Peripheral and self-priming pumps
Compact surface and submersible selections for household water, pressure support and irrigation, with separate jet and deep-well ejector arrangements.
Enquire about this range ↗Water pumps and solar systems Matched to your working duty
Source domestic and industrial water pumps, solar and hybrid pumping systems, drainage and sewage equipment, pressure boosters, pool circulation and garden machinery through one trade enquiry.
Manufacturing, product documents and order conditions depend on the model and supply route selected for your project.
Start with a product reference, intended use and estimated quantity. We bring product selection, sample questions and quotation details into one conversation.
Email your reference image ↗Choose a focused product or discuss a coordinated assortment. Each direction can be developed into a more specific model and packaging brief.
Compact surface and submersible selections for household water, pressure support and irrigation, with separate jet and deep-well ejector arrangements.
Enquire about this range ↗Cast-iron, stainless and semi-open hydraulic constructions support clean-water, light-impurity and equipment duties. Fluid compatibility determines the wet-end selection.
Enquire about this range ↗Centrifugal and peripheral hydraulics use solar-controller matching for off-grid supply, irrigation or tank filling. Specify daily water demand as well as the working duty.
Enquire about this range ↗Alternative AC and DC inputs allow a project to consider grid or generator backup alongside solar supply. Array open-circuit voltage and operating input are separate requirements.
Enquire about this range ↗Stainless-impeller, plastic-impeller and screw constructions cover different well and flow/head requirements; DC-only and hybrid configurations remain distinct.
Enquire about this range ↗Select stages, phase, electrical supply, well diameter and dynamic level. Controlled assemblies and standard pump bodies have different immersion and connection details.
Enquire about this range ↗Individual pumps, tank-mounted units and project booster systems support household and building supply. Pressure controls, standby strategy and available inlet pressure must be agreed.
Enquire about this range ↗Adaptive circulators, fixed-speed ranges and boiler-specific bodies address heating and hot-water integration. Appliance fit, allowable temperature and control wiring require checking.
Enquire about this range ↗For water supply, filtration, RO, ultrafiltration, distillation, cleaning and boiler-feed integration. Liquid chemistry, inlet pressure and system layout define the package.
Enquire about this range ↗Commercial heating, cooling and industrial water loops can use end-suction or vertical in-line layouts with application-specific motor and wet-end choices.
Enquire about this range ↗Plastic and stainless submersibles, rain-barrel pumps and pressure submersibles cover clean or dirty water, with float and automatic-sensing alternatives.
Enquire about this range ↗Battery-driven submersible transfer is an option for garden watering, vessels and temporary drainage; battery protection and pump immersion are separate considerations.
Enquire about this range ↗Small sewage units, pressure-sewage pumps, construction dewatering and slurry hydraulics require separate checks for solids size, fibres, sand, concentration and wear.
Enquire about this range ↗Whirlpool circulation, conventional or solar pool pumps and small decorative-fountain units have different water chemistry, connection and operating requirements.
Enquire about this range ↗Portable engine-driven clean-water, high-head, sewage and trash-pump configurations support sites where electrical supply is unsuitable.
Enquire about this range ↗Vertical, submersible, guide-vane and volute layouts address large-flow drainage, irrigation, water conservancy and cooling-water schemes.
Enquire about this range ↗Double-suction, axial chemical, between-bearing, axially split, overhung and double-casing multistage pumps require project engineering. Hydraulic energy recovery is a separate system option.
Enquire about this range ↗Vertical can-type condensate pumping and cooling-water projects need temperature, NPSH, foundation, shaft and bearing arrangements defined in the enquiry.
Enquire about this range ↗Split-case fire-water and other project pump directions can be reviewed against a designer-defined duty and approval schedule. No blanket fire approval is implied.
Enquire about this range ↗Brushless metal-deck mowers include push and powered-drive directions; cutting width, collection and adjustment needs guide selection.
Enquire about this range ↗Garden equipment includes push or self-propelled mowers, pull or electric starting, mulching/discharge choices and several tiller widths with guarded variants.
Enquire about this range ↗Use these options to describe what you are buying. The public references identify your enquiry; the final model and specification are confirmed before an order.
Compact clean-water transfer for temporary supply, sprinklers and garden irrigation; float-switch variants support automatic operation.
Small domestic pressure boosting with automatic control; select the electrical version and duty point together.
| Power kW | Q m³/h → H m (same curve point) |
|---|---|
| 0.13 | 0.9→12 |
| 0.25 | 1.2→15 |
| 0.37 | 1.2→20 |
| 0.6 | 1.5→20 |
| 0.75 | 1.5→28 |
Clean-water transfer and domestic distribution in a compact surface-pump format.
| Power kW | Q m³/h → H m (same curve point) |
|---|---|
| 0.37 | 1.2→15 |
| 0.75 | 1.5→30 |
Clean-water supply and garden watering; match installation clearance, suction line and priming procedure.
| Power kW | Q m³/h → H m (same curve point) |
|---|---|
| 0.125 | 1.2→10 |
| 0.35 | 1.5→15 |
| 0.55 | 1.5→20 |
| 0.75 | 1.8→25 |
A surface-pump option for water distribution and small irrigation installations.
| Power kW | Q m³/h → H m (same curve point) |
|---|---|
| 0.125 | 1.2→12 |
| 0.35 | 1.5→16 |
| 0.55 | 1.5→20.5 |
A separate clean-water range for comparing power, electrical supply and installation arrangement.
| Power kW | Q m³/h → H m (same curve point) |
|---|---|
| 0.13 | 1.2→7.5 |
| 0.25 | 1.2→11.5 |
| 0.37 | 1.5→13.5 |
| 0.55 | 1.5→22 |
| 0.75 | 1.8→25.5 |
Clean-water transfer where a compact pump and modest flow are needed.
For clean-water distribution and domestic equipment support, subject to suction conditions.
A further domestic clean-water selection with its own power and hydraulic curve.
| Power kW | Q m³/h → H m (same curve point) |
|---|---|
| 0.37 | 1.5→15 |
| 0.6 | 1.5→30 |
| 0.75 | 1.5→35 |
Compare the complete configuration ladder for clean-water transfer, household supply and irrigation.
| Motor phase | Power kW | Q m³/h → H m (same curve point) |
|---|---|---|
| 1φ | 0.3 | 1.2→12 |
| 1φ | 0.37 | 1.2→20 |
| 1φ | 0.6 | 1.5→30 |
| 1φ | 0.75 | 1.5→35 |
| 1φ | 0.9 | 1.2→35 |
| 1φ | 1.1 | 1.8→50 |
| 3φ | 1.1 | 1.8→50 |
| 1φ | 1.5 | 2.1→55 |
| 3φ | 1.5 | 2.1→55 |
| 1φ | 2.2 | 2.1→65 |
| 3φ | 2.2 | 2.1→65 |
Clean-water supply with self-priming construction; choose suction conditions and a working curve before ordering.
| Motor phase | Power kW | Q m³/h → H m (same curve point) |
|---|---|---|
| 1φ | 0.37 | 1.2→18 |
| 1φ | 0.6 | 1.5→18 |
| 1φ | 0.75 | 1.5→28 |
| 1φ | 1.1 | 2.1→30 |
| 3φ | 1.1 | 2.1→30 |
A separate configuration ladder for clean-water distribution and garden irrigation.
| Power kW | Q m³/h → H m (same curve point) |
|---|---|
| 0.13 | 1.2→7.5 |
| 0.25 | 1.2→11.5 |
| 0.37 | 1.5→13.5 |
| 0.55 | 1.5→22 |
| 0.75 | 1.8→25.5 |
Domestic water supply and irrigation using a jet arrangement; specify actual suction lift and pipe losses.
| Power kW | Q m³/h → H m (same curve point) |
|---|---|
| 0.3 | 1.2→20 |
| 0.45 | 1.2→25 |
| 0.6 | 1.5→28.5 |
| 0.75 | 2.1→29 |
| 0.75 | 1.5→34.5 |
| 0.9 | 2.1→36 |
| 0.9 | 1.5→43 |
A stainless-body jet option for household supply and garden watering with material compatibility checked.
| Power kW | Q m³/h → H m (same curve point) |
|---|---|
| 0.3 | 1.5→16.5 |
| 0.45 | 1.5→22 |
| 0.6 | 1.5→25 |
| 0.75 | 1.8→30 |
| 0.9 | 2.1→32 |
Configurations vary with suction depth. The suction-depth column is part of each configuration, even when motor identifiers repeat.
| Power kW | HS m | Q m³/h → H m (same curve point) |
|---|---|---|
| 0.55 | 15 | 0.72→21 |
| 0.75 | 15 | 0.84→27 |
| 1.1 | 15 | 0.84→44 |
| 0.55 | 20 | 0.48→19 |
| 0.75 | 20 | 0.6→24 |
| 1.1 | 20 | 0.84→38 |
| 0.55 | 25 | 0.36→14 |
| 0.75 | 25 | 0.48→20 |
| 1.1 | 25 | 0.6→36 |
| 0.55 | 30 | 0.12→13 |
| 0.75 | 30 | 0.24→19 |
| 1.1 | 30 | 0.48→32 |
| 0.75 | 35 | 0.12→15 |
| 1.1 | 35 | 0.24→31 |
| 1.1 | 40 | 0.12→28 |
Clean-water transfer, irrigation and pressure supply; the selected curve governs the working duty.
| Motor phase | Power kW | Q m³/h → H m (same curve point) |
|---|---|---|
| 1φ | 0.25 | 3→13.5 |
| 1φ | 0.37 | 3→18 |
| 1φ | 0.5 | 3→22.5 |
| 3φ | 0.5 | 3→22.5 |
| 1φ | 0.75 | 3.6→29 |
| 3φ | 0.75 | 3.6→29 |
| 1φ | 1.1 | 3.6→35 |
| 3φ | 1.1 | 3.6→35 |
| 1φ | 1.5 | 3.6→42.5 |
| 3φ | 1.5 | 3.6→42.5 |
| 3φ | 2.2 | 3.6→50.5 |
| 1φ | 1.1 | 3.6→33 |
| 3φ | 1.1 | 3.6→33 |
| 1φ | 1.5 | 3.6→35.4 |
| 3φ | 1.5 | 3.6→35.4 |
Multiple stages support domestic pressure supply and irrigation with a range of motor powers.
| Motor phase | Power kW | Q m³/h → H m (same curve point) |
|---|---|---|
| 1φ | 0.45 | 1.8→26.5 |
| 1φ | 0.6 | 1.8→36 |
| 1φ | 0.6 | 2.4→30.5 |
| 1φ | 0.75 | 2.4→38 |
| 3φ | 0.75 | 2.4→38 |
For clean-water pressure supply where stainless construction and a multistage hydraulic layout are preferred.
| Motor phase | Power kW | Q m³/h → H m (same curve point) |
|---|---|---|
| 1φ | 0.37 | 3.6→15 |
| 1φ | 0.6 | 3→24 |
| 3φ | 0.6 | 3→24 |
| 1φ | 0.75 | 3→30 |
| 3φ | 0.75 | 3→30 |
| 1φ | 0.9 | 3.6→35 |
| 3φ | 0.9 | 3.6→35 |
A brushless permanent-magnet motor, copper winding, coated cast-iron body and brass impeller pair with an MPPT controller.
| W | motor V | input V | Qmax m³/h | Hmax m | PV Voc < V |
|---|---|---|---|---|---|
| 550 | 48 | 60–90 | 6 | 24 | 100 |
| 750 | 72 | 90–120 | 21 | 14 | 150 |
| 1100 | 72 | 90–120 | 26 | 15 | 150 |
| 1500 | 110 | 110–150 | 45 | 17 | 200 |
A clean-water supply range combining self-priming operation and stainless multistage construction.
| Motor phase | Power kW | Q m³/h → H m (same curve point) |
|---|---|---|
| 1φ | 0.6 | 3→24 |
| 3φ | 0.6 | 3→24 |
| 1φ | 0.75 | 3→30 |
| 3φ | 0.75 | 3→30 |
| 1φ | 0.9 | 3.6→35 |
| 3φ | 0.9 | 3.6→35 |
Brushless permanent-magnet drive and MPPT control suit off-grid clean-water transfer. Rated motor voltage and PV input limits differ.
| W | motor V | input V | Qmax m³/h | Hmax m | PV Voc < V |
|---|---|---|---|---|---|
| 210 | 24 | 30–48 | 2 | 25 | 50 |
| 280 | 24 | 30–48 | 2 | 30 | 50 |
| 550 | 48 | 60–90 | 3 | 50 | 100 |
| 750 | 72 | 90–120 | 3 | 65 | 150 |
Clean-water pumping with alternative AC and solar DC inputs; controller matching includes soft start and water-level control.
| W | AC V | DC V | Qmax m³/h | Hmax m | PV Voc < V |
|---|---|---|---|---|---|
| 750 | 80–280 | 90–200 | 21 | 14 | 430 |
| 1100 | 80–280 | 90–300 | 26 | 15 | 430 |
| 1500 | 80–280 | 90–380 | 45 | 17 | 430 |
For water with limited impurities or mild corrosiveness, subject to fluid assessment; semi-open impellers offer different passage sizes.
| kW | Q m³/h | H m | passage mm |
|---|---|---|---|
| 0.37 | 6 | 7.5 | 9 |
| 0.75 | 12 | 7 | 12 |
| 0.9 | 12 | 10 | 12 |
| 1.1 | 24 | 6.7 | 12 |
| 1.5 | 24 | 10 | 16 |
| 2.2 | 24 | 12.7 | 16 |
| 3 | 24 | 15.2 | 19 |
Float-controlled drainage with engineering-plastic housing and thermal protection. Particle passage varies by configuration.
| W | Hmax m | Qmax m³/h | immersion m | particles mm |
|---|---|---|---|---|
| 250 | 5 | 8 | 7 | 25 |
| 400 | 5 | 10 | 7 | 25 |
| 550 | 7 | 12 | 7 | 35 |
| 750 | 8 | 14 | 7 | 35 |
Stainless wet components, copper winding; household supply, irrigation and circulation.
| Motor phase | Power kW | Q m³/h → H m (same curve point) |
|---|---|---|
| 1φ | 0.37 | 3.6→15.7 |
| 3φ | 0.37 | 3.6→15.7 |
| 1φ | 0.55 | 3.6→23.4 |
| 3φ | 0.55 | 3.6→23.4 |
| 1φ | 0.75 | 3.6→26 |
| 3φ | 0.75 | 3.6→26 |
| 1φ | 0.55 | 7.2→13.3 |
| 3φ | 0.55 | 7.2→13.3 |
| 1φ | 1.1 | 7.2→21.2 |
| 3φ | 1.1 | 7.2→21.2 |
| 1φ | 0.75 | 10.8→14.2 |
| 3φ | 0.75 | 10.8→14.2 |
| 1φ | 1.1 | 10.8→17.5 |
| 3φ | 1.1 | 10.8→17.5 |
| 1φ | 1.5 | 10.8→22.4 |
| 3φ | 1.5 | 10.8→22.4 |
| 1φ | 2.2 | 10.8→25.7 |
| 3φ | 2.2 | 10.8→25.7 |
| 1φ | 1.1 | 15→13.5 |
| 3φ | 1.1 | 15→13.5 |
| 1φ | 1.5 | 18→16.3 |
| 3φ | 1.5 | 18→16.3 |
| 1φ | 2.2 | 18→20 |
| 3φ | 2.2 | 18→20 |
A separate solar or AC-input peripheral configuration for clean-water transfer; array and controller limits require joint selection.
Float-controlled pumping for clean-water drainage with a smaller particle allowance than dirty-water ranges.
| W | Hmax m | Qmax m³/h |
|---|---|---|
| 250 | 6 | 7 |
| 400 | 6 | 9 |
Garden submersible drainage with a float switch. The listed application excludes saline, flammable liquids and foodstuffs.
| W | Hmax m | Qmax m³/h |
|---|---|---|
| 550 | 7 | 13.5 |
| 750 | 8 | 16.5 |
| 1000 | 9 | 19.5 |
Automatic adaptation, proportional-pressure and constant-pressure modes, fixed speeds and conditional night setback support heating-system matching.
| Qmax m³/h | Hmax m | W |
|---|---|---|
| 2 | 4.1 | 22 |
| 2.3 | 5.2 | 32 |
| 2.6 | 6.2 | 45 |
| 2 | 4 | 22 |
| 2.3 | 5.1 | 32 |
| 2.6 | 6.1 | 45 |
| 2.1 | 4 | 22 |
| 2 | 4 | 22 |
| 2.3 | 5 | 32 |
| 2.3 | 5 | 32 |
| 2.4 | 6.1 | 45 |
| 2.7 | 6 | 45 |
| 2.2 | 4 | 22 |
| 2.5 | 5.1 | 32 |
| 2.8 | 6.1 | 45 |
An automatic surface-pump selection for clean-water supply with its own power and hydraulic ladder.
| Power kW | Q m³/h → H m (same curve point) |
|---|---|
| 0.25 | 1.2→10 |
| 0.37 | 1.2→15 |
| 0.6 | 1.5→18 |
| 0.75 | 1.5→25 |
Project selection for residential blocks, offices, hotels, waterworks, boilers and cooling circulation; controls and duty/standby arrangements need a project schedule.
Boiler and gas-water-heater circulation pumps with different hydraulic bodies and speed settings; mounting and wiring must match the appliance.
| W at speeds 3/2/1 | Qmax L/min at speeds 3/2/1 | Hmax m at speeds 3/2/1 |
|---|---|---|
| 100/85/70 | 37/28/17 | 6/5.2/3.4 |
| 130/120/105 | 35/32/23 | 6.8/6.3/5.1 |
| 100/85/70 | 35/33/27 | 5.9/5.7/5.3 |
| 130/120/105 | 40/30/17 | 6.7/6/4.2 |
| 100/85/70 | 38/28/17 | 5.8/4.8/3.2 |
| 100/85/70 | 37/28/17 | 5.8/4.8/3.2 |
| 130/120/105 | 42/35/23 | 6.5/5.6/4.8 |
| 100/85/70 | 37/33/27 | 6/5.8/5.5 |
| 130/120/105 | 43/35/22 | 6.9/6/4.3 |
| 100/85/70 | 38/32/20 | 5.9/5.1/3.4 |
| 130/120/105 | 42/35/27 | 6.8/6.2/5.1 |
Well or reservoir supply for domestic use and irrigation; single-phase and three-phase versions are separately specified.
| kW | H m at Q 3m³/h |
|---|---|
| 0.55 | 30 |
| 0.75 | 41 |
| 0.92 | 51 |
| 1.1 | 61 |
| 1.3 | 71 |
| 1.5 | 81 |
A further well-water configuration set for domestic, civil and irrigation installations.
| kW | H m at Q 1.5m³/h |
|---|---|
| 0.75 | 28 |
| 1.1 | 48 |
| 1.5 | 56 |
For building supply, cleaning, sprinkler and drip systems, cooling circulation and equipment integration; select the complete hydraulic assembly.
Domestic and equipment pressure supply with integrated control; three hydraulic subranges retain separate curves and package references.
| kW | H m at Q 2m³/h |
|---|---|
| 0.25 | 13.5 |
| 0.37 | 20.5 |
| 0.37 | 27.5 |
| 0.55 | 33.5 |
| 0.75 | 41.5 |
| kW | H m at Q 3m³/h |
|---|---|
| 0.25 | 13 |
| 0.37 | 19 |
| 0.55 | 25.5 |
| 0.55 | 32 |
| 0.75 | 39 |
| kW | H m at Q 4m³/h |
|---|---|
| 0.37 | 13 |
| 0.55 | 20 |
| 0.75 | 28 |
| 0.75 | 35 |
For household water, greenhouse irrigation, aquaculture support, buildings and central heating or air-conditioning circulation.
Three assembly variants share hydraulic selections but differ in construction and packing. Start and stop settings are configuration-specific.
| W | Hmax m | Qmax m³/h | suction m | stop bar |
|---|---|---|---|---|
| 600 | 35 | 3 | 7 | 2.4 |
| 800 | 40 | 3.7 | 7 | 2.8 |
| 1000 | 45 | 4.5 | 8 | 2.8 |
| 1200 | 50 | 5 | 8 | 2.8 |
| 600 | 35 | 3 | 7 | 2.4 |
| 800 | 40 | 3.7 | 7 | 2.8 |
| 1000 | 45 | 4.5 | 8 | 2.8 |
| 1200 | 50 | 5 | 8 | 2.8 |
| 600 | 35 | 3 | 7 | 2.4 |
| 800 | 40 | 3.7 | 7 | 2.8 |
| 1000 | 45 | 4.5 | 8 | 2.8 |
| 1200 | 50 | 5 | 8 | 2.8 |
Self-priming garden transfer with a separate electrical version; confirm the selected single or dual-voltage arrangement.
| W | Hmax m | Qmax m³/h | suction m |
|---|---|---|---|
| 600 | 35 | 3 | 7 |
| 800 | 40 | 3.7 | 7 |
| 1000 | 45 | 4.5 | 8 |
| 1200 | 50 | 5 | 8 |
Stainless pump direction for water distribution, irrigation and central heating or cooling support; obtain the current curve for the chosen assembly.
For equipment support, household distribution, agricultural watering and building circulation, with material and motor details selected per duty.
Industrial transfer, power generation, water treatment, marine or desalination projects and oil transmission require fluid-specific materials and seals.
A vertical multistage arrangement for condensate service, with temperature and installation selected for the project.
Long-shaft water-pumping projects require shaft length, bearing lubrication, intake submergence and foundation data before selection.
Process circulation for alkali, salt and related chemical duties; a back-pull-out rotor arrangement allows maintenance without removing the connected pipework.
Large water movement for power-station cooling, steel plants, ports, urban drainage and farmland irrigation.
Radially split, double-volute arrangements with single, double or three stages; suction type, nozzle orientation and sealing require a fluid-specific specification.
For power plants, steel works, quays, municipal drainage and irrigation schemes; project hydraulics and installation conditions govern selection.
A project option for recovering pressure energy from liquid streams in chemical, petrochemical and process installations; recovery output needs a process calculation.
Civil engineering, mines and treatment works handling sludge, mud or bentonite; distinguish solids passage from allowable concentration and abrasion.
| kW | outlet mm | Qmax m³/h | Hmax m | particles mm |
|---|---|---|---|---|
| 4 | 80 | 99 | 14.8 | 30 |
| 6 | 100 | 144 | 16.9 | 30 |
| 9 | 150 | 192 | 21.5 | 30 |
For construction, mines and general drainage; outlet sizes and hydraulic endpoints vary across the configuration ladder.
| kW | outlet mm | Qmax m³/h | Hmax m | particles mm |
|---|---|---|---|---|
| 1.5 | 50 | 33 | 22 | 8.5 |
| 2.2 | 50 | 33 | 26 | 8.5 |
| 3.7 | 50 | 33 | 34 | 8.5 |
| 1.5 | 80 | 40 | 14.5 | 8.5 |
| 2.2 | 80 | 55 | 19 | 8.5 |
| 3.7 | 80 | 55 | 29 | 8.5 |
| 5.5 | 80 | 75 | 34 | 8.5 |
| 3.7 | 100 | 90 | 18.5 | 8.5 |
| 5.5 | 100 | 105 | 23 | 8.5 |
Engineering-plastic housing and thermal protection for spa circulation; standard and optional connection sizes require matching to the bath system.
| kW | V at 50 Hz | V at 60 Hz | Qmax L/min | Hmax m |
|---|---|---|---|---|
| 0.5 | 220–240 | 220 | 300 | 8 |
| 0.6 | 220–240 | 110 | 320 | 9 |
| 0.8 | 220–240 | 110 | 330 | 10 |
| 0.9 | 220–240 | 110 | 350 | 11 |
| 1.1 | 220–240 | 110 | 400 | 11 |
| 1.3 | 220–240 | 110 | 450 | 12 |
Single-stage vertical water movement for power stations, mines, cities and farmland; single or separate motor foundations and seal arrangements are project choices.
Domestic, industrial and construction drainage with configuration-specific solids passage and immersion limits.
| Power kW | Rated Flow m³/h | Rated Head m | Max. Flow m³/h | Max. Head m | Max. dia. of particle mm |
|---|---|---|---|---|---|
| 0.18 | 6 | 5 | 11 | 8 | 20 |
| 0.25 | 8 | 5 | 12 | 9 | 20 |
| 0.37 | 8 | 6 | 13 | 11 | 20 |
| 0.55 | 10 | 8 | 16 | 13.5 | 20 |
| 0.75 | 10 | 11 | 19 | 17 | 20 |
| 1.1 | 15 | 10 | 26 | 13.5 | 25 |
| 1.5 | 18 | 12 | 32 | 19 | 25 |
| 2.2 | 20 | 15 | 34.5 | 23 | 25 |
Integrated water sensing supports well, pool or basement pumping; automatic assemblies have their own immersion and cable limits.
| W | Hmax m | Qmax m³/h | impellers |
|---|---|---|---|
| 900 | 35 | 6 | 3 |
| 1100 | 45 | 6 | 4 |
| 900 | 35 | 6 | 3 |
| 1100 | 45 | 6 | 4 |
Portable clean-water lifting, vessel drainage and garden watering; battery, pump immersion and battery-box placement must be selected separately.
An engine-driven clean-water transfer option for sites without a suitable electrical supply.
Small engine-driven clean-water transfer configurations with separate flow/head curves; fuel preparation follows the matched engine instructions.
| HP | cc | Q m³/h | H m |
|---|---|---|---|
| 1.6 | 42.7 | 4 | 26.9 |
| 1.6 | 42.7 | 10 | 27.5 |
Building heating, district cooling, pressure boosting and industrial circulation; select motor, coupling and material configuration for the duty.
Deep-well water supply and irrigation with controlled and standard variants; stages, outlets and permissible immersion differ.
| W | Hmax m | Qmax m³/h | immersion m | stages | start bar |
|---|---|---|---|---|---|
| 750 | 35 | 6 | 12 | 5 | 2 |
| 900 | 42 | 6 | 16 | 6 | 2.5 |
| 1000 | 49 | 6 | 19 | 7 | 2.5 |
| 1100 | 55 | 6 | 19 | 8 | 3 |
| 750 | 35 | 6 | 19 | 5 | — |
| 900 | 42 | 6 | 19 | 6 | — |
| 1000 | 49 | 6 | 19 | 7 | — |
| 1100 | 55 | 6 | 19 | 8 | — |
| 1200 | 63 | 6 | 19 | 9 | — |
| 1300 | 70 | 6 | 19 | 10 | — |
For clean well water, domestic supply and irrigation with alternative electrical versions and standard or controlled assemblies.
| V options | Q m³/h | H m |
|---|---|---|
| 110–120|220–240 | 4 | 23.4 |
| 110–120|220–240 | 4 | 30.5 |
| 110–120|220–240 | 4 | 38.7 |
| 110–120|220–240 | 4 | 46.9 |
Solar-powered well and irrigation pumping; rated voltage, MPPT operating input and array open-circuit voltage require separate checks.
| W | rated V | input V | Qmax m³/h | Hmax m | PV Voc < V |
|---|---|---|---|---|---|
| 300 | 24 | 30–48 | 4 | 35 | 50 |
| 400 | 48 | 60–90 | 4 | 50 | 100 |
| 500 | 48 | 60–90 | 4 | 67 | 100 |
| 600 | 48 | 60–90 | 4 | 80 | 100 |
| 750 | 72 | 90–120 | 4.8 | 95 | 150 |
| 1100 | 72 | 90–120 | 4.8 | 112 | 150 |
| 1100 | 110 | 110–150 | 4.8 | 112 | 200 |
| 1500 | 110 | 110–150 | 4.8 | 135 | 200 |
| 1500 | 110 | 110–150 | 4.6 | 150 | 200 |
| 1500 | 110 | 110–150 | 4.3 | 165 | 200 |
Engine-driven clean-water transfer with two hydraulic configurations; engine consumables and service parts follow the selected assembly.
| HP | cc | Q m³/h | H m |
|---|---|---|---|
| 3.8 | 219 | 20 | 13 |
| 3.8 | 219 | 30 | 15 |
A separate plastic-impeller solar well-pump direction. Request a matched current performance sheet for the selected construction.
Lower-flow well pumping with a screw hydraulic layout and DC controller; voltage and head limits vary by configuration.
| W | rated V | input V | Qmax m³/h | Hmax m | PV Voc < V |
|---|---|---|---|---|---|
| 80 | 12 | 20–36 | 0.5 | 28 | 50 |
| 120 | 24 | 30–48 | 1.2 | 56 | 50 |
| 210 | 36 | 30–48 | 1.2 | 77 | 50 |
| 500 | 48 | 60–90 | 1.7 | 109 | 100 |
| 750 | 48 | 60–90 | 2 | 150 | 100 |
| 750 | 72 | 90–120 | 2 | 150 | 150 |
| 1100 | 72 | 90–120 | 2.2 | 180 | 150 |
Removable filter and float-controlled operation for rainwater collection; residual water level and allowable particles are different selection factors.
Several engine and hydraulic combinations support higher-head clean-water duties; engine choice remains part of the order specification.
| HP | cc | Q m³/h | H m |
|---|---|---|---|
| 6.5 | 196 | 15 | 44.5 |
| 6.5 | 196 | 15 | 44.5 |
| 6.5 | 196 | 15 | 45 |
| 6.5 | 196 | 15 | 45 |
| 6.5 | 208 | 15 | 41 |
| 6.5 | 208 | 15 | 45 |
Two engine-driven hydraulic configurations for clean-water transfer; actual flow and head are matched on the relevant curve.
| HP | cc | Q m³/h | H m |
|---|---|---|---|
| 6.5 | 196 | 20 | 16 |
| 6.5 | 196 | 30 | 19.5 |
For low-viscosity, nonflammable liquids without solids or fibres: building supply, boiler feed, filtration, RO, ultrafiltration, distillation and irrigation.
A separate frequency-specific whirlpool range; hydraulic endpoints and connections do not establish voltage interchangeability.
| kW | Qmax L/min | Hmax m |
|---|---|---|
| 0.6 | 320 | 9 |
| 0.8 | 330 | 10 |
| 0.9 | 350 | 11 |
| 1.1 | 400 | 11 |
| 1.3 | 450 | 12 |
For domestic pressure supply, floor heating and solar water-system integration; match the wetted materials and temperature rating.
For HVAC, household hot-water circulation and district heating, with separate speed-specific input and hydraulic limits.
| W at speeds 3/2/1 | Qmax L/min at speeds 3/2/1 | Hmax m at speeds 3/2/1 |
|---|---|---|
| 74/54/34 | 38.3/30/21.7 | 4.2/3.6/2.4 |
| 85/60/40 | 38.3/30/21.7 | 4.5/4/2.6 |
| 96/69/45 | 38.3/28.3/21.7 | 5.5/4.7/3 |
| 270/200/160 | 58.3/45/25 | 12/11/3.5 |
A broad mounting and hydraulic range for domestic and district heating, cooling and auxiliary equipment; speed-three references support initial comparison.
| speed 3 W | speed 3 Qmax L/min | speed 3 Hmax m |
|---|---|---|
| 67 | 46 | 4.5 |
| 67 | 46 | 4.5 |
| 68 | 51 | 4.3 |
| 72 | 60 | 4.6 |
| 73 | 64 | 4.6 |
| 69 | 60 | 4.3 |
| 85 | 40 | 4.5 |
| 85 | 47 | 4.5 |
| 75 | 50 | 5.2 |
| 73 | 60 | 5.3 |
| 75 | 63 | 5.2 |
| 73 | 63 | 5.2 |
| 85 | 48 | 6 |
| 85 | 48 | 6 |
| 96 | 53 | 5.5 |
| 83 | 58 | 5.5 |
| 83 | 68 | 6.1 |
| 85 | 66 | 5.9 |
| 150 | 67 | 6.3 |
| 150 | 67 | 6.3 |
| 150 | 67 | 6.3 |
| 200 | 120 | 7.1 |
| 270 | 167 | 7.3 |
| 270 | 170 | 7.3 |
| 270 | 170 | 7.3 |
| 270 | 170 | 7.3 |
| 268 | 81 | 12 |
| 268 | 81 | 12 |
AC or DC-input well pumping with a distinct plastic hydraulic assembly and controller-matching requirements.
| W | AC V | DC V | Qmax m³/h | Hmax m |
|---|---|---|---|---|
| 750 | 80–280 | 90–200 | 3.5 | 95 |
| 1100 | 80–280 | 90–300 | 3.8 | 123 |
| 1300 | 80–280 | 90–300 | 3.8 | 155 |
| 1500 | 80–280 | 90–380 | 3.8 | 180 |
| 1500 | 80–280 | 90–380 | 3.5 | 195 |
Solar or AC-input well supply with stainless impeller construction; PV limits remain distinct from operating input ranges.
| W | AC V | DC V | Qmax m³/h | Hmax m |
|---|---|---|---|---|
| 750 | 80–280 | 90–200 | 4.8 | 95 |
| 1100 | 80–280 | 90–300 | 4.8 | 112 |
| 1500 | 80–280 | 90–380 | 4.8 | 135 |
| 1500 | 80–280 | 90–380 | 4.6 | 150 |
| 1500 | 80–280 | 90–380 | 4.3 | 165 |
For HVAC, cooling, mains boosting, boiler feed, industrial cleaning and water-treatment systems; inlet pressure and pipe arrangement are project inputs.
For solar-heated water, household pressure supply and bathing systems; obtain an unambiguous temperature limit for the selected unit.
| kW | Q m³/h | H m |
|---|---|---|
| 0.125 | 4.5 | 3.8 |
| 0.25 | 6 | 4.6 |
| 0.37 | 9 | 6.2 |
| 0.55 | 9 | 14.9 |
| 0.37 | 2.4 | 13.4 |
| 0.75 | 3 | 26.3 |
Two hydraulic configurations for heating, air conditioning, industrial circulation and household boosting.
| kW | Q m³/h | H m |
|---|---|---|
| 1.5 | 18 | 19 |
| 2.2 | 18 | 26 |
For cisterns, rainwater tanks, ponds, wells and sprinklers; stage count, float control and immersion are selected together.
| W | Hmax m | Qmax m³/h | impellers |
|---|---|---|---|
| 900 | 32 | 7 | 3 |
| 1100 | 42 | 7 | 4 |
| 1300 | 52 | 7 | 5 |
For slightly contaminated water within the specified solids allowance; select pipework and priming arrangements for the actual site.
Engine-driven water transfer with distinct engine sizes and hydraulic curves; solids tolerance requires the selected pump specification.
| HP | cc | Q m³/h | H m |
|---|---|---|---|
| 5 | 163 | 20 | 18.6 |
| 9 | 270 | 30 | 16 |
Push and self-propelled metal-deck variants provide central cutting-height adjustment and rear discharge. Battery system selection requires current confirmation.
| width cm | motor W | height mm | bag L | drive |
|---|---|---|---|---|
| 40 | 600 | 30–80 | 45 | push |
| 46 | 800 | 30–80 | 70 | push |
| 46 | 800 | 30–80 | 70 | self-propelled |
| 48 | 1000 | 30–80 | 70 | push |
| 48 | 1000 | 30–80 | 70 | self-propelled |
| 51 | 1000 | 30–80 | 70 | push |
| 51 | 1000 | 30–80 | 70 | self-propelled |
Self-priming household supply with standard and electronic variants; confirm the control assembly and available suction conditions.
| W | Hmax m | Qmax m³/h |
|---|---|---|
| 900 | 42 | 3.6 |
| 1100 | 46 | 4.6 |
| 900 | 42 | 3.6 |
| 1100 | 46 | 4.6 |
| 900 | 42 | 3.6 |
| 1100 | 46 | 4.6 |
Self-priming clean-water supply with a pressure tank and configuration-specific switch settings.
| W | Hmax m | Qmax m³/h |
|---|---|---|
| 900 | 42 | 3.6 |
| 1100 | 46 | 4.6 |
Opposed impellers and first-stage single or double suction support chemical-process selection; materials, particle loading and seals require a defined fluid schedule.
Domestic water supply, garden watering and building pressure support using a permanent-magnet motor; controls are selected for the system.
Foot-mounted and centreline-supported layouts address different process requirements; fluid, temperature and seal specification determine the package.
Steel decks, central height adjustment, mulching and rear or side discharge; pull-start and electric-start assemblies offer different handling choices.
| width cm | cc | HP | bag L | drive |
|---|---|---|---|---|
| 46 | 149 | 4.5 | 70 | push |
| 46 | 149 | 4.5 | 70 | self-propelled |
| 51 | 171 | 5.5 | 70 | push |
| 51 | 171 | 5.5 | 70 | self-propelled |
| 48 | 171 | 5.5 | 70 | push |
| 48 | 171 | 5.5 | 70 | self-propelled |
| width cm | cc | HP | electric-start battery |
|---|---|---|---|
| 46 | 149 | 4.5 | lead-acid |
| 46 | 149 | 4.5 | lithium-ion |
| 51 | 171 | 5.5 | lead-acid |
| 51 | 171 | 5.5 | lithium-ion |
| 48 | 171 | 5.5 | lead-acid |
| 48 | 171 | 5.5 | lithium-ion |
| 56 | 196 | 6.5 | lead-acid |
| 56 | 196 | 6.5 | lithium-ion |
| width cm | cc | HP | drive |
|---|---|---|---|
| 56 | 196 | 6.5 | push |
| 56 | 196 | 6.5 | self-propelled |
A garden range with wash-connector and storage features, central height adjustment and pull or electric starting.
| width cm | cc | HP | start |
|---|---|---|---|
| 46 | 149 | 4.5 | pull |
| 46 | 149 | 4.5 | electric/pull lithium |
| 48 | 171 | 5.5 | pull |
| 48 | 171 | 5.5 | electric/pull lithium |
| 51 | 171 | 5.5 | pull |
| 51 | 171 | 5.5 | electric/pull lithium |
| 56 | 196 | 6.5 | pull |
| 56 | 196 | 6.5 | electric/pull lithium |
Forward-drive garden cultivation with alternative working widths; protection discs and an engine cover are configuration-dependent.
| width cm | cc | HP | depth mm | blades | assembly |
|---|---|---|---|---|---|
| 36 | 132 | 4 | 200 | 4 | standard |
| 36 | 132 | 4 | 200 | 4 | protection discs |
| 45 | 79 | 3 | 200 | 4 | standard |
| 45 | 79 | 3 | 200 | 4 | protection discs and engine cover |
| 56 | 149 | 4.5 | 200 | 6 | standard |
| 56 | 149 | 4.5 | 200 | 6 | protection discs |
Large-flow drainage and irrigation for municipal, industrial and water-conservancy schemes; installation and intake conditions need project engineering.
A separate lightweight water-pump configuration ladder for rural wells and irrigation; compare exact nonzero curve points.
| Q m³/h | H m |
|---|---|
| 3 | 11 |
| 3 | 15 |
| 3 | 22.5 |
| 3 | 29.5 |
| 3 | 11 |
| 3 | 14 |
| 3 | 18 |
| 10 | 10 |
| 10 | 16 |
| 10 | 16 |
| 10 | 18 |
| 15 | 7 |
| 15 | 10 |
| 15 | 14 |
| 15 | 9.6 |
| 15 | 12 |
| 15 | 9.2 |
| 15 | 12 |
| 15 | 15.4 |
| 15 | 12 |
| 15 | 15.4 |
| 15 | 15.4 |
Single-phase-only small variants and other motor arrangements serve irrigation and well-water lifting; phase must be tied to the chosen assembly.
| Q m³/h | H m |
|---|---|
| 3 | 11 |
| 3 | 14.2 |
| 3 | 22.5 |
| 3 | 18.5 |
| 3 | 13.2 |
| 3 | 8.5 |
| 3 | 28.5 |
| 3 | 19 |
| 3 | 19 |
| 3 | 12 |
| 3 | 10.5 |
| 3 | 25 |
| 3 | 16.5 |
| 3 | 9.5 |
| 30 | 10.5 |
| 30 | 10.5 |
| 30 | 10.5 |
| 30 | 10.5 |
| 30 | 13.7 |
| 30 | 13.7 |
Wastewater drainage with single- and three-phase alternatives; rated duty, maximum endpoints and particle allowance are separate fields.
| outlet mm | kW | rated Q m³/h | rated H m | Qmax m³/h | Hmax m | particles mm |
|---|---|---|---|---|---|---|
| 50 | 0.55 | 9 | 6 | 19 | 9.5 | 35 |
| 50 | 0.55 | 13 | 4 | 22 | 6 | 50 |
| 50 | 0.75 | 12 | 8 | 22.5 | 13 | 35 |
| 50 | 0.75 | 15 | 5.5 | 27 | 9 | 50 |
For pressure-sewage systems with configuration-specific rated head and motor power; match the discharge pipe and actual wastewater characteristics.
| outlet mm | kW | rated Q m³/h | rated H m | Qmax m³/h | Hmax m |
|---|---|---|---|---|---|
| 32 | 1.1 | 3.6 | 17 | 8 | 18 |
| 32 | 1.5 | 3.6 | 23 | 10 | 23.2 |
| 32 | 2.2 | 3.6 | 30 | 12 | 30.2 |
Wastewater configurations offer different power and rated duty; the highest-power listed option is three-phase only.
| outlet mm | kW | rated Q m³/h | rated H m | Qmax m³/h | Hmax m | particles mm |
|---|---|---|---|---|---|---|
| 50 | 0.55 | 6 | 12 | 19 | 15 | 20 |
| 50 | 0.75 | 6 | 16 | 22 | 19 | 20 |
| 50 | 0.75 | 10 | 10 | 20 | 15 | 20 |
| 50 | 1.1 | 8 | 16 | 26 | 19 | 15 |
| 50 | 1.5 | 8 | 20 | 25 | 22 | 15 |
| 50 | 2.2 | 15 | 20 | 45 | 23 | 25 |
| 50 | 3 | 15 | 25 | 51 | 27 | 25 |
Clean-water lifting with restricted sand and particle content; this hydraulic construction is distinct from sewage drainage.
For demanding process duties using a supported multistage inner cartridge; pressure, head and temperature envelopes represent different engineered configurations.
Project wastewater pumping with coupled installation and optional monitoring or control provisions; assess fibre content and maintenance access.
A space-conscious vertical arrangement for frequent-start process or drainage duties; priming, siphon behaviour and seal selection need application review.
A stainless multistage direction for RO, ultrafiltration, distillation, boiler feed, cleaning and water-supply integration.
Wastewater drainage for factories, construction, treatment works and residential stations; installation, control and materials follow the project schedule.
Wastewater duties with several motor-power construction groups; monitoring probes are optional on specific assemblies.
Automatic lifting for renovation drainage, with cutting, carbon-filter and protection features; sewage chemistry and fixture connections must be checked.
Industrial and commercial fire-water project selection; rated duty and required local approvals must be agreed with the project designer.
Waterworks, cleaning, boiler feed, cooling and treatment duties; light acid or alkali service needs fluid-specific material assessment.
| kW | Q m³/h | H m |
|---|---|---|
| 1.1 | 12 | 19.5 |
| 1.5 | 12 | 25 |
| 2.2 | 12 | 32 |
| 3 | 12 | 38 |
| 4 | 12 | 49 |
| 1.5 | 30 | 12.5 |
| 2.2 | 30 | 19.5 |
| 3 | 30 | 24 |
| 4 | 30 | 31 |
| 5.5 | 30 | 39 |
| 7.5 | 30 | 48 |
| 3 | 60 | 13 |
| 4 | 60 | 17 |
| 5.5 | 60 | 24 |
| 7.5 | 60 | 29 |
| 11 | 60 | 39.5 |
| 11 | 60 | 47 |
| 4 | 60 | 14 |
| 5.5 | 60 | 18 |
| 7.5 | 60 | 23.5 |
| 11 | 60 | 28 |
| 11 | 60 | 33 |
| 15 | 60 | 41 |
| 18.5 | 60 | 49 |
| 22 | 60 | 55 |
Two higher-power clean-water configurations with a distinct frequency and voltage selection.
| V | kW | Q m³/h | H m |
|---|---|---|---|
| 220–230/440–460 | 5.5 | 15 | 63 |
| 220–230/440–460 | 7.5 | 15 | 85 |
Urban or industrial water distribution, boiler feed, cleaning, circulation, treatment and agricultural irrigation.
For nonaggressive water, irrigation and air-conditioning circulation; select construction, motor and curve for the installation.
Well or reservoir supply for domestic, civil, industrial and irrigation projects; request a matched stage and motor schedule.
Water lifting for wells, reservoirs and gardens with project-specific hydraulic and electrical selection.
A separate domestic clean-water power ladder with frequency-specific hydraulic curves.
| kW | Q m³/h | H m |
|---|---|---|
| 0.37 | 6 | 10.41 |
| 0.55 | 6 | 14.85 |
| 0.75 | 6 | 20.46 |
| 1.1 | 6 | 24.3 |
| 1.5 | 6 | 26.94 |
Three construction directions cover small-particle drainage, larger-particle wastewater and stainless-bodied transfer, each with its own endpoints.
| W | Qmax m³/h | Hmax m | particles mm | outlet inch |
|---|---|---|---|---|
| 300 | 10 | 7 | 5 | 1.25 |
| 400 | 12 | 8 | 5 | 1.25 |
| 550 | 14 | 9 | 5 | 1.5 |
| 750 | 16 | 10 | 5 | 1.5 |
| 1000 | 18 | 11 | 5 | 1.5 |
| 300 | 12 | 6 | 25 | 1.25 |
| 400 | 14 | 7 | 25 | 1.25 |
| 550 | 16 | 8 | 35 | 1.5 |
| 750 | 18 | 9 | 35 | 1.5 |
| 1000 | 20 | 10 | 35 | 1.5 |
| 250 | 5.5 | 6 | 5 | 1.25 |
| 400 | 8 | 7 | 5 | 1.25 |
| 500 | 9 | 7 | 5 | 1.25 |
| 750 | 11 | 8 | 5 | 1.25 |
| 1000 | 12 | 12 | 5 | 1.25 |
Pool circulation using solar DC or AC input; power, input range, PV voltage and circulation requirements are matched together.
| W | AC V | DC V | Qmax m³/h | Hmax m | PV Voc < V |
|---|---|---|---|---|---|
| 900 | 80–280 | 90–200 | 20 | 19 | 430 |
| 1200 | 80–280 | 90–300 | 27 | 19 | 430 |
For pool-water circulation with a plastic body and a thermal-protection option; winding material and electrical version require selection.
| Power W | Q m³/h → H m (same curve point) |
|---|---|
| 250 | 6→2.9 |
| 300 | 6→4.2 |
| 350 | 6→6.2 |
| 450 | 6→7.2 |
| 550 | 9→8 |
| 750 | 9→9.7 |
| 850 | 9→10.5 |
Solar-powered pool circulation with several motor and input-voltage arrangements; rated motor voltage is distinct from PV open-circuit voltage.
| W | rated V | input V | Qmax m³/h | Hmax m | PV Voc < V |
|---|---|---|---|---|---|
| 500 | 48 | 60–90 | 15 | 14 | 100 |
| 900 | 72 | 90–120 | 20 | 19 | 150 |
| 1200 | 72 | 90–120 | 27 | 19 | 150 |
| 1200 | 110 | 110–150 | 27 | 19 | 200 |
Small pumps for decorative fountains and pond circulation; choose the nozzle, filter arrangement and installation head without assuming a water-treatment result.
| input W | Qmax L/h | Hmax m | outlet mm |
|---|---|---|---|
| 15 | 850 | 1 | 13 |
| 20 | 1100 | 1.1 | 13 |
| 35 | 1600 | 1.4 | 19 |
| 55 | 2300 | 2.3 | 19 |
| 75 | 2650 | 2.7 | 19 |
| 95 | 3500 | 3 | 19 |
| 110 | 3750 | 3.7 | 19 |
Clean-water supply and irrigation with a distinct self-priming hydraulic range.
| Motor phase | Power kW | Q m³/h → H m (same curve point) |
|---|---|---|
| 1φ | 1.1 | 10.2→8.5 |
| 3φ | 1.1 | 10.2→8.5 |
| 1φ | 1.5 | 10.2→13.5 |
| 3φ | 1.5 | 10.2→13.5 |
A separate clean-water motor and curve ladder for household or agricultural supply.
| Motor phase | Power kW | Q m³/h → H m (same curve point) |
|---|---|---|
| 1φ | 0.75 | 9.6→9 |
| 3φ | 0.75 | 9.6→9 |
| 1φ | 0.6 | 7.8→7.5 |
| 3φ | 0.6 | 7.8→7.5 |
Clean-water pressure supply with several motor powers; confirm mounting, electrical supply and seal compatibility.
| Motor phase | Power kW | Q m³/h → H m (same curve point) |
|---|---|---|
| 1φ | 0.37 | 3→16.5 |
| 1φ | 0.6 | 3→22 |
| 1φ | 0.75 | 3→31.5 |
| 3φ | 0.75 | 3→31.5 |
| 1φ | 0.9 | 3.6→32 |
| 3φ | 0.9 | 3.6→32 |
Clean-water supply combining self-priming and multiple stages; its liquid-temperature limit differs from the adjacent non-self-priming range.
| Power kW | Q m³/h → H m (same curve point) |
|---|---|
| 0.9 | 3→26 |
| 1.1 | 3→38 |
| 1.3 | 3→45 |
For domestic, civil, industrial and irrigation water lifting; specify well diameter, dynamic water level and required duty.
Low-head, high-flow water movement with power-frequency or variable-frequency operation; foundation and drive-end rotation are installation-specific.
Numbered configurations follow the order shown within each card and are selection references. A Q→H entry is one point from the same performance curve. Qmax and Hmax are separate endpoints and do not describe a simultaneous operating point. Series envelopes cover different engineered configurations. Final selection requires the current matched curve, installation conditions and a written quotation. 1φ and 3φ denote single and three phase. HS denotes suction depth; a phase choice or suction-depth change remains part of the configuration.
Focus the sourcing conversation on the features, materials and production details that make a difference to your product range.
Share flow, total head, suction arrangement, water level and operating schedule. We organise a comparison that reflects the installation and the liquid, including particle or fibre content where relevant.
Review the pump, motor or engine, controller, tank, float or sensor, cable and pipe connections together. Solar arrays, backup inputs and protection arrangements need an agreed compatibility schedule.
Cast iron, stainless steel, polymer hydraulic parts, impeller type and seal materials are selected for the duty. A water pump, a sewage unit and a chemical-process package require different checks.
Bring artwork, reference samples and a target cost. The available process, minimum quantity, sample charges and development scope are reviewed for the chosen option.
Request the required phase, voltage, frequency, starting method, ports, cable length, tank or controller arrangement. Feasibility and commercial terms are confirmed for the selected product.
Send artwork, label language, manuals, packaging and test-sample requirements. Private-label feasibility, minimum quantity, sample cost and development work require a specific offer.
Specify retail carton, transport protection, spare-parts pack and shipment plan. Published carton dimensions are configuration references; container quantities do not establish MOQ or guaranteed loading.
Agree which product characteristics need testing and how the approved sample relates to the bulk order.
Agree the duty point, curve, power, frequency and phase. Review suction lift or immersion, fluid and ambient temperature, inlet pressure, motor protection and controller limits independently.
Set the required performance, leakage, electrical and dimensional checks, sampling plan and acceptance records in the order. Factory test equipment or group capabilities do not replace a product-specific report.
Declare corrosiveness, pH, solids size and concentration, fibres, sand and temperature. Drinking water, food contact, hazardous areas and fire-water installations require explicit materials and valid destination-specific evidence.
Test capability is a starting point for the inspection plan. Request the method, applicable model and results needed for your order.
Document requirements are part of the buying specification. Request records for the exact configuration, manufacturer and destination before confirming compliance.
State the sales market, intended users and required files in your first enquiry. Current validity and scope are checked for the selected supplier and product; a category description does not certify every item.
Share your document requirements ↗Your sales channel changes the assortment, packaging and quality priorities. Tell us the intended use as well as the product name.
Domestic supply, pressure boosting, hot-water and heating circulation, cooling, filtration and water-treatment integration.
Well lifting, solar irrigation, rainwater use, pond circulation, portable pumping, lawn care and garden cultivation.
Drainage, sewage treatment, construction dewatering, cooling-water schemes and fluid-specific industrial process duties.
Samples, commercial terms and responsibilities are agreed for the project. Use the same product and packing specification when comparing quotations.
Product, reference image, quantity, sales market and timing.
Review configuration, materials, sample scope and relevant documents.
Agree artwork, packaging, sample, testing and inspection criteria.
Set price, payment, production, delivery and defect remedies in writing.
Practical answers about this sourcing direction, customization and the reference options. Your agreed specification and written quotation determine the actual order.
Provide the required flow at total head, fluid, static and dynamic water levels, suction pipe, operating hours, site altitude and electrical supply. A photo or installation sketch helps define connections and clearance.
No. They normally occur at different points on a curve. State the flow required at your operating head so the matched curve can be checked.
It is a flow and head value read at one nonzero point on the same configuration curve, using the units in the heading. It is a comparison reference, not a system guarantee.
State daily water demand, total head, well details, available sunlight, array layout and backup preference. Motor rating, controller input and array open-circuit voltage must each be checked.
No. The selected controller, source switching, electrical protection and installation instructions must govern the connection. Send the intended AC supply and PV array data.
No. Immersion describes a submerged installation; suction lift concerns a surface pump drawing from a lower level. Specify the actual arrangement and keep the relevant limit with its configuration.
Only a configuration assessed for that liquid should be selected. Report particle size, concentration, fibres and abrasiveness. A small particle allowance does not establish sewage or slurry suitability.
No. Alloy, seal, wetted components, cleaning conditions and any required contact approvals must be confirmed for the exact product and destination.
Confirm the exact motor and hydraulic data for the intended frequency and voltage. Frequency-specific curves must not be substituted with another electrical version.
Submit pressure settings, tank volume, operating pattern, dry-run protection and sensor requirements. We can request a matched package and confirm which components are included.
Approvals depend on the model, configuration and destination. Provide the designer specification and required approval schedule before selection.
They require a project enquiry covering fluid, temperature, pressure, duty point, materials, seals, installation and documentation. Manufacturing source and current availability must be confirmed for that package.
No. A permanent-magnet motor describes the motor technology. If a magnetic-drive or vibration pump is required, identify that construction explicitly for a separate feasibility review.
State the exact configuration and trial purpose. Sample availability, quantity, price, inspection and freight are confirmed in the offer.
They depend on configuration, branding, electrical version, order quantity and production availability. Request a written schedule for the selected package.
Send artwork, language, carton, barcode and spare-parts requirements. Adaptation is subject to technical review, permission and an agreed quotation.
Include the duty point, liquid, suction pipe, site access and preferred fuel type. Engine configuration, consumables, emissions requirements and service-parts support must be confirmed.
State cutting width, terrain, collection or mulching preference, push or powered drive, starting method and storage needs. For battery mowers, confirm the current battery and charger system before ordering.
Specify working width, soil conditions, access, desired protection discs, engine cover and service-parts needs. Published depth is a configuration reference and actual cultivation depends on conditions.
Send the selected configuration and a parts schedule. Impellers, seals, floats, controllers, cables, engine consumables and garden-machine wear parts need compatibility confirmation.
No. Carton and container figures are logistics references. Confirm the ordered assembly, carton specification, weight and loading plan separately.
List the current technical sheet, curve, drawings, manuals, test records and destination documents needed for your order. Availability and applicable scope are confirmed before commitment.
Factory Sourcing Hub handles this enquiry as an independent sourcing and trading service. The product route, supplier suitability, sample scope and order responsibilities are agreed for the actual project.
Send the product reference, quantities per variation, customization and packaging. Prices, minimums, sample charges and delivery dates are confirmed in a current quotation; the page is not a live inventory or price feed.
Yes. State whether you need a reference sample, a customized sample or development work. Agree the sample cost and shipping, approval specification, inspection plan and remedy for non-conforming goods before the bulk order.
Reference images, drawings, logo artwork and a product list are useful. Include quantities, the intended users and sales market, packaging, required documents and timing. After submitting the form, email attachments to kunhuow@gmail.com with your enquiry reference.
A reference picture or a short description is enough to begin. Add the details you already know; the optional fields help make the follow-up more useful.
Download the enquiry checklist ↓
Independent sourcing and trading service. Supplier choice, service costs and order conditions are discussed for your project.
Product selection, customization, samples and quotation enquiries.
Information basis: published product information reviewed . Reference details support a sourcing discussion. Current supply, samples and product-specific documents are confirmed for the selected item.