PE tank constructions, voltmeters, lance holders and diaphragm-pump controls are configuration-specific.
Enquire about this range ↗Lithium and removable-battery sprayers
Specify nominal battery and charger ratings, pack interface, capacity, tank and seals. A listed voltage class does not establish interchangeability.
Enquire about this range ↗Manual knapsack and pressure sprayers
Backpack, pressure-vessel and handheld directions with carton references. Confirm actual capacity, pump construction, lance and liquid compatibility.
Enquire about this range ↗Sprayer pumps and garden spraying
Plunger-pump and powered spraying references require separate pump drive, output, working-pressure, tank and application definitions.
Enquire about this range ↗Gasoline generators
Rated and maximum electrical outputs, fuel tanks, starting options, packing and alternator construction references are tied to a chosen configuration.
Enquire about this range ↗Variable-frequency generator directions
Specify power quality, load and start-up requirements, outlets and noise-test needs. Current waveform and acoustic performance require model-specific evidence.
Enquire about this range ↗Gasoline water pumps
Compare required duty points, suction, ports, priming, engine arrangement, packaging and weights. Maximum head and maximum flow are not a simultaneous operating point.
Enquire about this range ↗Gasoline engines and vibrator drives
Four-stroke air-cooled engine references, bore and stroke, output schedules, torque, fuel and oil capacities, drive interfaces and packing require the exact application.
Enquire about this range ↗Seeders, fertilizer tools and transplanters
Portable and hand-push seeders, combined fertilizer directions and two- or three-mouth transplanters with specific planting, hopper and carton references.
Enquire about this range ↗Garden equipment and length options
Actual garden-equipment listings include length and packing schedules. Confirm the item construction, connections, kit contents and pack roles.
Enquire about this range ↗Air-blower development briefs
Define the material, area, airspeed, volume, power source, nozzle, sound and operating-document requirements before equipment selection.
Enquire about this range ↗Watering-can enquiries
Original exhibition scope includes watering and garden-sprinkling cans. Submit capacity, material, handle, spout and packing requirements for current product confirmation.
Enquire about this range ↗Reference product directions
Start with a product.
Define the details.
Use these options to describe what you are buying. The public references identify your enquiry; the final model and specification are confirmed before an order.
REFERENCE 0340-01
Electric pressure washer · 01
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Threaded connection
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Product Size
- 315*207*234mm
- Carton Size
- 352*250*270mm
- Configuration reference
9 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 | Option 04 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Option 04 Motor Type Induction Induction Induction To confirm Motor power 800W 1000W 800W 1000W Volt/Freq AC220V-240V-50/60HZ AC100V-127V-50/60HZ AC220V-240V-50/60HZ AC100V-127V-50/60HZ To confirm AC220V-240V-50/60HZ AC100V-127V-50/60HZ Rated Pressure 60bar 80bar 60bar 80bar Max Pressure 90bar 110bar 90bar To confirm Rated Flow 6L/min 6L/min 6L/min To confirm Power Cord Length 5 M 5 M To confirm To confirm Hose length 5M 5 M 7 M 7 M NW/G.W 7.5/8kg 7.5/8kgs 7.5/8kgs 7.5/8kgs
REFERENCE 0340-02
Electric pressure washer · 02
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Hose-storage brief
- Two storage arrangements; selection to confirm
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Power Cord Length
- 5 M
- Hose length
- 5 M
- Product Size
- 271*252*820mm
- Carton Size
- 290*280*835mm
- Loading Quantity(20GP/40GP/40HQ)
- 448/896/1008
- N.W/GW
- 10/10.5kgs
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Motor Power 1500W 1600W 1800W Rated Pressure 90bar To confirm To confirm Max Pressure 130bar 140bar 150bar Rated Flow To confirm 5.5L/min 6.0L/min
REFERENCE 0340-03
Electric pressure washer · 03
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Hose-storage brief
- Two storage arrangements; selection to confirm
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Power Cord Length
- 5 M
- Hose length
- 5 M
- Product Size
- 252*258*820mm
- Carton Size
- 290*280*835mm
- Loading Quantity(20GP/40GP/40HQ)
- 448/896/1008
- N.W/GW
- 10/10.5kgs
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Motor Power 1500W 1600W 1800W Rated Pressure 90bar To confirm To confirm Max Pressure 130bar 140bar 150bar Rated Flow To confirm To confirm 6.0L/min
REFERENCE 0340-04
Electric pressure washer · 04
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Hose-storage brief
- Two storage arrangements; selection to confirm
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Power Cord Length
- 5 M
- Hose Length
- 5 M
- Product Size
- 252*258*820mm
- Carton Size
- 290*280*835mm
- Loading Quantity (20GP/40GP/40HQ)
- 448/896/1008
- N.W/Gw
- 10/10.5kgs
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Motor Power 1500W 1600w 1800W Rated Pressure 90bar 100bar 110bar Max Pressure 130bar 140bar 150bar Rated Flow 5.5L/min 5.5L/min 6.0L/min
REFERENCE 0340-05
Electric pressure washer · 05
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Hose-storage brief
- Two storage arrangements; selection to confirm
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Power Cord Length
- 5 M
- Hose length
- 5 M
- Product Size
- 295*301*742mm
- Carton Size
- 305*285*760mm
- Loading Quantity (20GP/40GP/40HQ)
- 456/936/1062
- NW/GW
- 10/10.5kgs
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 Motor Power 1500W 1600W Rated Pressure 90bar 100bar Max Pressure 130bar 140bar Rated Flow 5.5L/min To confirm
REFERENCE 0340-06
Electric pressure washer · 06
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Hose-storage brief
- Two storage arrangements; selection to confirm
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Power Cord Length
- 5 M
- Hose Length
- 5 M
- Product Size
- 281*295*737mm
- Carton Size
- 305*285*760mm
- Loading Quantity(20GP/40GP/40HQ)
- 456/936/1062
- NW/GW
- 10/10.5kgs
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 Motor Power 1500W 1600W Rated Pressure 90bar 100bar Max Pressure 130bar 140bar Rated Flow 5.5L/min To confirm
REFERENCE 0340-07
Electric pressure washer · 07
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Rated Flow
- 5.5L/min
- Power Cord Length
- 5 M
- Hose Length
- 5 M
- Carton Size
- 320*260*490mm
- Loading Quantity (20GP/40GP/40HQ)
- 756/1548/1665
- N.W/GW
- 6/6.5kgs
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 Motor Power 1200W 1400W Rated Pressure 60bar 80bar Max Pressure 90bar 120bar Product Size 248*264*360mm/248*264*720mm To confirm
REFERENCE 0340-08
Compact electric pressure washer · 01
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Rated Flow
- 5.5L/min
- Power Cord Length
- 5 M
- Hose Length
- 5 M
- Product Size
- 230*200*360mm/230*200*560mm
- Carton Size
- 288*230*390mm
- Loading Quantity (20GP/40GP/40HQ)
- 1200/2496/2806
- N.W/GW
- 6/6.5kgs
- Configuration reference
3 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 Motor Power 1200W 1400W Rated Pressure 60bar 80bar Max Pressure 90bar 120bar
REFERENCE 0340-09
Compact electric pressure washer · 02
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Power Cord Length
- 5 M
- Hose length
- 5 M
- Carton Size
- 288*230*390mm
- Loading Quantity (20GP/40GP/40HQ)
- 1200/2496/2806
- Configuration reference
6 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 Motor Power 1200W 1400W Rated Pressure 60bar 80bar Max Pressure 90bar To confirm Rated Flow 5.5L/min To confirm Product Size 230*200*360mm/230*200*560mm To confirm NW/GW 6/6.5kgs To confirm
REFERENCE 0340-10
Electric pressure washer · 08
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Hose-storage option
- Functional hose reel
- Hose-storage brief
- Two storage arrangements; selection to confirm
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Power Cord Length
- 5 M
- Hose length
- 5 M
- Product Size
- 696*353*304mm
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Motor Power 1500W 1600W 1800W Rated Pressure 90bar To confirm 110bar Max Pressure 130bar 140bar 150bar Rated Flow 5.5L/min 5.5L/min 6.0L/min
REFERENCE 0340-11
Electric pressure washer · 09
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Threaded connection
- Handle
- Metal handle
- Detergent arrangement
- Built-in soap tank
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Volt/Freq
- AC220V-240V-50/60HZ
- Power Cord Length
- 5 M
- Product Size
- 304*353*584mm
- Carton Size
- 360*310*595mm
- Loading Quantity (20GP/40GP/40HQ)
- 456/924/973
- Configuration reference
7 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 | Option 04 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Option 04 Motor Type Carbon Brush Carbon Brush To confirm To confirm Motor Power 2000W 2200W 2200W 2400W Rated Pressure 110bar 120 bar /Hi-flow 115bar 120bar 130bar Max Pressure 160bar 170bar To confirm To confirm Rated Flow 6.6L/min 6.8 L/min/Hi-flow 7.5 L/min 6.6L/min 6.6L/min Hose Length 5 M 5 M 5M 5 M N.W/GW 15/15.5kgs 15/15.5kgs 20/20.5kgs 20/20.5kgs
REFERENCE 0340-12
Electric pressure washer · 10
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Rated Flow
- 5.5L/min
- Power Cord Length
- 5 M
- Hose Length
- 5 M
- Product Size
- 230*200*360mm/230*200*560mm
- Carton Size
- 288*230*390mm
- Loading Quantity (20GP/40GP/40HQ)
- 1200/2496/2806
- N.W/GW
- 6/6.5kgs
- Configuration reference
3 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 Motor Power 1200W 1400W Rated Pressure 60bar 80bar Max Pressure 90bar 120bar
REFERENCE 0340-13
Electric pressure washer · 11
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Rated Flow
- 5.5L/min
- Power Cord Length
- 5 M
- Hose Length
- 5 M
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 Motor Power 1200W 1400W Rated Pressure 60bar 80bar Max Pressure 90bar 120bar Product Size 406*212*197mm/669*212*197mm To confirm
REFERENCE 0340-14
Electric pressure washer · 12
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Hose-storage brief
- Two storage arrangements; selection to confirm
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Power Cord Length
- 5 M
- Hose length
- 5 M
- Product Size
- 696*353*304mm
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Motor Power 1500W 1600W 1800W Rated Pressure 90bar To confirm 110bar Max Pressure 130bar 140bar 150bar Rated Flow 5.5L/min 5.5L/min 6.0L/min
REFERENCE 0340-15
Electric pressure-washer development direction
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
REFERENCE 0340-16
Battery sprayer configuration · 01
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Tank material reference
- PP
- Display component
- Voltmeter
- Storage component
- Independent lance buckle
- Pump / control
- Diaphragm pump with speed regulator
- Configuration reference
10 listed configurations · compare parameters and packing
Configuration | Battery | Carton Size — verify the selected configuration Configuration Battery Carton Size Option 01 12V,8AH/12AH 38x19.5×52.5cm Option 02 12V,8AH/12AH 38x19.5x55cm Option 03 12V,8AH/12AH 38x18.5×52cm Option 04 12V,8AH/12AH 30x24x55cm Option 05 12V,8AH/12AH 38x23x60cm Option 06 12V/8AH/12AH 38.5x24x53cm Option 07 12V,8AH 32x19.5×51.5cm Option 08 12V8AH 32x19.5x51.5cm Option 09 12V,8AH/12AH 40x33x65cm Option 10 12V/8AH/12AH 41x32x68cm
REFERENCE 0340-17
Compact electric pressure washer · 03
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Power Cord Length
- 5 M
- Hose Length
- 5 M
- Carton Size
- 288*230*390mm
- Loading Quantity (20GP/40GP/40HQ)
- 1200/2496/2806
- Configuration reference
6 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 Motor Power 1200W 1400W Rated Pressure 60bar 80bar Max Pressure 90bar 120bar Rated Flow 5.5L/min To confirm Product Size 230*200*360mm/230*200*560mm To confirm NW/GW 6/6.5kgs To confirm
REFERENCE 0340-18
Electric pressure washer · 13
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Power-cord length
- 5 M
- Hose Length
- 5 M
- Configuration reference
6 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 Motor Type Carbon Brush To confirm Motor Power To confirm 1400W Rated Pressure 60bar 80bar Max Pressure 90bar 120bar Rated Flow To confirm 5.5L/min Product Size 406*212*197mm 669*212*197mm To confirm
REFERENCE 0340-19
Battery sprayer configuration · 02
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Configuration reference
5 listed configurations · compare parameters and packing
Configuration | Battery | Carton Size — verify the selected configuration Configuration Battery Carton Size Option 01 3.7/4.2V,2AH/2.5AH 43.5x36x29.5cm Option 02 3.7/4.2V,2AH/2.5AH 43.5x36x29.5cm Option 03 3.7/4.2V,2AH/2.5AH 43.5x36x29.5cm Option 04 3.7/4.2V,2AH/2.5AH 56x37.5x46cm Option 05 3.7/4.2V,2AH/2.5AH 56x37.5×58cm
REFERENCE 0340-20
Sprayer pump configuration
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Configuration reference
4 listed configurations · compare parameters and packing
Configuration | Plunger no.x Dia. | Pressure (Kg/cm2) | Output(L/min) | Power | Weight | Size(mm) — verify the selected configuration Configuration Plunger no.x Dia. Pressure (Kg/cm2) Output(L/min) Power Weight Size(mm) Option 01 3pcsx22mm 20-35 18-26 2-3HP 8.5Kg 300x270×320 Option 02 3pcsx22mm 20-35 18-26 2-3HP 9.7Kg 300x270x320 Option 03 3pcsx22mm 20-35 18-26 2-3HP 8.5Kg 350x290x330 Option 04 3pcsx22mm 20-35 18-26 2-3HP 10Kg 390x290x330
REFERENCE 0340-21
Gasoline generator configuration · 01
Identify continuous loads and motor-starting demands, voltage, frequency, sockets and installation environment. Confirm rated versus maximum output, starting arrangement and the selected package.
- Engine: Starting system
- Recoil/Electric Start
- Generator: Rated voltage (V)
- 110/230
- Generator: Rated frequency (Hz)
- 50/60
- Configuration reference
10 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 | Option 04 | Option 05 | Option 06 | Option 07 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Option 04 Option 05 Option 06 Option 07 Engine: Max. output power (HP) 7.0 7.0 7.0 7.0 15 18 18 Engine: Bore × Stroke (mm) 70×55 70×55 70×55 70×55 To confirm 92×69 92×69 Engine: Displacement (cm³) 212 212 212 212 To confirm To confirm To confirm Engine: Fuel tank capacity (L) 15 15 15 15 25 25 25 Engine: Oil capacity (L) 0.6 0.6 0.6 0.6 1.2 1.2 1.2 Generator: Rated output (W) 1300 2000 2500 2800 5000 6000 7000 Generator: Max. output power (W) 1500 2200 2700 3000 5500 6500 7500 N.W./G.W. (Kg) 31/33 33/35 36/38 37.5/39.5 63.5/66.5 68/71 70/73 Carton Size (cm) 61*45.5*45 61*45.5*45 61*45.5*45 61*45.5*45 70*52.5*55.5 70*52.5*55.5 70*52.5*55.5 Loading / 20GP/40GP/40HQ 208/432/544 208/432/544 208/432/544 208/432/544 127/265/333 127/265/333 127/265/333
REFERENCE 0340-22
Garden equipment configuration · 01
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Carton quantity
- 8 pieces
- Carton size
- 63x20.5x42 cm
REFERENCE 0340-23
Garden equipment configuration · 02
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Carton quantity
- 12 pieces
- Carton size
- 65x19.5x38 cm
REFERENCE 0340-24
Garden equipment configuration · 03
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Carton quantity
- 12 pieces
- Carton size
- 60x18x34 cm
REFERENCE 0340-25
Garden equipment configuration · 04
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Carton quantity
- 12 pieces
- Carton size
- 53x16x33 cm
REFERENCE 0340-26
Garden equipment configuration · 05
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Carton quantity
- 16 pieces
- Carton size
- 48x15x32 cm
REFERENCE 0340-27
Garden equipment configuration · 06
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Configuration reference
4 listed configurations · compare parameters and packing
Length | Group box | Carton | No packing — verify the selected configuration Length Group box Carton No packing 2.5M 61×37×56cm(48PCS) 18×7×18cm(1PC) 49×37×51cm(50PCS 5M 53×44×66cm(36PCS) 21×8×21cm(1PC) 61×37×56cm(50PCS) 7.5M 61×48×49cm(24PCS) 23×9×23cm(1PC) 53×44×66cm(40PCS) 10M 58×49×54cm(24PCS) 26×8×23cm(1PC) 53×44×66cm(30PCS)
REFERENCE 0340-28
Double-barrel portable seeder
Provide seed or plant dimensions, soil conditions, spacing and application requirements. Confirm the hopper, metering or planting mechanism and packing against a sample.
- Construction direction
- Double-barrel portable seeder
- Seed brief
- Corn; soybean; peanut; cotton; seed suitability to confirm
- Seeds per hole
- 1-3
- Seed capacity reference
- 1.5-2 kg
- Fertilizer capacity reference
- 1.5-2 kg
- Gross / net weight
- 3 / 2.7 kg
- Carton
- 81x41x43 cm; 6 pieces
- Listed load (20FT / 40HQ)
- 1170 / 2850 pieces; packing to confirm
REFERENCE 0340-29
Three-mouth vegetable transplanter
Provide seed or plant dimensions, soil conditions, spacing and application requirements. Confirm the hopper, metering or planting mechanism and packing against a sample.
- Construction direction
- Three-mouth vegetable transplanter
- Material
- Stainless steel
- Diameter
- 7.5 cm
- Planting-depth reference
- 5-15 cm; soil and crop suitability to confirm
- Gross / net weight
- 2 / 1.8 kg
- Carton
- 100x26.5x32 cm; 10 pieces
REFERENCE 0340-30
Two-mouth vegetable transplanter
Provide seed or plant dimensions, soil conditions, spacing and application requirements. Confirm the hopper, metering or planting mechanism and packing against a sample.
- Construction direction
- Two-mouth vegetable transplanter
- Material
- Stainless steel
- Diameter
- 7.5 cm
- Planting-depth reference
- 5-15 cm; soil and crop suitability to confirm
- Gross / net weight
- 2.0 / 1.8 kg
- Carton
- 91x41x43 cm; 10 pieces
REFERENCE 0340-31
Fertilizing-machine development brief
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Direction
- Fertilizing-machine development brief
REFERENCE 0340-32
Knapsack sprayer configuration · 01
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Configuration reference
6 listed configurations · compare parameters and packing
Configuration | Battery | Carton Size — verify the selected configuration Configuration Battery Carton Size Option 01 To confirm 39.5x19.5×50cm Option 02 To confirm 33.5x18x47.5cm Option 03 12V,12AH 43.5x36x29.5cm Option 04 12V,12AH 43.5×36x29.5cm Option 05 12V,12AH 43.5x36x29.5cm Option 06 12V,12AH 43.5x36x29.5cm
REFERENCE 0340-33
Knapsack sprayer configuration · 02
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Tank material reference
- PP / PE; selected construction to confirm
- Configuration reference
10 listed configurations · compare parameters and packing
Configuration | Carton Size — verify the selected configuration Configuration Carton Size Option 01 37.5x21x52cm Option 02 37.5×21×52cm Option 03 37.5x21×52cm Option 04 35.5x18x49.5cm Option 05 37x19x50.8cm Option 06 37x20x51.5cm Option 07 37.5x19.2x51.5cm Option 08 37.5x19.2x51.5cm Option 09 37.5x19.2x51.5cm Option 10 37.5×20×53.7cm
REFERENCE 0340-34
Battery sprayer configuration · 03
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Tank material reference
- PP
- Display component
- Voltmeter
- Storage component
- Independent lance buckle
- Pump / control
- Diaphragm pump with speed regulator
- Configuration reference
11 listed configurations · compare parameters and packing
Configuration | Battery | Carton Size — verify the selected configuration Configuration Battery Carton Size Option 01 12V8AH/12AH 36x18x50cm Option 02 12V,8AH/12AH To confirm Option 03 12V,8AH/12AH 40x21×50cm Option 04 12V,8AH/12AH 40x21x50cm Option 05 12V,8AH/12AH 18V4AH 40x21.5x50cm Option 06 12V8AH/12AH 40x21.5x50cm Option 07 12V,8AH/12AH 38×19.5x49.3cm Option 08 12V,8AH/12AH 38x19.5x49.3cm Option 09 12V,8AH/12AH 38x19.5x49.3cm Option 10 12V,8AH/12AH 40x21x50cm Option 11 12V,8AH/12AH 40×21×51.5cm
REFERENCE 0340-35
Battery sprayer configuration · 04
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Tank material reference
- PP
- Display component
- Voltmeter
- Storage component
- Independent lance buckle
- Pump / control
- Diaphragm pump with speed regulator
- Configuration reference
7 listed configurations · compare parameters and packing
Configuration | Battery | Carton Size — verify the selected configuration Configuration Battery Carton Size Option 01 12V8AH/12AH 36x18x48.5cm Option 02 12V,8AH/12AH 36x19x42cm Option 03 12V,8AH/12AH 39x21.5x49cm Option 04 12V,8AH/12AH 39x21.5x49cm Option 05 12V,8AH/12AH 18V,4AH 39x21.5x49cm Option 06 12V,8AH/12AH 38x19.5x48cm Option 07 12V,8AH/12AH 38x21x49.5cm
REFERENCE 0340-36
Lithium-battery sprayer configuration · 01
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Tank material reference
- PP
- Display component
- Voltmeter
- Storage component
- Independent lance buckle
- Pump / control
- Diaphragm pump with speed regulator
- Configuration reference
7 listed configurations · compare parameters and packing
Configuration | Battery | Carton Size — verify the selected configuration Configuration Battery Carton Size Option 01 12V,2.0AH/2.5AH/8AH, 18V,2.5AH/4AH 31×22x51.5cm Option 02 12V,2.0AH/2.5AH/8AH, 18V,2.5AH/4AH 30x24x55cm Option 03 12V,2.0AH/2.5AH/8AH, 18V,2.5AH/4AH 32x26x58cm Option 04 12V2.0AH/ 2.5AH/4AH/5AH 30x24x55cm Option 05 12V2.0AH/ 2.5AH/4AH/5AH 39x26x60cm Option 06 12V2.0AH/ 2.5AH/4AH/5AH 30×24×55cm Option 07 12V2.0AH/ 2.5AH/4AH/5AH 39x26x60cm
REFERENCE 0340-37
Lithium-battery sprayer configuration · 02
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Configuration reference
2 listed configurations · compare parameters and packing
Configuration | Battery | Carton Size — verify the selected configuration Configuration Battery Carton Size Option 01 12V,2.5AH/18V,4AH 31x22x51.5cm Option 02 12V,2.5AH/18V,4AH 30x24x55cm
REFERENCE 0340-38
Lithium-battery sprayer configuration · 03
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Configuration reference
4 listed configurations · compare parameters and packing
Configuration | Battery | Carton Size — verify the selected configuration Configuration Battery Carton Size Option 01 12V,2.5AH/18V,4AH 30x24x55cm Option 02 12V,2.5AH/18V,4AH 31×22×51.5cm Option 03 12V,2.5AH/18V,4AH 30x24x55cm Option 04 12V2.5AH/18V/4AH 32x26x55cm
REFERENCE 0340-39
Powered garden-spraying equipment · 01
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Configuration reference
2 listed configurations · compare parameters and packing
Configuration | Tank Capacty | Output power | Discharging Volume | Weight | Size(mm) — verify the selected configuration Configuration Tank Capacty Output power Discharging Volume Weight Size(mm) Option 01 20L/25L 0.7kW7000rpm 25.6cc 10kgs 405×330×610mm(20L) 405×330×640mm(25L) Option 02 23L/30L 0.7kW7000rpm 31.5cc 12kgs 485×395×615mm
REFERENCE 0340-40
Powered garden-spraying equipment · 02
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Configuration reference
2 listed configurations · compare parameters and packing
Configuration | Tank Capacity | Range | Output power | Discharging Volume | Mixed Fuel Ratio | G/N weight | Size(mm) — verify the selected configuration Configuration Tank Capacity Range Output power Discharging Volume Mixed Fuel Ratio G/N weight Size(mm) Option 01 14L To confirm 2.13kw 7500rpm 41.5cc 25:1 12kgs 11kgs 490x415x705 Option 02 26L To confirm 2.13kw 7500rpm 41.5cc 25:1 12kgs 11kgs 490x415x800
REFERENCE 0340-41
Powered garden-spraying equipment · 03
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Configuration reference
4 listed configurations · compare parameters and packing
Configuration | Pressure(Kg/cm2) | Out put(L/min) | Power | Weight Kg | Size(mm) — verify the selected configuration Configuration Pressure(Kg/cm2) Out put(L/min) Power Weight Kg Size(mm) Option 01 15-35 18-26L/min 2-4HP 31kg 950×360×420 Option 02 15-30 18-26L/min 6.5HP 31kg 710X380X460 Option 03 10-40 18-26L/min 2-3HP 27kg 575X410×430 Option 04 10-40 30-45L/min 3-4HP 30kg 575X410X430
REFERENCE 0340-42
Gasoline-pump configuration · 01
Provide the required duty point, liquid, suction and discharge arrangement, solids conditions and operating schedule. Head and maximum flow are separate references; agree the actual pump curve.
- Speed(rpm)
- 3600
- Configuration reference
5 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 | Option 04 | Option 05 | Option 06 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Option 04 Option 05 Option 06 Outlet Size(mm) 50 80 50 80 100 100 Max.Output(HP) 5.5 6.5 5.5 6.5 13 7 Listed maximum flow (m3/h) 25 40 25 40 130 130 Listed maximum head (m) 36 36 36 36 25 25 Suction(m) 7 7 7 7 6 6
REFERENCE 0340-43
Water-pump configuration · 01
Provide the required duty point, liquid, suction and discharge arrangement, solids conditions and operating schedule. Head and maximum flow are separate references; agree the actual pump curve.
- Configuration reference
2 listed configurations · compare parameters and packing
Configuration | caliber(mm) | Flow(m3/h) | Head (m) | Suction(m) | Speed (rpm) | Priming time (s/4m) | Package size (mm) | N.W(kg) — verify the selected configuration Configuration caliber(mm) Flow(m3/h) Head (m) Suction(m) Speed (rpm) Priming time (s/4m) Package size (mm) N.W(kg) Option 01 50 To confirm To confirm 8 3600 80 To confirm To confirm Option 02 80 To confirm To confirm 8 3600 120 To confirm To confirm
REFERENCE 0340-44
Electric pressure washer · 14
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Optional accessory brief
- 5 m inlet hose; soap bottle; filter; quick connector; case; adjustable nozzle; charger; lithium battery
- Rated voltage
- 21V/36V
- current
- 2.5-15A
- Maximum power
- 280W
- Peak pressure
- 25bar
- Rated flow
- 4.5L/min
REFERENCE 0340-45
Surface-cleaner accessory configuration · 01
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Construction direction
- Stainless-steel patio brush kit
- Connection
- 1/4"Quick Plug
- Diameter
- 16.5-inch
- Max Pressure
- 4000 psi
- Max Water Flow
- 4.0 GPM
- Max Water Temperature
- 104°F
- Weight
- 8lbs
REFERENCE 0340-46
Engine-powered pressure washer · 01
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Connection
- Quick connection
- Configuration | Horse Power(HP) | Revolution(RPM) | Rated.Pressure (Bar) | Rated.Pressure (PSI) | Flow (L/min) | Flow (GPM) | Packing Dim.(mm) | Gross Weight(kg) — verify the selected configuration
- Option 01 | 7 | 3500 | To confirm | To confirm | To confirm | To confirm | 560×550×580 | 40
REFERENCE 0340-47
Electric pressure washer · 15
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Hose-storage brief
- Two storage arrangements; selection to confirm
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Power Cord Length
- 5 M
- Hose Length
- 5 M
- Product Size
- 252*258*820mm
- Carton Size
- 290*280*835mm
- Loading Quantity (20GP/40GP/40HQ)
- 448/896/1008
- N.W/GW
- 10/10.5kgs
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Motor Power 1500W 1600w 1800W Rated Pressure 90bar 100bar 110bar Max Pressure 130bar 140bar 150bar Rated Flow 5.5L/min To confirm 6.0L/min
REFERENCE 0340-48
Electric pressure washer · 16
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Hose-storage brief
- Two storage arrangements; selection to confirm
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Rated Flow
- 5.5L/min
- Power Cord Length
- 5 M
- Hose Length
- 5 M
- Carton Size
- 320*260*490mm
- Loading Quantity (20GP/40GP/40HQ)
- 756/1548/1665
- N.W/GW
- 6.5/7kgs
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 Motor Power 1200W 1400W Rated Pressure 60bar 80bar Max Pressure 90bar 120bar Product Size 248*264*480mm/248*264*680mm To confirm
REFERENCE 0340-49
Compact electric pressure washer · 04
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Threaded connection
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Rated Flow
- 5.5L/min
- Power Cord Length
- 5 M
- Hose Length
- 5 M
- Carton Size
- 235*235*390mm
- Loading Quantity (20GP/40GP/40HQ)
- 1500/3060/3360
- N.W/GW
- 5/5.5kgs
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 Motor Power 1200W 1400W Rated Pressure 60bar 80bar Max Pressure 90bar 120bar Product Size To confirm 206*225*308mm
REFERENCE 0340-50
Gasoline generator configuration · 02
Identify continuous loads and motor-starting demands, voltage, frequency, sockets and installation environment. Confirm rated versus maximum output, starting arrangement and the selected package.
- Engine: Starting system
- Recoil/Electric
- Generator: Rated voltage (V)
- 110/230
- Generator: Rated frequency (Hz)
- 50/60
- Configuration reference
10 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 | Option 04 | Option 05 | Option 06 | Option 07 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Option 04 Option 05 Option 06 Option 07 Engine: Max. output power (HP) 7.0 7.0 7.0 7.0 15 18 18 Engine: Bore × Stroke (mm) 70×55 70×55 70×55 70×55 To confirm 92×69 92×69 Engine: Displacement (cm³) 212 212 212 212 To confirm 460cc 460cc Engine: Fuel tank capacity (L) 15 15 15 15 25 25 25 Engine: Oil capacity (L) 0.6 0.6 0.6 0.6 1.2 1.2 1.2 Generator: Rated output (W) 1300 2000 2500 2800 5000 6000 7000 Generator: Max. output power (W) 1500 2200 2700 3000 5500 6500 7500 N.W./G.W. (Kg) 31/33 33/35 36/38 37.5/39.5 63.5/66.5 68/71 70/73 Carton Size (cm) 61*45.5*45 61*45.5*45 61*45.5*45 61*45.5*45 70*52.5*55.5 70*52.5*55.5 70*52.5*55.5 Loading / 20GP/40GP/40HQ 208/432/544 208/432/544 208/432/544 208/432/544 127/265/333 127/265/333 127/265/333
REFERENCE 0340-51
Gasoline generator configuration · 03
Identify continuous loads and motor-starting demands, voltage, frequency, sockets and installation environment. Confirm rated versus maximum output, starting arrangement and the selected package.
- Engine: Max. output power (HP)
- 7.0
- Engine: Bore × Stroke (mm)
- 70×55
- Engine: Displacement (cm³)
- 212
- Engine: Starting system
- Recoil/Electric
- Engine: Fuel tank capacity (L)
- 15
- Engine: Oil capacity (L)
- 0.6
- Generator: Rated voltage (V)
- 110/230
- Generator: Rated frequency (Hz)
- 50/60
- Carton Size (cm)
- 61*45.5*45
- Loading / 20GP/40GP/40HQ
- 208/432/544
- Configuration reference
3 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 | Option 04 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Option 04 Generator: Rated output (W) 1300 2000 2500 2800 Generator: Max. output power (W) 1500 2200 2700 3000 N.W./G.W. (Kg) 31/33 33/35 36/38 37.5/39.5
REFERENCE 0340-52
Gasoline generator configuration · 04
Identify continuous loads and motor-starting demands, voltage, frequency, sockets and installation environment. Confirm rated versus maximum output, starting arrangement and the selected package.
- Engine: Starting system
- Recoil/Electric
- Engine: Fuel tank capacity (L)
- 25
- Engine: Oil capacity (L)
- 1.2
- Generator: Rated voltage (V)
- 110/230
- Generator: Rated frequency (Hz)
- 50/60
- Carton Size (cm)
- 70*52.5*55.5
- Loading / 20GP/40GP/40HQ
- 127/265/333
- Configuration reference
6 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Engine: Max. output power (HP) 15 18 18 Engine: Bore × Stroke (mm) To confirm 92×69 92×69 Engine: Displacement (cm³) To confirm 460cc 460cc Generator: Rated output (W) 5000 6000 7000 Generator: Max. output power (W) 5500 6500 7500 N.W./G.W. (Kg) 63.5/66.5 68/71 70/73
REFERENCE 0340-53
Gasoline generator configuration · 05
Identify continuous loads and motor-starting demands, voltage, frequency, sockets and installation environment. Confirm rated versus maximum output, starting arrangement and the selected package.
- Engine: Displacement (cm³)
- 63
- Engine: Starting System
- Recoil Start
- Engine: Fuel Tank Capacity (L)
- 4.2
- Generator: Rated Voltage (V)
- 220
- Generator: Rated Frequency (Hz)
- 50
- Generator: Rated Output (W)
- 650
- Generator: Max. Output Power (W)
- 850
- N.W./G.W. (Kg)
- 15.5/16.6
- Carton Size (cm)
- 43*36.5*36.5
- Loading / 20GP/40GP/40HQ
- 454/943/1187
REFERENCE 0340-54
Variable-frequency generator configuration · 01
Identify continuous loads and motor-starting demands, voltage, frequency, sockets and installation environment. Confirm rated versus maximum output, starting arrangement and the selected package.
- Engine: Type Gasoline Engine Type
- Single cylinder, 4-stroke, air-cooled
- Engine: Ignition system
- T.C.I
- Engine: Starting system
- Recoil start
- Engine: Fuel tank capacity (L)
- 12.5
- Engine: Oil capacity (L)
- 0.6
- PowerAlternator / Alternator Wire Material
- Copper
- PowerAlternator / Rated frequency (Hz)
- 50/60
- PowerAlternator / Rated voltage (V)
- 110/230
- L x W x H (cm)
- 45*39*47
- Loading / 20GP/40GP/40HQ
- 315/655/824
- Configuration reference
3 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Engine: Displacement (cc) 212 236 236 PowerAlternator / Rated output power (W) 3000 3500 4000 PowerAlternator / Max output power (W) 3300 3800 4300
REFERENCE 0340-55
Variable-frequency generator configuration · 02
Identify continuous loads and motor-starting demands, voltage, frequency, sockets and installation environment. Confirm rated versus maximum output, starting arrangement and the selected package.
- Engine: Type Gasoline Engine Type
- Single cylinder, 4-stroke, air-cooled
- Engine: Ignition system
- T.C.I
- Engine: Starting system
- Recoil Start
- Engine: Fuel tank capacity (L)
- 12.5
- Engine: Oil capacity (L)
- 0.6
- PowerAlternator / Alternator Wire Material
- Copper
- PowerAlternator / Rated frequency (Hz)
- 50/60
- PowerAlternator / Rated voltage (V)
- 110/230
- L x W x H (cm)
- 45*39*47
- Loading / 20GP/40GP/40HQ
- 315/655/824
- Configuration reference
3 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Engine: Displacement (cc) 212 236 236 PowerAlternator / Rated output power (W) 3000 3500 4000 PowerAlternator / Max output power (W) 3300 3800 4300
REFERENCE 0340-56
Variable-frequency generator configuration · 03
Identify continuous loads and motor-starting demands, voltage, frequency, sockets and installation environment. Confirm rated versus maximum output, starting arrangement and the selected package.
- Engine: Type Gasoline Engine Type
- Single cylinder, 4-stroke, air-cooled
- Engine: Displacement (cc)
- 212
- Engine: Ignition System
- T.C.I
- Engine: Starting System
- Recoil Start
- Engine: Fuel Tank Capacity (L)
- 12.5
- Engine: Oil Capacity (L)
- 0.6
- PowerAlternator / Alternator Wire Material
- Pure Copper Wire
- PowerAlternator / Rated Frequency (Hz)
- 50/60
- PowerAlternator / Rated Voltage (V)
- 110/230
- L x W x H (cm)
- 45*39*47
- Loading / 20GP/40GP/40HQ
- 315/655/824
- Configuration reference
2 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 — verify the selected configuration Parameter Option 01 Option 02 Option 03 PowerAlternator / Rated Output Power (W) 3000 3500 4000 PowerAlternator / Max Output Power (W) 3300 3800 4300
REFERENCE 0340-57
Gasoline-engine configuration · 01
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Engine: Gasoline Engine Type
- Single cylinder, 4-stroke, air-cooled
- Engine: Ignition system
- TCI
- Engine: Starting system
- Recoil / Electric
- Configuration reference
10 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 Engine: Bore × Stroke (mm) 70 × 55 88 × 64 Engine: Displacement (cm³) 212cc 389cc Engine: Max output power (HP) 7.0 13.0 Engine: Max torque (N.M/rpm) 12/2500 26.5/2500 Engine: Fuel tank capacity (L) 4 6 Engine: Oil capacity (L) 0.6 1.2 N.W. (Kg) 12.5 29 G.W. (Kg) 13.5 30 Carton size (cm) 38*32.5*35.5 50*44*50 Loading / 20GP/40HQ 657/1718 To confirm
REFERENCE 0340-58
Gasoline water-pump configuration · 01
Provide the required duty point, liquid, suction and discharge arrangement, solids conditions and operating schedule. Head and maximum flow are separate references; agree the actual pump curve.
- Engine: Type
- Single cylinder, 4-stroke, air-cooled
- Engine: Bore × Stroke (mm)
- 70×55
- Engine: Displacement (cm³)
- 212
- Engine: Ignition system
- TCI
- Engine: Starting system
- Recoil / Electric
- Engine: Fuel tank capacity (L)
- 3.6
- Engine: Oil capacity (L)
- 0.6
- PumpWater Pump / Suction (m)
- 7
- Carton size (cm)
- 50.5*43.5*41.5
- Loading / 20GP/40HQ
- 324/847
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 PumpWater Pump / Max. lift (m) 55±2 80±2 PumpWater Pump / Max. flux (m³/h) 30±2 20±2 N.W. Net weight (Kg) 26 27 G.W. Gross weight (Kg) 27 28
REFERENCE 0340-59
Gasoline water-pump configuration · 02
Provide the required duty point, liquid, suction and discharge arrangement, solids conditions and operating schedule. Head and maximum flow are separate references; agree the actual pump curve.
- Engine: Type
- Single cylinder, 4-stroke, air-cooled
- Engine: Bore × Stroke (mm)
- 70×55
- Engine: Displacement (cm³)
- 212
- Engine: Ignition system
- TCI
- Engine: Starting system
- Recoil / Electric
- Engine: Fuel tank capacity (L)
- 3.6
- Engine: Oil capacity (L)
- 0.6
- PumpWater Pump / Max. lift (m)
- 25±2
- PumpWater Pump / Suction (m)
- 7
- PumpWater Pump / Max. flux (m³/h)
- 55±2
- N.W. Net weight (Kg)
- 37
- G.W. Gross weight (Kg)
- 38
- Carton size (cm)
- 56.5*44.5*45
- Loading / 20GP/40HQ
- 243/634
REFERENCE 0340-60
Gasoline-engine configuration · 02
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Engine: Gasoline Engine Type
- Single cylinder, 4-stroke, air-cooled
- Engine: Ignition system
- TCI
- Engine: Starting system
- Recoil Start / Electric Start
- Configuration reference
10 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 Engine: Bore × Stroke (mm) 70 × 55 88 × 64 Engine: Displacement (cm³) 212cc 389cc Engine: Max output power (HP) 7.0 13.0 Engine: Max torque (N.M/rpm) 12/2500 26.5/2500 Engine: Fuel tank capacity (L) 4 6 Engine: Oil capacity (L) 0.6 1.2 N.W. (Kg) 12.5 29 G.W. (Kg) 13.5 30 Carton size (cm) 38*32.5*35.5 50*44*50 Loading / 20GP/40HQ 657/1718 To confirm
REFERENCE 0340-61
Gasoline water-pump configuration · 03
Provide the required duty point, liquid, suction and discharge arrangement, solids conditions and operating schedule. Head and maximum flow are separate references; agree the actual pump curve.
- Engine: Type
- Single cylinder, 4-stroke, air-cooled
- Engine: Bore × Stroke (mm)
- 70×55
- Engine: Displacement (cm³)
- 212
- Engine: Ignition system
- TCI
- Engine: Starting system
- Recoil / Electric
- Engine: Fuel tank capacity (L)
- 3.6
- Engine: Oil capacity (L)
- 0.6
- PumpWater Pump / Suction (m)
- 7
- Carton size (cm)
- 50.5*43.5*41.5
- Loading / 20GP/40HQ
- 324/847
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 PumpWater Pump / Max. lift (m) 55±2 80±2 PumpWater Pump / Max. flux (m³/h) 30±2 20±2 N.W. (Kg) 26 27 G.W. (Kg) 27 28
REFERENCE 0340-62
Gasoline water-pump configuration · 04
Provide the required duty point, liquid, suction and discharge arrangement, solids conditions and operating schedule. Head and maximum flow are separate references; agree the actual pump curve.
- Engine: Type
- Single cylinder, 4-stroke, air-cooled
- Engine: Ignition system
- TCI
- Engine: Starting system
- Recoil / Electric
- PumpWater Pump / Suction (m)
- 8
- Configuration reference
11 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Engine: Bore × Stroke (mm) 70×55 70×55 To confirm Engine: Displacement (cm³) 212cc 212cc To confirm Engine: Max output power (HP) 7.0 7.0 13.0 Engine: Fuel tank capacity (L) 3.6 3.6 6 Engine: Oil capacity (L) 0.6 0.6 1.2 PumpWater Pump / Max. lift (m) To confirm 26±2 30±2 PumpWater Pump / Max. flux (m³/h) To confirm 60±2 90±2 N.W. (Kg) To confirm 19 50 G.W. (Kg) To confirm 21 52 Carton size (cm) To confirm 51.5*38*42.5 61.5*49.5*55 Loading / 20GP/40HQ 370/966 324/847 To confirm
REFERENCE 0340-63
Pressure-sprayer configuration · 01
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Configuration reference
4 listed configurations · compare parameters and packing
Configuration | Carton size — verify the selected configuration Configuration Carton size Option 01 45x47.5x67.5cm Option 02 45x51.5x67.5cm Option 03 45×57.5x67.5cm Option 04 37×29×67cm
REFERENCE 0340-64
Pressure-sprayer configuration · 02
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Configuration reference
7 listed configurations · compare parameters and packing
Configuration | Carton Size — verify the selected configuration Configuration Carton Size Option 01 56x37.5x37cm Option 02 56x38x42.5cm Option 03 56x37.5x45cm Option 04 56x37.5×53cm Option 05 56x37.5x53.5cm Option 06 56x37.5×56cm Option 07 56x37.5x63cm
REFERENCE 0340-65
Garden equipment configuration · 07
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
REFERENCE 0340-66
Portable seeder
Provide seed or plant dimensions, soil conditions, spacing and application requirements. Confirm the hopper, metering or planting mechanism and packing against a sample.
- Construction direction
- Portable seeder
- Seed brief
- Corn; soybean; peanut; cotton; seed suitability to confirm
- Seeds per hole
- 1-3
- Seed capacity reference
- 1-3 kg
- Gross / net weight
- 2.5 / 2.2 kg
- Carton
- 81x45x46 cm; 9 pieces
- Listed load (20FT / 40HQ)
- 1500 / 3650 pieces; packing to confirm
REFERENCE 0340-67
Hand-push fertilizer seeder
Provide seed or plant dimensions, soil conditions, spacing and application requirements. Confirm the hopper, metering or planting mechanism and packing against a sample.
- Construction direction
- Hand-push fertilizer seeder
- Mouth selection
- 7 / 6 / 5; adjustable
- Spacing reference
- 20-33 cm
- Seed brief
- Corn; soybean; peanut; cotton; suitability to confirm
- Fertilizer brief
- Powder or solid; compatibility to confirm
- Seeds per hole
- 1-2
- Seed capacity reference
- 2-3 kg
- Fertilizer capacity reference
- 2-3.5 kg
- Gross / net weight
- 12.3 / 11 kg
- Carton
- 56x34x58 cm; 1 piece
- Listed load (20FT / 40HQ)
- 260 / 620 pieces; packing to confirm
REFERENCE 0340-68
Seeder or planting equipment
Provide seed or plant dimensions, soil conditions, spacing and application requirements. Confirm the hopper, metering or planting mechanism and packing against a sample.
REFERENCE 0340-69
Air-blower development direction
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
REFERENCE 0340-70
Knapsack sprayer configuration · 03
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Configuration reference
3 listed configurations · compare parameters and packing
Configuration | Carton Size — verify the selected configuration Configuration Carton Size Option 01 33.5x18x47.5cm Option 02 35.5×19.5×50.5cm Option 03 40x21.5x51cm
REFERENCE 0340-71
Knapsack sprayer configuration · 04
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Configuration reference
4 listed configurations · compare parameters and packing
Configuration | Carton Size — verify the selected configuration Configuration Carton Size Option 01 34.2x18x46.5cm Option 02 36x18x51.3cm Option 03 36x18x51.3cm Option 04 37.5x20.5x51.3cm
REFERENCE 0340-72
Lithium-battery sprayer configuration · 04
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Battery construction
- Removable-battery arrangement
- Configuration | Battery | Carton Size — verify the selected configuration
- Option 01 | 12V,2.0AH/18V;2.5AH 12V,2.5AH/18V,4AH | 43.5x36x29.5cm
REFERENCE 0340-73
Lithium-battery sprayer configuration · 05
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Battery construction
- Removable-battery arrangement
- Configuration reference
5 listed configurations · compare parameters and packing
Configuration | Battery | Carton Size — verify the selected configuration Configuration Battery Carton Size Option 01 12V,8AH 32×19.5×51.5cm Option 02 12V,8AH 30x24×55cm Option 03 12V,8AH 32x19.5x51.5cm Option 04 12V,8AH 30x24×55cm Option 05 12V,8AH 30x24x55cm
REFERENCE 0340-74
Lithium-battery sprayer configuration · 06
Confirm the tank construction, intended liquid, nozzle and lance, battery and charger if applicable, seals, packing and destination. Match compatibility and operating instructions to the actual use.
- Tank material reference
- PE
- Display component
- Voltmeter
- Storage component
- Independent lance buckle
- Pump / control
- Diaphragm pump with speed regulator
- Configuration reference
4 listed configurations · compare parameters and packing
Configuration | Battery | Carton Size — verify the selected configuration Configuration Battery Carton Size Option 01 12V,2.5AH/18V,4AH 30x24x55cm Option 02 12V,2.5AH/18V,4AH 31×22×51.5cm Option 03 12V,2.5AH/18V,4AH 30x24x55cm Option 04 12V2.5AH/18V/4AH 32x26x55cm
REFERENCE 0340-75
Gasoline-pump configuration · 02
Provide the required duty point, liquid, suction and discharge arrangement, solids conditions and operating schedule. Head and maximum flow are separate references; agree the actual pump curve.
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Outlet Size(mm) 50 80 100 Max.Output(HP) 5.5 6.5 13 Listed maximum head (m) 36 36 25 Suction(m) 7 7 6
REFERENCE 0340-76
Gasoline-engine selection
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Configuration reference
7 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 | Option 04 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Option 04 Bore*stroke(mm) 56x38 68x45 68x54 70x55 Displacement(ml) 94 163 196 212 Max.power kW(HP)/min-1 2.2(3.0)/3,600 To confirm To confirm 5.2(7.0)/3,600 Fuel tank capacity (L) 1.6 3.6 3.6 3.6 Oil capacity (L) 0.35 0.6 0.6 0.6 Net weight(kg) 9.5 15 17 17 Package dimensions (mm) 315x310×305 400x350×385 400x350x385 400×350×385
REFERENCE 0340-77
Water-pump configuration · 02
Provide the required duty point, liquid, suction and discharge arrangement, solids conditions and operating schedule. Head and maximum flow are separate references; agree the actual pump curve.
- Pump construction
- Cast-iron volute and impeller; full-frame construction
- Configuration reference
2 listed configurations · compare parameters and packing
Configuration | Caliber(mm) | Flow(m3/h) | Head (m) | Suction (m) | Speed (rpm) | Package size (mm) | N.W (kg) — verify the selected configuration Configuration Caliber(mm) Flow(m3/h) Head (m) Suction (m) Speed (rpm) Package size (mm) N.W (kg) Option 01 50 22 63 7 3600 510×385x420 27 Option 02 80 80 20 7 3600 725×520×660 61
REFERENCE 0340-78
Water-pump configuration · 03
Provide the required duty point, liquid, suction and discharge arrangement, solids conditions and operating schedule. Head and maximum flow are separate references; agree the actual pump curve.
- Pump construction
- Cast-iron volute and impeller; full-frame construction
- Configuration reference
2 listed configurations · compare parameters and packing
Configuration | Style | Out put (m3/h) | Fuel Tank Capacity | Weight | Size(mm) — verify the selected configuration Configuration Style Out put (m3/h) Fuel Tank Capacity Weight Size(mm) Option 01 Centrifugal pump 30 3.6L 10kgs 485x375x395mm Option 02 Centrifugal pump 60 3.6L 12kgs 505×385×415mm
REFERENCE 0340-79
Vibrator-drive equipment
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Bore*stroke(mm)
- 70×55
- Displacement(ml)
- 212
- Max.power kW(HP)/min-1
- 5.2(7.0)/3,600
- Fuel tank capacity (L)
- 3.6
- Ol capacity(L)
- 0.6
- Net weight (kg)
- 17
- Package dimensions(mm)
- 400x350x385
- Qty/20GP/40GP/40HQ
- 550/1120/1120
REFERENCE 0340-80
Water-pump configuration · 04
Provide the required duty point, liquid, suction and discharge arrangement, solids conditions and operating schedule. Head and maximum flow are separate references; agree the actual pump curve.
- Pump construction
- Cast-iron volute and impeller; full-frame construction
- Configuration reference
2 listed configurations · compare parameters and packing
Configuration | Callber(mm) | Flow(m3//h) | Head (m) | Suction (m) | Speed (rpm) | Package size (mm) | N.W(kg) — verify the selected configuration Configuration Callber(mm) Flow(m3//h) Head (m) Suction (m) Speed (rpm) Package size (mm) N.W(kg) Option 01 50 To confirm To confirm 8 3600 To confirm To confirm Option 02 80 To confirm To confirm 7 3600 To confirm To confirm
REFERENCE 0340-81
Electric pressure washer · 17
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Optional accessory brief
- 5 m inlet hose; soap bottle; filter; quick connector; case; adjustable nozzle; charger; lithium battery
- Direction
- Self-priming lithium electric pump
- Rated voltage
- 21V/36V
- current
- 2.5-15A
- Maximum power
- 280W
- Peak pressure
- 25bar
- Rated flow
- 4.5L/min
REFERENCE 0340-82
Electric pressure washer · 18
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Optional accessory brief
- 5 m inlet hose; soap bottle; filter; quick connector; case; adjustable nozzle; charger; lithium battery
- Direction
- Portable washer
- Rated voltage
- 21V/36V
- current
- 2.5-15A
- Maximum power
- 280W
- Peak pressure
- 25bar
- Rated flow
- 4.5L/min
REFERENCE 0340-83
Surface-cleaner accessory configuration · 02
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Construction direction
- Stainless-steel patio brush kit
- Connection
- 3/8"Quick Plug
- Diameter
- 20-inch
- Max Pressure
- 4200 psi
- Min Flow
- 2.0 GPM
- Max Water F low
- 4.0 GPM
- Max Water Temperature
- 104°F
REFERENCE 0340-84
Engine-powered pressure washer · 02
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Connection
- Quick connection
- Configuration | Horse Power(HP) | Revolution(RPM) | Rated.Pressure (Bar) | Rated.Pressure (PSI) | Flow (L/min) | Flow (GPM) | Packing Dim.(mm) | Gross Weight(kg) — verify the selected configuration
- Option 01 | 11 | 3500 | To confirm | To confirm | To confirm | To confirm | 560×550×580 | 40
REFERENCE 0340-85
Induction-motor pressure washer · 01
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Threaded connection
- Accessory reference
- 7 m pressure hose; 1.8 m inlet hose; Short gun; Connector set; Soap bottle; Sponge
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Rated Flow
- 6L/min
- Hose Length
- 7 M
- Product Size
- 315*207*234mm
- Carton Size
- 352*250*270mm
- Configuration reference
5 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 — verify the selected configuration Parameter Option 01 Option 02 Motor Type Induction To confirm Motor Power 800W 1000W Rated Pressure 60bar 80bar Max Pressure To confirm 110bar NW/G.W 7.5/8kgS 7.5/8kgs
REFERENCE 0340-86
Induction-motor pressure washer · 02
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Threaded connection
- Accessory reference
- 7 m pressure hose; 1.8 m inlet hose; Short gun; Connector set; Soap bottle; Sponge
- Hose Length
- 7 M
- Product Size
- 315*207*234mm
- Carton Size
- 352*250*270mm
- N.W/G.W
- 7.5/8kgs
- Configuration reference
6 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 | Option 04 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Option 04 Motor Type Induction To confirm To confirm To confirm Motor Power 800W 1000W To confirm To confirm Volt/Freq To confirm To confirm To confirm AC220V-240V-50/60HZ AC100V-127V-50/60HZ Rated Pressure 60bar 80bar 60bar To confirm Max Pressure 90bar To confirm To confirm To confirm Rated Flow To confirm 6L/min 6L/min 6L/min
REFERENCE 0340-87
Induction-motor pressure washer · 03
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Threaded connection
- Accessory reference
- 7 m pressure hose; 1.8 m inlet hose; Short gun; Connector set; Soap bottle; Sponge
- Product Size
- 315*207*234mm
- Carton Size
- 352*250*270mm
- Configuration reference
9 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 | Option 04 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Option 04 Motor Type Induction Induction Induction To confirm Motor power 800W 1000W 800W 1000W Volt/Freq AC220V-240V-50/60HZ AC100V-127V-50/60HZ AC220V-240V-50/60HZ AC100V-127V-50/60HZ To confirm AC220V-240V-50/60HZ AC100V-127V-50/60HZ Rated Pressure 60bar 80bar 60bar 80bar Max Pressure 90bar 110bar 90bar To confirm Rated Flow 6L/min 6L/min 6L/min To confirm Power Cord Length 5 M 5 M To confirm To confirm Hose length 5M 5 M 7 M 7 M NW/G.W 7.5/8kg 7.5/8kgs 7.5/8kgs 7.5/8kgs
REFERENCE 0340-88
Electric pressure washer · 19
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Threaded connection
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Rated Flow
- 5.5L/min
- Power Cord Length
- 5 M
- Product Size
- 349*217*271mm
- Carton Size
- 360*275*290mm
- Loading Quantity (20GP/40GP/40HQ)
- 1024/2112/2376
- Configuration reference
6 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 | Option 04 | Option 05 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Option 04 Option 05 Motor Type Carbon Brush Carbon Brush Carbon Brush Induction Induction Motor Power 1200W 1400W 1500W To confirm 1400W Rated Pressure 65bar 70bar 90bar 65bar 70bar Max Pressure 100bar 110bar 130bar 100bar 110bar Hose Length 5 M 5 M 5M 5 M 5 M NWGW 5/5.5kgs 5/5.5kgs 8/8.5kgs 8/8.5kgs 8/8.5kgs
REFERENCE 0340-89
Wall-mounted pressure washer
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Hose-storage brief
- Two storage arrangements; selection to confirm
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Volt/Freq
- AC220V-240V-50/60HZ AC100V-127V-50/60HZ
- Power Cord Length
- 5 M
- Hose Length
- 5 M
- Product Size
- 252*258*820mm
- Carton Size
- 290*280*835mm
- Loading Quantity (20GP/40GP/40HQ)
- 448/896/1008
- NW/GW
- 10/10.5kgs
- Configuration reference
4 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Motor Power 1500W 1600W 1800W Rated Pressure 90bar 100bar 110bar Max Pressure 130bar 140bar 150bar Rated Flow 5.5L/min 5.5L/min 6.0L/min
REFERENCE 0340-90
Electric pressure washer · 20
Specify the working task, required capacity, electrical or engine arrangement, accessories and destination. Confirm the selected configuration and current documentation before ordering.
- Pump construction
- Wobble-plate pump; three stainless pistons
- Control reference
- Automatic total-stop system
- Protection component
- Built-in thermal protector; operating limits to confirm
- Connection
- Quick connection
- Hose-storage brief
- Two storage arrangements; selection to confirm
- Accessory reference
- Spray-gun set; Inlet connector; Nozzle-cleaning pin; 5 m pressure hose; 5 m power cord
- Motor Type
- Carbon Brush
- Power Cord Length
- 5 M
- Hose Length
- 5 M
- Product Size
- 272*265*550mm
- Carton Size
- 310*330*565mm
- Loading Quantity (20GP/40GP/40HQ)
- 532/1064/1216
- N.W/Gw
- 10/10.5kgs
- Configuration reference
5 listed configurations · compare parameters and packing
Parameter | Option 01 | Option 02 | Option 03 — verify the selected configuration Parameter Option 01 Option 02 Option 03 Motor Power 1500W 1600W 1800W Volt/Freq AC220V-240V-50/60HZ AC100V-127V-50/60HZ To confirm AC220V-240V-50/60HZ AC100V-127V-50/60HZ Rated Pressure 90bar 100bar 110bar Max Pressure 130bar 140bar 150bar Rated Flow 5.5L/min 5.5L/min 6.0L/min
Reference tables describe listed configurations. Confirm the exact model, complete unit, operating conditions and current quotation. To confirm marks a missing, conflicting or unresolved field; no value is reconstructed. Equipment photos and category appearance do not define the production specification.
What matters for this category
A better brief.
A clearer comparison.
Focus the sourcing conversation on the features, materials and production details that make a difference to your product range.
Specify the working system
Compare the full motor or engine, pump, hose, nozzle, fittings and electrical supply together. This helps reveal configuration differences that a headline pressure or power figure misses.
Keep commercial details item-specific
Request quantities by configuration, sample terms, artwork, labels and carton limits. Confirm current minimums and lead times after the selected specification is agreed.
Coordinate inspection and shipping
Define incoming, assembly, functional and packing checks with current product documents. Agree consumables, spares, transport conditions and claim procedures for the order.
Branding, configuration & packaging
Make the product
fit your programme.
Bring artwork, reference samples and a target cost. The available process, minimum quantity, sample charges and development scope are reviewed for the chosen option.
Configuration selection
Provide electrical supply, load or duty point, tank and fluid requirements, connection drawings and complete accessory list. Request feasibility for the exact selected build.
Marking and packaging
Submit artwork, destination labels, instructions and carton requirements. Ask for sample approval, minimum quantities and costs for the chosen configuration.
Samples and consolidation
Agree working samples, acceptance criteria and configuration-level quantities. Confirm packed dimensions, weights and shipping documents before consolidation.
Quality & product evidence
Turn requirements
into checks.
Agree which product characteristics need testing and how the approved sample relates to the bulk order.
Functional acceptance
Agree tests for flow and pressure at a defined operating point, generator loading or starting, leaks, electrical operation and supplied accessories, as appropriate.
Material and fit checks
Confirm tank, seal, fitting, pump, shaft and mounting materials and dimensions against the selected use. Request a model-specific component schedule.
Documentation and follow-up
Request current destination evidence and operating instructions, with warranty scope, spare parts and service terms agreed in the order.
Test capability is a starting point for the inspection plan. Request the method, applicable model and results needed for your order.
Documents matched to the order
Ask for evidence
that fits the product.
Equipment selection requires documents for the exact configuration and destination. General catalogue statements do not establish current certification or suitability.
State the sales market, intended users and required files in your first enquiry. Current validity and scope are checked for the selected supplier and product; a category description does not certify every item.
Share your document requirements ↗- Technical schedule
- Request the exact electrical ratings, pump curve, output basis, interfaces, tank and component materials, accessories and packing.
- Market and transport evidence
- Specify destination requirements and ask for current model-specific test reports, declarations, battery transport evidence where relevant, labels and instructions.
- Order acceptance record
- Keep approved samples, drawings, inspection criteria, carton details and agreed after-sales terms together.
Built around how you sell
Different buyers.
Different specifications.
Your sales channel changes the assortment, packaging and quality priorities. Tell us the intended use as well as the product name.
Garden and agricultural purchasing
Define the plants, soil, liquid, area and working routine, then select the actual spraying, pumping or planting arrangement.
Vehicle and property cleaning
Share the surfaces, cleaning frequency, water and electrical supply, mobility and accessory requirements.
Power and equipment programmes
List the electrical loads or pump duty, operating environment, acceptance tests, spares and destination.
From first brief to a defined order
One contact.
A practical next step.
Samples, commercial terms and responsibilities are agreed for the project. Use the same product and packing specification when comparing quotations.
Share the requirement
Product, reference image, quantity, sales market and timing.
Compare suitable options
Review configuration, materials, sample scope and relevant documents.
Approve the specification
Agree artwork, packaging, sample, testing and inspection criteria.
Confirm the order plan
Set price, payment, production, delivery and defect remedies in writing.
Buyer questions
Before you send
your first enquiry.
Practical answers about this sourcing direction, customization and the reference options. Your agreed specification and written quotation determine the actual order.
What should I send for an equipment quotation?
Provide the task, required capacity or duty point, electrical supply or fuel, quantities, destination, accessories, sample needs and packaging.
Is maximum pressure the normal working pressure?
Use the separately confirmed rated working pressure and conditions for selection. A maximum figure alone does not define continuous cleaning performance.
Do maximum pump flow and head occur together?
Use a pump curve and defined duty point. Maximum head and maximum flow describe separate limits unless an operating point is explicitly specified.
Can I choose a different battery or charger?
Send nominal voltage, capacity, interface and charger requirements. Request compatibility confirmation for the selected equipment; title classes do not establish interchangeability.
What matters for sprayer selection?
Define the intended liquid, tank, seals, nozzle, lance, pump control, carrying arrangement, operating instructions and required destination documents.
Are spraying and planting results guaranteed?
Agree the intended use and a sample or trial under defined conditions. Liquid compatibility, application settings, seed and soil conditions require their own checks.
How should generator output be compared?
Separate rated and maximum output and specify voltage, frequency, sockets, continuous loads and motor-starting demand. Confirm the actual supplied configuration.
Are operating times fixed?
Request a defined test basis including load, fuel or battery capacity, ambient conditions and accessories. Operating time depends on the selected build and use.
Can I specify private-label packaging?
Send artwork, labels, instructions and carton limits with quantities. Feasibility, sample approval, costs and minimums require confirmation.
Are all shown accessories included?
Ask the quotation to identify standard and optional components, lengths, fittings, consumables, batteries and chargers for the selected configuration.
What documents are available?
State the destination and exact product, then request current model-specific technical and market evidence, instructions and transport documents where relevant.
How are samples, inspection and lead times handled?
Agree sample scope, acceptance tests, minimum quantities, production schedule and shipment terms for each chosen configuration before ordering.
Who handles my enquiry?
Factory Sourcing Hub handles this enquiry as an independent sourcing and trading service. The product route, supplier suitability, sample scope and order responsibilities are agreed for the actual project.
How do I get a price and order minimum?
Send the product reference, quantities per variation, customization and packaging. Prices, minimums, sample charges and delivery dates are confirmed in a current quotation; the page is not a live inventory or price feed.
Can I discuss samples and inspection before ordering?
Yes. State whether you need a reference sample, a customized sample or development work. Agree the sample cost and shipping, approval specification, inspection plan and remedy for non-conforming goods before the bulk order.
What should I attach to my email?
Reference images, drawings, logo artwork and a product list are useful. Include quantities, the intended users and sales market, packaging, required documents and timing. After submitting the form, email attachments to kunhuow@gmail.com with your enquiry reference.
Tell us what you are planning
Your next order
starts with a brief.
A reference picture or a short description is enough to begin. Add the details you already know; the optional fields help make the follow-up more useful.
- Working task, load or duty point and intended destination
- Voltage/frequency, fuel or battery interface and complete accessories
- Quantities, sample approval, tests, documents and labels
- Carton requirements, spare parts and requested shipment terms
Download the enquiry checklist ↓
Independent sourcing and trading service. Supplier choice, service costs and order conditions are discussed for your project.
Discuss your requirements.
Product selection, customization, samples and quotation enquiries.
Explore other sourcing directions
More options for
your product list.
Compare separate product ranges and prepare a brief that fits your assortment.
Sprayers, Pumps, Generators & Garden Machinery Sourcing
Source agricultural sprayers, plunger pumps, generator configurations, water pumps, garden machinery, bare engines, pressure washers and matched accessories.
Explore this service ↗
Generators, Water Pumps, Pressure Washers & Forklift Sourcing
Compare gasoline, diesel and inverter generators, engines, powered water pumps, pressure washers, forklifts and warehouse handling equipment with model-specific procurement support.
Explore this service ↗
Sprayers, Garden Machinery, Fertilizer Equipment & Plastic Goods Sourcing
Source sprayers, fertilizer devices, garden machinery, pump equipment, repair components and waste sorting containers with the tank, drive, nozzle, electrical, packing and document requirements brought into one enquiry.
Explore this service ↗
Sprayers, Garden Watering, Irrigation Kits & Cleaning Accessories Sourcing
Source manual, battery and engine sprayers, larger wheeled and trailed systems, watering cans, hose reels, nozzles, tap fittings, timers, sprinklers, drip kits, cleaning brushes and replacement parts.
Explore this service ↗Information basis: published product information reviewed . Reference details support a sourcing discussion. Current supply, samples and product-specific documents are confirmed for the selected item.