Variable-speed chain lifting
Standard, in-line-slide and intelligent control layouts, with separate chain size, hook arrangement, duty and electrical references.
Enquire about this range ↗Independent lifting & pulling procurement
Hoists, winches & marine line handling
Electric Hoists, Winches & Marine Windlass Sourcing
Source electric chain and wire-rope hoists, beam trolleys, mounting frames, braked drives, DC winches, hand winches, marine windlasses and matched controls.
- Keep suspended lifting, line pulling and marine anchor handling as separate duties
- Compare full hook, travel, supply, mounting, rope-layer and packing configurations
- Coordinate drawings, selected-article documents, samples and shipment requirements
Manufacturing, product documents and order conditions depend on the model and supply route selected for your project.
Start with a product reference, intended use and estimated quantity. We bring product selection, sample questions and quotation details into one conversation.
Email your reference image ↗LiftingChain, rope, AC/DC, trolley and mounting-frame directions
PullingElectric, portable, strap and manual winch constructions
MarineWindlass, capstan, hauling and control-system enquiries
ProcurementApplication brief, configuration review and quotation coordination
Explore the product range
Build the range
your buyers need.
Choose a focused product or discuss a coordinated assortment. Each direction can be developed into a more specific model and packaging brief.
Wire-rope lifting controls
Standard, sliding and intelligent rope-lifting devices; approve actual loaded speed, motor, reeving and wire-rope specification together.
Enquire about this range ↗Compact AC wire-rope hoists
Distinct voltage, single/double-hook and packing configurations, including regular travel, extended travel, lower-speed and higher-speed constructions.
Enquire about this range ↗Suspended and enclosed hoists
Suspended layouts and compact enclosed references with their own mounting, hook, control and packing details.
Enquire about this range ↗Long-travel rope lifting
Long-rope references require drum winding, rope diameter, travel limits and mounting clearance approval.
Enquire about this range ↗DC lifting units
Separate selected-voltage DC hoists with single or double reeving; confirm motor winding, protection, cable and duty.
Enquire about this range ↗Chain-hoist configurations
Single-hook chain lifting with article-specific motor/speed pairs, chain diameter, travel and packing requirements.
Enquire about this range ↗Beam travel and rigging interfaces
Powered beam trolleys, supported manual-trolley connections and original pulley/rigging enquiries. Standalone pulleys need a current drawing, load and compatibility check.
Enquire about this range ↗Rotary and extending frames
Different reach/load pairs and mounting envelopes; folding or extending arrangements must match the selected frame drawing.
Enquire about this range ↗Braked geared drives
Distinct voltage, output speed, torque and mounting requirements for geared components, separate from the capacity of a complete hoist.
Enquire about this range ↗DC pulling winches
Compact and heavy pulling ranges, first-layer performance points, layer-dependent pull, wire rope, drums and mounting patterns.
Enquire about this range ↗Portable and strap pulling
Portable constructions, manual hand-crank provisions, strap versions and separate cable/strap hand winches; application-labelled loads require exact test-condition approval.
Enquire about this range ↗Marine anchor handling
Low-profile, round, drum-equipped and higher-output windlass directions with separate chain/rope interfaces and deck-space requirements.
Enquire about this range ↗Marine rope and line handling
Capstan, line-hauling and supported hauling directions require the actual rope, working load, motor, installation and vessel assessment.
Enquire about this range ↗Controls and protection components
Solenoids, reversing solenoids, circuit breakers, rocker panels, safety-switch panels, foot controls and radio transmitters/receivers.
Enquire about this range ↗Reference product directions
Start with a product.
Define the details.
Use these options to describe what you are buying. The public references identify your enquiry; the final model and specification are confirmed before an order.
REFERENCE 0321-01
Variable-speed electric chain hoist — 100 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 100 kg
- Listed lifting speed
- 0–18 m/min
- Lifting height
- 5 m
- Rated power
- 450 W
- Listed supply
- AC 220 V
- Rated current
- 3.5 A
- Insulation class
- B
- Chain diameter
- 4.0 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 13.4 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-02
Variable-speed electric chain hoist — 200 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 200 kg
- Listed lifting speed
- 0–9 m/min
- Lifting height
- 5 m
- Rated power
- 450 W
- Listed supply
- AC 220 V
- Rated current
- 3.5 A
- Insulation class
- B
- Chain diameter
- 4.0 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 13.4 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-03
Variable-speed electric chain hoist — 250 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 250 kg
- Listed lifting speed
- 0–20 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 29.9 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-04
Variable-speed electric chain hoist — 500 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 500 kg
- Listed lifting speed
- 0–10 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 29.9 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-05
Variable-speed electric chain hoist — 1000 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 1000 kg
- Listed lifting speed
- 0–5 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 36.8 kg
- Reeving configuration
- Double hook, as labeled
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-06
Variable-speed electric chain hoist — 100 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 100 kg
- Listed lifting speed
- 0–18 m/min
- Lifting height
- 5 m
- Rated power
- 450 W
- Listed supply
- AC 120 V
- Rated current
- 7 A
- Insulation class
- B
- Chain diameter
- 4.0 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 13.4 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-07
Variable-speed electric chain hoist — 200 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 200 kg
- Listed lifting speed
- 0–9 m/min
- Lifting height
- 5 m
- Rated power
- 450 W
- Listed supply
- AC 120 V
- Rated current
- 7 A
- Insulation class
- B
- Chain diameter
- 4.0 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 13.4 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-08
Variable-speed electric chain hoist — 250 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 250 kg
- Listed lifting speed
- 0–20 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 29.9 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-09
Variable-speed electric chain hoist — 500 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 500 kg
- Listed lifting speed
- 0–10 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 29.9 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-10
Variable-speed electric chain hoist — 1000 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 1000 kg
- Listed lifting speed
- 0–5 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 36.8 kg
- Reeving configuration
- Double hook, as labeled
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-11
Variable-speed electric chain hoist — 250 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 250 kg
- Listed lifting speed
- 0–20 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 380 V
- Rated current
- 3 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 29.9 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-12
Variable-speed electric chain hoist — 500 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 500 kg
- Listed lifting speed
- 0–10 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 380 V
- Rated current
- 3 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 29.9 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-13
Variable-speed electric chain hoist — 1000 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 1000 kg
- Listed lifting speed
- 0–5 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 380 V
- Rated current
- 3 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 36.8 kg
- Reeving configuration
- Double hook, as labeled
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-14
In-line-slide variable-speed chain hoist — 100 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 100 kg
- Listed lifting speed
- 0–18 m/min
- Lifting height
- 5 m
- Rated power
- 450 W
- Listed supply
- AC 220 V
- Rated current
- 3.5 A
- Insulation class
- B
- Chain diameter
- 4.0 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 15.4 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-15
In-line-slide variable-speed chain hoist — 200 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 200 kg
- Listed lifting speed
- 0–9 m/min
- Lifting height
- 5 m
- Rated power
- 450 W
- Listed supply
- AC 220 V
- Rated current
- 3.5 A
- Insulation class
- B
- Chain diameter
- 4.0 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 15.4 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-16
In-line-slide variable-speed chain hoist — 250 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 250 kg
- Listed lifting speed
- 0–20 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 32 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-17
In-line-slide variable-speed chain hoist — 500 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 500 kg
- Listed lifting speed
- 0–10 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 32 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-18
In-line-slide variable-speed chain hoist — 100 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 100 kg
- Listed lifting speed
- 0–18 m/min
- Lifting height
- 5 m
- Rated power
- 450 W
- Listed supply
- AC 120 V
- Rated current
- 7 A
- Insulation class
- B
- Chain diameter
- 4.0 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 15.4 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-19
In-line-slide variable-speed chain hoist — 200 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 200 kg
- Listed lifting speed
- 0–9 m/min
- Lifting height
- 5 m
- Rated power
- 450 W
- Listed supply
- AC 120 V
- Rated current
- 7 A
- Insulation class
- B
- Chain diameter
- 4.0 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 15.4 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-20
In-line-slide variable-speed chain hoist — 250 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 250 kg
- Listed lifting speed
- 0–20 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 32 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-21
In-line-slide variable-speed chain hoist — 500 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 500 kg
- Listed lifting speed
- 0–10 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 32 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-22
In-line-slide variable-speed chain hoist — 250 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 250 kg
- Listed lifting speed
- 0–20 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 380 V
- Rated current
- 3 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 32 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-23
In-line-slide variable-speed chain hoist — 500 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 500 kg
- Listed lifting speed
- 0–10 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 380 V
- Rated current
- 3 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 32 kg
- Motor construction
- Brushless motor
- Body material
- Aluminium body; current finish and material schedule to approve
- Chain-drive construction
- Machined six-groove sprocket
- Handle switch
- Low-voltage contactless magnetic control
- Operator controls
- Emergency-stop switch; current circuit and functional test required
REFERENCE 0321-24
Intelligent chain-hoist control configuration — 100 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 100 kg
- Listed lifting speed
- 0–18 m/min
- Lifting height
- 5 m
- Rated power
- 450 W
- Listed supply
- AC 220 V
- Rated current
- 3.5 A
- Insulation class
- B
- Chain diameter
- 4.0 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 16.6 kg
- Control architecture
- Microprocessor control, load cell, limit and photoelectric sensing; slide, float and positioning modes subject to functional approval
REFERENCE 0321-25
Intelligent chain-hoist control configuration — 200 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 200 kg
- Listed lifting speed
- 0–9 m/min
- Lifting height
- 5 m
- Rated power
- 450 W
- Listed supply
- AC 220 V
- Rated current
- 3.5 A
- Insulation class
- B
- Chain diameter
- 4.0 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 16.6 kg
- Control architecture
- Microprocessor control, load cell, limit and photoelectric sensing; slide, float and positioning modes subject to functional approval
REFERENCE 0321-26
Intelligent chain-hoist control configuration — 250 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 250 kg
- Listed lifting speed
- 0–20 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 33.2 kg
- Control architecture
- Microprocessor control, load cell, limit and photoelectric sensing; slide, float and positioning modes subject to functional approval
REFERENCE 0321-27
Intelligent chain-hoist control configuration — 500 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 500 kg
- Listed lifting speed
- 0–10 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 33.2 kg
- Control architecture
- Microprocessor control, load cell, limit and photoelectric sensing; slide, float and positioning modes subject to functional approval
REFERENCE 0321-28
Intelligent chain-hoist control configuration — 100 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 100 kg
- Listed lifting speed
- 0–18 m/min
- Lifting height
- 5 m
- Rated power
- 450 W
- Listed supply
- AC 120 V
- Rated current
- 7 A
- Insulation class
- B
- Chain diameter
- 4.0 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 16.6 kg
- Control architecture
- Microprocessor control, load cell, limit and photoelectric sensing; slide, float and positioning modes subject to functional approval
REFERENCE 0321-29
Intelligent chain-hoist control configuration — 200 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 200 kg
- Listed lifting speed
- 0–9 m/min
- Lifting height
- 5 m
- Rated power
- 450 W
- Listed supply
- AC 120 V
- Rated current
- 7 A
- Insulation class
- B
- Chain diameter
- 4.0 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 16.6 kg
- Control architecture
- Microprocessor control, load cell, limit and photoelectric sensing; slide, float and positioning modes subject to functional approval
REFERENCE 0321-30
Intelligent chain-hoist control configuration — 250 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 250 kg
- Listed lifting speed
- 0–20 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 33.2 kg
- Control architecture
- Microprocessor control, load cell, limit and photoelectric sensing; slide, float and positioning modes subject to functional approval
REFERENCE 0321-31
Intelligent chain-hoist control configuration — 500 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 500 kg
- Listed lifting speed
- 0–10 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 33.2 kg
- Control architecture
- Microprocessor control, load cell, limit and photoelectric sensing; slide, float and positioning modes subject to functional approval
REFERENCE 0321-32
Intelligent chain-hoist control configuration — 250 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 250 kg
- Listed lifting speed
- 0–20 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 380 V
- Rated current
- 3 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 33.2 kg
- Control architecture
- Microprocessor control, load cell, limit and photoelectric sensing; slide, float and positioning modes subject to functional approval
REFERENCE 0321-33
Intelligent chain-hoist control configuration — 500 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Rated lifting load
- 500 kg
- Listed lifting speed
- 0–10 m/min
- Lifting height
- 5 m
- Rated power
- 1100 W
- Listed supply
- AC 380 V
- Rated current
- 3 A
- Insulation class
- B
- Chain diameter
- 6.3 mm
- Listed chain tensile strength
- ≥900 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 33.2 kg
- Control architecture
- Microprocessor control, load cell, limit and photoelectric sensing; slide, float and positioning modes subject to functional approval
REFERENCE 0321-34
Wire-rope lifting-device configuration — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 125 kg
- Listed lifting speed
- 45 m/min
- Lifting height
- 4.5 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 32 kg
REFERENCE 0321-35
Wire-rope lifting-device configuration — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Listed lifting speed
- 22 m/min
- Lifting height
- 4.5 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 32 kg
REFERENCE 0321-36
Wire-rope lifting-device configuration — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 500 kg
- Listed lifting speed
- 11 m/min
- Lifting height
- 2.2 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 32.7 kg
- Reeving configuration
- Double hook, as labeled for this construction
REFERENCE 0321-37
Wire-rope lifting-device configuration — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 125 kg
- Listed lifting speed
- 45 m/min
- Lifting height
- 4.5 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 32 kg
REFERENCE 0321-38
Wire-rope lifting-device configuration — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Listed lifting speed
- 22 m/min
- Lifting height
- 4.5 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 32 kg
REFERENCE 0321-39
Wire-rope lifting-device configuration — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 500 kg
- Listed lifting speed
- 11 m/min
- Lifting height
- 2.2 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 32.7 kg
- Reeving configuration
- Double hook, as labeled for this construction
REFERENCE 0321-40
Wire-rope lifting-device configuration
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Lifting height
- 4.5 m
- Listed supply
- AC 380 V
- Rated current
- 2.2 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 32 kg
REFERENCE 0321-41
Wire-rope lifting-device configuration
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Lifting height
- 2.2 m
- Listed supply
- AC 380 V
- Rated current
- 2.2 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 32.7 kg
- Reeving configuration
- Double hook, as labeled for this construction
REFERENCE 0321-42
In-line-slide wire-rope lifting device — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 125 kg
- Listed lifting speed
- 45 m/min
- Lifting height
- 4.5 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 34.7 kg
REFERENCE 0321-43
In-line-slide wire-rope lifting device — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Listed lifting speed
- 22 m/min
- Lifting height
- 4.5 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 34.7 kg
REFERENCE 0321-44
In-line-slide wire-rope lifting device — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 500 kg
- Listed lifting speed
- 11 m/min
- Lifting height
- 2.2 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 37.7 kg
- Reeving configuration
- Double hook, as labeled for this construction
REFERENCE 0321-45
In-line-slide wire-rope lifting device — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 125 kg
- Listed lifting speed
- 45 m/min
- Lifting height
- 4.5 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 34.7 kg
REFERENCE 0321-46
In-line-slide wire-rope lifting device — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Listed lifting speed
- 22 m/min
- Lifting height
- 4.5 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 34.7 kg
REFERENCE 0321-47
In-line-slide wire-rope lifting device — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 500 kg
- Listed lifting speed
- 11 m/min
- Lifting height
- 2.2 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 37.7 kg
- Reeving configuration
- Double hook, as labeled for this construction
REFERENCE 0321-48
In-line-slide wire-rope lifting device
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Lifting height
- 4.5 m
- Listed supply
- AC 380 V
- Rated current
- 2.2 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 34.7 kg
REFERENCE 0321-49
In-line-slide wire-rope lifting device
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Lifting height
- 2.2 m
- Listed supply
- AC 380 V
- Rated current
- 2.2 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 37.7 kg
- Reeving configuration
- Double hook, as labeled for this construction
REFERENCE 0321-50
Intelligent wire-rope lifting device — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 125 kg
- Listed lifting speed
- 45 m/min
- Lifting height
- 4.5 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 37.3 kg
- Control functions
- Float and manual modes, load-cell sensing, optical handle sensing and virtual travel limits; settings and function tests to approve
REFERENCE 0321-51
Intelligent wire-rope lifting device — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Listed lifting speed
- 22 m/min
- Lifting height
- 4.5 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 37.3 kg
- Control functions
- Float and manual modes, load-cell sensing, optical handle sensing and virtual travel limits; settings and function tests to approve
REFERENCE 0321-52
Intelligent wire-rope lifting device — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 500 kg
- Listed lifting speed
- 11 m/min
- Lifting height
- 2.2 m
- Rated power
- 1100 W
- Listed supply
- AC 220 V
- Rated current
- 7.5 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 40.3 kg
- Reeving configuration
- Double hook, as labeled for this construction
- Control functions
- Float and manual modes, load-cell sensing, optical handle sensing and virtual travel limits; settings and function tests to approve
REFERENCE 0321-53
Intelligent wire-rope lifting device — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 125 kg
- Listed lifting speed
- 45 m/min
- Lifting height
- 4.5 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 37.3 kg
- Control functions
- Float and manual modes, load-cell sensing, optical handle sensing and virtual travel limits; settings and function tests to approve
REFERENCE 0321-54
Intelligent wire-rope lifting device — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Listed lifting speed
- 22 m/min
- Lifting height
- 4.5 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 37.3 kg
- Control functions
- Float and manual modes, load-cell sensing, optical handle sensing and virtual travel limits; settings and function tests to approve
REFERENCE 0321-55
Intelligent wire-rope lifting device — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 500 kg
- Listed lifting speed
- 11 m/min
- Lifting height
- 2.2 m
- Rated power
- 1100 W
- Listed supply
- AC 120 V
- Rated current
- 15 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 40.3 kg
- Reeving configuration
- Double hook, as labeled for this construction
- Control functions
- Float and manual modes, load-cell sensing, optical handle sensing and virtual travel limits; settings and function tests to approve
REFERENCE 0321-56
Intelligent wire-rope lifting device
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Lifting height
- 4.5 m
- Listed supply
- AC 380 V
- Rated current
- 2.2 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 37.3 kg
- Control functions
- Float and manual modes, load-cell sensing, optical handle sensing and virtual travel limits; settings and function tests to approve
REFERENCE 0321-57
Intelligent wire-rope lifting device
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Lifting height
- 2.2 m
- Listed supply
- AC 380 V
- Rated current
- 2.2 A
- Insulation class
- B
- Wire-rope diameter
- 4.8 mm
- Listed wire tensile strength
- ≥1770 N/mm²
- Listed duty level
- M5
- Listed protection class
- IP54
- Working duty
- S3 50%–10 min
- Operating temperature
- 0–40°C
- Listed net weight
- 40.3 kg
- Control functions
- Float and manual modes, load-cell sensing, optical handle sensing and virtual travel limits; settings and function tests to approve
REFERENCE 0321-58
Mini electric wire-rope hoist — 50 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 50 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 180 W
- Lifting speed
- 8 m/min
- Lifting height
- 8 m
- Listed packing dimensions
- 47.5×33×31 cm
- Listed quantity per carton
- 4
- Listed G.W./N.W. (packing basis to confirm)
- 21/20 kg
- Drawing A
- 260 mm
- Drawing B
- 94 mm
- Drawing C
- 260 mm
- Drawing D
- 145 mm
- Drawing E
- 61 mm
- Drawing fastener reference F
- 4-M6
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-59
Mini electric wire-rope hoist — 100 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 100 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 180 W
- Lifting speed
- 4 m/min
- Lifting height
- 4 m
- Listed packing dimensions
- 47.5×33×31 cm
- Listed quantity per carton
- 4
- Listed G.W./N.W. (packing basis to confirm)
- 21/20 kg
- Drawing A
- 260 mm
- Drawing B
- 94 mm
- Drawing C
- 260 mm
- Drawing D
- 145 mm
- Drawing E
- 61 mm
- Drawing fastener reference F
- 4-M6
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-60
Mini electric wire-rope hoist — 100 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 100 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 450 W
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 21/20 kg
- Drawing A
- 325 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-61
Mini electric wire-rope hoist — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 200 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 450 W
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 21/20 kg
- Drawing A
- 325 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-62
Mini electric wire-rope hoist — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 125 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 500 W
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 21/20 kg
- Drawing A
- 325 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-63
Mini electric wire-rope hoist — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 500 W
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 21/20 kg
- Drawing A
- 325 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-64
Mini electric wire-rope hoist — 150 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 150 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 550 W
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 22/21 kg
- Drawing A
- 336 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-65
Mini electric wire-rope hoist — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 300 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 550 W
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 22/21 kg
- Drawing A
- 336 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-66
Mini electric wire-rope hoist — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 200 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 750 W
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 51.8×39×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 33/31 kg
- Drawing A
- 372 mm
- Drawing B
- 145 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-67
Mini electric wire-rope hoist — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 400 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 750 W
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 51.8×39×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 33/31 kg
- Drawing A
- 372 mm
- Drawing B
- 145 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-68
Mini electric wire-rope hoist — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 900 W
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 51.8×39×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 34/32 kg
- Drawing A
- 372 mm
- Drawing B
- 145 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-69
Mini electric wire-rope hoist — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 500 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 900 W
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 51.8×39×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 34/32 kg
- Drawing A
- 372 mm
- Drawing B
- 145 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-70
Mini electric wire-rope hoist — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 300 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 1050 W
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 52×41×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 36/34 kg
- Drawing A
- 393 mm
- Drawing B
- 146 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-71
Mini electric wire-rope hoist — 600 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 600 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 1050 W
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 52×41×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 36/34 kg
- Drawing A
- 393 mm
- Drawing B
- 146 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-72
Mini electric wire-rope hoist — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 400 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 1350 W
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 52×44×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 41/39.5 kg
- Drawing A
- 418 mm
- Drawing B
- 147 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-73
Mini electric wire-rope hoist — 800 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 800 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 1350 W
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 52×44×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 41/39.5 kg
- Drawing A
- 418 mm
- Drawing B
- 147 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-74
Mini electric wire-rope hoist — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 500 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 1600 W
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 56.5×24.5×32.5 cm
- Listed quantity per carton
- 1
- Listed G.W./N.W. (packing basis to confirm)
- 34/32 kg
- Drawing A
- 481 mm
- Drawing B
- 170 mm
- Drawing C
- 555 mm
- Drawing D
- 250 mm
- Drawing E
- 110 mm
- Drawing fastener reference F
- 4-M12
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-75
Mini electric wire-rope hoist — 999 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 999 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 1600 W
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 56.5×24.5×32.5 cm
- Listed quantity per carton
- 1
- Listed G.W./N.W. (packing basis to confirm)
- 34/32 kg
- Drawing A
- 481 mm
- Drawing B
- 170 mm
- Drawing C
- 555 mm
- Drawing D
- 250 mm
- Drawing E
- 110 mm
- Drawing fastener reference F
- 4-M12
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-76
Mini electric wire-rope hoist — 50 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 50 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 180 W
- Lifting speed
- 10 m/min
- Lifting height
- 8 m
- Listed packing dimensions
- 47.5×33×31 cm
- Listed quantity per carton
- 4
- Listed G.W./N.W. (packing basis to confirm)
- 21/20 kg
- Drawing A
- 260 mm
- Drawing B
- 94 mm
- Drawing C
- 260 mm
- Drawing D
- 145 mm
- Drawing E
- 61 mm
- Drawing fastener reference F
- 4-M6
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-77
Mini electric wire-rope hoist — 100 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 100 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 180 W
- Lifting speed
- 5 m/min
- Lifting height
- 4 m
- Listed packing dimensions
- 47.5×33×31 cm
- Listed quantity per carton
- 4
- Listed G.W./N.W. (packing basis to confirm)
- 21/20 kg
- Drawing A
- 260 mm
- Drawing B
- 94 mm
- Drawing C
- 260 mm
- Drawing D
- 145 mm
- Drawing E
- 61 mm
- Drawing fastener reference F
- 4-M6
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-78
Mini electric wire-rope hoist — 100 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 100 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 450 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 21/20 kg
- Drawing A
- 325 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-79
Mini electric wire-rope hoist — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 200 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 450 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 21/20 kg
- Drawing A
- 325 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-80
Mini electric wire-rope hoist — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 125 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 500 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 21/20 kg
- Drawing A
- 325 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-81
Mini electric wire-rope hoist — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 500 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 21/20 kg
- Drawing A
- 325 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-82
Mini electric wire-rope hoist — 150 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 150 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 550 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 22/21 kg
- Drawing A
- 336 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-83
Mini electric wire-rope hoist — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 300 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 550 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 22/21 kg
- Drawing A
- 336 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-84
Mini electric wire-rope hoist — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 200 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 750 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 51.8×39×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 33/31 kg
- Drawing A
- 372 mm
- Drawing B
- 145 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-85
Mini electric wire-rope hoist — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 400 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 750 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 51.8×39×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 33/31 kg
- Drawing A
- 372 mm
- Drawing B
- 145 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-86
Mini electric wire-rope hoist — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 900 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 51.8×39×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 34/32 kg
- Drawing A
- 372 mm
- Drawing B
- 145 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-87
Mini electric wire-rope hoist — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 500 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 900 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 51.8×39×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 34/32 kg
- Drawing A
- 372 mm
- Drawing B
- 145 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-88
Mini electric wire-rope hoist — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 300 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 1050 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 52×41×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 36/34 kg
- Drawing A
- 393 mm
- Drawing B
- 146 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-89
Mini electric wire-rope hoist — 600 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 600 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 1050 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 52×41×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 36/34 kg
- Drawing A
- 393 mm
- Drawing B
- 146 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-90
Mini electric wire-rope hoist — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 400 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 1350 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 52×44×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 41/39.5 kg
- Drawing A
- 418 mm
- Drawing B
- 147 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-91
Mini electric wire-rope hoist — 800 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 800 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 1350 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 52×44×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 41/39.5 kg
- Drawing A
- 418 mm
- Drawing B
- 147 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-92
Mini electric wire-rope hoist — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 500 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 1600 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 56.5×24.5×32.5 cm
- Listed quantity per carton
- 1
- Listed G.W./N.W. (packing basis to confirm)
- 34/32 kg
- Drawing A
- 481 mm
- Drawing B
- 170 mm
- Drawing C
- 555 mm
- Drawing D
- 250 mm
- Drawing E
- 110 mm
- Drawing fastener reference F
- 4-M12
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-93
Mini electric wire-rope hoist — 999 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 999 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 1600 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 56.5×24.5×32.5 cm
- Listed quantity per carton
- 1
- Listed G.W./N.W. (packing basis to confirm)
- 34/32 kg
- Drawing A
- 481 mm
- Drawing B
- 170 mm
- Drawing C
- 555 mm
- Drawing D
- 250 mm
- Drawing E
- 110 mm
- Drawing fastener reference F
- 4-M12
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-94
Mini electric wire-rope hoist — 600 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 600 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 1800 W
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 56.5×24.5×32.6 cm
- Listed quantity per carton
- 1
- Listed G.W./N.W. (packing basis to confirm)
- 35/33 kg
- Drawing A
- 498 mm
- Drawing B
- 170 mm
- Drawing C
- 555 mm
- Drawing D
- 250 mm
- Drawing E
- 110 mm
- Drawing fastener reference F
- 4-M12
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-95
Mini electric wire-rope hoist — 1200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 1200 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 1800 W
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 56.5×24.5×32.6 cm
- Listed quantity per carton
- 1
- Listed G.W./N.W. (packing basis to confirm)
- 35/33 kg
- Drawing A
- 498 mm
- Drawing B
- 170 mm
- Drawing C
- 555 mm
- Drawing D
- 250 mm
- Drawing E
- 110 mm
- Drawing fastener reference F
- 4-M12
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-96
Mini electric wire-rope hoist — 50 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 50 kg
- Reeving configuration
- Single hook
- Rated supply
- 110–127 V
- Input power
- 220 W
- Lifting speed
- 10 m/min
- Lifting height
- 8 m
- Listed packing dimensions
- 47.5×33×31 cm
- Listed quantity per carton
- 4
- Listed G.W./N.W. (packing basis to confirm)
- 21/20 kg
- Drawing A
- 260 mm
- Drawing B
- 94 mm
- Drawing C
- 260 mm
- Drawing D
- 145 mm
- Drawing E
- 61 mm
- Drawing fastener reference F
- 4-M6
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-97
Mini electric wire-rope hoist — 100 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 100 kg
- Reeving configuration
- Double hook
- Rated supply
- 110–127 V
- Input power
- 220 W
- Lifting speed
- 5 m/min
- Lifting height
- 4 m
- Listed packing dimensions
- 47.5×33×31 cm
- Listed quantity per carton
- 4
- Listed G.W./N.W. (packing basis to confirm)
- 21/20 kg
- Drawing A
- 260 mm
- Drawing B
- 94 mm
- Drawing C
- 260 mm
- Drawing D
- 145 mm
- Drawing E
- 61 mm
- Drawing fastener reference F
- 4-M6
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-98
Mini electric wire-rope hoist — 100 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 100 kg
- Reeving configuration
- Single hook
- Rated supply
- 110–127 V
- Input power
- 460 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 24/22 kg
- Drawing A
- 325 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-99
Mini electric wire-rope hoist — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 200 kg
- Reeving configuration
- Double hook
- Rated supply
- 110–127 V
- Input power
- 460 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 24/22 kg
- Drawing A
- 325 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-100
Mini electric wire-rope hoist — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 125 kg
- Reeving configuration
- Single hook
- Rated supply
- 110–127 V
- Input power
- 560 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 25/23 kg
- Drawing A
- 325 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-101
Mini electric wire-rope hoist — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Reeving configuration
- Double hook
- Rated supply
- 110–127 V
- Input power
- 560 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 25/23 kg
- Drawing A
- 325 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-102
Mini electric wire-rope hoist — 150 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 150 kg
- Reeving configuration
- Single hook
- Rated supply
- 110–127 V
- Input power
- 660 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 26/24 kg
- Drawing A
- 336 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-103
Mini electric wire-rope hoist — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 300 kg
- Reeving configuration
- Double hook
- Rated supply
- 110–127 V
- Input power
- 660 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 47×36.5×16 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 26/24 kg
- Drawing A
- 336 mm
- Drawing B
- 131 mm
- Drawing C
- 332 mm
- Drawing D
- 190 mm
- Drawing E
- 90 mm
- Drawing fastener reference F
- 4-M8
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-104
Mini electric wire-rope hoist — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 200 kg
- Reeving configuration
- Single hook
- Rated supply
- 110–127 V
- Input power
- 850 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 51.8×39×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 35/33 kg
- Drawing A
- 372 mm
- Drawing B
- 145 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-105
Mini electric wire-rope hoist — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 400 kg
- Reeving configuration
- Double hook
- Rated supply
- 110–127 V
- Input power
- 850 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 51.8×39×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 35/33 kg
- Drawing A
- 372 mm
- Drawing B
- 145 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-106
Mini electric wire-rope hoist — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Reeving configuration
- Single hook
- Rated supply
- 110–127 V
- Input power
- 1000 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 51.8×39×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 36/34 kg
- Drawing A
- 372 mm
- Drawing B
- 145 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-107
Mini electric wire-rope hoist — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 500 kg
- Reeving configuration
- Double hook
- Rated supply
- 110–127 V
- Input power
- 1000 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 51.8×39×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 36/34 kg
- Drawing A
- 372 mm
- Drawing B
- 145 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-108
Mini electric wire-rope hoist — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 300 kg
- Reeving configuration
- Single hook
- Rated supply
- 110–127 V
- Input power
- 1180 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 52×41×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 37/35 kg
- Drawing A
- 393 mm
- Drawing B
- 146 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-109
Mini electric wire-rope hoist — 600 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 600 kg
- Reeving configuration
- Double hook
- Rated supply
- 110–127 V
- Input power
- 1180 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 52×41×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 37/35 kg
- Drawing A
- 393 mm
- Drawing B
- 146 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-110
Mini electric wire-rope hoist — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 400 kg
- Reeving configuration
- Single hook
- Rated supply
- 110–127 V
- Input power
- 1350 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 52×44×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 41/39 kg
- Drawing A
- 418 mm
- Drawing B
- 147 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-111
Mini electric wire-rope hoist — 800 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 800 kg
- Reeving configuration
- Double hook
- Rated supply
- 110–127 V
- Input power
- 1350 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 52×44×17 cm
- Listed quantity per carton
- 2
- Listed G.W./N.W. (packing basis to confirm)
- 41/39 kg
- Drawing A
- 418 mm
- Drawing B
- 147 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-112
Mini electric wire-rope hoist — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 500 kg
- Reeving configuration
- Single hook
- Rated supply
- 110–127 V
- Input power
- 1500 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed packing dimensions
- 56.5×24.5×32.5 cm
- Listed quantity per carton
- 1
- Drawing A
- 481 mm
- Drawing B
- 170 mm
- Drawing C
- 555 mm
- Drawing D
- 250 mm
- Drawing E
- 110 mm
- Drawing fastener reference F
- 4-M12
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-113
Mini electric wire-rope hoist — 999 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 999 kg
- Reeving configuration
- Double hook
- Rated supply
- 110–127 V
- Input power
- 1500 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed packing dimensions
- 56.5×24.5×32.5 cm
- Listed quantity per carton
- 1
- Drawing A
- 481 mm
- Drawing B
- 170 mm
- Drawing C
- 555 mm
- Drawing D
- 250 mm
- Drawing E
- 110 mm
- Drawing fastener reference F
- 4-M12
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-114
Single-hook electric chain hoist — 150 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Reeving configuration
- Single hook
- Listed supply pair
- 120/230 V
- Listed input-power pair
- 250/205 W
- Rated lifting load
- 150 kg
- Listed lifting-speed pair
- 3/2.3 m/min
- Lifting height
- 3 m
- Chain diameter
- 4 mm
- Listed quantity
- 1 piece
- Packing dimensions
- 31.4×30×24.4 cm
- Listed net weight
- 7.9 kg
REFERENCE 0321-115
Single-hook electric chain hoist — 300 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Reeving configuration
- Single hook
- Listed supply pair
- 120/230 V
- Listed input-power pair
- 420/410 W
- Rated lifting load
- 300 kg
- Listed lifting-speed pair
- 4/3 m/min
- Lifting height
- 3 m
- Chain diameter
- 5 mm
- Listed quantity
- 1 piece
- Packing dimensions
- 36.6×36.6×28.3 cm
- Listed net weight
- 14.3 kg
REFERENCE 0321-116
Single-hook electric chain hoist — 500 kg
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Reeving configuration
- Single hook
- Listed supply pair
- 120/230 V
- Listed input-power pair
- 650/540 W
- Rated lifting load
- 500 kg
- Listed lifting-speed pair
- 4/2.8 m/min
- Lifting height
- 3 m
- Chain diameter
- 6.3 mm
- Listed quantity
- 1 piece
- Packing dimensions
- 47.5×36.5×32 cm
- Listed net weight
- 18.5 kg
REFERENCE 0321-117
Single-hook electric chain hoist
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Reeving configuration
- Single hook
- Listed supply pair
- 120/230 V
- Listed input-power pair
- 1400/1100 W
- Listed lifting-speed pair
- 3/3.2 m/min
- Lifting height
- 3 m
- Chain diameter
- 7.1 mm
- Listed quantity
- 1 piece
- Packing dimensions
- 48.5×48.5×32 cm
- Listed net weight
- 32.5 kg
REFERENCE 0321-118
Marine anchor-windlass configuration — 180 /400 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 600 W
- Supply
- 12 V
- Listed current draw
- 20 A
- Listed chain-drop speed
- 35 /115 m/min /ft/min as listed
- Gypsy/line alternatives
- 6 mm chain; separate 7 mm /1/4 inch and 8 mm /5/16 inch chain/rope options
- Maximum working-load reference
- 180 /400 kg /lb as listed
- Maximum power-pull reference
- 540 /1200 kg /lb as listed
- Listed equipment mass
- 13 /28.7 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch for alternative 2;14 mm /9/16 inch for alternative 3
- Labelled drawing dimensions (inches, source order)
- 7.91 /4.72 /10.1 /5.47 /5.55
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
REFERENCE 0321-119
Marine anchor-windlass configuration — 250 /550 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 900 W
- Supply
- 12 V
- Listed current draw
- 35 A
- Listed chain-drop speed
- 35 /115 m/min /ft/min as listed
- Gypsy/line alternatives
- 6 mm chain; separate 7 mm /1/4 inch and 8 mm /5/16 inch chain/rope options
- Maximum working-load reference
- 250 /550 kg /lb as listed
- Maximum power-pull reference
- 750 /1650 kg /lb as listed
- Listed equipment mass
- 13 /28.7 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch for alternative 2;14 mm /9/16 inch for alternative 3
- Labelled drawing dimensions (inches, source order)
- 7.91 /4.72 /10.1 /5.47 /5.55
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
REFERENCE 0321-120
Marine windlass reference — 150 /330 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 600 W
- Supply
- 12 V
- Listed current draw
- 33 A
- Listed chain-drop speed
- 26 /85 m/min /ft/min as listed
- Gypsy/line alternatives
- 6 mm chain; separate 7 mm /1/4 inch chain/rope option
- Maximum working-load reference
- 150 /330 kg /lb as listed
- Maximum power-pull reference
- 450 /990 kg /lb as listed
- Listed equipment mass
- 9.1 /20 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch where explicitly listed
- Labelled drawing dimensions (inches, source order)
- 7.05 /3.3 /4.1 /9.3
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-121
Marine windlass reference — 220 /484 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 900 W
- Supply
- 12 V
- Listed current draw
- 55 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 6 mm chain; separate 7 mm /1/4 inch chain/rope option
- Maximum working-load reference
- 220 /484 kg /lb as listed
- Maximum power-pull reference
- 660 /1452 kg /lb as listed
- Listed equipment mass
- 9.1 /20 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch where explicitly listed
- Labelled drawing dimensions (inches, source order)
- 7.05 /3.3 /4.1 /9.3
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-122
Marine windlass with separate drum — 150 /330 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 600 W
- Supply
- 12 V
- Listed current draw
- 33 A
- Listed chain-drop speed
- 26 /85 m/min /ft/min as listed
- Gypsy/line alternatives
- 6 mm chain; separate 7 mm /1/4 inch chain/rope option
- Maximum working-load reference
- 150 /330 kg /lb as listed
- Maximum power-pull reference
- 450 /990 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch where explicitly listed
- Labelled drawing dimensions (inches, source order)
- 7.05 /4.92 /4.1 /9.3
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-123
Marine windlass with separate drum — 220 /484 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 900 W
- Supply
- 12 V
- Listed current draw
- 55 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 6 mm chain; separate 7 mm /1/4 inch chain/rope option
- Maximum working-load reference
- 220 /484 kg /lb as listed
- Maximum power-pull reference
- 660 /1452 kg /lb as listed
- Listed equipment mass
- 10.1 /22.3 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch where explicitly listed
- Labelled drawing dimensions (inches, source order)
- 7.05 /4.92 /4.1 /9.3
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-124
Marine windlass reference — 150 /330 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 600 W
- Supply
- 12 V
- Listed current draw
- 33 A
- Listed chain-drop speed
- 26 /85 m/min /ft/min as listed
- Gypsy/line alternatives
- 6 mm chain; separate 7 mm /1/4 inch chain/rope option
- Maximum working-load reference
- 150 /330 kg /lb as listed
- Maximum power-pull reference
- 450 /990 kg /lb as listed
- Listed equipment mass
- 8.3 /18.3 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 7.32 /3.3 /4.1 /9.3
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-125
Marine windlass reference — 220 /484 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 900 W
- Supply
- 12 V
- Listed current draw
- 55 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 6 mm chain; separate 7 mm /1/4 inch chain/rope option
- Maximum working-load reference
- 220 /484 kg /lb as listed
- Maximum power-pull reference
- 660 /1452 kg /lb as listed
- Listed equipment mass
- 8.3 /18.3 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 7.32 /3.3 /4.1 /9.3
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-126
Marine windlass with separate drum — 150 /330 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 600 W
- Supply
- 12 V
- Listed current draw
- 33 A
- Listed chain-drop speed
- 26 /85 m/min /ft/min as listed
- Gypsy/line alternatives
- 6 mm chain; separate 7 mm /1/4 inch chain/rope option
- Maximum working-load reference
- 150 /330 kg /lb as listed
- Maximum power-pull reference
- 450 /990 kg /lb as listed
- Listed equipment mass
- 9.2 /20.3 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch where explicitly listed
- Labelled drawing dimensions (inches, source order)
- 7.32 /4.92 /4.1 /9.3
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-127
Marine windlass with separate drum — 220 /484 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 900 W
- Supply
- 12 V
- Listed current draw
- 55 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 6 mm chain; separate 7 mm /1/4 inch chain/rope option
- Maximum working-load reference
- 220 /484 kg /lb as listed
- Maximum power-pull reference
- 660 /1452 kg /lb as listed
- Listed equipment mass
- 9.2 /20.3 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch where explicitly listed
- Labelled drawing dimensions (inches, source order)
- 7.32 /4.92 /4.1 /9.3
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-128
Marine windlass reference — 250 /550 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1000 W
- Supply
- 12 V
- Listed current draw
- 55 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 7 mm /1/4 inch or 8 mm /5/16 inch chain/rope alternatives
- Maximum working-load reference
- 250 /550 kg /lb as listed
- Maximum power-pull reference
- 750 /1650 kg /lb as listed
- Listed equipment mass
- 19 /42 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch or 14 mm /9/16 inch, respective alternatives
- Labelled drawing dimensions (inches, source order)
- 8.78 /4.1 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-129
Marine windlass with separate drum — 250 /550 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1000 W
- Supply
- 12 V
- Listed current draw
- 55 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 7 mm /1/4 inch or 8 mm /5/16 inch chain/rope alternatives
- Maximum working-load reference
- 250 /550 kg /lb as listed
- Maximum power-pull reference
- 750 /1650 kg /lb as listed
- Listed equipment mass
- 20.1 /44.4 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch or 14 mm /9/16 inch, respective alternatives
- Labelled drawing dimensions (inches, source order)
- 8.78 /5.55 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-130
Marine anchor-windlass configuration — 400 /880 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1200 W
- Supply
- 12 V
- Listed current draw
- 85 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 8 mm /5/16 inch or 10 mm /3/8 inch chain/rope alternatives
- Maximum working-load reference
- 400 /880 kg /lb as listed
- Maximum power-pull reference
- 1100 /2420 kg /lb as listed
- Listed equipment mass
- 20.3 /44.8 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 10 /4.04 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-131
Marine anchor-windlass configuration — 485 /1067 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1500 W
- Supply
- 12 V
- Listed current draw
- 115 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 8 mm /5/16 inch or 10 mm /3/8 inch chain/rope alternatives
- Maximum working-load reference
- 485 /1067 kg /lb as listed
- Maximum power-pull reference
- 1200 /2640 kg /lb as listed
- Listed equipment mass
- 20.3 /44.8 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 10 /4.04 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-132
Marine anchor-windlass configuration — 485 /1067 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1500 W
- Supply
- 24 V
- Listed current draw
- 65 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 8 mm /5/16 inch or 10 mm /3/8 inch chain/rope alternatives
- Maximum working-load reference
- 485 /1067 kg /lb as listed
- Maximum power-pull reference
- 1200 /2640 kg /lb as listed
- Listed equipment mass
- 20.3 /44.8 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 10 /4.04 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-133
Marine anchor-windlass configuration — 700 /1540 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1800 W
- Supply
- 12 V
- Listed current draw
- 130 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 8 mm /5/16 inch or 10 mm /3/8 inch chain/rope alternatives
- Maximum working-load reference
- 700 /1540 kg /lb as listed
- Maximum power-pull reference
- 2100 /4620 kg /lb as listed
- Listed equipment mass
- 21.1 /46.5 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 10 /4.04 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-134
Marine trap-line hauling configuration — 90 /198 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 900 W
- Supply
- 12 V
- Listed current draw
- 120 A
- Maximum working-load reference
- 90 /198 kg /lb as listed
- Listed equipment mass
- 13.7 /30 kg /lb as listed
- Rope alternatives
- 4–10 mm (4/25–3/8 inch as listed)
- Application direction
- Crab and prawn trap-line handling; actual line, load and installation require review
- Line-speed selection
- Request the actual rope-hauling speed, load and duty test for the selected construction.
REFERENCE 0321-135
Windlass solenoid control
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Control supply
- 12 V
REFERENCE 0321-136
Windlass solenoid control
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Control supply
- 24 V
REFERENCE 0321-137
Reversing solenoid
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Control supply
- 12 V
REFERENCE 0321-138
Marine-windlass circuit-breaker reference
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Source supply classification
- 12 V
- Listed current rating
- 60 A
REFERENCE 0321-139
Marine-windlass circuit-breaker reference
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Source supply classification
- 12 V
- Listed current rating
- 80 A
REFERENCE 0321-140
Marine-windlass circuit-breaker reference
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Source supply classification
- 12 V
- Listed current rating
- 100 A
REFERENCE 0321-141
Marine-windlass circuit-breaker reference
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Source supply classification
- 12 V
- Listed current rating
- 135 A
REFERENCE 0321-142
Marine-windlass circuit-breaker reference
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Source supply classification
- 12 V
- Listed current rating
- 175 A
REFERENCE 0321-143
Marine-windlass circuit-breaker reference
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Source supply classification
- 24 V
- Listed current rating
- 60 A
REFERENCE 0321-144
Marine-windlass circuit-breaker reference
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Source supply classification
- 24 V
- Listed current rating
- 80 A
REFERENCE 0321-145
Marine-windlass circuit-breaker reference
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Source supply classification
- 24 V
- Listed current rating
- 100 A
REFERENCE 0321-146
Marine-windlass circuit-breaker reference
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Source supply classification
- 24 V
- Listed current rating
- 135 A
REFERENCE 0321-147
Marine-windlass circuit-breaker reference
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Source supply classification
- 24 V
- Listed current rating
- 175 A
REFERENCE 0321-148
Up/down rocker-switch panel
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Drawing dimensions A/B/C
- 70 /45 /25 mm
- Control direction
- Up/down
REFERENCE 0321-149
Switch panel with safety switch
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Drawing dimensions A/B/C
- 90 /57 /20 mm
- Switch feature
- Separate safety-switch arrangement; exact protection and installation to approve
REFERENCE 0321-150
Paired foot-switch controls
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Drawing dimensions B/C
- 90 /25 mm
- Listed colour choices
- White /black
REFERENCE 0321-151
Four-channel radio receiver
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Drawing dimensions A/B/C
- 120 /85 /30 mm
- Channels
- 4
- Listed control function
- Autodown; exact interlocks to confirm
REFERENCE 0321-152
Four-channel radio transmitter
Match this control component to the motor supply, current, direction logic and wiring. Confirm terminal details, protection requirements, component dimensions and the complete control-system compatibility.
- Drawing dimensions A/B/C
- 75 /60 /30 mm
- Channels
- 4
- Listed control function
- Autodown; receiver compatibility to confirm
REFERENCE 0321-153
Suspended electric wire-rope hoist — 100 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 100 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 450 W
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 14/13 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-154
Suspended electric wire-rope hoist — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 200 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 450 W
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 14/13 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-155
Suspended electric wire-rope hoist — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 125 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 500 W
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 14.5/13.5 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-156
Suspended electric wire-rope hoist — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 500 W
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 14.5/13.5 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-157
Suspended electric wire-rope hoist — 150 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 150 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 550 W
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 15/14 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-158
Suspended electric wire-rope hoist — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 300 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 550 W
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 15/14 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-159
Suspended electric wire-rope hoist — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 200 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 750 W
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×36.5×30.5 cm
- Listed G.W./N.W.
- 19/18 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-160
Suspended electric wire-rope hoist — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 400 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 750 W
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×36.5×30.5 cm
- Listed G.W./N.W.
- 19/18 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-161
Suspended electric wire-rope hoist — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 900 W
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×36.5×30.5 cm
- Listed G.W./N.W.
- 20/19 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-162
Suspended electric wire-rope hoist — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 500 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 900 W
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×36.5×30.5 cm
- Listed G.W./N.W.
- 20/19 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-163
Suspended electric wire-rope hoist — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 300 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 1050 W
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×36.5×30.5 cm
- Listed G.W./N.W.
- 21/20 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-164
Suspended electric wire-rope hoist — 600 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 600 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 1050 W
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×36.5×30.5 cm
- Listed G.W./N.W.
- 21/20 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-165
Suspended electric wire-rope hoist — 100 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 100 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 450 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 14/13 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-166
Suspended electric wire-rope hoist — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 200 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 450 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 14/13 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-167
Suspended electric wire-rope hoist — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 125 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 500 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 14.5/13.5 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-168
Suspended electric wire-rope hoist — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 500 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 14.5/13.5 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-169
Suspended electric wire-rope hoist — 150 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 150 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 550 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 15/14 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-170
Suspended electric wire-rope hoist — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 300 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 550 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 15/14 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-171
Suspended electric wire-rope hoist — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 200 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 750 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 48.5×36.5×30.5 cm
- Listed G.W./N.W.
- 19/18 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-172
Suspended electric wire-rope hoist — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 400 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 750 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 48.5×36.5×30.5 cm
- Listed G.W./N.W.
- 19/18 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-173
Suspended electric wire-rope hoist — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 900 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 48.5×36.5×30.5 cm
- Listed G.W./N.W.
- 20/19 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-174
Suspended electric wire-rope hoist — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 500 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 900 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 48.5×36.5×30.5 cm
- Listed G.W./N.W.
- 20/19 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-175
Suspended electric wire-rope hoist — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 300 kg
- Reeving configuration
- Single hook
- Rated supply
- 220–240 V
- Input power
- 1050 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 48.5×36.5×30.5 cm
- Listed G.W./N.W.
- 21/20 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-176
Suspended electric wire-rope hoist — 600 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 600 kg
- Reeving configuration
- Double hook
- Rated supply
- 220–240 V
- Input power
- 1050 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 48.5×36.5×30.5 cm
- Listed G.W./N.W.
- 21/20 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-177
Suspended electric wire-rope hoist — 100 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 100 kg
- Reeving configuration
- Single hook
- Rated supply
- 110–127 V
- Input power
- 460 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 14/13 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-178
Suspended electric wire-rope hoist — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 200 kg
- Reeving configuration
- Double hook
- Rated supply
- 110–127 V
- Input power
- 460 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 14/13 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-179
Suspended electric wire-rope hoist — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 125 kg
- Reeving configuration
- Single hook
- Rated supply
- 110–127 V
- Input power
- 560 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 14.5/13.5 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-180
Suspended electric wire-rope hoist — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Reeving configuration
- Double hook
- Rated supply
- 110–127 V
- Input power
- 560 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 14.5/13.5 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-181
Suspended electric wire-rope hoist — 150 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 150 kg
- Reeving configuration
- Single hook
- Rated supply
- 110–127 V
- Input power
- 660 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 15/14 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-182
Suspended electric wire-rope hoist — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 300 kg
- Reeving configuration
- Double hook
- Rated supply
- 110–127 V
- Input power
- 660 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 43.5×30×29.5 cm
- Listed G.W./N.W.
- 15/14 kg
- Drawing A/B/C/D
- 144 / 233.5 / 412 / 750 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-183
Suspended electric wire-rope hoist — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 200 kg
- Reeving configuration
- Single hook
- Rated supply
- 110–127 V
- Input power
- 850 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 48.5×36.5×30.5 cm
- Listed G.W./N.W.
- 19/18 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-184
Suspended electric wire-rope hoist — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 400 kg
- Reeving configuration
- Double hook
- Rated supply
- 110–127 V
- Input power
- 850 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 48.5×36.5×30.5 cm
- Listed G.W./N.W.
- 19/18 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-185
Suspended electric wire-rope hoist — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 250 kg
- Reeving configuration
- Single hook
- Rated supply
- 110–127 V
- Input power
- 1000 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 48.5×36.5×30.5 cm
- Listed G.W./N.W.
- 20/19 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-186
Suspended electric wire-rope hoist — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 500 kg
- Reeving configuration
- Double hook
- Rated supply
- 110–127 V
- Input power
- 1000 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 48.5×36.5×30.5 cm
- Listed G.W./N.W.
- 20/19 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-187
Suspended electric wire-rope hoist — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 300 kg
- Reeving configuration
- Single hook
- Rated supply
- 110–127 V
- Input power
- 1180 W
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Listed quantity per carton
- 1
- Packing dimensions
- 48.5×36.5×30.5 cm
- Listed G.W./N.W.
- 21/20 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-188
Suspended electric wire-rope hoist — 600 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Rated lifting load
- 600 kg
- Reeving configuration
- Double hook
- Rated supply
- 110–127 V
- Input power
- 1180 W
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Listed quantity per carton
- 1
- Packing dimensions
- 48.5×36.5×30.5 cm
- Listed G.W./N.W.
- 21/20 kg
- Drawing A/B/C/D
- 154 / 270 / 453 / 760 mm
- Wireless controller
- Optional; exact supplied controls to confirm
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Article protection-class reference
- IP40; exact configuration and environment to approve
REFERENCE 0321-189
Long-travel single-hook wire-rope hoist — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Reeving configuration
- Single hook
- Rated supply
- 230 V ~ 50 Hz
- Input power
- 1300 W
- Rated lifting load
- 250 kg
- Lifting speed
- 15 m/min
- Lifting height
- 60 m
- Rope diameter
- 4.5 mm
- Quantity per carton
- 1
- Packing dimensions
- 50×29×36.5 cm
- Listed net weight
- 32 kg
- Travel limit arrangement
- Upper limit device
REFERENCE 0321-190
DC electric wire-rope hoist — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Reeving configuration
- Single hook
- Listed supply options
- 12/24 V DC
- Input power
- 400 W
- Rated lifting load
- 200 kg
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Rope diameter
- 3.8 mm
- Quantity per carton
- 2
- Packing dimensions
- 50×40×17 cm
- Listed net weight
- 22 kg
- Travel limit arrangement
- Upper limit device
- DC connection feature
- Battery-polarity protection arrangement; wiring and function to approve
REFERENCE 0321-191
DC electric wire-rope hoist — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Reeving configuration
- Double hook
- Listed supply options
- 12/24 V DC
- Input power
- 400 W
- Rated lifting load
- 400 kg
- Lifting speed
- 2 m/min
- Lifting height
- 3 m
- Rope diameter
- 3.8 mm
- Quantity per carton
- 2
- Packing dimensions
- 50×40×17 cm
- Listed net weight
- 22 kg
- Travel limit arrangement
- Upper limit device
- DC connection feature
- Battery-polarity protection arrangement; wiring and function to approve
REFERENCE 0321-192
Electric beam trolley — 200 W
Compare beam flange, curve radius, suspension interface, travel controls and permitted load. Obtain the actual beam and installation drawing before selecting the trolley.
- Rated loading weight
- 999 kg
- Listed test loading weight
- 1250 kg
- Rated supply
- 230 V / 50 Hz
- Input power
- 200 W
- Moving speed
- 16 m/min
- Assembling height
- 3 m
- Minimum curved-track radius
- 1 m
- Recommended steel-beam label
- 10–22
- Track width
- 68–110 mm
- Listed net weight
- 15 kg
- Packing dimensions
- 36.5×32.5×27 cm
REFERENCE 0321-193
Electric beam trolley with control options
Compare beam flange, curve radius, suspension interface, travel controls and permitted load. Obtain the actual beam and installation drawing before selecting the trolley.
- Listed input-power pair
- 180/220 W
- Listed moving-speed pair
- 15/16.4 m/min
- Assembling height
- 3 m
- Minimum curved-track radius
- 1 m
- Drawing A/B/C/D/F
- 301 / 178 / 350 / 253 / 5 mm
- Recommended steel-beam label
- 10–22
- Track width
- 68–110 mm
- Listed net weight
- 14.5 kg
- Packing dimensions
- 35.5×30.5×21 cm
- Control directions
- Wireless or four-way wired controller optional; exact article to confirm
- Electrical selection
- Confirm the current selected voltage, frequency, input power and travel speed as one motor configuration.
REFERENCE 0321-194
Rotary hoist support frame — 600 kg
Review reach and hanging load as a matched condition. Check the mounting structure, fixing method, hoist interface and movement envelope against the installation drawing.
- Rated hanging load
- 600 kg
- Rated arm length
- 750 mm
- Listed quantity per carton
- 4
- Packing dimensions
- 86×19×21 cm
- Listed G.W./N.W.
- 19/18 kg
- Mounting drawing labels (units to confirm)
- Ø48; 380
REFERENCE 0321-195
Extending hoist support frame — 300 kg
Review reach and hanging load as a matched condition. Check the mounting structure, fixing method, hoist interface and movement envelope against the installation drawing.
- Rated hanging load
- 300 kg
- Rated arm length
- 1100 mm
- Listed quantity per carton
- 4
- Packing dimensions
- 86×19×21 cm
- Listed G.W./N.W.
- 27.2/25.2 kg
REFERENCE 0321-196
Extending hoist support-frame diagram configuration
Review reach and hanging load as a matched condition. Check the mounting structure, fixing method, hoist interface and movement envelope against the installation drawing.
- Drawing load label
- 600 kg MAX
- Drawing reach label
- 750 mm MAX
REFERENCE 0321-197
DC pulling-winch configuration — 750 lb (340 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 750 lb (340 kg as listed)
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 153:1
- Cable diameter × length
- 3 mm × 7.6 m (0.12 inch ×25 ft)
- Drum diameter × length
- 32 mm ×73 mm (1.26 ×2.87 inches)
- Mounting bolt pattern
- 80 mm, 2-M8 (3.15 inches)
- Layer schedule
- Layer 1: 750 lb (340 kg as listed), rope on drum 8.46 ft (2.58 m) ; Layer 2: 640 lb (291 kg as listed), rope on drum 18.37 ft (5.6 m) ; Layer 3: 558 lb (253 kg as listed), rope on drum 25 ft (7.6 m)
- Motor data
- 0.4 kW / 0.53 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 10 ft/min (3.05 m/min); current 4 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 8.2 ft/min (2.5 m/min); current 12 A
- First-layer point at 750 lb (340 kg as listed)
- Listed line speed 5.9 ft/min (1.8 m/min); current 25 A
REFERENCE 0321-198
DC pulling-winch configuration — 750 lb (340 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 750 lb (340 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 153:1
- Cable diameter × length
- 3 mm × 7.6 m (0.12 inch ×25 ft)
- Drum diameter × length
- 32 mm ×73 mm (1.26 ×2.87 inches)
- Mounting bolt pattern
- 80 mm, 2-M8 (3.15 inches)
- Layer schedule
- Layer 1: 750 lb (340 kg as listed), rope on drum 8.46 ft (2.58 m) ; Layer 2: 640 lb (291 kg as listed), rope on drum 18.37 ft (5.6 m) ; Layer 3: 558 lb (253 kg as listed), rope on drum 25 ft (7.6 m)
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 12 ft/min (3.65 m/min); current 2.5 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 10 ft/min (3.05 m/min); current 7 A
- First-layer point at 750 lb (340 kg as listed)
- Listed line speed 8 ft/min (2.44 m/min); current 14 A
REFERENCE 0321-199
DC pulling-winch configuration — 1500 lb (682 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 1500 lb (682 kg as listed)
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 153:1
- Cable diameter × length
- 4 mm ×7.6 m (0.156 inch ×25 ft)
- Drum diameter × length
- 32 mm ×73 mm (1.26 ×2.87 inches)
- Mounting bolt pattern
- 80 mm, 2-M8 (3.15 inches)
- Layer schedule
- Layer 1: 1500 lb (682 kg as listed), rope on drum 6.5 ft (1.98 m) ; Layer 2: 1227 lb (558 kg as listed), rope on drum 14.44 ft (4.4 m) ; Layer 3: 1038 lb (472 kg as listed), rope on drum 23.82 ft (7.26 m) ; Layer 4: 900 lb (409 kg as listed), rope on drum 25 ft (7.6 m)
- Motor data
- 0.6 kW /0.8 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 14 ft/min (4.26 m/min); current 4 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 10 ft/min (3.05 m/min); current 12 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 8 ft/min (2.44 m/min); current 25 A
- First-layer point at 1500 lb (682 kg as listed)
- Current 40 A; speed requires technical confirmation
REFERENCE 0321-200
DC pulling-winch configuration — 1500 lb (682 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 1500 lb (682 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 153:1
- Cable diameter × length
- 4 mm ×7.6 m (0.156 inch ×25 ft)
- Drum diameter × length
- 32 mm ×73 mm (1.26 ×2.87 inches)
- Mounting bolt pattern
- 80 mm, 2-M8 (3.15 inches)
- Layer schedule
- Layer 1: 1500 lb (682 kg as listed), rope on drum 6.5 ft (1.98 m) ; Layer 2: 1227 lb (558 kg as listed), rope on drum 14.44 ft (4.4 m) ; Layer 3: 1038 lb (472 kg as listed), rope on drum 23.82 ft (7.26 m) ; Layer 4: 900 lb (409 kg as listed), rope on drum 25 ft (7.6 m)
- Motor data
- 0.7 kW /0.9 HP
- First-layer point at 0 lb (0 kg as listed)
- Current 2.5 A; speed requires technical confirmation
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 11 ft/min (3.35 m/min); current 7 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 9 ft/min (2.74 m/min); current 15 A
- First-layer point at 1500 lb (682 kg as listed)
- Listed line speed 5 ft/min (1.52 m/min); current 25 A
REFERENCE 0321-201
DC pulling-winch configuration — 2000 lb (909 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 2000 lb (909 kg as listed)
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 253:1
- Cable diameter × length
- 4.8 mm ×7.6 m (0.19 inch ×25 ft)
- Drum diameter × length
- 38 mm ×80 mm (1.5 ×3.15 inches)
- Mounting bolt pattern
- 123×76 mm;4-M8 (4.84×3 inches)
- Layer schedule
- Layer 1: 2000 lb (909 kg as listed), rope on drum 7.2 ft (2.2 m) ; Layer 2: 1633 lb (742 kg as listed), rope on drum 16 ft (4.9 m) ; Layer 3: 1380 lb (627 kg as listed), rope on drum 25 ft (7.6 m)
- Motor data
- 0.7 kW /0.95 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 9 ft/min (2.74 m/min); current 8 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 5.9 ft/min (1.8 m/min); current 25 A
- First-layer point at 1500 lb (682 kg as listed)
- Listed line speed 4 ft/min (1.22 m/min); current 40 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 2 ft/min (0.6 m/min); current 62 A
REFERENCE 0321-202
DC pulling-winch configuration — 2000 lb (909 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 2000 lb (909 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 253:1
- Cable diameter × length
- 4.8 mm ×7.6 m (0.19 inch ×25 ft)
- Drum diameter × length
- 38 mm ×80 mm (1.5 ×3.15 inches)
- Mounting bolt pattern
- 123×76 mm;4-M8 (4.84×3 inches)
- Layer schedule
- Layer 1: 2000 lb (909 kg as listed), rope on drum 7.2 ft (2.2 m) ; Layer 2: 1633 lb (742 kg as listed), rope on drum 16 ft (4.9 m) ; Layer 3: 1380 lb (627 kg as listed), rope on drum 25 ft (7.6 m)
- Motor data
- 0.8 kW /1.1 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 10 ft/min (3.05 m/min); current 5 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 6.5 ft/min (1.98 m/min); current 14 A
- First-layer point at 1500 lb (682 kg as listed)
- Listed line speed 5 ft/min (1.52 m/min); current 22 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 2.2 ft/min (0.67 m/min); current 35 A
REFERENCE 0321-203
DC pulling-winch configuration — 2500 lb (1136 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 2500 lb (1136 kg as listed)
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 253:1
- Cable diameter × length
- 5.1 mm ×14 m (0.2 inch ×46 ft)
- Drum diameter × length
- 38 mm ×80 mm (1.5 ×3.15 inches)
- Mounting bolt pattern
- 123×76 mm;4-M8 (4.84×3 inches)
- Layer schedule
- Layer 1: 2500 lb (1136 kg as listed), rope on drum 6.56 ft (2 m) ; Layer 2: 2021 lb (918 kg as listed), rope on drum 14.76 ft (4.5 m) ; Layer 3: 1696 lb (771 kg as listed), rope on drum 24.6 ft (7.5 m) ; Layer 4: 1462 lb (664 kg as listed), rope on drum 36 ft (11 m) ; Layer 5: 1284 lb (583 kg as listed), rope on drum 46 ft (14 m)
- Motor data
- 0.9 kW /1.2 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 9 ft/min (2.74 m/min); current 13 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 7.5 ft/min (2.28 m/min); current 40 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 5.9 ft/min (1.8 m/min); current 68 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 2 ft/min (0.6 m/min); current 95 A
- First-layer point at 2500 lb (1136 kg as listed)
- Listed line speed 1 ft/min (0.3 m/min); current 150 A
REFERENCE 0321-204
DC pulling-winch configuration — 2500 lb (1136 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 2500 lb (1136 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 253:1
- Cable diameter × length
- 5.1 mm ×14 m (0.2 inch ×46 ft)
- Drum diameter × length
- 38 mm ×80 mm (1.5 ×3.15 inches)
- Mounting bolt pattern
- 123×76 mm;4-M8 (4.84×3 inches)
- Layer schedule
- Layer 1: 2500 lb (1136 kg as listed), rope on drum 6.56 ft (2 m) ; Layer 2: 2021 lb (918 kg as listed), rope on drum 14.76 ft (4.5 m) ; Layer 3: 1696 lb (771 kg as listed), rope on drum 24.6 ft (7.5 m) ; Layer 4: 1462 lb (664 kg as listed), rope on drum 36 ft (11 m) ; Layer 5: 1284 lb (583 kg as listed), rope on drum 46 ft (14 m)
- Motor data
- 1.0 kW /1.3 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 10 ft/min (3.05 m/min); current 6.5 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 8.2 ft/min (2.5 m/min); current 20 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 6.5 ft/min (1.98 m/min); current 35 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 2.2 ft/min (0.67 m/min); current 52 A
- First-layer point at 2500 lb (1136 kg as listed)
- Current 82 A; speed requires technical confirmation
REFERENCE 0321-205
DC pulling-winch configuration — 3000 lb (1363 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 3000 lb (1363 kg as listed)
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 253:1
- Cable diameter × length
- 5.6 mm ×14 m (0.22 inch ×46 ft)
- Drum diameter × length
- 38 mm ×80 mm (1.5 ×3.15 inches)
- Mounting bolt pattern
- 123×76 mm;4-M8 (4.84×3 inches)
- Layer schedule
- Layer 1: 3000 lb (1363 kg as listed), rope on drum 6.07 ft (1.85 m) ; Layer 2: 2386 lb (1084 kg as listed), rope on drum 13.68 ft (4.17 m) ; Layer 3: 1981 lb (900 kg as listed), rope on drum 22.96 ft (7 m) ; Layer 4: 1694 lb (770 kg as listed), rope on drum 33.8 ft (10.3 m) ; Layer 5: 1479 lb (672 kg as listed), rope on drum 46 ft (14 m)
- Motor data
- 0.95 kW /1.3 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 9 ft/min (2.74 m/min); current 14 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 7.5 ft/min (2.28 m/min); current 50 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 5.9 ft/min (1.8 m/min); current 100 A
- First-layer point at 3000 lb (1363 kg as listed)
- Listed line speed 2 ft/min (0.6 m/min); current 160 A
REFERENCE 0321-206
DC pulling-winch configuration — 3000 lb (1363 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 3000 lb (1363 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 253:1
- Cable diameter × length
- 5.6 mm ×14 m (0.22 inch ×46 ft)
- Drum diameter × length
- 38 mm ×80 mm (1.5 ×3.15 inches)
- Mounting bolt pattern
- 123×76 mm;4-M8 (4.84×3 inches)
- Layer schedule
- Layer 1: 3000 lb (1363 kg as listed), rope on drum 6.07 ft (1.85 m) ; Layer 2: 2386 lb (1084 kg as listed), rope on drum 13.68 ft (4.17 m) ; Layer 3: 1981 lb (900 kg as listed), rope on drum 22.96 ft (7 m) ; Layer 4: 1694 lb (770 kg as listed), rope on drum 33.8 ft (10.3 m) ; Layer 5: 1479 lb (672 kg as listed), rope on drum 46 ft (14 m)
- Motor data
- 1.05 kW /1.4 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 10 ft/min (3.05 m/min); current 7 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 8.2 ft/min (2.5 m/min); current 30 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 6.5 ft/min (1.98 m/min); current 55 A
- First-layer point at 3000 lb (1363 kg as listed)
- Listed line speed 2.2 ft/min (0.67 m/min); current 86 A
REFERENCE 0321-207
DC pulling-winch configuration — 3500 lb (1591 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 3500 lb (1591 kg as listed)
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 145:1
- Cable diameter × length
- 5.6 mm ×14 m (0.22 inch ×46 ft)
- Drum diameter × length
- 55 mm ×75 mm (2.16 ×2.95 inches)
- Mounting bolt pattern
- 123×76 mm;4-M8 (4.84×3 inches)
- Layer schedule
- Layer 1: 3500 lb (1591 kg as listed), rope on drum 7.8 ft (2.38 m) ; Layer 2: 2954 lb (1343 kg as listed), rope on drum 17.06 ft (5.2 m) ; Layer 3: 2555 lb (1161 kg as listed), rope on drum 27.76 ft (8.46 m) ; Layer 4: 2251 lb (1023 kg as listed), rope on drum 39.7 ft (12.1 m) ; Layer 5: 2021 lb (919 kg as listed), rope on drum 46 ft (14 m)
- Motor data
- 1.2 kW /1.6 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 16 ft/min (4.88 m/min); current 15 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 12.5 ft/min (3.81 m/min); current 50 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 9.6 ft/min (2.92 m/min); current 130 A
- First-layer point at 3500 lb (1591 kg as listed)
- Listed line speed 4 ft/min (1.22 m/min); current 200 A
REFERENCE 0321-208
DC pulling-winch configuration — 3500 lb (1591 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 3500 lb (1591 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 145:1
- Cable diameter × length
- 5.6 mm ×14 m (0.22 inch ×46 ft)
- Drum diameter × length
- 55 mm ×75 mm (2.16 ×2.95 inches)
- Mounting bolt pattern
- 123×76 mm;4-M8 (4.84×3 inches)
- Layer schedule
- Layer 1: 3500 lb (1591 kg as listed), rope on drum 7.8 ft (2.38 m) ; Layer 2: 2954 lb (1343 kg as listed), rope on drum 17.06 ft (5.2 m) ; Layer 3: 2555 lb (1161 kg as listed), rope on drum 27.76 ft (8.46 m) ; Layer 4: 2251 lb (1023 kg as listed), rope on drum 39.7 ft (12.1 m) ; Layer 5: 2021 lb (919 kg as listed), rope on drum 46 ft (14 m)
- Motor data
- 1.3 kW /1.8 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 18 ft/min (5.48 m/min); current 7 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 14 ft/min (4.26 m/min); current 20 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 10.5 ft/min (3.2 m/min); current 75 A
- First-layer point at 3500 lb (1591 kg as listed)
- Listed line speed 4.5 ft/min (1.37 m/min); current 110 A
REFERENCE 0321-209
DC pulling-winch configuration — 4000 lb (1818 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 4000 lb (1818 kg as listed)
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 145:1
- Cable diameter × length
- 6.0 mm ×12 m (0.24 inch ×39 ft)
- Drum diameter × length
- 55 mm ×75 mm (2.16 ×2.95 inches)
- Mounting bolt pattern
- 123×76 mm;4-M8 (4.84×3 inches)
- Layer schedule
- Layer 1: 4000 lb (1818 kg as listed), rope on drum 7.87 ft (2.4 m) ; Layer 2: 3376 lb (1534 kg as listed), rope on drum 17.26 ft (5.26 m) ; Layer 3: 2920 lb (1327 kg as listed), rope on drum 28.2 ft (8.59 m) ; Layer 4: 2573 lb (1169 kg as listed), rope on drum 39 ft (12 m)
- Motor data
- 1.3 kW /1.75 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 16 ft/min (4.88 m/min); current 16 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 12.5 ft/min (3.81 m/min); current 50 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 9.6 ft/min (2.92 m/min); current 130 A
- First-layer point at 4000 lb (1818 kg as listed)
- Listed line speed 4 ft/min (1.22 m/min); current 220 A
REFERENCE 0321-210
DC pulling-winch configuration — 4000 lb (1818 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 4000 lb (1818 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 145:1
- Cable diameter × length
- 6.0 mm ×12 m (0.24 inch ×39 ft)
- Drum diameter × length
- 55 mm ×75 mm (2.16 ×2.95 inches)
- Mounting bolt pattern
- 123×76 mm;4-M8 (4.84×3 inches)
- Layer schedule
- Layer 1: 4000 lb (1818 kg as listed), rope on drum 7.87 ft (2.4 m) ; Layer 2: 3376 lb (1534 kg as listed), rope on drum 17.26 ft (5.26 m) ; Layer 3: 2920 lb (1327 kg as listed), rope on drum 28.2 ft (8.59 m) ; Layer 4: 2573 lb (1169 kg as listed), rope on drum 39 ft (12 m)
- Motor data
- 1.4 kW /1.9 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 18 ft/min (5.48 m/min); current 8 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 14 ft/min (4.26 m/min); current 20 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 10.5 ft/min (3.2 m/min); current 75 A
- First-layer point at 4000 lb (1818 kg as listed)
- Listed line speed 4.5 ft/min (1.37 m/min); current 120 A
REFERENCE 0321-211
DC pulling-winch configuration — 4500 lb (2045 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 4500 lb (2045 kg as listed)
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 145:1
- Cable diameter × length
- 6.0 mm ×12 m (0.24 inch ×39 ft)
- Drum diameter × length
- 55 mm ×75 mm (2.16 ×2.95 inches)
- Mounting bolt pattern
- 123×76 mm;4-M8 (4.84×3 inches)
- Layer schedule
- Layer 1: 4500 lb (2045 kg as listed), rope on drum 7.87 ft (2.4 m) ; Layer 2: 3798 lb (1726 kg as listed), rope on drum 17.26 ft (5.26 m) ; Layer 3: 3285 lb (1493 kg as listed), rope on drum 28.2 ft (8.59 m) ; Layer 4: 2895 lb (1316 kg as listed), rope on drum 39 ft (12 m)
- Motor data
- 1.5 kW /2.0 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 16 ft/min (4.88 m/min); current 17 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 12.5 ft/min (3.81 m/min); current 50 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 9.6 ft/min (2.92 m/min); current 130 A
- First-layer point at 4500 lb (2045 kg as listed)
- Listed line speed 3 ft/min (0.914 m/min); current 245 A
REFERENCE 0321-212
DC pulling-winch configuration — 4500 lb (2045 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 4500 lb (2045 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 145:1
- Cable diameter × length
- 6.0 mm ×12 m (0.24 inch ×39 ft)
- Drum diameter × length
- 55 mm ×75 mm (2.16 ×2.95 inches)
- Mounting bolt pattern
- 123×76 mm;4-M8 (4.84×3 inches)
- Layer schedule
- Layer 1: 4500 lb (2045 kg as listed), rope on drum 7.87 ft (2.4 m) ; Layer 2: 3798 lb (1726 kg as listed), rope on drum 17.26 ft (5.26 m) ; Layer 3: 3285 lb (1493 kg as listed), rope on drum 28.2 ft (8.59 m) ; Layer 4: 2895 lb (1316 kg as listed), rope on drum 39 ft (12 m)
- Motor data
- 1.6 kW /2.2 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 18 ft/min (5.48 m/min); current 9 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 14 ft/min (4.26 m/min); current 20 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 10.5 ft/min (3.2 m/min); current 75 A
- First-layer point at 4500 lb (2045 kg as listed)
- Listed line speed 3.5 ft/min (1.07 m/min); current 130 A
REFERENCE 0321-213
DC pulling-winch configuration — 5000 lb (2272 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 5000 lb (2272 kg as listed)
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 294:1
- Cable diameter × length
- 6.0 mm ×24 m (0.24 inch ×79 ft)
- Drum diameter × length
- 63 mm ×140 mm (2.48 ×5.5 inches)
- Mounting bolt pattern
- 165×114 mm;4-M10 (6.5×4.5 inches)
- Layer schedule
- Layer 1: 5000 lb (2272 kg as listed), rope on drum 15.98 ft (4.87 m) ; Layer 2: 4259 lb (1936 kg as listed), rope on drum 34.78 ft (10.6 m) ; Layer 3: 3709 lb (1686 kg as listed), rope on drum 56.43 ft (17.2 m) ; Layer 4: 3285 lb (1493 kg as listed), rope on drum 79 ft (24 m)
- Motor data
- 1.7 kW /2.3 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 15 ft/min (4.57 m/min); current 18 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 11 ft/min (3.35 m/min); current 100 A
- First-layer point at 3000 lb (1363 kg as listed)
- Listed line speed 8 ft/min (2.44 m/min); current 200 A
- First-layer point at 5000 lb (2272 kg as listed)
- Listed line speed 5 ft/min (1.52 m/min); current 290 A
REFERENCE 0321-214
DC pulling-winch configuration — 5000 lb (2272 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 5000 lb (2272 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 294:1
- Cable diameter × length
- 6.0 mm ×24 m (0.24 inch ×79 ft)
- Drum diameter × length
- 63 mm ×140 mm (2.48 ×5.5 inches)
- Mounting bolt pattern
- 165×114 mm;4-M10 (6.5×4.5 inches)
- Layer schedule
- Layer 1: 5000 lb (2272 kg as listed), rope on drum 15.98 ft (4.87 m) ; Layer 2: 4259 lb (1936 kg as listed), rope on drum 34.78 ft (10.6 m) ; Layer 3: 3709 lb (1686 kg as listed), rope on drum 56.43 ft (17.2 m) ; Layer 4: 3285 lb (1493 kg as listed), rope on drum 79 ft (24 m)
- Motor data
- 1.8 kW /2.45 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 17 ft/min (5.18 m/min); current 10 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 13 ft/min (3.96 m/min); current 54 A
- First-layer point at 3000 lb (1363 kg as listed)
- Listed line speed 10 ft/min (3.05 m/min); current 110 A
- First-layer point at 5000 lb (2272 kg as listed)
- Listed line speed 6 ft/min (1.83 m/min); current 150 A
REFERENCE 0321-215
Hand-operated pulling-winch reference
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Carton quantity
- 6 pieces
- Packing dimensions
- 49.5 ×44.5 ×17.5 cm
- Gross / net mass (packing basis to confirm)
- 30 /28 kg
REFERENCE 0321-216
Hand-operated pulling-winch reference
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Carton quantity
- 6 pieces
- Packing dimensions
- 49.5 ×44.5 ×17.5 cm
- Gross / net mass (packing basis to confirm)
- 32 /30 kg
REFERENCE 0321-217
AC wire-rope lifting configuration — 50 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Rated supply options
- 220 /230 V
- Input power
- 180 W
- Rated lifting mass
- 50 kg
- Lifting speed
- 10 m/min
- Lifting height
- 8 m
- Carton quantity
- 4 pieces
- Packing dimensions
- 41×30×22 cm
- Gross / net mass (packing basis to confirm)
- 21/20 kg
REFERENCE 0321-218
AC wire-rope lifting configuration — 100 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Rated supply options
- 220 /230 V
- Input power
- 180 W
- Rated lifting mass
- 100 kg
- Lifting speed
- 5 m/min
- Lifting height
- 4 m
- Carton quantity
- 4 pieces
- Packing dimensions
- 41×30×22 cm
- Gross / net mass (packing basis to confirm)
- 21/20 kg
REFERENCE 0321-219
AC wire-rope lifting configuration — 100 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Rated supply options
- 220 /230 V
- Input power
- 450 W
- Rated lifting mass
- 100 kg
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Carton quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Gross / net mass (packing basis to confirm)
- 24/22 kg
REFERENCE 0321-220
AC wire-rope lifting configuration — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Rated supply options
- 220 /230 V
- Input power
- 450 W
- Rated lifting mass
- 200 kg
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Carton quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Gross / net mass (packing basis to confirm)
- 24/22 kg
REFERENCE 0321-221
AC wire-rope lifting configuration — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Rated supply options
- 220 /230 V
- Input power
- 500 W
- Rated lifting mass
- 125 kg
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Carton quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Gross / net mass (packing basis to confirm)
- 25/23 kg
REFERENCE 0321-222
AC wire-rope lifting configuration — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Rated supply options
- 220 /230 V
- Input power
- 500 W
- Rated lifting mass
- 250 kg
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Carton quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Gross / net mass (packing basis to confirm)
- 25/23 kg
REFERENCE 0321-223
AC wire-rope lifting configuration — 150 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Rated supply options
- 220 /230 V
- Input power
- 550 W
- Rated lifting mass
- 150 kg
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Carton quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Gross / net mass (packing basis to confirm)
- 26/24 kg
REFERENCE 0321-224
AC wire-rope lifting configuration — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Rated supply options
- 220 /230 V
- Input power
- 550 W
- Rated lifting mass
- 300 kg
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Carton quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Gross / net mass (packing basis to confirm)
- 26/24 kg
REFERENCE 0321-225
AC wire-rope lifting configuration — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Rated supply options
- 220 /230 V
- Input power
- 750 W
- Rated lifting mass
- 200 kg
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Carton quantity
- 2 pieces
- Packing dimensions
- 52×41×17 cm
- Gross / net mass (packing basis to confirm)
- 35/33 kg
REFERENCE 0321-226
AC wire-rope lifting configuration — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Rated supply options
- 220 /230 V
- Input power
- 750 W
- Rated lifting mass
- 400 kg
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Carton quantity
- 2 pieces
- Packing dimensions
- 52×41×17 cm
- Gross / net mass (packing basis to confirm)
- 35/33 kg
REFERENCE 0321-227
AC wire-rope lifting configuration — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Rated supply options
- 220 /230 V
- Input power
- 900 W
- Rated lifting mass
- 250 kg
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Carton quantity
- 2 pieces
- Packing dimensions
- 52×41×17 cm
- Gross / net mass (packing basis to confirm)
- 36/34 kg
REFERENCE 0321-228
AC wire-rope lifting configuration — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Rated supply options
- 220 /230 V
- Input power
- 900 W
- Rated lifting mass
- 500 kg
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Carton quantity
- 2 pieces
- Packing dimensions
- 52×41×17 cm
- Gross / net mass (packing basis to confirm)
- 36/34 kg
REFERENCE 0321-229
AC wire-rope lifting configuration — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Rated supply options
- 220 /230 V
- Input power
- 1050 W
- Rated lifting mass
- 300 kg
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Carton quantity
- 2 pieces
- Packing dimensions
- 52×41×17 cm
- Gross / net mass (packing basis to confirm)
- 37/35 kg
REFERENCE 0321-230
AC wire-rope lifting configuration — 600 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Rated supply options
- 220 /230 V
- Input power
- 1050 W
- Rated lifting mass
- 600 kg
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Carton quantity
- 2 pieces
- Packing dimensions
- 52×41×17 cm
- Gross / net mass (packing basis to confirm)
- 37/35 kg
REFERENCE 0321-231
AC wire-rope lifting configuration — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Rated supply options
- 220 /230 V
- Input power
- 1350 W
- Rated lifting mass
- 400 kg
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Carton quantity
- 2 pieces
- Packing dimensions
- 52×44×17 cm
- Gross / net mass (packing basis to confirm)
- 40/38 kg
REFERENCE 0321-232
AC wire-rope lifting configuration — 800 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Rated supply options
- 220 /230 V
- Input power
- 1350 W
- Rated lifting mass
- 800 kg
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Carton quantity
- 2 pieces
- Packing dimensions
- 52×44×17 cm
- Gross / net mass (packing basis to confirm)
- 40/38 kg
REFERENCE 0321-233
AC wire-rope lifting configuration — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Rated supply options
- 220 /230 V
- Input power
- 1600 W
- Rated lifting mass
- 500 kg
- Lifting speed
- 10 m/min
- Lifting height
- 12 m
- Carton quantity
- 1 piece
- Packing dimensions
- 54×22×31 cm
- Gross / net mass (packing basis to confirm)
- 31/30 kg
REFERENCE 0321-234
AC wire-rope lifting configuration — 999 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Rated supply options
- 220 /230 V
- Input power
- 1600 W
- Rated lifting mass
- 999 kg
- Lifting speed
- 5 m/min
- Lifting height
- 6 m
- Carton quantity
- 1 piece
- Packing dimensions
- 54×22×31 cm
- Gross / net mass (packing basis to confirm)
- 31/30 kg
REFERENCE 0321-235
Powered beam-trolley configuration — 180 W
Compare beam flange, curve radius, suspension interface, travel controls and permitted load. Obtain the actual beam and installation drawing before selecting the trolley.
- Rated supply options
- 220 /230 V
- Input power
- 180 W
- Travel speed
- 15 m/min
- Assembling height reference
- 3 m
- Minimum curved-track radius
- 1 m
- Drawing dimensions A/B/C/D/F
- 301 /178 /350 /253 /5 mm
- Steel-beam number reference
- 10–22
- Track width reference
- 68–110 mm
- Net mass
- 14.5 kg
- Packing dimensions
- 35 ×30 ×22 cm
REFERENCE 0321-236
Powered beam-trolley configuration — 220 W
Compare beam flange, curve radius, suspension interface, travel controls and permitted load. Obtain the actual beam and installation drawing before selecting the trolley.
- Rated supply options
- 110 /120 V
- Input power
- 220 W
- Travel speed
- 16.4 m/min
- Assembling height reference
- 3 m
- Minimum curved-track radius
- 1 m
- Drawing dimensions A/B/C/D/F
- 301 /178 /350 /253 /5 mm
- Steel-beam number reference
- 10–22
- Track width reference
- 68–110 mm
- Net mass
- 14.5 kg
- Packing dimensions
- 35 ×30 ×22 cm
REFERENCE 0321-237
DC pulling-winch configuration — 1500 lb (682 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 1500 lb (682 kg as listed)
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 153:1
- Cable diameter × length
- 4 mm ×7.6 m (0.156 inch ×25 ft)
- Drum diameter × length
- 32 mm ×73 mm (1.26 ×2.87 inches)
- Mounting bolt pattern
- 80 mm, 2-M8 (3.15 inches)
- Layer schedule
- Layer 1: 1500 lb (682 kg as listed), rope on drum 6.5 ft (1.98 m) ; Layer 2: 1227 lb (558 kg as listed), rope on drum 14.44 ft (4.4 m) ; Layer 3: 1038 lb (472 kg as listed), rope on drum 23.82 ft (7.26 m) ; Layer 4: 900 lb (409 kg as listed), rope on drum 25 ft (7.6 m)
- Motor data
- 0.6 kW /0.8 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 14 ft/min (4.26 m/min); current 4 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 10 ft/min (3.05 m/min); current 12 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 8 ft/min (2.44 m/min); current 25 A
- First-layer point at 1500 lb (682 kg as listed)
- Listed line speed 4 ft/min (1.22 m/min); current 40 A
REFERENCE 0321-238
DC pulling-winch configuration — 1500 lb (682 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 1500 lb (682 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 153:1
- Cable diameter × length
- 4 mm ×7.6 m (0.156 inch ×25 ft)
- Drum diameter × length
- 32 mm ×73 mm (1.26 ×2.87 inches)
- Mounting bolt pattern
- 80 mm, 2-M8 (3.15 inches)
- Layer schedule
- Layer 1: 1500 lb (682 kg as listed), rope on drum 6.5 ft (1.98 m) ; Layer 2: 1227 lb (558 kg as listed), rope on drum 14.44 ft (4.4 m) ; Layer 3: 1038 lb (472 kg as listed), rope on drum 23.82 ft (7.26 m) ; Layer 4: 900 lb (409 kg as listed), rope on drum 25 ft (7.6 m)
- Motor data
- 0.7 kW /0.9 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 15.5 ft/min (4.72 m/min); current 2.5 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 11 ft/min (3.35 m/min); current 7 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 9 ft/min (2.74 m/min); current 15 A
- First-layer point at 1500 lb (682 kg as listed)
- Listed line speed 5 ft/min (1.52 m/min); current 25 A
REFERENCE 0321-239
DC pulling-winch configuration — 2500 lb (1136 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 2500 lb (1136 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 253:1
- Cable diameter × length
- 5.1 mm ×14 m (0.2 inch ×46 ft)
- Drum diameter × length
- 38 mm ×80 mm (1.5 ×3.15 inches)
- Mounting bolt pattern
- 123×76 mm;4-M8 (4.84×3 inches)
- Layer schedule
- Layer 1: 2500 lb (1136 kg as listed), rope on drum 6.56 ft (2 m) ; Layer 2: 2021 lb (918 kg as listed), rope on drum 14.76 ft (4.5 m) ; Layer 3: 1696 lb (771 kg as listed), rope on drum 24.6 ft (7.5 m) ; Layer 4: 1462 lb (664 kg as listed), rope on drum 36 ft (11 m) ; Layer 5: 1284 lb (583 kg as listed), rope on drum 46 ft (14 m)
- Motor data
- 1.0 kW /1.36 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 10 ft/min (3.05 m/min); current 6.5 A
- First-layer point at 500 lb (227 kg as listed)
- Listed line speed 8.2 ft/min (2.5 m/min); current 20 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 6.5 ft/min (1.98 m/min); current 35 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 2.2 ft/min (0.67 m/min); current 52 A
- First-layer point at 2500 lb (1136 kg as listed)
- Listed line speed 1.2 ft/min (0.36 m/min); current 82 A
REFERENCE 0321-240
Braked geared-drive reference — 180 W
Compare the geared output, brake holding duty, mounting interface and motor supply. This component reference does not establish the capacity of a complete lifting assembly.
- Supply options
- 220 /230 V
- Input power
- 180 W
- Output speed
- 62 r/min
- Output torque
- 10 N·m
REFERENCE 0321-241
Braked geared-drive reference — 500 W
Compare the geared output, brake holding duty, mounting interface and motor supply. This component reference does not establish the capacity of a complete lifting assembly.
- Supply options
- 220 /230 V
- Input power
- 500 W
- Output speed
- 55 r/min
- Output torque
- 35 N·m
REFERENCE 0321-242
Braked geared-drive reference — 900 W
Compare the geared output, brake holding duty, mounting interface and motor supply. This component reference does not establish the capacity of a complete lifting assembly.
- Supply options
- 220 /230 V
- Input power
- 900 W
- Output speed
- 48 r/min
- Output torque
- 90 N·m
REFERENCE 0321-243
Braked geared-drive reference — 1350 W
Compare the geared output, brake holding duty, mounting interface and motor supply. This component reference does not establish the capacity of a complete lifting assembly.
- Supply options
- 220 /230 V
- Input power
- 1350 W
- Output speed
- 48 r/min
- Output torque
- 170 N·m
REFERENCE 0321-244
Braked geared-drive reference — 1600 W
Compare the geared output, brake holding duty, mounting interface and motor supply. This component reference does not establish the capacity of a complete lifting assembly.
- Supply options
- 220 /230 V
- Input power
- 1600 W
- Output speed
- 35 r/min
- Output torque
- 260 N·m
REFERENCE 0321-245
Braked geared-drive reference — 220 W
Compare the geared output, brake holding duty, mounting interface and motor supply. This component reference does not establish the capacity of a complete lifting assembly.
- Supply options
- 110 /120 V
- Input power
- 220 W
- Output speed
- 75 r/min
- Output torque
- 10 N·m
REFERENCE 0321-246
Braked geared-drive reference — 560 W
Compare the geared output, brake holding duty, mounting interface and motor supply. This component reference does not establish the capacity of a complete lifting assembly.
- Supply options
- 110 /120 V
- Input power
- 560 W
- Output speed
- 55 r/min
- Output torque
- 38 N·m
REFERENCE 0321-247
Braked geared-drive reference — 1000 W
Compare the geared output, brake holding duty, mounting interface and motor supply. This component reference does not establish the capacity of a complete lifting assembly.
- Supply options
- 110 /120 V
- Input power
- 1000 W
- Output speed
- 57 r/min
- Output torque
- 90 N·m
REFERENCE 0321-248
Braked geared-drive reference — 1350 W
Compare the geared output, brake holding duty, mounting interface and motor supply. This component reference does not establish the capacity of a complete lifting assembly.
- Supply options
- 110 /120 V
- Input power
- 1350 W
- Output speed
- 45 r/min
- Output torque
- 170 N·m
REFERENCE 0321-249
Braked geared-drive reference — 1450 W
Compare the geared output, brake holding duty, mounting interface and motor supply. This component reference does not establish the capacity of a complete lifting assembly.
- Supply options
- 110 /120 V
- Input power
- 1450 W
- Output speed
- 33 r/min
- Output torque
- 220 N·m
REFERENCE 0321-250
Rotary mounting-frame reference — 600 kg
Review reach and hanging load as a matched condition. Check the mounting structure, fixing method, hoist interface and movement envelope against the installation drawing.
- Rated hanging load
- 600 kg
- Maximum reach
- 750 mm
- Carton quantity
- 4 pieces
- Packing dimensions
- 86 ×22 ×20 cm
- Gross /net mass (packing basis to confirm)
- 27 /25 kg
REFERENCE 0321-251
Rotary mounting-frame reference — 300 kg
Review reach and hanging load as a matched condition. Check the mounting structure, fixing method, hoist interface and movement envelope against the installation drawing.
- Rated hanging load
- 300 kg
- Maximum reach
- 1100 mm
- Carton quantity
- 4 pieces
- Packing dimensions
- 86 ×22 ×20 cm
- Gross /net mass (packing basis to confirm)
- 35 /33 kg
REFERENCE 0321-252
Variable-speed DC pulling-winch reference — 300 W
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- DC supply
- 12 V
- Input power
- 300 W
- Rated pull reference
- 500 lb (227 kg as listed)
- No-load speed
- 0–1.0 m/min variable
- Wire rope
- 5.6 mm ×4.6 m (0.22 inch ×15 ft as listed)
- Carton quantity
- 1 piece
- Packing dimensions
- 36.5 ×29 ×27 cm
- Net mass
- 7.2 kg (15.8 lb as listed)
REFERENCE 0321-253
Variable-speed DC pulling-winch reference — 600 W
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- DC supply
- 24 V
- Input power
- 600 W
- Rated pull reference
- 1000 lb (454 kg as listed)
- No-load speed
- 0–1.0 m/min variable
- Wire rope
- 5.6 mm ×4.6 m (0.22 inch ×15 ft as listed)
- Carton quantity
- 1 piece
- Packing dimensions
- 36.5 ×29 ×27 cm
- Net mass
- 7.2 kg (15.8 lb as listed)
REFERENCE 0321-254
DC pulling-winch configuration — 2000 lb (909 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 2000 lb (909 kg as listed)
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 253:1
- Cable diameter × length
- 4.8 mm ×7.6 m (0.19 inch ×25 ft)
- Drum diameter × length
- 38 mm ×80 mm (1.5×3.15 inch)
- Mounting bolt pattern
- 123×76 mm,4-M8 (4.84×3 inch)
- Layer schedule
- Layer 1: 2000 lb (909 kg as listed), rope on drum 5.5 ft (1.68 m) ; Layer 2: 1586 lb (721 kg as listed), rope on drum 12.43 ft (3.79 m) ; Layer 3: 1314 lb (597 kg as listed), rope on drum 20.8 ft (6.34 m) ; Layer 4: 1121 lb (509 kg as listed), rope on drum 25 ft (7.6 m)
- Motor data
- 0.8 kW /1.1 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 14 ft/min (4.26 m/min); current 8 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 10 ft/min (3.05 m/min); current 35 A
- First-layer point at 1500 lb (682 kg as listed)
- Listed line speed 8 ft/min (2.44 m/min); current 58 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 4 ft/min (1.22 m/min); current 85 A
REFERENCE 0321-255
DC pulling-winch configuration — 2000 lb (909 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 2000 lb (909 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 253:1
- Cable diameter × length
- 4.8 mm ×7.6 m (0.19 inch ×25 ft)
- Drum diameter × length
- 38 mm ×80 mm (1.5×3.15 inch)
- Mounting bolt pattern
- 123×76 mm,4-M8 (4.84×3 inch)
- Layer schedule
- Layer 1: 2000 lb (909 kg as listed), rope on drum 5.5 ft (1.68 m) ; Layer 2: 1586 lb (721 kg as listed), rope on drum 12.43 ft (3.79 m) ; Layer 3: 1314 lb (597 kg as listed), rope on drum 20.8 ft (6.34 m) ; Layer 4: 1121 lb (509 kg as listed), rope on drum 25 ft (7.6 m)
- Motor data
- 0.9 kW /1.2 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 15.5 ft/min (4.72 m/min); current 5 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 11 ft/min (3.35 m/min); current 20 A
- First-layer point at 1500 lb (682 kg as listed)
- Listed line speed 9 ft/min (2.74 m/min); current 35 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 5 ft/min (1.52 m/min); current 45 A
REFERENCE 0321-256
Pulling-winch dimensional reference
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Drawing overall length
- 308 mm
- Drawing overall width
- 102 mm
- Drawing overall height
- 109 mm
- Drawing mounting dimensions
- 123 ×76 mm
- Drawing drum diameter /length
- 38 /80 mm
REFERENCE 0321-257
DC pulling-winch configuration — 5000 lb (2272 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 5000 lb (2272 kg as listed)
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 294:1
- Cable diameter × length
- 6 mm ×24 m (0.24 inch ×79 ft)
- Drum diameter × length
- 63 mm ×140 mm (2.48×5.5 inches)
- Mounting bolt pattern
- 167×115 mm,4-M10 (6.6×4.53 inches)
- Layer schedule
- Layer 1: 5000 lb (2272 kg as listed), rope on drum 15.98 ft (4.87 m) ; Layer 2: 4259 lb (1936 kg as listed), rope on drum 34.78 ft (10.6 m) ; Layer 3: 3709 lb (1686 kg as listed), rope on drum 56.43 ft (17.2 m) ; Layer 4: 3285 lb (1493 kg as listed), rope on drum 79 ft (24 m)
- Motor data
- 1.7 kW /2.3 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 15 ft/min (4.57 m/min); current 18 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 11 ft/min (3.35 m/min); current 100 A
- First-layer point at 3000 lb (1363 kg as listed)
- Listed line speed 8 ft/min (2.44 m/min); current 200 A
- First-layer point at 5000 lb (2272 kg as listed)
- Listed line speed 5 ft/min (1.52 m/min); current 290 A
REFERENCE 0321-258
DC pulling-winch configuration — 5000 lb (2272 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 5000 lb (2272 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 294:1
- Cable diameter × length
- 6 mm ×24 m (0.24 inch ×79 ft)
- Drum diameter × length
- 63 mm ×140 mm (2.48×5.5 inches)
- Mounting bolt pattern
- 167×115 mm,4-M10 (6.6×4.53 inches)
- Layer schedule
- Layer 1: 5000 lb (2272 kg as listed), rope on drum 15.98 ft (4.87 m) ; Layer 2: 4259 lb (1936 kg as listed), rope on drum 34.78 ft (10.6 m) ; Layer 3: 3709 lb (1686 kg as listed), rope on drum 56.43 ft (17.2 m) ; Layer 4: 3285 lb (1493 kg as listed), rope on drum 79 ft (24 m)
- Motor data
- 1.8 kW /2.45 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 17 ft/min (5.18 m/min); current 10 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 13 ft/min (3.96 m/min); current 55 A
- First-layer point at 3000 lb (1363 kg as listed)
- Listed line speed 10 ft/min (3.05 m/min); current 110 A
- First-layer point at 5000 lb (2272 kg as listed)
- Listed line speed 6 ft/min (1.83 m/min); current 150 A
REFERENCE 0321-259
Pulling-winch dimensional reference
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Drawing overall length
- 470 mm
- Drawing overall width
- 180 mm
- Drawing overall height
- 193 mm
- Drawing intermediate width
- 156 mm
- Mounting dimensions
- 167 ×115 mm
- Drum diameter /length
- 63 /140 mm
REFERENCE 0321-260
Portable DC pulling-winch reference — 0.30 kW /0.4 HP
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Motor construction
- Permanent magnet
- DC supply
- 12 V
- Listed maximum current
- 40 A
- Loaded line speed
- 6 ft/min (1.8 m/min as listed)
- Wire rope
- 5.1 mm ×9 m (0.2 inch ×30 ft)
- Cord-length references
- 15 ft /9.9 ft, separate source-order references; roles to confirm
- Overall L×W×H
- 240 ×254 ×190 mm
- Packing dimensions
- 60 ×37 ×26.5 cm
- Gross /net mass
- 24 /22 kg
- Listed package feature
- Mounting plate and hand crank; agreed packing list required
- Motor rating
- 0.30 kW /0.4 HP
- Pulling capacity reference
- 2000 lb /907 kg as listed
REFERENCE 0321-261
Portable DC pulling-winch reference
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Motor construction
- Permanent magnet
- DC supply
- 12 V
- Listed maximum current
- 50 A
- Loaded line speed
- 6 ft/min (1.8 m/min as listed)
- Wire rope
- 5.6 mm ×9 m (0.22 inch ×30 ft)
- Cord-length references
- 15 ft /9.9 ft, separate source-order references; roles to confirm
- Overall L×W×H
- 260 ×305 ×193 mm
- Packing dimensions
- 35 ×33.5 ×24.5 cm
- Gross /net mass
- 16 /15 kg
- Listed package feature
- Mounting plate and hand crank; agreed packing list required
REFERENCE 0321-262
Manual pulling-winch construction
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Line construction
- Cable
- Cable length
- 7.6 m (25 ft)
- Carton quantity
- 6 pieces
- Packing dimensions
- 49.5 ×44.5 ×17.5 cm
- Gross /net mass (packing basis to confirm)
- 32 /30 kg
REFERENCE 0321-263
Manual pulling-winch construction
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Line construction
- Strap
- Strap length
- 6.0 m (20 ft)
- Carton quantity
- 6 pieces
- Packing dimensions
- 49.5 ×44.5 ×17.5 cm
- Gross /net mass (packing basis to confirm)
- 32 /30 kg
REFERENCE 0321-264
DC pulling-winch configuration — 6000 lb
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 6000 lb
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 294:1
- Cable diameter × length
- 6 mm ×28 m (0.24 inch ×92 ft)
- Drum diameter × length
- 63 mm ×228 mm (2.48×8.98 inch)
- Mounting bolt pattern
- 254×114 mm,4-M10 (10×4.5 inch)
- Layer schedule
- Layer 1: 6000 lb, rope on drum 26.67 ft (8.13 m) ; Layer 2: 5111 lb, rope on drum 57.97 ft (17.67 m) ; Layer 3: 4451 lb, rope on drum 92 ft (28 m)
- Motor data
- 1.9 kW /2.6 HP
- First-layer point at 0 lb
- Listed line speed 13 ft/min (3.96 m/min); current 20 A
- First-layer point at 2000 lb
- Listed line speed 11 ft/min (3.35 m/min); current 160 A
- First-layer point at 4000 lb
- Listed line speed 9 ft/min (2.74 m/min); current 220 A
- First-layer point at 6000 lb
- Listed line speed 6 ft/min (1.83 m/min); current 320 A
REFERENCE 0321-265
DC pulling-winch configuration — 6000 lb
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 6000 lb
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 294:1
- Cable diameter × length
- 6 mm ×28 m (0.24 inch ×92 ft)
- Drum diameter × length
- 63 mm ×228 mm (2.48×8.98 inch)
- Mounting bolt pattern
- 254×114 mm,4-M10 (10×4.5 inch)
- Layer schedule
- Layer 1: 6000 lb, rope on drum 26.67 ft (8.13 m) ; Layer 2: 5111 lb, rope on drum 57.97 ft (17.67 m) ; Layer 3: 4451 lb, rope on drum 92 ft (28 m)
- Motor data
- 2.0 kW /2.7 HP
- First-layer point at 0 lb
- Listed line speed 17 ft/min (5.18 m/min); current 10 A
- First-layer point at 2000 lb
- Listed line speed 13 ft/min (3.96 m/min); current 85 A
- First-layer point at 4000 lb
- Listed line speed 10 ft/min (3.05 m/min); current 120 A
- First-layer point at 6000 lb
- Listed line speed 7 ft/min (2.13 m/min); current 175 A
REFERENCE 0321-266
DC pulling-winch configuration — 8000 lb
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 8000 lb
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 294:1
- Cable diameter × length
- 8 mm ×29 m (0.32 inch ×95 ft)
- Drum diameter × length
- 63 mm ×228 mm (2.48×8.98 inch)
- Mounting bolt pattern
- 254×114 mm,4-M10 (10×4.5 inch)
- Layer schedule
- Layer 1: 8000 lb, rope on drum 20.87 ft (6.36 m) ; Layer 2: 6528 lb, rope on drum 46.42 ft (14.15 m) ; Layer 3: 5514 lb, rope on drum 76.67 ft (23.37 m) ; Layer 4: 4773 lb, rope on drum 95 ft (29 m)
- Motor data
- 2.8 kW /3.8 HP
- First-layer point at 0 lb
- Listed line speed 13 ft/min (3.96 m/min); current 20 A
- First-layer point at 2000 lb
- Listed line speed 11 ft/min (3.35 m/min); current 100 A
- First-layer point at 4000 lb
- Listed line speed 9 ft/min (2.74 m/min); current 150 A
- First-layer point at 6000 lb
- Listed line speed 6 ft/min (1.83 m/min); current 200 A
- First-layer point at 8000 lb
- Listed line speed 4.5 ft/min (1.37 m/min); current 220 A
REFERENCE 0321-267
DC pulling-winch configuration — 8000 lb
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 8000 lb
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 294:1
- Cable diameter × length
- 8 mm ×29 m (0.32 inch ×95 ft)
- Drum diameter × length
- 63 mm ×228 mm (2.48×8.98 inch)
- Mounting bolt pattern
- 254×114 mm,4-M10 (10×4.5 inch)
- Layer schedule
- Layer 1: 8000 lb, rope on drum 20.87 ft (6.36 m) ; Layer 2: 6528 lb, rope on drum 46.42 ft (14.15 m) ; Layer 3: 5514 lb, rope on drum 76.67 ft (23.37 m) ; Layer 4: 4773 lb, rope on drum 95 ft (29 m)
- Motor data
- 3.0 kW /4.1 HP
- First-layer point at 0 lb
- Listed line speed 15 ft/min (4.57 m/min); current 16 A
- First-layer point at 2000 lb
- Listed line speed 13 ft/min (3.96 m/min); current 60 A
- First-layer point at 4000 lb
- Listed line speed 10.5 ft/min (3.2 m/min); current 95 A
- First-layer point at 6000 lb
- Listed line speed 7 ft/min (2.13 m/min); current 125 A
- First-layer point at 8000 lb
- Listed line speed 5 ft/min (1.52 m/min); current 175 A
REFERENCE 0321-268
DC pulling-winch configuration — 8500 lb
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 8500 lb
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 294:1
- Cable diameter × length
- 9.2 mm ×28 m (0.36 inch ×92 ft)
- Drum diameter × length
- 63 mm ×228 mm (2.48×8.98 inch)
- Mounting bolt pattern
- 254×114 mm,4-M10 (10×4.5 inch)
- Layer schedule
- Layer 1: 8500 lb, rope on drum 18.24 ft (5.56 m) ; Layer 2: 6773 lb, rope on drum 41.11 ft (12.53 m) ; Layer 3: 5630 lb, rope on drum 68.63 ft (20.92 m) ; Layer 4: 4817 lb, rope on drum 92 ft (28 m)
- Motor data
- 3.0 kW /4.1 HP
- First-layer point at 0 lb
- Listed line speed 13 ft/min (3.96 m/min); current 30 A
- First-layer point at 2000 lb
- Listed line speed 11 ft/min (3.35 m/min); current 120 A
- First-layer point at 4000 lb
- Listed line speed 9 ft/min (2.74 m/min); current 180 A
- First-layer point at 6000 lb
- Listed line speed 6 ft/min (1.83 m/min); current 230 A
- First-layer point at 8500 lb
- Listed line speed 5 ft/min (1.52 m/min); current 350 A
REFERENCE 0321-269
DC pulling-winch configuration — 8500 lb
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 8500 lb
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 294:1
- Cable diameter × length
- 9.2 mm ×28 m (0.36 inch ×92 ft)
- Drum diameter × length
- 63 mm ×228 mm (2.48×8.98 inch)
- Mounting bolt pattern
- 254×114 mm,4-M10 (10×4.5 inch)
- Layer schedule
- Layer 1: 8500 lb, rope on drum 18.24 ft (5.56 m) ; Layer 2: 6773 lb, rope on drum 41.11 ft (12.53 m) ; Layer 3: 5630 lb, rope on drum 68.63 ft (20.92 m) ; Layer 4: 4817 lb, rope on drum 92 ft (28 m)
- Motor data
- 3.2 kW /4.35 HP
- First-layer point at 0 lb
- Listed line speed 15 ft/min (4.57 m/min); current 16 A
- First-layer point at 2000 lb
- Listed line speed 13 ft/min (3.96 m/min); current 60 A
- First-layer point at 4000 lb
- Listed line speed 10.5 ft/min (3.2 m/min); current 95 A
- First-layer point at 6000 lb
- Listed line speed 7 ft/min (2.13 m/min); current 125 A
- First-layer point at 8500 lb
- Listed line speed 6 ft/min (1.83 m/min); current 185 A
REFERENCE 0321-270
DC pulling-winch configuration — 9000 lb
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 9000 lb
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 294:1
- Cable diameter × length
- 9.2 mm ×28 m (0.36 inch ×92 ft)
- Drum diameter × length
- 63 mm ×228 mm (2.48×8.98 inch)
- Mounting bolt pattern
- 254×114 mm,4-M10 (10×4.5 inch)
- Layer schedule
- Layer 1: 9000 lb, rope on drum 18.24 ft (5.56 m) ; Layer 2: 7172 lb, rope on drum 41.11 ft (12.53 m) ; Layer 3: 5961 lb, rope on drum 68.63 ft (20.92 m) ; Layer 4: 5100 lb, rope on drum 92 ft (28 m)
- Motor data
- 3.5 kW /4.8 HP
- First-layer point at 0 lb
- Listed line speed 13 ft/min (3.96 m/min); current 32 A
- First-layer point at 2000 lb
- Listed line speed 11 ft/min (3.35 m/min); current 120 A
- First-layer point at 4000 lb
- Listed line speed 9 ft/min (2.74 m/min); current 180 A
- First-layer point at 6000 lb
- Listed line speed 6 ft/min (1.83 m/min); current 230 A
- First-layer point at 9000 lb
- Listed line speed 4.5 ft/min (1.37 m/min); current 380 A
REFERENCE 0321-271
DC pulling-winch configuration — 9000 lb
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 9000 lb
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 294:1
- Cable diameter × length
- 9.2 mm ×28 m (0.36 inch ×92 ft)
- Drum diameter × length
- 63 mm ×228 mm (2.48×8.98 inch)
- Mounting bolt pattern
- 254×114 mm,4-M10 (10×4.5 inch)
- Layer schedule
- Layer 1: 9000 lb, rope on drum 18.24 ft (5.56 m) ; Layer 2: 7172 lb, rope on drum 41.11 ft (12.53 m) ; Layer 3: 5961 lb, rope on drum 68.63 ft (20.92 m) ; Layer 4: 5100 lb, rope on drum 92 ft (28 m)
- Motor data
- 3.7 kW /5.0 HP
- First-layer point at 0 lb
- Listed line speed 15 ft/min (4.57 m/min); current 18 A
- First-layer point at 2000 lb
- Listed line speed 13 ft/min (3.96 m/min); current 60 A
- First-layer point at 4000 lb
- Listed line speed 10.5 ft/min (3.2 m/min); current 95 A
- First-layer point at 6000 lb
- Listed line speed 7 ft/min (2.13 m/min); current 125 A
- First-layer point at 9000 lb
- Listed line speed 5 ft/min (1.52 m/min); current 205 A
REFERENCE 0321-272
Heavy DC pulling-winch reference — 10000 lb
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 10000 lb
- Supply configurations
- 12 V DC or24 V DC, series-wound motor; exact motor-output data to confirm
- Gear reduction ratio
- 265:1
- Cable
- 9.2 mm ×28 m (0.36 inch ×92 ft)
- Mounting bolt pattern
- 254×114 mm,4-M10
- Layer schedule
- Layer 1: 10000 lb (4545 kg as listed); rope 16.67 ft (5.08 m) ; Layer 2: 7969 lb (3622 kg as listed); rope 37.8 ft (11.52 m) ; Layer 3: 6623 lb (3010 kg as listed); rope 63.32 ft (19.3 m) ; Layer 4: 5667 lb (2576 kg as listed); rope 92 ft (28 m)
- First-layer source point 0 lb
- 25.5 ft/min (7.75 m/min as listed); test supply not independently identified
- First-layer source point 2000 lb
- 14.9 ft/min (4.55 m/min as listed); test supply not independently identified
- First-layer source point 6000 lb
- 8.8 ft/min (2.7 m/min as listed); test supply not independently identified
- First-layer source point 8000 lb
- 7 ft/min (2.15 m/min as listed); test supply not independently identified
- First-layer source point 10000 lb
- 5.9 ft/min (1.8 m/min as listed); test supply not independently identified
REFERENCE 0321-273
Heavy DC pulling-winch reference — 12000 lb
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 12000 lb
- Supply configurations
- 12 V DC or24 V DC, series-wound motor; exact motor-output data to confirm
- Gear reduction ratio
- 265:1
- Cable
- 9.2 mm ×28 m (0.36 inch ×92 ft)
- Mounting bolt pattern
- 254×114 mm,4-M12
- Layer schedule
- Layer 1: 12000 lb (5454 kg as listed); rope 16.67 ft (5.08 m) ; Layer 2: 9485 lb (4311 kg as listed); rope 37.8 ft (11.52 m) ; Layer 3: 7842 lb (3564 kg as listed); rope 63.32 ft (19.3 m) ; Layer 4: 6684 lb (3038 kg as listed); rope 92 ft (28 m)
- First-layer source point 0 lb
- 21.3 ft/min (6.5 m/min as listed); test supply not independently identified
- First-layer source point 6000 lb
- 7.9 ft/min (2.4 m/min as listed); test supply not independently identified
- First-layer source point 8000 lb
- 6.5 ft/min (2 m/min as listed); test supply not independently identified
- First-layer source point 10000 lb
- 5.8 ft/min (1.75 m/min as listed); test supply not independently identified
- First-layer source point 12000 lb
- 4.4 ft/min (1.35 m/min as listed); test supply not independently identified
REFERENCE 0321-274
Strap-equipped DC pulling-winch reference — 0.6 kW /0.8 HP
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated pull
- 1000 lb (454 kg as listed)
- Supply
- 12 V DC
- Motor rating
- 0.6 kW /0.8 HP
- Gear reduction ratio
- 153:1
- Strap width
- 25 mm (0.98 inch)
- Drum diameter ×length
- 38 ×28 mm (1.5×1.1 inches)
- No-load first-layer speed/current
- 13 ft/min (4.0 m/min as listed),2 A
- Full-pull first-layer speed/current
- 3.3 ft/min (1.0 m/min as listed),50 A
REFERENCE 0321-275
DC pulling-winch configuration — 2000 lb (909 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 2000 lb (909 kg as listed)
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 153:1
- Cable diameter × length
- 4.8 mm ×7.6 m (0.19 inch ×25 ft)
- Drum diameter × length
- 32 mm ×73 mm (1.26×2.87 inch)
- Layer schedule
- Layer 1: 2000 lb (909 kg as listed), rope on drum 5.5 ft (1.68 m) ; Layer 2: 1586 lb (721 kg as listed), rope on drum 12.43 ft (3.79 m) ; Layer 3: 1314 lb (597 kg as listed), rope on drum 20.8 ft (6.34 m) ; Layer 4: 1121 lb (509 kg as listed), rope on drum 25 ft (7.6 m)
- Motor data
- 0.8 kW /1.1 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 14 ft/min (4.26 m/min); current 8 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 10 ft/min (3.05 m/min); current 35 A
- First-layer point at 1500 lb (682 kg as listed)
- Listed line speed 8 ft/min (2.44 m/min); current 58 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 4 ft/min (1.22 m/min); current 85 A
REFERENCE 0321-276
DC pulling-winch configuration — 2000 lb (909 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 2000 lb (909 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 153:1
- Cable diameter × length
- 4.8 mm ×7.6 m (0.19 inch ×25 ft)
- Drum diameter × length
- 32 mm ×73 mm (1.26×2.87 inch)
- Layer schedule
- Layer 1: 2000 lb (909 kg as listed), rope on drum 5.5 ft (1.68 m) ; Layer 2: 1586 lb (721 kg as listed), rope on drum 12.43 ft (3.79 m) ; Layer 3: 1314 lb (597 kg as listed), rope on drum 20.8 ft (6.34 m) ; Layer 4: 1121 lb (509 kg as listed), rope on drum 25 ft (7.6 m)
- Motor data
- 0.9 kW /1.2 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 15.5 ft/min (4.72 m/min); current 5 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 11 ft/min (3.35 m/min); current 20 A
- First-layer point at 1500 lb (682 kg as listed)
- Listed line speed 9 ft/min (2.74 m/min); current 35 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 5 ft/min (1.52 m/min); current 45 A
REFERENCE 0321-277
DC pulling-winch dimensional reference
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Overall L×W reference
- 332 ×110 mm
- Drawing overall height
- 154 mm
- Drum diameter ×length
- 32 ×73 mm
REFERENCE 0321-278
AC wire-rope lifting configuration — 100 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 450 W
- Rated lifting load
- 100 kg
- Lifting speed
- 10 m/min
- Lifting height
- 18 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Listed gross /net mass
- 24/22 kg
REFERENCE 0321-279
AC wire-rope lifting configuration — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 450 W
- Rated lifting load
- 200 kg
- Lifting speed
- 5 m/min
- Lifting height
- 9 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Listed gross /net mass
- 24/22 kg
REFERENCE 0321-280
AC wire-rope lifting configuration — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 500 W
- Rated lifting load
- 125 kg
- Lifting speed
- 10 m/min
- Lifting height
- 18 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Listed gross /net mass
- 25/23 kg
REFERENCE 0321-281
AC wire-rope lifting configuration — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 500 W
- Rated lifting load
- 250 kg
- Lifting speed
- 5 m/min
- Lifting height
- 9 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Listed gross /net mass
- 25/23 kg
REFERENCE 0321-282
AC wire-rope lifting configuration — 150 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 550 W
- Rated lifting load
- 150 kg
- Lifting speed
- 10 m/min
- Lifting height
- 18 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Listed gross /net mass
- 26/24 kg
REFERENCE 0321-283
AC wire-rope lifting configuration — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 550 W
- Rated lifting load
- 300 kg
- Lifting speed
- 5 m/min
- Lifting height
- 9 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Listed gross /net mass
- 26/24 kg
REFERENCE 0321-284
AC wire-rope lifting configuration — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 750 W
- Rated lifting load
- 200 kg
- Lifting speed
- 10 m/min
- Lifting height
- 18 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×41×17 cm
- Listed gross /net mass
- 35/33 kg
REFERENCE 0321-285
AC wire-rope lifting configuration — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 750 W
- Rated lifting load
- 400 kg
- Lifting speed
- 5 m/min
- Lifting height
- 9 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×41×17 cm
- Listed gross /net mass
- 35/33 kg
REFERENCE 0321-286
AC wire-rope lifting configuration — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 900 W
- Rated lifting load
- 250 kg
- Lifting speed
- 10 m/min
- Lifting height
- 18 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×41×17 cm
- Listed gross /net mass
- 36/34 kg
REFERENCE 0321-287
AC wire-rope lifting configuration — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 900 W
- Rated lifting load
- 500 kg
- Lifting speed
- 5 m/min
- Lifting height
- 9 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×41×17 cm
- Listed gross /net mass
- 36/34 kg
REFERENCE 0321-288
AC wire-rope lifting configuration — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 1050 W
- Rated lifting load
- 300 kg
- Lifting speed
- 10 m/min
- Lifting height
- 18 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×41×17 cm
- Listed gross /net mass
- 38/36 kg
REFERENCE 0321-289
AC wire-rope lifting configuration — 600 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 1050 W
- Rated lifting load
- 600 kg
- Lifting speed
- 5 m/min
- Lifting height
- 9 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×41×17 cm
- Listed gross /net mass
- 38/36 kg
REFERENCE 0321-290
AC wire-rope lifting configuration — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 1350 W
- Rated lifting load
- 400 kg
- Lifting speed
- 10 m/min
- Lifting height
- 18 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×44×17 cm
- Listed gross /net mass
- 40/38 kg
REFERENCE 0321-291
AC wire-rope lifting configuration — 800 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 1350 W
- Rated lifting load
- 800 kg
- Lifting speed
- 5 m/min
- Lifting height
- 9 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×44×17 cm
- Listed gross /net mass
- 40/38 kg
REFERENCE 0321-292
AC wire-rope lifting configuration — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 1600 W
- Rated lifting load
- 500 kg
- Lifting speed
- 10 m/min
- Lifting height
- 18 m
- Packing quantity
- 1 piece
- Packing dimensions
- 56×24×33 cm
- Listed gross /net mass
- 36/34 kg
REFERENCE 0321-293
AC wire-rope lifting configuration — 999 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 1600 W
- Rated lifting load
- 999 kg
- Lifting speed
- 5 m/min
- Lifting height
- 9 m
- Packing quantity
- 1 piece
- Packing dimensions
- 56×24×33 cm
- Listed gross /net mass
- 36/34 kg
REFERENCE 0321-294
Compact wire-rope lifting configuration — 100 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 V AC /50 Hz
- Input power
- 450 W
- Rated lifting load
- 100 kg
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Packing quantity
- 1 piece
- Packing dimensions
- 42×28.5×28.5 cm
- Listed net mass
- 13 kg
REFERENCE 0321-295
Compact wire-rope lifting configuration — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 V AC /50 Hz
- Input power
- 450 W
- Rated lifting load
- 200 kg
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Packing quantity
- 1 piece
- Packing dimensions
- 42×28.5×28.5 cm
- Listed net mass
- 13 kg
REFERENCE 0321-296
Compact wire-rope lifting configuration — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 V AC /50 Hz
- Input power
- 500 W
- Rated lifting load
- 125 kg
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Packing quantity
- 1 piece
- Packing dimensions
- 42×28.5×28.5 cm
- Listed net mass
- 13.5 kg
REFERENCE 0321-297
Compact wire-rope lifting configuration — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 V AC /50 Hz
- Input power
- 500 W
- Rated lifting load
- 250 kg
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Packing quantity
- 1 piece
- Packing dimensions
- 42×28.5×28.5 cm
- Listed net mass
- 13.5 kg
REFERENCE 0321-298
Compact wire-rope lifting configuration — 150 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 V AC /50 Hz
- Input power
- 550 W
- Rated lifting load
- 150 kg
- Lifting speed
- 8 m/min
- Lifting height
- 12 m
- Packing quantity
- 1 piece
- Packing dimensions
- 42×28.5×28.5 cm
- Listed net mass
- 14 kg
REFERENCE 0321-299
Compact wire-rope lifting configuration — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 V AC /50 Hz
- Input power
- 550 W
- Rated lifting load
- 300 kg
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Packing quantity
- 1 piece
- Packing dimensions
- 42×28.5×28.5 cm
- Listed net mass
- 14 kg
REFERENCE 0321-300
Lower-speed wire-rope lifting configuration — 150 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 400 W
- Rated lifting load
- 150 kg
- Lifting speed
- 5 m/min
- Lifting height
- 12 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Listed gross /net mass
- 24/22 kg
REFERENCE 0321-301
Lower-speed wire-rope lifting configuration — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 400 W
- Rated lifting load
- 300 kg
- Lifting speed
- 2.5 m/min
- Lifting height
- 6 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Listed gross /net mass
- 24/22 kg
REFERENCE 0321-302
Lower-speed wire-rope lifting configuration — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 450 W
- Rated lifting load
- 200 kg
- Lifting speed
- 5 m/min
- Lifting height
- 12 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Listed gross /net mass
- 25/23 kg
REFERENCE 0321-303
Lower-speed wire-rope lifting configuration — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 450 W
- Rated lifting load
- 400 kg
- Lifting speed
- 2.5 m/min
- Lifting height
- 6 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Listed gross /net mass
- 25/23 kg
REFERENCE 0321-304
Lower-speed wire-rope lifting configuration — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 500 W
- Rated lifting load
- 250 kg
- Lifting speed
- 5 m/min
- Lifting height
- 12 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Listed gross /net mass
- 26/24 kg
REFERENCE 0321-305
Lower-speed wire-rope lifting configuration — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 500 W
- Rated lifting load
- 500 kg
- Lifting speed
- 2.5 m/min
- Lifting height
- 6 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Listed gross /net mass
- 26/24 kg
REFERENCE 0321-306
Lower-speed wire-rope lifting configuration — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 550 W
- Rated lifting load
- 300 kg
- Lifting speed
- 5 m/min
- Lifting height
- 12 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Listed gross /net mass
- 27/25 kg
REFERENCE 0321-307
Lower-speed wire-rope lifting configuration — 600 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 550 W
- Rated lifting load
- 600 kg
- Lifting speed
- 2.5 m/min
- Lifting height
- 6 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 46×36×16 cm
- Listed gross /net mass
- 27/25 kg
REFERENCE 0321-308
Lower-speed wire-rope lifting configuration — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 750 W
- Rated lifting load
- 400 kg
- Lifting speed
- 5 m/min
- Lifting height
- 12 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×39×18 cm
- Listed gross /net mass
- 34/32 kg
REFERENCE 0321-309
Lower-speed wire-rope lifting configuration — 800 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 750 W
- Rated lifting load
- 800 kg
- Lifting speed
- 2.5 m/min
- Lifting height
- 6 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×39×18 cm
- Listed gross /net mass
- 34/32 kg
REFERENCE 0321-310
Lower-speed wire-rope lifting configuration — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 900 W
- Rated lifting load
- 500 kg
- Lifting speed
- 5 m/min
- Lifting height
- 12 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×44×17 cm
- Listed gross /net mass
- 36/34 kg
REFERENCE 0321-311
Lower-speed wire-rope lifting configuration — 999 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 900 W
- Rated lifting load
- 999 kg
- Lifting speed
- 2.5 m/min
- Lifting height
- 6 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×44×17 cm
- Listed gross /net mass
- 36/34 kg
REFERENCE 0321-312
Higher-speed wire-rope lifting configuration — 100 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 750 W
- Rated lifting load
- 100 kg
- Lifting speed
- 21 m/min
- Lifting height
- 25 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×44×17 cm
- Listed gross /net mass
- 36/34 kg
REFERENCE 0321-313
Higher-speed wire-rope lifting configuration — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 750 W
- Rated lifting load
- 200 kg
- Lifting speed
- 10.5 m/min
- Lifting height
- 12.5 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×44×17 cm
- Listed gross /net mass
- 36/34 kg
REFERENCE 0321-314
Higher-speed wire-rope lifting configuration — 125 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 900 W
- Rated lifting load
- 125 kg
- Lifting speed
- 21 m/min
- Lifting height
- 25 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×44×17 cm
- Listed gross /net mass
- 38/36 kg
REFERENCE 0321-315
Higher-speed wire-rope lifting configuration — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 900 W
- Rated lifting load
- 250 kg
- Lifting speed
- 10.5 m/min
- Lifting height
- 12.5 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×44×17 cm
- Listed gross /net mass
- 38/36 kg
REFERENCE 0321-316
Higher-speed wire-rope lifting configuration — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 1350 W
- Rated lifting load
- 200 kg
- Lifting speed
- 21 m/min
- Lifting height
- 25 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×44×17 cm
- Listed gross /net mass
- 42/40 kg
REFERENCE 0321-317
Higher-speed wire-rope lifting configuration — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 1350 W
- Rated lifting load
- 400 kg
- Lifting speed
- 10.5 m/min
- Lifting height
- 12.5 m
- Packing quantity
- 2 pieces
- Packing dimensions
- 52×44×17 cm
- Listed gross /net mass
- 42/40 kg
REFERENCE 0321-318
Higher-speed wire-rope lifting configuration — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 1600 W
- Rated lifting load
- 250 kg
- Lifting speed
- 21 m/min
- Lifting height
- 25 m
- Packing quantity
- 1 piece
- Packing dimensions
- 56×24×33 cm
- Listed gross /net mass
- 38/36 kg
REFERENCE 0321-319
Higher-speed wire-rope lifting configuration — 500 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 1600 W
- Rated lifting load
- 500 kg
- Lifting speed
- 10.5 m/min
- Lifting height
- 12.5 m
- Packing quantity
- 1 piece
- Packing dimensions
- 56×24×33 cm
- Listed gross /net mass
- 38/36 kg
REFERENCE 0321-320
Higher-speed wire-rope lifting configuration — 300 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed supply
- 220 /230 V
- Input power
- 1800 W
- Rated lifting load
- 300 kg
- Lifting speed
- 21 m/min
- Lifting height
- 25 m
- Packing quantity
- 1 piece
- Packing dimensions
- 56×24×33 cm
- Listed gross /net mass
- 38/36 kg
REFERENCE 0321-321
Higher-speed wire-rope lifting configuration — 600 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed supply
- 220 /230 V
- Input power
- 1800 W
- Rated lifting load
- 600 kg
- Lifting speed
- 10.5 m/min
- Lifting height
- 12.5 m
- Packing quantity
- 1 piece
- Packing dimensions
- 56×24×33 cm
- Listed gross /net mass
- 38/36 kg
REFERENCE 0321-322
Long-travel wire-rope lifting reference — 250 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Listed supply
- 220 V AC /50 Hz
- Input power
- 1300 W
- Rated lifting load
- 250 kg
- Lifting speed
- 15 m/min
- Lifting height
- 60 m
- Wire-rope diameter
- 5.1 mm
- Packing quantity
- 1 piece
- Packing dimensions
- 54 ×29 ×36.5 cm
- Listed net mass
- 32 kg
REFERENCE 0321-323
DC wire-rope lifting configuration — 200 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Single hook
- Listed DC supply options
- 12 /24 V
- Input power
- 400 W
- Rated lifting load
- 200 kg
- Lifting speed
- 4 m/min
- Lifting height
- 6 m
- Wire-rope diameter
- 3.8 mm
- Packing quantity
- 1 piece
- Packing dimensions
- 38 ×14.5 ×21 cm
- Listed net mass
- 11 kg
REFERENCE 0321-324
DC wire-rope lifting configuration — 400 kg
Match the lifting load, hook arrangement, travel, speed, voltage and working duty as one configuration. Confirm cable or chain, brake, mounting, controls and the current packing specification.
- Hook arrangement
- Double hook
- Listed DC supply options
- 12 /24 V
- Input power
- 400 W
- Rated lifting load
- 400 kg
- Lifting speed
- 2 m/min
- Lifting height
- 3 m
- Wire-rope diameter
- 3.8 mm
- Packing quantity
- 1 piece
- Packing dimensions
- 38 ×14.5 ×21 cm
- Listed net mass
- 11 kg
REFERENCE 0321-325
DC pulling-winch configuration — 5000 lb (2272 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 5000 lb (2272 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 294:1
- Cable diameter × length
- 6.0 mm ×24 m (0.24 inch ×79 ft)
- Drum diameter × length
- 63 mm ×140 mm (2.48 ×5.5 inches)
- Mounting bolt pattern
- 165×114 mm;4-M10 (6.5×4.5 inches)
- Layer schedule
- Layer 1: 5000 lb (2272 kg as listed), rope on drum 15.98 ft (4.87 m) ; Layer 2: 4259 lb (1936 kg as listed), rope on drum 34.78 ft (10.6 m) ; Layer 3: 3709 lb (1686 kg as listed), rope on drum 56.43 ft (17.2 m) ; Layer 4: 3285 lb (1493 kg as listed), rope on drum 79 ft (24 m)
- Motor data
- 1.8 kW /2.45 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 17 ft/min (5.18 m/min); current 10 A
- First-layer point at 1000 lb (454 kg as listed)
- Listed line speed 13 ft/min (3.96 m/min); current 55 A
- First-layer point at 3000 lb (1363 kg as listed)
- Listed line speed 10 ft/min (3.05 m/min); current 110 A
- First-layer point at 5000 lb (2272 kg as listed)
- Listed line speed 6 ft/min (1.83 m/min); current 150 A
REFERENCE 0321-326
DC pulling-winch configuration — 8000 lb (3636 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 8000 lb (3636 kg as listed)
- Supply configuration
- 12 V DC
- Gear reduction ratio
- 294:1
- Cable diameter × length
- 8 mm ×29 m (0.32 inch ×95 ft)
- Drum diameter × length
- 63 mm ×228 mm (2.48×8.98 inch)
- Mounting bolt pattern
- 254×114 mm,4-M10 (10×4.5 inch)
- Layer schedule
- Layer 1: 8000 lb (3636 kg as listed), rope on drum 20.87 ft (6.36 m) ; Layer 2: 6528 lb (2967 kg as listed), rope on drum 46.42 ft (14.15 m) ; Layer 3: 5514 lb (2506 kg as listed), rope on drum 76.67 ft (23.37 m) ; Layer 4: 4773 lb (2169 kg as listed), rope on drum 95 ft (29 m)
- Motor data
- 2.8 kW /3.8 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 13 ft/min (3.96 m/min); current 25 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 11 ft/min (3.35 m/min); current 120 A
- First-layer point at 4000 lb (1818 kg as listed)
- Listed line speed 9 ft/min (2.74 m/min); current 180 A
- First-layer point at 6000 lb (2727 kg as listed)
- Listed line speed 6 ft/min (1.83 m/min); current 240 A
- First-layer point at 8000 lb (3636 kg as listed)
- Listed line speed 4.5 ft/min (1.37 m/min); current 325 A
REFERENCE 0321-327
DC pulling-winch configuration — 8000 lb (3636 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 8000 lb (3636 kg as listed)
- Supply configuration
- 24 V DC
- Gear reduction ratio
- 294:1
- Cable diameter × length
- 8 mm ×29 m (0.32 inch ×95 ft)
- Drum diameter × length
- 63 mm ×228 mm (2.48×8.98 inch)
- Mounting bolt pattern
- 254×114 mm,4-M10 (10×4.5 inch)
- Layer schedule
- Layer 1: 8000 lb (3636 kg as listed), rope on drum 20.87 ft (6.36 m) ; Layer 2: 6528 lb (2967 kg as listed), rope on drum 46.42 ft (14.15 m) ; Layer 3: 5514 lb (2506 kg as listed), rope on drum 76.67 ft (23.37 m) ; Layer 4: 4773 lb (2169 kg as listed), rope on drum 95 ft (29 m)
- Motor data
- 3.0 kW /4.1 HP
- First-layer point at 0 lb (0 kg as listed)
- Listed line speed 15 ft/min (4.57 m/min); current 14 A
- First-layer point at 2000 lb (909 kg as listed)
- Listed line speed 13 ft/min (3.96 m/min); current 60 A
- First-layer point at 4000 lb (1818 kg as listed)
- Listed line speed 10.5 ft/min (3.2 m/min); current 95 A
- First-layer point at 6000 lb (2727 kg as listed)
- Listed line speed 7 ft/min (2.13 m/min); current 125 A
- First-layer point at 8000 lb (3636 kg as listed)
- Listed line speed 5 ft/min (1.52 m/min); current 175 A
REFERENCE 0321-328
Single-supply heavy pulling-winch configuration — 10000 lb (4545 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 10000 lb (4545 kg as listed)
- Supply
- 12 V DC
- Motor data
- 4.4 kW /6.0 HP,series wound
- Gear reduction ratio
- 294:1
- Cable diameter ×length
- 9.2 mm ×28 m (0.36 inch ×92 ft)
- Drum diameter ×length
- 63 mm ×228 mm (2.48×8.98 inch)
- Mounting pattern
- 254×114 mm,4-M10
- Layer schedule
- Layer 1: 10000 lb (4545 kg as listed); rope 18 ft (5.5 m) ; Layer 2: 7969 lb (3622 kg as listed); rope 41 ft (12.5 m) ; Layer 3: 6623 lb (3010 kg as listed); rope 68.5 ft (20.9 m) ; Layer 4: 5667 lb (2576 kg as listed); rope 92 ft (28 m)
- First-layer point 0 lb (0 kg as listed)
- 19.45 ft/min (5.93 m/min as listed), 50 A
- First-layer point 3000 lb (1363 kg as listed)
- 17.45 ft/min (5.32 m/min as listed), 130 A
- First-layer point 6000 lb (2727 kg as listed)
- 15.45 ft/min (4.71 m/min as listed), 200 A
- First-layer point 8000 lb (3636 kg as listed)
- 12.46 ft/min (3.8 m/min as listed), 270 A
- First-layer point 10000 lb (4545 kg as listed)
- 10.5 ft/min (3.2 m/min as listed), 320 A
REFERENCE 0321-329
Single-supply heavy pulling-winch configuration — 12000 lb (5454 kg as listed)
Compare line pull by rope layer, cable or strap, motor supply, mounting and duty. Load-point speed and current apply to their stated configuration; line pull is separate from suspended lifting capacity.
- Rated first-layer line pull
- 12000 lb (5454 kg as listed)
- Supply
- 12 V DC
- Motor data
- 5.0 kW /6.8 HP,series wound
- Gear reduction ratio
- 402:1
- Cable diameter ×length
- 11 mm ×28 m (0.43 inch ×92 ft)
- Drum diameter ×length
- 72 mm ×218 mm (2.83×8.58 inch)
- Mounting pattern
- 254×114 mm,4-M12
- Layer schedule
- Layer 1: 12000 lb (5454 kg as listed); rope 16.67 ft (5.08 m) ; Layer 2: 9485 lb (4311 kg as listed); rope 37.8 ft (11.52 m) ; Layer 3: 7842 lb (3564 kg as listed); rope 63.32 ft (19.3 m) ; Layer 4: 6684 lb (3038 kg as listed); rope 92 ft (28 m)
- First-layer point 0 lb (0 kg as listed)
- 15 ft/min (4.57 m/min as listed), 65 A
- First-layer point 6000 lb (2727 kg as listed)
- 10 ft/min (3.05 m/min as listed), 320 A
- First-layer point 8000 lb (3636 kg as listed)
- 8.2 ft/min (2.5 m/min as listed), 420 A
- First-layer point 10000 lb (4545 kg as listed)
- 6 ft/min (1.83 m/min as listed), 500 A
- First-layer point 12000 lb (5454 kg as listed)
- 5.6 ft/min (1.71 m/min as listed), 520 A
REFERENCE 0321-330
Drum-equipped marine windlass reference — 400 /880 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1200 W
- Supply
- 12 V
- Listed current draw
- 85 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 8 mm /5/16 inch or 10 mm /3/8 inch chain/rope alternatives
- Maximum working-load reference
- 400 /880 kg /lb as listed
- Maximum power-pull reference
- 1100 /2420 kg /lb as listed
- Listed equipment mass
- 21.3 /47 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 10 /6.2 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-331
Drum-equipped marine windlass reference — 485 /1067 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1500 W
- Supply
- 12 V
- Listed current draw
- 115 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 8 mm /5/16 inch or 10 mm /3/8 inch chain/rope alternatives
- Maximum working-load reference
- 485 /1067 kg /lb as listed
- Maximum power-pull reference
- 1200 /2640 kg /lb as listed
- Listed equipment mass
- 21.3 /47 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 10 /6.2 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-332
Drum-equipped marine windlass reference — 485 /1067 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1500 W
- Supply
- 24 V
- Listed current draw
- 65 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 8 mm /5/16 inch or 10 mm /3/8 inch chain/rope alternatives
- Maximum working-load reference
- 485 /1067 kg /lb as listed
- Maximum power-pull reference
- 1200 /2640 kg /lb as listed
- Listed equipment mass
- 21.3 /47 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 10 /6.2 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-333
Drum-equipped marine windlass reference — 700 /1540 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1800 W
- Supply
- 12 V
- Listed current draw
- 130 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 8 mm /5/16 inch or 10 mm /3/8 inch chain/rope alternatives
- Maximum working-load reference
- 700 /1540 kg /lb as listed
- Maximum power-pull reference
- 2100 /4620 kg /lb as listed
- Listed equipment mass
- 22.2 /48.8 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 10 /6.2 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-334
Round marine windlass reference — 1200 W
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1200 W
- Supply
- 12 V
- Listed current draw
- 85 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 8 mm /5/16 inch or 10 mm /3/8 inch chain alternatives
- Maximum power-pull reference
- 1100 /2420 kg /lb as listed
- Listed equipment mass
- 17.8 /39.3 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 10.3 /4.04 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-335
Round marine windlass reference — 485 /1067 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1500 W
- Supply
- 12 V
- Listed current draw
- 115 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 8 mm /5/16 inch or 10 mm /3/8 inch chain alternatives
- Maximum working-load reference
- 485 /1067 kg /lb as listed
- Maximum power-pull reference
- 1200 /2640 kg /lb as listed
- Listed equipment mass
- 17.8 /39.3 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 10.3 /4.04 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-336
Round marine windlass reference — 485 /1067 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1500 W
- Supply
- 24 V
- Listed current draw
- 65 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 8 mm /5/16 inch or 10 mm /3/8 inch chain alternatives
- Maximum working-load reference
- 485 /1067 kg /lb as listed
- Maximum power-pull reference
- 1200 /2640 kg /lb as listed
- Listed equipment mass
- 17.8 /39.3 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 10.3 /4.04 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-337
Marine windlass with separate drum — 400 /880 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1200 W
- Supply
- 12 V
- Listed current draw
- 85 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 8 mm /5/16 inch or 10 mm /3/8 inch chain alternatives
- Maximum working-load reference
- 400 /880 kg /lb as listed
- Maximum power-pull reference
- 1100 /2420 kg /lb as listed
- Listed equipment mass
- 19.4 /42.8 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 10.3 /6.2 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-338
Marine windlass with separate drum — 485 /1067 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1500 W
- Supply
- 12 V
- Listed current draw
- 115 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 8 mm /5/16 inch or 10 mm /3/8 inch chain alternatives
- Maximum working-load reference
- 485 /1067 kg /lb as listed
- Maximum power-pull reference
- 1200 /2640 kg /lb as listed
- Listed equipment mass
- 19.4 /42.8 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 10.3 /6.2 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-339
Marine windlass with separate drum — 485 /1067 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 1500 W
- Supply
- 24 V
- Listed current draw
- 65 A
- Listed chain-drop speed
- 40 /131 m/min /ft/min as listed
- Gypsy/line alternatives
- 8 mm /5/16 inch or 10 mm /3/8 inch chain alternatives
- Maximum working-load reference
- 485 /1067 kg /lb as listed
- Maximum power-pull reference
- 1200 /2640 kg /lb as listed
- Listed equipment mass
- 19.4 /42.8 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 10.3 /6.2 /5.59 /12
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-340
Higher-output marine chain-windlass reference — 900 /1980 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 2500 W
- Supply
- 24 V
- Listed current draw
- 100 A
- Listed chain-drop speed
- 35 /115 m/min /ft/min as listed
- Gypsy/line alternatives
- 10 mm /3/8 inch, 12 mm or 13 mm /1/2 inch separate chain options; actual chain wheel to approve
- Maximum working-load reference
- 900 /1980 kg /lb as listed
- Maximum power-pull reference
- 2000 /4400 kg /lb as listed
- Listed equipment mass
- 52 /114.8 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 14.53 /6.22 /7.82 /19.4
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-341
Higher-output marine chain-windlass reference — 900 /1980 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 2500 W
- Supply
- 24 V
- Listed current draw
- 100 A
- Listed chain-drop speed
- 35 /115 m/min /ft/min as listed
- Gypsy/line alternatives
- 10 mm /3/8 inch, 12 mm or 13 mm /1/2 inch separate chain options; actual chain wheel to approve
- Maximum working-load reference
- 900 /1980 kg /lb as listed
- Maximum power-pull reference
- 2000 /4400 kg /lb as listed
- Listed equipment mass
- 57 /125.8 kg /lb as listed
- Labelled drawing dimensions (inches, source order)
- 14.53 /9.25 /7.82 /19.4
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Gearcase installation
- Four mounting directions are listed; approve the selected orientation and clearances
REFERENCE 0321-342
Marine capstan/line-handling configuration — 36 /80 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 900 W
- Supply
- 12 V
- Listed current draw
- 50 A
- Maximum working-load reference
- 36 /80 kg /lb as listed
- Maximum power-pull reference
- 180 /396 kg /lb as listed
- Listed equipment mass
- 8 /18 kg /lb as listed
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Line-speed selection
- Request the actual rope-hauling speed, load and duty test for the selected construction.
- Rope reference
- 0–22 mm (0–7/8 inch as printed); confirm usable minimum diameter, rope construction and grip before selection.
REFERENCE 0321-343
Marine line-handling configuration — 50 /110 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 600 W
- Supply
- 12 V
- Listed current draw
- 60 A
- Maximum working-load reference
- 50 /110 kg /lb as listed
- Maximum power-pull reference
- 150 /330 kg /lb as listed
- Listed equipment mass
- 7.5 /16.5 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch line reference
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Line-speed selection
- Request the actual rope-hauling speed, load and duty test for the selected construction.
REFERENCE 0321-344
Marine line-handling configuration — 80 /176 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 900 W
- Supply
- 12 V
- Listed current draw
- 80 A
- Maximum working-load reference
- 80 /176 kg /lb as listed
- Maximum power-pull reference
- 220 /485 kg /lb as listed
- Listed equipment mass
- 7.5 /16.5 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch line reference
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Line-speed selection
- Request the actual rope-hauling speed, load and duty test for the selected construction.
REFERENCE 0321-345
Marine line-handling configuration — 50 /110 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 600 W
- Supply
- 12 V
- Listed current draw
- 60 A
- Maximum working-load reference
- 50 /110 kg /lb as listed
- Maximum power-pull reference
- 150 /330 kg /lb as listed
- Listed equipment mass
- 7.5 /16.5 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch line reference
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Line-speed selection
- Request the actual rope-hauling speed, load and duty test for the selected construction.
REFERENCE 0321-346
Marine line-handling configuration — 80 /176 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 900 W
- Supply
- 12 V
- Listed current draw
- 80 A
- Maximum working-load reference
- 80 /176 kg /lb as listed
- Maximum power-pull reference
- 220 /485 kg /lb as listed
- Listed equipment mass
- 7.5 /16.5 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch line reference
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
- Line-speed selection
- Request the actual rope-hauling speed, load and duty test for the selected construction.
REFERENCE 0321-347
Low-profile marine windlass reference — 50 /110 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 600 W
- Supply
- 12 V
- Listed current draw
- 60 A
- Listed chain-drop speed
- 10 /33 m/min /ft/min as listed
- Gypsy/line alternatives
- 6 mm chain;7 mm /1/4 inch and 8 mm /5/16 inch separate chain/rope alternatives
- Maximum working-load reference
- 50 /110 kg /lb as listed
- Maximum power-pull reference
- 150 /330 kg /lb as listed
- Listed equipment mass
- 8.5 /18.7 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch or 14 mm /9/16 inch in respective alternative
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
REFERENCE 0321-348
Low-profile marine windlass reference — 80 /176 kg /lb as listed
Select the line-handling construction, motor, chain or rope interface and below-deck clearance for the vessel. Working load, peak pull and drop speed are separate selection references; approve the current installation and electrical plan.
- Motor rating
- 900 W
- Supply
- 12 V
- Listed current draw
- 80 A
- Listed chain-drop speed
- 10 /33 m/min /ft/min as listed
- Gypsy/line alternatives
- 6 mm chain;7 mm /1/4 inch and 8 mm /5/16 inch separate chain/rope alternatives
- Maximum working-load reference
- 80 /176 kg /lb as listed
- Maximum power-pull reference
- 220 /485 kg /lb as listed
- Listed equipment mass
- 8.5 /18.7 kg /lb as listed
- Rope alternatives
- 12 mm /1/2 inch or 14 mm /9/16 inch in respective alternative
- Above-deck component material
- Polished 316 stainless steel specified for above-deck parts; not a whole-unit material claim
- Listed installation envelope
- Deck thickness below 50 mm with adequate under-deck motor/gear space; verify the current installation drawing
REFERENCE 0321-349
Extended-rope hoist drawing reference
Use the dimension codes with the corresponding installation drawing. Approve the current article, fasteners, mounting envelope and load-bearing structure before purchase.
- Drawing A
- 418 mm
- Drawing B
- 147 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper and lower limit devices
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Rope-winding feature
- Reverse-winding prevention device
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-350
Extended-rope hoist drawing reference
Use the dimension codes with the corresponding installation drawing. Approve the current article, fasteners, mounting envelope and load-bearing structure before purchase.
- Drawing A
- 418 mm
- Drawing B
- 147 mm
- Drawing C
- 365 mm
- Drawing D
- 190 mm
- Drawing E
- 100 mm
- Drawing fastener reference F
- 4-M10
- Motor winding
- Copper winding
- Travel limit arrangement
- Upper limit device
- Motor thermal provision
- Thermal protection terminal; complete protection design to approve
- Operator controls
- Emergency-stop switch; current circuit and functional test required
- Article protection-class reference
- IP54; exact configuration and evidence to approve
REFERENCE 0321-351
Chain-hoist configuration
Match hook arrangement, lifting height, speed, supply and duty to the suspended material load. Confirm the selected chain, brake, end limits, mounting and current inspection documents together.
- Listed supply pair
- 120 /230 V
- Listed input-power pair
- 1400 /1100 W
- Listed lifting-speed pair
- 3 /3.2 m/min
- Lifting height
- 3 m
- Chain diameter
- 7.1 mm
- Packing quantity
- 1 piece
- Packing dimensions
- 48.6 ×48.6 ×32 cm
- Listed net mass
- 32.5 kg
Each reference describes a particular construction and operating condition. Confirm the current load chart, loaded speed, supply, duty, rope or chain, brake, mounting and packing before ordering. Nominal or peak pull is separate from suspended lifting capacity.
What matters for this category
A better brief.
A clearer comparison.
Focus the sourcing conversation on the features, materials and production details that make a difference to your product range.
A configuration-led shortlist
Compare hook/load/speed/travel together for lifting, and supply/layer/pull/speed/current together for pulling. This helps avoid an attractive headline rating that does not match the actual job.
Mechanical and electrical interfaces together
Bring beam flange, fixing holes, reach, drum, rope, chain pitch, supply, controls, protection and installation clearances into the same enquiry.
Broader project coordination
Combine the selected equipment with its matched controls, drawings, packing information and document requirements through an independent trading and sourcing service.
Branding, configuration & packaging
Make the product
fit your programme.
Bring artwork, reference samples and a target cost. The available process, minimum quantity, sample charges and development scope are reviewed for the chosen option.
Equipment and control brief
Request feasibility for the required voltage, frequency, plug, control arrangement, rope/chain travel, suspension, finish and private-label requirements. Engineering changes need written approval and sample or drawing review.
Packing and shipment plan
Confirm piece count, gross/net weight basis, carton dimensions, marking, accessories, mounting hardware, spare parts and transport protection for the chosen configuration.
Sample and production approval
Ask for current sample cost, preparation time, inspection scope, specification freeze and production schedule. Sample availability, order quantity and lead time are quoted case by case.
Quality & product evidence
Turn requirements
into checks.
Agree which product characteristics need testing and how the approved sample relates to the bulk order.
Load, brake and motion checks
Request the applicable lifting/pulling load test, brake holding, end-limit, emergency-control and operating checks for the exact article and duty. Test conditions must match the intended use.
Motor and line components
Request relevant motor performance, insulation, current, rope/chain specification and tensile or material records. A document for one motor or component does not approve every finished assembly.
Installation and environment
Review mounting structure, beam/curve geometry, cable routing, deck clearance, corrosion exposure, temperature and the selected protection specification. Confirm destination requirements before release.
Test capability is a starting point for the inspection plan. Request the method, applicable model and results needed for your order.
Documents matched to the order
Ask for evidence
that fits the product.
Tell us which destination, application and document set you require. We coordinate requests for the selected equipment and review the stated scope before quotation or shipment.
State the sales market, intended users and required files in your first enquiry. Current validity and scope are checked for the selected supplier and product; a category description does not certify every item.
Share your document requirements ↗- Technical selection pack
- Current dimensional and installation drawings, permitted load/height or layer chart, electrical diagram, operating limits and matched component schedule.
- Article-specific test evidence
- Request the actual model and scope of load, brake, motor, material and destination compliance documents. Check issuer, dates and applicability to the selected configuration.
- Commercial and packing records
- Quotation scope, sample approval, accessories and spares list, packing list, carton/weight basis, marking instructions and shipment documentation.
Built around how you sell
Different buyers.
Different specifications.
Your sales channel changes the assortment, packaging and quality priorities. Tell us the intended use as well as the product name.
Workshops and material lifting
For specified material loads and approved mounting structures, compare chain/rope lifting, trolleys, travel and controls as a complete installation brief.
Pulling and recovery projects
For the stated route, duty and load condition, compare electric or manual pulling, drum layers, line type, anchorage and current demand.
Vessel line and anchor projects
For the actual vessel and installation, compare deck and below-deck space, chain/rope compatibility, windlass or capstan construction, controls and electrical protection.
From first brief to a defined order
One contact.
A practical next step.
Samples, commercial terms and responsibilities are agreed for the project. Use the same product and packing specification when comparing quotations.
Share the requirement
Product, reference image, quantity, sales market and timing.
Compare suitable options
Review configuration, materials, sample scope and relevant documents.
Approve the specification
Agree artwork, packaging, sample, testing and inspection criteria.
Confirm the order plan
Set price, payment, production, delivery and defect remedies in writing.
Buyer questions
Before you send
your first enquiry.
Practical answers about this sourcing direction, customization and the reference options. Your agreed specification and written quotation determine the actual order.
Can one rating cover lifting and pulling?
They are different duties. State whether the equipment suspends a material load, pulls a line, moves a trolley or handles an anchor/rope. Selection requires the relevant load, mounting and operating information.
How should single and double hooks be compared?
Keep the load, speed, lifting height and reeving in the same configuration. A double-hook rating cannot be combined with the single-hook speed or travel without explicit approval.
Why does a winch list different rope-layer pulls?
Effective drum radius changes as rope builds up. Use the pull and rope-on-drum reference for the stated layer; first-layer speed/current points must remain with their supply and load condition.
What electrical details are needed?
Provide voltage, AC/DC, frequency, phase if applicable, available starting/current capacity, plug, controls and cable length. Select the actual motor winding and protection; a slash-listed voltage does not automatically mean one unit accepts both.
What is needed for trolley or frame selection?
Provide beam flange width and profile, curve radius, fixing/support drawing, reach, load, hoist suspension and the required movement envelope. Mounting or assembly height is separate from lifting travel.
What should a marine enquiry include?
Provide vessel/anchor and line details, chain size and pitch, rope construction, working duty, supply, deck thickness and clearances. Chain-only, rope/chain and capstan arrangements need their own compatibility and installation review.
Can samples, branding and packing be arranged?
Send the requested configuration, quantity, branding and packing brief. We request feasibility, sample terms, tooling if relevant, piece count and the current lead time before proposing an order.
Are certifications and delivery terms universal?
Documents, order quantity, sample terms, warranty scope and lead time depend on the selected article, market and quotation. Request current evidence for the exact configuration rather than relying on a general catalogue claim.
Who handles my enquiry?
Factory Sourcing Hub handles this enquiry as an independent sourcing and trading service. The product route, supplier suitability, sample scope and order responsibilities are agreed for the actual project.
How do I get a price and order minimum?
Send the product reference, quantities per variation, customization and packaging. Prices, minimums, sample charges and delivery dates are confirmed in a current quotation; the page is not a live inventory or price feed.
Can I discuss samples and inspection before ordering?
Yes. State whether you need a reference sample, a customized sample or development work. Agree the sample cost and shipping, approval specification, inspection plan and remedy for non-conforming goods before the bulk order.
What should I attach to my email?
Reference images, drawings, logo artwork and a product list are useful. Include quantities, the intended users and sales market, packaging, required documents and timing. After submitting the form, email attachments to kunhuow@gmail.com with your enquiry reference.
Tell us what you are planning
Your next order
starts with a brief.
A reference picture or a short description is enough to begin. Add the details you already know; the optional fields help make the follow-up more useful.
- Application and load: suspended material, pulling, trolley travel or vessel line/anchor handling; load/centre, height, speed, duty and working conditions
- Installation and line: structure/beam/reach, fixing drawing, rope/chain/strap, drum layers, chain pitch, deck thickness and clearances
- Electrical package: selected voltage, AC/DC, frequency/phase, current provision, controls, plugs, cable lengths and protection requirements
- Commercial brief: destination, quantity, sample approval, brand/packing, accessories/spares, required documents and delivery window
Download the enquiry checklist ↓
Independent sourcing and trading service. Supplier choice, service costs and order conditions are discussed for your project.
Discuss your requirements.
Product selection, customization, samples and quotation enquiries.
Explore other sourcing directions
More options for
your product list.
Compare separate product ranges and prepare a brief that fits your assortment.
Tools, Handling & Packaging Equipment Sourcing
Source cutting and garden tools, abrasives, hoses and fittings, handling and lifting equipment, film and coating machinery, inspection lighting and selected vehicle components with specification and export coordination.
Explore this service ↗
Pallet Trucks, Stackers & Lifting Equipment Sourcing
Source pallet trucks, manual and electric stackers, lift tables, drum handlers, powered carts and access equipment with configuration matching, quotation comparison and export coordination.
Explore this service ↗
Tool Switches, Industrial Plugs, Circuit Protection & Motor Controls Sourcing
Source AC/DC tool switches, electromagnetic and equipment controls, motor-control boards, industrial plugs and sockets, portable distribution boxes, circuit breakers, residual-current protection, contactors, starters and domestic wall switches.
Explore this service ↗
Nylon, Polyester, Coated, Printed & Functional Fabric Sourcing
Source nylon and polyester fabric requests, coating and print development, light downwear-shell references, casualwear and womenswear directions, outdoor or marine-cover materials and selected temperature-responsive or conductive textile enquiries.
Explore this service ↗Information basis: published product information reviewed . Reference details support a sourcing discussion. Current supply, samples and product-specific documents are confirmed for the selected item.