Metal drilling and hole machining
Twist, step, countersink, centre, spot, PCB micro, solid-carbide, deep-hole, replaceable-head and annular cutters use distinct substrates, point geometries and holder interfaces.
Enquire about this range ↗METAL · WOOD · STONE · THREADING · ABRASIVES · TOOL ASSORTMENTS
Cut, Drill, Shape & Finish Tools Matched to the Work
Cutting, Drilling, Abrasive & Workshop Tool Sourcing
Source cutting and drilling tools, taps, mills, inserts, wood and masonry cutters, diamond tools, abrasives, polishing systems, hand tools and configured assortments.
- Industrial metal cutting and threading through woodworking and construction consumables
- Distinct material, geometry, coating, size and holder combinations
- Retail assortments, sample review, packaging and inspection coordination
Manufacturing, product documents and order conditions depend on the model and supply route selected for your project.
Start with a product reference, intended use and estimated quantity. We bring product selection, sample questions and quotation details into one conversation.
Email your reference image ↗Metal machiningHSS/carbide drills, mills, reamers, taps, dies, inserts and superhard tools
Wood and constructionPanel, router, boring, saw, masonry, diamond and chiselling directions
Surface finishingCut/grind, paper/mesh, flap, brush, foam/wool/cloth and compound systems
Order planningSelected dimensions, substrate, holder, pack bill, branding and destination
Explore the product range
Build the range
your buyers need.
Choose a focused product or discuss a coordinated assortment. Each direction can be developed into a more specific model and packaging brief.
Milling, turning and reaming
HSS and carbide square, ball, corner-radius, taper, roughing, micro and aluminium mills combine with reamers, rotary burrs, tool bits, drill blanks, turning/milling/grooving/thread inserts and superhard cutting directions.
Enquire about this range ↗Thread cutting, forming and repair
HSSE, powder-HSS and carbide taps include metric and inch, spiral-point, spiral, straight, forming, long-shank and coolant directions. Dies, thread mills, wire-insert installation, repair and combination drilling/tapping tools are separate options.
Enquire about this range ↗Construction drilling and demolition
Masonry, glass, tile, multi-material, hammer and tricone drilling directions sit alongside chisels, floor scrapers, ground-rod drivers, hollow cores and construction hole-making accessories.
Enquire about this range ↗Diamond and abrasive stone tools
Hot-pressed, laser-welded, brazed and electroplated structures cover discs, cores, mounted heads, cup wheels, engraving, grout cleaning, chamfering, bullnose/profile wheels and diamond wire.
Enquire about this range ↗Wood and panel production cutters
PCD and carbide saws, scoring/dado sets, boring and hinge drills, router/profile/engraving tools, spiral planer heads, reversible knives and replaceable pre-milling cutters address furniture and panel workflows.
Enquire about this range ↗Wood drilling, sawing and assembly
Brad-point, auger, spade, Forstner, formwork, plug and tenon cutters combine with hole saws, arbors, countersink stops, pull saws, reciprocating/jigsaw blades and carving/turning tools.
Enquire about this range ↗Oscillating multi-tool consumables
HCS, HSS, M2/M42 bi-metal, titanium-treated, carbide and diamond directions include plunge, segment, round, scraper, rasp and sanding-support forms. Closed/open and quick-change fittings require an exact machine match.
Enquire about this range ↗Industrial and automotive abrasives
Resin cut/grind wheels, CBN/diamond wheels, fibre/flap/strip discs, cloth/paper/mesh, sponge, belts, drums, stones and mounted points cover separate removal and finishing tasks.
Enquire about this range ↗Polishing, brushes and accessory systems
Foam, wool, cloth and non-woven media combine with backers, cushions, threaded plates, wire/nylon/abrasive bristles, compounds and wax. Hole patterns, hardness, grade and attachments remain item-specific.
Enquire about this range ↗Holding, driving and hand tools
Drill/lathe chucks, centres, adaptors, driver bits, holders, sockets, punches, pliers, screwdrivers, spanners, clamps, hammers, axes, garden/striking/digging tools and their handle directions extend the purchasing range.
Enquire about this range ↗Assortments and packaging
Metal, masonry, wood, abrasive, driver and mixed tool packs support selected component bills, cases, hanging clips, sleeves, retail packs and carton layouts. Exact quantities and substitutions need pack approval.
Enquire about this range ↗Reference product directions
Start with a product.
Define the details.
Use these options to describe what you are buying. The public references identify your enquiry; the final model and specification are confirmed before an order.
REFERENCE 0307-01
Spiral-flute TiN HSS countersink assortment
A six-tool metal-deburring assortment uses spiral flutes with a curved chip groove. Low-speed countersinking is the stated use direction.
- Countersink angle
- 90°
- Sizes
- 6.3, 8.3, 10.4, 12.4, 16.5, 20.5 mm
REFERENCE 0307-02
Three-flute step-drill assortment
M2 high-speed steel, TiN treatment and a CNC-ground three-flute construction form this step-drill set.
- Range options
- 4–12; 4–20; 4–30 mm
- Set
- 3 pieces
REFERENCE 0307-03
Milling insert cutting reference
A milling insert direction includes work-material group M cutting references. Confirm the insert geometry and grade with the workpiece.
- Cutting speed Vc
- 120 m/min; stated range 100–160 m/min
- Feed per tooth fz
- 0.20 mm/tooth; stated range 0.10–0.25 mm/tooth
REFERENCE 0307-04
Thread-turning inserts
Select the external/internal thread profile and work material before choosing a chipbreaker and grade.
- Vc for material group P
- 120 m/min; range 70–180
- Vc for material group M
- 110 m/min; range 70–170
- Vc for material group K
- 110 m/min; range 80–160
REFERENCE 0307-05
Parting and grooving inserts
A grooving and parting direction provides separate X- and Z-direction feed references.
- Cutting speed Vc
- 130 m/min; range 50–200
- X feed fnx
- 0.08 mm/rev; range 0.05–0.18
- Z feed fnz
- 0.10 mm/rev; range 0.05–0.20
REFERENCE 0307-06
Steel-turning insert cutting reference
Review the insert seat and cutting conditions for steel turning.
- Vc
- 200 m/min; range 120–260
- Depth of cut ap
- 2.50 mm; range 1.20–4.00
- Feed f
- 0.30 mm/rev; range 0.20–0.45
REFERENCE 0307-07
Black-and-gold M2 twist drills
M2 HSS, a round shank, split point and two chip flutes distinguish this non-ferrous-metal drill direction.
- Point angle
- 135°
REFERENCE 0307-08
Carbide composite drills
A K10 carbide direction is intended for carbon-fibre/composite hole making. Agree the dimension order on the drawing.
- Size references
- 2.6/3/4/5/6 × 50 × 150 mm
REFERENCE 0307-09
Resin-bonded superabrasive grinding discs
Select diamond or CBN abrasive for the actual workpiece, bond and tool setup; approve the ordered abrasive composition and marked speed.
- Dimensions and configurations
6 listed configurations · view dimensions
Dia | Inner hole | high diamond coating | teeth thick — verify units and ordered drawing Dia Inner hole high diamond coating teeth thick 3.150" 0.63 0.25 0.125 3.150" 0.63 0.25 0.1875 3.150" 0.63 0.125 0.25 5.750" 0.875 0.25 0.125 4.125" 0.875 0.25 0.125 4.125" 0.875 0.25 0.1875
REFERENCE 0307-10
Electroplated superabrasive grinding discs
Select diamond or CBN abrasive for the actual workpiece, bond and tool setup; approve the ordered abrasive composition and marked speed.
- Dimensions and configurations
6 listed configurations · view dimensions
Dia | Inner hole | high diamond coating | teeth thick — verify units and ordered drawing Dia Inner hole high diamond coating teeth thick 3.150" 0.63 0.25 0.125 3.150" 0.63 0.25 0.1875 3.150" 0.63 0.125 0.25 5.750" 0.875 0.25 0.125 4.125" 0.875 0.25 0.125 4.125" 0.875 0.25 0.1875
REFERENCE 0307-11
Fully ground elongated twist drills
Ground web, flutes, lands and margins accompany an elongated cutting section. Match cutting and overall length independently.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-12
Two-flute ball-nose carbide end mills
A ball-nose direction serves contour and profile milling.
- Radius range
- R0.1–6 mm
- Overall length range
- 40–75 mm
REFERENCE 0307-13
Two-flute square end mills
A two-flute square-ended direction for slot and shoulder milling.
- Diameter range
- 1–12 mm
- Length range
- 40–75 mm
REFERENCE 0307-14
Four-flute square end mills
A four-flute square-ended alternative for the agreed work material and chip load.
- Diameter range
- 1–12 mm
- Length range
- 40–75 mm
REFERENCE 0307-15
Four-flute radius end mills
Corner-radius geometry differs from square and ball-nose tools.
- Diameter range
- 1–12 mm
- Length range
- 45–100 mm
REFERENCE 0307-16
Two-flute ball-nose tools for hardened workpieces
A coated ball-nose direction is described for hardened-steel machining. Agree steel grade, hardness and trial conditions.
- Application reference
- Hardened steel up to 65 HRC; application selection requires confirmation
REFERENCE 0307-17
Long-neck small-radius ball end mills
A relieved long neck provides clearance for deep mould and narrow-rib work.
- Radius/length reference
- R0.1–0.4 × 50 mm
- Flutes
- 4
- Application reference
- Hardened-steel direction up to 65 HRC, subject to machining review
REFERENCE 0307-18
Four-flute high-helix square end mills
A four-flute square cutter uses a high helix; lengths are paired with the actual diameter option.
- Helix
- 45°
- Diameter × length options
- 2/2.5/3/4/5/6 × 60; 7/7.5 × 70; 8 × 75; 10 × 90; 12 × 100; 16 × 110; 20 × 130 mm
REFERENCE 0307-19
Three-cutter solid-carbide-tip hammer drills
Solid carbide tips are joined by an electric-resistance brazing process. Confirm the hammer interface and material.
- Interface
- SDS-plus
- Diameter range
- 4–16 mm
- Length range
- 110–600 mm
REFERENCE 0307-20
Cross-tip solid-carbide-tip hammer drills
A cross-tip alternative uses electric-resistance brazing; select the actual cutting and overall length.
- Interface
- SDS-plus
- Diameter range
- 4–16 mm
- Length range
- 110–600 mm
REFERENCE 0307-21
DIN8035 SDS-max shank hammer drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
45 listed configurations · view dimensions
Dia. | Oal. — verify units and ordered drawing Dia. Oal. 12 370 14 370 16 370 18 370 20 370 22 370 25 370 28 370 30 370 32 370 35 370 38 370 40 370 12 570 14 570 16 570 18 570 20 570 22 570 25 570 28 570 30 570 32 570 35 570 38 570 40 570 12 920 14 920 16 920 18 920 20 920 22 920 25 920 28 920 30 920 32 920 35 920 38 920 40 920 20 1320 22 1320 25 1320 28 1320 30 1320 32 1320
REFERENCE 0307-22
DIN8035 SDS plus shank hammer drill crosscut professional
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
172 listed configurations · view dimensions
Dia. | Oal. — verify units and ordered drawing Dia. Oal. 5 110 5.5 110 6 110 6.5 110 7 110 8 110 9 110 10 110 11 110 12 110 13 110 14 110 4 160 5.5 160 6 160 6.5 160 7 160 8 160 9 160 10 160 11 160 12 160 13 160 14 160 15 160 16 160 17 200 18 200 20 200 22 200 23 200 24 200 25 200 26 200 5 210 5.5 210 6 210 6.5 210 7 210 8 210 9 210 10 210 11 210 12 210 13 210 14 210 15 210 16 210 18 210 19 210 20 210 22 210 23 210 24 210 25 210 26 210 22 250 24 250 25 250 6 260 8 260 9 260 10 260 11 260 12 260 13 260 14 260 15 260 16 260 18 260 19 260 20 260 22 260 23 260 24 260 25 260 26 260 18 300 19 300 20 300 11 310 12 310 13 310 14 310 15 310 16 310 18 310 20 310 22 310 24 310 25 310 26 310 8 350 10 350 11 350 12 350 13 350 14 350 16 350 18 350 20 350 22 350 23 350 24 350 25 350 26 350 28 350 10 400 11 400 12 400 13 400 14 400 16 400 18 400 20 400 22 400 23 400 24 400 25 400 26 400 28 400 30 400 8 450 10 450 11 450 12 450 13 450 14 450 16 450 18 450 20 450 22 450 23 450 24 450 25 450 26 450 28 450 16 500 20 500 23 600 24 600 25 600 26 600 28 600 22 800 23 800 24 800 25 800 26 800 27 800 28 800 29 800 30 800 10 1000 11 1000 12 1000 13 1000 14 1000 15 1000 16 1000 17 1000 18 1000 19 1000 20 1000 23 1000 24 1000 25 1000 26 1000 27 1000 28 1000 29 1000 30 1000
REFERENCE 0307-23
DIN8035 SDS plus shank hammer drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
97 listed configurations · view dimensions
Dia. | Oal. — verify units and ordered drawing Dia. Oal. 4 110 5 110 5.5 110 6 110 6.5 110 7 110 8 110 9 110 10 110 5 160 6 160 6.5 160 7 160 8 160 9 160 10 160 11 160 12 160 13 160 14 160 15 160 16 160 5.5 210 6 210 6.5 210 7 210 8 210 9 210 10 210 11 210 12 210 13 210 14 210 15 210 16 210 18 210 20 210 6 260 7 260 8 260 10 260 11 260 12 260 13 260 14 260 15 260 16 260 18 260 20 260 22 260 24 260 25 260 26 260 8 310 10 310 12 310 13 310 14 310 16 310 18 310 20 310 10 360 12 360 14 360 16 360 18 360 20 360 8 450 10 450 12 450 14 450 16 450 18 450 20 450 22 450 24 450 25 450 26 450 8 600 10 600 14 600 16 600 18 600 20 600 22 600 24 600 25 600 10 1000 12 1000 14 1000 16 1000 18 1000 20 1000 22 1000 24 1000 25 1000 26 1000
REFERENCE 0307-24
Diamond vacuum brazed disc for metal
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 105x5x22.23; 110x5x22.23; 115x5x22.23; 125x5x22.23; 180x5x22.23; 230x5x22.23
REFERENCE 0307-25
Diamond disc Turbo mesh type with flange
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
6 listed configurations · view dimensions
Dia. mm | Inner hole — verify units and ordered drawing Dia. mm Inner hole 105 20 115 22.23 125 22.23 230 22.23 200 25.4 250 25.4
REFERENCE 0307-26
Diamond rope saw
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
2 listed configurations · view dimensions
Dia | Beads/m | Length — verify units and ordered drawing Dia Beads/m Length 8.2 37 3.6 8.8 37 3.6
REFERENCE 0307-27
Diamond core drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dia.x length — verify units and ordered drawing
- 38x150; 52x150; 65x150; 117x150; 127x150; 152x180; 22x400; 25x400; 32x400; 38x400; 44x400; 50x400; 57x400; 63x400; 65x400; 75x400; 90x400; 100x400; 110x400; 115x400; 120x400; 125x400; 150x400; 160x400; 180x400; 200x400; 230x400
REFERENCE 0307-28
diamond disc Continues
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Construction / finish choices
- Sintered; Hot pressed; confirm availability for each size
- Dimensions and configurations
10 listed configurations · view dimensions
Dia. | Hole | T/T | T/H — verify units and ordered drawing Dia. Hole T/T T/H 105 20 1.6 5 110 20 1.8 5 115 22.23 2.0 5 125 22.23 2.0 5 150 22.23 2.2 5 200 22.23 2.4 5 230 22.23 2.6 5 250 25.4 2.8 5 300 25.4 3.0 6 350 25.4 3.2 6
REFERENCE 0307-29
diamond disc Reinforced turbo
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
9 listed configurations · view dimensions
Dia. | Hole | T/T | T/H — verify units and ordered drawing Dia. Hole T/T T/H 105 20 2.6 7 110 20 2.6 7 115 22.23 2.6 7 125 22.23 2.8 7 150 22.23 3.0 7 180 22.23 3.0 7 200 22.23 3.0 7 230 22.23 3.2 7 250 25.4 3.2 7
REFERENCE 0307-30
Diamond disc general purpose with aluminum flange
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
4 listed configurations · view dimensions
Dia. | hole — verify units and ordered drawing Dia. hole 115 22.2 125 22.2 180 22.2 230 22.2
REFERENCE 0307-31
Three-edge SDS-plus hammer drills
A three-edge tip direction differs from the standard and solid-cross alternatives.
- Diameter range
- 5–30 mm
- Overall length range
- 110–1000 mm
- Standard reference
- DIN 8035
REFERENCE 0307-32
SDS-plus rotary hammer drills
Select the actual diameter/length combination and tip geometry.
- Diameter range
- 5–30 mm
- Overall length range
- 110–1000 mm
- Standard reference
- DIN 8035
REFERENCE 0307-33
Solid-cross SDS-plus hammer drills
A solid cross-tip direction for matched rotary-hammer work.
- Diameter range
- 4–25 mm
- Overall length range
- 110–450 mm
REFERENCE 0307-34
SDS-plus hex hammer drills
A hex-body hammer-drill direction; confirm fitting and working-length drawing.
- Diameter options
- 4.0 or 4.8 mm
- Overall / working length reference
- 182 / 100; confirm dimension unit
REFERENCE 0307-35
SDS plus shank chisel
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
9 listed configurations · view dimensions
Dia.x L1 Oal | shank | type — verify units and ordered drawing Dia.x L1 Oal shank type 3.2x250 H14 Point 20x250 H14 Flat 40x250 H14 Cold 22x26x250 H14 Hollow 22x250 H14 Cranked gouge 22x250 H14 Winged 27x250 H14 Toothed 40x260 H14 Tile 75x180 H14 Cutting
REFERENCE 0307-36
Self-sharpening spade chisels
A wide spade chisel direction for a matched rotary hammer.
- Interface
- SDS-plus
- Size
- 40 × 250 mm
REFERENCE 0307-37
Jackhammer chisels
A 40Cr steel chisel direction; match the actual machine fitting.
- Size
- 225 × 50.80 mm
- Material
- 40Cr
REFERENCE 0307-38
Hex-fitting chisels
A 40Cr steel chisel direction with a hexagonal fitting.
- Size
- 277 × 50.80 mm
- Material
- 40Cr
REFERENCE 0307-39
Diamond disc for granite with aluminum flange
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
4 listed configurations · view dimensions
Dia. | hole — verify units and ordered drawing Dia. hole 115 22.2 125 22.2 180 22.2 230 22.2
REFERENCE 0307-40
diamond disc Segmented
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
11 listed configurations · view dimensions
Dia. | Hole | T/T | T/H — verify units and ordered drawing Dia. Hole T/T T/H 105 20 1.8 7 110 20 1.8 7 115 22.23 2 7 125 22.23 2 7 150 22.23 2.2 7 180 22.23 2.4 7 200 22.23 2.4 7 230 22.23 2.6 7 250 25.4 2.8 7 300 25.4 3 7 350 25.4 3.2 7
REFERENCE 0307-41
diamond disc Turbo
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
11 listed configurations · view dimensions
Dia. | Hole | T/T | T/H — verify units and ordered drawing Dia. Hole T/T T/H 105 20 2.6 7 110 20 2.6 7 115 22.23 2.6 7 125 22.23 2.8 7 150 22.23 3.0 7 180 22.23 3.0 7 200 22.23 3.2 7 230 22.23 3.4 7 250 25.4 3.4 7 300 25.4 3.6 7 350 25.4 3.6 7
REFERENCE 0307-42
Diamond disc hot press
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-43
Optimun distribution diamond disc
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
18 listed configurations · view dimensions
Dia. | hole | No.of blade | blade height — verify units and ordered drawing Dia. hole No.of blade blade height 300 25.4 20 10 350 25.4 24 10 400 25.4 28 10 450 25.4 32 10 500 25.4 36 10 600 25.4 40 10 300 25.4 20 12 350 25.4 24 12 400 25.4 28 12 450 25.4 32 12 500 25.4 36 12 600 25.4 40 12 300 25.4 21 13 350 25.4 25 13 400 25.4 28 13 450 25.4 32 13 500 25.4 36 13 600 25.4 40 13
REFERENCE 0307-44
HSS annular cutter ( 19mm（3/4”）Weldon shank )
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
98 listed configurations · view dimensions
Dia. | Cutting | Oal — verify units and ordered drawing Dia. Cutting Oal 12.0mm 35mm 63mm 13.0 35 63 14.0 35 63 15.0 35 63 16.0 35 63 17.0 35 63 18.0 35 63 19.0 35 63 20.0 35 63 21.0 35 63 22.0 35 63 23.0 35 63 24.0 35 63 25.0 35 63 26.0 35 63 27.0 35 63 28.0 35 63 29.0 35 63 30.0 35 63 31.0 35 63 32.0 35 63 33.0 35 63 34.0 35 63 35.0 35 63 36.0 35 63 37.0 35 63 38.0 35 63 39.0 35 63 40.0 35 63 41.0 35 63 42.0 35 63 43.0 35 63 44.0 35 63 45.0 35 63 46.0 35 63 47.0 35 63 48.0 35 63 49.0 35 63 50.0 35 63 51.0 35 63 52.0 35 63 53.0 35 63 54.0 35 63 55.0 35 63 56.0 35 63 57.0 35 63 58.0 35 63 59.0 35 63 60.0 35 63 12.0mm 50mm 88mm 13.0 50 88 14.0 50 88 15.0 50 88 16.0 50 88 17.0 50 88 18.0 50 88 19.0 50 88 20.0 50 88 21.0 50 88 22.0 50 88 23.0 50 88 24.0 50 88 25.0 50 88 26.0 50 88 27.0 50 88 28.0 50 88 29.0 50 88 30.0 50 88 31.0 50 88 32.0 50 88 33.0 50 88 34.0 50 88 35.0 50 88 36.0 50 88 37.0 50 88 38.0 50 88 39.0 50 88 40.0 50 88 41.0 50 88 42.0 50 88 43.0 50 88 44.0 50 88 45.0 50 88 46.0 50 88 47.0 50 88 48.0 50 88 49.0 50 88 50.0 50 88 51.0 50 88 52.0 50 88 53.0 50 88 54.0 50 88 55.0 50 88 56.0 50 88 57.0 50 88 58.0 50 88 59.0 50 88 60.0 50 88
REFERENCE 0307-45
HSS Annular cutter ( One - touch shank )
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
98 listed configurations · view dimensions
Dia. | Cutting | Oal — verify units and ordered drawing Dia. Cutting Oal 12.0mm 35mm 63mm 13.0 35 63 14.0 35 63 15.0 35 63 16.0 35 63 17.0 35 63 18.0 35 63 19.0 35 63 20.0 35 63 21.0 35 63 22.0 35 63 23.0 35 63 24.0 35 63 25.0 35 63 26.0 35 63 27.0 35 63 28.0 35 63 29.0 35 63 30.0 35 63 31.0 35 63 32.0 35 63 33.0 35 63 34.0 35 63 35.0 35 63 36.0 35 63 37.0 35 63 38.0 35 63 39.0 35 63 40.0 35 63 41.0 35 63 42.0 35 63 43.0 35 63 44.0 35 63 45.0 35 63 46.0 35 63 47.0 35 63 48.0 35 63 49.0 35 63 50.0 35 63 51.0 35 63 52.0 35 63 53.0 35 63 54.0 35 63 55.0 35 63 56.0 35 63 57.0 35 63 58.0 35 63 59.0 35 63 60.0 35 63 12.0mm 50mm 88mm 13.0 50 88 14.0 50 88 15.0 50 88 16.0 50 88 17.0 50 88 18.0 50 88 19.0 50 88 20.0 50 88 21.0 50 88 22.0 50 88 23.0 50 88 24.0 50 88 25.0 50 88 26.0 50 88 27.0 50 88 28.0 50 88 29.0 50 88 30.0 50 88 31.0 50 88 32.0 50 88 33.0 50 88 34.0 50 88 35.0 50 88 36.0 50 88 37.0 50 88 38.0 50 88 39.0 50 88 40.0 50 88 41.0 50 88 42.0 50 88 43.0 50 88 44.0 50 88 45.0 50 88 46.0 50 88 47.0 50 88 48.0 50 88 49.0 50 88 50.0 50 88 51.0 50 88 52.0 50 88 53.0 50 88 54.0 50 88 55.0 50 88 56.0 50 88 57.0 50 88 58.0 50 88 59.0 50 88 60.0 50 88
REFERENCE 0307-46
TCT Annular cutter ( 19mm（3/4”）Weldon shank )
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
98 listed configurations · view dimensions
Dia. | Cutting | No.of teeth — verify units and ordered drawing Dia. Cutting No.of teeth 12.0 25 4 13.0 25 4 14.0 25 4 15.0 25 4 16.0 25 5 17.0 25 5 18.0 25 5 19.0 25 5 20.0 25 6 21.0 25 6 22.0 25 6 23.0 25 6 24.0 25 6 25.0 25 6 26.0 25 7 27.0 25 7 28.0 25 7 29.0 25 8 30.0 25 8 31.0 25 8 32.0 25 8 33.0 25 8 34.0 25 8 35.0 25 9 36.0 25 9 37.0 25 9 38.0 25 10 39.0 25 10 40.0 25 10 41.0 25 10 42.0 25 12 43.0 25 12 44.0 25 12 45.0 25 12 46.0 25 12 47.0 25 12 48.0 25 12 49.0 25 12 50.0 25 12 51.0 25 12 52.0 25 12 53.0 25 12 54.0 25 12 55.0 25 13 56.0 25 13 57.0 25 13 58.0 25 13 59.0 25 13 60.0 25 13 12.0 50 4 13.0 50 4 14.0 50 4 15.0 50 4 16.0 50 5 17.0 50 5 18.0 50 5 19.0 50 5 20.0 50 6 21.0 50 6 22.0 50 6 23.0 50 6 24.0 50 6 25.0 50 6 26.0 50 7 27.0 50 7 28.0 50 7 29.0 50 8 30.0 50 8 31.0 50 8 32.0 50 8 33.0 50 8 34.0 50 8 35.0 50 9 36.0 50 9 37.0 50 9 38.0 50 10 39.0 50 10 40.0 50 10 41.0 50 10 42.0 50 12 43.0 50 12 44.0 50 12 45.0 50 12 46.0 50 12 47.0 50 12 48.0 50 12 49.0 50 12 50.0 50 12 51.0 50 12 52.0 50 12 53.0 50 12 54.0 50 12 55.0 50 13 56.0 50 13 57.0 50 13 58.0 50 13 59.0 50 13 60.0 50 13
REFERENCE 0307-47
TCT Annular cutter ( One - touch shank )
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
98 listed configurations · view dimensions
Dia. | Cutting | No.of teeth — verify units and ordered drawing Dia. Cutting No.of teeth 12.0 35 4 13.0 35 4 14.0 35 4 15.0 35 4 16.0 35 5 17.0 35 5 18.0 35 5 19.0 35 5 20.0 35 6 21.0 35 6 22.0 35 6 23.0 35 6 24.0 35 6 25.0 35 6 26.0 35 7 27.0 35 7 28.0 35 7 29.0 35 8 30.0 35 8 31.0 35 8 32.0 35 8 33.0 35 8 34.0 35 8 35.0 35 9 36.0 35 9 37.0 35 9 38.0 35 10 39.0 35 10 40.0 35 10 41.0 35 10 42.0 35 12 43.0 35 12 44.0 35 12 45.0 35 12 46.0 35 12 47.0 35 12 48.0 35 12 49.0 35 12 50.0 35 12 51.0 35 12 52.0 35 12 53.0 35 12 54.0 35 12 55.0 35 13 56.0 35 13 57.0 35 13 58.0 35 13 59.0 35 13 60.0 35 13 12.0 50 4 13.0 50 4 14.0 50 4 15.0 50 4 16.0 50 5 17.0 50 5 18.0 50 5 19.0 50 5 20.0 50 6 21.0 50 6 22.0 50 6 23.0 50 6 24.0 50 6 25.0 50 6 26.0 50 7 27.0 50 7 28.0 50 7 29.0 50 8 30.0 50 8 31.0 50 8 32.0 50 8 33.0 50 8 34.0 50 8 35.0 50 9 36.0 50 9 37.0 50 9 38.0 50 10 39.0 50 10 40.0 50 10 41.0 50 10 42.0 50 12 43.0 50 12 44.0 50 12 45.0 50 12 46.0 50 12 47.0 50 12 48.0 50 12 49.0 50 12 50.0 50 12 51.0 50 12 52.0 50 12 53.0 50 12 54.0 50 12 55.0 50 13 56.0 50 13 57.0 50 13 58.0 50 13 59.0 50 13 60.0 50 13
REFERENCE 0307-48
Adaptor (Arbor extension for Weldon shank)
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- size — verify units and ordered drawing
- 25; 50; 75; 100
REFERENCE 0307-49
Adaptor (MT shank to Weldon shank)
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
9 listed configurations · view dimensions
size | Cutting depth | Adaptable | Type — verify units and ordered drawing size Cutting depth Adaptable Type MT2x50x19.05 50 19.05mm(3/4”) Morse 2 MT3x50x19.05 50 19.05mm(3/4”) Morse 3 MT3x75x19.05 75 19.05mm(3/4”) Morse 3 MT3x100x19.05 100 19.05mm(3/4”) Morse 3 MT4x50x19.05 50 19.05mm(3/4”) Morse 4 MT4x75x19.05 75 19.05mm(3/4”) Morse 4 MT4x100x19.05 100 19.05mm(3/4”) Morse 4 MT5x75x19.05 75 19.05mm(3/4”) Morse 5 MT5x100x19.05 100 19.05mm(3/4”) Morse 5
REFERENCE 0307-50
Adaptor (Weldon shank to Threaded shank)
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Description — verify units and ordered drawing
- Adaptor with Weldon shank 3/4”
REFERENCE 0307-51
Adaptor (Thread shank to Weldon shank)
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Description — verify units and ordered drawing
- Adaptor with thread retainer M18x6 P1.5 for core drills with Weldon shank 3/4”
REFERENCE 0307-52
Adaptor (One-touch shank to Threaded shank)
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
2 listed configurations · view dimensions
Description | Unlabelled dimension — verify units and ordered drawing Description Unlabelled dimension Adaptor with One-touch shank Adaptor with One-touch shank for core drills with thread retainer M18x6 P1.5 for core drills with thread retainer M18x6 P1.5
REFERENCE 0307-53
Adaptor (One-touch shank to Weldon shank)
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
2 listed configurations · view dimensions
Description | Unlabelled dimension — verify units and ordered drawing Description Unlabelled dimension Adaptor with One-touch shank Adaptor with One-touch shank for core drills with Weldon shank 3/4” for core drills with Weldon shank 3/4”
REFERENCE 0307-54
Adaptor ( Quick-In shank to Weldon shank)
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
2 listed configurations · view dimensions
Description | Unlabelled dimension — verify units and ordered drawing Description Unlabelled dimension Adaptor with Quick-In shank Adaptor with Quick-In shank for core drills with Weldon shank 3/4” for core drills with Weldon shank 3/4”
REFERENCE 0307-55
Pilot pins for annular cutter
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
25 listed configurations · view dimensions
Size | Type — verify units and ordered drawing Size Type 6.35x77 straight shank 6.35x90 straight shank 6.35x103 straight shank 6.35x130 straight shank 7.98x77 straight shank 7.98x90 straight shank 7.98x103 straight shank 7.98x130 straight shank 7.98x155 straight shank 7.98x162 straight shank 6.35x77x4.5 step 6.35x90x4.5 step 6.35x103x4.5 step 6.35x130x4.5 step 7.98x77x5.2 step 7.98x90x5.2 step 7.98x103x5.2 step 7.98x130x5.2 step 7.98x155x6.8 step 7.98x162x6.8 step 6.35x77 thread 6.35x90 thread 6.35x103 thread 6.35x130 thread 6.35x155 thread
REFERENCE 0307-56
PCD-tipped board saw blades
A polycrystalline-diamond tip direction for building/wood-based boards uses a noise/vibration-oriented blade structure. Check the actual substrate and tooth pattern.
- Outer diameter / bore / teeth
- 305 mm / 30 mm / 96T
- Options
- Custom geometry and size can be reviewed
REFERENCE 0307-57
PCD-tipped fibre-cement saw blades
PCD teeth serve a separate fibre-cement and hard-board cutting direction. Match machine and extraction arrangements.
- Diameter / bore / teeth options
- 115 / 10 mm / 4T; 165 / 15.88 mm / 4T; 184 / 15.88 mm / 4T or 5T; 254 / 15.88 mm / 6T or 12T
REFERENCE 0307-58
Left/right PCD laminate saw blades
Paired left/right cutting directions are offered for panel work. The metric bore is the quotation reference; confirm the drawing.
- Outer diameter
- 300 mm
- 30 mm bore
- 46T, left or right
- 80 mm bore
- 64T, left or right
REFERENCE 0307-59
Woodworking carbide-tipped circular saws
Carbide-tipped blades for crosscutting soft and hardwood are selected by the actual diameter/tooth-count combination.
- Diameter mm : teeth
- 115/136/140 : 18/24/36; 150/165 : 18/24/40; 184/200/210/215 : 24/40/60; 254 : 32/40/60/80; 305/350 : 80/100/120
REFERENCE 0307-60
Flap disc for Aluminum
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
20 listed configurations · view dimensions
Dia. | Inner hole | No. pcs — verify units and ordered drawing Dia. Inner hole No. pcs 100 16 56 100 16 66 100 16 72 100 16 80 115 22 56 115 22 66 115 22 72 115 22 80 125 22 56 125 22 66 125 22 72 125 22 80 125 22 90 150 22 90 150 22 100 150 22 110 180 22 110 180 22 120 180 22 130 180 22 140
REFERENCE 0307-61
Aluminium oxide sanding mop flap for steel
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
19 listed configurations · view dimensions
Dia. | Inner hole | No. pcs — verify units and ordered drawing Dia. Inner hole No. pcs 100 16 56 100 16 66 100 16 72 100 16 80 115 22 56 115 22 66 115 22 72 115 22 80 125 22 56 125 22 66 125 22 72 125 22 80 125 22 90 150 22 90 150 22 100 150 22 110 180 22 110 180 22 120 180 22 130
REFERENCE 0307-62
Fused alumina zirconia sanding mop flap for stainless
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
20 listed configurations · view dimensions
Dia. | Inner hole | No.pcs — verify units and ordered drawing Dia. Inner hole No.pcs 100 16 56 100 16 66 100 16 72 100 16 80 115 22 56 115 22 66 115 22 72 115 22 80 125 22 56 125 22 66 125 22 72 125 22 80 125 22 90 150 22 90 150 22 100 150 22 110 180 22 110 180 22 120 180 22 130 180 22 140 - Dimensions and configurations
15 listed configurations · view dimensions
Dia. | Grit — verify units and ordered drawing Dia. Grit 115 40 115 60 115 80 115 100 115 120 125 40 125 60 125 80 125 100 125 120 180 40 180 60 180 80 180 100 180 120
REFERENCE 0307-63
Fibre glass backed tunk disc
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dia. — verify units and ordered drawing
- 100; 115; 125; 178
REFERENCE 0307-64
Fibre paper backed disc
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dia. — verify units and ordered drawing
- 100; 115; 125; 178
REFERENCE 0307-65
Threaded stripping discs
A nylon backing and either nylon or metal thread construction are described.
- Diameter options
- 100, 115, 125, 180 mm
- Thread
- M14
REFERENCE 0307-66
Left/right PCD composite blades, narrow bore
Handed PCD cutting directions support composite-panel machining.
- Diameter × bore × teeth reference
- 300 × 30 × 46T; confirm dimension units
REFERENCE 0307-67
Left/right PCD composite blades, wide bore
A separate paired left/right PCD composite-saw direction.
- Diameter × bore × teeth reference
- 300 × 80 × 64T; confirm dimension units
REFERENCE 0307-68
Impact-driver step drills
M2 HSS, a split point, hex shank, two spiral flutes and laser size marking distinguish this direction.
- Point angle
- 135°
- Range / step count
- 4–12 mm / 5 or 9 steps; 4–20 mm / 9 steps; 4–30 mm / 12 steps
REFERENCE 0307-69
Curved bi-metal reciprocating blades
A curved tooth line and bi-metal construction are described for iron pipe and angle sections.
- Length / TPI
- 200 or 250 mm / 10–14 TPI
REFERENCE 0307-70
Single-flute solid-carbide upcut mills
A single upcut flute and polished cutting direction serve aluminium and plastic routing.
- Cut diameter range
- 3.175–10 mm
- Shank diameter range
- 3.175–12 mm
REFERENCE 0307-71
Coated HSS single-flute end mills
A coated single-upcut-flute direction for carving, slotting and milling aluminium profiles.
- Cut diameter range
- 4–10 mm
- Shank diameter
- 10 mm
REFERENCE 0307-72
Aluminium-profile carbide saw blades
A separate saw direction is intended for aluminium door/window and cold-drawn profiles.
- Diameter / bore / teeth
- 254 mm / 15.88 mm / 100T
REFERENCE 0307-73
Oscillating blades with different cutting materials
Separate HSS, carbide and M42 bi-metal structures are described for soft-metal oscillating cutting. Confirm the exact fitting and drawing dimension order.
- HSS construction
- D6A + M2: Ø87 × 1.37 mm × 0.65/0.8 reference
- Carbide construction
- D6A + carbide: 34 × 40 × 0.94/1.2 reference
- Bi-metal constructions
- M42 + D6A: 34 × 40 × 1.4 × 0.8; 44 × 50 × 1.4 × 0.8; 44 × 40 × 1.3 × 0.8. M42: 69 × 41 × 1.4 × 0.8. Confirm units for each drawing dimension.
REFERENCE 0307-74
M35 cobalt spiral step drills
M35 HSS with 5% cobalt, two spiral flutes and a three-flat shank form this metal-drilling direction. Confirm the workpiece and actual cutting conditions.
- Material hardness reference
- 66–69 HRC
- Range / steps
- 3/16–1-1/4 inch / 18 steps
REFERENCE 0307-75
Large spiral-flute HSS step drills
A large-hole step direction for sheet aluminium, wood and plastics. Confirm coating; the coating descriptions do not agree.
- Range / step count
- 1/4–2 inch / 10 sizes
- Sheet-thickness application reference
- Up to 0.2 inch, subject to material/trial review
REFERENCE 0307-76
Spiral-flute tube and sheet drills
TiN HSS with a curved groove is described for sheet metal, thermoplastics and thermosets.
- Size references
- 3–14; 5–20; 5–22.5 × 72; 5–31 × 103; 10–30 × 76; 16–30.5 × 76; 24–40 × 89; 36–50 × 97; 40–61 mm
- Sheet thickness reference
- Up to 3.0 mm, subject to work-material review
REFERENCE 0307-77
Spiral-groove TiN countersinks
A curved chip groove and spiral flutes are described for metal deburring and countersinking at low cutting speeds.
- Angle
- 90°
- Diameter options
- 6.3, 8.3, 10.4, 12.4, 16.5, 23, 25, 28, 30, 31, 40 mm
REFERENCE 0307-78
Two-tool Ti-coated HSS step-drill set
An X-form split point and titanium treatment are described; match the workpiece rather than assuming all-steel capability.
- Point angle
- 118°
- Ranges
- 1/4–1-3/8 inch; 3/16–7/8 inch
REFERENCE 0307-79
Rotary burrs type J - 60° Conical
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing Dia. blade Length blade Oal. Dia. Shank 6 8 55 6 8 7 57 6 10 12 58 6 12 15 60 6 16 14 62 6
REFERENCE 0307-80
ANSI B94.11 M HSS jobber drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- roll ground; confirm availability for each size
- Dimensions and configurations
32 listed configurations · view dimensions
Dia. | L1 Oal | L2 Flute — verify units and ordered drawing Dia. L1 Oal L2 Flute 1/64 3/4 3/16 1/32 1-3/8 1/2 3/64 1-3/4 3/4 1/16 1-7/8 7/8 5/64 2 1 3/32 2-1/4 1-1/4 7/64 2-5/8 1-1/2 1/8 2-3/4 1-5/8 9/64 2-7/8 1-3/4 5/32 3-1/8 2 11/64 3-1/4 2-1/8 3/16 3-1/2 2-5/6 13/64 3-5/8 2-7/16 7/32 3-3/4 2-1/2 15/64 3-7/8 2-5/8 1/4 4 2-3/4 17/64 4-1/8 2-7/8 9/32 4-1/4 2-15/16 19/64 4-3/8 3-1/16 5/16 4-1/2 3-3/16 21/64 4-5/8 3-5/16 11/32 4-3/4 3-7/16 23/64 4-7/8 3-1/2 3/8 5 3-5/8 25/64 5-1/8 3-3/4 13/32 5-1/4 3-7/8 27/64 5-3/8 3-15/16 7/16 5-1/2 4-1/16 29/64 5-5/8 4-3/16 15/32 5-3/4 4-5/16 31/64 5-7/8 4-3/8 1/2 6 4-1/2
REFERENCE 0307-81
ANSI B94.11 M screw machine length fully ground stub drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- fully ground; confirm availability for each size
- Dimensions and configurations
30 listed configurations · view dimensions
Dia. | L1 Oal | L2 Flute — verify units and ordered drawing Dia. L1 Oal L2 Flute 3/64 1-3/8 1/2 1/16 1-5/8 5/8 5/64 1-11/16 11/16 3/32 1-3/4 3/4 7/64 1-13/16 13/16 1/8 1-7/8 7/8 9/64 1-15/16 15/16 5/32 2-1/16 1 11/64 2-1/8 1-1/16 3/16 2-3/16 1-1/8 13/64 2-1/4 1-3/16 7/32 2-3/8 1-1/4 15/64 2-7/16 1-5/16 1/4 2-1/2 1-3/8 17/64 2-5/8 1-7/16 9/32 2-11/16 1-1/2 19/64 2-3/4 1-9/16 5/16 2-13/16 1-5/8 21/64 2-15/16 1-11/16 11/32 3 1-11/16 23/64 3-1/16 1-3/4 3/8 3-1/8 1-13/16 25/64 3-1/4 1-7/8 13/32 3-5/16 1-15/16 27/64 3-3/8 2 7/16 3-7/16 2-1/16 29/64 3-9/16 2-1/8 15/32 3-5/8 2-1/8 31/64 3-11/16 2-3/16 1/2 3-3/4 2-1/4
REFERENCE 0307-82
ANSI B94.11 M HSS number drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- roll forged; fully ground; TiN coated; ZrN coated; Co.M35; Co.M42; confirm availability for each size
- Dimensions and configurations
30 listed configurations · view dimensions
number | L1 Oal | L2 Flute — verify units and ordered drawing number L1 Oal L2 Flute 1 3-7/8 2-5/8 2 3-7/8 2-5/8 3 3-3/4 2-1/2 4 3-3/4 2-1/2 5 3-3/4 2-1/2 6 3-3/4 2-1/2 7 3-5/8 2-7/16 8 3-5/8 2-7/16 9 3-5/8 2-7/16 10 3-5/8 2-7/16 11 3-1/2 2-5/16 12 3-1/2 2-5/16 13 3-1/2 2-5/16 14 3-3/8 2-3/16 15 3-3/8 2-3/16 16 3-3/8 2-3/16 17 3-3/8 2-3/16 18 3-1/4 2-1/8 19 3-1/4 2-1/8 20 3-1/4 2-1/8 21 3-1/4 2-1/8 22 3-1/8 2 23 3-1/8 2 24 3-1/8 2 25 3 1-7/8 26 3 1-7/8 27 3 1-7/8 28 2-7/8 1-3/4 29 2-7/8 1-3/4 30 2-3/4 1-5/8
REFERENCE 0307-83
ANSI B94.11 M HSS fully ground number stub drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- fully ground; confirm availability for each size
- Dimensions and configurations
30 listed configurations · view dimensions
number | L1 Oal | L2 Flute — verify units and ordered drawing number L1 Oal L2 Flute 1 2-7/16 1-5/16 2 2-7/16 1-5/16 3 2-3/8 1-1/4 4 2-3/8 1-1/4 5 2-3/8 1-1/4 6 2-3/8 1-1/4 7 2-1/4 1-3/16 8 2-1/4 1-3/16 9 2-1/4 1-3/16 10 2-1/4 1-3/16 11 2-1/4 1-3/16 12 2-1/4 1-3/16 13 2-3/16 1-1/8 14 2-3/16 1-1/8 15 2-3/16 1-1/8 16 2-3/16 1-1/8 17 2-3/16 1-1/8 18 2-1/8 1-1/16 19 2-1/8 1-1/16 20 2-1/8 1-1/16 21 2-1/8 1-1/16 22 2-1/8 2 23 2-1/16 1 24 2-1/16 1 25 2-1/16 1 26 2-1/16 1 27 2-1/16 1 28 1-15/16 15/16 29 1-15/16 15/16 30 1-15/16 15/16
REFERENCE 0307-84
Hex shank HSS fully ground TiN coated jobber drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
13 listed configurations · view dimensions
Dia. | L1 Oal | L2 Flute — verify units and ordered drawing Dia. L1 Oal L2 Flute 1/16 1-7/8 7/8 5/64 2 1 3/32 2-1/4 1-1/4 7/64 2-5/8 1-1/2 1/8 2-3/4 1-5/8 9/64 2-7/8 1-3/4 5/32 3-1/8 2 11/64 3-1/4 2-1/8 3/16 3-1/2 2-5/6 13/64 3-5/8 2-7/16 7/32 3-3/4 2-1/2 15/64 3-7/8 2-5/8 1/4 4 2-3/4
REFERENCE 0307-85
ANSI B94.11 M aircraft extension 12” ground number drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- fully ground; confirm availability for each size
- Dimensions and configurations
40 listed configurations · view dimensions
Number | Dia. | L2 Flute — verify units and ordered drawing Number Dia. L2 Flute 1 0.2280 2-5/8 2 0.2210 2-5/8 3 0.2130 2-1/2 4 0.2090 2-1/2 5 0.2055 2-1/2 6 0.2040 2-1/2 7 0.2010 2-7/16 8 0.1990 2-7/16 9 0.1960 2-7/16 10 0.1935 2-7/16 11 0.1910 2-5/16 12 0.1890 2-5/16 13 0.1850 2-5/16 14 0.1820 2-3/16 15 0.1800 2-3/16 16 0.1770 2-3/16 17 0.1730 2-3/16 18 0.1695 2-1/8 19 0.1660 2-1/8 20 0.1610 2-1/8 21 0.1590 2-1/8 22 0.1570 2 23 0.1540 2 24 0.1520 2 25 0.1495 1-7/8 26 0.1470 1-7/8 27 0.1440 1-7/8 28 0.1405 1-3/4 29 0.1360 1-3/4 30 0.1285 1-5/8 31 0.1200 1-5/8 32 0.1160 1-5/8 33 0.1130 1-1/2 34 0.1110 1-1/2 35 0.1100 1-1/2 36 0.1065 1-7/16 37 0.1040 1-7/16 38 0.1015 1-7/16 39 0.0995 1-7/16 40 0.0980 1-7/16
REFERENCE 0307-86
ANSI B94.11 M HSS letter drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- roll forged; confirm availability for each size
- Dimensions and configurations
26 listed configurations · view dimensions
Dia. | L1 Oal | L2 Flute — verify units and ordered drawing Dia. L1 Oal L2 Flute A 3-7/8 2-5/8 B 4 2-3/4 C 4 2-3/4 D 4 2-3/4 E 4 2-3/4 F 4-1/8 2-7/8 G 4-1/8 2-7/8 H 4-1/8 2-7/8 I 4-1/8 2-7/8 J 4-1/8 2-7/8 K 4-1/4 2-15/16 L 4-1/4 2-15/16 M 4-3/8 3-1/16 N 4-3/8 3-1/16 O 4-1/2 3-3/16 P 4-5/8 3-5/16 Q 4-3/4 3-7/16 R 4-3/4 3-7/16 S 4-7/8 3-1/2 T 4-7/8 3-1/2 U 5 3-5/8 V 5 3-5/8 W 5-1/8 3-3/4 X 5-1/8 3-3/4 Y 5-1/4 3-7/8 Z 5-1/4 3-7/8
REFERENCE 0307-87
Taper and deburring countersinkers DIN334 type D 60° HSS
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
8 listed configurations · view dimensions
Countersinker | Countersinker | Total | Shank — verify units and ordered drawing Countersinker Countersinker Total Shank 16.0 4.0 90.0 MT1 20.0 5.0 106.0 MT2 25.0 6.3 112.0 MT2 31.5 10.0 118.0 MT2 40.0 12.5 150.0 MT3 50.0 16.0 160.0 MT3 63.0 20.0 190.0 MT4 80.0 25.0 200.0 MT4
REFERENCE 0307-88
Taper and deburring countersinkers Bits “Long” 90° HSS
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
6 listed configurations · view dimensions
Countersinker | Countersinker | Total | Shank — verify units and ordered drawing Countersinker Countersinker Total Shank 6.3 1.5 38.0 1/4” 8.3 2.0 38.0 1/4” 10.4 2.5 41.0 1/4” 12.4 2.8 42.0 1/4” 16.5 3.2 47.0 1/4” 20.5 3.5 48.0 1/4”
REFERENCE 0307-89
Flat countersinkers DIN373 HSS with fixed guide
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
7 listed configurations · view dimensions
Fine-clearance through hole — thread | countersink d2 mm | pilot d1 mm | shank d3 mm | overall L mm Fine-clearance through hole — thread countersink d2 mm pilot d1 mm shank d3 mm overall L mm M3 6 3.2 5.0 71 M4 8 4.3 5.0 71 M5 10 5.3 8.0 80 M6 11 6.4 8.0 80 M8 15 8.4 12.5 100 M10 18 10.5 12.5 100 M12 20 13.0 12.5 100 - Dimensions and configurations
7 listed configurations · view dimensions
Medium-clearance through hole — thread | countersink d2 mm | pilot d1 mm | shank d3 mm | overall L mm Medium-clearance through hole — thread countersink d2 mm pilot d1 mm shank d3 mm overall L mm M3 6 3.4 5.0 71 M4 8 4.5 5.0 71 M5 10 5.5 8.0 80 M6 11 6.6 8.0 80 M8 15 9.0 12.5 100 M10 18 11.0 12.5 100 M12 20 13.5 12.5 100 - Dimensions and configurations
7 listed configurations · view dimensions
Thread core-hole direction — thread | countersink d2 mm | pilot d1 mm | shank d3 mm | overall L mm Thread core-hole direction — thread countersink d2 mm pilot d1 mm shank d3 mm overall L mm M3 6 2.5 5.0 71 M4 8 3.3 5.0 71 M5 10 4.2 8.0 80 M6 11 5.0 8.0 80 M8 15 6.8 12.5 100 M10 18 8.5 12.5 100 M12 20 10.2 12.5 100
REFERENCE 0307-90
Slotted taper and deburring countersinkers 90° HSS
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
10 listed configurations · view dimensions
Countersinker nominal ? mm | Countersinker range mm | Head ? d1 mm | Shank ? d2 mm | Total length L mm — verify units and ordered drawing Countersinker nominal ? mm Countersinker range mm Head ? d1 mm Shank ? d2 mm Total length L mm 1/4 1.0-4.0 6.35 6.35 45.0 2/5 2.0-5.0 10.0 6.0 45.0 510 5.0-10.0 14.0 8.0 48.0 10/15 10.0-15.0 21.0 10.0 65.0 15/20 15.0-20.0 28.0 12.0 85.0 20/25 20.0-25.0 35.0 12.0 102.0 25/30 25.0-30.0 44.0 15.0 115.0 30/35 30.0-35.0 48.0 15.0 127.0 35/40 35.0-40.0 53.0 15.0 136.0 40/50 40.0-50.0 64.0 18.0 166.0
REFERENCE 0307-91
Slotted taper and deburring countersinkers 5 flutes
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
13 listed configurations · view dimensions
Shank Dia. | size — verify units and ordered drawing Shank Dia. size 3/16” 3/16” 1/4 1/4 5/16 1/4 3/8 1/4 1/2 1/4 5/8 1/2 3/4 1/2 7/8 1/2 1 1/2 1-1/4 3/4 1-1/2 3/4 1-3/4 1 2 1
REFERENCE 0307-92
Hand deburrer DIN335 type C 90° HSS,CBN ground
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
5 listed configurations · view dimensions
size | Unlabelled dimension — verify units and ordered drawing size Unlabelled dimension 12.4mm 31/64” 15.0mm 19/32 16.5mm 21/32 20.5mm 13/16 25.0mm 63/64
REFERENCE 0307-93
Taper and deburring countersinkers DIN335 type C 90°
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
29 listed configurations · view dimensions
Max Dia. | Min Dia. | Oal. | Shk Dia. — verify units and ordered drawing Max Dia. Min Dia. Oal. Shk Dia. 4.3 1.3 40 4 4.8 1.5 40 4 5 1.5 40 4 5.3 1.5 40 4 5.8 1.5 45 5 6 1.5 45 5 6.3 1.5 45 5 7 1.8 50 6 7.3 1.8 50 6 8 2 50 6 8.3 2 50 6 9.4 2.2 50 6 10 2.5 50 6 10.4 2.5 50 6 11.5 2.8 56 8 12.4 2.8 56 8 13.4 2.9 56 8 15 3.2 60 10 16.5 3.2 60 8 19 3.5 63 10 20.5 3.5 63 10 23 3.8 67 10 25 3.8 67 10 26 3.9 71 12 28 4 71 12 30 4.1 71 12 31 4.2 71 12 37 4.8 90 12 40 10 80 15
REFERENCE 0307-94
Taper and deburring countersinkers DIN334 type C 60° HSS
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
7 listed configurations · view dimensions
Max Dia. | Min Dia. | Oal. | Shk Dia. — verify units and ordered drawing Max Dia. Min Dia. Oal. Shk Dia. 6.3 1.6 45 5 8.0 2.0 50 6 10.0 2.5 50 6 12.5 3.2 56 8 16.0 4.0 63 10 20.0 5.0 67 10 25.0 6.3 71 10
REFERENCE 0307-95
DIN352 hand tap
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Construction / finish choices
- Alloy steel; HSS; confirm availability for each size
- Dimensions and configurations
43 listed configurations · view dimensions
Code | P | d1 | d2 | d3(h13) | l1 | l2 | a(h12) | l — verify units and ordered drawing Code P d1 d2 d3(h13) l1 l2 a(h12) l M1 0.25 1.0 2.5 d1-0.3 32.0 5.5 2.1 5.0 M1.1 0.25 1.1 2.5 d1-0.3 32.0 5.5 2.1 5.0 M1.2 0.25 1.2 2.5 d1-0.3 32.0 5.5 2.1 5.0 M1.4 0.3 1.4 2.5 d1-0.4 32.0 7.0 2.1 5.0 M1.6 0.35 1.6 2.5 d1-0.4 32.0 8.0 2.1 5.0 M1.7 0.35 1.7 2.5 d1-0.4 32.0 8.0 2.1 5.0 M1.8 0.35 1.8 2.5 d1-0.4 32.0 8.0 2.1 5.0 M2 0.4 2.0 2.8 d1-0.5 36.0 8.0 2.1 5.0 M2.2 0.45 2.2 2.8 d1-0.6 36.0 9.0 2.1 5.0 M2.3 0.4 2.3 2.8 d1-0.5 36.0 9.0 2.1 5.0 M2.5 0.45 2.5 2.8 d1-0.6 40.0 9.0 2.1 5.0 M2.6 0.45 2.6 2.8 d1-0.6 40.0 9.0 2.1 5.0 M3.0 0.5 3.0 3.5 d1-0.6 40.0 11.0 2.7 6.0 M3.5 0.6 3.5 4.0 d1-0.7 45.0 13.0 3.0 6.0 M4 0.7 4.0 4.5 d1-0.8 45.0 13.0 3.4 6.0 M4.5 0.75 4.5 6.0 d1-0.9 50.0 16.0 4.9 8.0 M5 0.8 5.0 6.0 d1-1.0 50.0 16.0 4.9 8.0 M6 1.0 6.0 6.0 d1-1.2 50.0 19.0 4.9 8.0 M7 1.0 7.0 6.0 d1-1.2 50.0 19.0 4.9 8.0 M8 1.25 8.0 6.0 d1-1.5 56.0 22.0 4.9 8.0 M9 1.25 9.0 7.0 d1-1.5 56.0 22.0 5.5 8.0 M10 1.5 10.0 7.0 d1-1.8 70.0 24.0 5.5 8.0 M11 1.5 11.0 8.0 d1-1.8 70.0 24.0 6.2 9.0 M12 1.75 12.0 9.0 d1-2.1 75.0 29.0 7.0 10.0 M14 2.0 14.0 11.0 d1-2.4 80.0 30.0 9.0 12.0 M16 2.0 16.0 12.0 d1-2.4 80.0 32.0 9.0 12.0 M18 2.5 18.0 14.0 d1-3.0 95.0 40.0 11.0 14.0 M20 2.5 20.0 16.0 d1-3.0 95.0 40.0 12.0 15.0 M22 2.5 22.0 18.0 d1-3.0 100.0 40.0 14.5 17.0 M24 3.0 24.0 18.0 d1-3.6 110.0 50.0 14.5 17.0 M27 3.0 27.0 20.0 d1-3.6 110.0 50.0 16.0 19.0 M30 3.5 30.0 22.0 d1-4.2 125.0 56.0 18.0 21.0 M33 3.5 33.0 25.0 d1-4.2 125.0 56.0 20.0 23.0 M36 4.0 36.0 28.0 d1-4.8 150.0 63.0 22.0 25.0 M39 4.0 39.0 32.0 d1-4.8 150.0 63.0 24.0 27.0 M42 4.5 42.0 32.0 d1-5.4 150.0 63.0 24.0 27.0 M45 4.5 45.0 36.0 d1-5.4 160.0 70.0 29.0 32.0 M48 5.0 48.0 36.0 d1-6.0 180.0 75.0 29.0 32.0 M52 5.0 52.0 40.0 d1-6.0 180.0 75.0 32.0 35.0 M56 5.5 56.0 45.0 d1-6.6 200.0 85.0 35.0 38.0 M60 5.5 60.0 45.0 d1-6.6 200.0 85.0 35.0 38.0 M64 6.0 64.0 50.0 d1-7.2 220.0 90.0 39.0 38.0 M68 6.0 68.0 50.0 d1-7.2 220.0 90.0 39.0 38.0
REFERENCE 0307-96
Hand tap alloy imperial size standard
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Tap size — verify units and ordered drawing
- 1/8; 5/32; 5/16; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 7/8; 1
REFERENCE 0307-97
Hand tap HSS imperial size standard
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Tap size — verify units and ordered drawing
- 1/8; 5/32; 5/16; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 7/8; 1
REFERENCE 0307-98
DIN371 HSS machine tap
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
8 listed configurations · view dimensions
thread size | pitch mm | thread core hole mm | total length mm | thread length mm | ? shank mm — verify units and ordered drawing thread size pitch mm thread core hole mm total length mm thread length mm ? shank mm M2 0.4 1.6 45 8 2.8 M2.5 0.45 2.05 50 9 2.8 M3 0.5 2.5 56 10 3.5 M4 0.7 3.3 63 12 4.5 M5 0.8 4.2 70 13 6.0 M6 1.0 5 80 13 6.0 M8 1.25 6.8 90 18 8.0 M10 1.5 8.5 100 20 10.0
REFERENCE 0307-99
DIN376 HSS machine tap
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Construction / finish choices
- straight flute; spiral flute; confirm availability for each size
- Dimensions and configurations
15 listed configurations · view dimensions
thread size | pitch mm | thread core hole mm | total length mm | thread length mm | shank mm — verify units and ordered drawing thread size pitch mm thread core hole mm total length mm thread length mm shank mm M3 0.5 2.5 56 10 2.2 M4 0.7 3.3 63 12 2.8 M5 0.8 4.2 70 13 3.5 M6 1.0 5.0 80 13 4.5 M8 1.25 6.8 90 18 6.0 M10 1.5 8.5 100 20 7.0 M12 1.75 10.2 110 22 9.0 M14 2.0 12 110 25 11.0 M16 2.0 14 110 28 12.0 M18 2.5 15.5 125 30 14.0 M20 2.5 17.5 140 30 16.0 M22 2.5 19.5 140 30 18.0 M24 3.0 21 160 32 18.0 M27 3.0 24 160 38 20.0 M30 3.5 26.5 180 45 22.0
REFERENCE 0307-100
Machine tap HSS imperial size ground pitch
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Tap size — verify units and ordered drawing
- 1/8; 5/32; 5/16; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 7/8; 1
REFERENCE 0307-101
Screw extractor
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
10 listed configurations · view dimensions
No. size | For screw | For screw — verify units and ordered drawing No. size For screw For screw 1 M3-M6 1/8 - 15/64” 2 M6-M8 15/64 - 5/16” 3 M8-M10 5/16 - 3/8” 4 M11-M14 7/16 - 9/16” 5 M14-M16 9/16 - 5/8” 6 M16-M18 5/8 - 23/32” 7 M24-M34 15/16 - 1-11/32” 8 M34-M44 1-11/32 - 1-23/32” 9 M44-M53 1-23/32 - 2-3/32” 10 M53-M63 2-3/32 - 2-15/32”
REFERENCE 0307-102
Combination drill&taps
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
15 listed configurations · view dimensions
Size | Pitch | Oal. | thread L | Drill Length | Drill Dia. — verify units and ordered drawing Size Pitch Oal. thread L Drill Length Drill Dia. M3 0.5 51 7.0 5.0 2.5 M4 0.7 54 8.5 6.0 3.3 M5 0.8 57 10.0 7.0 4.2 M6 1.0 60 12.0 8.0 5.0 M8 1.25 68 15.0 11.0 6.8 M10 1.50 75 17.0 15.0 8.5 1/4 20 2-1/2 15/16 17/32 0.2010 1/4 28 2-1/2 15/16 17/32 0.2175 5/16 18 3 1-1/8 11/16 0.2570 5/16 24 3 1-1/8 11/16 0.2720 3/8 16 3-1/2 1-1/4 13/16 0.3125 7/16 14 3-7/8 1-7/16 1 0.3680 7/16 20 3-7/8 1-7/16 1 0.3890 1/2 13 4-1/4 1-21/32 1-1/8 0.4250 1/2 20 4-1/4 1-21/32 1-1/8 0.4510
REFERENCE 0307-103
Metric thread-repair cutting tools
Select the metric thread, pitch and repair assembly from an approved drawing. Pilot-hole selection requires the actual tool and insert-system specification.
- Dimensions and configurations
5 listed configurations · view dimensions
Size | Pitch | Core hole — verify units and ordered drawing Size Pitch Core hole M3 0.5 2.50 M4 0.7 3.30 M5 0.8 4.20 M6 1.0 5.0 M8 1.25 6.8
REFERENCE 0307-104
HSS-G fully ground threading-bits
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
5 listed configurations · view dimensions
Size | Pitch | Core hole — verify units and ordered drawing Size Pitch Core hole M3 0.5 2.50 M4 0.7 3.30 M5 0.8 4.20 M6 1.0 5.0 M8 1.25 6.8
REFERENCE 0307-105
T - type-tap wrench with ratchet
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
4 listed configurations · view dimensions
Size | Length | For hand M | Tape size Ww | G — verify units and ordered drawing Size Length For hand M Tape size Ww G 1# 85.0 M3-M10 1/8 - 3/8 — 2# 100.0 M5-M12 7/32 - 1/2 6-1/8 10# 250.0 M3-M10 1/8 - 3/8 — 20# 300.0 M5-M12 7/32 - 1/2 6-1/8
REFERENCE 0307-106
DIN1814 adjustable tap wrench
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
9 listed configurations · view dimensions
size | For tap size Metric | UNC/UNF | Pipe | Length — verify units and ordered drawing size For tap size Metric UNC/UNF Pipe Length 0 M1-M8 1/16 - 5/16 — 125 1 M3-M10 1/8 - 3/8 — 180 1-1/2 M3-M12 1/8 - 1/2 G1/8 200 2 M4-M12 3/16 - 5/8 G1/8-G3/8 280 3 M5-M20 1/4 - 3/4 G1/8-G1/2 375 4 M10-M27 3/8 - 1 G1/8-G3/4 500 5 M14-M33 5/8 - 1-1/4 G1/4-G1 750 6 M18-M42 3/4 - 1-1/2 G1/4-G1-1/4 1000 7 M25-M52 7/8 - 2 G5/8-G2-1/4 1250
REFERENCE 0307-107
Screw-hole / Sheet metal punch
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
46 listed configurations · view dimensions
Dia. | Draw-in bolt metric fine thread — verify units and ordered drawing Dia. Draw-in bolt metric fine thread 12.7 MF8 15.2 MF10 16 MF10 16.5 MF10 18.6 MF10 19 MF10 20 MF10 20.4 MF10 21 MF10 22 MF10 22.5 MF10 23 MF10 24 MF10 25 MF10 25.4 MF10 26 MF10 27 MF10 28.3 MF12 29 MF12 30 MF12 30.5 MF12 31 MF12 31.7 MF12 32 MF12 32.5 MF12 33 MF12 34 MF12 35 MF12 36 MF12 37 MF12 38 MF12 40 MF12 40.5 MF16 42 MF16 43 MF16 45 MF16 47 MF16 50 MF16 50.5 MF16 51 MF16 53 MF16 54 MF16 55 MF16 60 MF16 61.5 MF16 63.5 MF16
REFERENCE 0307-108
Bi-metal hole saw Metric / Inch
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Metric hole-saw diameters (mm)
- 14, 16, 17, 19, 20, 21, 22, 24, 25, 27, 28, 29, 30, 32, 33, 35, 37, 38, 40, 41, 43, 44, 46, 48, 51, 52, 54, 57, 59, 60, 64, 65, 67, 68, 70, 73, 76, 79, 83, 86, 89, 92, 95, 98, 102, 105, 108, 111, 114, 121, 127, 133, 140, 146, 152, 160, 168, 178, 200, 210
- Imperial hole-saw diameters (inch)
- 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-9/16, 1-5/8, 1-11/16, 1-3/4, 1-13/16, 1-7/8, 2, 2-1/16, 2-1/8, 2-1/4, 2-5/16, 2-3/8, 2-1/2, 2-9/16, 2-5/8, 2-11/16, 2-3/4, 2-7/8, 3, 3-1/8, 3-1/4, 3-3/8, 3-1/2, 3-5/8, 3-3/4, 3-7/8, 4, 4-1/8, 4-1/4, 4-3/8, 4-1/2, 4-3/4, 5, 5-1/4, 5-1/2, 5-3/4, 6, 6-19/64, 6-1/2, 6-39/64, 7, 7-7/8, 8, 8-3/8
- Material choices
- M3 or M42 cutting-material directions; confirm exact size and construction
REFERENCE 0307-109
Arbors for Bi-metal hole saw
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
9 listed configurations · view dimensions
Shank size | Thread size | Chunk size | Fits size — verify units and ordered drawing Shank size Thread size Chunk size Fits size 1/4 Round 1/2--20 UNF 1/4 9/16--1-3/16 3/8 Hex 1/2--20 UNF 3/8 9/16--1-3/16 7/16 Hex 1/2--20 UNF 1/2 9/16--1-3/16 7/16 Hex 5/8--18 UNF 1/2 1-1/4--8-17/64 3/8 Hex 5/8--18 UNF 3/8 1-1/4--8-17/64 5/8 Hex 5/8--18 UNF 3/4 1-1/4--8-17/64 SDS Plus shank 1/2--20 UNF SDS 9/16--1-3/16 SDS Plus shank 5/8--18 UNF SDS 1-1/4--8-17/64 SDS Plus shank 5/8--18 UNF SDS 1-1/4--7-7/8 - Accessories
- Thread adapter: 1/2-20 arbor to 5/8-18 hole-saw connection; nominal extension lengths 5-1/2, 10, 12 or 18 inch for 7/16- or 3/8-inch arbors; ejector spring and hex key. Confirm exact extension drawing and spring/pilot fit.
- Additional arbor directions
- 7/16-inch hex with 1/2-20 UNF or 5/8-18 UNF connection; confirm chuck and hole-saw range separately.
REFERENCE 0307-110
Bi-metal hole saw with hexagon built in shank
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
8 listed configurations · view dimensions
size | Cutting depth — verify units and ordered drawing size Cutting depth 20 40 22 40 25 40 29 40 32 40 35 40 40 40 45 40
REFERENCE 0307-111
Bi-metal sheet metal impact hole saw
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
11 listed configurations · view dimensions
size | size — verify units and ordered drawing size size 16 5/8” 19 3/4” 20 25/32” 22 7/8” 25 1” 27 1-1/16” 29 1-1/8” 30 1-3/16” 32 1-1/4” 35 1-3/8” 38 1-1/2”
REFERENCE 0307-112
TCT hole saw
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dia.mm — verify units and ordered drawing
- 12; 13; 14; 15; 16; 17; 19; 20; 21; 22; 24; 25; 28; 30; 32; 35; 38; 40; 42; 45; 48; 50; 52; 55; 58; 60; 65; 70; 75; 80; 85; 90; 95; 100
REFERENCE 0307-113
HSS hole saw
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dia.mm — verify units and ordered drawing
- 12; 13; 14; 15; 16; 18; 19; 20; 21; 22; 23; 24; 25; 26; 27; 28; 29; 30; 31; 32; 33; 34; 35; 37; 38; 39; 40; 41; 42; 45; 50; 55; 60; 65; 70; 75; 80; 85; 90; 95; 100
REFERENCE 0307-114
Tungsten carbide tipped hole saw
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dia. metric — verify units and ordered drawing
- 14; 16; 17; 19; 20; 21; 22; 24; 25; 27; 28; 29; 30; 32; 33; 35; 37; 38; 40; 41; 43; 44; 46; 48; 51; 52; 54; 57; 59; 60; 64; 65; 67; 68; 70; 73; 76; 79; 83; 86; 89; 92; 95; 98; 102; 105; 108; 111; 114; 121; 127; 133; 140; 146; 152; 160; 168; 178; 200
REFERENCE 0307-115
Bi-metal hole saw Metric / Inch
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Construction / finish choices
- M42; confirm availability for each size
- Dia. mm — verify units and ordered drawing
- 14; 16; 17; 19; 20; 21; 22; 24; 25; 27; 28; 29; 30; 32; 33; 35; 37; 38; 40; 41; 43; 44; 46; 48; 51; 52; 54; 57; 59; 60; 64; 65; 67; 68; 70; 73; 76; 79; 83; 86; 89; 92; 95; 98; 102; 105; 108; 111; 114; 121; 127; 133; 140; 146; 152; 160; 168; 178; 200; 210
REFERENCE 0307-116
TCT multi cutting saw blade spaced teeth
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- size — verify units and ordered drawing
- 185; 210; 255; 355
REFERENCE 0307-117
TCT multi cutting saw blade
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
13 listed configurations · view dimensions
Dia. outer | Core thick | Teeth no. — verify units and ordered drawing Dia. outer Core thick Teeth no. 160 1.8 40 185 1.8 60 190 1.8 60 210 1.8 60 250 2.0 60 300 2.2 60 315 2.2 60 350 2.2 60 400 2.5 80 450 2.5 80 500 2.5 80 600 3.0 80 700 3.0 80
REFERENCE 0307-118
Circular saw blade for Aluminum working
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
15 listed configurations · view dimensions
Outer Dia. | Outer Dia. | Kerf | Core thick | Hole Dia. | Teeth No. — verify units and ordered drawing Outer Dia. Outer Dia. Kerf Core thick Hole Dia. Teeth No. 230 9” 2.6 1.6 20/25.4 80 230 9 2.6 1.6 20/25.4 100 250 10 2.8 1.6/1.8 25.4/30 80 250 10 2.8 1.6/1.8 25.4/30 100 250 10 2.8 1.6/1.8 25.4/30 120 300 12 3.1 1.8/2.0 25.4/30 100 300 12 3.1 1.8/2.0 25.4/30 120 350 14 3.1 1.8/2.0 25.4/30 100 350 14 3.1 1.8/2.0 25.4/30 120 400 16 3.1 1.8/2.0 25.4/30 100 400 16 3.1 1.8/2.0 25.4/30 120 400 16 3.1 1.8/2.0 25.4/30 140 450 18 3.1 1.8/2.0 25.4/30 100 450 18 3.1 1.8/2.0 25.4/30 120 450 18 3.1 1.8/2.0 25.4/30 140
REFERENCE 0307-119
HSS circular saw blade
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
19 listed configurations · view dimensions
Blade geometry — diameter | plate thickness | bore | teeth; units to ordered drawing Blade geometry — diameter plate thickness bore teeth 225 2.0 40 120 225 2.0 32 180 250 2.0 32 128 250 2.0 32 160 250 2.0 32 180 250 2.0 32 200 250 2.5 32 160 250 2.5 32 200 275 2.5 32 140 275 2.5 32 180 275 2.5 32 220 275 2.5 40 220 300 2.5 32 160 300 2.5 32 220 315 2.5 32 160 315 2.5 32 200 315 2.5 40 200 315 2.5 32 240 350 2.5 32 180 - Tooth form directions
- Coarse, medium or fine; choose the specific blade
- Packing and fit
- Mounting holes, supporting flange and runout require the approved machine drawing; no inferred dimensions.
REFERENCE 0307-120
Bi-Metal hacksaw blade
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
4 listed configurations · view dimensions
thickness mm | TPI — verify units and ordered drawing thickness mm TPI 0.63 14 0.63 18 0.63 24 0.63 32
REFERENCE 0307-121
Double edge hacksaw blade
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- size — verify units and ordered drawing
- 300x12.5x0.63mmx24T/32T; 300x25.0x0.63mmx24T/32T
REFERENCE 0307-122
HSS/Bi-metal power hack saw blade
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
11 listed configurations · view dimensions
Width | Thick. | TPI — verify units and ordered drawing Width Thick. TPI 25 1.25 14/10 25 1.6 14/10 32 1.25 14/10 32 1.6 14/10 32 1.6 10/6 35 1.8 6/4 32 1.6 6/4 38 1.2 6/4 38 1.8 6/4 40 2 6/4 40 2.5 6/4
REFERENCE 0307-123
HSS hacksaw blade ( HCS available )
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
4 listed configurations · view dimensions
thickness mm | TPI — verify units and ordered drawing thickness mm TPI 0.63 14 0.63 18 0.63 24 0.63 32
REFERENCE 0307-124
Reamer tools
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
15 listed configurations · view dimensions
Tipped Carbide Parallel Machine Reamer — d | d1 | L — verify units and ordered drawing Tipped Carbide Parallel Machine Reamer — d d1 L 6 5.6 93 7 7.1 109 8 8 117 9 9 125 10 10 133 11 10 142 12 10 151 13 10 151 14 12.5 160 15 12.5 162 16 12.5 170 17 14 175 18 14 182 19 16 189 20 16 195 - Dimensions and configurations
15 listed configurations · view dimensions
Taper Shank Bridge Reamer (ANSI) — size | I | L — verify units and ordered drawing Taper Shank Bridge Reamer (ANSI) — size I L 7/16 4-3/8 8-1/4 1/2 5-1/8 9 9/16 5-1/8 9 5/8 6-1/8 10 11/16 7-1/8 11-3/4 3/4 7-3/8 12 13/16 7-3/8 12 7/8 7-3/8 12 15/16 7-3/8 12 1 7-3/8 12 1-1/16 7-3/8 12 1-1/8 7-3/8 12 1-3/16 7-3/8 12 1-1/4 7-3/8 12 1-5/8 7-3/8 12 - Dimensions and configurations
6 listed configurations · view dimensions
Square Shank Morse Taper Reamer (ANSI) — size | I | L — verify units and ordered drawing Square Shank Morse Taper Reamer (ANSI) — size I L 0 2-1/4 3-3/4 1 3 5 2 3-1/2 6 3 4-1/4 7-1/4 4 5-1/4 8-1/2 5 6-1/4 9-3/4 - Dimensions and configurations
39 listed configurations · view dimensions
Hand Reamer (ANSI) — size | I | L — verify units and ordered drawing Hand Reamer (ANSI) — size I L 1/8 1-1/2 3 9/64 1-5/8 3-1/4 5/32 1-5/8 3-1/4 11/64 1-3/4 3-1/2 3/16 1-3/4 3-1/2 13/64 1-7/8 3-3/4 7/32 1-7/8 3-3/4 15/64 2 4 1/4 2 4 17/64 2-1/8 4-1/4 9/32 2-1/8 4-1/4 19/64 2-1/4 4-1/2 5/16 2-1/4 4-1/2 21/64 2-3/8 4-3/4 11/32 2-3/8 4-3/4 23/64 2-1/2 5 3/8 2-1/2 5 25/64 2-5/8 5-5/8 13/32 2-5/8 5-5/8 27/64 2-3/4 5-1/2 7/16 2-3/4 5-1/2 29/64 2-7/8 5-3/4 15/32 2-7/8 5-3/4 31/64 3 6 1/2 3 6 17/32 3-1/8 6-1/4 9/16 3-1/4 6-1/2 19/32 3-3/8 6-3/4 5/8 3-1/2 7 21/32 3-11/16 7-3/8 11/16 3-7/8 7-7/8 23/32 4-1/16 8-1/8 3/4 4-3/16 8-3/8 7/8 4-7/8 9-3/4 1 5-7/16 10-7/8 1-1/8 5-13/16 11-5/8 1-1/4 6-1/8 12-1/4 1-3/8 6-5/16 12-5/8 1-1/2 6-1/2 13 - Dimensions and configurations
29 listed configurations · view dimensions
Taper Shank Reamer (ANSI) — size | I | L — verify units and ordered drawing Taper Shank Reamer (ANSI) — size I L 1/4 1-1/2 6 5/16 1-1/2 6 3/8 1-3/4 7 7/16 1-3/4 7 1/2 2 8 17/32 2 8 9/16 2 8 19/32 2 8 5/8 2-1/4 9 21/32 2-1/4 9 11/16 2-1/4 9 23/32 2-1/4 9 3/4 2-1/4 9-1/2 25/32 2-1/2 9-1/2 13/16 2-1/2 9-1/2 27/32 2-1/2 9-1/2 7/8 2-5/8 10 29/32 2-5/8 10 15/16 2-5/8 10 31/32 2-5/8 10 1 2-3/4 10-1/2 1-1/16 2-3/4 10-1/2 1-1/8 2-7/8 11 1-3/16 2-7/8 11 1-1/4 3 11-1/2 1-5/16 3 11-1/2 1-3/8 3-1/4 12 1-7/16 3-1/4 12 1-1/2 3-1/2 12-1/2 - Square Shank Reamer (ANSI) — size | I | L — verify units and ordered drawing
- 11/16 | 3-7/8 | 7-3/4
- Dimensions and configurations
17 listed configurations · view dimensions
Pin Rramer (ANSI) — size | I | L — verify units and ordered drawing Pin Rramer (ANSI) — size I L 7/0 13/16 1-13/16 6/0 15/16 1-15/16 5/0 1-3/16 2-3/16 4/0 1-5/16 2-5/16 3/0 1-5/16 2-5/16 2/0 1-9/16 2-9/16 0 1-11/16 2-15/16 1 1-11/16 2-15/16 2 1-15/16 3-3/16 3 2-5/16 3-11/16 4 2-9/16 4-1/16 5 2-13/16 4-5/16 6 3-11/16 5-7/16 7 4-7/16 6-5/16 8 5-3/16 7-3/16 9 6-1/16 8-5/16 10 6-13/16 9-5/16 - Dimensions and configurations
3 listed configurations · view dimensions
Parallel Rramer (ANSI) — D | A | B — verify units and ordered drawing Parallel Rramer (ANSI) — D A B 1/8 7/8 3-1/2 3/16 1-1/8 4-1/2 3/4 2-1/2 9-1/2 - Dimensions and configurations
10 listed configurations · view dimensions
Taper-shank car reamer direction — size | I | L — verify units and ordered drawing Taper-shank car reamer direction — size I L 5/16 2-3/4 5-11/16 3/8 2-3/4 5-11/16 7/16 3-1/2 6-15/16 1/2 4 7-9/16 9/16 4 7-9/16 5/8 4-1/2 8-1/16 11/16 4-1/2 8-13/16 3/4 5 9-1/2 13/16 5 9-1/2 15/16 5 9-1/2
REFERENCE 0307-125
DIN327 HSS 2 flutes end mills
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Construction / finish choices
- Ground; TiN; ZrN; M35; M42; Solid Carbide; confirm availability for each size
- Dimensions and configurations
35 listed configurations · view dimensions
Dia.mill | Dia.Shk | L2 Flute | L1 Oal — verify units and ordered drawing Dia.mill Dia.Shk L2 Flute L1 Oal 1.0 6 3 47 1.5 6 4 48 2 6 4 48 2.5 6 5 49 3 6 5 49 4 6 7 51 4.5 6 8 52 5 6 8 52 5.5 6 8 52 6 6 8 52 6.5 10 10 60 7 10 10 60 7.5 10 11 61 8 10 11 61 8.5 10 13 63 9 10 13 63 10 10 13 63 11 12 16 73 12 12 16 73 13 12 16 73 14 12 16 73 15 12 16 73 16 16 19 79 17 16 19 79 18 16 19 79 20 20 22 88 21 20 22 88 22 20 22 88 23 20 22 88 24 25 26 102 25 25 26 102 26 25 26 102 28 25 26 102 30 25 26 102 32 32 32 112
REFERENCE 0307-126
DIN844 HSS 4 flutes end mills
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Construction / finish choices
- Ground; TiN; ZrN; M35; M42; Solid Carbide; confirm availability for each size
- Dimensions and configurations
28 listed configurations · view dimensions
Dia.mill | Dia.Shk | L2 Flute | L1 Oal — verify units and ordered drawing Dia.mill Dia.Shk L2 Flute L1 Oal 1.5 6 7 51 2 6 7 51 3 6 8 52 4 6 11 55 5 6 13 57 6 6 13 57 7 10 16 66 8 10 19 69 9 10 19 69 10 10 22 72 11 12 22 79 12 12 26 83 13 12 26 83 14 12 26 83 15 12 26 83 16 16 32 92 17 16 32 92 18 16 32 92 20 20 38 104 21 20 38 104 22 20 38 104 23 20 38 104 24 25 45 121 25 25 45 121 26 25 45 121 28 25 45 121 30 25 45 121 32 32 53 133
REFERENCE 0307-127
DIN844 HSS 4 flutes long end mills
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Construction / finish choices
- Ground; TiN; ZrN; M35; M42; Solid Carbide; confirm availability for each size
- Dimensions and configurations
18 listed configurations · view dimensions
Dia.mill | Dia.Shk | L2 Flute | L1 Oal — verify units and ordered drawing Dia.mill Dia.Shk L2 Flute L1 Oal 2 6 10 54 3 6 12 56 4 6 19 63 5 6 24 68 6 6 24 68 7 10 30 80 8 10 38 88 10 10 45 95 12 12 53 110 14 12 53 110 16 16 63 123 18 16 63 123 20 20 75 141 22 20 75 141 25 25 90 166 28 25 90 166 30 25 90 166 32 32 106 186
REFERENCE 0307-128
HSS 2 flutes single end mills medium / long length
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together. Confirm the cutting, overall and shank dimensions individually; differently labelled subsections require a current drawing.
- Dimensions and configurations
18 listed configurations · view dimensions
Dia. | L1 Oal. | L2 Flute — verify units and ordered drawing Dia. L1 Oal. L2 Flute 1/4 1 3/8 5/16 1 3/8 3/8 1 3/8 1/2 1-1/2 1/2 5/8 1-5/8 5/8 3/4 1-3/4 3/4 7/8 2 7/8 1 2-1/4 1 1-1/4 2-1/4 1-1/4 1/4 1-1/2 3/8 5/16 1-1/2 3/8 3/8 1-1/2 3/8 1/2 2 1/2 5/8 2 5/8 3/4 2-1/4 3/4 7/8 2-1/4 7/8 1 3 1 1-1/4 3 1-1/4
REFERENCE 0307-129
HSS 2 flutes single end mills regular length
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
41 listed configurations · view dimensions
Dia.mill | Dia.shk | L1 Oal | L2 Flute — verify units and ordered drawing Dia.mill Dia.shk L1 Oal L2 Flute 1/16 1/16 1-1/2 1/4 1/16 1/8 1-1/2 1/4 3/32 1/8 1-1/2 3/8 1/8 1/8 1-1/2 1/2 1/8 3/8 2-5/16 3/8 5/32 3/16 2 9/16 3/16 3/16 2 5/8 3/16 3/8 2-5/16 7/16 7/32 1/4 2-1/2 5/8 1/4 1/4 2-1/2 3/4 1/4 3/8 2-5/16 1/2 9/32 5/16 2-1/2 3/4 5/16 5/16 2-1/2 13/16 5/16 3/8 2-5/16 9/16 3/8 3/8 2-1/2 7/8 3/8 3/8 2-5/16 9/16 7/16 7/16 2-1/2 7/8 7/16 3/8 2-1/2 13/16 1/2 1/2 3 1 9/16 9/16 3 1-1/4 9/16 1/2 3-1/8 1-1/8 5/8 5/8 3-1/2 1-1/4 5/8 1/2 3-1/8 1-1/8 5/8 5/8 3-7/16 1-5/16 11/16 3/4 4 1-1/2 11/16 5/8 3-7/16 1-5/16 3/4 1/2 3-7/16 1-5/16 3/4 3/4 4 1-1/2 3/4 5/8 3-7/16 1-5/16 3/4 3/4 3-9/16 1-5/16 13/16 5/8 3-5/8 1-1/2 7/8 5/8 3-5/8 1-1/2 7/8 3/4 3-3/4 1-1/2 7/8 7/8 3-3/4 1-1/2 15/16 3/4 3-3/4 1-1/2 1 5/8 3-5/8 1-1/2 1 3/4 3-3/4 1-1/2 1 7/8 4-1/8 1-5/8 1-1/8 1 4-1/8 1-5/8 1-1/4 1 4-1/8 1-5/8 1 1 4 1-1/2
REFERENCE 0307-130
HSS 2 flutes double end mills
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
20 listed configurations · view dimensions
Dia.mill | Dia.shk | L1 Oal | L2 Flute — verify units and ordered drawing Dia.mill Dia.shk L1 Oal L2 Flute 1/8 3/8 3-1/16 3/8 5/32 3/8 3-1/8 7/16 3/16 3/8 3-1/8 7/16 7/32 3/8 3-1/8 1/2 1/4 3/8 3-1/8 1/2 9/32 3/8 3-1/8 9/16 5/16 3/8 3-1/8 9/16 11/32 3/8 3-1/8 9/16 3/8 3/8 3-1/8 9/16 13/32 1/2 3-3/4 13/16 7/16 1/2 3-3/4 13/16 15/32 1/2 3-3/4 13/16 1/2 1/2 3-3/4 13/16 9/16 5/8 4-1/2 1-1/8 5/8 5/8 4-1/2 1-1/8 11/16 3/4 5 1-5/16 3/4 3/4 5 1-5/16 7/8 7/8 5-1/2 1-9/16 15/16 1 5-7/8 1-5/8 1 1 5-7/8 1-5/8
REFERENCE 0307-131
HSS 4 flutes single / double end mills (center cutting)
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
13 listed configurations · view dimensions
Dia. | Dia.shk | L2 Flute | L1 Oal — verify units and ordered drawing Dia. Dia.shk L2 Flute L1 Oal 1/8 3/8 3/8 2-5/16 3/16 3/8 1/2 2-3/8 1/4 3/8 5/8 2-7/16 5/16 3/8 3/4 2-1/2 3/8 3/8 3/4 2-1/2 1/2 1/2 1-1/4 3-1/4 5/8 5/8 1-5/8 3-3/4 3/4 3/4 1-5/8 3-7/8 7/8 7/8 1-7/8 4-1/8 1 1 2 4-1/2 1 1 3 5-1/2 1-1/8 1 2 4-1/2 1-1/4 1-1/4 3 5-1/2
REFERENCE 0307-132
DIN845 HSS morse std. / long morse taper shank end mills
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
38 listed configurations · view dimensions
Dia. | L2 Flute | L1 Oal | Morse taper No. — verify units and ordered drawing Dia. L2 Flute L1 Oal Morse taper No. 10.0 22 92 1 12.0 26 96 1 13.0 26 96 1 14.0 26 111 2 15.0 26 111 2 16.0 32 117 2 18.0 32 117 2 20.0 38 123 2 22.0 38 123 2 25.0 45 147 3 28.0 45 147 3 30.0 45 147 3 35.0 53 178 4 40.0 63 188 4 45.0 63 188 4 50.0 75 233 5 55.0 75 233 5 60.0 75 233 5 65.0 90 248 5 10.0 45 115 1 12.0 53 123 1 13.0 53 123 1 14.0 53 138 2 15.0 53 138 2 16.0 63 148 2 18.0 63 148 2 20.0 75 160 2 22.0 75 160 2 25.0 90 192 3 28.0 90 192 3 30.0 90 192 3 35.0 106 231 4 40.0 125 250 4 45.0 125 250 4 50.0 150 308 5 55.0 150 308 5 60.0 150 308 5 65.0 180 366 5
REFERENCE 0307-133
DIN1837 HSS and solid carbide slitting saw blade
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
32 listed configurations · view dimensions
Out Dia. | Plate thick | Hole Dia | No.of teeth | No.of teeth — verify units and ordered drawing Out Dia. Plate thick Hole Dia No.of teeth No.of teeth 63 0.5 16 32 80 63 0.8 16 32 80 63 1.0 16 32 100 63 1.2 16 24 80 63 1.6 16 24 80 63 2.0 16 24 80 63 2.5 16 20 64 80 1.2 22 32 100 80 1.6 22 32 100 80 2.0 22 24 80 80 2.5 22 24 80 80 3.0 22 24 80 100 1.6 27 32 100 100 2.0 27 32 100 100 2.5 27 24 80 100 3.0 27 24 80 100 3.5 27 24 80 125 2.0 27 40 128 125 2.5 27 32 100 125 3.0 27 32 100 125 3.5 27 32 100 125 4.0 27 32 100 160 2.5 32 40 128 160 3.0 32 40 128 160 3.5 32 32 100 160 4.0 32 32 100 160 4.5 32 32 100 200 3.0 32 40 128 200 3.5 32 40 128 200 4.0 32 40 128 200 4.5 32 40 128 200 5.0 32 40 128
REFERENCE 0307-134
Rotary burrs type M - Conical Point
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing Dia. blade Length blade Oal. Dia. Shank 6 18 63 6 8 20 65 6 10 20 65 6 12 25 70 6 16 25 70 6
REFERENCE 0307-135
Rotary burrs type G - Arc pointd
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing Dia. blade Length blade Oal. Dia. Shank 6 18 63 6 8 20 63 6 10 20 65 6 12 25 70 6 16 25 70 6
REFERENCE 0307-136
Rotary burrs type A - Cylindrical
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing Dia. blade Length blade Oal. Dia. Shank 6 16 61 6 8 20 65 6 10 20 65 6 12 25 70 6 16 25 70 6
REFERENCE 0307-137
Rotary burrs type F - Arc Cylindrical with round head
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing Dia. blade Length blade Oal. Dia. Shank 6 18 63 6 8 20 63 6 10 20 65 6 12 25 70 6 16 25 70 6
REFERENCE 0307-138
Rotary burrs type B - Cylindrical with end cutter
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing Dia. blade Length blade Oal. Dia. Shank 6 16 61 6 8 20 65 6 10 20 65 6 12 25 70 6 16 25 70 6
REFERENCE 0307-139
Rotary burrs type C - Cylindrical with Ball top
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing Dia. blade Length blade Oal. Dia. Shank 6 16 61 6 8 20 65 6 10 20 65 6 12 25 70 6 16 25 70 6
REFERENCE 0307-140
Rotary burrs type D - Sphere
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing Dia. blade Length blade Oal. Dia. Shank 6 5 50 6 8 7 52 6 10 9 54 6 12 10 56 6 16 14 60 6
REFERENCE 0307-141
Rotary burrs type K - 90° Conical
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing Dia. blade Length blade Oal. Dia. Shank 6 6 51 6 8 8 54 6 10 10 55 6 12 11 57 6 16 13 60 6
REFERENCE 0307-142
Rotary burrs type H - Torch shape
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing Dia. blade Length blade Oal. Dia. Shank 6 18 63 6 8 20 65 6 10 25 70 6 12 32 76 6 16 36 80 6
REFERENCE 0307-143
Rotary burrs type L - Conical with Round head
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing Dia. blade Length blade Oal. Dia. Shank 6 16 61 6 8 22 67 6 10 25 70 6 12 28 73 6 16 33 78 6
REFERENCE 0307-144
Rotary burrs type E - Elliptic Cylindrical
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing Dia. blade Length blade Oal. Dia. Shank 6 10 55 6 8 13 58 6 10 16 61 6 12 22 65 6 16 25 70 6
REFERENCE 0307-145
HSS G&E metric drill blank hardened and ground
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
135 listed configurations · view dimensions
Dia | L1 Oal — verify units and ordered drawing Dia L1 Oal 1 34 1.05 34 1.1 36 1.15 36 1.2 38 1.25 38 1.3 38 1.35 40 1.4 40 1.45 40 1.5 40 1.55 43 1.6 43 1.65 43 1.7 43 1.75 46 1.8 46 1.85 46 1.9 46 1.95 49 2 49 2.05 49 2.1 49 2.15 53 2.2 53 2.25 53 2.3 53 2.35 53 2.4 57 2.45 57 2.5 57 2.55 57 2.6 57 2.65 57 2.7 61 2.75 61 2.8 61 2.9 61 3 61 3.1 65 3.2 65 3.3 65 3.4 70 3.5 70 3.6 70 3.7 70 3.75 70 3.8 75 3.9 75 4 75 4.1 75 4.2 75 4.25 75 4.3 80 4.4 80 4.5 80 4.6 80 4.7 80 4.75 80 4.8 86 4.9 86 5 86 5.1 86 5.2 86 5.25 86 5.3 86 5.4 93 5.5 93 5.6 93 5.7 93 5.75 93 5.8 93 5.9 93 6 93 6.1 101 6.2 101 6.3 101 6.4 101 6.5 101 6.6 101 6.7 101 6.75 101 6.8 109 6.9 109 7 109 7.1 109 7.2 109 7.3 109 7.4 109 7.5 109 7.6 117 7.7 117 7.75 117 7.8 117 7.9 117 8 117 8.1 117 8.2 117 8.25 117 8.3 117 8.4 117 8.5 117 8.6 125 8.7 125 8.75 125 8.8 125 8.9 125 9 125 9.1 125 9.2 125 9.3 125 9.4 125 9.5 125 9.6 133 9.7 133 9.75 133 9.8 133 9.9 133 10 133 10.5 133 11 142 11.5 142 12 151 13 151 13.5 160 14 160 15 169 15.5 178 16 178 16.5 184 17 184 17.5 191 18 191 19 198 20 205
REFERENCE 0307-146
HSS tool bits
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Metric — verify units and ordered drawing
- 4.0x100; 4.0x150; 4.0x200; 6.0x100; 6.0x150; 6.0x200; 8.0x100; 8.0x150; 8.0x200; 10.0x100; 10.0x150; 10.0x200; 12.0x100; 12.0x150; 12.0x200; 14.0x100; 14.0x150; 14.0x200; 16.0x100; 16.0x150; 16.0x200; 18.0x100; 18.0x150; 18.0x200; 20.0x100; 20.0x150; 20.0x200; 22.0x100; 22.0x150; 22.0x200; 24.0x100; 24.0x150; 24.0x200; 26.0x100; 26.0x150; 26.0x200
- Inch — verify units and ordered drawing
- 5/32”x4”; 5/32 x 6; 5/32 x 8; 1/4 x 4; 1/4 x 6; 1/4 x 8; 5/16 x 4; 5/16 x 6; 5/16 x 8; 3/8 x 4; 3/8 x 6; 3/8 x 8; 1/2 x 4; 1/2 x 6; 1/2 x 8; 9/16 x 4; 9/16 x 6; 9/16 x 8; 5/8 x 4; 5/8 x 6; 5/8 x 8; 11/16 x 4; 11/16 x 6; 11/16 x 8; 25/32 x 4; 25/32 x 6; 25/32 x 8; 7/8 x 4; 7/8 x 6; 7/8 x 8; 15/16 x 4; 15/16 x 6; 15/16 x 8; 1 x 4; 1 x 6; 1 x 8
REFERENCE 0307-147
HSS Rectangular tool bits
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Metric — verify units and ordered drawing
- 3.0x10.0x200; 5.0x10.0x200; 6.0x10.0x200; 3.0x12.0x200; 5.0x12.0x200; 6.0x12.0x200; 8.0x12.0x200; 10.0x12.0x200; 3.0x15.0x200; 5.0x15.0x200; 6.0x15.0x200; 8.0x15.0x200; 10.0x15.0x200; 3.0x20.0x200; 5.0x20.0x200; 6.0x20.0x200; 8.0x20.0x200; 10.0x20.0x200; 12.0x20.0x200; 15.0x20.0x200; 10.0x25.0x200; 12.0x25.0x200; 15.0x25.0x200; 20.0x25.0x200
- Inch — verify units and ordered drawing
- 1/8”x3/8”x8”; 3/16x3/8x8; 1/4x3/8x8; 1/8x1/2x8; 3/16x1/2x8; 1/4x1/2x8; 5/16x1/2x8; 3/8x1/2x8; 1/8x5/8x8; 3/16x5/8x8; 1/4x5/8x8; 5/16x5/8x8; 3/8x5/8x8; 1/8x3/4x8; 3/16x3/4x8; 1/4x3/4x8; 5/16x3/4x8; 3/8x3/4x8; 1/2x3/4x8; 5/8x3/4x8; 3/8x1x8; 1/2x1x8; 5/8x1x8; 3/4x1x8
REFERENCE 0307-148
Thin diamond cutting/grinding discs
A ceramic/stone direction combines a thin body with a bevel-cutting application.
- Diameter options
- 115 or 125 mm
- Tooth depth
- 25 mm
- Edge-cut reference
- 45°
REFERENCE 0307-149
Carbide-tipped soft-tile and glass drills
A carbide tip and spiral relief serve soft ceramic, mirror and glass work. Use water and low-speed rotary drilling; hammer action and hard-tile use are excluded for this direction.
- Sizes
- 1/8, 3/16, 1/4, 5/16, 3/8, 1/2 inch
- Shank
- Hexagonal
REFERENCE 0307-150
Double-row diamond grinding cups
Two rows of segments and cooling holes are described for concrete and field-stone grinding. Confirm approved wet/dry use and machine fit.
- Diameter options
- 100, 115, 125, 150, 180 mm
REFERENCE 0307-151
Double-row concrete grinding cups
A second double-row cup direction has the same stated diameter selection; verify segment layout from the approved drawing.
- Diameter options
- 100, 115, 125, 150, 180 mm
REFERENCE 0307-152
Eight-segment diamond grinding cups
A heat-treated cup with eight grinding segments is described for stone/concrete finishing.
- Diameter options
- 100, 115, 125, 150, 180 mm
- Segment count
- 8
REFERENCE 0307-153
Vacuum-brazed diamond metal-cutting discs
A vacuum-brazed diamond direction specifically addresses metal cutting.
- Diameter options
- 115, 125, 150, 180, 230 mm
REFERENCE 0307-154
Multi-material vacuum-brazed diamond discs
A separate brazed direction lists marble, ceramics, PVC, steel rod, nailed wood and plaster as application references. Confirm the actual material and blade rating.
- Diameter options
- 115, 125, 150, 180, 230 mm
REFERENCE 0307-155
Thin turbo diamond discs
A turbo-rim direction is described for concrete products. Confirm sintered versus welded construction for the selected blade.
- Diameter options
- 115, 125, 150, 180, 230 mm
REFERENCE 0307-156
Thin segmented diamond discs
A segmented direction is described for cured concrete, aggregate concrete and concrete tiles. Confirm the actual joining process.
- Diameter options
- 115, 125, 150, 180, 230 mm
REFERENCE 0307-157
Thin continuous-rim diamond discs
A continuous-rim direction for ceramics, granite tile and marble is described for wet use.
- Diameter options
- 115, 125, 150, 180, 230 mm
- Use direction
- Wet cutting
REFERENCE 0307-158
Brazed-diamond hole beveling tools
A beveling tool enlarges and rounds an already-started hole in porcelain, ceramic or stone. It is not the starting core drill.
- Head reference
- 48 mm / 1-7/8 inch
- Thread
- 5/8–11
- Hole-enlargement reference
- Up to 50 mm; confirm tool geometry and starting hole
REFERENCE 0307-159
Wax-core vacuum-brazed diamond drill assortment
A wax-filled core, spiral relief and quick-change hex shank distinguish this diamond set. Water is instructed for granite and hard masonry.
- Set / sizes
- 5 pieces: 1/4, 5/16, 3/8, 1/2, 9/16 inch
- Diamond length
- 10 mm
- Approximate working depth
- 30 mm
- Shank
- 1/4 inch quick-change hex
REFERENCE 0307-160
DIN8039 masonry drill , Milled
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dia x L1 Oal — dimensional units and current drawing to confirm
- 3x60; 4x75; 5x85; 5.5x85; 6.0x100; 6.5x100; 7x100; 8x120; 9x120; 10x120; 11x150; 12x150; 13x150; 14x150; 15x150; 16x160; 17x160; 18x160; 19x160; 20x160; 21x160; 22x160; 23x160; 24x160; 25x160; 5x150; 6x150; 7x150; 8x150; 9x150; 10x150; 6x200; 7x200; 8x200; 9x200; 10x200; 11x200; 12x200; 13x200; 14x200; 15x200; 16x200; 17x200; 18x200; 19x200; 20x200; 21x200; 22x200; 23x200; 24x200; 25x200; 26x200; 5x300; 6x300; 7x300; 8x300; 9x300; 10x300; 11x300; 12x300; 13x300; 14x300; 15x300; 16x300; 17x300; 18x300; 19x300; 20x300; 21x300; 22x300; 24x300; 25x300; 26x300; 6x400; 7x400; 8x400; 9x400; 10x400; 11x400; 12x400; 13x400; 14x400; 15x400; 16x400; 17x400; 18x400; 19x400; 20x400; 21x400; 22x400; 23x400; 24x400; 25x400; 26x400; 28x400; 30x400; 6x600; 7x600; 8x600; 9x600; 10x600; 11x600; 12x600; 13x600; 14x600; 15x600; 16x600; 17x600; 18x600; 19x600; 20x600; 21x600; 22x600; 23x600; 24x600; 25x600; 26x600
REFERENCE 0307-161
DIN8039 rock drill , Cold roll-forged
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
114 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 3.0 60 3.5 75 4.0 75 5.0 85 5.5 85 3.0 100 4.0 100 5.0 100 5.5 100 6.0 100 6.5 100 7.0 100 8.0 120 9.0 120 9.5 120 10.0 120 4.0 150 5.0 150 5.5 150 6.0 150 6.5 150 7.0 150 8.0 150 9.0 150 9.5 150 10.0 150 11.0 150 12.0 150 13.0 150 14.0 150 15.0 150 16.0 150 17.0 160 18.0 160 20.0 160 22.0 160 23.0 160 25.0 160 6.0 200 6.5 200 7.0 200 8.0 200 9.0 200 9.5 200 10.0 200 11.0 200 12.0 200 13.0 200 14.0 200 15.0 200 16.0 200 17.0 200 18.0 200 20.0 200 22.0 200 23.0 200 25.0 200 6.0 300 6.5 300 7.0 300 8.0 300 9.0 300 9.5 300 10.0 300 11.0 300 12.0 300 13.0 300 14.0 300 15.0 300 16.0 300 17.0 300 18.0 300 20.0 300 22.0 300 23.0 300 25.0 300 6.0 400 6.5 400 7.0 400 8.0 400 9.0 400 9.5 400 10.0 400 11.0 400 12.0 400 13.0 400 14.0 400 15.0 400 16.0 400 17.0 400 18.0 400 20.0 400 22.0 400 23.0 400 25.0 400 6.0 600 6.5 600 7.0 600 8.0 600 9.0 600 9.5 600 10.0 600 11.0 600 12.0 600 13.0 600 14.0 600 15.0 600 16.0 600 17.0 600 18.0 600 20.0 600 22.0 600 23.0 600 25.0 600
REFERENCE 0307-162
DIN8039 rotary and impact drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements. Metric and fractional schedules remain separate nominal directions; confirm the unit for each ordered dimension.
- Dimensions and configurations
66 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 3.0 60 3.5 75 4.0 75 5.0 85 5.5 85 6.0 100 6.5 100 7.0 100 8.0 120 9.0 120 9.5 120 10.0 120 12.0 150 13.0 150 14.0 150 15.0 150 16.0 150 17.0 160 18.0 160 20.0 160 22.0 160 23.0 160 25.0 160 6.0 400 6.5 400 7.0 400 8.0 400 9.0 400 9.5 400 10.0 400 11.0 400 12.0 400 13.0 400 14.0 400 15.0 400 16.0 400 17.0 400 18.0 400 20.0 400 22.0 400 23.0 400 25.0 400 1/8 2-3/8 9/64 3 5/32 3 3/16 3-3/8 7/32 3-3/8 15/64 4 1/4 4 9/32 4 5/16 4-3/4 11/32 4-3/4 3/8 4-3/4 13/32 4-3/4 7/16 6 15/32 6 1/2 6 9/16 6 19/32 6 5/8 6 11/16 6-3/8 23/32 6-3/8 3/4 6-3/8 7/8 6-3/8 15/16 6-3/8 1 6-3/8
REFERENCE 0307-163
Universal masonry drills, milled direction
A universal drilling direction includes diameter/overall-length pairs. Confirm units and the workpiece before ordering.
- Diameter / overall-length references
- 3 / 70; 3.5/4 / 75; 5/5.5 / 85; 6/6.5/7 / 100; 8/9/9.5/10 / 120; 12/13/14/15/16 / 150; 17/18/20 / 160
- Standard reference
- DIN 8039
REFERENCE 0307-164
Masonry drill - tapcon style
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
7 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 5/32” 3-1/2” 5/32 4-1/2 5/32 5-1/2 3/16 3-1/2 3/16 4-1/2 3/16 5-1/2 3/16 6-1/2
REFERENCE 0307-165
DIN8039 concrete drill, black&silver
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
42 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 3.0 60 3.5 75 4.0 75 5.0 85 5.5 85 6.0 100 6.5 100 7.0 100 8.0 120 9.0 120 9.5 120 10.0 120 12.0 150 13.0 150 14.0 150 15.0 150 16.0 150 17.0 160 18.0 160 20.0 160 22.0 160 23.0 160 25.0 160 6.0 400 6.5 400 7.0 400 8.0 400 9.0 400 9.5 400 10.0 400 11.0 400 12.0 400 13.0 400 14.0 400 15.0 400 16.0 400 17.0 400 18.0 400 20.0 400 22.0 400 23.0 400 25.0 400
REFERENCE 0307-166
DIN8039 rock drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
24 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 1/8” 2-3/8” 9/64 3 5/32 3 3/16 3-3/8 7/32 3-3/8 15/64 4 1/4 4 9/32 4 5/16 4-3/4 11/32 4-3/4 3/8 4-3/4 13/32 4-3/4 7/16 6 15/32 6 1/2 6 9/16 6 19/32 6 5/8 6 11/16 6-3/8 23/32 6-3/8 3/4 6-3/8 7/8 6-3/8 15/16 6-3/8 1 6-3/8
REFERENCE 0307-167
Slow spiral masonry drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
16 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 1/8” 3” 3/16 4 1/4 4 5/16 4 3/8 4 1/2 4 1/4 6 5/16 6 3/8 6 7/16 6 1/2 6 9/16 6 5/8 6 3/4 6 7/8 6 1 6
REFERENCE 0307-168
Fast spiral masonry drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
14 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 1/8” 3 3/16 4 1/4 4 5/16 4 3/8 4 1/2 4 1/4 6 5/16 6 3/8 6 7/16 6 1/2 6 9/16 6 5/8 6 3/4 6
REFERENCE 0307-169
Universal drill bits with hex shank
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
13 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 3.0 70 3.5 75 4.0 75 5.0 85 5.5 85 6.0 100 6.5 100 7.0 100 8.0 120 9.0 120 9.5 120 10.0 120 12.0 150
REFERENCE 0307-170
Glass and ceramic drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- Cross; confirm availability for each size
- Dia. — verify units and ordered drawing
- 3×60mm; 4×60; 5×70; 6×75; 7×75; 8×80; 9×85; 10×85; 12×100; 13×100; 14×100; 16×100; 18×100; 20×110; 22×110; 25×110
REFERENCE 0307-171
Chisel for hammer
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
3 listed configurations · view dimensions
size | shank | type — verify units and ordered drawing size shank type 400 H30 Point 410 H30 Point 410x35 H30 Flat
REFERENCE 0307-172
Hex shank chisel
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
4 listed configurations · view dimensions
size | shank | type — verify units and ordered drawing size shank type 400 H28 Point 30x400 H28 Flat 35x400 H28 Flat 80x400 H28 Flat
REFERENCE 0307-173
Max&Hex chisel (For machine )
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
2 listed configurations · view dimensions
size | shank | type — verify units and ordered drawing size shank type 3.2x280 H17 Point 25x280 H17 Flat
REFERENCE 0307-174
SDS plus shank ground rod driver
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size — verify units and ordered drawing
- 3/4"; 5/8"
REFERENCE 0307-175
Heavy duty hollow core drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Size — verify units and ordered drawing
- 40; 45; 50; 55; 65; 75; 80; 100; 115; 125; 150
REFERENCE 0307-176
Diamond core bits ( G type)
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
24 listed configurations · view dimensions
Dia. mm | Effective depth | Segment height | Connection — verify units and ordered drawing Dia. mm Effective depth Segment height Connection 19 40+150 7.5 M12 20 40+150 7.5 M12 25 40+150 7.5 M12 30 40+150 7.5 M12 35 40+150 7.5 M12 40 40+150 7.5 M12 45 40+150 7.5 M12 50 40+150 7.5 M12 53 40+150 7.5 M12 60 40+150 7.5 M12 65 40+150 7.5 M12 70 40+150 7.5 M12 75 40+150 7.5 M12 80 40+150 7.5 M12 85 40+150 7.5 M12 90 40+150 7.5 M12 100 40+150 7.5 M12 108 40+150 7.5 M12 110 40+150 7.5 M12 120 40+150 7.5 M12 130 40+150 7.5 M12 150 40+150 7.5 M12 158 40+150 7.5 M12 165 40+150 7.5 M12
REFERENCE 0307-177
Diamond core bits (F glass type)
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
12 listed configurations · view dimensions
Dia. mm | Effective depth | Segment height | Connection — verify units and ordered drawing Dia. mm Effective depth Segment height Connection 5 30/50 8/10 round shank 6 30/50 8/10 round shank 8 30/50 8/10 round shank 10 30/50 8/10 triangular shank 12 30/50 8/10 triangular shank 14 30/50 8/10 triangular shank 16 30/50 8/10 hexagonal shank 18 30/50 8/10 hexagonal shank 20 30/50 8/10 hexagonal shank 25 30/50 8/10 1/2” BSP 30 30/50 8/10 1/2” BSP 35 30/50 8/10 1/2” BSP
REFERENCE 0307-178
Sintered and laser brazed diamond hollow annular bits
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
3 listed configurations · view dimensions
Dia. | cutting depth | thread — verify units and ordered drawing Dia. cutting depth thread 68 65 M16 82 65 M16 25 150 M22
REFERENCE 0307-179
Vacuum brazed diamond hole saw M14 thread
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
7 listed configurations · view dimensions
Dia. | Cutting depth | Total length — verify units and ordered drawing Dia. Cutting depth Total length 5 30 70 6 30 70 8 40 80 10 40 80 12 40 80 14 40 80 16 40 80
REFERENCE 0307-180
Electro-plated diamond hole saw
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
11 listed configurations · view dimensions
Dia | Cutting depth — verify units and ordered drawing Dia Cutting depth 18 45 22 45 25 45 35 45 45 45 53 45 60 45 65 45 68 45 74 45 83 45
REFERENCE 0307-181
Vacuum brazed diamond hole saw M14 thread
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
101 listed configurations · view dimensions
Dia. | Thread — verify units and ordered drawing Dia. Thread 20 M14 21 M14 22 M14 23 M14 24 M14 25 M14 26 M14 27 M14 28 M14 29 M14 30 M14 31 M14 32 M14 33 M14 34 M14 35 M14 36 M14 37 M14 38 M14 39 M14 40 M14 41 M14 42 M14 43 M14 44 M14 45 M14 46 M14 47 M14 48 M14 49 M14 50 M14 51 M14 52 M14 53 M14 54 M14 55 M14 56 M14 57 M14 58 M14 59 M14 60 M14 61 M14 62 M14 63 M14 64 M14 65 M14 66 M14 67 M14 68 M14 69 M14 70 M14 71 M14 72 M14 73 M14 74 M14 75 M14 76 M14 77 M14 78 M14 79 M14 80 M14 81 M14 82 M14 83 M14 84 M14 85 M14 86 M14 87 M14 88 M14 89 M14 90 M14 91 M14 92 M14 93 M14 94 M14 95 M14 96 M14 97 M14 98 M14 99 M14 100 M14 101 M14 102 M14 103 M14 104 M14 105 M14 106 M14 107 M14 108 M14 109 M14 110 M14 111 M14 112 M14 113 M14 114 M14 115 M14 116 M14 117 M14 118 M14 119 M14 120 M14
REFERENCE 0307-182
Tungsten carbide grit hole saw
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dia. — verify units and ordered drawing
- 33.0; 43.0; 53.0; 63.0; 68.0; 73.0; 83.0; 103.0; 113.0
REFERENCE 0307-183
Tungsten carbide grit hole saw plug&play
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
7 listed configurations · view dimensions
Dia. | Cutting depth — verify units and ordered drawing Dia. Cutting depth 33 min.55mm 43 min.55mm 53 min.55mm 68 min.55mm 73 min.55mm 83 min.55mm 103 min.55mm
REFERENCE 0307-184
Carbide grit file
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
4 listed configurations · view dimensions
Oal | Oal — verify units and ordered drawing Oal Oal 150 6” 200 8 250 10 300 12
REFERENCE 0307-185
Carbide grit blade
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- size — verify units and ordered drawing
- 50x18
REFERENCE 0307-186
Continuous-tooth carbide cement hand saws
Carbide teeth form a hand-saw direction for cement-based material. Package dimensions require confirmation.
- Length / teeth
- 700 mm / 34T; 600 mm / 30T; 550 mm / 28T
REFERENCE 0307-187
Spaced-tooth carbide cement hand saws
Carbide teeth form a hand-saw direction for cement-based material. Package dimensions require confirmation.
- Length / teeth
- 700 mm / 17T; 600 mm / 15T; 550 mm / 14T
REFERENCE 0307-188
Carbide hack saw blade
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
2 listed configurations · view dimensions
Length | Length — verify units and ordered drawing Length Length 10” 250mm 12” 300
REFERENCE 0307-189
Carbide grit reciprocating saw blade
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
2 listed configurations · view dimensions
Length | Length — verify units and ordered drawing Length Length 10” 250mm 12” 300
REFERENCE 0307-190
Carbide rod saw
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
3 listed configurations · view dimensions
Length | Length — verify units and ordered drawing Length Length 6” 150mm 10” 250 12” 300
REFERENCE 0307-191
Carbide or Diamond jig saw blade
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
2 listed configurations · view dimensions
Length | Length — verify units and ordered drawing Length Length 3” 75mm 4” 100
REFERENCE 0307-192
Carbide-tooth reciprocating blades
A 50CrV body with carbide teeth forms this sawing direction.
- Material
- 50CrV + carbide tips
- Length / tooth reference
- 6, 9 or 12 inch, each with 6T or 8T options
REFERENCE 0307-193
T41C cutting discs for natural and artificial stone
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size:mm — verify units and ordered drawing
- 100x2.5x16; 100x3.0x16; 115x2.5x22.2; 115x3.0x22.2; 125x2.5x22.2; 125x3.0x22.2; 150x2.5x22.2; 150x3.0x22.2; 180x3.0x22.2; 230x3.0x22.2
REFERENCE 0307-194
T42C depressed cutting discs for natural and artificial stone
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size:mm — verify units and ordered drawing
- 115x3.2x22.2; 125x3.2x22.2; 180x3.2x22.2; 230x3.2x22.2
REFERENCE 0307-195
T27C depressed grinding discs for matural and artificial stone
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size:mm — verify units and ordered drawing
- 100x6.0x16; 115x6.0x22.2; 125x6.0x22.2; 150x6.0x22.2; 180x6.0x22.2; 230x6.0x22.2; 115x6.0x16; 125x6.0x16; 150x6.0x16; 180x6.0x16; 230x6.0x16
REFERENCE 0307-196
Double row cup wheel
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dia. — verify units and ordered drawing
- 115
REFERENCE 0307-197
Impressed Slot Cup Wheel-Aluminum Back
Select the cup profile, abrasive segment and actual mounting arrangement. Bore and threaded-interface options are separate configurations and require the approved tool drawing and marked operating limit.
- Dimensions and configurations
4 listed configurations · view dimensions
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing Dia. Dia. Arbor Segments Seg.No 100 4” 5/8-11” · · 115 4.5” 5/8-11” · · 125 5” 5/8-11” · · 180 7” 5/8-11” · ·
REFERENCE 0307-198
Nubby Row Cup Wheel
Select the cup profile, abrasive segment and actual mounting arrangement. Bore and threaded-interface options are separate configurations and require the approved tool drawing and marked operating limit.
- Dimensions and configurations
4 listed configurations · view dimensions
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing Dia. Dia. Arbor Segments Seg.No 100 4” 7/8-5/8-11” 7x5mm 7 115 4.5” 7/8-5/8-11” 7x5mm 8 125 5” 7/8-5/8-11” 7x5mm 9 180 7” 7/8-5/8-11” 7x5mm 12
REFERENCE 0307-199
Special Fixed Cup Wheel
Select the cup profile, abrasive segment and actual mounting arrangement. Bore and threaded-interface options are separate configurations and require the approved tool drawing and marked operating limit.
- Dimensions and configurations
4 listed configurations · view dimensions
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing Dia. Dia. Arbor Segments Seg.No 100 4” 7/8-5/8-11” 7x5mm · 115 4.5” 7/8-5/8-11” 7x5mm · 125 5” 7/8-5/8-11” 7x5mm · 180 7” 7/8-5/8-11” 7x5mm —
REFERENCE 0307-200
Continuous Rim Cup Wheel
Select the cup profile, abrasive segment and actual mounting arrangement. Bore and threaded-interface options are separate configurations and require the approved tool drawing and marked operating limit.
- Dimensions and configurations
4 listed configurations · view dimensions
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing Dia. Dia. Arbor Segments Seg.No 100 4” 7/8-5/8-11” 5mm · 115 4.5” 7/8-5/8-11” 5mm · 125 5” 7/8-5/8-11” 5mm · 180 7” 7/8-5/8-11” 5mm —
REFERENCE 0307-201
Swirling Segment Cup Wheel
Select the cup profile, abrasive segment and actual mounting arrangement. Bore and threaded-interface options are separate configurations and require the approved tool drawing and marked operating limit.
- Dimensions and configurations
4 listed configurations · view dimensions
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing Dia. Dia. Arbor Segments Seg.No 100 4” 7/8-5/8-11” 5mm · 115 4.5” 7/8-5/8-11” 5mm · 125 5” 7/8-5/8-11” 5mm · 180 7” 7/8-5/8-11” 5mm ·
REFERENCE 0307-202
Fire-slot Rim Cup Wheel
Select the cup profile, abrasive segment and actual mounting arrangement. Bore and threaded-interface options are separate configurations and require the approved tool drawing and marked operating limit.
- Dimensions and configurations
4 listed configurations · view dimensions
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing Dia. Dia. Arbor Segments Seg.No 100 4” 7/8-5/8-11” 5mm · 115 4.5” 7/8-5/8-11” 5mm · 125 5” 7/8-5/8-11” 5mm · 180 7” 7/8-5/8-11” 5mm ·
REFERENCE 0307-203
Arrowed Turbo Cup Wheel-Aluminum Back
Select the cup profile, abrasive segment and actual mounting arrangement. Bore and threaded-interface options are separate configurations and require the approved tool drawing and marked operating limit.
- Dimensions and configurations
4 listed configurations · view dimensions
Dia. | Unlabelled dimension | Arbor | Segments | Seg.No — verify units and ordered drawing Dia. Unlabelled dimension Arbor Segments Seg.No 100 4” 7/8-5/8-11” — — 115 4.5” 7/8-5/8-11” — — 125 5” 7/8-5/8-11” — — 180 7” 7/8-5/8-11” — —
REFERENCE 0307-204
Rose Turbo Cup Wheel-Aluminum Back
Select the cup profile, abrasive segment and actual mounting arrangement. Bore and threaded-interface options are separate configurations and require the approved tool drawing and marked operating limit.
- Dimensions and configurations
4 listed configurations · view dimensions
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing Dia. Dia. Arbor Segments Seg.No 100 4” 5/8-11” · · 115 4.5” 5/8-11” · · 125 5” 5/8-11” · · 180 7” 5/8-11” · ·
REFERENCE 0307-205
Three-flute HSS brad-point wood drills
Fully ground HSS, a brad point, three flutes and black/gold treatment are described for natural and engineered wood.
- Diameter range
- 1.0–13.0 mm
- Shank
- 1/4 inch (6.35 mm) quick-change hex
REFERENCE 0307-206
Lightweight coated carbide wood saws
A lightweight blade direction is intended for cordless sawing; a low-friction coating is described. No energy-saving percentage is promised.
- Diameter / bore / teeth
- 125/140/150/165/184 mm; each with 22.2 mm bore and 24T
REFERENCE 0307-207
Replaceable carbide countersinks with depth stop
A free-spinning collar and replaceable drill/cutter elements provide depth adjustment for panel and wood work.
- Drill × countersink options
- 3.2 × 9.5; 3.6 × 9.5; 4.0 × 9.5 mm
- Shank
- Quick-release hex
REFERENCE 0307-208
Three-flute self-feeding wood bits
Carbon steel, a centring screw and three chip flutes form this direction.
- Diameters
- 6, 8, 10, 12, 14, 16, 18, 20, 22, 25, 28, 30, 32, 35 mm
- Length options
- 155, 230, 300, 460, 600 mm; confirm valid diameter/length pairs
- Shank
- 1/4 inch hex
REFERENCE 0307-209
Three-edge flat wood bits
Three cutting edges, electrophoretic surface treatment and a quick-change hex fitting are described.
- Diameters
- 10, 12, 14, 16, 18, 19, 20, 22, 25, 28, 30, 32, 35 mm
- Length
- 152 mm
- Shank
- 6.35 mm hex
REFERENCE 0307-210
Screw-point three-edge flat bits
The screw point distinguishes this self-feeding alternative; electrophoretic treatment and a quick-change fitting are described.
- Diameters
- 10, 12, 14, 16, 18, 19, 20, 22, 25, 28, 30, 32, 35 mm
- Length
- 152 mm
- Shank
- 6.35 mm hex
REFERENCE 0307-211
Fully ground HSS brad-point wood drills
A centre point, shoulder cutter and broad GT flute are described for hardwood drilling and chip clearance.
- Diameter range
- 3–13 mm
- Overall length range
- 90–160 mm
REFERENCE 0307-212
Carbide-tooth wood reciprocating blades
A brazed carbide-tooth direction is intended for solid/veneered wood, nailed wood, chipboard and plywood.
- Length options
- 152 or 228 mm
- TPI options
- 3, 6 or 8; confirm actual pair
REFERENCE 0307-213
PCD raised-panel router cutters
Silver-brazed PCD cutting elements form a cabinet-panel profiling direction.
- Diameter range
- 31.8–47 mm
- Cut-height range
- 9.3–14.7 mm; confirm paired drawing
REFERENCE 0307-214
Carbide-tipped profiling router cutters
Carbide-tipped profiling tools serve cabinet and wood-panel routing.
- Diameter range
- 21.8–88.9 mm
- Shank
- 12.7 mm
REFERENCE 0307-215
Hand-operated eye augers
A welded eye allows a hand crossbar to turn the screw-point auger; hardened steel with a black finish is described.
- Cut diameter
- 25 mm / 1 inch
- Overall length options
- 152–300 mm
REFERENCE 0307-216
Stub brad-point drills
Short brad-point drills for wood, plywood, fibreboard and uncoated board.
- Diameter options
- 2.38, 3.17, 4.76, 6.35, 7.94, 9.53 mm
- Overall length
- 60 mm
REFERENCE 0307-217
Two-flute straight carbide-tipped router bits
Straight carbide cutting edges serve slots and pockets in wood and wood-based panels.
- Diameter range
- 3–12 mm
- Shank
- 12.7 mm
REFERENCE 0307-218
Carbide brad-point boring tools
A clamping flat, end screw and carbide brad point are described for boring machines.
- Cut diameter range
- 6–12 mm
- Shank
- 10 mm
- Rotation
- Right or left; specify separately
REFERENCE 0307-219
V-point through-boring tools
A welded carbide V-point is described for through-boring board; the shank has a flat and screw.
- Cut diameter range
- 6–12 mm
- Shank
- 10 mm
- Rotation
- Right or left
REFERENCE 0307-220
Hinge-pocket CNC boring tools
A flat-and-screw shank direction serves hinge pockets and blind bores.
- Cut diameter range
- 15–60 mm
- Shank
- 10 mm
- Rotation
- Right or left
REFERENCE 0307-221
Three-flute tapered routing tools
A tapered three-flute direction is listed, but the HSS title and carbide body description conflict. Material selection needs confirmation.
- Diameter ranges
- 2–12; 3–12; 4–12 mm
- Shank reference
- 12 mm; confirm approved drawing
REFERENCE 0307-222
Solid-carbide tapered ball-nose router tools
A tapered ball tip serves multi-axis wood and plastics carving.
- Diameter and shank ranges
- 3.175–6 mm; select paired drawing
REFERENCE 0307-223
Two-flute upcut carbide router tools
Two spiral upcut flutes serve grooves, slots, mortises and pockets in wood panels and plastics.
- Diameter range
- 4–16 mm
- Shank range
- 4–16 mm; confirm matching pair
REFERENCE 0307-224
Compression-spiral carbide bits with chipbreaker
Two compression flutes serve double-faced board, PVC and acrylic routing.
- Diameter range
- 4–12 mm
- Shank range
- 4–12 mm; confirm matching pair
REFERENCE 0307-225
Three-spiral roughing carbide end mills
Three roughing upcut spirals and polished relief are described for hardwood and non-ferrous alloys.
- Diameter range
- 16–22 mm
- Shank
- 16 mm
REFERENCE 0307-226
M42 HSS single-flute upcut mills
A polished single-upcut-flute direction serves aluminium-profile carving and slotting.
- Diameter range
- 3–8 mm
- Shank
- 12.7 mm
REFERENCE 0307-227
Router bits
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Type — verify units and ordered drawing
- Carbide straight bit (single flute); Carbide straight bit (double flutes); Panel pilot bit with drill point; Stagger teeth straight bit; Bottom cleaning bit; Hinge boring bit; 45 degree angle chamfer bit; Straight bit with bearing; Horse nose bit; Glue joint bit; Grooving bit 90 angle; Dovetail bit; Lock miter bit; Corner round bit; Finger nail bit; Classical cove bit; Cove bit with bearing; Mortising bit; Flat ogee bit; Roman ogee bit with bearing; Classical moulding bit; Curved line bit; Classical bit; Drawing line bit; Double roman ogee bit; Wavy edge bit; Special moulding bit; Edge beading bit; Double-Arc round nose bit; Table edge bit; Table ogee bit; Table corner bit; Table curved round bit; Keyhole bit; Traditional bit; Roman classical bit; Roman ogee bit; Undermount bowl bit; Side finger nail type bit; Arch type router bit; Drawer lock bit; Door lip tib; Hinge bit; Open end carving bit; Miter bit; Bevel carving bit; Stamen type classical plunge bit; Carving bit; Marginal classical plunge bit; Flat bottom cutter; Classical ogee plunge bit; Core box bi; Round nose bit
REFERENCE 0307-228
Slot mortise bits
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
19 listed configurations · view dimensions
Dia. | L2 Flute | Oal | shank — verify units and ordered drawing Dia. L2 Flute Oal shank 5 35 105 13x50 6 35 110 13x50 7 35 120 13x50 8 40 125 13x50 9 40 130 13x50 10 45 135 13x50 11 48 140 13x50 12 50 145 13x50 13 53 150 13x50 14 55 155 13x50 15 58 160 13x50 16 60 165 16x50 18 68 175 16x50 20 70 180 16x50 22 75 185 16x50 24 77 190 16x50 26 80 195 20x50 28 50 200 20x50 30 85 210 20x50
REFERENCE 0307-229
Carbon-steel wood shaping and boring tools
Heat-treated high-carbon-steel body and cutting spurs combine shaping and wood-boring functions. Fit and operating instructions must be agreed for the actual machine.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-230
Wood and plastic hole-making assortment
Carbon-steel hole saws, spade bits and HSS Ti-treated saw drills are supplied as a case assortment for wood/panels/plastics, excluding metal. The stated total and listed components require a confirmed bill of materials.
- Hole saws
- 13 pieces, 19–127 mm / 3/4–5 inch
- Spade bits
- 1 inch and 7/8 inch
- Saw-drill sizes
- 1/4 inch and 5/16 inch
- Accessories
- Mandrels, hex keys, installation plate and case; confirm count
REFERENCE 0307-231
Universal hole saw (standard)
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
18 listed configurations · view dimensions
Dia. | cutting depth | teeth No. — verify units and ordered drawing Dia. cutting depth teeth No. 20 60 1 25 60 1 30 60 1 35 60 2 40 60 2 45 60 2 50 60 3 55 60 3 60 60 3 68 60 3 75 60 4 80 60 4 85 60 4 90 60 4 105 60 5 112 60 5 127 60 5 152 60 5 - Dimensions and configurations
18 listed configurations · view dimensions
Dia. | cutting depth | teeth No. — verify units and ordered drawing (alternative schedule 2) Dia. cutting depth teeth No. 20 160 1 25 160 1 30 160 1 35 160 1 40 160 2 45 160 2 50 160 2 55 160 3 60 160 3 68 160 3 75 160 4 80 160 4 85 160 4 90 160 4 105 160 5 112 160 5 127 160 6 152 160 6
REFERENCE 0307-232
Universal hole saw ( Heavy duty)
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
13 listed configurations · view dimensions
Dia. | cutting depth | teeth No. | Thread — verify units and ordered drawing Dia. cutting depth teeth No. Thread 25 60 3 M16 35 60 3 M16 40 60 3 M16 45 60 3 M16 50 60 3 M16 55 60 5 M16 68 60 5 M16 75 60 5 M16 85 60 5 M16 105 60 5 M16 112 60 5 M16 127 60 5 M16 152 60 5 M16
REFERENCE 0307-233
Arbor for universal hole saw
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
2 listed configurations · view dimensions
shank | thread | Drill | Drill height — verify units and ordered drawing shank thread Drill Drill height SDS plus shank M16 8 80mm Hexagon M16 8 80mm
REFERENCE 0307-234
Nested hole saw wood working
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
10 listed configurations · view dimensions
set(pcs) | depth(mm) | size(mm) — verify units and ordered drawing set(pcs) depth(mm) size(mm) 3 22 60-67-74 3 40 40-54-65 4 33 25-35-43-53 5 37 28-35-50-65-75 5 22 60-67-74-81-95 5 40 60-68-75-83-92 6 23 25-32-40-45-54-65 7 25 25-32-38-45-50-56-62 7 50 25-32-38-45-50-56-62 8 35 25-32-38-44-51-57-63-68
REFERENCE 0307-235
Carbon steel pull pressed hole saw
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Construction / finish choices
- standard; ground teeth; confirm availability for each size
- Dia mm — verify units and ordered drawing
- 19; 22; 25; 29; 32; 35; 41; 44; 48; 51; 54; 57; 64; 70; 76; 89; 92; 95; 102; 114; 127; 140; Fixed adj-drill
REFERENCE 0307-236
Arbors for high carbon steel hole saw
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
6 listed configurations · view dimensions
Drill | shank | Fit to hole saw — verify units and ordered drawing Drill shank Fit to hole saw 1/4” 1/4 round 3/4 - 1-1/8 15/64 1/4 round 3/4 - 1-1/8 15/64 3/8 round 1-1/4 - 5-1/2 15/64 3/8 hex 1-1/4 - 5-1/2 1/4 1/4 round 1-1/4 - 5-1/2 1/4 1/4 quick change hex 1-1/4 - 5-1/2
REFERENCE 0307-237
Doweling center
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
3 listed configurations · view dimensions
Dia | Unlabelled dimension — dimensional units and current drawing to confirm Dia Unlabelled dimension — dimensional units and current drawing to confirm 6.0mm for board thickness from 12-14mm 8.0 for board thickness from 15-18mm 10.0 for board thickness from 19-30mm
REFERENCE 0307-238
Extension bar for spade drill
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
4 listed configurations · view dimensions
L1 Oal | L1 Oal — verify units and ordered drawing L1 Oal L1 Oal 150mm 6” 180 7 270 10-1/2 300 12
REFERENCE 0307-239
Depth stop
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dia — dimensional units and current drawing to confirm
- 6.0mm; 8.0; 10.0; 12.0
REFERENCE 0307-240
Jointing biscuits
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
3 listed configurations · view dimensions
size | Qty/bag — verify units and ordered drawing size Qty/bag 0# 50pc 10# 50pc 20# 50pc
REFERENCE 0307-241
Fine-tooth non-carbide circular blades
A fine-tooth direction is described for softwood, plastics and soft non-ferrous materials.
- Diameter / bore / teeth
- 184 / 15.88 mm / 140T; 254 / 15.88 mm / 180T
REFERENCE 0307-242
Multi-material carbide-tipped circular blades
A carbide-tooth direction lists wood and thin iron/aluminium sheet; confirm the actual substrate and machine rating.
- Diameter / bore / teeth
- 190 / 30 mm / 38T
- Metal-thickness reference
- 1–2 mm; application requires confirmation
REFERENCE 0307-243
Metric woodworking carbide-tipped saws
Metric diameter/bore combinations form this woodworking direction; inconsistent inch translations are not used.
- Diameter / bore / teeth
- 165 / 15.88 mm / 24T; 184 / 20 mm / 24T; 254 / 15.88 mm / 40T; 305 / 25.4 mm / 80T
REFERENCE 0307-244
Low-friction-coated woodworking circular saws
A non-stick coating direction is described for wood sawing.
- Diameter mm : teeth
- 115/136/140 : 18/24/36; 150/160 : 18/24/40; 165/215 : 24/40/48/60; 184/200/210 : 24/40/60; 254 : 32/40/60/80; 305/350 : 80/100/120
REFERENCE 0307-245
Large carbide-tipped panel saw blades
The actual geometry is a circular panel-saw blade; confirm the machine instead of relying on the inconsistent reciprocating title.
- Diameter / bore
- 350 / 30 mm
- Tooth options
- 72T or 84T
REFERENCE 0307-246
Single/double scoring blades
A panel-scoring direction includes single and paired rows. No hazardous-area or explosion-protection rating is implied.
- Diameter / bore
- 120 / 20 mm
- Teeth
- 24 single or 12+12 double
REFERENCE 0307-247
Precision panel-saw blades
A fine panel-cutting direction is described for veneered board, MDF and plywood.
- Diameter / bore / teeth
- 300 / 30 mm / 96T
- Panel-thickness application reference
- Below 35 mm
REFERENCE 0307-248
Auto-welded carbide multi-slotting blades
A multi-slotting blade direction uses welded carbide tips. Agree the dimension sequence on the drawing.
- Size reference
- 125 × 3T × 4/2.2 × 22.23 mm
REFERENCE 0307-249
Flax roller discs
A flax-based roller disc direction has a separately stated temperature reference; confirm duty and the approved specification.
- Outer diameter × thickness
- 190 × 6 mm
- Bore
- 60 mm
- Temperature reference
- 120°C; item-specific reference, not general heat suitability
REFERENCE 0307-250
Cotton saw blade
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
2 listed configurations · view dimensions
Blade type | thickness mm | outside diameter mm | bore mm | mass kg Blade type thickness mm outside diameter mm bore mm mass kg 1 0.95 322 100 0.549 2 0.95 322 61.8 0.585 - Type 1 packing
- 25 pieces/carton; 36 × 36 × 6 cm; gross/net 15/14 kg; approve current pack
- Type 2 packing
- 25 pieces/carton; 36 × 36 × 6 cm; gross/net 16/15 kg; approve current pack
REFERENCE 0307-251
Saw blade without carbide teeth
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
2 listed configurations · view dimensions
size | size — verify units and ordered drawing size size 184x16x150T 7-1/4”x5/8”x150T 254x16x200T 10”x5/8”x200T
REFERENCE 0307-252
Half-inch-fitting reciprocating blades
A wood/demolition direction includes plunge and general cutting applications; confirm blade length and teeth together.
- Shank
- 1/2 inch
- Length range
- 152–300 mm
- TPI options
- 3, 5, 6, 10, 12
REFERENCE 0307-253
Carbide/HSS reciprocating-blade directions
Separate dimension/tooth combinations address plasterboard/metal tube, nailed wood and metal cutting. Confirm dimensional units and the actual carbide/HSS construction.
- Plasterboard / tube reference
- 150 × 22 × 1.3 × 6T; 229 × 22 × 1.3 × 6T
- Nailed-wood reference
- 150 × 25 × 1.25 × 6/8T; 225 × 25 × 1.25 × 6/8T
- Metal reference
- 150 × 25 × 1.3 × 8T; 225 × 25 × 1.3 × 8T
REFERENCE 0307-254
M42 bi-metal reciprocating blades
M42 bi-metal and separate length/thickness/width/tooth combinations distinguish this series.
- Dimension × tooth references
- 150 × 1.6 × 22 mm × 6T; 152 × 1.1 × 25.4 mm × 18T; 152 × 1.6 × 25.4 mm × 5T; 228 × 1.6 × 22 mm × 6T; 228 × 1.1 × 25.4 mm × 18T; 228 × 1.6 × 25.4 mm × 5T; 304 × 1.6 × 22 mm × 6T
- Material
- M42 bi-metal
REFERENCE 0307-255
Curved M42 bi-metal metal blades
Curved blades are described for metal cutting, with thickness paired to length.
- Length × thickness × width / teeth
- 200 × 0.96 × 19 mm / 14T or 10/14T; 250 × 1.27 × 19 mm / 14T or 10/14T
REFERENCE 0307-256
Reciprocating saw blades for used pallet
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Size — verify units and ordered drawing
- 200 x 0.9 x 19; 213 x 0.9 x 19; 200 x 1.25 x 19; 225 x 0.9 x 19
REFERENCE 0307-257
Circular chain saw
A circular chain-tooth cutting direction requires a specifically approved machine, guard and mounting arrangement. Submit the machine specification for a compatibility review.
- size — verify units and ordered drawing
- 115x22.2; 125x22.2; 180x22.2; 230x22.2
REFERENCE 0307-258
Jig saw blade
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
21 listed configurations · view dimensions
Oal. | No.teeth | Unlabelled dimension | Unlabelled dimension — verify units and ordered drawing Oal. No.teeth Unlabelled dimension Unlabelled dimension 80 6 milled CRV 80 10 milled CRV 70 18 milled HSS 70 21 milled HSS 70 32 milled HSS 80 10 ground T/B CRV 70 12 milled CRV 70 21 milled CRV 100 8 ground T/B HSS 100 10 ground T/B CRV 100 6 ground T/B CRV 75 21 milled HSS 75 12 milled HSS 75 32 milled HSS 75 24 milled CRV 75 12 milled CRV 100 8 milled HSS 100 6 ground CRV 75 12 milled Bi-metal 100 8 milled Bi-metal 100 8 milled CRV
REFERENCE 0307-259
Reciprocating saw blades with 1/2" shank
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
28 listed configurations · view dimensions
L x width | L x width | Teeth No. | blade shape | blade shape — verify units and ordered drawing L x width L x width Teeth No. blade shape blade shape 4 x 3/4” 100x20mm 6-14T HCS milled 6 x 3/4 150x20 6-14T HCS milled 7 x 3/4 175x20 6-14T HCS milled 8 x 3/4 200x20 6-14T HCS milled 9 x 3/4 230x20 6-14T HCS milled 10 x 3/4 250x20 6-14T HCS milled 12 x 3/4 300x20 6-14T HCS milled 4 x 3/4 100x20 6-14T HCS ground 6 x 3/4 150x20 6-14T HCS ground 7 x 3/4 175x20 6-14T HCS ground 8 x 3/4 200x20 6-14T HCS ground 9 x 3/4 230x20 6-14T HCS ground 10 x 3/4 250x20 6-14T HCS ground 12 x 3/4 300x20 6-14T HCS ground 4 x 3/4 100x20 6-14T HSS Bi-metal 6 x 3/4 150x20 6-14T HSS Bi-metal 7 x 3/4 175x20 6-14T HSS Bi-metal 8 x 3/4 200x20 6-14T HSS Bi-metal 9 x 3/4 230x20 6-14T HSS Bi-metal 10 x 3/4 250x20 6-14T HSS Bi-metal 12 x 3/4 300x20 6-14T HSS Bi-metal 4 x 3/4 100x20 6-14T HSS-E Bi-metal 6 x 3/4 150x20 6-14T HSS-E Bi-metal 7 x 3/4 175x20 6-14T HSS-E Bi-metal 8 x 3/4 200x20 6-14T HSS-E Bi-metal 9 x 3/4 230x20 6-14T HSS-E Bi-metal 10 x 3/4 250x20 6-14T HSS-E Bi-metal 12 x 3/4 300x20 6-14T HSS-E Bi-metal
REFERENCE 0307-260
Wood carving disc
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
15 listed configurations · view dimensions
Dia. | type — verify units and ordered drawing Dia. type 85 Flat 100 Flat 110 Flat 115 Flat 125 Flat 85 Beveled 100 Beveled 110 Beveled 115 Beveled 125 Beveled 85 Arc 100 Arc 110 Arc 115 Arc 125 Arc
REFERENCE 0307-261
Rotary rasp with 1/4” hex shank and power groove
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
3 listed configurations · view dimensions
size | type — verify units and ordered drawing size type 5/8 x 1-1/8 x 1/4” flat end cylinder 5/8 x 1-1/8 x 1/4” round end cylinder 5/8 x 1-1/8 x 1/4” tapered cone retry
REFERENCE 0307-262
Rotary files with 1/4” hex shank and power groove
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
3 listed configurations · view dimensions
size | type — verify units and ordered drawing size type 1/2 x 1 x 1/4” rounded front cylinder 1/2 x 1 x 1/4 square edge cylinder 1/2 x 1 x 1/4 tapered cone retry
REFERENCE 0307-263
Wheel rasp
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
2 listed configurations · view dimensions
Oal. | Oal. — verify units and ordered drawing Oal. Oal. 125mm 5” 150 6”
REFERENCE 0307-264
Roto rasp with 1/4” hex shank
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dia | Oal — verify units and ordered drawing
- 1-1/4” | 2”
REFERENCE 0307-265
Jig rasp
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
2 listed configurations · view dimensions
Oal | Oal — verify units and ordered drawing Oal Oal 75mm 3” 100 4
REFERENCE 0307-266
Wood rasp
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size — verify units and ordered drawing
- 57x254mm 57x150mm
REFERENCE 0307-267
TCT blade grass cutting
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. | Dia. | No.of Teeth — verify units and ordered drawing Dia. Dia. No.of Teeth 230 9” 36 230 9 40 250 10 36 250 10 40 255 10 40
REFERENCE 0307-268
Nylon mowing line
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
9 listed configurations · view dimensions
Dia | Shape — verify units and ordered drawing Dia Shape 1.25mm round 1.6 round 2 round 2.4 round 3 round 3.3 round 2.0x2.0 square 2.4x2.4 square 3.3x3.3 square
REFERENCE 0307-269
Grass trimmer head
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-270
Grass trimmer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
19 listed configurations · view dimensions
Dia. | Inner hole | Thickness | Teeth No. — verify units and ordered drawing Dia. Inner hole Thickness Teeth No. 205 25.4 1.5 2T 205 25.4 1.8 2T 205 25.4 3.0 2T 255 25.4 1.5 2T 255 25.4 1.8 2T 255 25.4 3.0 2T 305 25.4 1.5 2T 305 25.4 1.8 2T 305 25.4 3.0 2T 300 25.4 3.0 2T 255 25.4 3.0 3T 305 25.4 3.0 3T 255 25.4 1.4 3T 230 25.4 1.4 4T 255 25.4 1.4 4T 230 25.4 1.4 8T 255 25.4 1.4 8T 230 25.4 1.4 80T 255 25.4 1.4 80T
REFERENCE 0307-271
Carbide indexable blade
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
9 listed configurations · view dimensions
lengh x width x heigth | material — verify units and ordered drawing lengh x width x heigth material 7.5 x 12 x 1.5 K10 9.6 x 12 x 1.5 K10 14.6 x 12 x 1.5 K10 20 x 12 x 1.5 K10 25 x 12 x 1.5 K10 30 x 12 x 1.5 K10 40 x 12 x 1.5 K10 50 x 12 x 1.5 K10 60 x 12 x 1.5 K10
REFERENCE 0307-272
HSS replacement planer blades
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
8 listed configurations · view dimensions
L x W x H | material — verify units and ordered drawing L x W x H material 56.0 x 5.5 x 1.1 HSS 60.0 x 5.5 x 1.1 HSS 75.5 x 5.5 x 1.1 HSS 78.0 x 5.5 x 1.1 HSS 80.5 x 5.5 x 1.1 HSS 82.0 x 5.5 x 1.1 HSS 92.0 x 5.5 x 1.1 HSS 102.0 x 5.5 x 1.1 HSS
REFERENCE 0307-273
Straight edge moulder blade
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
17 listed configurations · view dimensions
L x W x H | material — verify units and ordered drawing L x W x H material 210 x 30 x 3 HSS 310 x 30 x 3 HSS 410 x 30 x 3 HSS 510 x 30 x 3 HSS 610 x 30 x 3 HSS 820 x 30 x 3 HSS 920 x 30 x 3 HSS 1020 x 30 x 3 HSS 210 x 35 x 3 HSS 310 x 35 x 3 HSS 410 x 35 x 3 HSS 510 x 35 x 3 HSS 610 x 35 x 3 HSS 810 x 35 x 3 HSS 920 x 35 x 3 HSS 1020 x 35 x 3 HSS 319 x 18 x 3 HSS
REFERENCE 0307-274
reversible planer blades
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
32 listed configurations · view dimensions
L x W x H | material — verify units and ordered drawing L x W x H material 30 x 10 x 2.3 HSS 50 x 10 x 2.3 HSS 100 x 10 x 2.3 HSS 150 x 10 x 2.3 HSS 200 x 10 x 2.3 HSS 250 x 10 x 2.3 HSS 300 x 10 x 2.3 HSS 350 x 10 x 2.3 HSS 400 x 10 x 2.3 HSS 450 x 10 x 2.3 HSS 480 x 10 x 2.3 HSS 500 x 10 x 2.3 HSS 520 x 10 x 2.3 HSS 550 x 10 x 2.3 HSS 600 x 10 x 2.3 HSS 650 x 10 x 2.3 HSS 680 x 10 x 2.3 HSS 700 x 10 x 2.3 HSS 720 x 10 x 2.3 HSS 750 x 10 x 2.3 HSS 800 x 10 x 2.3 HSS 850 x 10 x 2.3 HSS 900 x 10 x 2.3 HSS 950 x 10 x 2.3 HSS 1000 x 10 x 2.3 HSS 1200 x 10 x 2.3 HSS 1400 x 10 x 2.3 HSS 1500 x 10 x 2.3 HSS 1600 x 10 x 2.3 HSS 1800 x 10 x 2.3 HSS 1900 x 10 x 2.3 HSS 2000 x 10 x 2.3 HSS
REFERENCE 0307-275
Carbide reversible planer blades
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- L x W x H | material — verify units and ordered drawing
- 82 x 29 x 3 | HM(TCT)
REFERENCE 0307-276
Planer blades
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Construction / finish choices
- TCT; HSS; confirm availability for each size
- size — verify units and ordered drawing
- 75.5x5.5x1.1; 82.7x5.5x1.1; 102x5.5x1.1; 82x5.5x1.1; 80.5x5.9x1.1
REFERENCE 0307-277
Zirconia flat finishing wheels
A zirconia abrasive direction serves metal deburring and polishing.
- Diameters
- 50, 75, 100, 115, 125 mm
REFERENCE 0307-278
Quick-lock zirconia discs
A small-format zirconia direction serves metal finishing.
- Diameters
- 50 or 75 mm
REFERENCE 0307-279
Quick-lock nylon finishing discs
A nylon direction serves metal and composite-material finishing.
- Diameters
- 50 or 75 mm
REFERENCE 0307-280
Aluminium-oxide flap discs
Aluminium oxide is the abrasive for automotive and metal finishing.
- Diameters
- 100, 115, 125, 150, 180 mm
- Grit
- P40–P320
REFERENCE 0307-281
Ceramic/zirconia flap discs
A ceramic and mixed zirconium-oxide direction serves metal and coated surfaces.
- Diameters
- 100, 115, 125, 150, 180 mm
- Grit
- P40, P60, P80, P120
REFERENCE 0307-282
Diamond flap discs
Diamond abrasive distinguishes this flap direction. Confirm diameter/grit pairing; two diameter lists are present.
- Detailed diameter selection
- 115 or 125 mm
- Grit options
- P80, P100, P120, P200, P400
REFERENCE 0307-283
Structured finishing papers
A silicon-carbide/aluminium-oxide direction addresses automotive, instrument and furniture finishing.
- Grain references
- A3, A5, A7, A9; confirm the actual grading system
REFERENCE 0307-284
Perforated sponge-backed abrasive rolls
A perforated roll provides pre-sized sponge-backed pads.
- Roll
- 115 mm × 25 m
- Pad
- 115 × 125 mm
- Quantity
- 200 pads per roll
REFERENCE 0307-285
Mesh-backed sanding discs
Aluminium oxide and mixed ceramic options use a mesh structure.
- Diameters
- 125 or 150 mm
- Grit
- P40–P3000
REFERENCE 0307-286
Sponge sanding discs
A sponge direction serves metal and vehicle finishing; confirm disc versus roll format.
- Diameters
- 125 or 150 mm
- Grit
- P80–P800
REFERENCE 0307-287
Aluminium-oxide film sanding discs
Film backing and aluminium oxide serve wood, metal and automotive finishing.
- Diameters
- 125 or 150 mm
- Grit
- P40–P2000
REFERENCE 0307-288
Microstructured fine sanding sponges
A three-dimensional abrasive structure is described for paint-defect correction and post-paint finishing.
- Diameters
- 125 or 150 mm
- Grit
- P1000–P8000
REFERENCE 0307-289
Thin metal-cutting disc assortment
Aluminium-oxide/corundum abrasive and double glass-fibre reinforcement are described. Match the actual wheel marking and tool speed.
- Pack
- 52 pieces
- Diameter × thickness × bore
- 115 × 1.2 × 22.2 mm
- Stated maximum speed
- 13,300 rpm; verify each supplied wheel marking
REFERENCE 0307-290
T27A depressed grinding discs for metal
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size:mm — verify units and ordered drawing
- 100x4.0x16; 100x6.0x16; 115x4.0x22.2; 115x6.0x22.2; 125x4.0x22.2; 125x6.0x22.2; 150x4.0x22.2; 150x6.0x22.2; 180x4.0x22.2; 180x6.0x22.2; 180x8.0x22.2; 230x6.0x22.2; 230x6.5x22.2; 230x8.0x22.2
REFERENCE 0307-291
T41A cutting discs for metal
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size:mm — verify units and ordered drawing
- 100x2.0x16; 100x2.5x16; 100x3.0x16; 105x1.2x16; 105x2.0x16; 115x2.0x22.2; 115x2.5x22.2; 115x3.0x22.2; 125x2.0x22.2; 125x2.5x22.2; 125x3.0x22.2; 150x2.0x22.2; 150x2.5x22.2; 150x3.0x22.2; 180x2.0x22.2; 180x3.0x22.2; 230x2.0x22.2; 230x3.0x22.2; 255x3.0x25.4; 305x3.0x25.4; 355x3.0x25.4; 400x3.0x25.4; 115x3.2x22.2; 125x3.2x22.2; 180x3.2x22.2; 230x3.2x22.2
REFERENCE 0307-292
T42A depressed cutting discs for metal
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size：mm — verify units and ordered drawing
- 115x3.2x22.2; 125x3.2x22.2; 180x3.2x22.2; 230x3.2x22.2
REFERENCE 0307-293
T27WA depressed grinding discs for inox
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size:mm — verify units and ordered drawing
- 100x6.0x16; 115x6.0x22.2; 125x6.0x22.2; 150x6.0x22.2; 180x6.0x22.2; 180x7.0x22.2; 230x6.0x22.2; 230x7.0x22.2
REFERENCE 0307-294
T41WA cutting discs for inox
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size:mm — verify units and ordered drawing
- 100x1.0x16; 100x1.0x32; 100x1.6x16; 115x0.8x22.2; 115x1.0x22.2; 115x1.2x22.2; 115x1.6x22.2; 125x0.8x22.2; 125x1.0x22.2; 125x1.2x22.2; 125x1.6x22.2; 150x1.0x22.2; 150x1.2x22.2; 150x1.6x22.2; 150x2.5x22.2; 180x1.6x22.2; 180x3.0x22.2; 230x1.9x22.2; 230x3.0x22.2
REFERENCE 0307-295
Rubber backing pad
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia.mm | Thread size — verify units and ordered drawing Dia.mm Thread size 100 M10x1.25/ M10x1.5/ M14x2 115 M10x1.5/ M14x2 125 M14x2/ M16x2 150 M14x2/ M16x2 180 M14x2/ M16x2 - Dimensions and configurations
5 listed configurations · view dimensions
Dia.mm | Thread size — verify units and ordered drawing (alternative schedule 2) Dia.mm Thread size 100 1/4” shank 115 1/4” shank 125 1/4” shank 150 1/4” shank 180 1/4” shank - Dimensions and configurations
3 listed configurations · view dimensions
Dia.mm | Thread size — verify units and ordered drawing (alternative schedule 3) Dia.mm Thread size 80 M14x2 100 M14x2 125 M14x2 - Dimensions and configurations
4 listed configurations · view dimensions
Dia.mm | Thread size — verify units and ordered drawing (alternative schedule 4) Dia.mm Thread size 50 6mm shank. “R” 75 6mm shank. “R” 50 6mm shank. “S” 75 6mm shank. “S”
REFERENCE 0307-296
Plastic backing pad
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
6 listed configurations · view dimensions
Dia.mm | Thread size — verify units and ordered drawing Dia.mm Thread size 80 M10x1.25/ M10x1.5/ M14x2 100 M10x1.25/ M10x1.5/ M14x2 115 M10x1.5/ M14x2 125 M14x2/ M16x2 150 M14x2/ M16x2 180 M14x2/ M16x2 - Dimensions and configurations
2 listed configurations · view dimensions
Dia.mm | Thread size — verify units and ordered drawing (alternative schedule 2) Dia.mm Thread size 115 M14x2 180 M16x2 - Dia.mm | Thread size — verify units and ordered drawing (alternative schedule 3)
- 125 | M14x2
- Dimensions and configurations
5 listed configurations · view dimensions
Dia.mm | Thread size — verify units and ordered drawing (alternative schedule 4) Dia.mm Thread size 100 1/4” shank 115 1/4” shank 125 1/4” shank 150 1/4” shank 180 1/4” shank
REFERENCE 0307-297
Sanding pad
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
4 listed configurations · view dimensions
Dia.mm | Thread size | Thread size | Hole No. — verify units and ordered drawing Dia.mm Thread size Thread size Hole No. 125 5/16”x24 (10mm) 6 125 5/16”x24 (10mm) 8 125 5/16”x24 (16mm) 5 125 5/16”x24 (16mm) 6 - Dimensions and configurations
4 listed configurations · view dimensions
Dia.mm | Thread size | Thread size | Unlabelled dimension — verify units and ordered drawing Dia.mm Thread size Thread size Unlabelled dimension 125 5/16”x24 (10mm) — 150 5/16”x24 (10mm) — 125 5/16”x24 (16mm) — 150 5/16”x24 (16mm) — - Dimensions and configurations
2 listed configurations · view dimensions
Dia.mm | Thread size | Thread size | Hole No. — verify units and ordered drawing (alternative schedule 2) Dia.mm Thread size Thread size Hole No. 125 5/16”x24 (10mm) 5 150 5/16”x24 (10mm) 6 - Dimensions and configurations
3 listed configurations · view dimensions
Dia.mm | Thread size | Unlabelled dimension | Unlabelled dimension — verify units and ordered drawing Dia.mm Thread size Unlabelled dimension Unlabelled dimension 25 5/16”x24 — — 50 5/16”x24 — — 75 5/16”x24 — —
REFERENCE 0307-298
Rubber sanding block
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size — verify units and ordered drawing
- 120x65mm; 165x85mm
REFERENCE 0307-299
Aluminium-oxide angled flap-disc assortment
Resin-bonded aluminium oxide and glass-fibre backing form an angled finishing-disc pack.
- Pack
- 20 pieces: 5 each of grit 40, 60, 80, 120
- Diameter / bore
- 4-1/2 / 7/8 inch
- Shape
- Angled type 29
- Stated maximum speed
- 13,300 rpm; supplied marking governs
REFERENCE 0307-300
Zirconia angled flap-disc assortment
Zirconia on polyester abrasive cloth with a glass-fibre backing distinguishes this stock-removal pack.
- Pack
- 20 pieces: grit 40 × 10; 60 × 5; 80 × 3; 120 × 2
- Diameter / bore
- 4-1/2 / 7/8 inch
- Shape
- Angled type 29
- Working-angle reference
- 15–25°; confirm use instructions
REFERENCE 0307-301
Strip disc
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
6 listed configurations · view dimensions
Dia. | Thick. | Dia. Inner | Max speed rpm — verify units and ordered drawing Dia. Thick. Dia. Inner Max speed rpm 90 15 16 11500 100 15 16/22 11500 115 15 22 11500 125 15 22 10000 150 15 22 8500 180 15 22 6500
REFERENCE 0307-302
Strip disc with shaft
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. | Thickness | Inner hole. | Max speed RPM — verify units and ordered drawing Dia. Thickness Inner hole. Max speed RPM 50 15/30 6 18000 63 15/30 6 18000 75 15/30 6 12000 100 15/30 6 6000 125 15/30 6 4800
REFERENCE 0307-303
Soft TPU-backed sanding sponges
Aluminium oxide, a TPU backing and a soft sponge/film construction are described for curved surfaces.
- Diameters
- 125 or 150 mm
- Grit
- P180–P3000
- Fixing
- Hook-and-loop direction
REFERENCE 0307-304
Film-backed sanding discs
Hook-and-loop film discs include perforated and non-perforated options.
- Diameters
- 100, 115, 125, 150 mm
- Grit
- P40–P2000
- Dust extraction
- With-hole or without-hole options
REFERENCE 0307-305
White hook-and-loop sanding discs
A white abrasive-disc direction serves paint and metal-surface finishing.
- Diameters
- 100, 115, 125, 150 mm
- Grit
- P60–P1200
- Dust extraction
- With-hole or without-hole options
REFERENCE 0307-306
Ceramic sanding discs with spiral holes
Ceramic grain and spiral-arranged extraction holes distinguish this paint/metal finishing direction. Comparative sharpness percentages are not promised.
- Diameters
- 100, 115, 125, 150 mm
- Grit
- P40–P2500
REFERENCE 0307-307
Sanding sponge
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size — dimensional units and current drawing to confirm
- 96x70x25mm; 100x70x25; 120x100x10; 120x90x25; 120x100x25; 125x70x25
REFERENCE 0307-308
Plastic sanding block
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
3 listed configurations · view dimensions
Lengh | Width — verify units and ordered drawing Lengh Width 230 80 230 105 230 120
REFERENCE 0307-309
Nylong end brush with round shank
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 28
REFERENCE 0307-310
Nylong cup brush with round shank
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 52; 64
REFERENCE 0307-311
Nylong wheel brush with round shank
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 75; 100
REFERENCE 0307-312
Nylong end brush with round shank
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 27
REFERENCE 0307-313
Nylong cup brush with round shank
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 63
REFERENCE 0307-314
Knife brush
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
3 listed configurations · view dimensions
Size | Material — verify units and ordered drawing Size Material 140x40 steel 140x40 brass 140x40 stainless steel
REFERENCE 0307-315
Wheel brush for bench grinder crimped wire
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 100; 125; 150; 175; 200; 250; 300
REFERENCE 0307-316
End brush with φ 6 shaft twisted wire
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 25; 30
REFERENCE 0307-317
End brush with φ 6 shaft crimped wire
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 17; 25
REFERENCE 0307-318
Circular brush with hole Ø 32/22mm crimped wire
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 200x32; 250x32; 120x22; 150x22
REFERENCE 0307-319
Bevel brush with M14 nut twisted wire
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 100; 120
REFERENCE 0307-320
Combination sharpening stone with wooden seat
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size — verify units and ordered drawing
- 100×25×12; 150×50×25; 200×50×25
REFERENCE 0307-321
Rectangle type sharpening stone
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
2 listed configurations · view dimensions
size | size — verify units and ordered drawing size size 6”×2”×1” 150×50×25mm 8“×2”×1” 200×50×25mm
REFERENCE 0307-322
Boat type sharpening stone
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size | Unlabelled dimension — verify units and ordered drawing
- 230×13mm | 9×1/2”
REFERENCE 0307-323
Diamond double-faced stone
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size — verify units and ordered drawing
- 4×1×1/4”
REFERENCE 0307-324
Folding diamond stone
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size — verify units and ordered drawing
- 1-1/10×4×3-3/8”
REFERENCE 0307-325
Flat type diamond whetstone
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size — verify units and ordered drawing
- 2”×6”
REFERENCE 0307-326
Multi purpose diamond sharpener
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- size — verify units and ordered drawing
- 140mm
REFERENCE 0307-327
Multi purpose short diamond sharpener
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- size — verify units and ordered drawing
- 100mm
REFERENCE 0307-328
Diamond bench stone
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
2 listed configurations · view dimensions
size | type — verify units and ordered drawing size type 2-1/2×6×3/4 coarse 2-1/2×6×3/4 fine
REFERENCE 0307-329
4 side diamond bench stone
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size — verify units and ordered drawing
- 6×2×2”
REFERENCE 0307-330
Vitrified bond mounted points
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
46 listed configurations · view dimensions
Set | Dia | Length — verify units and ordered drawing Set Dia Length A1 3/4” 3-1/2” A2 1 1-1/4 A3 1 2-3/4 A4 1-1/4 1-1/4 A5 3/4 1-1/8 A6 3/4 1-1/8 A11 13/16 1-3/4 A12 11/16 1-1/4 A13 1-1/8 1-1/8 A14 11/16 7/8 A15 1/4 1-1/16 A21 1 1 A22 3/4 5/8 A23 3/4 1 A24 1/4 3/4 A25 1 — A26 5/8 — A31 1-3/8 1 A32 1 5/8 A33 1 1/2 A34 1-1/2 3/8 A35 1 3/8 A36 1-5/8 3/8 A37 1-1/4 1/4 A38 1 1 A39 3/4 3/4 A40 3/4 — A41 5/8 1-1/4 A42 1-1/4 3/8 B41 5/8 5/8 B42 1/2 3/4 B44 7/32 3/8 B51 7/16 3/4 B52 3/8 3/4 B53 5/16 5/8 B61 3/4 5/16 B62 1/2 3/8 B91 1/2 5/8 B92 1/4 1/4 B101 5/8 11/16 B103 5/8 3/16 B104 5/16 3/8 B111 7/16 11/16 B112 3/8 1/2 B121 1/2 — B122 3/8 —
REFERENCE 0307-331
Grinding wheel
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size — verify units and ordered drawing
- 75×10×10; 75×10×13; 100×12×13; 100×20×16; 100×20×20; 125×15×16; 125×20×20; 150×20×20; 150×20×32; 150×25×32; 175×30×25; 200×20×32; 200×25×32; 200×40×20; 200×40×25; 250×25×32; 250×32×32; 300×32×32; 300×40×32
REFERENCE 0307-332
Three-piece wood-shaping wheel assortment
A toothed/thorn-style shaping direction is intended for non-metal wood work. Confirm machine fit and safe operating instructions; no universal-fit promise.
- Pack
- 3 pieces
- Diameter / bore
- 4 inch / 5/8 inch
REFERENCE 0307-333
Knurled brush
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 85 x 20 x 10
REFERENCE 0307-334
Polishing sponges
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
3 listed configurations · view dimensions
Dia.mm | Thread size — verify units and ordered drawing Dia.mm Thread size 150x50 M14x2/ M16x2 180x50 M14x2/ M16x2 200x50 M14x2/ M16x2
REFERENCE 0307-335
Wool polishing bonnet
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dia.mm — dimensional units and current drawing to confirm
- 50; 75
REFERENCE 0307-336
Felt buffing wheel
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Felt buffing wheel — verify units and ordered drawing
- 78x10mm; 125x15; 150x20; 6”x1/2”; 8”x1/2”
REFERENCE 0307-337
Spiral-stitched calico buffing wheels
Spiral stitching is described for medium scratch removal on metal.
- Dimensions and configurations
5 listed configurations · view dimensions
电机尺寸 | 直径 宽度 | 接杆 — verify units and ordered drawing 电机尺寸 直径 宽度 接杆 1/3 HP 4" 1/2" 1/2"-5/8" 1/3-1/2HP 6" 1/2" 1/2"-5/8" 1/3-3/4HP 8" 1/2" 1/2"-5/8" 1/2---1-1/2HP 10" 1/2" 3/4"-7/8" 1/2-3/4HP 8" 7/8" 1/2"-5/8"
REFERENCE 0307-338
Unstitched poplin buffing sections
An unstitched cloth section is described for light scratch removal and gloss finishing on metal.
- Dimensions and configurations
5 listed configurations · view dimensions
电机尺寸 | 直径 宽度 | 接杆 — verify units and ordered drawing 电机尺寸 直径 宽度 接杆 1/3 HP 4" 1/2" 1/2"-5/8" 1/3-1/2HP 6" 1/2" 1/2"-5/8" 1/3-3/4HP 8" 1/2" 1/2"-5/8" 3/4---1-1/2HP 10" 1/2" 1/2"-5/8" 3/4---1-1/2HP 10" 1/2" 3/4"-7/8"
REFERENCE 0307-339
Plane linen wheel
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
5 listed configurations · view dimensions
电机规格 | 直径 宽度 | 接杆 — verify units and ordered drawing 电机规格 直径 宽度 接杆 1/3 HP 4" 3/8" 1/2"-5/8" 1/3-1/2HP 6" 3/8" 1/2"-5/8" 1/3-3/4HP 8" 3/8" 1/2"-5/8" 3/4---1-1/2HP 10" 3/8" 1/2"-5/8" 3/4-1-1/2HP 10" 3/8" 3/4"-7/8"
REFERENCE 0307-340
Fleece wheel
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
5 listed configurations · view dimensions
电机规格 | 直径 宽度 | 接杆 — verify units and ordered drawing 电机规格 直径 宽度 接杆 1/3 HP 3" 1/2" 1/2"-5/8" 1/3 HP 4" 1/2" 1/2"-5/8" 1/3-1/2HP 6" 1/2" 1/2"-5/8" 1/3-3/4HP 8" 1/2" 1/2"-5/8" 3/4---1-1/2HP 10" 1/2" 3/4"-7/8"
REFERENCE 0307-341
Sanding mop flap flanging
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
2 listed configurations · view dimensions
Dia | Inner hole — verify units and ordered drawing Dia Inner hole 100 22 125 22
REFERENCE 0307-342
Flexi discs
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
2 listed configurations · view dimensions
Dia. | Dia. — verify units and ordered drawing Dia. Dia. 115mm 4-1/2” 125 5
REFERENCE 0307-343
Flap wheels with shank
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
15 listed configurations · view dimensions
size | Grit | Max RPM — verify units and ordered drawing size Grit Max RPM 30x5x3 40-320 25000 30x5x6 40-320 25000 30x10x3 40-320 25000 30x10x6 40-320 25000 30x15x6 40-320 25000 40x10x6 40-320 19100 40x15x6 40-320 19100 40x20x6 40-320 19100 50x10x6 40-320 15300 50x15x6 40-320 15300 50x20x6 40-320 15300 60x15x6 40-320 12700 60x20x6 40-320 12700 60x30x6 40-320 12700 60x40x6 40-320 12700
REFERENCE 0307-344
Diamond flexible polishing discs
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
4 listed configurations · view dimensions
Dia.mm | Bore mm | Thickness mm — verify units and ordered drawing Dia.mm Bore mm Thickness mm 80 16 4 100 16 4 125 16/22.23 4 200 16/22.23 4
REFERENCE 0307-345
Polishing floor pads
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia.mm | Bore mm | Thickness mm — verify units and ordered drawing Dia.mm Bore mm Thickness mm 80 16 4 100 16 4 125 16/22.23 4 150 16/22.23 4 250 16/22.23 4
REFERENCE 0307-346
105° angle extension screwdriver
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size — verify units and ordered drawing
- 130
REFERENCE 0307-347
Angle screwdriver
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size — verify units and ordered drawing
- 110
REFERENCE 0307-348
Universal angle grinder stand
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
2 listed configurations · view dimensions
size(mm) | Type — verify units and ordered drawing size(mm) Type 115/125 Metal base 180/230 Metal base
REFERENCE 0307-349
Universal drill stand
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- size — verify units and ordered drawing
- 43mm
REFERENCE 0307-350
Gardening scissors
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-351
Adjustable spanner
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-352
Adjustable wrenches
A general adjustable-wrench direction; confirm jaw range, material and handle.
- Length range
- 6–12 inch
REFERENCE 0307-353
Quick-grip F clamps
A quick-grip F-clamp direction with several nominal lengths.
- Size options
- 4, 6, 12, 18, 24, 36 inch
REFERENCE 0307-354
Adjustable strap wrenches
An ABS-bodied strap-wrench direction has separate size choices.
- Material
- ABS body
- Weight reference
- 380 g
- Length options
- 150 or 200 mm
REFERENCE 0307-355
Steel measuring tapes
A steel-tape direction for general measuring.
- Measuring range
- 5000 mm
REFERENCE 0307-356
Wire cutter
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-357
Wire strippers
A hand wire-stripping direction; confirm conductor range and blade profile.
- Length
- 160 mm
REFERENCE 0307-358
DIN3126 supper pro screwdriver bits
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dia — dimensional units and current drawing to confirm
- 25; 29; 32; 38; 50; 65; 75; 89; 100; 120; 125; 130; 140; 150; 200; 300; 400; 500
REFERENCE 0307-359
Flexible shaft
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- size — verify units and ordered drawing
- 6x900mm; 13x1300mm
REFERENCE 0307-360
Bits extension adaptor with pipe
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Length — verify units and ordered drawing
- 76mm
REFERENCE 0307-361
Socket adaptor
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
9 listed configurations · view dimensions
size | size — verify units and ordered drawing size size 1/4”Square 25mm 1/4”Square 50mm 1/4”Square 65mm 1/4”Square 75mm 3/8”Square 50mm 3/8”Square 65mm 3/8”Square 75mm 1/2”Square 50mm 1/2”Square 75mm - Dimensions and configurations
3 listed configurations · view dimensions
SDS shank — size | Unlabelled dimension — verify units and ordered drawing SDS shank — size Unlabelled dimension 1/4”x65mm — 3/8”x65mm — 1/2”x75mm —
REFERENCE 0307-362
Magnetic nut setter
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Dimensions and configurations
55 listed configurations · view dimensions
Dia.mm | length(mm) — verify units and ordered drawing Dia.mm length(mm) 4 36 5 36 5.5 36 6 36 7 36 8 36 9 36 10 36 11 36 12 36 13 36 4 42 5 42 5.5 42 6 42 7 42 8 42 9 42 10 42 11 42 12 42 13 42 4 45 5 45 5.5 45 6 45 7 45 8 45 9 45 10 45 11 45 12 45 13 45 4 48 5 48 5.5 48 6 48 7 48 8 48 9 48 10 48 11 48 12 48 13 48 4 65 5 65 5.5 65 6 65 7 65 8 65 9 65 10 65 11 65 12 65 13 65
REFERENCE 0307-363
1/4” DR.Bit fixed socket tool
Select the socket drive, bit profile and length together. Profile identifiers and exact sizes require an approved drawing and sample; no universal interchangeability is implied.
- Dimensions and configurations
4 listed configurations · view dimensions
size(mm) | L(mm) — verify units and ordered drawing size(mm) L(mm) 4 37 5.5 37 6.5 37 7 37
REFERENCE 0307-364
3/8” DR.Bit fixed socket tool
Select the socket drive, bit profile and length together. Profile identifiers and exact sizes require an approved drawing and sample; no universal interchangeability is implied.
- Dimensions and configurations
8 listed configurations · view dimensions
size(mm) | L(mm) — verify units and ordered drawing size(mm) L(mm) 4 48 5.5 48 6.5 48 7 48 4 75 5.5 75 6.5 75 7 75
REFERENCE 0307-365
1/4” DR.solid socked driver
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
7 listed configurations · view dimensions
size(mm) | L(mm) — verify units and ordered drawing size(mm) L(mm) T10 25 T15 25 T20 25 T25 25 T27 25 T30 25 T40 25
REFERENCE 0307-366
DR. socked driver
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
14 listed configurations · view dimensions
1/4” DR.Sae Socket — size | Length | Unlabelled dimension — verify units and ordered drawing 1/4” DR.Sae Socket — size Length Unlabelled dimension 5/32” 20.5/25.0 — 3/16 20.5/25.0 — 7/32 20.5/25.0 — 1/4 20.5/25.0 — 9/32 20.5/25.0 — 5/16 20.5/25.0 — 11/32 20.5/25.0 — 3/8 20.5/25.0 — 13/32 20.5/25.0 — 7/16 20.5/25.0 — 15/32 20.5/25.0 — 1/2 20.5/25.0 — 17/32 20.5/25.0 — 9/16 20.5/25.0 — - Dimensions and configurations
13 listed configurations · view dimensions
1/4” DR.Deep Socket (Metric) — size | Length | Dia.(mm) — verify units and ordered drawing 1/4” DR.Deep Socket (Metric) — size Length Dia.(mm) 4 50 12 4.5 50 12 5 50 12 5.5 50 12 6 50 12 7 50 12 8 50 12 9 50 13 10 50 14 11 50 16 12 50 17 13 50 18 14 50 20 - Dimensions and configurations
11 listed configurations · view dimensions
1/4” DR.Deep Socket (Sae) — size | Length | Dia.(mm) — verify units and ordered drawing 1/4” DR.Deep Socket (Sae) — size Length Dia.(mm) 5/32 50 12 3/16 50 12 7/32 50 12 1/4 50 12 9/32 50 12 5/16 50 12 11/32 50 13 3/8 50 14 7/16 50 16 1/2 50 18 9/16 50 20 - Dimensions and configurations
17 listed configurations · view dimensions
3/8” DR.Deep Socket (Metric) — size | Length | Dia.(mm) — verify units and ordered drawing 3/8” DR.Deep Socket (Metric) — size Length Dia.(mm) 8 63 17 9 63 17 10 63 17 11 63 17 12 63 17 13 63 18 14 63 20 15 63 22 16 63 22 17 63 24 18 63 25 19 63 26 20 63 28 21 63 28 22 63 30 23 63 32 24 63 32 - Dimensions and configurations
10 listed configurations · view dimensions
3/8” DR.Deep Socket (Sae) — size | Length | Dia.(mm) — verify units and ordered drawing 3/8” DR.Deep Socket (Sae) — size Length Dia.(mm) 5/16 63 17 3/8 63 17 7/16 63 17 1/2 63 18 9/16 63 20 5/8 63 22 11/16 63 24 3/4 63 26 7/8 63 30 15/16 63 32 - Dimensions and configurations
22 listed configurations · view dimensions
1/2” DR.Deep Socket (Metric) — size | Length | Dia.(mm) — verify units and ordered drawing 1/2” DR.Deep Socket (Metric) — size Length Dia.(mm) 8 77 22 9 77 22 10 77 22 11 77 22 12 77 22 13 77 22 14 77 22 15 77 22 16 77 22 17 77 24 18 77 26 19 77 26 20 77 28 21 77 28 22 77 30 23 77 32 24 77 32 26 77 36 27 77 36 28 77 38 30 77 40 32 77 42 - Dimensions and configurations
21 listed configurations · view dimensions
1/2” DR.Deep Socket (Sae) — size | Length | Dia.(mm) — verify units and ordered drawing 1/2” DR.Deep Socket (Sae) — size Length Dia.(mm) 5/16 77 22 11/32 77 22 3/8 77 22 7/16 77 22 15/32 77 22 1/2 77 22 9/16 77 22 19/32 77 22 5/8 77 22 21/32 77 24 11/16 77 26 3/4 77 26 25/32 77 28 13/16 77 28 7/8 77 32 15/16 77 32 1 77 34 1-1/16 77 36 1-1/8 77 38 1-3/16 77 40 1-1/4 77 42 - Dimensions and configurations
15 listed configurations · view dimensions
Quarter-inch drive metric socket direction — size | Length | Unlabelled dimension — verify units and ordered drawing Quarter-inch drive metric socket direction — size Length Unlabelled dimension 4 20.5/25.0 — 4.5 20.5/25.0 — 5 20.5/25.0 — 5.5 20.5/25.0 — 6 20.5/25.0 — 6.5 20.5/25.0 — 7 20.5/25.0 — 7.5 20.5/25.0 — 8 20.5/25.0 — 9 20.5/25.0 — 10 20.5/25.0 — 11 20.5/25.0 — 12 20.5/25.0 — 13 20.5/25.0 — 14 20.5/25.0 —
REFERENCE 0307-367
DIN2185 Morse taper sleeves
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
16 listed configurations · view dimensions
MS.No.S | MS.No.T | D | d | L — units and drawing to confirm MS.No.S MS.No.T D d L 1 0 13 9.045 80 2 1 18.6 12.065 92 3 1 24.1 12.065 99 3 2 24.7 17.78 112 4 1 31.6 12.065 124 4 2 31.6 17.78 124 4 3 32.4 23.825 140 5 1 44.7 12.065 156 5 2 44.7 17.78 156 5 3 44.7 23.825 156 5 4 45.5 31.267 171 6 1 63.8 12.065 218 6 2 63.8 17.78 218 6 3 63.8 23.825 218 6 4 63.8 31.267 218 6 5 63.8 44.399 218
REFERENCE 0307-368
277 Morse taper sleeves
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
5 listed configurations · view dimensions
MS.No.S | MS.No.T | L | L1 | D | d | L2 | L3 — verify units and ordered drawing MS.No.S MS.No.T L L1 D d L2 L3 3 1 99 94 23.825 12.065 13.5 19 3 2 112 94 23.825 17.78 5.5 22 4 1 124 117.5 31.267 12.065 12.5 19 4 2 124 117.5 31.267 17.78 16 22 4 3 129.5 117.5 31.267 23.825 24 36
REFERENCE 0307-369
three jaw lathe chuck
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size — verify units and ordered drawing
- 80x16; 100x20; 125x32; 160x42; 200x55; 250x76
REFERENCE 0307-370
four jaw lathe chuck
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size — verify units and ordered drawing
- 80*22; 100*25; 125*30; 160*55; 200*70; 250*100
REFERENCE 0307-371
Dead center
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
7 listed configurations · view dimensions
MS.No.S | D | L — units and drawing to confirm MS.No.S D L MS1 12.065 80 MS2 17.78 100 MS3 23.825 125 MS4 31.267 160 MS5 44.399 200 MS6 63.348 270 MS7 83.061 360
REFERENCE 0307-372
Half-Notched center
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
7 listed configurations · view dimensions
MS.No.S | D | h | L — units and drawing to confirm MS.No.S D h L MS1 12.065 7.6 80 MS2 17.78 11 100 MS3 23.825 15.05 100 MS4 31.267 20.8 160 MS5 44.399 29.35 200 MS6 63.348 41.9 270 MS7 83.061 53.78 360
REFERENCE 0307-373
Carbide Half-Notched center
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
7 listed configurations · view dimensions
MS.No. | h1 | h | D | L — units and drawing to confirm MS.No. h1 h D L MS1 1.5 5.5 12.065 80 MS2 2 6 17.78 100 MS3 3 9 23.825 125 MS4 5 12.5 31.267 160 MS5 7 16 44.399 200 MS6 10 22 63.348 270 MS7 12 24 83.061 360
REFERENCE 0307-374
Carbide center
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
7 listed configurations · view dimensions
MS.No. | D | L | d | d1 — units and drawing to confirm MS.No. D L d d1 MS1 12.065 80 12.2 8 MS2 17.78 100 18 8 MS3 23.825 125 24.1 12 MS4 31.267 160 31.6 15 MS5 44.399 200 44.7 18 MS6 63.348 270 63.8 24 MS7 83.061 360 83.555 24
REFERENCE 0307-375
Bull nose center
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
11 listed configurations · view dimensions
MS.No. | L | L1 | D | D1 | d | θ — verify units and ordered drawing MS.No. L L1 D D1 d θ MS2 132 64 60 17.78 20 60° MS2 135 64 61.9 17.78 12.7 70 MS3 152 81 76.2 23.825 19 70 MS3 170 81 100 23.825 30 60 MS3 164 81 100 23.825 32 75 MS4 232 102.5 160 31.267 40 60 MS4 225 102.5 160 31.267 35 75 MS5 252 129.5 200 44.399 40 75 MS5 281 129.5 250 44.399 57 75 MS6 320 182 200 63.348 40 75 MS6 355 182 250 63.348 57 75
REFERENCE 0307-376
Precision live center
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
5 listed configurations · view dimensions
MS.No. | L | D | L1 | d | D1 — units and drawing to confirm MS.No. L D L1 d D1 MS1 124 36 27 15 12.065 MS2 139 45 34 20 17.78 MS3 176.5 60 47 25 23.825 MS4 217 70 53 32 31.267 MS5 273 90 65 40 44.399
REFERENCE 0307-377
Precision linght-duty live center
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
7 listed configurations · view dimensions
MS.No. | L | D | L1 | d | D1 — units and drawing to confirm MS.No. L D L1 d D1 MS1 115 34 20.3 18 12.065 MS2 129.6 45 28.6 25 17.78 MS3 161.7 52 32.5 28 23.825 MS4 191.7 60 36.5 32 31.267 MS5 244.5 80 50.8 45 44.399 MS6 350.5 130 74.8 75 63.348 MS7 423.5 130 74.8 75 83.061
REFERENCE 0307-378
Precision live center
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
8 listed configurations · view dimensions
MS.No. | L | D | L1 | d | D1 — units and drawing to confirm MS.No. L D L1 d D1 MS1 114 36 17 15 12.065 MS2 129 45 24 20 17.78 MS3 151.5 50 27.5 22 23.825 MS3 160.5 60 31 25 23.825 MS4 205 70 41 32 31.267 MS5 258.5 90 50.5 40 44.399 MS6 334 105 57.5 50 63.348 MS6 378 140 67 60 63.348
REFERENCE 0307-379
Medium-duty live center
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
12 listed configurations · view dimensions
MS.No. | L | L1 | D | D1 | d — units and drawing to confirm MS.No. L L1 D D1 d MS1 115 20 34 12.065 18 MS2 145 26 45 17.78 25 MS3 170 30 52 23.825 28 MS4 205.7 34.7 60 31.267 32 MS5 254 45 77 44.399 45 MS6 362 68.5 125 63.348 75 MS1 125 30 34 12.065 18 MS2 155 36 45 17.78 25 MS3 183 43 52 23.825 28 MS4 222 51 60 31.267 32 MS5 272 63 77 44.399 45 MS6 382 88.5 125 63.348 75
REFERENCE 0307-380
Carbide Medium-duty live center
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
5 listed configurations · view dimensions
MS.No. | L | L1 | d | D | D1 | d1 — units and drawing to confirm MS.No. L L1 d D D1 d1 MS2 145 26 25 45 17.78 12 MS3 170 30 28 52 23.825 15 MS4 205.7 34.7 32 60 31.267 18 MS5 254 45 45 77 44.399 24 MS6 362 68.5 75 125 63.348 40
REFERENCE 0307-381
Medium-duty Multi-purpose live center
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
5 listed configurations · view dimensions
Interface and accessory geometry — MS.No. | D1 | L1 | A D2 | A L2 | B D2 | B L2 | C D2 | C L2 | D D2 | D L2 | E D2 | E D3 | E L2 | F D2 | F L2 | F d | G D2 | G L2 | G d; units to confirm Interface and accessory geometry — MS.No. D1 L1 A D2 A L2 B D2 B L2 C D2 C L2 D D2 D L2 E D2 E D3 E L2 F D2 F L2 F d G D2 G L2 G d MS2 10 20 16 39 16 35.5 16 33 16 46 25 10 40 16 36 10 20 39 16 MS3 12 24 20 48 20 43.5 20 40.5 18 56 35 15 50 22 42 18 35 48 30 MS4 15 30 28 61.5 28 55.5 28 51.5 26 73 55 30 61.5 40 55 35 55 60 48 MS5 20 40 36 80 36 72.45 36 66.8 36 101 70 41 78 60 81 50 70 85 61 MS6 30 55 55 117 55 113 55 108 50 138 90 50 107.5 75 110 60 90 116 75
REFERENCE 0307-382
Light duty thread drill chuck
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
13 listed configurations · view dimensions
Range（mm） | Thread — verify units and ordered drawing Range（mm） Thread 0.6-6.5 3/8-24 UNF 1.5-10 3/8-24 UNF 1.5-10 1/2-20 UNF 1.5-10 M10x1.0 1.5-10 M10x1.25 1.5-10 M12x1.25 1.5-13 3/8-24 UNF 1.5-13 1/2-20 UNF 1.5-13 M12x1.0 1.5-13 M12x1.25 1.5-13 M14x1.0 3-16 3/8-24 UNF 3-16 M12x1.25
REFERENCE 0307-383
Chuck key
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- size — dimensional units and current drawing to confirm
- 6; 10; 13; 16; 19; 20
REFERENCE 0307-384
Heavy duty keyless morse & JT drill chuck
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
14 listed configurations · view dimensions
Range | Female Taper — verify units and ordered drawing Range Female Taper 0.3-4mm JT0 1/64-5/32” JT0 0.5-6mm B10 1/64-1/4” JT1 0.5-8mm B12 1/64-5/16” JT2 1-10mm B12 1/32-3/8” JT2 1-13mm B16 1/32-1/2” JT33 1-16mm B18 1/32-5/8” JT6 5-20mm B22 3/16-3/4” JT3
REFERENCE 0307-385
Key type light duty morse & JT drill chuck
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
10 listed configurations · view dimensions
Range | Female Taper — verify units and ordered drawing Range Female Taper 0.6-6mm B10 1/16-1/4” JT1 1.5-10mm B12 1/16-3/8” JT2 1.5-13mm B16 1/16-1/2” JT33 3-16mm B16 3-16mm B18 1/8-5/8” B16 1/8-5/8” B18
REFERENCE 0307-386
Keyless hand drill chuck thread
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
9 listed configurations · view dimensions
Range(mm) | Mounting thread — verify units and ordered drawing Range(mm) Mounting thread 0.8-10 3/8-24 UNF 0.8-10 1/2-20 UNF 0.8-10 M10x1.0 0.8-10 M10x1.25 0.8-10 M12x1.25 2.0-13 3/8x24 UNF 2.0-13 1/2x20 UNF 2.0-13 M12x1.0 2.0-13 M12x1.25
REFERENCE 0307-387
Heavy duty keyless thread drill chuck
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
9 listed configurations · view dimensions
Range | Female | Thread — verify units and ordered drawing Range Female Thread 0.5-6mm M10x1 3/8”-24 UNF 1/64-1/4” M10x1 3/8”-24 UNF 0.5-8mm M10x1 3/8”-24 UNF 1/64-5/16” M12x1.25 1/2”-20 UNF 1-10mm M10x1 3/8”-24 UNF 1/32-3/8” M12x1.25 1/2”-20 UNF 1-13mm M12x1.25 1/2”-20 UNF 1/32-1/2” M12x1.25 1/2”-20 UNF 1-16mm M12x1.25 1/2”-20 UNF
REFERENCE 0307-388
Right angle drill attachment with handle & key
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Unlabelled dimension | Unlabelled dimension — verify units and ordered drawing
- 1/16”-3/8” CAP | 1.5mm-10mm
REFERENCE 0307-389
Side-cutting pliers
A hand side-cutting direction; confirm wire material and cut rating.
- Length
- 160 mm
REFERENCE 0307-390
Long-nose pliers
A long-nose holding direction; confirm jaw geometry and finish.
- Length
- 160 mm
REFERENCE 0307-391
Three-tool spiral tube-and-sheet drill set
TiN HSS, spiral flutes and a curved groove form this sheet-drilling assortment.
- Set
- 3 pieces
- Size references
- 3–14; 5–20; 16–30.5 × 76 mm
- Sheet-thickness application reference
- Up to 3.0 mm; confirm work material
REFERENCE 0307-392
Mixed-material drill assortment with stops
Three groups contain HSS twist drills, brad-point wood drills and YG8 carbide-tipped masonry drills. This direction excludes hard-steel drilling.
- Component groups
- 78 HSS twist drills; 26 wood drills; 26 masonry drills
- Accessories
- 3 depth stops: 6, 8, 10 mm; hex key
- Pack reference
- 134 pieces, subject to confirmed bill of materials
REFERENCE 0307-393
Multi-material carbide-tip drill assortment
Ground carbide tips and a quick-change fitting are described; choose rotary/impact use for the actual substrate.
- Set / sizes
- 7 pieces: 4, 5, 6, 6, 8, 10, 12 mm
- Shank
- 6.35 mm quick-change hex
REFERENCE 0307-394
Black-and-gold jobber drill assortment
Fully ground HSS, oxide finish and a split point form this metal-drill assortment in a storage case.
- Set
- 29 pieces
- Sizes
- 1/16–1/2 inch in 1/64 inch increments
- Point angle
- 135°
REFERENCE 0307-395
M2 annular-cutter assortment
M2 HSS annular cutters use a two-flat fitting and come with a pilot, hex key and carbide marking pen.
- Cutters
- 1/2, 9/16, 11/16, 13/16, 15/16, 1-1/16 inch
- Cut depth
- 1 inch
- Shank
- 3/4 inch Weldon
- Pack
- 9 pieces including 6 cutters and 3 accessories
REFERENCE 0307-396
Four-flute wood-auger assortment
Hardened/tempered carbon steel, a screw point and four flutes form this wood-drilling assortment. Retail return claims are not included.
- Pack
- 5 pieces
- Sizes
- 1/2, 5/8, 3/4 × 2, 1 inch
- Length
- 6.5 inch
- Shank
- 1/4 inch quick-change hex
REFERENCE 0307-397
Small cut-off wheel and mandrel assortment
Small cut-off wheels and mandrels form a rotary-tool assortment. Confirm the wheel construction, mandrel fit and marked operating limit.
- Pack reference
- 27 wheels; confirm mandrel/accessory count separately
- Wheel diameter × thickness × bore
- 3 × 1/16 × 3/8 inch
- Mandrel thickness range
- 0.035–1/4 inch
- Stated maximum speed
- 25,000 rpm; verify supplied wheel marking
REFERENCE 0307-398
Depressed-centre metal grinding wheel pack
A resin-bonded alumina/silicon-carbide direction uses three glass-fibre reinforcement layers. Verify substrate and safe wheel marking.
- Pack
- 14 pieces
- Diameter × thickness × bore
- 4-1/2 × 1/4 × 7/8 inch
- Stated maximum speed
- 13,300 rpm; supplied marking governs
REFERENCE 0307-399
Hex-shank Forstner assortment
Cutting spurs and a hex shank form a flat-bottom hole-making assortment for wood and wood-based panels.
- Pack
- 16 pieces
- Diameters
- 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8, 2, 2-1/8 inch
- Shank
- 3/8 inch hex
REFERENCE 0307-400
Long wood-auger assortment with pencils
A lead screw draws the bit into wood; the assortment includes a wood case and two carpenter pencils.
- Pack
- 8 pieces: 6 bits and 2 pencils
- Bit diameters
- 1/2, 5/8, 3/4, 7/8, 1, 1-1/4 inch
- Bit length
- 9 inch
- Pencil length
- 7 inch
REFERENCE 0307-401
16pcs Bi-metal hole saw
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 19,20,22,25,29,35,38,40,48,60,65,68,86mm 2pcs adaptor, 1pc extension 300mm
- Type — verify units and ordered drawing
- alu case
REFERENCE 0307-402
Five-blade reciprocating assortment
A five-blade direction is described for wood, branches, plastic and drywall. Verify machine fitting; no universal compatibility claim.
- Pack
- 5 pieces
REFERENCE 0307-403
13pcs Bi-metal hole saw
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 19, 22, 29, 35, 38, 44, 51, 57, 64mm, 2pcs arbors, 1pc adapter, 1pc pilot drill
- Type — verify units and ordered drawing
- alu case; BMC
- Type — verify units and ordered drawing (alternative schedule 2)
- alu case
REFERENCE 0307-404
Multi-size metric thread-repair assortment
HSS taps and drills, stainless wire inserts and installation tools form a metric repair assortment. Approve the complete component bill and thread pairing for the selected pack.
- Thread references
- M5 × 0.8; M6 × 1; M8 × 1.25; M10 × 1.5; M12 × 1.75
- Materials
- HSS cutting tools and stainless wire inserts; confirm exact grade
REFERENCE 0307-405
Thread repair kits assortment
Coordinate the listed components and case layout for the selected assortment. Final component quantities and total pack count require an approved bill of materials.
- Size options
- 4pc thread insert M8-M12 6pc tap M8-M14 2pc insert drive M8-M10 3pc tap guide pin Ø8-Ø12 1pc insert guide rod 1pc knurled head
- Type — verify units and ordered drawing
- plastic box
REFERENCE 0307-406
7pcs combined tap drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- M3,M4,M5,M6,M8,M10 1pc magnetic bits holder
- Type — verify units and ordered drawing
- metal case; Alu case
REFERENCE 0307-407
110pcs tap and die
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 35pc dies M2-M18 35pc taps M2-M18 35pc plug taps M2-M18 2pc tap wrench 1pc T type handle wrench 1pc die handle 1” O/D 1pc die handle 1-1/2” O/D
- Type — verify units and ordered drawing
- BMC
REFERENCE 0307-408
32pcs tap and die
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 7pc dies M3-M12 21pc taps M3-M12 1pc screwdriver 1pc adjustable tap wrench 1pc die stock handle wrench 1pc screw pitch gauge
- Type — verify units and ordered drawing
- metal box
REFERENCE 0307-409
Metric tap-and-die assortment
Metric taps and dies with a die handle and tap wrench form this threading assortment. Select each thread and pitch against a confirmed bill of materials.
- Thread selection
- M3–M10; select the pitch for each tool from an approved bill of materials.
- Type — verify units and ordered drawing
- metal box
REFERENCE 0307-410
11pcs diamond core bit
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 38-52-65-117-127 x 150mm Hex extension SDS extension Hex adaptor SDS adaptor Taper pilot drill Drill key
- Size — verify units and ordered drawing
- 11pc
REFERENCE 0307-411
5pcs laser welding diamond core bit
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 38x150mm 52x150mm 65x150mm 117x150mm 127x150mm
- Size — verify units and ordered drawing
- 5pc
REFERENCE 0307-412
5pcs diamond core bit
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 38x150mm 52x150mm 65x150mm 117x150mm 127x150mm
- Size — verify units and ordered drawing
- Alu case
REFERENCE 0307-413
4pcs diamond core bit
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 38x150mm 65x150mm 127x150mm 1pc diamond disc segmented 300mm
- Size — verify units and ordered drawing
- BMC
REFERENCE 0307-414
3pcs diamond core bit
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 28x300mm 52x150mm 117x150mm
- Size — verify units and ordered drawing
- Alu case
REFERENCE 0307-415
10pcs diamond disc
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size — verify units and ordered drawing
- 115mm 10pc; 125mm 10pc
REFERENCE 0307-416
10pcs diamond disc
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size — verify units and ordered drawing
- 115mm 10pc
REFERENCE 0307-417
5pcs diamond disc
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size — verify units and ordered drawing
- 115mm 5pc
REFERENCE 0307-418
3pcs diamond disc
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size — verify units and ordered drawing
- 110mm 3pc; 115mm 3pc; 125mm 3pc
REFERENCE 0307-419
5pcs diamond vacuum brazed hole saw
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 20,35,40,45,68mm
- Size — verify units and ordered drawing
- Alu case
REFERENCE 0307-420
4pcs diamond vacuum brazed hole saw
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 5,6,8,10mm
- Size — verify units and ordered drawing
- plastic case
REFERENCE 0307-421
Adjustable wood countersink assortment
Replaceable M2 tapered drills, four-flute carbon-steel countersinks and two depth screws form this direction. S2 driver bits are also listed.
- Pilot sizes
- 7/64, 9/64, 11/64, 3/16, 7/32 inch
- Countersink angle
- 82°
- Counterbore sizes
- 3/8 and 1/2 inch
- Shank
- 1/4 inch quick-change hex
- Driver lengths
- 1 and 2 inch
REFERENCE 0307-422
2pcs reciprocating saw blade
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 6"X1.2X6T HCS
- Size — verify units and ordered drawing
- blister
REFERENCE 0307-423
10pcs jig saw blade
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size — verify units and ordered drawing
- T-shank
REFERENCE 0307-424
5pcs jig saw blade
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 100X1.3X10T HCS
- Size — verify units and ordered drawing
- T-shank
REFERENCE 0307-425
5pcs jig saw blade
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 100X1.0X8T HSS
- Size — verify units and ordered drawing
- T-shank
REFERENCE 0307-426
2pcs jig saw blade
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 100X1.3X10T HCS
- Size — verify units and ordered drawing
- T-shank
REFERENCE 0307-427
Multi-profile router assortment
The assortment combines straight, V-groove, dovetail, cove, flush-trim, slotting, chamfer and edge-profiling cutters. Confirm the complete pack count and shanks.
- Straight cutter diameters
- 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 inch
- 90° V grooves
- 3/8, 1/2 inch
- Dovetails
- 1/2, 9/16 inch
- Core boxes
- R1/8, R3/16, R1/4 inch
- Pilot
- 1/4 inch
- Bearing flush-trim diameter × length
- 3/8 × 1/2; 3/8 × 1; 1/2 × 1/2; 1/2 × 1; 3/4 × 1 inch
- Slotting diameters
- 1/4, 5/16, 3/8, 1/2 inch
- 45° chamfers
- 3/8, 1/2, 5/8, 3/4 inch
- Beading / round-over radii
- R1/4, R3/8, R1/2 inch
- Roman ogee radii
- R5/32, R7/32, R9/32 inch
- Ogee-panel radii
- R1/4, R3/8 inch
- Ogee-flute / wavy-edge radius
- R3/16 inch
- Classical cove radius
- R5/16 inch
- Classical radii
- R3/16, R1/4 inch
- Size — verify units and ordered drawing
- alu case
REFERENCE 0307-428
Router bits assortment
Coordinate the listed components and case layout for the selected assortment. Final component quantities and total pack count require an approved bill of materials.
- Size options
- core box 1/2" cove 7/8" dove tail 1/2" Chamfer 1-3/16" Flush trim 1/2" Straight 1/4", 1/2", 5/8" Round over 7/8", 1-1/4" V-groove 1/2" Roman ogee 1-1/16" 1pc diamond file
- Size — verify units and ordered drawing
- wood case
REFERENCE 0307-429
3pcs diamond sharpener
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- type — verify units and ordered drawing
- 3pcs
REFERENCE 0307-430
5pcs diamond files
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 120# grit 6" /8" /10" /12"
- type — verify units and ordered drawing
- 5pcs
REFERENCE 0307-431
Polished accessories tool set assortment
Coordinate the listed components and case layout for the selected assortment. Final component quantities and total pack count require an approved bill of materials.
- type — verify units and ordered drawing
- plastic case
- Dimensions and configurations
27 listed configurations · view dimensions
1PC spanner | 3/8" — verify units and ordered drawing 1PC spanner 3/8" 8PC small sand sleeve 1/4"x1/2" 8PC big sand sleeve 1/2"x1/2" 1PC ruber wheel 1/8"x1" 1PC wool bonnet 1/4"x1" 4PC wool bonnet 1/4"x2/1" 6PC alu oxide discs 1/8"x13/16" 6PC silicon carbide disc 1/8"x13/16" 2PC cutting discs 1/20"x1-1/4" 1PC flap wheel 3/8"x1-1/4" 1PC bullet wool grinding 3/8"x3/4" 3PC mini chuck — 2PC silicon carbide wheel shank:1/8" 3PC alu.oxide wheel shank:1/8" 1PC small drum sandar 1/4"x1/2" 1PC big drum sandar 1/2"x1/2" 2PC chuck shank:1/8" 1PC arbor shank:1/8" 5PC diamond mounted shank:1/8" 1PC end mill shank:1/8" 2PC brush plate/pen 3PC steel brush cup/pen/plate 1PC copper brushes cup 1PC grinding paster — 30PC cutting discs 1/32"x15/16" 36PC thin cutting discs 1/64"x15/16" 60PC sand paper 180#,240#,320# each 20pcs 1PC stone 1"x3/8"x3/8"
REFERENCE 0307-432
4pcs multifunction saw blade
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Type — verify units and ordered drawing
- multi function
REFERENCE 0307-433
23pcs right angle drill&bits set
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 3-Right Angle Drill Attachment With Handle & Key 7-Brad Point Drill Bits 4-5-6-7-8-9-10mm - 10mm keyed chuck 6-Titanium Saw Drills: 3 4 5 6 6.5 8mm 3-Drill depth stop 3-5-8mm 1-Allen Key: 2.5mm 3-Counter Sinker: 13 16 19mm
- type — verify units and ordered drawing
- BMC
REFERENCE 0307-434
Large drill, driver and hardware assortment
HSS, wood and masonry drills combine with driver bits, depth stops, hole saws, dowels and screws. Confirm a signed bill of materials for this multi-component pack.
- HSS drill sizes
- 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6, 6.5, 8 mm
- Wood drills
- 3, 3, 4, 5, 5, 6, 6, 8 mm
- Masonry drills
- 3, 3, 4, 5, 5, 6, 6, 8, 10 mm
- 50 mm drivers
- Slotted 4/5; Phillips 1/2/3; cross-drive 1/2/3
- 25 mm drivers
- Slotted 3/4/5/6; Phillips and cross-drive 0/1/2/3; star 10/15/20/25/30; hex 3/4/5/6; square 0/1/2/3, mixed quantities
- Spade / depth stops
- 22 mm spade; 5, 6, 8, 10 mm stops
- Hole saws
- 32, 38, 44, 54 mm
- Other components
- Hole-saw arbor, hex key, countersink, magnetic holder and 180 dowels/screws; confirm quantities
- type — verify units and ordered drawing
- plastic case
REFERENCE 0307-435
Mixed drill and driving assortment with long bits
Long and standard wood/masonry drills combine with coated/black HSS drills, sockets, drivers and depth accessories. Confirm total and component counts.
- Flat wood bits
- 300 mm long: 8, 10, 12, 14 mm; 150 mm long: 10, 12, 16, 20, 22, 32 mm
- Wood drills
- 4, 4, 5, 6, 7, 8, 9, 10 mm
- Long masonry
- 300 mm long: 8, 10, 12 mm
- Standard masonry
- 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10 mm
- Nut drivers
- 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm
- Stops
- 3, 5, 8 mm
- Driver quantities
- 27 × 25 mm; 20 × 50 mm
- Ti-treated HSS sizes
- 1, 1.5, 2, 2.5, 3.2, 3.5, 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8 mm; mixed quantities
- Black-finish HSS sizes
- 1, 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 9, 10 mm; mixed quantities
- Other components
- Hole saws/arbor, countersink, magnetic extension, cupped nail punches, hex key, steel gauge and hex drills
- type — verify units and ordered drawing
- BMC
REFERENCE 0307-436
Large coated-drill and driver assortment
Ti-treated HSS, wood, masonry and flat bits combine with sanding drums, hole saws and mixed driver profiles. Confirm quantities and valid substitutions.
- Ti-treated HSS sizes
- 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 10, 11, 13 mm; mixed quantities
- Masonry
- 3, 4, 5, 6, 7, 8, 9, 10 mm
- Wood
- 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10 mm
- Flat wood
- 10, 12, 16, 18, 20, 25 mm
- Hex HSS drills
- 1.5, 2, 3, 4 mm
- Sanding drums
- 13, 19, 25, 25 mm
- Hole saws
- 32, 38, 44, 54 mm
- 25 mm driver profiles
- Slotted 3/4/5/5.5/6/7; Phillips and cross-drive 0/1/2/3; star 6/7/8/9/10/15/20/25/27/30/35/40; hex 1.5/2/2.5/3/3.5/4/4.5/5/6; square 1/2/3
- Accessories
- 60 mm magnetic holder, saw adapter, 3 stops and countersink
- type — verify units and ordered drawing
- BMC
REFERENCE 0307-437
81pcs comb. drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 10pc HSS drill TiN : 2, 2, 3, 3, 4, 4, 4.5, 5, 5.5, 6mm 5pc wood drill:4,5,6,8,10mm 5pc masonry drill: 4,5,6,8,10mm 40pc 25mm bits, 10pc 50mm bits 1pc bit holder 9pc nut driver: 5, 6, 7, 8, 9, 10, 11, 12, 13mm 1pc countersink
- type — verify units and ordered drawing
- BMC
REFERENCE 0307-438
Comb. drill assortment
Coordinate the listed components and case layout for the selected assortment. Final component quantities and total pack count require an approved bill of materials.
- Size options
- 11pc HSS drill: 1.0- 6.0 4pc masonry drill: 4.0 -8.0 5pc wood drill: 3.0- 8.0 6pc socket : 4.0- 10.0 32pc bits 25mm; 12pc bits 50mm; 2pc flat wood bit 16,22; 1pc magnetic bit holder; 1pc countersink; 1pc guage.
- type — verify units and ordered drawing
- BMC
REFERENCE 0307-439
49pcs comb. drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 9pc HSS drill TiN: 2,2,3,3,4,5,6,8,10mm 5pc wood drill: 4,5,6,8,10mm 5pc masonry drill: 4,5,6,8,10mm 4pc spade drill: 10,13,16,19mm 4pc carbon hole saw: 32,38,45,54mm 1pc hole saw arbor 20pc bits 1pc bit holder
- type — verify units and ordered drawing
- BMC
REFERENCE 0307-440
41pcs comb. drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 4pc masonry drill, 11pc HSS drill, 4pc wood drill, 16pc bits, 4pc nut setter, 1pc countersink, 1pc bit holder.
- type — verify units and ordered drawing
- plastic case
REFERENCE 0307-441
25pcs comb. drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- HSS drill hex shank: 4-5-6 mm 25mm: PZ1-2,PH1-2,SL4-5 50mm:PH2-T10-15-20-25-27-30-40 75mm:PH2-PZ2, Aaptor 1/4*50,3/8*50 Nut setter 48mm:6-8-10mm 1/4"x 60mm bit holder
- type — verify units and ordered drawing
- plastic case
REFERENCE 0307-442
Multi-material vacuum-brazed cutting discs
A brazed abrasive direction has paired diameter/thickness/bore references. Confirm units and substrate.
- Size references
- 105/115/125/180/230 × 5 × 22.23; confirm units and drawing
REFERENCE 0307-443
diamond disc granite, concrete and asphalt
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
14 listed configurations · view dimensions
Dia. | Hole | T/T | T/H — verify units and ordered drawing Dia. Hole T/T T/H 105 20 2.2 10 115 22.23 2.2 10 125 22.23 2.4 10 150 22.23 2.4 10 180 22.23 2.4 10 200 22.23 2.4 10 230 22.23 2.5 10 250 25.4 2.5 10 300 25.4 3.2 10 350 25.4 3.2 10 400 25.4 3.4 10 450 25.4 3.6 10 500 25.4 3.8 10 600 25.4 4.4 10
REFERENCE 0307-444
Tuck point double diamond blade
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Size options
- 125*22.23*22*7T 125*22.23*25*7T 125*22.23*28*7T 150*22.23*22*7T 150*22.23*25*7T 150*22.23*28*7T 180*22.23*22*7T 180*22.23*25*7T 180*22.23*28*7T
REFERENCE 0307-445
ANSI B94.11 M HSS letter stub drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- fully ground; Co.M35; confirm availability for each size
- Dimensions and configurations
26 listed configurations · view dimensions
Dia. | L1 Oal | L2 Flute — verify units and ordered drawing Dia. L1 Oal L2 Flute A 2-7/16 1-5/16 B 2-1/2 1-3/8 C 2-1/2 1-3/8 D 2-1/2 1-3/8 E 2-1/2 1-3/8 F 2-5/8 1-7/16 G 2-5/8 1-7/16 H 2-11/16 1-1/2 I 2-11/16 1-1/2 J 2-11/16 1-1/2 K 2-11/16 1-1/2 L 2-3/4 1-9/16 M 2-3/4 1-9/16 N 2-13/16 1-5/8 O 2-15/16 1-11/16 P 2-15/16 1-11/16 Q 3 1-11/16 R 3 1-11/16 S 3-1/16 1-3/4 T 3-1/16 1-3/4 U 3-1/8 1-13/16 V 3-1/4 1-7/8 W 3-1/4 1-7/8 X 3-15/16 1-15/16 Y 3-15/16 1-15/16 Z 3-3/8 2
REFERENCE 0307-446
ANSI B94.11 M aircraft extension 12” ground letter drill
Fully ground extension-drill directions include HSS and cobalt-bearing choices. Exact overall length, flute length and material must be confirmed together on the current drawing.
- Construction / finish choices
- fully ground; Co.M35; confirm availability for each size
- Diameter class; individual ordered drawing required
- A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z
REFERENCE 0307-447
ANSI B94.11 M aircraft extension 12” fractional ground drill
Fully ground extension-drill directions include HSS and cobalt-bearing choices. Exact overall length, flute length and material must be confirmed together on the current drawing.
- Construction / finish choices
- fully ground; Co.M35; confirm availability for each size
- Diameter class; individual ordered drawing required
- 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64, 1/2
REFERENCE 0307-448
Reduced-shank HSS drill families
Half-inch reduced shanks, three-quarter-inch reduced shanks and a separate blacksmith-drill schedule are distinct configurations. Select the exact diameter, shank and length from the approved drawing.
- Dimensions and configurations
53 listed configurations · view dimensions
Half-inch reduced-shank direction — diameter | overall | flute; inch references to confirm Half-inch reduced-shank direction — diameter overall flute; inch references to confirm 33/64 6” 3-1/8 17/32 6 3-1/8 35/64 6 3-1/8 9/16 6 3-1/8 37/64 6 3-1/8 19/32 6 3-1/8 39/64 6 3-1/8 5/8 6 3-1/8 41/64 6 3-1/8 21/32 6 3-1/8 43/64 6 3-1/8 11/16 6 3-1/8 45/64 6 3-1/8 23/32 6 3-1/8 47/64 6 3-1/8 3/4 6 3-1/8 49/64 6 3 25/32 6 3 51/64 6 3 13/16 6 3 53/64 6 3 55/64 6 3 7/8 6 3 57/64 6 3 29/32 6 3 59/64 6 3 15/16 6 3 61/64 6 3 31/32 6 3 63/64 6 3 1 6 3 1-1/64 6 3 1-1/32 6 3 1-3/64 6 3 1-1/16 6 3 1-3/32 6 3 1-7/64 6 3 1-1/8 6 3 1-9/64 6 3 1-5/32 6 3 1-11/64 6 3 1-3/16 6 3 1-13/64 6 3 1-7/32 6 3 1-15/64 6 3 1-1/4 6 3 1-17/64 6 3 1-9/32 6 3 1-19/64 6 3 1-5/16 6 3 1-21/64 6 3 1-11/32 6 3 1-23/64 6 3 - Three-quarter-inch reduced-shank direction — diameter references
- 25/32, 13/16, 27/32, 7/8, 29/32, 15/16, 31/32, 1, 1-1/32, 1-1/16, 1-3/32, 1-1/8, 1-5/32, 1-3/16, 1-7/32, 1-1/4, 1-9/32, 1-5/16, 1-11/32, 1-3/8, 1-13/32, 1-7/16, 1-15/32, 1-1/2
- Dimensions and configurations
10 listed configurations · view dimensions
Blacksmith drill direction — diameter | overall | flute; dimensional units to approved drawing Blacksmith drill direction — diameter overall flute 6.0 150 75 8.0 150 75 10.0 150 75 12.0 150 75 14.0 150 75 16.0 150 75 18.0 150 75 20.0 150 75 22.0 150 75 25.0 150 75
REFERENCE 0307-449
DIN338 Carbide tipped drill alloy steel straight shank
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
44 listed configurations · view dimensions
Dia. | L1 Oal | L2 Flute — verify units and ordered drawing Dia. L1 Oal L2 Flute 2.0 49 24 2.5 57 30 3.0 61 33 3.1 65 36 3.2 65 36 3.3 65 36 3.5 70 39 3.6 70 39 4.0 75 43 4.2 75 43 4.3 80 47 4.5 80 47 4.8 86 52 5.0 86 52 5.1 86 52 5.2 86 52 5.3 86 52 5.5 93 57 5.8 93 57 6.0 93 57 6.5 101 63 6.7 101 63 6.8 109 69 7.0 109 69 7.1 109 69 7.5 109 69 8.0 117 75 8.5 117 75 9.0 125 81 9.5 125 81 10.0 133 87 10.2 133 87 10.5 133 87 11.0 142 94 11.5 142 94 12.0 151 101 12.5 151 101 13.0 151 101 13.5 160 108 14.0 160 108 14.5 169 114 15.0 169 114 15.5 178 120 16.0 178 120
REFERENCE 0307-450
DIN338 Carbide tipped drill alloy steel straight shank
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
23 listed configurations · view dimensions
Dia. | L1 Oal | L2 Flute — verify units and ordered drawing Dia. L1 Oal L2 Flute 3.0 61 33 3.2 65 36 3.5 70 39 4.0 75 43 4.5 80 47 4.8 86 52 5.0 86 52 5.5 93 57 6.0 93 57 6.5 101 63 7.0 109 69 7.5 109 69 8.0 117 75 8.5 117 75 9.0 125 81 9.5 125 81 10.0 133 87 10.5 133 87 11.0 142 94 11.5 142 94 12.0 151 101 12.5 151 101 13.0 151 101
REFERENCE 0307-451
DIN345 Carbide tipped drill HSS taper shank
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
105 listed configurations · view dimensions
Dia. | L1 Oal | L2 Flute | Morse taper — verify units and ordered drawing Dia. L1 Oal L2 Flute Morse taper 4.0 124 43 1# 4.2 124 43 1# 4.5 128 43 1# 4.8 133 52 1# 5.0 133 52 1# 5.5 138 57 1# 6.0 138 57 1# 6.5 144 63 1# 7.0 150 69 1# 7.5 150 69 1# 8.0 156 75 1# 8.5 156 75 1# 9.0 162 81 1# 9.5 162 81 1# 10.0 168 87 1# 10.5 168 87 1# 11.0 175 94 1# 11.5 175 94 1# 12.0 182 101 1# 12.5 182 101 1# 13.0 182 101 1# 13.5 189 108 1# 14.0 189 108 1# 14.5 212 114 2# 15.0 212 114 2# 15.5 218 120 2# 16.0 218 120 2# 16.5 223 125 2# 17.0 223 125 2# 17.5 228 130 2# 18.0 228 130 2# 18.5 233 135 2# 19.0 233 135 2# 19.5 238 140 2# 20.0 238 140 2# 20.5 243 145 2# 21.0 243 145 2# 21.5 248 150 2# 22.0 248 150 2# 22.5 253 155 2# 23.0 253 155 3# 23.5 276 155 3# 24.0 281 160 3# 24.5 281 160 3# 25.0 281 160 3# 25.5 286 165 3# 26.0 286 165 3# 26.5 286 165 3# 27.0 291 170 3# 27.5 291 170 3# 28.0 291 170 3# 28.5 296 175 3# 29.0 296 175 3# 29.5 296 175 3# 30.0 296 175 3# 30.5 301 180 3# 31.0 301 180 3# 31.5 301 180 3# 32.0 334 185 4# 32.5 334 185 4# 33.0 334 185 4# 33.5 334 185 4# 34.0 339 190 4# 34.5 339 190 4# 35.0 339 190 4# 35.5 339 190 4# 36.0 344 195 4# 36.5 344 195 4# 37.0 344 195 4# 37.5 344 195 4# 38.0 349 200 4# 38.5 349 200 4# 39.0 349 200 4# 39.5 349 200 4# 40.0 349 200 4# 40.5 354 205 4# 41.0 354 205 4# 41.5 354 205 4# 42.0 354 205 4# 42.5 354 205 4# 43.0 359 210 4# 43.5 359 210 4# 44.0 359 210 4# 44.5 359 210 4# 45.0 356 210 4# 45.5 364 215 4# 46.0 364 215 4# 46.5 364 215 4# 47.0 364 215 4# 47.5 364 215 4# 48.0 369 220 4# 48.5 369 220 4# 49.0 369 220 4# 49.5 369 220 4# 50.0 369 220 4# 50.5 374 225 4# 51.0 412 225 5# 52.0 412 225 5# 53.0 412 225 5# 54.0 417 230 5# 55.0 417 230 5# 57.0 422 235 5# 58.0 422 235 5# 59.0 422 235 5# 60.0 422 235 5#
REFERENCE 0307-452
DIN345 Carbide tipped drill carbon taper shank
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
105 listed configurations · view dimensions
Dia. | L1 Oal | L2 Flute | Morse taper — verify units and ordered drawing Dia. L1 Oal L2 Flute Morse taper 4.0 124 43 1# 4.2 124 43 1# 4.5 128 43 1# 4.8 133 52 1# 5.0 133 52 1# 5.5 138 57 1# 6.0 138 57 1# 6.5 144 63 1# 7.0 150 69 1# 7.5 150 69 1# 8.0 156 75 1# 8.5 156 75 1# 9.0 162 81 1# 9.5 162 81 1# 10.0 168 87 1# 10.5 168 87 1# 11.0 175 94 1# 11.5 175 94 1# 12.0 182 101 1# 12.5 182 101 1# 13.0 182 101 1# 13.5 189 108 1# 14.0 189 108 1# 14.5 212 114 2# 15.0 212 114 2# 15.5 218 120 2# 16.0 218 120 2# 16.5 223 125 2# 17.0 223 125 2# 17.5 228 130 2# 18.0 228 130 2# 18.5 233 135 2# 19.0 233 135 2# 19.5 238 140 2# 20.0 238 140 2# 20.5 243 145 2# 21.0 243 145 2# 21.5 248 150 2# 22.0 248 150 2# 22.5 253 155 2# 23.0 253 155 3# 23.5 276 155 3# 24.0 281 160 3# 24.5 281 160 3# 25.0 281 160 3# 25.5 286 165 3# 26.0 286 165 3# 26.5 286 165 3# 27.0 291 170 3# 27.5 291 170 3# 28.0 291 170 3# 28.5 296 175 3# 29.0 296 175 3# 29.5 296 175 3# 30.0 296 175 3# 30.5 301 180 3# 31.0 301 180 3# 31.5 301 180 3# 32.0 334 185 4# 32.5 334 185 4# 33.0 334 185 4# 33.5 334 185 4# 34.0 339 190 4# 34.5 339 190 4# 35.0 339 190 4# 35.5 339 190 4# 36.0 344 195 4# 36.5 344 195 4# 37.0 344 195 4# 37.5 344 195 4# 38.0 349 200 4# 38.5 349 200 4# 39.0 349 200 4# 39.5 349 200 4# 40.0 349 200 4# 40.5 354 205 4# 41.0 354 205 4# 41.5 354 205 4# 42.0 354 205 4# 42.5 354 205 4# 43.0 359 210 4# 43.5 359 210 4# 44.0 359 210 4# 44.5 359 210 4# 45.0 356 210 4# 45.5 364 215 4# 46.0 364 215 4# 46.5 364 215 4# 47.0 364 215 4# 47.5 364 215 4# 48.0 369 220 4# 48.5 369 220 4# 49.0 369 220 4# 49.5 369 220 4# 50.0 369 220 4# 50.5 374 225 4# 51.0 412 225 5# 52.0 412 225 5# 53.0 412 225 5# 54.0 417 230 5# 55.0 417 230 5# 57.0 422 235 5# 58.0 422 235 5# 59.0 422 235 5# 60.0 422 235 5#
REFERENCE 0307-453
HSS fully ground saw drill 135° split point
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dia. — dimensional units and current drawing to confirm
- 3.0; 4.0; 5.0; 6.0; 6.5; 8.0; 9.0; 9.5; 10.0; 11.0; 12.0; 13.0
REFERENCE 0307-454
HSS fully ground saw drill 135° split point Hex shank
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dia. — dimensional units and current drawing to confirm
- 3.0; 4.0; 5.0; 6.0; 6.5; 8.0; 9.0; 9.5; 10.0; 11.0; 12.0; 13.0
REFERENCE 0307-455
DIN333 center drill, Form A
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
14 listed configurations · view dimensions
Dia. | Shk Dia. | L1 Oal | L2 Flute — verify units and ordered drawing Dia. Shk Dia. L1 Oal L2 Flute 0.5 3.15 20 0.8 0.8 3.15 20 1.1 1.0 3.15 31.5 1.3 1.25 3.15 31.5 1.6 1.6 4.0 35.5 2.0 2.0 5.0 40.0 2.5 2.5 6.3 45 3.1 3.15 8.0 50.0 3.9 4.0 10.0 56.0 5.0 5.0 12.5 63.0 6.3 6.3 16.0 71.0 8.0 8.0 20.0 80 10.1 10.0 25.0 100 12.8 12.5 31.5 125 16.5
REFERENCE 0307-456
DIN333 center drill, Form B
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
11 listed configurations · view dimensions
Dia. | Shk Dia. | Drill Dia. | L1 Oal | L2 Flute — verify units and ordered drawing Dia. Shk Dia. Drill Dia. L1 Oal L2 Flute 1.0 4.0 2.12 35.5 1.3 1.25 5.0 2.65 40.0 1.6 1.6 6.3 3.35 45.0 2.0 2.0 8.0 4.25 50.0 2.5 2.5 10.0 5.3 56.0 3.1 3.15 11.2 6.7 60.0 3.9 4.0 14.0 8.5 67.0 5.0 5.0 18.0 10.6 75.0 6.3 6.3 20.0 13.2 80.0 8.0 8.0 25.0 17.0 100.0 10.1 10.0 31.5 21.2 125.0 12.8
REFERENCE 0307-457
DIN333 center drill, Form R
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
14 listed configurations · view dimensions
Dia. | Shk Dia. | L1 Oal | L2 Flute | r Radius — verify units and ordered drawing Dia. Shk Dia. L1 Oal L2 Flute r Radius 0.5 3.15 20.0 2.12 1.25-1.6 0.8 3.15 20.0 2.65 2-2.5 1.0 3.15 31.5 3.0 2.5-3.15 1.25 3.15 31.5 3.35 3.15-4.0 1.6 4.0 35.5 4.25 4.0-5.0 2.0 5.0 40.0 5.3 5.0-6.3 2.5 6.3 45.0 6.7 6.3-8.0 3.15 8.0 50.0 8.5 8.0-10.0 4.0 10.0 56.0 10.6 10.0-12.5 5.0 12.5 63.0 13.2 12.5-16.0 6.3 16.0 71.0 17.0 16.0-20.0 8.0 20.0 80.0 21.2 20.0-25.0 10.0 25.0 100.0 26.5 25.0-31.5 12.5 31.5 125.0 33.5 31.5-40.0
REFERENCE 0307-458
DIN8374 HSS 90° subland drill with parallel shank
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- HSS-E; confirm availability for each size
- Dimensions and configurations
6 listed configurations · view dimensions
For Thread | step | Countersinker | Step Length | Flute Length | Total Length — verify units and ordered drawing For Thread step Countersinker Step Length Flute Length Total Length M3 3.2 6.0 9.0 57.0 93.0 M4 4.3 8.0 11.0 75.0 117.0 M5 5.3 10.0 13.0 87.0 133.0 M6 6.4 11.5 15.0 94.0 142.0 M8 8.4 15.0 19.0 114.0 169.0 M10 10.5 19.0 23.0 130.0 198.0
REFERENCE 0307-459
DIN8376 HSS 180° subland drill with parallel shank
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- HSS-E; confirm availability for each size
- Dimensions and configurations
6 listed configurations · view dimensions
For Thread | step | Countersinker | Step Length | Flute Length | Total Length — verify units and ordered drawing For Thread step Countersinker Step Length Flute Length Total Length M3 3.4 6.0 9.0 57.0 93.0 M4 4.5 8.0 11.0 75.0 117.0 M5 5.5 10.0 13.0 87.0 133.0 M6 6.6 11.0 15.0 94.0 142.0 M8 9.0 15.0 19.0 114.0 169.0 M10 11.0 18.0 23.0 130.0 191.0
REFERENCE 0307-460
DIN338 Type N HSS straight shank twist drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- roll forged; confirm availability for each size
- Dimensions and configurations
27 listed configurations · view dimensions
Dia | L1 Oal. | L2 Flute — verify units and ordered drawing Dia L1 Oal. L2 Flute 1 34 12 1.5 40 18 2 49 24 2.5 57 30 3 61 33 3.2 65 36 3.5 70 39 4 75 43 4.5 80 47 4.8 86 52 5 86 52 5.5 93 57 6 93 57 6.5 101 63 7 109 69 7.5 109 69 8 117 75 8.5 117 75 9 125 81 9.5 125 81 10 133 87 10.5 133 87 11 142 94 11.5 142 94 12 151 101 12.5 151 101 13 151 101
REFERENCE 0307-461
DIN338 HSS hex shank drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
12 listed configurations · view dimensions
Dia. | L1 Oal | L2 Flute — verify units and ordered drawing Dia. L1 Oal L2 Flute 1.5 40 18 2 49 24 2.5 57 30 3 61 33 3.5 70 39 4 75 43 4.5 80 47 4.8 86 52 5 86 52 5.5 93 57 6 93 57 6.5 101 63 - Dimensions and configurations
12 listed configurations · view dimensions
Dia. | L1 Oal | L2 Flute — verify units and ordered drawing (alternative schedule 2) Dia. L1 Oal L2 Flute 1.5 40 18 2 49 24 2.5 57 30 3 61 33 3.5 70 39 4 75 43 4.5 80 47 4.8 86 52 5 86 52 5.5 93 57 6 93 57 6.5 101 63
REFERENCE 0307-462
HSS reduced shank drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
30 listed configurations · view dimensions
Dia | L1 Oal | L2 flute — verify units and ordered drawing Dia L1 Oal L2 flute 10.5 133 87 11 142 94 11.5 142 94 12 151 101 12.5 151 101 13 151 101 13.5 160 108 14 160 108 14.5 169 114 15 169 114 15.5 178 120 16 178 120 16.5 184 125 17 184 125 17.5 191 130 18 191 130 18.5 198 135 19 198 135 19.5 205 140 20 205 140 20.5 225 145 21 225 145 21.5 230 150 22 230 150 22.5 230 155 23 230 155 23.5 230 155 24 250 160 24.5 250 160 25 250 160
REFERENCE 0307-463
DIN338 HSS GT twist drill with split point
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
33 listed configurations · view dimensions
Dia | L1 Oal | L2 Flute — verify units and ordered drawing Dia L1 Oal L2 Flute 1 34 12 1.5 40 18 2 49 24 2.5 57 30 3 61 33 3.2 65 36 3.5 70 39 4 75 43 4.5 80 47 4.8 86 52 5 86 52 5.5 93 57 6 93 57 6.5 101 63 7 109 69 7.5 109 69 8 117 75 8.5 117 75 9 125 81 9.5 125 81 10 133 87 10.5 133 87 11 142 94 11.5 142 94 12 151 101 12.5 151 101 13 151 101 13.5 160 108 14 160 108 14.5 169 114 15 169 114 15.5 178 120 16 178 120
REFERENCE 0307-464
HSS aircraft extension fully ground drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
21 listed configurations · view dimensions
Dia | L1 Oal | L2 Flute — verify units and ordered drawing Dia L1 Oal L2 Flute 3 150 40 3.5 150 45 4 150 50 4.5 150 54 5 150 60 5.5 150 65 6 150 70 6.5 150 70 7 150 75 7.5 150 75 8 150 80 8.5 150 85 9 150 90 9.5 150 92 10 150 95 10.5 150 100 11 150 102 11.5 150 105 12 150 110 12.5 150 110 13 150 115 - Dimensions and configurations
21 listed configurations · view dimensions
Dia | L1 Oal | L2 Flute — verify units and ordered drawing (alternative schedule 2) Dia L1 Oal L2 Flute 3 300 40 3.5 300 45 4 300 50 4.5 300 54 5 300 60 5.5 300 65 6 300 70 6.5 300 70 7 300 75 7.5 300 75 8 300 80 8.5 300 85 9 300 90 9.5 300 92 10 300 95 10.5 300 100 11 300 102 11.5 300 105 12 300 110 12.5 300 110 13 300 115
REFERENCE 0307-465
DIN340 HSS straight shank long series twist drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- roll forged; confirm availability for each size
- Dimensions and configurations
25 listed configurations · view dimensions
Dia | L1 Oal | L2 Flute — verify units and ordered drawing Dia L1 Oal L2 Flute 2 85 56 2.5 95 62 3 100 66 3.2 106 69 3.5 112 73 4 119 78 4.5 126 82 4.8 132 87 5 132 87 5.5 139 91 6 139 91 6.5 148 97 7 156 102 7.5 156 102 8 165 109 8.5 165 109 9 175 115 9.5 175 115 10 184 121 10.5 184 121 11 195 128 11.5 195 128 12 205 134 12.5 205 134 13 205 134
REFERENCE 0307-466
DIN345 HSS metric taper shank twist drill, right hand
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
106 listed configurations · view dimensions
Dia | L1 Oal | L2 flute | Morse taper — verify units and ordered drawing Dia L1 Oal L2 flute Morse taper 4 124 43 1# 4.2 124 43 1# 4.5 128 43 1# 4.8 133 52 1# 5 133 52 1# 5.5 138 57 1# 6 138 57 1# 6.5 144 63 1# 7 150 69 1# 7.5 150 69 1# 8 156 75 1# 8.5 156 75 1# 9 162 81 1# 9.5 162 81 1# 10 168 87 1# 10.5 168 87 1# 11 175 94 1# 11.5 175 94 1# 12 182 101 1# 12.5 182 101 1# 13 182 101 1# 13.5 189 108 1# 14 189 108 1# 14.5 212 114 2# 15 212 114 2# 15.5 218 120 2# 16 218 120 2# 16.5 223 125 2# 17 223 125 2# 17.5 228 130 2# 18 228 130 2# 18.5 233 135 2# 19 233 135 2# 19.5 238 140 2# 20 238 140 2# 20.5 243 145 2# 21 243 145 2# 21.5 248 150 2# 22 248 150 2# 22.5 253 155 2# 23 253 155 3# 23.5 276 155 3# 24 281 160 3# 24.5 281 160 3# 25 281 160 3# 25.5 286 165 3# 26 286 165 3# 26.5 286 165 3# 27 291 170 3# 27.5 291 170 3# 28 291 170 3# 28.5 296 175 3# 29 296 175 3# 29.5 296 175 3# 30 296 175 3# 30.5 301 180 3# 31 301 180 3# 31.5 301 180 3# 32 334 185 4# 32.5 334 185 4# 33 334 185 4# 33.5 334 185 4# 34 339 190 4# 34.5 339 190 4# 35 339 190 4# 35.5 339 190 4# 36 344 195 4# 36.5 344 195 4# 37 344 195 4# 37.5 344 195 4# 38 349 200 4# 38.5 349 200 4# 39 349 200 4# 39.5 349 200 4# 40 349 200 4# 40.5 354 205 4# 41 354 205 4# 41.5 354 205 4# 42 354 205 4# 42.5 354 205 4# 43 359 210 4# 43.5 359 210 4# 44 359 210 4# 44.5 359 210 4# 45 356 210 4# 45.5 364 215 4# 46 364 215 4# 46.5 364 215 4# 47 364 215 4# 47.5 364 215 4# 48 369 220 4# 48.5 369 220 4# 49 369 220 4# 49.5 369 220 4# 50 369 220 4# 50.5 374 225 4# 51 412 225 5# 52 412 225 5# 53 412 225 5# 54 417 230 5# 55 417 230 5# 56 417 230 5# 57 422 235 5# 58 422 235 5# 59 422 235 5# 60 422 235 5#
REFERENCE 0307-467
DIN1897 HSS straight shank stub drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- roll forged; confirm availability for each size
- Dimensions and configurations
29 listed configurations · view dimensions
Dia | L1 Oal | L2 Flute — verify units and ordered drawing Dia L1 Oal L2 Flute 1 26 6 1.5 32 9 2 38 12 2.5 43 14 3 46 16 3.1 49 18 3.2 49 18 3.5 52 20 4 55 22 4.1 55 22 4.2 55 22 4.5 58 24 5 62 26 5.5 66 28 6 66 28 6.5 70 31 7 74 34 7.5 74 34 8 79 37 8.5 79 37 9 84 40 9.5 84 40 10 89 43 10.5 89 43 11 95 47 11.5 95 47 12 102 51 12.5 102 51 13 102 51
REFERENCE 0307-468
HSS ground double end drill 135° split point
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- HSS; confirm availability for each size
- Dimensions and configurations
23 listed configurations · view dimensions
Dia | L1 Oal | L2 Flute — verify units and ordered drawing Dia L1 Oal L2 Flute 2.5 43 9.5 3 46 11 3.1 49 11 3.2 49 11 3.25 49 11 3.3 49 11 3.4 52 14 3.5 52 14 4 55 14 4.1 55 14 4.2 55 14 4.5 58 17 4.8 62 17 5 62 17 5.1 62 17 5.2 62 17 5.25 62 17 5.5 66 20 6 66 20 6.5 70 20 7 70 20 7.5 70 20 8 81 20
REFERENCE 0307-469
Guide drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
3 listed configurations · view dimensions
Dia | L1 Oal — verify units and ordered drawing Dia L1 Oal 5 90 6 90 7 90
REFERENCE 0307-470
HSS spot weld drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- HSS; confirm availability for each size
- Dimensions and configurations
4 listed configurations · view dimensions
Dia | L1 Oal — verify units and ordered drawing Dia L1 Oal 6 66 7 74 8 80 10 88
REFERENCE 0307-471
DIN1869 VA deep hole ground drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
26 listed configurations · view dimensions
Dia | L1 Oal | L2 flute — verify units and ordered drawing Dia L1 Oal L2 flute 2 125 85 2.5 140 95 3 150 100 3.2 155 105 3.3 155 105 3.5 165 115 4 175 120 4.2 175 120 4.5 185 125 5 195 135 5.5 205 140 6 205 140 6.5 215 150 7 225 155 7.5 225 155 8 240 165 8.5 240 165 9 250 175 9.5 250 175 10 265 185 10.5 265 185 11 280 195 11.5 280 195 12 295 205 12.5 295 205 13 295 205 - Dimensions and configurations
24 listed configurations · view dimensions
Dia | L1 Oal | L2 flute — verify units and ordered drawing (alternative schedule 2) Dia L1 Oal L2 flute 3 190 130 3.2 200 135 3.3 200 135 3.5 210 145 4 220 150 4.2 220 150 4.5 235 160 5 245 170 5.5 260 180 6 260 180 6.5 275 190 7 290 200 7.5 290 200 8 305 210 8.5 305 210 9 320 220 9.5 320 220 10 340 235 10.5 340 235 11 365 250 11.5 365 250 12 375 260 12.5 375 260 13 375 260 - Dimensions and configurations
21 listed configurations · view dimensions
Dia | L1 Oal | L2 flute — verify units and ordered drawing (alternative schedule 3) Dia L1 Oal L2 flute 3.5 265 180 4 280 190 4.2 280 190 4.5 295 200 5 315 210 5.5 330 225 6 330 225 6.5 350 235 7 370 250 7.5 370 250 8 390 265 8.5 390 265 9 410 280 9.5 410 280 10 430 295 10.5 430 295 11 455 310 11.5 455 310 12 480 330 12.5 480 330 13 480 330
REFERENCE 0307-472
HSS step drill CBN ground (metric/inch)
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- straight flute; confirm availability for each size
- Dimensions and configurations
21 listed configurations · view dimensions
Step | L1 Oal | Drilling range | Shk Dia. — verify units and ordered drawing Step L1 Oal Drilling range Shk Dia. 5 54 4.8-10.65 6 5 65 4.0-12.0 6 7 69 5.0-28.0 9 7 65 6.0-25.0 10 7 85 12.5-30.5 12 8 75 6.0-26.75 10 8 75 6.0-32.0 10 8 71 6.0-20.0 9 9 65 4.0-12.0 6 9 75 4.0-20.0 8 9 76 6.0-32.0 13 10 80 4.0-22.0 10 10 85 9.0-36.0 12 10 112 13.0-38.0 12 11 90 5.0-30.5 10 12 100 6.0-38.0 10 12 100 6.0-37.0 10 13 107 4.0-39.0 10 14 100 4.0-30.0 10 14 95 5.0-38.0 12 16 105 6.0-40.0 13
REFERENCE 0307-473
DIN1869 VA deep hole cobalt ground drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
26 listed configurations · view dimensions
Dia | L1 Oal | L2 flute — verify units and ordered drawing Dia L1 Oal L2 flute 2 125 85 2.5 140 95 3 150 100 3.2 155 105 3.3 155 105 3.5 165 115 4 175 120 4.2 175 120 4.5 185 125 5 195 135 5.5 205 140 6 205 140 6.5 215 150 7 225 155 7.5 225 155 8 240 165 8.5 240 165 9 250 175 9.5 250 175 10 265 185 10.5 265 185 11 280 195 11.5 280 195 12 295 205 12.5 295 205 13 295 205 - Dimensions and configurations
24 listed configurations · view dimensions
Dia | L1 Oal | L2 flute — verify units and ordered drawing (alternative schedule 2) Dia L1 Oal L2 flute 3 190 130 3.2 200 135 3.3 200 135 3.5 210 145 4 220 150 4.2 220 150 4.5 235 160 5 245 170 5.5 260 180 6 260 180 6.5 275 190 7 290 200 7.5 290 200 8 305 210 8.5 305 210 9 320 220 9.5 320 220 10 340 235 10.5 340 235 11 365 250 11.5 365 250 12 375 260 12.5 375 260 13 375 260 - Dimensions and configurations
21 listed configurations · view dimensions
Dia | L1 Oal | L2 flute — verify units and ordered drawing (alternative schedule 3) Dia L1 Oal L2 flute 3.5 265 180 4 280 190 4.2 280 190 4.5 295 200 5 315 210 5.5 330 225 6 330 225 6.5 350 235 7 370 250 7.5 370 250 8 390 265 8.5 390 265 9 410 280 9.5 410 280 10 430 295 10.5 430 295 11 455 310 11.5 455 310 12 480 330 12.5 480 330 13 480 330
REFERENCE 0307-474
JIS B4301-1999 HSS metric straight shank twist drill right hand
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
108 listed configurations · view dimensions
Dia | L1 Oal | L2 flute — verify units and ordered drawing Dia L1 Oal L2 flute 2 55 29 2.05 55 29 2.1 55 29 2.15 55 29 2.2 58 33 2.3 58 33 2.4 61 35 2.5 61 35 2.6 64 37 2.65 64 37 2.7 64 37 2.8 67 39 2.9 71 42 3 71 42 3.1 71 42 3.15 71 42 3.2 71 42 3.3 73 45 3.4 73 45 3.5 73 45 3.6 76 48 3.7 76 48 3.8 76 48 3.9 79 51 4 83 54 4.1 83 54 4.2 83 54 4.3 83 54 4.4 86 56 4.5 86 56 4.6 86 56 4.7 89 59 4.8 89 59 4.9 92 62 5 92 62 5.1 92 62 5.2 95 64 5.3 95 64 5.4 95 64 5.5 95 64 5.6 98 67 5.7 98 67 5.8 98 67 5.9 98 67 6 102 70 6.1 102 70 6.2 102 70 6.3 102 70 6.4 105 73 6.5 105 73 6.6 105 73 6.7 105 73 6.8 105 73 6.9 105 73 7 105 73 7.1 108 75 7.2 108 75 7.3 108 75 7.4 111 78 7.5 111 78 7.6 111 78 7.7 114 81 7.8 114 81 7.9 114 81 8 114 81 8.1 117 84 8.2 117 84 8.3 117 84 8.4 121 87 8.5 121 87 8.6 121 87 8.7 121 87 8.8 124 89 8.9 124 89 9 124 89 9.1 124 89 9.2 127 92 9.3 127 92 9.4 127 92 9.5 127 92 9.6 130 95 9.7 130 95 9.8 130 95 9.9 130 95 10 130 95 10.1 133 98 10.2 133 98 10.3 133 98 10.4 133 98 10.5 137 100 10.7 137 100 10.8 140 103 10.9 140 103 11 140 103 11.1 140 103 11.2 143 106 11.3 143 106 11.4 143 106 11.5 143 106 11.7 146 109 11.8 146 109 11.9 146 109 12 149 111 12.1 149 111 12.3 149 111 12.5 152 114 12.7 152 114 13 152 114
REFERENCE 0307-475
HSS straight shank fully ground left hand drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
58 listed configurations · view dimensions
Dia | L1 Oal | L2 flute — verify units and ordered drawing Dia L1 Oal L2 flute 1.6 43 20 1.65 43 20 1.7 43 20 1.75 46 22 1.8 46 22 1.85 46 22 1.9 46 22 1.95 49 24 2 49 24 2.1 49 24 2.2 53 27 2.3 53 27 2.4 57 30 2.5 57 30 2.6 57 30 2.7 61 33 2.8 61 33 2.9 61 33 3 61 33 3.1 65 36 3.2 65 36 3.3 65 36 3.4 70 39 3.5 70 39 3.6 70 39 3.7 70 39 3.8 75 43 3.9 75 43 4 75 43 4.1 75 43 4.2 75 43 4.3 80 47 4.4 80 47 4.5 80 47 4.6 80 47 4.7 80 47 4.8 86 52 4.9 86 52 5 86 52 5.2 86 52 5.5 93 57 5.6 93 57 5.8 93 57 6 93 57 6.5 101 63 7 109 69 7.5 117 75 8 117 75 8.5 125 81 9 125 81 9.5 133 87 10 133 87 10.5 133 87 11 142 94 11.5 142 94 12 151 101 12.5 151 101 13 151 101
REFERENCE 0307-476
HSS tube and sheet shell drill CBN ground
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
9 listed configurations · view dimensions
Type | Shank Dia | Drilling range | RPM — verify units and ordered drawing Type Shank Dia Drilling range RPM A 6.5 3-14 550 A 10 6-20 500 A 10 8-30 400 A 10 20-42 300 A 10 24-53 200 B 6 2.5-7.8 550 B 6 2.5-10.2 550 B 6 2.5-11.8 550 B 6 3-15 550
REFERENCE 0307-477
HSS twist drill Weldon shank
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
13 listed configurations · view dimensions
dia. | cutting depth | oal. — verify units and ordered drawing dia. cutting depth oal. 6 30 62 6.5 30 62 7 30 62 7.5 30 62 8 30 62 8.5 30 62 9 30 62 9.5 30 62 10 30 62 10.5 30 62 11 30 62 11.5 30 62 12 30 62 - Dimensions and configurations
13 listed configurations · view dimensions
dia. | cutting depth | oal. — verify units and ordered drawing (alternative schedule 2) dia. cutting depth oal. 6 55 88 6.5 55 88 7 55 88 7.5 55 88 8 55 88 8.5 55 88 9 55 88 9.5 55 88 10 55 88 10.5 55 88 11 55 88 11.5 55 88 12 55 88
REFERENCE 0307-478
Fully ground turbo-point HSS drills
A fully ground HSS direction includes straight and hex shanks.
- Diameter range
- 1.5–13.0 mm
- Standard reference
- DIN 338
REFERENCE 0307-479
DIN225 Die stock
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
19 listed configurations · view dimensions
size | Thickness | For tap size Metric | UNC/UNF | Pipe | Length — verify units and ordered drawing size Thickness For tap size Metric UNC/UNF Pipe Length 16 5.0 M1-M2.6 1/16 - 3/32 — 160 20 5.0 M3-M4 1/8 - 5/32 — 200 20 7.0 M4.5-M6 3/16 - 1/4 — 200 25 9.0 M7-M9 5/16 G1/16 224 30 11.0 M10-M11 3/8 - 7/16 G1/8 280 38 10.0 MF12-MF14 — G1/4 315 38 14.0 M12-M14 1/2 - 9/16 — 315 45 14.0 MF16-MF20 — G3/8-G1/2 450 45 18.0 M16-M20 5/8 - 3/4 — 450 55 16.0 MF22-MF24 — G5/8-G3/4 560 55 22.0 M22-M24 7/8 - 1 — 560 65 18.0 MF27-MF36 — G7/8-G1 630 65 25.0 M27-M36 1-1/8 - 1-3/8 — 630 75 20.0 MF38-MF42 — G1-1/8-G1-1/4 800 75 30.0 M38-M42 1-1/2 - 1-5/8 — 800 90 22.0 MF45-MF52 — G1-3/8-G1-5/8 900 90 36.0 M45-M52 1-3/4 - 2 — 900 105 22.0 MF54-MF63 — G1-3/4-2 1000 105 36.0 M54-M63 2-1/4 - 2-3/4 — 1000
REFERENCE 0307-480
DIN8140 Wire threaded inserts
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- size — verify units and ordered drawing
- M 2 x 0.4; M 2.2 x 0.45; M 2.5 x 0.45; M 3 x 0.5; M 3.5 x 0.6; M 4 x 0.7; M 5 x 0.8; M 6 x 1.0; M 7 x 1.0; M 8 x 1.25; M 8 x 1.0; M 9 x 1.25; M 10 x 1.5; M 10 x 1.25; M 10 x 1.0; M 11 x 1.5; M 12 x 1.75; M 12 x 1.5; M 12 x 1.25; M 12 x 1.0; M 14 x 2.0; M 14 x 1.5; M 14 x 1.25; M 14 x 1.0; M 16 x 2.0; M 16 x 1.5; M 18 x 2.5; M 18 x 2.0; M 18 x 1.5; M 20 x 2.5; M 20 x 2.0; M 20 x 1.5; M 22 x 2.5; M 22 x 2.0; M 22 x 1.5; M 24 x 3.0; M 24 x 2.0; M 24 x 1.5
REFERENCE 0307-481
Fitting-tools for threaded insert
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
5 listed configurations · view dimensions
size | For drill | For tap — verify units and ordered drawing size For drill For tap 5x0.8 5.2 M5x0.8 6x1.0 6.3 M6x1.0 8x1.25 8.4 M8x1.25 10x1.5 10.4 M10x1.5 12x1.75 12.4 M12x1.75
REFERENCE 0307-482
Pin breaker
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Dimensions and configurations
5 listed configurations · view dimensions
size | For drill | For tap — verify units and ordered drawing size For drill For tap 5x0.8 5.2 M5x0.8 6x1.0 6.3 M6x1.0 8x1.25 8.4 M8x1.25 10x1.5 10.4 M10x1.5 12x1.75 12.4 M12x1.75
REFERENCE 0307-483
DIN223 HSS and alloy steel round die
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Construction / finish choices
- HSS; Alloy steel; confirm availability for each size
- Dimensions and configurations
49 listed configurations · view dimensions
size | Outside — verify units and ordered drawing size Outside No.0-80NF 16×5 No.1-64NC 16×5 No.1-72NF 16×5 No.2-56NC 16×5 No.2-64NF 16×5 No.3-48NC 16×5 No.3-56NF 16×5 No.4-40NC 16×5 No.4-48NF 20×5 No.5-40NC 20×5 No.5-44NF 20×5 No.6-32NC 20×5 No.6-40NF 20×5 No.8-32NC 20×5 No.8-36NF 20×5 No.10-24NC 20×7 No.10-32NF 20×7 No.12-24NC 20×7 No.12-28NF 20×7 1/4-20NC 20×7 1/4-28NF 20×7 5/16-18NC 25×9 5/16-24NF 25×9 3/8-16NC 30×11 3/8-24NF 30×11 7/16-14NC 30×11 7/16-20NF 30×11 1/2-13NC 38×14 1/2-20NF 38×10 9/16-12NC 38×14 9/16-18NF 38×10 5/8-11NC 45×18 5/8-18NF 45×14 3/4-10NC 45×18 3/4-16NF 45×14 7/8-9NC 55×22 7/8-14NF 55×16 1-12NF 55×16 1-14NC 55×16 1-1/8-7NC 65×25 1-1/8-12NF 65×18 1-1/4-7NC 65×25 1-1/4-12NF 65×18 1-3/8-6NC 65×25 1-3/8-12NF 65×18 1-1/2-6NC 75×30 1-1/2-12NF 75×20 1-3/4-5NC 90×36 2-4-1/2NC 90×36
REFERENCE 0307-484
DIN223 UNC/UNF HSS and alloy steel round die
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Construction / finish choices
- HSS; Alloy steel; confirm availability for each size
- Dimensions and configurations
49 listed configurations · view dimensions
size | Outside — verify units and ordered drawing size Outside No.0-80NF 16×5 No.1-64NC 16×5 No.1-72NF 16×5 No.2-56NC 16×5 No.2-64NF 16×5 No.3-48NC 16×5 No.3-56NF 16×5 No.4-40NC 16×5 No.4-48NF 20×5 No.5-40NC 20×5 No.5-44NF 20×5 No.6-32NC 20×5 No.6-40NF 20×5 No.8-32NC 20×5 No.8-36NF 20×5 No.10-24NC 20×7 No.10-32NF 20×7 No.12-24NC 20×7 No.12-28NF 20×7 1/4-20NC 20×7 1/4-28NF 20×7 5/16-18NC 25×9 5/16-24NF 25×9 3/8-16NC 30×11 3/8-24NF 30×11 7/16-14NC 30×11 7/16-20NF 30×11 1/2-13NC 38×14 1/2-20NF 38×10 9/16-12NC 38×14 9/16-18NF 38×10 5/8-11NC 45×18 5/8-18NF 45×14 3/4-10NC 45×18 3/4-16NF 45×14 7/8-9NC 55×22 7/8-14NF 55×16 1-12NF 55×16 1-14NC 55×16 1-1/8-7NC 65×25 1-1/8-12NF 65×18 1-1/4-7NC 65×25 1-1/4-12NF 65×18 1-3/8-6NC 65×25 1-3/8-12NF 65×18 1-1/2-6NC 75×30 1-1/2-12NF 75×20 1-3/4-5NC 90×36 2-4-1/2NC 90×36
REFERENCE 0307-485
HSS and alloy steel round die 25mm outside diameter
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Construction / finish choices
- Alloy steel; HSS; confirm availability for each size
- Dimensions and configurations
7 listed configurations · view dimensions
Thread | Pitch | Outside — verify units and ordered drawing Thread Pitch Outside M3 0.5 25×9 M4 0.7 25×9 M5 0.8 25×9 M6 1 25×9 M8 1.25 25×9 M10 1.5 25×9 M12 1.75 25×9 - Dimensions and configurations
8 listed configurations · view dimensions
1”O.D.alloy steel fractional size round die — Thread | Pitch — verify units and ordered drawing 1”O.D.alloy steel fractional size round die — Thread Pitch 1/4 20NC 1/4 28NF 5/16 18NC 5/16 24NF 3/8 16NC 7/16 14NC 7/16 20NF 1/2 13NC
REFERENCE 0307-486
DIN382 HSS and alloy steel Hexagon die
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
37 listed configurations · view dimensions
High speed steel — Thread | Pitch | Outside — verify units and ordered drawing High speed steel — Thread Pitch Outside M3 0.35 19×5 M3 0.5 19×5 M3.5 0.6 19×5 M4 0.7 19×5 M5 0.5 19×5 M5 0.8 19×7 M6 0.75 19×5 M6 1 19×7 M8 0.75 22×9 M8 1.25 22×9 M10 1 27×11 M10 1.5 27×11 M12 1 36×10 M12 1.75 36×14 M14 1 36×14 M14 1.5 36×10 M14 2 36×14 M16 1.5 41×14 M16 2 41×18 M18 1.5 41×14 M18 2 41×14 M18 2.5 41×18 M20 1.5 41×14 M20 2 41×14 M20 2.5 41×18 M22 1.5 50×16 M22 2 50×16 M22 2.5 50×22 M24 1.5 50×16 M24 2 50×16 M24 3 50×22 M27 1.5 60×18 M27 2 60×18 M27 3 60×25 M30 1.5 60×18 M30 2 60×18 M30 3.5 60×25 - Dimensions and configurations
54 listed configurations · view dimensions
Alloy-steel direction — size | Outside | Unlabelled dimension — verify units and ordered drawing Alloy-steel direction — size Outside Unlabelled dimension M3×0.35 19×5 — M3×0.5 19×5 — M3.5×0.6 19×5 — M4×0.5 19×5 — M4×0.7 19×5 — M4.5×0.75 19×7 — M5×0.5 19×5 — M5×0.8 19×7 — M6×0.75 19×5 — M6×1 19×7 — M7×0.75 22×9 — M8×1 22×9 — M8×0.75 22×9 — M8×1.25 22×9 — M9×1 22×9 — M9×1.25 22×9 — M10×1 27×11 — M10×1.5 27×11 — M12×1 36×10 — M12×1.25 36×10 — M12×1.5 36×10 — M12×1.75 36×14 — M14×1 36×14 — M14×1.25 36×10 — M14×1.5 36×10 — M14×2 36×14 — M16×1.5 41×14 — M16×2 41×18 — M18×1.5 41×14 — M18×2 41×14 — M18×2.5 41×18 — M20×1.5 41×14 — M20×2 41×14 — M20×2.5 45×18 — M22×1.5 50×16 — M22×2 50×16 — M22×2.5 50×22 — M24×1.5 50×16 — M24×2 50×16 — M24×3 50×22 — M27×1.5 60×18 — M27×2 60×18 — M27×3 60×25 — M28×1.5 60×18 — M30×1.5 60×18 — M30×2 60×18 — M30×3.5 60×25 — M33×1.5 60×18 — M33×2 60×18 — M33×3.5 60×25 — M36×1.5 60×18 — M36×2 60×18 — M36×3 60×25 — M36×4 — —
REFERENCE 0307-487
ISO2568 HSS and alloy steel round die
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Construction / finish choices
- Alloy steel; HSS; confirm availability for each size
- Dimensions and configurations
66 listed configurations · view dimensions
Thread | Pitch | Outside — verify units and ordered drawing Thread Pitch Outside M1 0.2 16×5 M1 0.25 16×5 M1.2 0.2 16×5 M1.2 0.25 16×5 M1.4 0.2 16×5 M1.4 0.3 16×5 M1.6 0.2 16×5 M1.6 0.35 16×5 M1.8 0.2 16×5 M1.8 0.35 16×5 M2 0.2 16×5 M2 0.4 16×5 M2.2 0.25 16×5 M2.2 0.45 16×5 M2.5 0.35 16×5 M2.5 0.45 16×5 M3 0.35 20×5 M3 0.5 20×5 M3.5 0.35 20×5 M3.5 0.6 20×5 M4 0.5 20×5 M4 0.7 20×5 M4.5 0.5 20×5 M4.5 0.75 20×5 M5 0.5 20×5 M5 0.8 20×7 M5.5 0.5 20×5 M6 0.75 20×7 M6 1 20×7 M7 0.75 25×9 M7 1 25×9 M8 0.75 25×9 M8 1 25×9 M8 1.25 25×9 M10 0.75 30×11 M10 1 30×11 M10 1.25 30×11 M10 1.5 30×11 M12 1 38×10 M12 1.25 38×10 M12 1.5 38×10 M12 1.75 38×14 M16 1 45×14 M16 1.5 45×14 M16 2 45×18 M18 1 45×14 M18 1.5 45×14 M18 2 45×14 M18 2.5 45×18 M20 1 45×14 M20 1.5 45×14 M20 2 45×14 M20 2.5 45×18 M24 1 55×16 M24 1.5 55×16 M24 2 55×16 M24 3 55×22 M27 1 65×18 M27 1.5 65×18 M27 2 65×18 M27 3 65×25 M30 1 65×18 M30 1.5 65×18 M30 2 65×18 M30 3 65×25 M30 3.5 65×25
REFERENCE 0307-488
DIN885 HSS side&face milling cutter straight tooth
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together. Metric and fractional schedules remain separate nominal directions; confirm the unit for each ordered dimension.
- Dimensions and configurations
264 listed configurations · view dimensions
size | Width face | Hole Dia — verify units and ordered drawing size Width face Hole Dia 2” 3/16 1/2 2 1/4 1/2 2 5/16 1/2 2 3/8 1/2 2 3/16 5/8 2 1/4 5/8 2 5/16 5/8 2 3/8 5/8 2 1/4 7/8 2 5/16 7/8 2 3/8 7/8 2 7/16 7/8 2-1/2 3/16 7/8 2-1/2 1/4 7/8 2-1/2 5/16 7/8 2-1/2 3/8 7/8 2-1/2 7/16 7/8 2-1/2 1/2 7/8 2-1/2 9/16 7/8 2-1/2 5/8 7/8 2-1/2 3/16 1 2-1/2 1/4 1 2-1/2 5/16 1 2-1/2 3/8 1 2-1/2 7/16 1 2-1/2 1/2 1 2-1/2 9/16 1 2-1/2 5/8 1 3 3/16 1 3 7/32 1 3 1/4 1 3 9/32 1 3 5/16 1 3 11/32 1 3 3/8 1 3 13/32 1 3 7/16 1 3 1/2 1 3 9/16 1 3 5/8 1 3 11/16 1 3 3/4 1 3 13/16 1 3 7/8 1 3 15/16 1 3 1 1 3 3/16 1-1/4 3 7/32 1-1/4 3 1/4 1-1/4 3 9/32 1-1/4 3 5/16 1-1/4 3 11/32 1-1/4 3 3/8 1-1/4 3 13/32 1-1/4 3 7/16 1-1/4 3 1/2 1-1/4 3 9/16 1-1/4 3 5/8 1-1/4 3 11/16 1-1/4 3 3/4 1-1/4 3 13/16 1-1/4 3 7/8 1-1/4 3 15/16 1-1/4 3 1 1-1/4 3-1/2 3/16 1 3-1/2 1/4 1 3-1/2 5/16 1 3-1/2 3/8 1 3-1/2 7/16 1 3-1/2 1/2 1 3-1/2 5/8 1 3-1/2 7/16 1-1/4 3-1/2 1/2 1-1/4 4 3/16 1 4 7/32 1 4 1/4 1 4 9/32 1 4 5/16 1 4 11/32 1 4 3/8 1 4 13/32 1 4 7/16 1 4 1/2 1 4 9/16 1 4 5/8 1 4 11/16 1 4 3/4 1 4 13/16 1 4 7/8 1 4 15/16 1 4 1 1 4 1-1/8 1 4 1-1/4 1 4 1-1/2 1 4 3/16 1-1/4 4 7/32 1-1/4 4 1/4 1-1/4 4 9/32 1-1/4 4 5/16 1-1/4 4 11/32 1-1/4 4 3/8 1-1/4 4 13/32 1-1/4 4 7/16 1-1/4 4 1/2 1-1/4 4 9/16 1-1/4 4 5/8 1-1/4 4 11/16 1-1/4 4 3/4 1-1/4 4 13/16 1-1/4 4 7/8 1-1/4 4 15/16 1-1/4 4 1 1-1/4 4 1-1/8 1-1/4 4 1-1/4 1-1/4 4 1-1/2 1-1/4 4-1/2 3/8 1-1/4 4-1/2 7/16 1-1/4 4-1/2 1/2 1-1/4 5 1/4 1 5 9/32 1 5 5/16 1 5 11/32 1 5 3/8 1 5 13/32 1 5 7/16 1 5 1/2 1 5 9/16 1 5 5/8 1 5 11/16 1 5 3/4 1 5 13/16 1 5 7/8 1 5 15/16 1 5 1 1 5 1/4 1-1/4 5 9/32 1-1/4 5 5/16 1-1/4 5 11/32 1-1/4 5 3/8 1-1/4 5 13/32 1-1/4 5 7/16 1-1/4 5 1/2 1-1/4 5 9/16 1-1/4 5 5/8 1-1/4 5 11/16 1-1/4 5 3/4 1-1/4 5 13/16 1-1/4 5 7/8 1-1/4 5 15/16 1-1/4 5 1 1-1/4 5 1-1/4 1-1/4 6 1/4 1 6 5/16 1 6 3/8 1 6 7/16 1 6 1/2 1 6 9/16 1 6 5/8 1 6 11/16 1 6 3/4 1 6 13/16 1 6 7/8 1 6 15/16 1 6 1 1 6 1-1/4 1 6 1/4 1-1/4 6 9/32 1-1/4 6 5/16 1-1/4 6 11/32 1-1/4 6 3/8 1-1/4 6 13/32 1-1/4 6 7/16 1-1/4 6 1/2 1-1/4 6 9/16 1-1/4 6 5/8 1-1/4 6 11/16 1-1/4 6 3/4 1-1/4 6 13/16 1-1/4 6 7/8 1-1/4 6 15/16 1-1/4 6 1 1-1/4 6 1-1/8 1-1/4 6 1-1/4 1-1/4 7 1/4 1-1/4 7 5/16 1-1/4 7 3/8 1-1/4 7 7/16 1-1/4 7 1/2 1-1/4 7 9/16 1-1/4 7 5/8 1-1/4 7 11/16 1-1/4 7 3/4 1-1/4 7 13/16 1-1/4 7 7/8 1-1/4 7 15/16 1-1/4 7 1 1-1/4 8 1/4 1-1/4 8 5/16 1-1/4 8 3/8 1-1/4 8 7/16 1-1/4 8 1/2 1-1/4 8 9/16 1-1/4 8 5/8 1-1/4 8 11/16 1-1/4 8 3/4 1-1/4 8 13/16 1-1/4 8 7/8 1-1/4 8 15/16 1-1/4 8 1 1-1/4 8 1/4 1-1/2 9 1/4 1-1/4 9 3/8 1-1/4 9 1/2 1-1/4 9 5/8 1-1/4 9 3/4 1-1/4 9 1 1-1/4 10 5/8 1-1/4 10 3/4 1-1/4 10 1/4 1-1/2 10 5/16 1-1/2 10 3/8 1-1/2 10 7/16 1-1/2 10 1/2 1-1/2 10 9/16 1-1/2 10 5/8 1-1/2 10 11/16 1-1/2 10 3/4 1-1/2 10 13/16 1-1/2 10 7/8 1-1/2 10 15/16 1-1/2 10 1 1-1/2 10 1-1/8 1-1/2 10 1-1/4 1-1/2 10 1-1/2 1-1/2 50mm 4 16 50 5 16 50 6 16 50 8 16 50 10 16 63 4 22 63 5 22 63 6 22 63 8 22 63 10 22 63 12 22 63 14 22 63 16 22 80 5 27 80 6 27 80 8 27 80 10 27 80 12 27 80 14 27 80 16 27 80 18 27 80 20 27 100 6 32 100 8 32 100 10 32 100 12 32 100 14 32 100 16 32 100 18 32 100 20 32
REFERENCE 0307-489
Dovetail angular cutters
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements. Metric and fractional schedules remain separate nominal directions; confirm the unit for each ordered dimension.
- Dimensions and configurations
22 listed configurations · view dimensions
size | Cutter width | Shank Dia. | Oal. | Angel — verify units and ordered drawing size Cutter width Shank Dia. Oal. Angel 3/8” 1/8 3/8 2-1/8 45° 1/2 5/32 3/8 2-1/8 45° 3/4 1/4 3/8 2-1/8 45° 1-3/8 7/16 5/8 2-7/8 45° 1-7/8 9/16 7/8 3-1/4 45° 2-1/4 5/8 1 3-3/4 45° 13mm 4 12 54 45° 16 4 12 60 45° 19 5 12 63 45° 25 6.3 12 67 45° 32 8 16 71 45° 3/8” 3/16 3/8 2-1/8 60° 1/2 1/4 3/8 2-1/8 60° 3/4 5/16 3/8 2-1/8 60° 1-3/8 9/16 5/8 2-7/8 60° 1-7/8 13/16 7/8 3-1/4 60° 2-1/4 1-1/16 1 3-3/4 60° 13 5.8 5.8 54 60° 16 6.3 6.3 60 60° 19 8 8 63 60° 25 10 10 67 60° 32 12.5 12.5 71 60°
REFERENCE 0307-490
Dovetail angular cutters screwed shank
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements. Metric and fractional schedules remain separate nominal directions; confirm the unit for each ordered dimension.
- Dimensions and configurations
38 listed configurations · view dimensions
size | Cutter width | Shank Dia. | Oal. | Angel — verify units and ordered drawing size Cutter width Shank Dia. Oal. Angel 1/2” 1/8 1/2 2-5/8 45° 5/8 5/32 1/2 2-5/8 45° 3/4 7/32 1/2 2-5/8 45° 7/8 1/4 1/2 2-11/16 45° 1 5/16 1/2 2-3/4 45° 1-1/8 11/32 5/8 2-15/16 45° 1-1/4 11/32 5/8 2-15/16 45° 1-3/8 3/8 1 3-1/16 45° 1-1/2 13/32 1 3-3/32 45° 1 15/32 1/2 2-3/4 55 13mm 3 12 63.5 45° 16 4 12 66.5 45° 19 5.5 12 66.5 45° 22 6.5 12 68.5 45° 25 7.5 12 70 45° 28 8.5 16 71.5 45° 32 8.5 16 74.5 45° 35 9.5 25 79.5 45° 38 10.5 25 80 45° 1/2 5/32 1/2 2-1/2 60° 5/8 7/32 1/2 2-5/8 60° 3/4 9/32 1/2 2-21/32 60° 7/8 3/8 1/2 2-21/32 60° 1 15/32 1/2 2-3/4 60° 1-1/8 1/2 5/8 2-7/8 60° 1-1/4 17/32 5/8 2-15/16 60° 1-3/8 9/16 1 3-1/4 60° 1-1/2 5/8 1 3-5/16 60° 1-1/2 15/32 1/2 2-3/4 55° 13 4 12 63.5 60° 16 5.5 12 66.5 60° 19 7 12 66.5 60° 22 9.5 12 68.5 60° 25 12 12 70 60° 28 12.5 16 71.5 60° 32 13.5 16 74.5 60° 35 14.5 25 84 60° 38 18 25 85.5 60°
REFERENCE 0307-491
T-slot cutters
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements. Metric and fractional schedules remain separate nominal directions; confirm the unit for each ordered dimension.
- Dimensions and configurations
23 listed configurations · view dimensions
Bolt size | cutter Dia. | Cutter width | Neck Dia. | Shank Dia. | Oal. — verify units and ordered drawing Bolt size cutter Dia. Cutter width Neck Dia. Shank Dia. Oal. 1/4” 9/16 15/64 17/64 1/2 2-19/32 5/16 21/32 17/64 21/64 1/2 2-11/16 3/8 25/32 21/64 13/32 3/4 3-1/4 1/2 31/32 25/64 17/32 3/4 3-7/16 5/8 1-1/4 31/64 21/32 1 3-15/16 3/4 1-15/32 5/8 25/32 1 4-7/16 1 1-27/32 53/64 1-1/32 1-1/4 4-13/16 1-1/4 2-7/32 1-3/32 1-9/32 1-1/4 5-3/8 1-1/2 2-21/32 1-11/32 1-17/32 1-1/4 5-29/32 5 11 3.5 4 10 53.5 6 12.5 6 5 10 57 8 16 8 7 10 62 10 18 8 8 12 70 12 21 9 10 12 74 14 25 11 12 16 82 16 29 12.5 13 16 85 18 32 14 15 16 90 20 36 15.5 17 25 101 22 40 18 19 25 108 24 45 20 21 25 112 28 50 22 25 32 124 32 57 24 28 32 131 36 60 28 30 32 139
REFERENCE 0307-492
Roughing T-slot cutters
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
6 listed configurations · view dimensions
Bolt size | cutter Dia. | Cutter width | Neck Dia. | Shank Dia. | Oal. — verify units and ordered drawing Bolt size cutter Dia. Cutter width Neck Dia. Shank Dia. Oal. 1/2 31/32 25/64 17/32 3/4 3-7/16 5/8 1-1/4 31/64 21/32 1 3-15/16 3/4 1-15/32 5/8 25/32 1 4-7/16 1 1-27/32 53/64 1-1/32 1-1/4 4-13/16 1-1/4 2-7/32 1-3/32 1-9/32 1-1/4 5-3/8 1-1/2 2-21/32 1-11/32 1-17/32 1-1/4 5-29/32
REFERENCE 0307-493
T-slot cutters screwed shank type
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements. Metric and fractional schedules remain separate nominal directions; confirm the unit for each ordered dimension.
- Dimensions and configurations
23 listed configurations · view dimensions
Bolt size | cutter Dia. | Cutter width | Neck Dia. | Shank Dia. | Oal. — verify units and ordered drawing Bolt size cutter Dia. Cutter width Neck Dia. Shank Dia. Oal. 5mm 11 3.5 4 10 53.5 6 12.5 6 5 10 57 8 16 8 7 10 62 10 18 8 8 12 70 12 21 9 10 12 74 14 25 11 12 16 82 16 29 12.5 13 16 85 18 32 14 15 16 90 20 36 15.5 17 25 101 22 40 18 19 25 108 24 45 20 21 25 112 28 50 22 25 32 124 32 57 24 28 32 131 36 60 28 30 32 139 1/4” 37/64 1/4 1/4 1/2 2-3/8 5/16 45/64 5/16 9/32 1/2 2-9/16 3/8 53/64 23/64 11/32 1/2 2-11/16 7/16 61/64 27/64 3/8 1/2 2-7/8 1/2 1-5/64 15/32 15/32 1/2 3 5/8 1-21/64 37/64 9/16 1 4 3/4 1-33/64 11/16 11/16 1 4-5/16 7/8 1-45/64 51/64 13/16 1 4-5/8 1 1-61/64 29/32 15/16 1 5
REFERENCE 0307-494
Long shank T-slot cutters
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
36 listed configurations · view dimensions
cutter Dia. | Cutter width | Neck Dia. | Shank Dia. | Oal. — verify units and ordered drawing cutter Dia. Cutter width Neck Dia. Shank Dia. Oal. 1 1/8 7/16 5/8 4-15/16 1 3/16 7/16 5/8 4-15/16 1 1/4 7/16 5/8 4-15/16 1 5/16 7/16 5/8 4-15/16 1 3/8 7/16 5/8 4-15/16 1 1/2 7/16 5/8 4-15/16 1 5/8 7/16 5/8 4-15/16 1-1/4 1/8 19/32 3/4 5-1/8 1-1/4 3/16 19/32 3/4 5-1/8 1-1/4 1/4 19/32 3/4 5-1/8 1-1/4 5/16 19/32 3/4 5-1/8 1-1/4 3/8 19/32 3/4 5-1/8 1-1/4 1/2 19/32 3/4 5-1/8 1-1/4 5/8 19/32 3/4 5-1/8 1-1/2 1/8 23/32 1 5-5/16 1-1/2 3/16 23/32 1 5-5/16 1-1/2 1/4 23/32 1 5-5/16 1-1/2 5/16 23/32 1 5-5/16 1-1/2 3/8 23/32 1 5-5/16 1-1/2 1/2 23/32 1 5-5/16 1-1/2 5/8 23/32 1 5-5/16 2 3/16 25/32 1 5-11/16 2 1/4 25/32 1 5-11/16 2 5/16 25/32 1 5-11/16 2 3/8 25/32 1 5-11/16 2 1/2 25/32 1 5-11/16 2 5/8 25/32 1 5-11/16 2 3/4 25/32 1 5-11/16 2-1/2 1/4 29/32 1 6-5/8 2-1/2 5/16 29/32 1 6-5/8 2-1/2 3/8 29/32 1 6-5/8 2-1/2 1/2 29/32 1 6-5/8 2-1/2 5/8 29/32 1 6-5/8 2-1/2 3/4 29/32 1 6-5/8 2-1/2 7/8 29/32 1 6-5/8 2-1/2 1 29/32 1 6-5/8
REFERENCE 0307-495
HSS tapered end mill
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Material / construction
- M2
REFERENCE 0307-496
HSS-G conical mills
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dimensions and configurations
3 listed configurations · view dimensions
Size | Shk.Dia — verify units and ordered drawing Size Shk.Dia 25x40 8 32x50 10 45x60 10
REFERENCE 0307-497
Rotary burrs type N - Opposite Taper
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. blade | Length blade | Oal. | Dia. Shank — verify units and ordered drawing Dia. blade Length blade Oal. Dia. Shank 6 7 52 6 8 7 52 6 10 10 53 6 12 13 58 6 16 16 61 6
REFERENCE 0307-498
Turbo Cup Wheel-Alulinum Back
Select the cup profile, abrasive segment and actual mounting arrangement. Bore and threaded-interface options are separate configurations and require the approved tool drawing and marked operating limit.
- Dimensions and configurations
4 listed configurations · view dimensions
Dia. | Dia. | Arbor | Segments | Seg.No — verify units and ordered drawing Dia. Dia. Arbor Segments Seg.No 100 4” 5/8-11” · · 115 4.5” 5/8-11” · · 125 5” 5/8-11” · · 180 7” 5/8-11” · —
REFERENCE 0307-499
Vaccum brazed carbide cup wheel
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size — verify units and ordered drawing
- 100x16; 115x22.2; 125x22.2
REFERENCE 0307-500
Pilot drill for carbide grit hole saw
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- size — verify units and ordered drawing
- 8.0x141; 9.0x220
REFERENCE 0307-501
Carbide grit hole saw
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Metric — verify units and ordered drawing
- 19mm; 21; 22; 24; 25; 27; 29; 30; 32; 33; 35; 37; 38; 40; 41; 43; 44; 46; 48; 51; 52; 54; 57; 59; 60; 64; 65; 67; 70; 73; 76; 79; 83; 86; 89; 92; 95; 98; 102; 105; 108; 111; 114; 121; 127; 133; 140; 146; 152
REFERENCE 0307-502
Masonry drill with hex shank
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dia x L1 Oal — dimensional units and current drawing to confirm
- 3×70mm; 4×75; 5×85; 5.5×85; 6.5×100; 7×100; 8×120; 9×120; 10×120; 11×150; 12×150
REFERENCE 0307-503
SDS plus shank hollow core drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
21 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 25.0 72 30.0 72 32.0 72 35.0 72 40.0 72 45.0 72 50.0 72 55.0 72 60.0 72 65.0 72 68.0 72 70.0 72 75.0 72 80.0 72 85.0 72 90.0 72 95.0 72 100.0 72 105.0 72 110.0 72 120.0 72
REFERENCE 0307-504
Arbor for hollow core drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
19 listed configurations · view dimensions
Oal | Thread — verify units and ordered drawing Oal Thread 110 M16/M22 125 M16/M22 140 M16/M22 160 M16/M22 200 M16/M22 220 M16/M22 250 M16/M22 280 M16/M22 300 M16/M22 350 M16/M22 400 M16/M22 430 M16/M22 450 M16/M22 500 M16/M22 530 M16/M22 600 M16/M22 700 M16/M22 800 M16/M22 1000 M16/M22
REFERENCE 0307-505
Vacuum brazed diamond thread hole saw
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
5 listed configurations · view dimensions
size | size — verify units and ordered drawing size size 3.0mm 8.0 4.0 9.0 5.0 10.0 6.0 12.0 7.0 13.0
REFERENCE 0307-506
Adjustable ceramic tile keyhole saw
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- size — verify units and ordered drawing
- 24-96mm
REFERENCE 0307-507
Mortar rake
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size — verify units and ordered drawing
- 8x40; 10x40; 12x40; 8x100; 10x100; 12x100; 8x140; 10x140; 12x140
REFERENCE 0307-508
Right/left brad-point dowel drills
Blind-hole boring tools have a clamping flat and end screw.
- Diameter range
- 5–15 mm
- Shank
- 10 mm
- Rotation
- Right or left
REFERENCE 0307-509
Five-tip carbide CNC boring drills
Five carbide tips distinguish this high-speed boring direction for wood panels.
- Diameter range
- 5–40 mm
- Shank
- 10 mm
- Rotation
- Right or left
REFERENCE 0307-510
Right/left CNC blind-boring drills
A flat-and-screw fitting serves wood and laminated-panel boring.
- Diameter range
- 3–15 mm
- Shank
- 10 mm
- Rotation
- Right or left
REFERENCE 0307-511
Short screw-point wood-auger set
Induction-hardened steel, ground cutting edges and a chamfered lead-in are described.
- Pack / sizes
- 5 pieces: 6, 8, 9, 10, 12 mm
- Length
- 100 mm
- Shank
- Quick-change hex
REFERENCE 0307-512
Wood splitting threaded drill bits
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
2 listed configurations · view dimensions
Dia. | Oal. | Head length | Spiral length — verify units and ordered drawing Dia. Oal. Head length Spiral length 32 137 88 60 42 155 105 80
REFERENCE 0307-513
Countersink with single flute
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
2 listed configurations · view dimensions
Dia | Oal. — verify units and ordered drawing Dia Oal. 12 43 16 45
REFERENCE 0307-514
TCT boring bits with long shank
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
9 listed configurations · view dimensions
Dia | quick change shank | Oal. — verify units and ordered drawing Dia quick change shank Oal. 16 6.35 125 18 6.35 125 19 6.35 125 20 6.35 125 22 6.35 125 25 6.35 125 30 6.35 125 32 6.35 125 35 6.35 125 - Dimensions and configurations
9 listed configurations · view dimensions
Dia | Hex shank | Oal. — verify units and ordered drawing Dia Hex shank Oal. 1-1/4" 3/8" 152.5 1-3/8" 3/8" 152.5 1-1/2" 3/8" 152.5 1-5/8" 3/8" 152.5 1-3/4" 3/8" 152.5 1-7/8" 1/2" 152.5 2" 1/2" 152.5 2-1/8" 1/2" 152.5 2-1/4" 1/2" 152.5
REFERENCE 0307-515
HSS-G&E 3 flute TiN coated tapered drill
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Size — verify units and ordered drawing
- 2.0x12.0x100x60; 3.0x12.0x100x60; 4.0x12.0x100x60; 2.0x12.0x100x80; 3.0x12.0x100x80; 4.0x12.0x100x80
REFERENCE 0307-516
Brad point wood drill with 2 guide channels
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
13 listed configurations · view dimensions
Dia. | Oal. — verify units and ordered drawing Dia. Oal. 3 61 4 75 5 86 6 94 7 109 8 117 10 133 12 151 14 151 15 160 16 160 18 180 20 200
REFERENCE 0307-517
DIN338 HSS-G wood drill Industrial grade
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
11 listed configurations · view dimensions
Dia. | Oal. — verify units and ordered drawing Dia. Oal. 3 90 4 100 5 112 6 116 7 120 8 130 9 140 10 140 11 150 12 155 13 160
REFERENCE 0307-518
TCT - Cylinder boring bits (Carbide tipped)
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
40 listed configurations · view dimensions
Dia. | L1 Oal | shank Dia — verify units and ordered drawing Dia. L1 Oal shank Dia 15 80 7 16 80 7 17 80 7 18 80 7 19 80 7 20 80 8 21 80 8 22 80 8 23 80 8 24 80 8 25 85 8 26 85 8 27 85 8 28 85 8 29 85 8 30 85 8 32 85 8 33 85 8 34 85 8 35 85 8 36 85 8 38 85 10 40 90 10 41 90 10 42 90 10 45 90 10 48 90 10 50 90 10 53 90 10 55 90 10 60 90 10 63 90 10 65 90 10 70 90 10 75 90 10 80 90 10 85 90 10 90 105 12 95 105 12 100 105 12
REFERENCE 0307-519
Self-feed wood bits
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dia.mm — verify units and ordered drawing
- 25; 28; 32; 35; 38; 45; 51; 54; 57; 65; 76; 92; 117
REFERENCE 0307-520
Brad point wood drill quick change shank
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
8 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 3 60 4 75 5 85 6 90 7 100 8 112 9 116 10 120
REFERENCE 0307-521
Circular saw blade for wood working
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit. Metric and fractional schedules remain separate nominal directions; confirm the unit for each ordered dimension.
- Dimensions and configurations
169 listed configurations · view dimensions
Out Dia. | teeth wide | Plate thick | No. of teeth — verify units and ordered drawing Out Dia. teeth wide Plate thick No. of teeth 100 2 1.2 18 100 2.4 1.6 24 100 2.4 1.6 30 100 2.4 1.6 40 125 2.4 1.6 18 125 2.4 1.6 30 125 2.4 1.6 32 125 2.4 1.6 40 130 2.2 1.6 14 130 2.2 1.6 24 130 2.2 1.6 30 140 2.2 1.6 16 140 2.2 1.6 24 140 2.2 1.6 30 150 2.4 1.6 22 150 2.4 1.6 30 150 2.4 1.6 40 150 2.4 1.6 48 160 2.2 1.6 16 160 2.2 1.6 24 160 2.2 1.6 36 160 2.2 1.6 50 165 2.2 1.6 18 165 2.2 1.6 30 165 2.2 1.6 48 170 2.2 1.6 24 180 2.4 1.6 18 180 2.2 1.8 30 180 2.4 1.8 30 180 2.6 1.8 42 180 2.6 1.8 52 184 2.6 1.8 24 184 2.6 1.8 30 184 2.6 1.8 50 190 2.6 1.8 20 190 2.6 1.8 30 190 2.6 1.8 40 190 2.6 1.8 60 200 2.6 1.8 24 200 2.6 1.8 40 200 2.6 1.8 60 203 2.6 1.8 24 203 2.6 1.8 32 203 2.6 1.8 36 203 2.6 1.8 42 203 2.6 1.8 48 203 2.6 1.8 60 210 2.6 1.8 24 210 2.6 1.8 40 210 2.6 1.8 60 210 2.6 1.8 100 230 2.6 1.8 20 230 2.6 1.8 38 230 2.6 1.8 40 230 2.6 1.8 52 230 2.6 1.8 60 255 2.6 1.8 36 255 2.6 1.8 40 255 2.8 2 50 255 2.8 2 60 235 2.6 1.8 20 235 2.6 1.8 40 235 2.6 1.8 60 250 2.6 1.8 24 250 2.6 1.8 40 250 2.6 1.8 60 250 2.6 1.8 80 300 2.6 1.8 24 300 2.6 1.8 40 300 2.6 1.8 60 300 2.6 1.8 80 305 2.8 2 48 305 2.8 2 52 305 2.8 2 60 305 2.8 2 68 300 2.8 2 24 300 2.8 2 40 300 2.8 2 48 300 2.8 2 60 300 2.8 2 80 315 2.8 2 24 315 2.8 2 40 315 2.8 2 60 315 2.8 2 80 350 2.8 2 28 350 2.8 2 40 350 2.8 2 54 350 2.8 2 72 350 2.8 2 84 355 2.8 2 46 355 2.8 2 64 355 2.8 2 72 355 2.8 2 80 400 2.8 2 32 400 2.8 2 40 400 2.8 2 48 400 2.8 2 60 400 2.8 2 72 400 2.8 2 84 405 3.2 2.2 60 405 3.2 2.2 80 405 3.2 2.2 100 405 3.2 2.2 120 4 2 1.2 18 4 2.4 1.6 24 4 2.4 1.6 30 4 2.2 1.6 40 4 2.4 1.6 40 5 2.4 1.6 18 5 2.4 1.6 30 5 2.4 1.6 32 5 2.4 1.6 40 6 2.4 1.6 22 6 2.4 1.6 30 6 2.4 1.6 40 6 2.4 1.6 48 7 2.4 1.6 18 7 2.4 1.6 30 7 2.6 1.8 42 7 2.6 1.8 52 7-1/4 2.6 1.8 60 7-1/4 2.8 2.0 60 7-1/4 2.6 1.8 24 7-1/4 2.8 2.0 36 8 2.6 1.8 32 8 2.6 1.8 42 8 2.6 1.8 48 8 2.6 1.8 60 8-1/4 3.2 2.2 60 8-1/4 3.2 2.2 80 9 2.6 1.8 38 9 2.6 1.8 52 9 2.6 1.8 60 9 3 2.2 80 9 3.2 2.2 80 9 3 2.2 100 10 2.6 1.8 36 10 2.6 1.8 40 10 2.8 2.0 50 10 2.8 2.0 60 10 3 2.2 60 10 3 2.2 80 10 3.2 2.2 80 10 3 2.2 100 10 3.2 2.2 100 10 3 2.2 120 12 2.8 2.0 45 12 2.8 2.0 52 12 2.8 2.0 60 12 2.8 2.0 68 12 3 2.2 80 12 3 2.2 100 12 3.2 2.2 100 12 3 2.2 120 12 3.2 2.2 120 14 2.8 2.0 46 14 3 2.2 60 14 2.8 2.0 64 14 2.8 2.0 72 14 3 2.2 80 14 3.2 2.2 80 14 3 2.2 100 14 3.2 2.2 100 14 3 2.2 120 14 3.2 2.2 120 16 3.2 2.2 60 16 3.2 2.2 80 16 3.2 2.2 100 16 3.2 2.2 120
REFERENCE 0307-522
HCS brad point wood drill bits
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements. Metric and fractional schedules remain separate nominal directions; confirm the unit for each ordered dimension.
- Dimensions and configurations
45 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 3 60 4 75 5 85 6 91 7 100 8 112 9 116 10 120 11 130 12 140 13 140 14 150 15 155 16 160 18 180 19 190 20 200 21 210 22 220 23 225 24 230 25 235 26 240 28 250 6 200 8 200 10 200 12 200 6 250 8 250 10 250 4 300 5 300 6 300 7 300 8 300 9 300 10 300 12 300 13 300 14 300 6 400 8 400 10 400 12 400 - Dimensions and configurations
24 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing (alternative schedule 2) Dia. L1 Oal 1/8 2-3/8 5/32 2-15/16 3/16 3-11/32 1/4 3-9/16 9/32 3-15/16 5/16 4-3/8 11/32 4-9/16 3/8 4-3/4 7/16 5-1/8 15/32 5-1/2 1/2 5-1/2 9/16 5-15/16 19/32 6-3/32 5/8 6-5/16 11/16 7-3/32 3/4 7-15/32 13/16 7-7/8 53/64 8-9/32 7/8 8-5/8 15/16 8-7/8 1 9-1/4 1-1/32 9-1/2 1-1/8 9-7/8 1-1/4 9-7/8
REFERENCE 0307-523
Brad point wood drill made of C.V.
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
24 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 1/8 2-3/8 5/32 2-15/16 3/16 3-11/32 1/4 3-9/16 9/32 3-15/16 5/16 4-3/8 11/32 4-9/16 3/8 4-3/4 7/16 5-1/8 15/32 5-1/2 1/2 5-1/2 9/16 5-15/16 19/32 6-3/32 5/8 6-5/16 11/16 7-3/32 3/4 7-15/32 13/16 7-7/8 53/64 8-9/32 7/8 8-5/8 15/16 8-7/8 1 9-1/4 1-1/32 9-1/2 1-1/8 9-7/8 1-1/4 9-7/8
REFERENCE 0307-524
HSS brad point wood drill bits
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements. Metric and fractional schedules remain separate nominal directions; confirm the unit for each ordered dimension.
- Dimensions and configurations
22 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 3.0 60 4.0 75 5.0 85 6.0 91 7.0 100 8.0 112 9.0 116 10.0 120 11.0 130 12.0 140 13.0 140 1/8 2-3/8 5/32 2-15/16 3/16 3-11/32 1/4 3-9/16 9/32 3-15/16 5/16 4-3/8 11/32 4-9/16 3/8 4-3/4 1/2 5-1/8 15/32 5-1/2 1/2 5-1/2
REFERENCE 0307-525
Bell hangers drill (wood drill with A lead hole on the flute)
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements. Metric and fractional schedules remain separate nominal directions; confirm the unit for each ordered dimension.
- Dimensions and configurations
24 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 6.0 400 8.0 400 10.0 400 12.0 400 6.0 450 8.0 450 10.0 450 12.0 450 6.0 600 8.0 600 10.0 600 12.0 600 1/4 16” 5/16 16” 3/8 16” 1/2 16” 1/4 18” 5/16 18” 3/8 18” 1/2 18” 1/4 24” 5/16 24” 3/8 24” 1/2 24”
REFERENCE 0307-526
Adjustable wood drill bit
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dia. — verify units and ordered drawing
- From 15-25mm 1pc; From 15-25/25-45mm 2pc; From 25-45/45-75mm 2pc
REFERENCE 0307-527
Adjustable circle hole cutter
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dia. — verify units and ordered drawing
- 30-120mm; 30-130mm; 30-200mm; 40-120mm; 40-150mm; 40-200mm; 40-300mm
REFERENCE 0307-528
Crown head saw drill with five cutter
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Dimensions and configurations
17 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 3.0 60 4.0 75 5.0 85 6.0 91 7.0 100 8.0 112 9.0 116 10.0 120 11.0 130 12.0 140 13.0 140 14.0 150 15.0 155 16.0 160 18.0 180 19.0 190 20.0 200
REFERENCE 0307-529
Mortise bits
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- 40Cr; 60#; confirm availability for each size
- Dimensions and configurations
11 listed configurations · view dimensions
Dia. | mm | L1 Oal | L2 Flute — verify units and ordered drawing Dia. mm L1 Oal L2 Flute 1/4” 6.35 220 138 5/16 8 220 138 3/8 9.5 220 138 7/16 11 220 138 1/2 12.7 220 138 9/16 14 220 138 5/8 16 220 138 11/16 17.5 220 138 3/4 19 220 138 7/8 22.2 220 138 1 25.4 220 138
REFERENCE 0307-530
Form work drill with SDS shank
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
24 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 8.0 400 8.0 600 10.0 400 10.0 600 12.0 400 12.0 600 14.0 400 14.0 600 16.0 400 16.0 600 18.0 400 18.0 600 20.0 400 20.0 600 22.0 400 22.0 600 24.0 400 24.0 600 26.0 400 26.0 600 28.0 400 28.0 600 30.0 400 30.0 600
REFERENCE 0307-531
Form work drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
55 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 6.0 400 6.0 600 6.0 800 6.0 1000 8.0 400 8.0 600 8.0 800 8.0 1000 10.0 400 10.0 600 10.0 800 10.0 1000 12.0 400 12.0 600 12.0 800 12.0 1000 13.0 400 13.0 600 13.0 800 13.0 1000 14.0 400 14.0 600 14.0 800 14.0 1000 16.0 400 16.0 600 16.0 800 16.0 1000 18.0 400 18.0 600 18.0 1000 20.0 400 20.0 600 20.0 800 20.0 1000 22.0 400 22.0 600 22.0 800 22.0 1000 24.0 400 24.0 600 24.0 800 24.0 1000 26.0 400 26.0 600 26.0 800 26.0 1000 28.0 400 28.0 600 28.0 800 28.0 1000 30.0 400 30.0 600 30.0 800 30.0 1000
REFERENCE 0307-532
DIN1052 Auger bits (Lewis wood beam drill)
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- TiN coated; SDS shank TiN coated; Quick change shank; Quick change shank TiN coated; confirm availability for each size
- Dimensions and configurations
81 listed configurations · view dimensions
Unlabelled dimension | Unlabelled dimension — verify units and ordered drawing Unlabelled dimension Unlabelled dimension 6.0 105 8.0 105 10.0 105 11.0 105 12.0 105 13.0 105 14.0 105 15.0 105 16.0 105 17.0 105 18.0 105 19.0 105 20.0 105 21.0 105 22.0 105 23.0 105 24.0 105 25.0 105 26.0 105 28.0 105 30.0 105 32.0 105 34.0 105 35.0 105 36.0 105 38.0 105 40.0 105 6.0 230 8.0 230 10.0 230 11.0 230 12.0 230 13.0 230 14.0 230 15.0 230 16.0 230 17.0 230 18.0 230 19.0 230 20.0 230 21.0 230 22.0 230 23.0 230 24.0 230 25.0 230 26.0 230 28.0 230 30.0 230 32.0 230 34.0 230 35.0 230 36.0 230 38.0 230 40.0 230 6.0 460 8.0 460 10.0 460 11.0 460 12.0 460 13.0 460 14.0 460 15.0 460 16.0 460 17.0 460 18.0 460 19.0 460 20.0 460 21.0 460 22.0 460 23.0 460 24.0 460 25.0 460 26.0 460 28.0 460 30.0 460 32.0 460 34.0 460 35.0 460 36.0 460 38.0 460 40.0 460
REFERENCE 0307-533
Hollow center flute auger bits German type with hex shank
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
12 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 6.0 200 7.0 200 8.0 200 10.0 200 12.0 200 14.0 200 16.0 200 18.0 200 20.0 200 22.0 200 24.0 200 26.0 200
REFERENCE 0307-534
Solid center flute auger bits German type with SDS shank
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
24 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 6.0 230 7.0 230 8.0 230 10.0 230 12.0 230 14.0 230 16.0 230 18.0 230 20.0 230 22.0 230 24.0 230 26.0 230 6.0 460 7.0 460 8.0 460 10.0 460 12.0 460 14.0 460 16.0 460 18.0 460 20.0 460 22.0 460 24.0 460 26.0 460
REFERENCE 0307-535
Double twist auger bits
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
22 listed configurations · view dimensions
Dia. | L1 Oal — verify units and ordered drawing Dia. L1 Oal 6.0 200 8.0 200 10.0 200 11.0 200 12.0 200 13.0 200 14.0 200 15.0 200 16.0 200 17.0 200 18.0 200 19.0 200 20.0 200 21.0 200 22.0 200 23.0 200 24.0 200 25.0 200 26.0 200 28.0 200 30.0 200 32.0 200
REFERENCE 0307-536
Quick change shank auger bits
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
8 listed configurations · view dimensions
Dia. | L1 Oal — dimensional units and current drawing to confirm Dia. L1 Oal — dimensional units and current drawing to confirm 3.0 90 3.0 120 4.0 90 4.0 120 5.0 90 5.0 120 6.0 90 8.0 90
REFERENCE 0307-537
Screw auger bits long shank
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
5 listed configurations · view dimensions
Dia. | L1 Oal | L2 Flute — verify units and ordered drawing Dia. L1 Oal L2 Flute 13.0 520 240 16.0 560 270 19.0 590 300 22.0 590 300 25.0 600 310
REFERENCE 0307-538
Spade drill
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item. Metric and fractional schedules remain separate nominal directions; confirm the unit for each ordered dimension.
- Construction / finish choices
- TiN coated; SDS shank TiN coated; Quick change shank; Quick change shank TiN coated; confirm availability for each size
- Dimensions and configurations
24 listed configurations · view dimensions
Unlabelled dimension | Unlabelled dimension — verify units and ordered drawing Unlabelled dimension Unlabelled dimension 6.0 150 8.0 150 10.0 150 11.0 150 12.0 150 13.0 150 14.0 150 15.0 150 16.0 150 17.0 150 18.0 150 19.0 150 20.0 150 22.0 150 24.0 150 25.0 150 26.0 150 28.0 150 30.0 150 32.0 150 35.0 150 38.0 150 40.0 150 Dia. L1 Oal - Dimensions and configurations
23 listed configurations · view dimensions
Unlabelled dimension | Unlabelled dimension — verify units and ordered drawing (alternative schedule 2) Unlabelled dimension Unlabelled dimension 1/4 6” 5/16 6 3/8 6 7/16 6 15/32 6 1/2 6 9/16 6 19/32 6 5/8 6 21/32 6 11/16 6 3/4 6 25/32 6 7/8 6 15/16 6 1 6 1-1/32 6 1-7/64 6 1-3/16 6 1-17/64 6 1-3/8 6 1-1/2 6 1-9/16 6
REFERENCE 0307-539
Handy tapered reamer
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
5 listed configurations · view dimensions
size | size — verify units and ordered drawing size size 12 15/32” 13 1/2 16 5/8 19 3/4 22 7/8
REFERENCE 0307-540
Forstner bits (As per DIN7483-G)
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements. Confirm the cutting, overall and shank dimensions individually; differently labelled subsections require a current drawing.
- Dimensions and configurations
28 listed configurations · view dimensions
Dia. | shank | L1 Oal. — verify units and ordered drawing Dia. shank L1 Oal. 6.0 6x30 90 8.0 6x30 90 10.0 8x30 90 11.0 8x30 90 12.0 8x30 90 14.0 8x30 90 15.0 8x30 90 16.0 8x30 90 18.0 8x30 90 20.0 8x30 90 21.0 8x30 90 22.0 8x30 90 24.0 8x30 90 25.0 8x30 90 26.0 8x30 90 28.0 8x30 90 30.0 8x30 90 32.0 10x30 90 34.0 10x30 90 35.0 10x30 90 36.0 10x30 90 38.0 10x30 90 40.0 10x30 90 42.0 10x30 90 44.0 10x30 90 45.0 10x30 90 50.0 10x30 90 55.0 10x30 90 - Dimensions and configurations
35 listed configurations · view dimensions
Dia. | shank | Unassigned D×L2 reference — verify units and ordered drawing Dia. shank Unassigned D×L2 reference 1/4 3/8 3-5/32 3/8 3/8 3-5/32 1/2 3/8 3-5/32 5/8 3/8 3-5/32 3/4 3/8 3-5/32 7/8 3/8 3-5/32 1 3/8 3-5/32 1-1/8 3/8 3-5/32 1-1/4 3/8 3-5/32 1-3/8 3/8 3-5/32 1-1/2 3/8 3-5/32 1-5/8 3/8 3-5/32 1-3/4 3/8 3-5/32 1-7/8 3/8 3-5/32 2 3/8 3-5/32 2-1/8 3/8 3-5/32 2-1/4 1/2 6-1/4 2-5/16 1/2 6-1/4 2-3/8 1/2 6-1/4 2-1/2 1/2 6-1/4 2-5/8 1/2 6-1/4 2-3/4 1/2 6-1/4 2-7/8 1/2 6-1/4 3 1/2 6-1/4 3-1/8 1/2 6-1/4 3-1/4 1/2 6-1/4 3-3/8 1/2 6-1/4 3-1/2 1/2 6-1/4 3-5/8 1/2 6-1/4 3-3/4 1/2 6-1/4 3-7/8 1/2 6-1/4 4 1/2 6-1/4 4-1/8 1/2 6-1/4 4-1/4 1/2 6-1/4 4-1/2 1/2 6-1/4
REFERENCE 0307-541
Cylinder boring bits similar DIN7483-G
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
24 listed configurations · view dimensions
Dia. | shank | L1 Oal. — verify units and ordered drawing Dia. shank L1 Oal. 8 8x30 90 10 8x30 90 12 8x30 90 14 8x30 90 15 8x30 90 16 8x30 90 18 8x30 90 20 8x30 90 22 8x30 90 24 8x30 90 25 8x30 90 26 8x30 90 28 8x30 90 30 8x30 90 32 10x30 90 34 10x30 90 35 10x30 90 36 10x30 90 38 10x30 90 40 10x30 90 42 10x30 90 45 10x30 90 48 10x30 90 50 10x30 90
REFERENCE 0307-542
Hinge boring bits
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dia — verify units and ordered drawing
- 26; 30; 35
REFERENCE 0307-543
Hex shank forstner bits
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements. Confirm the cutting, overall and shank dimensions individually; differently labelled subsections require a current drawing.
- Dimensions and configurations
14 listed configurations · view dimensions
Dia. | shank | L1 Oal. — verify units and ordered drawing Dia. shank L1 Oal. 6.0 6x30 90 8.0 6x30 90 10.0 8x30 90 11.0 8x30 90 12.0 8x30 90 14.0 8x30 90 15.0 8x30 90 16.0 8x30 90 18.0 8x30 90 20.0 8x30 90 21.0 8x30 90 22.0 8x30 90 24.0 8x30 90 25.0 8x30 90 - Dimensions and configurations
7 listed configurations · view dimensions
Dia. | shank | Unassigned D×L2 reference — verify units and ordered drawing Dia. shank Unassigned D×L2 reference 1/4” 3/8” 3-5/32” 3/8 3/8 3-5/32” 1/2 3/8 3-5/32” 5/8 3/8 3-5/32” 3/4 3/8 3-5/32” 7/8 3/8 3-5/32” 1 3/8 3-5/32”
REFERENCE 0307-544
Precision forstner bits
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
28 listed configurations · view dimensions
Dia. | shank | L1 Oal. — verify units and ordered drawing Dia. shank L1 Oal. 6.0 6x30 90 8.0 6x30 90 10.0 8x30 90 11.0 8x30 90 12.0 8x30 90 14.0 8x30 90 15.0 8x30 90 16.0 8x30 90 18.0 8x30 90 20.0 8x30 90 21.0 8x30 90 22.0 8x30 90 24.0 8x30 90 25.0 8x30 90 26.0 8x30 90 28.0 8x30 90 30.0 8x30 90 32.0 10x30 90 34.0 10x30 90 35.0 10x30 90 36.0 10x30 90 38.0 10x30 90 40.0 10x30 90 42.0 10x30 90 44.0 10x30 90 45.0 10x30 90 50.0 10x30 90 55.0 10x30 90
REFERENCE 0307-545
Long forstner bits with tooth
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Metric — verify units and ordered drawing
- 10x9.5x150; 12x9.5x150; 15x9.5x150; 16x9.5x150; 20x9.5x150; 22x9.5x150; 25x9.5x150; 27x9.5x150; 30x9.5x150; 35x9.5x150; 40x9.5x150; 43x9.5x150; 45x9.5x150; 50x9.5x150; 60x13.0x160; 80x13.0x160; 83x13.0x160
REFERENCE 0307-546
Shell drill countersinks
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
9 listed configurations · view dimensions
Dia. | For drill — dimensional units and current drawing to confirm Dia. For drill — dimensional units and current drawing to confirm 12.0 3.0 12.0 4.0 12.0 5.0 12.0 6.0 16.0 6.0 16.0 7.0 16.0 8.0 16.0 9.0 16.0 10.0
REFERENCE 0307-547
Metric countersinks with matching shank diameters
Countersink and shank sizes must remain paired for the holder.
- Diameter / shank reference
- 10 / 3; 13 / 4; 16 / 5; 20 / 6, metric dimensions to confirm
- Standard reference
- DIN 6446B
REFERENCE 0307-548
HSS taper drills with countersink
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dia — dimensional units and current drawing to confirm
- 3.0; 3.5; 4.0; 4.5; 5.0; 5.5; 6.0
REFERENCE 0307-549
Hinge drill
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dia — dimensional units and current drawing to confirm
- 2.0mm; 2.5; 2.8; 3.2
REFERENCE 0307-550
Carbide inserted brad point wood drill (Dowel drill)
Select the cutting geometry, material and coating for the workpiece and machine. Review the drawing, holder, cooling arrangement and cutting conditions together.
- Dia — dimensional units and current drawing to confirm
- 3.2mm; 4.0; 4.8; 5.5; 6.5; 7.0; 8.0; 9.0; 10.0; 10.5; 11.0; 12.0; 13.0
REFERENCE 0307-551
4-flute wood bits
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Construction / finish choices
- HCS; HSS; confirm availability for each size
- Dimensions and configurations
23 listed configurations · view dimensions
Dia. | Oal — verify units and ordered drawing Dia. Oal 10 120 11 120 12 120 13 120 14 120 15 120 16 120 18 120 19 120 20 120 21 120 22 120 24 120 25 120 26 120 28 120 30 120 32 120 34 120 35 120 36 120 38 120 40 120
REFERENCE 0307-552
Plug cutter
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
19 listed configurations · view dimensions
Dia | L1 Oal — dimensional units and current drawing to confirm Dia L1 Oal — dimensional units and current drawing to confirm 6mm 45mm 9.5 45 12.5 45 16.0 45 9.5 110 12.5 110 16.0 110 19.0 110 22.0 110 25.0 110 32.0 110 38.0 110 45.0 110 50.0 110 65.0 110 75.0 110 90.0 110 19.0 45 22.5 45
REFERENCE 0307-553
Tenon dowel&plug cutter
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
16 listed configurations · view dimensions
mm | mm — verify units and ordered drawing mm mm 9.5 140 12.5 140 16.0 140 19.0 140 22.0 140 25.0 140 28.5 140 32.0 160 35.0 160 38.0 160 45.0 160 48.0 160 50.0 160 54.0 160 57.0 160 60.0 160
REFERENCE 0307-554
Dowel pin
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Dimensions and configurations
6 listed configurations · view dimensions
size | Qty/bag | Unlabelled dimension — verify units and ordered drawing size Qty/bag Unlabelled dimension 6x30mm 200pc for board thickness from 12-14mm 6x30 50pc for board thickness from 12-14mm 8x40 150pc for board thickness from 15-18mm 8x40 40pc for board thickness from 15-18mm 10x40 120pc for board thickness from 19-30mm 10x40 30pc for board thickness from 19-30mm
REFERENCE 0307-555
Silicon-carbide cleaning-disc pack
A fibre-mesh backing, resin elastomer and silicon-carbide grain form a compliant stripping structure.
- Pack
- 5 pieces
- Diameter / thickness / bore
- 4.5 / 3/5 / 7/8 inch
- Grit
- 46
- Stated maximum speed
- 13,300 rpm; supplied marking governs
- Diameter | thickness | bore (inch)
- 4.5 | 3/5 | 7/8; confirm the exact wheel and marking
REFERENCE 0307-556
Bevel brush with M14 nut crimped wire
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 100; 115
REFERENCE 0307-557
Wheel brush with φ 6 shaft crimped wire
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 50; 60; 80
REFERENCE 0307-558
Cup brush with M14 nut twisted wire
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 60; 80; 100; 120
REFERENCE 0307-559
Cup brush with M14 nut crimped wire
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 60; 80; 100; 120
REFERENCE 0307-560
Cup brush with φ 6 shaft crimped
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 50; 60; 80
REFERENCE 0307-561
Cup brush with φ6 shaft twisted wire
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size — verify units and ordered drawing
- 60; 80
REFERENCE 0307-562
Adhesive resin bonded sanding paper
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dia. — verify units and ordered drawing
- 115mm; 125; 178
REFERENCE 0307-563
Coated abrasive sanding disc with hole
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dia. — verify units and ordered drawing
- 115mm; 125; 150
REFERENCE 0307-564
Abrasive sheet for Delta sander
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dia. — verify units and ordered drawing
- 95mm; 105; 120
REFERENCE 0307-565
Sand paper sheets
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Width × Length — dimensional units and current drawing to confirm
- 93×230mm; 115×280
REFERENCE 0307-566
Rectangular sanding sponges, thick compact form
A compact rectangular sponge direction for hand finishing.
- Dimensions
- 100 × 70 × 25 mm
REFERENCE 0307-567
Thin sanding sponges
A thin rectangular sponge direction for hand finishing.
- Dimensions
- 140 × 115 × 5 mm
REFERENCE 0307-568
Wide rectangular sanding sponges
A wide rectangular sponge direction for hand finishing.
- Dimensions
- 125 × 90 × 25 mm
REFERENCE 0307-569
Narrow rectangular sanding sponges
A narrow rectangular sponge direction for hand finishing.
- Dimensions
- 125 × 75 × 25 mm
REFERENCE 0307-570
Medium-thickness sanding sponges
A medium-thickness rectangular sponge direction for hand finishing.
- Dimensions
- 125 × 100 × 12 mm
REFERENCE 0307-571
Diamond hand pad
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
8 listed configurations · view dimensions
size | grit | color | bondtype — verify units and ordered drawing size grit color bondtype 90x55 60 green electroplated 90x55 120 black electroplated 90x55 200 red electroplated 90x55 400 yellow electroplated 90x55 800 white resin 90x55 1800 blue resin 90x55 3500 orange resin 90x55 7000 brown resin
REFERENCE 0307-572
Dry sand paper sheet for wood
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Width × Over long — dimensional units and current drawing to confirm
- 230×280mm
REFERENCE 0307-573
Water proof abrasive paper sheets
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Width × Length — dimensional units and current drawing to confirm
- 230×280mm
REFERENCE 0307-574
Abrasive cloth sheets
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Width × Length — dimensional units and current drawing to confirm
- 230×280mm
REFERENCE 0307-575
Aluminium oxide roll-shaped abrasive cloth
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
6 listed configurations · view dimensions
Width | Length — verify units and ordered drawing Width Length 115mm 10m 115mm 30m 115mm 50m 150mm 10m 150mm 30m 150mm 50m
REFERENCE 0307-576
Drum sleeve
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Width × Over long — verify units and ordered drawing
- 1/2×4-1/2”; 3/4×4-1/2; 1×4-1/2; 1-1/2×4-1/2; 2×4-1/2; 3×4-1/2
REFERENCE 0307-577
Drum sander
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- size — verify units and ordered drawing
- 1/4”×1/2”×1/8”; 1/4”×1/2”×1/4”; 3/8”×1/2”×1/8”; 3/8”×1/2”×1/4”; 1/2”×1/2”×1/8”; 1/2”×1/2”×1/4”; 3/4”×1”×1/8”; 3/4”×1”×1/4”; 1”×1”×1/8”; 1”×1”×1/4”; 1-1/2”×1-1/2”×1/4”; 2”×1/2”×1/4”; 1/2”×2”×1/8”; 1/2”×2”×1/4”; 3/4”×2”×1/8”; 3/4”×2”×1/4”; 1”×2”×1/4”; 1-1/2”×2”×1/4”
REFERENCE 0307-578
Sanding belts
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- size — dimensional units and current drawing to confirm
- 13×457; 40×305; 50×686; 60×400; 63×410; 65×410; 75×457; 75×480; 75×510; 75×533; 75×610; 100×560; 100×610; 100×620; 100×915; 102×552; 105×620; 150×1220
REFERENCE 0307-579
Screen mesh
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Length×Width — verify units and ordered drawing
- 110×270mm; 115×280mm; 125×280mm
REFERENCE 0307-580
hook-and-loop silicon mesh for dry wall
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dia. — verify units and ordered drawing
- 115mm; 125mm; 180mm; 225mm
REFERENCE 0307-581
Felling-axe
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Weight
- 1600g Lengh of handle: 80cm made of White Birch
- Length
- 80cm made of White Birch
- Construction
- White-birch handle
REFERENCE 0307-582
Screwdriver
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-583
Plastic hand saw guide
Match the blade or cutter to the material, machine interface and cut. Confirm tooth or segment geometry, bore, operating direction and marked operating limit.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-584
Folding knife
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-585
Claw hammer-1
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Construction
- TPR/plastic handle
REFERENCE 0307-586
Claw hammer British type
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 21mm 23mm 25mm 27mm 29mm
- Construction
- TPR/plastic handle
REFERENCE 0307-587
Machinist hammer German type
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 100G 200G 300G 400G 500G 600G 800G 1KG 1.5KG 2KG
- Construction
- TPR/plastic handle
REFERENCE 0307-588
Bush hammer German type
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 800G 1KG 1.25KG 1.5KG 2KG
REFERENCE 0307-589
Round head hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-590
Round head hammer -2
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-591
Pane hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 200G 300G 500G
REFERENCE 0307-592
Rubber hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-593
Machinist hammer French type
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 20mm 25mm 28mm 30mm 35mm 40mm 45mm
REFERENCE 0307-594
Joiner's hammer French type
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 20mm 22mm 25mm 28mm 30mm
REFERENCE 0307-595
Cross pein hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 20mm 22mm 25mm
REFERENCE 0307-596
Roofing hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 600G
REFERENCE 0307-597
Sledge hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 2LB 3LB 4LB
REFERENCE 0307-598
Mason's hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 600G
REFERENCE 0307-599
Claw hammer British type
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 21mm 23mm 25mm 27mm 29mm
REFERENCE 0307-600
Claw hammer British type
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 21mm 23mm
REFERENCE 0307-601
Claw hammer British type
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 21mm
REFERENCE 0307-602
Bricklayer's hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 600G
REFERENCE 0307-603
Claw hammer French type
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 600G
REFERENCE 0307-604
Claw hammer Italian type
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 300G 400G 500G
REFERENCE 0307-605
Garden hoe
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 600G
REFERENCE 0307-606
Roofing hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 600G
- Construction
- Iron handle
REFERENCE 0307-607
Sectorial axe
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 600G
- Construction
- Iron handle
REFERENCE 0307-608
Stone hammer German type
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size options
- 800G 1000G 1250G 1500G 2000G
REFERENCE 0307-609
Stone hammer German type
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size options
- 800G 1000G 1250G 1500G 2000G
- Construction
- Wood handle; Bleached wood handle
REFERENCE 0307-610
Stone hammer
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size options
- 2LB 2.5LB 3LB 4LB
- Construction
- One-piece construction
REFERENCE 0307-611
Stone hammer America type
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size options
- 2LB 2.5LB 3LB 4LB
- Construction
- Glass-fibre handle
REFERENCE 0307-612
Magnetic bits holder
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Length — verify units and ordered drawing
- 50mm; 60; 75; 100; 150; 200; 300
REFERENCE 0307-613
Quick release bit holder
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- type — verify units and ordered drawing
- upward; downward
REFERENCE 0307-614
Copper plating bit holder
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- type — verify units and ordered drawing
- quick change shank; SDS plus
REFERENCE 0307-615
Morse taper drill chuck arbors with tang
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
56 listed configurations · view dimensions
Taper-interface designation | L | D — verify units and ordered drawing Taper-interface designation L D MS1-B10 84 10.094 MS1-B12 88 12.065 MS1-B16 94 15.733 MS1-B18 100 17.78 MS1-JT0 80 6.35 MS1-JT1 85 9.754 MS1-JT2 91 14.199 MS1-JT3 99 20.599 MS1-JT6 94 17.17 MS1-JT33 94 15.85 MS2-B10 97 10.094 MS2-B12 101 12.065 MS2-B16 107 15.733 MS2-B18 115 17.78 MS2-B22 124 21.793 MS2-JT0 93 6.35 MS2-JT1 98 9.754 MS2-JT2 104 14.199 MS2-JT3 112 20.599 MS2-JT4 124 28.55 MS2-JT6 107 17.17 MS2-JT33 107 15.85 MS3-B10 116 10.094 MS3-B12 120 12.065 MS3-B16 126 15.733 MS3-B18 134 17.78 MS3-B22 143 21.793 MS3-B24 153 23.825 MS3-JT0 112 8 MS3-JT1 117 9.754 MS3-JT2 123 14.199 MS3-JT3 132 20.599 MS3-JT4 143 28.55 MS3-JT5 148 35.89 MS3-JT6 126 17.17 MS3-JT33 126 15.85 MS4-B12 145 12.065 MS4-B16 151 15.733 MS4-B18 159 17.788 MS4-B22 167 21.793 MS4-B24 177 23.825 MS4-JT2 148 14.199 MS4-JT33 157 20.599 MS4-JT4 168 28.55 MS4-JT6 151 17.17 MS4-JT33 151 15.85 MS5-B16 184 15.733 MS5-B18 192 17.78 MS5-B22 200 21.793 MS5-B24 210 23.825 MS5-JT3 190 20.599 MS5-JT4 201 28.55 MS5-JT5 206 35.89 MS5-JT6 184 17.17 MS5-JT33 184 15.85 MS6-JT6 246 17.17
REFERENCE 0307-616
Threaded drill-chuck arbors with tang
Morse-taper and threaded chuck interfaces are paired with the listed arbor geometry. Confirm the actual male/female thread, tolerance class and chuck drawing before ordering.
- Dimensions and configurations
18 listed configurations · view dimensions
MS.No.S | L | L1 | L2 | D | d | M — verify units and ordered drawing MS.No.S L L1 L2 D d M MS1 83 13.5 62 24 12.065 3/8”-24UNF MS1 85 15.5 62 24 12.065 1/2”-20UNF MS1 85 15.5 62 24 12.065 M12×1.25 MS1 88 17.5 62 27 12.065 5/8”-16UNF MS2 97 13.5 75 24 17.78 M10×1-6H MS2 97 13.5 75 24 17.78 3/8”-24UNF-2A MS2 100 15.5 75 24 17.78 M12×1.25-6H MS2 100 15.5 75 24 17.78 1/2”-20UNF-2A MS2 103 17.5 75 29 17.78 M16×1.5-6H MS2 103 17.5 75 29 17.78 5/8”-16UNF-2A MS2 103 17.5 75 29 17.78 5/8”-20UNF-2A MS2 116 13.5 75 24 17.78 M10×1-6H MS3 116 13.5 94 24 23.825 3/8”-24UNF-2A MS3 119 15.5 94 27 23.825 M12×1.25-6H MS3 119 15.5 94 27 23.825 1/2”-20UNF-2A MS3 122 17.5 94 29 23.825 M16×1.5-6H MS3 122 17.5 94 29 23.825 5/8”-16UNF-2A MS4 145 15.5 117.5 31.6 31.267 M12×1.25-6H
REFERENCE 0307-617
Morse straight to jacobs taper arbors
Match the thread form, pitch, hole type and work material. Include the holder, pilot hole and insert or extraction accessories where required.
- Dimensions and configurations
27 listed configurations · view dimensions
Morse-to-B interface | length; units to confirm Morse-to-B interface length MT1-B10 87 MT1-B12 91 MT1-B16 98 MT1-B18 106 MT2-B10 102 MT2-B12 106 MT2-B16 113 MT2-B18 121 MT2-B22 126 MT2-B24 136 MT3-B10 121 MT3-B12 125 MT3-B16 132 MT3-B18 140 MT3-B22 148 MT3-B24 158 MT4-B10 146 MT4-B12 150 MT4-B16 157 MT4-B18 165 MT4-B22 173 MT4-B24 183 MT5-B12 182 MT5-B16 189 MT5-B18 197 MT5-B22 205 MT5-B24 215 - Dimensions and configurations
27 listed configurations · view dimensions
Morse-to-Jacobs interface | length; independent schedule, units to confirm Morse-to-Jacobs interface length; independent schedule, units to confirm MT1-JT0 82 MT1-JT1 87 MT1-JT2 93 MT1-JT2(short) 92 MT1-JT33 96 MT1-JT6 96 MT2-JT3 101 MT2-JT0 97 MT2-JT1 102 MT2-JT2 108 MT2-JT2(short) 107 MT2-JT33 111 MT2-JT6 111 MT2-JT3 112 MT2-JT4 124 MT2-JT5 130 MT3-JT1 121 MT3-JT2 127 MT3-JT2(short) 126 MT3-JT33 130 MT3-JT6 130 MT3-JT3 135 MT3-JT4 147 MT3-JT5 153 MT4-JT2 152 MT4-JT2(short) 151 MT4-JT33 155 - Dimensions and configurations
23 listed configurations · view dimensions
Straight-shank size | taper designation | L | D | I; units per approved drawing Straight-shank size taper designation L D I 1/2”×2-1/2” 0 77 12.7 63.5 1/2”×2-1/2” 1 83 12.7 63.5 1/2”×2-1/2” 2 88.5 12.7 63.5 1/2”×2-1/2” 3 97 12.7 63.5 1/2”×2-1/2” 33 91.5 12.7 63.5 1/2”×2-1/2” 6 91.5 12.7 63.5 5/8”×2-1/2” 1 83 15.875 63.5 5/8”×2-1/2” 2 88.5 15.875 63.5 5/8”×2-1/2” 3 97 15.875 63.5 5/8”×2-1/2” 33 91.5 15.875 63.5 5/8”×2-1/2” 4 108.5 15.875 63.5 5/8”×2-1/2” 6 91.5 15.875 63.5 3/4”×3” 1 95.5 19.05 76.2 3/4”×3” 2 101 19.05 76.2 3/4”×3” 3 110 19.05 76.2 3/4”×3” 33 104.5 19.05 76.2 3/4”×3” 4 121 19.05 76.2 3/4”×3” 6 104.5 19.05 76.2 1”×3” 2 101 25.4 76.2 1”×3” 3 110 25.4 76.2 1”×3” 33 104.5 25.4 76.2 1”×3” 4 121 25.4 76.2 1”×3” 6 104.5 25.4 76.2
REFERENCE 0307-618
Mason's hammer Australian type
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 600G
- Construction
- TPR/plastic handle
REFERENCE 0307-619
Stone hammer Spanish type
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Size options
- 700G 800G 1000G 1250G 1400G 1500G
- Construction
- Wood handle
REFERENCE 0307-620
Sledge hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 2LB 3LB 4LB 6LB 8LB 10LB 12LB
REFERENCE 0307-621
Sledge cross peen hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 2LB 2.5LB 3LB 4LB
- Construction
- TPR/plastic handle
REFERENCE 0307-622
Ball peen hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Construction
- TPR/plastic handle
REFERENCE 0307-623
Moon hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 300G
- Construction
- Wood handle
REFERENCE 0307-624
Spring handle chipping hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 200G 300G 500G
- Construction
- Spring-metal handle
REFERENCE 0307-625
Spring handle safety hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 300G 400G
REFERENCE 0307-626
Hoof testing hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 200G 300G
REFERENCE 0307-627
Rubber hammer
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Construction
- TPR/plastic handle
REFERENCE 0307-628
Shovel w/o handle
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- A=270mm B=270mm C=400mm
REFERENCE 0307-629
Shovel w/o handle
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- A=280mm B=290mm C=350mm
REFERENCE 0307-630
Shovel w/o handle
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- A=280mm B=280mm C=350mm
REFERENCE 0307-631
Shovel w/o handle
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- A=275mm B=390mm C=515mm
REFERENCE 0307-632
Shovel w/o handle
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- A=240mm B=300mm C=420mm
REFERENCE 0307-633
Shovel
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- A=245mm B=310mm C=1000mm
REFERENCE 0307-634
Shovel
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- A=190mm B=310mm C=1000mm
REFERENCE 0307-635
Shovel
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- A=280mm B=330mm C=1000mm
REFERENCE 0307-636
Crowbar
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 14x100mm 16x300mm 18x300mm
REFERENCE 0307-637
24pcs comb. drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- drill TiN coated: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5mm Nut setter: 5, 6, 8, 10 50mm bits: PH1, 2, 3 H1, 2, 3 SL 5, 6
- type — verify units and ordered drawing
- plastic case
REFERENCE 0307-638
17pcs comb. drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- HSS twist drill 1.5,2,2.5,3,3.2,3.5,4,4.5,5,5.5,6mm masonry drill 3,4,5,6,8,10mm
- type — verify units and ordered drawing
- plastic case
REFERENCE 0307-639
16pcs comb. drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- HSS twist drill 2, 2.5, 3, 4, 5, 6mm masonry drill 4, 5, 6, 7, 8mm wood drill 3, 4, 5, 6, 8mm
- type — verify units and ordered drawing
- plastic case
REFERENCE 0307-640
15pcs HSS twist drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 2 x 1.5 mm, 2 x 2.0 mm, 2 x 2.5 mm 1 x 3.0 mm, 1 x 3.2 mm, 1 x 3.5 mm 1 x 4.0 mm, 1 x 4.5 mm, 1 x 5.0 mm 1 x 6.0 mm, 1 x 8.0 mm, 1 x 10.0 mm
- type — verify units and ordered drawing
- plastic case
REFERENCE 0307-641
15pcs masonry drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 3 x 3.0 mm, 3 x 4.0 mm, 3 x 5.0 mm, 2 x 6.0 mm, 2 x 8.0 mm, 2 x 10.0 mm
- type — verify units and ordered drawing
- plastic case
REFERENCE 0307-642
9pcs comb. drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- HSS / masonry / wood 5-6-8mm
- type — verify units and ordered drawing
- plastic case
REFERENCE 0307-643
10pcs damaged bolts&nut extractor
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 1# - 10#
- type — verify units and ordered drawing
- 10pcs
REFERENCE 0307-644
Mixed electrical-maintenance hand-tool assortment
Pliers, wire stripper, tape and screwdrivers form this maintenance direction. No insulation or live-working approval is offered without item-specific evidence.
- type — verify units and ordered drawing
- 11pcs
REFERENCE 0307-645
10pcs hex key wrench
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8, 10 mm; key lengths and holder arrangement to confirm
- type — verify units and ordered drawing
- 10pcs
REFERENCE 0307-646
8pcs CV-impact sockets
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 26,27,29,30,32,35,36,38mm
- type — verify units and ordered drawing
- 8pcs
REFERENCE 0307-647
62pcs bits set
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- PH:#0x2,#1x2,#2x4,#3x2 PZ:#0x2,#1x2,#2x4,#3x2 Hex:2x2,3x2,4x2,5x2,6x2 Slotted: 3x2,4x2,5x2,6x2,7 T:10,15x2,20x2,25x2,27,30,40 TT :10,15x2,20x2,25x2,27,30,40 1 pc quick release bit holder 1 pc magnetic bit holder 1 pc 1/4" socket adapter
- type — verify units and ordered drawing
- 62pcs
REFERENCE 0307-648
Bits set assortment
Coordinate the listed components and case layout for the selected assortment. Final component quantities and total pack count require an approved bill of materials.
- Size options
- 9pc 1/4"DR socket:5、6、7、8、9、10、11、12、13mm 34pc 1/4"bit: PH1-2-3-4; PZ1-2-3-4; HEX 2-2.5-3-4-5-6； SLD3-4-4.5-5-5.5-6; SQ0-1-2-3; U#4-6-8-10 six-lobe 8-10-15-20-25-27-30 1pc ratchet screwdriver 1pc 1/4"-1/4" socket adaptor
- type — verify units and ordered drawing
- 46pcs
REFERENCE 0307-649
32pcs bits set
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 1/4"x25mm bit set PH0. PH1 PH2 PH3 PZ0 PZ1 PZ2 PZ3 SL4、5、6、7 H3 H4 H5 H6 T10、15、20、25、27, 30, 40 six-lobe T10、15、20、25、27, 30, 40 six-lobe w/pin 1/4" socket adaptor and bit holder with magnetic
- type — verify units and ordered drawing
- 32pcs
REFERENCE 0307-650
Bits set assortment
Coordinate the listed components and case layout for the selected assortment. Final component quantities and total pack count require an approved bill of materials.
- Size options
- 30pcs 25mm bits CRV T10x2, T15x2, T20x2, T25x2, T30x2, T40x2, PZ1x2, PZ2x3, PZ3x1, PH1x2, PH2x2, PH3x1, H3, H4, H5, H6, SL4.5, SL5.5, SL6.5 1pc bit holder 60mm long
- type — verify units and ordered drawing
- 31pcs
REFERENCE 0307-651
Bits set assortment
Coordinate the listed components and case layout for the selected assortment. Final component quantities and total pack count require an approved bill of materials.
- Size options
- 1/4"DR socket: 4,4.5,5,5.5,6,7,8,9,10,11,12,13,14 ph:1,2,3 pz:1,2,3 sld:4,5,6 hex:4,5,6 1pcs ratchet handle 1pcs bit coupler 1pcs extension bar 2"
- type — verify units and ordered drawing
- 28pcs
REFERENCE 0307-652
25pcs socket&bits set
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 12pcs 6pt.metric sockets: 4,4.5,5,5.5,6,7,8,9,10,11,12,13mm 12pc socket bits: PHILLIPS PH1,PH2; SLOTTED 3,4,5,6,7mm HEX 3,4,5,6,8mm 1pc accessory: quick release ratchet handle
- type — verify units and ordered drawing
- 25pcs
REFERENCE 0307-653
22pcs bits set
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- PH:#1,#2,#3 PZ:#1,#2,#3 HEX:3,4,5,6 slotted:4,5 TT:10,15,20,25,30 magnetic nut6,8,10 1pc quick release bit holder 1pc 1/4"socket adaptor
- type — verify units and ordered drawing
- 22pcs
REFERENCE 0307-654
15pcs bits set
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- HSS drill hex: 2,2.5,3,4mm 25mm bits: PH1-2,PZ1-2,SL3-4 Nut setter: 6,8,10,13mm 1/4”x60mm bits holder
- type — verify units and ordered drawing
- 15pcs
REFERENCE 0307-655
11pcs bits set
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- PH:1,2,3 PZ:1,2,3 T:20,25,30,40 75mm bit holder
- type — verify units and ordered drawing
- 11pcs TiN
REFERENCE 0307-656
39pcs tap and die
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 16pc tap M3-M10 1pc tap 1/8 npt - 27 16pc die M3-M10 1pc tap 1/8 npt - 27 1pc tap wrench M3-M12 1pc die holder Dia. 25 x 9 1pc screwdriver slot 3 x 40 1pc T-tap wrench M3 - 6 1pc screw pitch gauge 0.5 - 1.75
- Type — verify units and ordered drawing
- plastic case
REFERENCE 0307-657
14pcs tap and die
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 4pc hss twist drill 2.5-5.0 4pc die M3-M6 4pc tap M3-M6 1pc tap wrench 0# M1-M8 1pc die holder Dia. 20 x 7 with 1 Screw
- Type — verify units and ordered drawing
- plastic case
REFERENCE 0307-658
9pcs tap
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 4pc hss twist drill 2.5-6.0 4pc screw extractor 1#-4# 1pc tap Wrench 1# M1-M10
- Type — verify units and ordered drawing
- plastic case
REFERENCE 0307-659
3pcs tap
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- M3-M20
- Type — verify units and ordered drawing
- plastic box
REFERENCE 0307-660
5pcs HSS rotary burrs
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 6mm shank
- Type — verify units and ordered drawing
- 5pcs
REFERENCE 0307-661
20pcs carbide rotary burrs
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Type — verify units and ordered drawing
- Alu case
REFERENCE 0307-662
8pcs carbide rotary burrs
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Type — verify units and ordered drawing
- plastic case
REFERENCE 0307-663
8pcs HSS rotary burrs
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Type — verify units and ordered drawing
- Alu case
REFERENCE 0307-664
12pcs reciprocating saw blade
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 4pc 6 in. x 6TPI,BIM 3pc 6 in. x 18TPI,BIM 2pc 8 in. x 14TPI,BIM 2pc 9 in. x 6TPI,BIM 1pc 9 in. x 10TPI,DEMO,BIM
- Size — verify units and ordered drawing
- blister
REFERENCE 0307-665
20pcs jig saw blade
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Type — verify units and ordered drawing
- T-shank
REFERENCE 0307-666
4pcs TiN coated multi function drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 1 x HSS step drill (4-12mm) 1 x HSS tube drill (8-20mm) 1 x HSS drill saw (6mm) 1 x HSS countersink (12.4mm) 1/4" quick change shaft, (for hexagonal adapter)
- Type — verify units and ordered drawing
- TiN coated
REFERENCE 0307-667
Deburring countersink assortments
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size — verify units and ordered drawing
- 3pcs; 4pcs; 5pcs; 6pcs
REFERENCE 0307-668
6pcs countersink
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size — verify units and ordered drawing
- standard; TiN coated
REFERENCE 0307-669
11pcs carbide insert tool bits
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size — verify units and ordered drawing
- 8x8; 10x10
REFERENCE 0307-670
8pcs TCT annular cutter
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Type — verify units and ordered drawing
- TCT
REFERENCE 0307-671
7pcs HSS annular cutter
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size — verify units and ordered drawing
- HSS; HSS TiN coated
REFERENCE 0307-672
20pcs HSS ground end mills
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 2 and 4 flutes 3, 4, 5, 6, 8, 10, 12, 14, 16, 20mm
- Size — verify units and ordered drawing
- HSS ground; HSS ground TiN coated
REFERENCE 0307-673
3pcs step drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size — verify units and ordered drawing
- 3/16"-1/2" 6 steps 1/4"-3/4" 9 steps 1/8"-1/2" 13steps
REFERENCE 0307-674
5pcs HSS S&D drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size — verify units and ordered drawing
- 9/16-5/8-3/4-7/8-1"
REFERENCE 0307-675
25pcs HSS twist drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 1 - 13 x 0.5mm
- Size — verify units and ordered drawing
- roll forged; fully ground; fully ground TiN coated; fully ground cobalt; fully ground black&golden
REFERENCE 0307-676
19pcs HSS twist drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7,7.5, 8, 8.5, 9, 9.5,10mm
- Size — verify units and ordered drawing
- roll forged; fully ground; fully ground TiN coated; fully ground cobalt; fully ground black&golden
REFERENCE 0307-677
5pcs HSS twist drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 3-4-5-6-8mm
- Size — verify units and ordered drawing
- roll forged; fully ground; fully ground TiN coated; fully ground cobalt; fully ground black oxied
REFERENCE 0307-678
6pcs countersink arc groove
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-679
9pcs spot weld cutter
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 1pc 3/8" cutter blade with arbor 1pc 5/8" cutter blade with arbor. 2pc 3/8" replacement blades. 2pc 5/16" relacement blades 2pc replacements pilots 1pc hex key
- Type — verify units and ordered drawing
- 9pc
REFERENCE 0307-680
Metric tap-and-die assortment
Metric taps and dies with a die handle and tap wrench form this threading assortment. Select each thread and pitch against a confirmed bill of materials.
- Thread selection
- M3–M10; select the pitch for each tool from an approved bill of materials.
- type — verify units and ordered drawing
- 65Mn
REFERENCE 0307-681
Straight-flute TiN step-drill assortment
A straight-flute TiN-treated HSS direction in three ranges.
- Ranges
- 4–12; 4–20; 6–30 mm
- Set
- 3 pieces
REFERENCE 0307-682
Blasted SDS-plus hammer-drill set
YG8/YG8C/YG8X carbide tip and 45# steel/40Cr body choices are stated. Confirm the actual material pairing.
- Pack
- 7 pieces
- Diameter × length
- 5/6/8 × 110 mm; 6/8/10/12 × 160 mm
REFERENCE 0307-683
Spiral-flute metric tap assortment
Spiral-flute taps form this metric-thread assortment.
- Sizes
- M3, M4, M5, M6, M8, M10, M12
- Pack
- 7 pieces
REFERENCE 0307-684
Straight-flute metric tap assortment
Straight-flute taps form a separate metric-thread assortment.
- Sizes
- M3, M4, M5, M6, M8, M10, M12
- Pack
- 7 pieces
REFERENCE 0307-685
19pcs HSS twist drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7,7.5, 8, 8.5, 9, 9.5, 10mm
- Size — verify units and ordered drawing
- roll forged; fully ground; sidewinder; fully ground TiN coated; fully ground cobalt
REFERENCE 0307-686
4pcs TCT hole saw
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 21, 27, 33, 42mm
- Type — verify units and ordered drawing
- Alu case
REFERENCE 0307-687
99pcs HSS twist drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5，6, 6.5, 8, 10mm
- Size — verify units and ordered drawing
- roll forged; fully ground; fully ground TiN coated; fully ground cobalt
REFERENCE 0307-688
3pcs diamond vacuum brazed hole saw
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 6,8,10mm
- Size — verify units and ordered drawing
- Alu case
REFERENCE 0307-689
7pcs carbide grit hole saw
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 22, 28, 44, 73mm 2pc arbors 1pc pilot drill
- Size — verify units and ordered drawing
- 7pc
REFERENCE 0307-690
11pcs carbide grit hole saw
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 6pc carbide hole saw 22,28,35,44,67,73mm 2pc diamond disc 115mm continues and turbo 2pc A1 and A2 arbors 1pc allan key
- Size — verify units and ordered drawing
- 11pc
REFERENCE 0307-691
9pcs carbide grit hole saw
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 22, 28, 35, 44, 68, 73mm 2pcs arbors 1pc hex key
- Size — verify units and ordered drawing
- 9pc
REFERENCE 0307-692
8pcs carbide grit hole saw
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 33-43-53-67-73-83mm 1pc center drill 1pc fitting plate
- Size — verify units and ordered drawing
- 8pc
REFERENCE 0307-693
12pcs SDS plus shank hammer drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 5,6x110mm, 8,10,12x160mm 14,16x210mm, 18x300mm, 20x450mm Point chisel (250mm), flat chisel (20 x 250mm) Groove chisel (250mm)
- Size — verify units and ordered drawing
- BMC
REFERENCE 0307-694
12pcs SDS plus shank hammer drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 5,6x110mm, 8,10,12x160mm 10,12x210mm, 10,12,16x450mm Point chisel (250mm), flat chisel (20 x 250mm)
- Size — verify units and ordered drawing
- alu case
REFERENCE 0307-695
6pcs SDS plus shank hammer drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 5,6,8x110mm, 6,8,10x160mm
- Size — verify units and ordered drawing
- plastic case
REFERENCE 0307-696
6pcs glass drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 4, 5,6, 8, 10,12mm
- Size — verify units and ordered drawing
- plastic case
REFERENCE 0307-697
13pcs masonry drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 3,4, 5, 5.5, 6, 6, 6.5, 7, 7, 7.5, 8, 10, 12mm
- Size — verify units and ordered drawing
- metal case
REFERENCE 0307-698
8pcs masonry drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 3, 4, 5, 6, 7, 8, 9, 10mm
- Size — verify units and ordered drawing
- Zn plated; Ni plated; Cr plated; Satin finished; black flute bright shank and margin
REFERENCE 0307-699
5pcs masonry drill with hex shank
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 5.5,6,6.5,7,8mm
- Size — verify units and ordered drawing
- sandblasted
REFERENCE 0307-700
5pcs masonry drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 4,5,6,8,10mm
- Size — verify units and ordered drawing
- Zn plated; Ni plated; Cr plated
REFERENCE 0307-701
4pcs masonry drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 5, 6, 8,10mm
- Size — verify units and ordered drawing
- black&white
REFERENCE 0307-702
16pcs TCT multi-function hole saw
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 13pc std hole saw 3pc arbors
- Type — verify units and ordered drawing
- alu case
REFERENCE 0307-703
Adjustable circle hole cutter
Select the point or cutting structure, shank and working length for the work material and machine. Confirm rotary/hammer use, cooling and depth requirements.
- Range options
- 40–120 or 40–300 mm
REFERENCE 0307-704
Metric router-profile assortment
A guided/unguided router direction combines straight, dovetail, pilot, flush, mortise and decorative profiles. Agree the actual dimension labels and paired drawing.
- Straight references
- 3.2 × 14; 6.5 × 20; 12.7 × 25; 19 × 20 mm
- Dovetail / pilot / flush trim
- 12.7 × 8; 6.5 × 30; 12.7 × 12 mm
- Mortising
- 12.7 × 13 mm
- Core box
- R3.2 / 7 / 6 mm reference
- 90° V
- 12.7 × 10 mm
- 45° guided chamfer
- 30 × 14 mm
- Guided cove
- 9.5 / 30 / 14 mm reference
- Guided rabbet
- 30 × 10 mm
- Roman ogee
- 25 × 12 mm
- Round-over
- R10 / 32 / 16 mm reference
- Size — verify units and ordered drawing
- alu case
REFERENCE 0307-705
4pcs router bits
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 1pc straight bit 63mm x 12.7mm 2pc straight bit 50mm x 12.7mm with 1/2” shank 1pc flush trim bit 25.4mm x 12.7mm with 1/4” shank
- Size — verify units and ordered drawing
- wood case
REFERENCE 0307-706
6pcs wooden turning tools
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size — verify units and ordered drawing
- HSS wood case
REFERENCE 0307-707
5pcs tenon dowel&plug cutter
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 15,20,25,30,35mm
- Size — verify units and ordered drawing
- Standard; SDS shank; SDS shank TiN coated
REFERENCE 0307-708
4pcs plug cutter (claw type)
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 6, 8, 10, 13mm
- Size — verify units and ordered drawing
- cut tapered wood
REFERENCE 0307-709
4pcs plug cutter (chamfered type)
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 6, 8, 10, 13mm
- Size — verify units and ordered drawing
- cut cylinder wood
REFERENCE 0307-710
6pcs plug cutter (chamfered type)
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 10,12,16,20,22,25mm
- Size — verify units and ordered drawing
- Standard
REFERENCE 0307-711
7pcs shell drill countersink
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size — verify units and ordered drawing
- 3,3.5,4,4.5,5,5.5,6mm
REFERENCE 0307-712
6pcs forstner and tenon dowerl&plug cutter
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 3pcs cylinder boring bits 15,20,25mm tenon dowel&plug cutter each 1pc
- Size — verify units and ordered drawing
- 6pcs
REFERENCE 0307-713
16pcs forstner bits
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 6,10,12,16,20,22,25,28,32,35,38,41,45,48,51,54mm
- Size — verify units and ordered drawing
- Standard; TiN coated
REFERENCE 0307-714
5pcs forstner bits
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 15,20,25,30,35 mm
- Size — verify units and ordered drawing
- Standard; TiN coated; Quick change shank; Quick change shank TiN coated; SDS plus shank; SDS plus shank TiN coated
REFERENCE 0307-715
6pcs spade(flat) bit with hex shank
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 10,13,16,19,22,25mm
- Size — verify units and ordered drawing
- standard; TiN coated
REFERENCE 0307-716
6pcs spade( flat) bit
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 10,12,16,18,20,25mm
- Size — verify units and ordered drawing
- Hex shank; TiN coated; SDS shank; SDS shank TiN coated; Quick change shank; Quick change shank TiN coated
REFERENCE 0307-717
6pcs auger bits
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 6,8,10,12,16,20mm
- Size — verify units and ordered drawing
- 200mm standard; 230mm standard; 300mm standard; 400mm standard; 460mm standard; 200mm TiN coated; 230mm TiN coated; 300mm TiN coated; 400mm TiN coated; 460mm TiN coated; SDS shank 200mm; SDS shank 230mm; SDS shank 300mm; SDS shank 400mm; SDS shank 460mm; SDS shank 200mm TiN coated; SDS shank 230mm TiN coated; SDS shank 300mm TiN coated; SDS shank 400mm TiN coated; SDS shank 460mm TiN coated
REFERENCE 0307-718
5pcs mortise bits
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 6,8,10,12,16mm
- Size — verify units and ordered drawing
- standard; TiN coated
REFERENCE 0307-719
6pcs 4-flute wood bits
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 12, 16, 20, 22, 25, 28mm
- Size — verify units and ordered drawing
- alu case
REFERENCE 0307-720
6pcs 4-flute wood bits
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 12, 16, 20, 22, 25, 32mm
- Size — verify units and ordered drawing
- plastic box
REFERENCE 0307-721
25pcs wood drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 1.0 - 13.0 by 0.5mm
- Size — verify units and ordered drawing
- HSS
REFERENCE 0307-722
19pcs wood drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 1.0 - 10.0 by 0.5mm
- Size — verify units and ordered drawing
- HSS
REFERENCE 0307-723
8pcs wood drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 3-10 x 1mm
- Size — verify units and ordered drawing
- skin card; plastic case A; plastic case B; plastic case C
REFERENCE 0307-724
12pcs carbon hole saw
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 19,22,29,38,44,51,60,67,82mm, 2pc arbors, 1pc hex key
- Type — verify units and ordered drawing
- carbon steel
- Type — verify units and ordered drawing (alternative schedule 2)
- carbon steel
REFERENCE 0307-725
Five-cutter carbide-tip hole-saw assortment
Five hole-saw bodies are listed with an arbor, pilot drill, washer and hex key. Confirm the accessory bill and total pack count separately.
- Size options
- 5pcs hole saw : 2-1/2"(64mm); 3"(76mm); 3-1/2"(89mm); 4“（102mm); 5" (127mm) 1pc arbor with center drill and washer 1pc hex key
- Type — verify units and ordered drawing
- carbon steel
REFERENCE 0307-726
10pcs reciprocating saw blade
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 6" HCS x6 8" HCS x2 6" BiM x2
- Size — verify units and ordered drawing
- BiM+HCS
REFERENCE 0307-727
135pcs comb. drill
Build a repeat-order assortment around the actual tool sizes, interfaces, accessories and case layout. Confirm the component bill of materials and count for the selected pack.
- Size options
- 85pc TiN coated bits 25pc HSS drill 3,4,5,6,8mm 25pc HSS drill TiN coated 3,4,5,6,8mm
- Packing — verify units and ordered drawing
- alu case
REFERENCE 0307-728
Driver assortments with hanging clips
Ten component layouts use hanging clips; the clip is packaging/organisation hardware, not climbing or fall-protection equipment.
- Layout 1
- 50 mm hex × 5; star × 5
- Layout 2
- 50 mm hex × 3; star × 3; nut setters × 4
- Layout 3
- 25 mm Phillips × 3; hex × 3; slotted × 2; square × 2; 1/4 × 60 mm quick-release magnetic holder
- Layout 4
- Same 25 mm bit selection plus 1/4 × 140 mm adapter and 135 mm holder screwdriver
- Layout 5
- Hex × 8; sockets × 6; 1/4 × 60 mm quick-release adapter
- Layout 6
- Hex × 8; sockets × 6; 1/4 × 140 mm adapter; 135 mm holder screwdriver
- Layout 7
- 25 mm cross-drive × 2; star × 14; 1/4 × 60 mm holder
- Layout 8
- 25 mm star × 16; 1/4 × 60 mm holder
- Layout 9
- 25 mm star × 12; 45 mm nut setters × 4; 1/4 × 60 mm holder
- Layout 10
- 25 mm Phillips × 3; cross-drive × 3; slotted × 4; star × 5; hex × 5
- type — verify units and ordered drawing
- 10pcs
- type — verify units and ordered drawing (alternative schedule 2)
- 10pcs
- type — verify units and ordered drawing (alternative schedule 3)
- 11pcs
- type — verify units and ordered drawing (alternative schedule 4)
- 12pcs
- type — verify units and ordered drawing (alternative schedule 5)
- 15pcs
- type — verify units and ordered drawing (alternative schedule 6)
- 16pcs
- type — verify units and ordered drawing (alternative schedule 7)
- 17pcs
- type — verify units and ordered drawing (alternative schedule 8)
- 17pcs
- type — verify units and ordered drawing (alternative schedule 9)
- 17pcs
- type — verify units and ordered drawing (alternative schedule 10)
- 20pcs
REFERENCE 0307-729
Mixed drill and driver assortment
Separate HSS, wood and masonry drill groups combine with two driver lengths, nut drivers and accessories. Coordinate the pack layout and tool interfaces for repeat orders.
- Ti-treated HSS twist drills
- 10 pieces: 2, 2, 3, 3, 4, 4, 4.5, 5, 5.5, 6 mm
- Wood drills
- 5 pieces: 4, 5, 6, 8, 10 mm
- Masonry drills
- 5 pieces: 4, 5, 6, 8, 10 mm
- 25 mm drivers
- 40 pieces: slotted 3×2, 4×2, 5×2, 6×2, 7×2 mm; Phillips 1×2, 2×3, 3×2; cross-drive 1×2, 2×3, 3×2; star 10,15,20,25,27,30,40; hex 2,3,4,5,6 mm; square 1×1,2×2,3×1
- 50 mm drivers
- 10 pieces: slotted 4,5,6,7 mm; Phillips 1,2,3; cross-drive 1,2,3
- Nut drivers
- 9 pieces: 5,6,7,8,9,10,11,12,13 mm
- Other components
- 1 bit holder; 1 countersink
- Pack count
- 81 pieces; approve the current component bill
REFERENCE 0307-730
Mixed wood, masonry and metal drilling pack
A T-handle, holder and bubble level accompany mixed drivers and substrate-specific drill groups. The original total and wood-bit count need a confirmed bill of materials.
- Driver groups
- Slotted × 5; hex × 6; cross-drive × 4; Phillips × 4; star × 8; square × 3
- Masonry drills
- 5 × 1, 6 × 2, 8 × 2, 10 × 1 mm
- Wood size references
- 4, 5, 6, 7, 8, 10 mm; confirm count
- Metal sizes
- 2, 3, 4, 5, 6, 8 mm
REFERENCE 0307-731
Milling insert application families
Face, high-feed, shoulder and profile milling require separate insert geometries and grades.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-732
Internal/external thread-turning insert families
Thread profile, pitch and chip-control geometry guide the grade selection.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-733
Steel, stainless and cast-iron grooving inserts
Parting/grooving options are selected separately for steel, stainless steel and cast iron.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-734
Heat-resistant-alloy turning inserts
The detailed application is heat-resistant alloys despite a stainless-steel heading. Roughing, semi-finishing and finishing directions are distinct.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-735
Non-ferrous turning inserts
A separate insert direction addresses non-ferrous metals and alloy machining.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-736
Cast-iron turning inserts
General, heavy and interrupted cast-iron turning are separate application directions.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-737
Stainless-steel turning inserts
Roughing, semi-finishing and finishing options have distinct chip-control directions.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-738
Steel and alloy-steel turning inserts
Heavy roughing, roughing, semi-finishing and finishing directions have distinct insert geometries.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-739
Rasp disc for wood
Match the abrasive or polishing structure to the substrate and finish. Confirm the diameter, fixing interface, backing, grit and marked operating limit for the selected item.
- Dimensions and configurations
15 listed configurations · view dimensions
Dia. | type — verify units and ordered drawing Dia. type 85 Flat 100 Flat 110 Flat 115 Flat 125 Flat 85 Beveled 100 Beveled 110 Beveled 115 Beveled 125 Beveled 85 Arc 100 Arc 110 Arc 115 Arc 125 Arc
REFERENCE 0307-740
Two-way mallet
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 20mm 25mm 30mm 35mm 40mm 45mm 50mm
- Construction
- Wood handle
REFERENCE 0307-741
Wood handle axe
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 500G 600G 800G 1000G 1250G 1400G 1600G
REFERENCE 0307-742
Wood handle axe
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 800G
- Construction
- Wood handle
REFERENCE 0307-743
Camp axe
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 600G
REFERENCE 0307-744
Rubber handle axe
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 500G 600G
REFERENCE 0307-745
Adze
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 300G 400G 500G
- Construction
- Wood handle
REFERENCE 0307-746
Pickaxe
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 1500G 2000G
- Construction
- Wood handle
REFERENCE 0307-747
Elemental multi-function axe
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-748
Grubbing mattock head
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 600G
REFERENCE 0307-749
Pickax
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 600G
REFERENCE 0307-750
Hammer head with handle
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Selection brief
- Confirm dimensions, material, interface and approved sample/drawing for this direction.
REFERENCE 0307-751
Garden hoe with fork
Match the drive or holding interface, dimensions and construction to the task. Confirm fit and the required accessories before ordering.
- Size options
- 400G
REFERENCE 0307-752
Curved cutting edge with relieved clearance solid-carbide drills, 3D direction
Curved cutting edge with relieved clearance. Select coolant routing, work material and the actual retained cutting depth from the drawing.
- Diameter range
- 3–20 mm
- Depth class
- 3D nominal direction; actual listed maximum depth is size-specific
- Coolant
- With/without coolant options
- Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units
- 3~3.7 / 6 / 62 / 20 / 14 / 36; 4~4.65 / 6 / 66 / 24 / 17 / 36; 4.8~6 / 6 / 66 / 28 / 20 / 36; 6.1~7 / 8 / 79 / 34 / 24 / 36; 7.1~8.0 / 8 / 79 / 41 / 29 / 36; 8.1~10 / 10 / 89 / 47 / 35 / 40; 10.25~12 / 12 / 102 / 55 / 40 / 45; 12.25~14 / 14 / 107 / 60 / 43 / 45; 14.25~16 / 16 / 115 / 65 / 45 / 48; 16.50~18 / 18 / 123 / 73 / 51 / 48; 18.50~20 / 20 / 131 / 75 / 55 / 50
REFERENCE 0307-753
Curved cutting edge with relieved clearance solid-carbide drills, 5D direction
Curved cutting edge with relieved clearance. Select coolant routing, work material and the actual retained cutting depth from the drawing.
- Diameter range
- 3–20 mm
- Depth class
- 5D nominal direction; actual listed maximum depth is size-specific
- Coolant
- With/without coolant options
- Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units
- 3~3.7 / 6 / 66 / 28 / 23 / 36; 4~4.65 / 6 / 74 / 36 / 29 / 36; 4.8~6 / 6 / 82 / 44 / 35 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 8.1~10 / 10 / 103 / 61 / 49 / 40; 10.25~12 / 12 / 118 / 71 / 56 / 45; 12.20~14 / 14 / 124 / 77 / 60 / 45; 14.25~16 / 16 / 133 / 83 / 63 / 48; 16.50~18 / 18 / 143 / 93 / 71 / 48; 18.50~20 / 20 / 153 / 101 / 77 / 50
REFERENCE 0307-754
Wave-shaped curved cutting edge solid-carbide drills, 3D direction
Wave-shaped curved cutting edge, flat clearance and an enlarged chip-groove direction. Select coolant routing, work material and the actual retained cutting depth from the drawing.
- Diameter range
- 3–20 mm
- Depth class
- 3D nominal direction; actual listed maximum depth is size-specific
- Coolant
- With/without coolant options
- Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units
- 3~3.7 / 6 / 62 / 20 / 14 / 36; 4.8~6 / 6 / 66 / 28 / 20 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 7.1~8.0 / 8 / 79 / 41 / 29 / 36; 8.1~10 / 10 / 89 / 47 / 35 / 40; 10.25~12 / 12 / 102 / 55 / 40 / 45; 12.25~14 / 14 / 107 / 60 / 43 / 45; 14.25~16 / 16 / 115 / 65 / 45 / 48; 16.50~18 / 18 / 123 / 73 / 51 / 48; 18.50~20 / 20 / 131 / 79 / 55 / 50
REFERENCE 0307-755
Wave-shaped curved cutting edge solid-carbide drills, 5D direction
Wave-shaped curved cutting edge, flat clearance and an enlarged chip-groove direction. Select coolant routing, work material and the actual retained cutting depth from the drawing.
- Diameter range
- 3–20 mm
- Depth class
- 5D nominal direction; actual listed maximum depth is size-specific
- Coolant
- With/without coolant options
- Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units
- 3~3.7 / 6 / 66 / 28 / 23 / 36; 4~4.65 / 6 / 74 / 36 / 29 / 36; 4.8~6 / 6 / 82 / 44 / 35 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 8.1~10 / 10 / 103 / 61 / 49 / 40; 10.25~12 / 12 / 118 / 71 / 56 / 45; 12.20~14 / 14 / 124 / 77 / 60 / 45; 14.25~16 / 16 / 133 / 83 / 63 / 48; 16.50~18 / 18 / 143 / 93 / 71 / 48; 18.50~20 / 20 / 153 / 101 / 77 / 50
REFERENCE 0307-756
Curved cutting edge solid-carbide drills, 3D direction
Curved cutting edge, flat clearance and a coated body selected for stainless steel/titanium/superalloy applications. Select coolant routing, work material and the actual retained cutting depth from the drawing.
- Diameter range
- 3–20 mm
- Depth class
- 3D nominal direction; actual listed maximum depth is size-specific
- Coolant
- Internal-coolant direction
- Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units
- 3~3.7 / 6 / 62 / 20 / 14 / 36; 4.8~6 / 6 / 66 / 28 / 20 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 7.1~8.0 / 8 / 79 / 41 / 29 / 36; 8.1~10 / 10 / 89 / 47 / 35 / 40; 10.25~12 / 12 / 102 / 55 / 40 / 45; 12.25~14 / 14 / 107 / 60 / 43 / 45; 14.25~16 / 16 / 115 / 65 / 45 / 48; 16.50~18 / 18 / 123 / 73 / 51 / 48; 18.50~20 / 20 / 131 / 79 / 55 / 50
REFERENCE 0307-757
Curved cutting edge solid-carbide drills, 5D direction
Curved cutting edge, flat clearance and a coated body selected for stainless steel/titanium/superalloy applications. Select coolant routing, work material and the actual retained cutting depth from the drawing.
- Diameter range
- 3–20 mm
- Depth class
- 5D nominal direction; actual listed maximum depth is size-specific
- Coolant
- Internal-coolant direction
- Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units
- 3~3.7 / 6 / 66 / 28 / 23 / 36; 4~4.65 / 6 / 74 / 36 / 29 / 36; 4.8~6 / 6 / 82 / 44 / 35 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 8.1~10 / 10 / 103 / 61 / 49 / 40; 10.25~12 / 12 / 118 / 71 / 56 / 45; 12.20~14 / 14 / 124 / 77 / 60 / 45; 14.25~16 / 16 / 133 / 83 / 63 / 48; 16.50~18 / 18 / 143 / 93 / 71 / 48; 18.50~20 / 20 / 153 / 101 / 77 / 50
REFERENCE 0307-758
Straight cutting edge solid-carbide drills, 3D direction
Straight cutting edge, flat clearance and AlTiN coating. Select coolant routing, work material and the actual retained cutting depth from the drawing.
- Diameter range
- 3–20 mm
- Depth class
- 3D nominal direction; actual listed maximum depth is size-specific
- Coolant
- With/without coolant options
- Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units
- 3~3.7 / 6 / 62 / 20 / 14 / 36; 4.8~6 / 6 / 66 / 28 / 20 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 7.1~8.0 / 8 / 79 / 41 / 29 / 36; 8.1~10 / 10 / 89 / 47 / 35 / 40; 10.25~12 / 12 / 102 / 55 / 40 / 45; 12.25~14 / 14 / 107 / 60 / 43 / 45; 14.25~16 / 16 / 115 / 65 / 45 / 48; 16.50~18 / 18 / 123 / 73 / 51 / 48; 18.50~20 / 20 / 131 / 79 / 55 / 50
REFERENCE 0307-759
Straight cutting edge solid-carbide drills, 5D direction
Straight cutting edge, flat clearance and AlTiN coating. Select coolant routing, work material and the actual retained cutting depth from the drawing.
- Diameter range
- 3–20 mm
- Depth class
- 5D nominal direction; actual listed maximum depth is size-specific
- Coolant
- With/without coolant options
- Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units
- 3~3.7 / 6 / 66 / 28 / 23 / 36; 4~4.65 / 6 / 74 / 36 / 29 / 36; 4.8~6 / 6 / 82 / 44 / 35 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 8.1~10 / 10 / 103 / 61 / 49 / 40; 10.25~12 / 12 / 118 / 71 / 56 / 45; 12.20~14 / 14 / 124 / 77 / 60 / 45; 14.25~16 / 16 / 133 / 83 / 63 / 48; 16.50~18 / 18 / 143 / 93 / 71 / 48; 18.50~20 / 20 / 153 / 101 / 77 / 50
REFERENCE 0307-760
AlTiN straight-edge carbide drills, 8D direction
Straight edge, flat clearance and internal coolant form this longer drill direction.
- Diameter range
- 3–16 mm
- Depth class
- 8D nominal; confirm actual working depth
- Diameter / shank / overall / flute / shank length — confirm drawing units
- 3~3.7 / 6 / 72 / 34 / 36; 3.8~4.7 / 6 / 81 / 43 / 36; 4.8~6 / 6 / 95 / 57 / 36; 6.1~8 / 8 / 114 / 76 / 36; 8.1~10 / 10 / 142 / 95 / 40; 10.2~12 / 12 / 162 / 114 / 45; 12.1~14 / 14 / 182 / 133 / 45; 14.2~16 / 16 / 203 / 152 / 48
REFERENCE 0307-761
AlTiN straight-edge carbide drills, 12D direction
Straight edge, flat clearance and internal coolant form this longer drill direction.
- Diameter range
- 3–20 mm
- Depth class
- 12D nominal; confirm actual working depth
- Diameter / shank / overall / flute / shank length — confirm drawing units
- 3~3.7 / 6 / 90 / 50 / 36; 3.8~4.7 / 6 / 102 / 64 / 36; 4.8~6 / 6 / 116 / 78 / 36; 6.1~8 / 8 / 146 / 108 / 36; 8.1~10 / 10 / 162 / 120 / 40; 10.2~12 / 12 / 204 / 156 / 45; 12.5~14 / 14 / 230 / 182 / 45; 14.5~16 / 16 / 260 / 208 / 48; 16.5~18 / 18 / 285 / 234 / 48; 18.5~20 / 16 / 310 / 258 / 50
REFERENCE 0307-762
Four-margin deep-hole carbide drills, 15D direction
AlTiN treatment, four margin lands, a curved edge and flat clearance are described. Establish coolant, pilot-hole and chip-evacuation requirements for the actual hole.
- Diameter range
- 3–14 mm
- Depth class
- 15D nominal; the approved drawing and actual retained depth govern
- Coolant
- Internal coolant
- Diameter / shank / overall / flute / shank length — confirm drawing units
- 3 / 6 / 95 / 55 / 36; 3.17 / 6 / 106 / 67 / 36; 3.5~4 / 6 / 116 / 76 / 36; 4.37~5 / 6 / 133 / 93 / 36; 5.1~6 / 6 / 150 / 110 / 36; 6.35~7 / 8 / 167 / 127 / 36; 7.14~8 / 8 / 183 / 143 / 36; 8.33~9 / 10 / 204 / 160 / 40; 9.13~10 / 10 / 221 / 177 / 40; 10.32~11 / 12 / 247 / 198 / 45; 11.11~12 / 12 / 263 / 214 / 45; 12.3~14 / 14 / 297 / 248 / 45
REFERENCE 0307-763
Four-margin deep-hole carbide drills, 20D direction
AlTiN treatment, four margin lands, a curved edge and flat clearance are described. Establish coolant, pilot-hole and chip-evacuation requirements for the actual hole.
- Diameter range
- 3–12 mm
- Depth class
- 20D nominal; the approved drawing and actual retained depth govern
- Coolant
- Internal coolant
- Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units
- 3 / 6 / 107 / 65 / 60 / 36; 3.175~4 / 6 / 134 / 92 / 86 / 36; 3.5~4 / 6 / 116 / 76 / 36 / 36; 4.5~5 / 6 / 158 / 118 / 110 / 36; 5.5 / 6 / 170 / 132 / 123 / 36; 5.556~6 / 6 / 182 / 144 / 135 / 36; 6.1~7 / 8 / 200 / 162 / 151 / 36; 7.144~8 / 8 / 222 / 184 / 172 / 36; 8.3~9 / 10 / 240 / 198 / 184 / 40; 9.525~10 / 10 / 262 / 220 / 205 / 40; 10.2~11 / 12 / 289 / 242 / 225 / 45; 11.113~12 / 12 / 311 / 264 / 246 / 45
REFERENCE 0307-764
Four-margin deep-hole carbide drills, 25D direction
AlTiN treatment, four margin lands, a curved edge and flat clearance are described. Establish coolant, pilot-hole and chip-evacuation requirements for the actual hole.
- Diameter range
- 3–12 mm
- Depth class
- 25D nominal; the approved drawing and actual retained depth govern
- Coolant
- Internal coolant
- Diameter / shank / overall / flute / shank length — confirm drawing units
- 3 / 6 / 125 / 85 / 36; 3.1 / 6 / 141 / 101 / 36; 3.5~4 / 6 / 156 / 116 / 36; 4.2~5 / 6 / 183 / 143 / 36; 5.1~6 / 6 / 210 / 170 / 36; 6.3~7 / 8 / 237 / 197 / 36; 6.1~7 / 8 / 200 / 162 / 36; 7.14~8 / 8 / 263 / 223 / 36; 8.5~9 / 10 / 294 / 250 / 40; 10 / 10 / 321 / 277 / 40; 11 / 12 / 359 / 310 / 40; 12 / 12 / 386 / 337 / 40
REFERENCE 0307-765
Four-margin deep-hole carbide drills, 30D direction
AlTiN treatment, four margin lands, a curved edge and flat clearance are described. Establish coolant, pilot-hole and chip-evacuation requirements for the actual hole.
- Diameter range
- 3–10 mm
- Depth class
- 30D nominal; the approved drawing and actual retained depth govern
- Coolant
- Internal coolant
- Diameter / shank / overall / flute / shank length — confirm drawing units
- 3 / 6 / 140 / 100 / 36; 3.1 / 6 / 158 / 118 / 36; 3.5~4 / 6 / 176 / 136 / 36; 4.2~5 / 6 / 208 / 168 / 36; 5.1~6 / 6 / 240 / 200 / 36; 6.3~7 / 8 / 272 / 232 / 36; 7.14~8 / 8 / 303 / 263 / 36; 8.5~9 / 10 / 339 / 295 / 40; 10 / 10 / 371 / 327 / 40
REFERENCE 0307-766
Four-margin deep-hole carbide drills, 40D direction
AlTiN treatment, four margin lands, a curved edge and flat clearance are described. Establish coolant, pilot-hole and chip-evacuation requirements for the actual hole.
- Diameter range
- 3–8 mm
- Depth class
- 40D nominal; the approved drawing and actual retained depth govern
- Coolant
- Internal coolant
- Diameter / shank / overall / flute / shank length — confirm drawing units
- 3 / 6 / 170 / 130 / 36; 3.1~3.5 / 6 / 193 / 153 / 36; 3.8~4 / 6 / 216 / 176 / 36; 4.2~4.5 / 6 / 238 / 198 / 36; 4.76~5 / 6 / 258 / 218 / 36; 5.1~5.5 / 8 / 280 / 240 / 36; 5.56~6 / 8 / 300 / 260 / 36; 6.3~6.5 / 8 / 322 / 282 / 36; 7 / 8 / 342 / 302 / 36; 7.14~7.5 / 8 / 363 / 323 / 36; 8 / 8 / 383 / 343 / 36
REFERENCE 0307-767
Uncoated carbide drills for aluminium/copper
An uncoated curved-edge direction with flat clearance provides with/without-coolant choices for non-ferrous drilling.
- Diameter range
- 3–20 mm
- Depth class
- 5D nominal direction
- Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units
- 3~3.7 / 6 / 66 / 28 / 23 / 36; 4~4.65 / 6 / 74 / 36 / 29 / 36; 4.8~6 / 6 / 82 / 44 / 35 / 36; 6.1~8 / 8 / 91 / 53 / 43 / 36; 8.1~10 / 10 / 103 / 61 / 49 / 40; 10.25~12 / 12 / 118 / 71 / 56 / 45; 12.20~14 / 14 / 124 / 77 / 60 / 45; 14.25~16 / 16 / 133 / 83 / 63 / 48; 16.5~18 / 18 / 143 / 93 / 71 / 48; 18.5~20 / 20 / 153 / 101 / 77 / 50
REFERENCE 0307-768
General straight-shank solid-carbide drills
A general straight-shank drill for the agreed steel/non-ferrous/plastic application.
- Diameter range
- 1–13 mm
- Point-angle options
- 118° or 135°
- Helix angle
- 30°
- Diameter / flute length / overall length — confirm drawing units
- 1 / 15 / 40; 7 / 40 / 65(80); 1.5 / 16 / 40; 7.5 / 40 / 80; 2 / 18 / 55; 8 / 40 / 80; 2.5 / 20 / 40; 8.5 / 40 / 80; 3 / 20 / 45; 9 / 40 / 80; 3.5 / 25 / 50; 9.5 / 40 / 80; 4 / 27 / 55; 10 / 50 / 100; 4.5 / 30 / 60; 10.5 / 50 / 100; 5 / 30 / 60; 11 / 50 / 100; 5.5 / 40 / 65(80); 11.5 / 50 / 100; 6 / 40 / 65(80); 12 / 50 / 100; 6.5 / 40 / 65(80); 12.5 / 50 / 100; 13 / 50 / 100
REFERENCE 0307-769
Long straight-shank carbide drills
A long drill direction requires a verified length drawing; the listed flute and overall lengths conflict.
- Diameter range
- 1–13 mm
- Point-angle options
- 118° or 135°
- Helix angle
- 30°
REFERENCE 0307-770
Extended straight-shank carbide drills
An extended straight-shank direction with two point-angle choices.
- Diameter range
- 1–13 mm
- Point-angle options
- 118° or 135°
- Helix angle
- 30°
- Diameter / flute length / overall length — confirm drawing units
- 1 / 16 / 50; 7 / 50 / 105(110); 1.5 / 24 / 50; 7.5 / 52 / 111(120); 2 / 24 / 55; 8 / 60 / 117(120); 2.5 / 26 / 61(65); 8.5 / 60 / 121(130); 3 / 30 / 71(75); 9 / 65 / 124(130); 3.5 / 35 / 73(75); 9.5 / 65 / 127(130); 4 / 40 / 83(90); 4.5 / 42 / 86(90); 10.5 / 70 / 137(150); 5 / 45 / 92(100); 11 / 70 / 140(150); 5.5 / 45 / 95(100); 11.5 / 70 / 143(150); 6 / 50 / 102(110); 12 / 70 / 149(150); 6.5 / 50 / 105(110); 12.5 / 70 / 149(150); 13 / 70 / 149(150)
REFERENCE 0307-771
Coated straight-shank carbide drills
A coated drill direction lists quenched/tempered steel applications; agree hardness and trial conditions.
- Diameter range
- 1–6 mm
- Point-angle options
- 118° or 135°
- Helix angle
- 30°
- Diameter / flute length / overall length — confirm drawing units
- 1 / 15 / 40; 1.5 / 16 / 40; 2 / 18 / 40; 2.5 / 20 / 40(45); 3 / 20 / 45; 3.5 / 25 / 50; 4 / 27 / 55; 4.5 / 30 / 60; 5 / 30 / 60; 5.5 / 40 / 80; 6 / 40 / 80
REFERENCE 0307-772
Replaceable-head carbide drills
A replaceable solid-carbide head on a steel holder is described for metal drilling. Confirm insert retention, screw and driver compatibility with the approved assembly.
- Insert diameter range
- 12–35.9 mm
- Point angle
- 140°
- Nominal depth choices
- 3D, 5D, 7D, 10D; actual geometry remains size-specific
- Diameter range / shank / flange / depth / L1 / L2 / L3 / screw thread / drive — confirm drawing units
- 12-12.9mm / 20 / 25 / 3D / 111 / 63 / 37.5 / M3.0 / T10; 12-12.9mm / 20 / 25 / 5D / 136 / 88 / 62.5 / M3.0 / T10; 12-12.9mm / 20 / 25 / 7D / 161 / 113 / 87.5 / M3.0 / T10; 12-12.9mm / 20 / 25 / 10D / 199 / 151 / 125 / M3.0 / T10; 13-13.9mm / 20 / 25 / 3D / 114 / 66 / 39 / M3.0 / T10; 13-13.9mm / 20 / 25 / 5D / 140 / 92 / 65 / M3.0 / T10; 13-13.9mm / 20 / 25 / 7D / 166 / 118 / 91 / M3.0 / T10; 13-13.9mm / 20 / 25 / 10D / 205 / 157 / 130 / M3.0 / T10; 14-14.9mm / 20 / 25 / 3D / 119 / 71 / 42 / M3.0 / T10; 14-14.9mm / 20 / 25 / 5D / 147 / 99 / 70 / M3.0 / T10; 14-14.9mm / 20 / 25 / 7D / 175 / 127 / 98 / M3.0 / T10; 14-14.9mm / 20 / 25 / 10D / 217 / 169 / 140 / M3.0 / T10; 15-15.9mm / 20 / 25 / 3D / 127 / 77 / 45 / M3.0 / T10; 15-15.9mm / 20 / 25 / 5D / 157 / 107 / 75 / M3.0 / T10; 15-15.9mm / 20 / 25 / 7D / 187 / 137 / 105 / M3.0 / T10; 15-15.9mm / 20 / 25 / 10D / 232 / 182 / 150 / M3.0 / T10; 16-16.9mm / 20 / 25 / 3D / 132 / 82 / 48 / M3.5 / T15; 16-16.9mm / 20 / 25 / 5D / 164 / 114 / 80 / M3.5 / T15; 16-16.9mm / 20 / 25 / 7D / 196 / 146 / 112 / M3.5 / T15; 16-16.9mm / 20 / 25 / 10D / 244 / 194 / 160 / M3.5 / T15; 17-17.9mm / 20 / 25 / 3D / 132 / 82 / 51 / M3.5 / T15; 17-17.9mm / 20 / 25 / 5D / 166 / 116 / 85 / M3.5 / T15; 17-17.9mm / 20 / 25 / 7D / 200 / 150 / 119 / M3.5 / T15; 17-17.9mm / 20 / 25 / 10D / 251 / 201 / 170 / M3.5 / T15; 18-18.9mm / 20 / 25 / 3D / 135 / 85 / 54 / M3.5 / T15; 18-18.9mm / 20 / 25 / 5D / 171 / 121 / 90 / M3.5 / T15; 18-18.9mm / 20 / 25 / 7D / 207 / 157 / 126 / M3.5 / T15; 18-18.9mm / 20 / 25 / 10D / 261 / 211 / 180 / M3.5 / T15; 19-19.9mm / 20 / 25 / 3D / 138 / 88 / 57 / M4.0 / T15; 19-19.9mm / 20 / 25 / 5D / 176 / 126 / 95 / M4.0 / T15; 19-19.9mm / 20 / 25 / 7D / 214 / 164 / 133 / M4.0 / T15; 19-19.9mm / 20 / 25 / 10D / 271 / 221 / 190 / M4.0 / T15; 20-20.9mm / 20 / 25 / 3D / 146 / 90 / 60 / M4.0 / T20; 20-20.9mm / 20 / 25 / 5D / 186 / 130 / 100 / M4.0 / T20; 20-20.9mm / 20 / 25 / 7D / 226 / 186 / 140 / M4.0 / T20; 20-20.9mm / 20 / 25 / 10D / 286 / 246 / 200 / M4.0 / T20; 21-21.9mm / 25 / 25 / 3D / 149 / 93 / 63 / M5.0 / T20; 21-21.9mm / 25 / 25 / 5D / 191 / 135 / 105 / M5.0 / T20; 21-21.9mm / 25 / 25 / 7D / 233 / 177 / 147 / M5.0 / T20; 21-21.9mm / 25 / 25 / 10D / 296 / 240 / 210 / M5.0 / T20; 22-22.9mm / 25 / 34 / 3D / 153 / 97 / 66 / M5.0 / T20; 22-22.9mm / 25 / 34 / 5D / 197 / 144 / 110 / M5.0 / T20; 22-22.9mm / 25 / 34 / 7D / 241 / 188 / 154 / M5.0 / T20; 22-22.9mm / 25 / 34 / 10D / 307 / 251 / 220 / M5.0 / T20; 23-23.9mm / 25 / 34 / 3D / 156 / 100 / 69 / M5.0 / T20; 23-23.9mm / 25 / 34 / 5D / 202 / 146 / 115 / M5.0 / T20; 23-23.9mm / 25 / 34 / 7D / 248 / 192 / 161 / M5.0 / T20; 23-23.9mm / 25 / 34 / 10D / 317 / 261 / 230 / M5.0 / T20; 24-24.9mm / 25 / 34 / 3D / 164 / 104 / 72 / M5.0 / T20; 24-24.9mm / 25 / 34 / 5D / 212 / 152 / 120 / M5.0 / T20; 24-24.9mm / 25 / 34 / 7D / 261 / 200 / 168 / M5.0 / T20; 24-24.9mm / 25 / 34 / 10D / 332 / 272 / 240 / M5.0 / T20; 25-25.9mm / 25 / 34 / 3D / 166 / 106 / 75 / M5.0 / T20; 25-25.9mm / 25 / 34 / 5D / 216 / 156 / 125 / M5.0 / T20; 25-25.9mm / 25 / 34 / 7D / 266 / 206 / 175 / M5.0 / T20; 25-25.9mm / 25 / 34 / 10D / 341 / 281 / 250 / M5.0 / T20; 26-26.9mm / 25 / 34 / 3D / 169 / 109 / 78 / M5.0 / T25; 26-26.9mm / 25 / 34 / 5D / 221 / 161 / 130 / M5.0 / T25; 26-26.9mm / 25 / 34 / 7D / 273 / 213 / 182 / M5.0 / T25; 26-26.9mm / 25 / 34 / 10D / 351 / 291 / 260 / M5.0 / T25; 27-27.9mm / 32 / 41 / 3D / 173 / 113 / 81 / M6.0 / T25; 27-27.9mm / 32 / 41 / 5D / 227 / 167 / 135 / M6.0 / T25; 27-27.9mm / 32 / 41 / 7D / 281 / 221 / 189 / M6.0 / T25; 27-27.9mm / 32 / 41 / 10D / 362 / 302 / 270 / M6.0 / T25; 28-28.9mm / 32 / 41 / 3D / 178 / 118 / 84 / M6.0 / T25; 28-28.9mm / 32 / 41 / 5D / 234 / 174 / 140 / M6.0 / T25; 28-28.9mm / 32 / 41 / 7D / 290 / 230 / 196 / M6.0 / T25; 28-28.9mm / 32 / 41 / 10D / 374 / 314 / 280 / M6.0 / T25; 29-29.9mm / 32 / 41 / 3D / 182 / 122 / 87 / M6.0 / T25; 29-29.9mm / 32 / 41 / 5D / 240 / 180 / 145 / M6.0 / T25; 29-29.9mm / 32 / 41 / 7D / 298 / 238 / 203 / M6.0 / T25; 29-29.9mm / 32 / 41 / 10D / 385 / 325 / 290 / M6.0 / T25; 30-30.9mm / 32 / 41 / 3D / 186 / 126 / 90 / M6.0 / T25; 30-30.9mm / 32 / 41 / 5D / 246 / 186 / 150 / M6.0 / T25; 30-30.9mm / 32 / 41 / 7D / 306 / 247 / 210 / M6.0 / T25; 30-30.9mm / 32 / 41 / 10D / 396 / 336 / 300 / M6.0 / T25; 31-31.9mm / 32 / 41 / 3D / 191 / 131 / 93 / M6.0 / T25; 31-31.9mm / 32 / 41 / 5D / 253 / 193 / 155 / M6.0 / T25; 31-31.9mm / 32 / 41 / 7D / 315 / 255 / 217 / M6.0 / T25; 31-31.9mm / 32 / 41 / 10D / 408 / 348 / 310 / M6.0 / T25; 32-32.9mm / 32 / 41 / 3D / 195 / 135 / 96 / M6.0 / T25; 32-32.9mm / 32 / 41 / 5D / 259 / 199 / 160 / M6.0 / T25; 32-32.9mm / 32 / 41 / 7D / 323 / 263 / 224 / M6.0 / T25; 32-32.9mm / 32 / 41 / 10D / 419 / 359 / 320 / M6.0 / T25; 33-33.9mm / 32 / 49 / 3D / 200 / 140 / 99 / M6.0 / T25; 33-33.9mm / 32 / 49 / 5D / 266 / 206 / 165 / M6.0 / T25; 33-33.9mm / 32 / 49 / 7D / 332 / 272 / 231 / M6.0 / T25; 33-33.9mm / 32 / 49 / 10D / 431 / 371 / 330 / M6.0 / T25; 34-34.9mm / 40 / 49 / 3D / 215 / 145 / 102 / M6.0 / T25; 34-34.9mm / 40 / 49 / 5D / 283 / 213 / 170 / M6.0 / T25; 34-34.9mm / 40 / 49 / 7D / 351 / 281 / 238 / M6.0 / T25; 34-34.9mm / 40 / 49 / 10D / 453 / 383 / 340 / M6.0 / T25; 35-35.9mm / 40 / 49 / 3D / 218 / 148 / 105 / M6.0 / T25; 35-35.9mm / 40 / 49 / 5D / 288 / 218 / 175 / M6.0 / T25; 35-35.9mm / 40 / 49 / 7D / 358 / 288 / 245 / M6.0 / T25; 35-35.9mm / 40 / 49 / 10D / 463 / 393 / 350 / M6.0 / T25
REFERENCE 0307-773
Straight-flute carbide drills without internal coolant
Straight cutting edge and flat clearance form a separate 5D nominal drill direction.
- Diameter range
- 4–20 mm
- Construction
- Uncoated text; conflicting coating icon held
- Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units
- 4~4.2 / 6 / 74 / 36 / 29 / 36; 5~6 / 6 / 82 / 44 / 35 / 36; 6.8~8 / 8 / 91 / 53 / 43 / 36; 8.5~10 / 10 / 103 / 61 / 49 / 40; 10.25~12 / 12 / 118 / 71 / 56 / 45; 13~14 / 14 / 124 / 77 / 60 / 45; 15~16 / 16 / 133 / 83 / 63 / 48; 17~18 / 18 / 143 / 93 / 71 / 48; 19.5~20 / 20 / 153 / 101 / 77 / 50
REFERENCE 0307-774
Straight-flute carbide drills with internal coolant
Straight cutting edge and flat clearance form a separate 5D nominal drill direction.
- Diameter range
- 4–20 mm
- Construction
- TiAlN-coated internal-coolant direction
- Diameter / shank / overall / flute / max cutting depth / shank length — confirm drawing units
- 4~4.2 / 6 / 74 / 36 / 29 / 36; 5~6 / 6 / 82 / 44 / 35 / 36; 6.8~8 / 8 / 91 / 53 / 43 / 36; 8.5~10 / 10 / 103 / 61 / 49 / 40; 10.25~12 / 12 / 118 / 71 / 56 / 45; 13~14 / 14 / 124 / 77 / 60 / 45; 15~16 / 16 / 133 / 83 / 63 / 48; 17~18 / 18 / 143 / 93 / 71 / 48; 19.5~20 / 20 / 153 / 101 / 77 / 50
REFERENCE 0307-775
Straight-flute solid-carbide drilling tools
Straight-flute tools have separate diameter/shank and working/overall length options; confirm the selected workpiece and rotation.
- Diameter range
- 2–14 mm
- Flute options
- 2 or 3
- Rotation options
- Left or right
- Diameter / shank / cutting length / overall length — confirm drawing units
- 2 / 2 / 10 / 38; 3 / 3 / 12 / 46; 4 / 4 / 17 / 55; 5 / 5 / 20 / 62; 6 / 6 / 21 / 66; 8 / 8 / 27 / 79; 10 / 10 / 31 / 89; 12 / 12 / 35 / 102; 14 / 14 / 37 / 107
REFERENCE 0307-776
Four-flute carbon-fibre carbide drills
A four-flute straight tool is presented for composite-hole work. Confirm the actual laminate and supported cutting conditions.
- Diameter range
- 2–12.2 mm
- Flutes
- 4
- Flutes / d1 / d2 / L1 / L2 — confirm drawing units
- 4 / 2 / 2 / 15 / 150; 4 / 8.5 / 8.5 / 50 / 150; 4 / 4.2 / 4.2 / 20 / 150; 4 / 9.2 / 9.2 / 50 / 150; 4 / 10 / 10 / 50 / 150; 4 / 9.5 / 9.5 / 50 / 150; 4 / 11 / 11 / 50 / 150; 4 / 9.7 / 9.7 / 50 / 150; 4 / 11.7 / 11.7 / 50 / 150; 4 / 9.9 / 9.9 / 50 / 150; 4 / 5.2 / 5.2 / 20 / 150; 4 / 10.2 / 10.2 / 50 / 150; 4 / 5.8 / 5.8 / 20 / 150; 4 / 10.5 / 10.5 / 50 / 150; 4 / 6.5 / 6.5 / 20 / 150; 4 / 10.8 / 10.8 / 50 / 150; 4 / 7.2 / 7.2 / 20 / 150; 4 / 11.5 / 11.5 / 50 / 150; 4 / 7.5 / 7.5 / 20 / 150; 4 / 11.9 / 11.9 / 50 / 150; 4 / 7.9 / 7.9 / 50 / 150; 4 / 12 / 12 / 50 / 150; 4 / 8.2 / 8.2 / 50 / 150; 4 / 12.2 / 12.2 / 50 / 150
REFERENCE 0307-777
Undercut PCB microdrills
An undercut/spade-form carbide direction addresses FR-4 and high-Tg multilayer boards.
- Diameter range
- 0.25–1.2 mm
- Drawing reference
- Overall 38.20 / shank Ø3.175; confirm units and approved drawing
- Diameter / flute length (mm)
- 0.25 / 4; 0.75 / 8.5; 0.3 / 5.5; 0.8 / 8.5; 0.35 / 6.5; 0.85 / 8.5; 0.4 / 7; 0.9 / 8.5; 0.45 / 7; 0.95 / 8.5; 0.5 / 8.5; 1 / 8.5; 0.55 / 8.5; 1.05 / 8.5; 0.6 / 8.5; 1.1 / 8.5; 0.65 / 8.5; 1.15 / 8.5; 0.7 / 8.5; 1.2 / 8.5
REFERENCE 0307-778
Standard PCB carbide microdrills
A standard microdrill direction is described for phenolic, epoxy and FR-4 board; regrinding suitability requires the actual tool condition.
- Diameter range
- 0.1–3.175 mm
- Drawing reference
- Overall 38.20 / shank Ø3.175; confirm units and approved drawing
- Diameter / flute length (mm)
- 0.1 / 1.2; 1.15 / 10.5; 2.2 / 10.5; 0.15 / 2; 1.2 / 10.5; 2.25 / 10.5; 0.2 / 3.5; 1.25 / 10.5; 2.3 / 10.5; 0.25 / 5; 1.3 / 10.5; 2.35 / 10.5; 0.3 / 5.5; 1.35 / 10.5; 2.4 / 10.5; 0.35 / 6.5; 1.4 / 10.5; 2.45 / 10.5; 0.4 / 7; 1.45 / 10.5; 2.5 / 10.5; 0.45 / 7; 1.5 / 10.5; 2.55 / 10.5; 0.5 / 8.5; 1.55 / 10.5; 2.6 / 10.5; 0.55 / 8.5; 1.6 / 10.5; 2.65 / 10.5; 0.6 / 9.5; 1.65 / 10.5; 2.7 / 10.5; 0.65 / 9.5; 1.7 / 10.5; 2.75 / 10.5; 0.7 / 9.5; 1.75 / 10.5; 2.8 / 10.5; 0.75 / 9.5; 1.8 / 10.5; 2.85 / 10.5; 0.8 / 9.5; 1.85 / 10.5; 2.9 / 10.5; 0.85 / 9.5; 1.9 / 10.5; 2.95 / 10.5; 0.9 / 9.5; 1.95 / 10.5; 3 / 10.5; 0.95 / 9.5; 2 / 10.5; 3.05 / 10.5; 1 / 10.5; 2.05 / 10.5; 3.1 / 10.5; 1.05 / 10.5; 2.1 / 10.5; 3.15 / 10.5; 1.1 / 10.5; 2.15 / 10.5; 3.175 / 10.5
REFERENCE 0307-779
Micro carbide slot drills
A small-diameter carbide direction addresses elongated slots and circular milling.
- Diameter range
- 0.5–2 mm
- Drawing reference
- Overall 38.20 / shank Ø3.175; confirm units and approved drawing
- Diameter / flute length (mm)
- 0.5 / 5; 1.3 / 8.5; 0.55 / 5; 1.35 / 8.5; 0.6 / 7; 1.4 / 8.5; 0.65 / 7; 1.45 / 8.5; 0.7 / 8.5; 1.5 / 8.5; 0.75 / 8.5; 1.55 / 8.5; 0.8 / 8.5; 1.6 / 8.5; 0.85 / 8.5; 1.65 / 8.5; 0.9 / 8.5; 1.7 / 8.5; 0.95 / 8.5; 1.75 / 8.5; 1 / 8.5; 1.8 / 8.5; 1.05 / 8.5; 1.85 / 8.5; 1.1 / 8.5; 1.9 / 8.5; 1.15 / 8.5; 1.95 / 8.5; 1.2 / 8.5; 2 / 8.5
REFERENCE 0307-780
Two-step solid-carbide drills
A two-diameter drill combines separate first and second cutting lengths. Confirm helix, rotation and hole/step relationship.
- Rotation
- Left/right directions
- Helix options
- 30° or 40°
- D1 / D2 / shank / FL1 / FL2 / overall — confirm drawing units
- 3.3 / 4.5 / 6 / 11.4 / 28 / 66; 4.2 / 6 / 6 / 13.6 / 28 / 66; 5 / 7 / 8 / 16.5 / 41 / 79; 6.75 / 9.5 / 10 / 21 / 47 / 89; 8.5 / 12 / 12 / 25.5 / 55 / 102; 10.25 / 14 / 14 / 30 / 60 / 107
REFERENCE 0307-781
Twist-flute solid-carbide drills
A twist-flute carbide direction includes two/three-flute and left/right rotation options.
- Diameter range
- 2–12 mm
- Helix options
- 20°, 30°, 45°
- Diameter / shank / cutting length / overall — confirm drawing units
- 2 / 2 / 12 / 38; 3 / 3 / 16 / 46; 4 / 4 / 22 / 55; 5 / 5 / 26 / 62; 6 / 6 / 28 / 66; 7 / 7 / 34 / 74; 8 / 8 / 37 / 79; 9 / 9 / 40 / 84; 10 / 10 / 43 / 89; 11 / 11 / 47 / 95; 12 / 12 / 51 / 102
REFERENCE 0307-782
Coated solid-carbide spotting drills
Coated spotting tools use straight cutting edges and relieved clearance. Select the actual point angle for the operation.
- Diameter range
- 5–20 mm
- Point directions
- 90° or 120°
- Diameter / shank / overall / flute — confirm drawing units
- 5 / 5 / 62 / 10; 6 / 6 / 66 / 15; 8 / 8 / 79 / 17; 10 / 10 / 89 / 20; 12 / 12 / 102 / 25; 14 / 14 / 107 / 30; 16 / 16 / 115 / 35; 20 / 20 / 131 / 40
REFERENCE 0307-783
Three-flute solid-carbide drills
A coated three-flute direction uses straight cutting edges and flat clearance.
- Diameter range
- 3–20 mm
- Flutes
- 3
- Point reference
- 150°
- Diameter / shank / overall / flute / max cutting depth — confirm drawing units
- 3 / 3 / 46 / 16 / 12; 3.1 / 3.1 / 49 / 18 / 14; 3.2 / 3.2 / 49 / 18 / 14; 3.3 / 3.3 / 49 / 18 / 14; 3.4 / 3.4 / 52 / 20 / 15; 3.5 / 3.5 / 52 / 20 / 15; 3.6 / 3.6 / 52 / 20 / 15; 3.7 / 3.7 / 52 / 20 / 15; 3.8 / 3.8 / 55 / 22 / 17; 4 / 4 / 55 / 22 / 17; 4.1 / 4.1 / 55 / 22 / 17; 4.2 / 4.2 / 55 / 22 / 17; 4.5 / 4.5 / 58 / 24 / 18; 4.8 / 4.8 / 62 / 26 / 20; 5 / 5 / 62 / 26 / 20; 5.1 / 5.1 / 62 / 26 / 20; 5.2 / 5.2 / 62 / 26 / 20; 5.3 / 5.3 / 62 / 26 / 20; 5.5 / 5.5 / 66 / 28 / 21; 5.8 / 5.8 / 66 / 28 / 21; 6 / 6 / 66 / 28 / 21; 6.1 / 6.1 / 70 / 31 / 23; 6.2 / 6.2 / 70 / 31 / 23; 6.4 / 6.4 / 70 / 31 / 23; 6.5 / 6.5 / 70 / 31 / 23; 6.7 / 6.7 / 70 / 31 / 23; 6.8 / 6.8 / 74 / 34 / 25; 7 / 7 / 74 / 34 / 25; 7.1 / 7.1 / 74 / 34 / 25; 7.4 / 7.4 / 74 / 34 / 25; 7.5 / 7.5 / 74 / 34 / 25; 7.8 / 7.8 / 79 / 37 / 27; 8 / 8 / 79 / 37 / 27; 8.1 / 8.1 / 79 / 37 / 27; 8.2 / 8.2 / 79 / 37 / 27; 8.4 / 8.4 / 79 / 37 / 27; 8.5 / 8.5 / 79 / 37 / 27; 8.6 / 8.6 / 84 / 40 / 29; 8.7 / 8.7 / 84 / 40 / 29; 8.8 / 8.8 / 84 / 40 / 29; 9 / 9 / 84 / 40 / 29; 9.5 / 9.5 / 84 / 40 / 29; 9.8 / 9.8 / 89 / 43 / 31; 10 / 10 / 89 / 43 / 31; 10.1 / 10.1 / 89 / 43 / 31; 10.2 / 10.2 / 89 / 43 / 31; 10.4 / 10.4 / 89 / 43 / 31; 10.5 / 10.5 / 89 / 43 / 31; 11 / 11 / 95 / 47 / 33; 12 / 12 / 102 / 51 / 35; 13 / 13 / 102 / 51 / 35; 14 / 14 / 107 / 54 / 37; 15 / 15 / 111 / 54 / 37; 17.5 / 17.5 / 123 / 62 / 40; 19.5 / 19.5 / 131 / 66 / 42; 20 / 20 / 131 / 66 / 42
REFERENCE 0307-784
General four-flute square carbide end mills
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and square end define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Submicron carbide, composite coating, passivated curved edge and positive-rake construction
- Flutes
- 4
- Helix
- 35°
- Shank tolerance
- h6
- Diameter / cutting length / overall / shank / outer-diameter tolerance (mm)
- 1 / 3 / 50 / 4 / 0 to -0.015; 1.5 / 5 / 50 / 4 / 0 to -0.015; 2 / 6 / 50 / 4 / 0 to -0.015; 2.5 / 8 / 50 / 4 / 0 to -0.015; 3 / 9 / 50 / 4 / 0 to -0.015; 3.5 / 11 / 50 / 4 / 0 to -0.015; 4 / 12 / 50 / 4 / 0 to -0.015; 5 / 13 / 50 / 6 / 0 to -0.015; 6 / 15 / 50 / 6 / 0 to -0.015; 8 / 20 / 60 / 8 / 0 to -0.015; 10 / 25 / 75 / 10 / 0 to -0.015; 12 / 30 / 75 / 12 / 0 to -0.015; 14 / 35 / 100 / 14 / 0 to -0.025; 16 / 45 / 100 / 16 / 0 to -0.025; 18 / 50 / 100 / 18 / 0 to -0.025; 20 / 50 / 100 / 20 / 0 to -0.025
REFERENCE 0307-785
Extended general four-flute square end mills
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and square end define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Submicron carbide and composite coating
- Flutes
- 4
- Helix
- 35°
- Shank tolerance
- h6
- Diameter / cutting length / overall / shank / outer-diameter tolerance (mm)
- 4 / 16 / 75 / 4 / 0 to -0.015; 6 / 25 / 75 / 6 / 0 to -0.015; 8 / 32 / 75 / 8 / 0 to -0.015; 8 / 32 / 100 / 8 / 0 to -0.015; 10 / 40 / 100 / 10 / 0 to -0.015; 12 / 60 / 150 / 12 / 0 to -0.015
REFERENCE 0307-786
General two-flute ball-nose carbide mills
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and ball end define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Submicron carbide and composite coating
- Flutes
- 2
- Helix
- 30°
- Shank tolerance
- h6
- Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm)
- 1 / 2 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 1.5 / 3 / 0.75 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2 / 4 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2.5 / 5 / 1.25 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 6 / 1.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 8 / 2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 10 / 2.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 14 / 28 / 7 / 14 / 100 / 0 to -0.020 / 0 to -0.030; 16 / 32 / 8 / 16 / 100 / 0 to -0.020 / 0 to -0.030
REFERENCE 0307-787
Extended general ball-nose carbide mills
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and ball end define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Ultra-fine carbide and composite coating
- Flutes
- 2
- Helix
- 30°
- Shank tolerance
- h6
- Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm)
- 4 / 8 / 2 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 150 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 150 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 150 / 0 to -0.015 / 0 to -0.020
REFERENCE 0307-788
General corner-radius carbide mills
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and corner radius define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Submicron carbide and composite coating
- Flutes
- 4
- Helix
- 35°
- Shank tolerance
- h6
- Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm)
- 1 / 3 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 1.5 / 4 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2 / 6 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2 / 6 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 8 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 12 / 0.2 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 12 / 0.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 12 / 1 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 16 / 0.2 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 16 / 0.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 16 / 1 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.2 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.5 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 1 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 0.5 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 1 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 0.5 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 1 / 12 / 75 / 0 to -0.015 / 0 to -0.020
REFERENCE 0307-789
Extended general corner-radius mills
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and corner radius define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Submicron carbide and composite coating
- Flutes
- 4
- Helix
- 35°
- Shank tolerance
- h6
- Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm)
- 4 / 10 / 0.5 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 1 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 16 / 0.5 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 16 / 1 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.5 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 1 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 4 / 11 / 0.5 / 4 / 100 / 0 to -0.015 / 0 to -0.020; 6 / 16 / 0.5 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 6 / 16 / 1 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.5 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 1 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 0.5 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 1 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 0.5 / 12 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 1 / 12 / 100 / 0 to -0.015 / 0 to -0.020
REFERENCE 0307-790
Variable-pitch four-flute square carbide mills
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and square end define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Ultra-fine carbide, passivated curved edge, unequal spacing and composite coating
- Flutes
- 4
- Helix
- 45°
- Shank tolerance
- h6
- Diameter / cutting length / overall / shank / outer-diameter tolerance (mm)
- 1 / 3 / 50 / 4 / 0 to -0.015; 1.5 / 5 / 50 / 4 / 0 to -0.015; 2 / 6 / 50 / 4 / 0 to -0.015; 2.5 / 8 / 50 / 4 / 0 to -0.015; 3 / 9 / 50 / 4 / 0 to -0.015; 3.5 / 11 / 50 / 4 / 0 to -0.015; 4 / 12 / 50 / 4 / 0 to -0.015; 5 / 13 / 50 / 6 / 0 to -0.015; 6 / 15 / 50 / 6 / 0 to -0.015; 8 / 20 / 60 / 8 / 0 to -0.015; 10 / 25 / 75 / 10 / 0 to -0.015; 12 / 30 / 75 / 12 / 0 to -0.015; 14 / 35 / 100 / 14 / 0 to -0.020; 16 / 45 / 100 / 16 / 0 to -0.020
REFERENCE 0307-791
Extended variable-pitch square carbide mills
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and square end define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Ultra-fine carbide, unequal spacing and composite coating
- Flutes
- 4
- Helix
- 45°
- Shank tolerance
- h6
- Diameter / cutting length / overall / shank / outer-diameter tolerance (mm)
- 4 / 16 / 75 / 4 / 0 to -0.015; 4 / 20 / 100 / 4 / 0 to -0.015; 5 / 20 / 75 / 6 / 0 to -0.015; 6 / 25 / 75 / 6 / 0 to -0.015; 6 / 30 / 100 / 6 / 0 to -0.015; 8 / 32 / 75 / 8 / 0 to -0.015; 8 / 32 / 100 / 8 / 0 to -0.015; 10 / 40 / 100 / 10 / 0 to -0.015; 10 / 50 / 150 / 10 / 0 to -0.015; 12 / 50 / 100 / 12 / 0 to -0.015; 12 / 60 / 150 / 12 / 0 to -0.015
REFERENCE 0307-792
Ultra-fine-carbide two-flute ball mills
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and ball end define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Ultra-fine carbide and composite coating
- Flutes
- 2
- Helix
- 30°
- Shank tolerance
- h6
- Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm)
- 1 / 2 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 1.5 / 3 / 0.75 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2 / 4 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2.5 / 5 / 1.25 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 6 / 1.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 8 / 2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 10 / 2.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 14 / 28 / 7 / 14 / 100 / 0 to -0.020 / 0 to -0.030; 16 / 32 / 8 / 16 / 100 / 0 to -0.020 / 0 to -0.030
REFERENCE 0307-793
Extended ultra-fine-carbide ball mills
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and ball end define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Ultra-fine carbide and composite coating
- Flutes
- 2
- Helix
- 30°
- Shank tolerance
- h6
- Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm)
- 4 / 8 / 2 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 150 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 150 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 150 / 0 to -0.015 / 0 to -0.020
REFERENCE 0307-794
Ultra-fine-carbide corner-radius mills
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and corner radius define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Ultra-fine carbide and composite coating
- Flutes
- 4
- Helix
- 45°
- Shank tolerance
- h6
- Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm)
- 1 / 3 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 1.5 / 4 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2 / 5 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2.5 / 7 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2.5 / 7 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 8 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 8 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 8 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 13 / 0.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 13 / 1 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 0.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 1 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.5 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 1 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 0.5 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 1 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 0.5 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 1 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 16 / 45 / 0.5 / 16 / 100 / 0 to -0.020 / 0 to -0.030
REFERENCE 0307-795
Extended ultra-fine-carbide radius mills
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and corner radius define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Ultra-fine carbide and composite coating
- Flutes
- 4
- Helix
- 45°
- Shank tolerance
- h6
- Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm)
- 4 / 10 / 0.5 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 4 / 20 / 0.5 / 4 / 100 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 1 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 4 / 20 / 1 / 4 / 100 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 0.5 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 24 / 0.5 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 1 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 24 / 1 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.5 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 32 / 0.5 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 1 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 32 / 1 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 0.5 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 1 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 0.5 / 12 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 1 / 12 / 100 / 0 to -0.015 / 0 to -0.020
REFERENCE 0307-796
Three-flute aluminium square mills
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and square end define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Submicron carbide, large chip pockets and polished/passivated edges; no coating shown
- Flutes
- 3
- Helix
- 45°
- Shank tolerance
- h6
- Diameter / cutting length / overall / shank / outer-diameter tolerance (mm)
- 1 / 3 / 50 / 4 / 0 to -0.015; 1.5 / 4.5 / 50 / 4 / 0 to -0.015; 2 / 6 / 50 / 4 / 0 to -0.015; 2.5 / 7.5 / 50 / 4 / 0 to -0.015; 3 / 9 / 50 / 3 / 0 to -0.015; 3 / 9 / 50 / 4 / 0 to -0.015; 3.5 / 10.5 / 50 / 4 / 0 to -0.015; 4 / 12 / 50 / 4 / 0 to -0.015; 5 / 15 / 50 / 5 / 0 to -0.015; 5 / 15 / 50 / 6 / 0 to -0.015; 6 / 18 / 50 / 6 / 0 to -0.015; 8 / 24 / 60 / 8 / 0 to -0.015; 10 / 30 / 75 / 10 / 0 to -0.015; 12 / 36 / 75 / 12 / 0 to -0.015; 14 / 45 / 100 / 14 / 0 to -0.020; 16 / 50 / 100 / 16 / 0 to -0.020
REFERENCE 0307-797
Extended three-flute aluminium mills
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and square end define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Submicron carbide with large chip pockets and polished edge direction
- Flutes
- 3
- Helix
- 45°
- Shank tolerance
- h6
- Diameter / cutting length / overall / shank / outer-diameter tolerance (mm)
- 3 / 12 / 75 / 3 / 0 to -0.015; 4 / 15 / 75 / 4 / 0 to -0.015; 6 / 20 / 75 / 6 / 0 to -0.015; 8 / 25 / 75 / 8 / 0 to -0.015; 4 / 16 / 100 / 4 / 0 to -0.015; 6 / 25 / 100 / 6 / 0 to -0.015; 8 / 32 / 100 / 8 / 0 to -0.015; 10 / 45 / 100 / 10 / 0 to -0.020; 12 / 55 / 100 / 12 / 0 to -0.020
REFERENCE 0307-798
Four-flute carbide square mills for hardened workpieces
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and square end define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Super-micrograin carbide, treated cutting edge and nano-layer coating
- Flutes
- 4
- Helix
- 45°
- Shank tolerance
- h6
- Diameter / cutting length / overall / shank / outer-diameter tolerance (mm)
- 1 / 3 / 50 / 4 / 0 to -0.015; 1.5 / 4 / 50 / 4 / 0 to -0.015; 2 / 6 / 50 / 4 / 0 to -0.015; 2.5 / 8 / 50 / 4 / 0 to -0.015; 3 / 8 / 50 / 4 / 0 to -0.015; 3.5 / 10 / 50 / 4 / 0 to -0.015; 4 / 11 / 50 / 4 / 0 to -0.015; 5 / 13 / 50 / 6 / 0 to -0.015; 6 / 16 / 50 / 6 / 0 to -0.015; 8 / 20 / 60 / 8 / 0 to -0.015; 10 / 25 / 75 / 10 / 0 to -0.015; 12 / 30 / 75 / 12 / 0 to -0.015; 14 / 35 / 100 / 14 / 0 to -0.020; 16 / 45 / 100 / 16 / 0 to -0.020
REFERENCE 0307-799
Extended carbide square mills for hardened workpieces
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and square end define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Super-micrograin carbide and nano-layer coating
- Flutes
- 4
- Helix
- 45°
- Shank tolerance
- h6
- Diameter / cutting length / overall / shank / outer-diameter tolerance (mm)
- 4 / 16 / 75 / 4 / 0 to -0.015; 4 / 20 / 100 / 4 / 0 to -0.015; 5 / 20 / 75 / 6 / 0 to -0.015; 6 / 25 / 75 / 6 / 0 to -0.015; 6 / 30 / 100 / 6 / 0 to -0.015; 8 / 32 / 75 / 8 / 0 to -0.015; 8 / 32 / 100 / 8 / 0 to -0.015; 10 / 40 / 100 / 10 / 0 to -0.015; 10 / 50 / 150 / 10 / 0 to -0.015; 12 / 50 / 100 / 12 / 0 to -0.015; 12 / 60 / 150 / 12 / 0 to -0.015
REFERENCE 0307-800
Two-flute carbide ball mills for hardened workpieces
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and ball end define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Super-micrograin carbide and nano-layer coating
- Flutes
- 2
- Helix
- 35°
- Shank tolerance
- h6
- Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm)
- 1 / 2 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 1.5 / 3 / 0.75 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2 / 4 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2.5 / 5 / 1.25 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 6 / 1.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 8 / 2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 10 / 2.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 14 / 28 / 7 / 14 / 100 / 0 to -0.020 / 0 to -0.030; 16 / 32 / 8 / 16 / 100 / 0 to -0.020 / 0 to -0.030
REFERENCE 0307-801
Extended carbide ball mills for hardened workpieces
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and ball end define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Super-micrograin carbide and nano-layer coating
- Flutes
- 2
- Helix
- 35°
- Shank tolerance
- h6
- Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm)
- 4 / 8 / 2 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 12 / 3 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 16 / 4 / 8 / 150 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 20 / 5 / 10 / 150 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 24 / 6 / 12 / 150 / 0 to -0.015 / 0 to -0.020
REFERENCE 0307-802
Carbide radius mills for hardened workpieces
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and corner radius define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Super-micrograin carbide and nano-layer coating
- Flutes
- 4
- Helix
- 45°
- Shank tolerance
- h6
- Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm)
- 1 / 3 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 1.5 / 4 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2 / 5 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2.5 / 7 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 2.5 / 7 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 8 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 8 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 3 / 8 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 0.2 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 0.5 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 1 / 4 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 13 / 0.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 5 / 13 / 1 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 0.5 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 1 / 6 / 50 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.5 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 1 / 8 / 60 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 0.5 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 1 / 10 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 0.5 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 1 / 12 / 75 / 0 to -0.015 / 0 to -0.020; 16 / 45 / 0.5 / 16 / 100 / 0 to -0.020 / 0 to -0.030
REFERENCE 0307-803
Extended carbide radius mills for hardened workpieces
Keep the actual diameter, cutting length, shank and total length paired. The substrate, edge treatment and corner radius define a distinct selection; confirm workpiece hardness, holder and trial conditions.
- Material / construction
- Super-micrograin carbide and nano-layer coating
- Flutes
- 4
- Helix
- 45°
- Shank tolerance
- h6
- Diameter / cutting length / radius / shank / overall / arc accuracy / outer-diameter tolerance (mm)
- 4 / 10 / 0.5 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 4 / 20 / 0.5 / 4 / 100 / 0 to -0.015 / 0 to -0.020; 4 / 10 / 1 / 4 / 75 / 0 to -0.015 / 0 to -0.020; 4 / 20 / 1 / 4 / 100 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 0.5 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 24 / 0.5 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 6 / 15 / 1 / 6 / 75 / 0 to -0.015 / 0 to -0.020; 6 / 24 / 1 / 6 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 0.5 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 32 / 0.5 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 8 / 20 / 1 / 8 / 75 / 0 to -0.015 / 0 to -0.020; 8 / 32 / 1 / 8 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 0.5 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 10 / 25 / 1 / 10 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 0.5 / 12 / 100 / 0 to -0.015 / 0 to -0.020; 12 / 30 / 1 / 12 / 100 / 0 to -0.015 / 0 to -0.020
REFERENCE 0307-804
General solid-carbide drills without internal coolant
Two-flute carbide drills can be selected by workpiece and actual hole depth; non-standard geometry can be quoted against a drawing.
- Diameter
- 3–20 mm
- Depth classes
- 3D, 5D, 8D, 12D
- Point angle
- 140°
- Diameter / shank tolerances
- m7 / h6
- Geometry references
- DIN 6537 and DIN 6535; confirm the ordered form
REFERENCE 0307-805
Indexable carbide-head drilling systems
A high-alloy-steel holder and rear retention arrangement support replaceable cutting heads. Match the head and holder as an assembly.
- Standard head diameter
- 16–32 mm
- Non-standard diameter direction
- 12.5–42 mm, drawing approval required
- Nominal length classes
- 3D, 5D, 7D, 8D, 10D, 12D
- Point angle
- 140°
REFERENCE 0307-806
U-drills, deep-hole holders and matching accessories
Coordinate the holder, inserts, retaining screw and wrench for one drilling setup. Actual hole depth, coolant and machine interface govern selection.
- Working-depth classes
- 2D, 3D, 4D, 5D
- Deep-hole classes
- 5D, 6.5D, 8D
- Universal holder classes
- 2.25D, 3.25D; 2.5D, 3.5D
REFERENCE 0307-807
Cobalt-HSS and powder-metal end mills
Passivated cutting edges and substrate/coating choices provide another milling direction alongside solid carbide.
- Diameter
- 1–25 mm
- Flute choices
- 2, 3 or 4
- Substrate directions
- Cobalt-bearing HSS and powder-metal HSS
- Custom geometry
- Workpiece-specific drawing review
REFERENCE 0307-808
Multi-flute ball-nose carbide mills
Solid-carbide construction with a curved relief edge. Quote the exact end shape, workpiece material and approved geometry rather than treating the diameter range as a stock promise.
- Diameter
- 1–20 mm
- Flutes
- 2 or 4
- Diameter tolerance
- 0 to -0.018 mm
- Shank tolerance
- h6
- Helix
- 45°
REFERENCE 0307-809
Tapered ball-nose carbide mills
Solid-carbide construction with a curved relief edge. Quote the exact end shape, workpiece material and approved geometry rather than treating the diameter range as a stock promise.
- Diameter
- 4–10 mm
- Flutes
- 2 or 4
- Diameter tolerance
- 0 to -0.018 mm
- Shank tolerance
- h6
REFERENCE 0307-810
Multi-flute flat-end carbide mills
Solid-carbide construction with a curved relief edge. Quote the exact end shape, workpiece material and approved geometry rather than treating the diameter range as a stock promise.
- Diameter
- 1–20 mm
- Flutes
- 2 or 4
- Diameter tolerance
- 0 to -0.018 mm
- Shank tolerance
- h6
REFERENCE 0307-811
Corner-nose carbide mills
Solid-carbide construction with a curved relief edge. Quote the exact end shape, workpiece material and approved geometry rather than treating the diameter range as a stock promise.
- Diameter
- 1–20 mm
- Flutes
- 2 or 4
- Diameter tolerance
- 0 to -0.018 mm
- Shank tolerance
- h6
REFERENCE 0307-812
Multi-edge roughing carbide mills
Solid-carbide construction with a curved relief edge. Quote the exact end shape, workpiece material and approved geometry rather than treating the diameter range as a stock promise.
- Diameter
- 4–32 mm
- Flutes
- 5, 6 or 8
- Diameter tolerance
- 0 to -0.018 mm
- Shank tolerance
- h6
REFERENCE 0307-813
Micro-diameter carbide mills
Solid-carbide construction with a curved relief edge. Quote the exact end shape, workpiece material and approved geometry rather than treating the diameter range as a stock promise.
- Diameter
- 0.2–0.9 mm
- Flutes
- 2
- Diameter tolerance
- 0 to -0.018 mm
- Shank tolerance
- h6
- Helix
- 35°
- End directions
- Protected end or ball nose
REFERENCE 0307-814
Solid-carbide forming taps with internal coolant
A forming direction for aluminium, magnesium, copper, cast-aluminium and cast-zinc alloys. Select the coating and lead chamfer for the actual thread; extended shanks and alternative tolerances require drawing confirmation.
- Thread endpoints
- M4×0.7–M30×2 (metric designation)
- Tolerance direction
- 6HX
- Coolant direction
- Internal coolant
- Configuration
- Extended-shank and special chamfer options by approved drawing
REFERENCE 0307-815
Solid-carbide forming taps
A forming direction for aluminium, magnesium, copper, cast-aluminium and cast-zinc alloys. Select the coating and lead chamfer for the actual thread; extended shanks and alternative tolerances require drawing confirmation.
- Thread endpoints
- M0.8×0.2–M32×2.5 (metric designation)
- Tolerance direction
- 6H
- Coolant direction
- No internal-coolant feature specified
- Configuration
- Extended-shank and special chamfer options by approved drawing
REFERENCE 0307-816
Solid-carbide spiral-flute cutting taps with internal coolant
A spiral-flute cutting direction for aluminium, magnesium, copper, cast-aluminium and cast-zinc alloys. Select the coating and lead chamfer for the actual thread; extended shanks and alternative tolerances require drawing confirmation.
- Thread endpoints
- M4×0.7–M30×3.5 (metric designation)
- Tolerance direction
- 6HX
- Coolant direction
- Internal coolant
- Configuration
- Extended-shank and special chamfer options by approved drawing
REFERENCE 0307-817
Solid-carbide spiral-flute cutting taps
A spiral-flute cutting direction for aluminium, magnesium, copper, cast-aluminium and cast-zinc alloys. Select the coating and lead chamfer for the actual thread; extended shanks and alternative tolerances require drawing confirmation.
- Thread endpoints
- M4×0.7–M30×3.5 (metric designation)
- Tolerance direction
- 6HX
- Coolant direction
- No internal-coolant feature specified
- Configuration
- Extended-shank and special chamfer options by approved drawing
REFERENCE 0307-818
Solid-carbide straight-flute cutting taps with internal coolant
A straight-flute cutting direction for aluminium, magnesium, copper, cast-aluminium and cast-zinc alloys. Select the coating and lead chamfer for the actual thread; extended shanks and alternative tolerances require drawing confirmation.
- Thread endpoints
- M5×0.8–M30×3.5 (metric designation)
- Tolerance direction
- 6HX
- Coolant direction
- Internal coolant
- Configuration
- Extended-shank and special chamfer options by approved drawing
REFERENCE 0307-819
Solid-carbide straight-flute cutting taps
A straight-flute cutting direction for grey and ductile cast iron. Select the coating and lead chamfer for the actual thread; extended shanks and alternative tolerances require drawing confirmation.
- Thread endpoints
- M5×0.8–M30×3.5 (metric designation)
- Tolerance direction
- 6HX
- Coolant direction
- No internal-coolant feature specified
- Configuration
- Extended-shank and special chamfer options by approved drawing
REFERENCE 0307-820
Solid-carbide thread mills
A separate thread-milling route for the agreed hole and material. Match thread depth, milling path and machine requirements.
- Nominal thread range
- M0.6–M30
- Profile angle
- 60°
REFERENCE 0307-821
Large HSS round and hexagonal dies
Round and hexagonal die forms can be specified for the required thread and workpiece; customized cutting geometry is subject to review.
- Metric thread range
- M8–M66
REFERENCE 0307-822
Left-helix solid-carbide reamers
Choose the helix direction for the hole and chip evacuation arrangement, with the actual reaming allowance and holder confirmed.
- Diameter
- 3–16 mm
- Flutes
- 6
- Helix
- 7°
- Cutting diameter / shank tolerances
- h7 / h6
REFERENCE 0307-823
Right-helix solid-carbide reamers
Choose the helix direction for the hole and chip evacuation arrangement, with the actual reaming allowance and holder confirmed.
- Diameter
- 3–16 mm
- Flutes
- 6
- Helix
- 7°
- Cutting diameter / shank tolerances
- h7 / h6
REFERENCE 0307-824
Threaded-interface carbide drills
A threaded rear interface for the selected drilling/finishing assembly. Establish the joint, workpiece and approved diameter before quotation.
- Diameter
- 3.18–10.72 mm
- Interface
- 1/4-28 UNF
- Diameter tolerance
- h7
- Point-angle icon
- 135°
REFERENCE 0307-825
Threaded-interface carbide reamers
A threaded rear interface for the selected drilling/finishing assembly. Establish the joint, workpiece and approved diameter before quotation.
- Diameter
- 3.18–10.72 mm
- Interface
- 1/4-28 UNF
- Diameter tolerance
- h7
REFERENCE 0307-826
Solid-carbide two-flute countersinks
Countersinking tools with a threaded rear interface. Confirm the pilot, included angle and fastener drawing for the actual assembly.
- Cutting diameter
- 11.1–25.4 mm
- Flutes
- 2
- Interface
- 1/4-28 UNF
REFERENCE 0307-827
PCD two-flute countersinks
Countersinking tools with a threaded rear interface. Confirm the pilot, included angle and fastener drawing for the actual assembly.
- Cutting diameter
- 11.1–25.4 mm
- Flutes
- 2
- Interface
- 1/4-28 UNF
REFERENCE 0307-828
Diamond-coated fine-tooth carbide routers
A fine-tooth diamond-coated rotary tool direction for CFRP machining. Confirm laminate, dust extraction and the actual edge geometry.
- Diameter
- 4–12 mm
- Shank tolerance
- h6
REFERENCE 0307-829
Carbide rotary cutting heads for composite profiling
A toothed rotary-head direction for CFRP workpieces. Confirm the exact cutting-head drawing and operation before ordering.
- Diameter
- 12.7–76.2 mm
- Shank tolerance
- h6
REFERENCE 0307-830
Straight-flute carbide bits for carbon-fibre composites
A two-flute carbide direction for CFRP drilling, with the entry/exit support and actual laminate specified.
- Diameter
- 2.49–12.7 mm
- Flutes
- 2
REFERENCE 0307-831
Tapered-flute carbide bits for carbon-fibre composites
A two-flute carbide direction for CFRP drilling, with the entry/exit support and actual laminate specified.
- Diameter
- 2.49–12.7 mm
- Flutes
- 2
REFERENCE 0307-832
Coated carbide and cermet cold-saw blades
Separate cermet/black-coated and carbide-coated stainless-steel cutting directions can be selected for a metal sawing setup.
- Diameter
- 250–730 mm
- Construction directions
- Cermet/black-coated; carbide-coated
- Customization
- Workpiece-specific tooth and blade geometry by drawing
REFERENCE 0307-833
Cermet-tooth manual cold-saw blades
A cermet-tooth direction for selected steel profiles, bar, copper and aluminium cutting. Match tooth pitch and blade speed to the actual machine.
- Diameter
- 255–405 mm
REFERENCE 0307-834
Solid-carbide slitting saws
A slitting direction for brittle short-chipping materials and thin-walled profiles. Select tooth geometry, width and bore against the actual workpiece.
- Diameter
- 5–160 mm
- Tooth-form directions
- Three distinct illustrated profiles; confirm drawing
REFERENCE 0307-835
Custom aluminium step-forming finishing cutters
Ultra-fine carbide, precision grinding and microscopic edge passivation form a stepped profile-cutting direction. Tool geometry and vibration requirements are reviewed against the part drawing.
- Configuration
- Non-standard stepped form by drawing
REFERENCE 0307-836
CVD-coated carbide inserts for steel finishing
Gradient carbide with fine aluminium-oxide and MT-TiCN coating, selected for steel/alloy-steel finishing under a stable cut.
- Substrate / coating
- Gradient carbide / Al2O3 and MT-TiCN
REFERENCE 0307-837
CVD-coated inserts for cast iron
Micrograin carbide with MT-TiCN and thick aluminium-oxide layers and an edge post-treatment. Select for grey/ductile-iron finishing or semi-finishing under continuous or lightly interrupted cutting.
- Substrate / coating
- Micrograin carbide / MT-TiCN and Al2O3
REFERENCE 0307-838
PVD-coated inserts for stainless steel
High-cobalt micrograin carbide with a TiAlN coating direction for stainless-steel semi-finishing or general threading.
- Substrate / coating
- High-cobalt micrograin carbide / TiAlN
REFERENCE 0307-839
Parting and grooving insert systems
Pair the insert and holder for turning and parting; select groove width against the component drawing.
- General groove width
- 2–8 mm
- Precision groove width
- 3–6 mm
REFERENCE 0307-840
Internal and external threading inserts
Full and partial profiles support different metric and inch thread families; confirm the insert hand, holder and complete thread designation.
- ISO metric 60° pitch
- 1–5 mm
- Partial 60° pitch
- 0.5–5 mm
- Partial 55° pitch
- 5–48 TPI
- UN
- 8–24 TPI
- Whitworth
- 11–19 TPI
- NPT
- 8–27 TPI
- BSPT
- 11–28 TPI
- Round profile, DIN 405
- 4–10 TPI
REFERENCE 0307-841
Rough-turning carbide insert profiles
Distinct chipbreaker/edge directions are illustrated for stainless steel, carbon/cast/alloy steel, and heavy cast-iron cutting; a no-chipbreaker cast-iron direction is also shown.
- Profiles
- Square, diamond, triangular and trigon directions; exact geometry by holder/drawing
REFERENCE 0307-842
PCBN and PCD turning insert directions
Positive and negative turning geometries are offered in PCBN and PCD directions. Quote the required edge preparation and work material rather than assuming interchangeability.
- Materials
- PCBN or PCD
- Geometry directions
- Positive and negative
REFERENCE 0307-843
PVD coating coordination for cutting tools, dies and components
Coordinate single-layer or composite PVD treatment for shank tools, inserts, hobs, forming/plastic/casting dies and selected friction components. Final substrate, heat treatment and dimensional allowance need an approved process specification.
- Coating chemistry directions
- TiN, TiAlN, carbon-based, silicon-based and AlCr-based
- Layer directions
- Monolayer, top-treated and multilayer
- Colour directions
- Gold, blue-black, grey, copper or black, depending on chemistry
- Thickness examples
- TiN/TiAlN 2–3 µm; carbon multilayer 1.5 µm; silicon multilayer 1.5–3 µm; AlCr-based 1.5–4 µm; DLC 1–3 or 3–5 µm; TiAlN-based multilayer 1.5–3 µm — confirm selected process
REFERENCE 0307-844
Small positive diamond turning insert geometry choices
Distinct small positive diamond turning forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / t / r (mm) — individual drawing combinations
- 6 / 2.38 / 0.4; 9.2 / 3.97 / 0.4; 7.3 / 2.38 / 0.4; 11.2 / 3.97 / 0.4
REFERENCE 0307-845
Negative diamond and square turning insert geometry choices
Distinct negative diamond and square turning forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / t / r (mm) — individual drawing combinations
- 12.4 / 4.76 / 0.4; 12.3 / 4.76 / 0.4; 12.3 / 4.76 / 0.8
REFERENCE 0307-846
Triangular turning insert geometry choices
Distinct triangular turning forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / t / r (mm) — individual drawing combinations
- 15.5 / 4.76 / 0.4; 14.5 / 4.76 / 0.8; 9.52 / 2.38 / 0.4; 9.52 / 2.38 / 0.8
REFERENCE 0307-847
Acute diamond turning insert geometry choices
Distinct acute diamond turning forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / t / r (mm) — individual drawing combinations
- 15.6 / 4.76 / 0.4; 14.3 / 4.76 / 0.8
REFERENCE 0307-848
Trigon turning insert geometry choices
Distinct trigon turning forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / t / r (mm) — individual drawing combinations
- 8.4 / 4.76 / 0.4; 8.3 / 4.76 / 0.4; 8.3 / 4.76 / 0.8
REFERENCE 0307-849
Narrow parting and grooving insert geometry choices
Distinct narrow parting and grooving forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / t / r (mm) — individual drawing combinations
- 16 / 3.5 / 0.2; 21 / 4.8 / 0.4; 26 / 5.8 / 0.8; 16 / 3.5 / 0.15; 16 / 3.85 / 0.2
REFERENCE 0307-850
Positive diamond finishing insert geometry choices
Distinct positive diamond finishing forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / t / r (mm) — individual drawing combinations
- 6.35 / 2.38 / 0.2; 6.35 / 2.38 / 0.4; 9.52 / 3.97 / 0.2; 9.52 / 3.97 / 0.4; 9.52 / 3.97 / 0.8
REFERENCE 0307-851
Diamond and square turning insert geometry choices
Distinct diamond and square turning forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / t / r (mm) — individual drawing combinations
- 9.52 / 4.76 / 0.8; 12.7 / 4.76 / 0.4; 12.7 / 4.76 / 0.8
REFERENCE 0307-852
Acute diamond finishing insert geometry choices
Distinct acute diamond finishing forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / t / r (mm) — individual drawing combinations
- 9.52 / 4.76 / 0.8
REFERENCE 0307-853
Diamond and positive triangle turning insert geometry choices
Distinct diamond and positive triangle turning forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / t / r (mm) — individual drawing combinations
- 12.7 / 4.76 / 0.4; 5.56 / 4.76 / 0.4; 6.35 / 4.76 / 0.4
REFERENCE 0307-854
Triangular turning with handed profiles insert geometry choices
Distinct triangular turning with handed profiles forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together. Separate left- and right-hand chipbreaker profiles are illustrated; select the hand with the holder.
- l / t / r (mm) — individual drawing combinations
- 9.52 / 4.76 / 0.8; 9.52 / 4.76 / 0.4
REFERENCE 0307-855
Acute diamond and trigon turning insert geometry choices
Distinct acute diamond and trigon turning forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / t / r (mm) — individual drawing combinations
- 9.52 / 4.76 / 0.4; 12.7 / 4.76 / 0.8
REFERENCE 0307-856
Positive rectangular milling insert geometry choices
Distinct positive rectangular milling forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / di / t / d1 / r (mm) — individual drawing combinations
- 11.22 / 6.2 / 3.5 / 2.8 / 0.8; 17.27 / 9.3 / 4.76 / 4.4 / 0.8
REFERENCE 0307-857
Rectangular milling with alternative profiles insert geometry choices
Distinct rectangular milling with alternative profiles forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / di / t / d1 / r (mm) — individual drawing combinations
- 17.25 / 9.23 / 4.76 / 4.4 / 0.8; 17.21 / 9.26 / 4.76 / 4.4 / 0.8
REFERENCE 0307-858
Round milling insert geometry choices
Distinct round milling forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / di / t / d1 (mm) — individual drawing combinations
- 10 / 10 / 3.18 / 4.6; 10 / 10 / 3.97 / 4.4; 12 / 12 / 4.76 / 4.4
REFERENCE 0307-859
Round milling insert geometry choices
Distinct round milling forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / di / t / d1 (mm) — individual drawing combinations
- 12 / 12 / 4.46 / 4.4; 16 / 16 / 5.56 / 5.5
REFERENCE 0307-860
Rounded-square milling insert geometry choices
Distinct rounded-square milling forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / di / t / d1 / r (mm) — individual drawing combinations
- 15 / 12.7 / 5.56 / 4.4 / 1.2; 15 / 15.587 / 5.56 / 5.5 / 1.2; 15 / 15.578 / 5.56 / 5.5 / 1.2
REFERENCE 0307-861
Small positive diamond turning insert geometry choices
Distinct small positive diamond turning forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / di / t / d1 / r (mm) — individual drawing combinations
- 6.4 / 6.35 / 2.38 / 2.8 / 0.8
REFERENCE 0307-862
Positive diamond and rhombic turning insert geometry choices
Distinct positive diamond and rhombic turning forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / di / t / d1 / r (mm) — individual drawing combinations
- 9.7 / 9.525 / 3.97 / 4.4 / 0.4; 9.7 / 9.525 / 3.97 / 4.4 / 0.8; 12.9 / 12.7 / 4.76 / 5.56 / 0.4
REFERENCE 0307-863
Positive rhombic turning insert geometry choices
Distinct positive rhombic turning forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / di / t / d1 / r (mm) — individual drawing combinations
- 12.9 / 12.7 / 4.76 / 5.56 / 0.4; 12.9 / 12.7 / 4.76 / 5.16 / 0.4; 7.8 / 6.35 / 2.38 / 2.8 / 0.4
REFERENCE 0307-864
Acute diamond and triangular turning insert geometry choices
Distinct acute diamond and triangular turning forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / di / t / d1 / r (mm) — individual drawing combinations
- 11.6 / 9.525 / 3.97 / 4.4 / 0.4; 16.5 / 9.525 / 3.97 / 4.4 / 0.8; 16.5 / 9.525 / 4.76 / 3.81 / 0.8
REFERENCE 0307-865
Acute diamond and trigon turning insert geometry choices
Distinct acute diamond and trigon turning forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / di / t / d1 / r (mm) — individual drawing combinations
- 16.5 / 9.525 / 4.76 / 4.4 / 0.8; 8.7 / 12.7 / 4.76 / 5.16 / 0.4
REFERENCE 0307-866
Square milling insert geometry choices
Distinct square milling forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / di / t / d1 / r (mm) — individual drawing combinations
- 4 / 4 / 2.38 / 2.2 / 0.4; 5 / 5 / 2.38 / 2.25 / 0.4; 6 / 6 / 2.38 / 2.61 / 0.4; 7.94 / 7.94 / 3.97 / 2.85 / 0.8; 9.8 / 9.8 / 4.3 / 4.05 / 0.8; 11.5 / 11.5 / 4.8 / 4.45 / 0.8; 14.3 / 14.3 / 5.2 / 5.75 / 1.2
REFERENCE 0307-867
Trigon milling insert geometry choices
Distinct trigon milling forms are paired with an approved holder and substrate/coating selection. Keep each listed dimensional combination together.
- l / di / t / d1 / r (mm) — individual drawing combinations
- 3.8 / 5.56 / 2.38 / 2.8 / 0.8; 4.3 / 6.35 / 2.38 / 3.1 / 0.8; 5.4 / 7.94 / 3.18 / 3.2 / 0.8; 6.5 / 9.525 / 3.97 / 3.7 / 0.8; 8.7 / 12.7 / 4.76 / 4.3 / 1.2
REFERENCE 0307-868
Double-layer coated inserts on a high-cobalt fine-grain substrate
A distinct double-layer coating with a high-cobalt fine-particle matrix is described. Select the actual grade and test conditions for the workpiece rather than transferring a comparison trial into a production guarantee.
- Construction
- Double-layer coating; high-cobalt fine-particle carbide substrate
REFERENCE 0307-869
DIN371/376 thread-point or spiral-flute HSSE taps for wear-resistant/alloy steel
A cobalt-bearing high-speed-steel direction for wear-resistant/alloy steel. Select the actual flute form, coating, hole and drawing; colour rings can help separate the ordered material directions.
- Stated thread scope
- M3–M12
- Identification ring
- Blue
- Substrate
- HSSE
- Surface direction
- Bright or TiCN
- Thread / pitch / overall L1 / straight-point thread length / spiral thread length / shank d1 / square a — dimensions subject to approved drawing/units
- M3 × 0.5 / 0.5 / 56 / 11 / 6 / 3.5 / 2.7; M4 × 0.7 / 0.7 / 63 / 13 / 7 / 4.5 / 3.4; M5 × 0.8 / 0.8 / 70 / 16 / 8 / 6 / 4.9; M6 × 1.0 / 1 / 80 / 19 / 10 / 6 / 4.9; M8 × 1.25 / 1.25 / 90 / 22 / 14 / 8 / 6.2; M10 × 1.5 / 1.5 / 100 / 24 / 16 / 10 / 8; M12 × 1.75 / 1.75 / 110 / 29 / 18 / 9 / 7
REFERENCE 0307-870
DIN371/376 straight-flute HSSE taps for die steel
A cobalt-bearing high-speed-steel direction for die steel. Select the actual flute form, coating, hole and drawing; colour rings can help separate the ordered material directions.
- Stated thread scope
- M3–M12
- Identification ring
- Red
- Substrate
- HSSE
- Surface direction
- Bright or TiCN
- Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units
- M3 × 0.5 / 0.5 / 56 / 11 / 3.5 / 2.7; M4 × 0.7 / 0.7 / 63 / 13 / 4.5 / 3.4; M5 × 0.8 / 0.8 / 70 / 16 / 6 / 4.9; M6 × 1.0 / 1 / 80 / 19 / 6 / 4.9; M8 × 1.25 / 1.25 / 90 / 22 / 8 / 6.2; M10 × 1.5 / 1.5 / 100 / 24 / 10 / 8; M12 × 1.75 / 1.75 / 110 / 29 / 9 / 7
REFERENCE 0307-871
DIN371/376 spiral-flute HSSE taps for aluminium
A cobalt-bearing high-speed-steel direction for aluminium. Select the actual flute form, coating, hole and drawing; colour rings can help separate the ordered material directions.
- Stated thread scope
- M3–M12
- Identification ring
- Yellow
- Substrate
- HSSE
- Surface direction
- Bright or TiCN
- Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units
- M3 × 0.5 / 0.5 / 56 / 6 / 3.5 / 2.7; M4 × 0.7 / 0.7 / 63 / 7 / 4.5 / 3.4; M5 × 0.8 / 0.8 / 70 / 8 / 6 / 4.9; M6 × 1.0 / 1 / 80 / 10 / 6 / 4.9; M8 × 1.25 / 1.25 / 90 / 14 / 8 / 6.2; M10 × 1.5 / 1.5 / 100 / 16 / 10 / 8; M12 × 1.75 / 1.75 / 110 / 18 / 9 / 7
REFERENCE 0307-872
DIN371/376 thread-point or spiral-flute HSSE taps for general workpiece selection
A cobalt-bearing high-speed-steel direction for general workpiece selection. Select the actual flute form, coating, hole and drawing; colour rings can help separate the ordered material directions.
- Stated thread scope
- M3–M12
- Identification ring
- Green
- Substrate
- HSSE
- Surface direction
- Bright or TiN
- Thread / pitch / overall L1 / straight-point thread length / spiral thread length / shank d1 / square a — dimensions subject to approved drawing/units
- M3 × 0.5 / 0.5 / 56 / 11 / 6 / 3.5 / 2.7; M4 × 0.7 / 0.7 / 63 / 13 / 7 / 4.5 / 3.4; M5 × 0.8 / 0.8 / 70 / 16 / 8 / 6 / 4.9; M6 × 1.0 / 1 / 80 / 19 / 10 / 6 / 4.9; M8 × 1.25 / 1.25 / 90 / 22 / 14 / 8 / 6.2; M10 × 1.5 / 1.5 / 100 / 24 / 16 / 10 / 8; M12 × 1.75 / 1.75 / 110 / 29 / 18 / 9 / 7
REFERENCE 0307-873
DIN371/376 straight-flute HSSE taps for brass
A cobalt-bearing high-speed-steel direction for brass. Select the actual flute form, coating, hole and drawing; colour rings can help separate the ordered material directions.
- Stated thread scope
- M3–M12
- Identification ring
- Orange
- Substrate
- HSSE
- Surface direction
- Bright or TiCN
- Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units
- M3 × 0.5 / 0.5 / 56 / 11 / 3.5 / 2.7; M4 × 0.7 / 0.7 / 63 / 13 / 4.5 / 3.4; M5 × 0.8 / 0.8 / 70 / 16 / 6 / 4.9; M6 × 1.0 / 1 / 80 / 19 / 6 / 4.9; M8 × 1.25 / 1.25 / 90 / 22 / 8 / 6.2; M10 × 1.5 / 1.5 / 100 / 24 / 10 / 8; M12 × 1.75 / 1.75 / 110 / 29 / 9 / 7
REFERENCE 0307-874
DIN371/376 straight-flute HSSE taps for cast steel
A cobalt-bearing high-speed-steel direction for cast steel. Select the actual flute form, coating, hole and drawing; colour rings can help separate the ordered material directions.
- Stated thread scope
- M3–M12
- Identification ring
- Black
- Substrate
- HSSE
- Surface direction
- Oxynitride
- Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units
- M3 × 0.5 / 0.5 / 56 / 11 / 3.5 / 2.7; M4 × 0.7 / 0.7 / 63 / 13 / 4.5 / 3.4; M5 × 0.8 / 0.8 / 70 / 16 / 6 / 4.9; M6 × 1.0 / 1 / 80 / 19 / 6 / 4.9; M8 × 1.25 / 1.25 / 90 / 22 / 8 / 6.2; M10 × 1.5 / 1.5 / 100 / 24 / 10 / 8; M12 × 1.75 / 1.75 / 110 / 29 / 9 / 7
REFERENCE 0307-875
DIN371/376 thread-point or spiral-flute HSSE taps for stainless steel
A cobalt-bearing high-speed-steel direction for stainless steel. Select the actual flute form, coating, hole and drawing; colour rings can help separate the ordered material directions.
- Stated thread scope
- M3–M12
- Identification ring
- White
- Substrate
- HSSE
- Surface direction
- Vapour-treatment direction; exact process on order
- Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units
- M3 × 0.5 / 0.5 / 56 / 11 / 3.5 / 2.7; M4 × 0.7 / 0.7 / 63 / 13 / 4.5 / 3.4; M5 × 0.8 / 0.8 / 70 / 16 / 6 / 4.9; M6 × 1.0 / 1 / 80 / 19 / 6 / 4.9; M8 × 1.25 / 1.25 / 90 / 22 / 8 / 6.2; M10 × 1.5 / 1.5 / 100 / 24 / 10 / 8; M12 × 1.75 / 1.75 / 110 / 29 / 9 / 7
REFERENCE 0307-876
JIS thread-point or spiral-flute HSSE taps for wear-resistant/alloy steel
A cobalt-bearing high-speed-steel direction for wear-resistant/alloy steel. Select the actual flute form, coating, hole and drawing; colour rings can help separate the ordered material directions.
- Stated thread scope
- M3–M12
- Identification ring
- Blue
- Substrate
- HSSE
- Surface direction
- Bright or TiCN
- Thread / pitch / overall L1 / straight-point thread length / spiral thread length / shank d1 / square a — dimensions subject to approved drawing/units
- M3 × 0.5 / 0.5 / 46 / 9 / 6 / 4 / not specified; M4 × 0.7 / 0.7 / 52 / 11 / 7 / 5 / not specified; M5 × 0.8 / 0.8 / 60 / 14 / 8 / 5.5 / not specified; M6 × 1.0 / 1 / 62 / 17 / 10 / 6 / not specified; M8 × 1.25 / 1.25 / 70 / 20 / 14 / 6.2 / not specified; M10 × 1.5 / 1.5 / 75 / 22 / 16 / 7 / not specified; M12 × 1.75 / 1.75 / 82 / 27 / 18 / 8.5 / not specified
REFERENCE 0307-877
JIS straight-flute HSSE taps for die steel
A cobalt-bearing high-speed-steel direction for die steel. Select the actual flute form, coating, hole and drawing; colour rings can help separate the ordered material directions.
- Stated thread scope
- M3–M12
- Identification ring
- Red
- Substrate
- HSSE
- Surface direction
- Bright or TiCN
- Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units
- M3 × 0.5 / 0.5 / 46 / 9 / 4 / not specified; M4 × 0.7 / 0.7 / 52 / 11 / 5 / not specified; M5 × 0.8 / 0.8 / 60 / 14 / 5.5 / not specified; M6 × 1.0 / 1 / 62 / 17 / 6 / not specified; M8 × 1.25 / 1.25 / 70 / 20 / 6.2 / not specified; M10 × 1.5 / 1.5 / 75 / 22 / 7 / not specified; M12 × 1.75 / 1.75 / 82 / 27 / 8.5 / not specified
REFERENCE 0307-878
JIS spiral-flute HSSE taps for aluminium
A cobalt-bearing high-speed-steel direction for aluminium. Select the actual flute form, coating, hole and drawing; colour rings can help separate the ordered material directions.
- Stated thread scope
- M3–M12
- Identification ring
- Yellow
- Substrate
- HSSE
- Surface direction
- Bright or TiCN
- Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units
- M3 × 0.5 / 0.5 / 46 / 6 / 4 / not specified; M4 × 0.7 / 0.7 / 52 / 7 / 5 / not specified; M5 × 0.8 / 0.8 / 60 / 8 / 5.5 / not specified; M6 × 1.0 / 1 / 62 / 10 / 6 / not specified; M8 × 1.25 / 1.25 / 70 / 14 / 6.2 / not specified; M10 × 1.5 / 1.5 / 75 / 16 / 7 / not specified; M12 × 1.75 / 1.75 / 82 / 18 / 8.5 / not specified
REFERENCE 0307-879
JIS thread-point or spiral-flute HSSE taps for general workpiece selection
A cobalt-bearing high-speed-steel direction for general workpiece selection. Select the actual flute form, coating, hole and drawing; colour rings can help separate the ordered material directions.
- Stated thread scope
- M3–M12
- Identification ring
- Green
- Substrate
- HSSE
- Surface direction
- Bright or TiN
- Thread / pitch / overall L1 / straight-point thread length / spiral thread length / shank d1 / square a — dimensions subject to approved drawing/units
- M3 × 0.5 / 0.5 / 46 / 9 / 6 / 4 / not specified; M4 × 0.7 / 0.7 / 52 / 11 / 7 / 5 / not specified; M5 × 0.8 / 0.8 / 60 / 14 / 8 / 5.5 / not specified; M6 × 1.0 / 1 / 62 / 17 / 10 / 6 / not specified; M8 × 1.25 / 1.25 / 70 / 20 / 14 / 6.2 / not specified; M10 × 1.5 / 1.5 / 75 / 22 / 16 / 7 / not specified; M12 × 1.75 / 1.75 / 82 / 27 / 18 / 8.5 / not specified
REFERENCE 0307-880
JIS straight-flute HSSE taps for brass
A cobalt-bearing high-speed-steel direction for brass. Select the actual flute form, coating, hole and drawing; colour rings can help separate the ordered material directions.
- Stated thread scope
- M3–M12
- Identification ring
- Orange
- Substrate
- HSSE
- Surface direction
- Bright or TiCN
- Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units
- M3 × 0.5 / 0.5 / 46 / 9 / 4 / not specified; M4 × 0.7 / 0.7 / 52 / 11 / 5 / not specified; M5 × 0.8 / 0.8 / 60 / 14 / 5.5 / not specified; M6 × 1.0 / 1 / 62 / 17 / 6 / not specified; M8 × 1.25 / 1.25 / 70 / 20 / 6.2 / not specified; M10 × 1.5 / 1.5 / 75 / 22 / 7 / not specified; M12 × 1.75 / 1.75 / 82 / 27 / 8.5 / not specified
REFERENCE 0307-881
JIS straight-flute HSSE taps for cast steel
A cobalt-bearing high-speed-steel direction for cast steel. Select the actual flute form, coating, hole and drawing; colour rings can help separate the ordered material directions.
- Stated thread scope
- M3–M12
- Identification ring
- Black
- Substrate
- HSSE
- Surface direction
- Oxynitride
- Thread / pitch / overall L1 / thread length L2 / shank d1 / square a — dimensions subject to approved drawing/units
- M3 × 0.5 / 0.5 / 46 / 9 / 4 / not specified; M4 × 0.7 / 0.7 / 52 / 11 / 5 / not specified; M5 × 0.8 / 0.8 / 60 / 14 / 5.5 / not specified; M6 × 1.0 / 1 / 62 / 17 / 6 / not specified; M8 × 1.25 / 1.25 / 70 / 20 / 6.2 / not specified; M10 × 1.5 / 1.5 / 75 / 22 / 7 / not specified; M12 × 1.75 / 1.75 / 82 / 27 / 8.5 / not specified
REFERENCE 0307-882
JIS thread-point or spiral-flute HSSE taps for stainless steel
A cobalt-bearing high-speed-steel direction for stainless steel. Select the actual flute form, coating, hole and drawing; colour rings can help separate the ordered material directions.
- Stated thread scope
- M3–M12
- Identification ring
- White
- Substrate
- HSSE
- Surface direction
- Vapour-treatment direction; exact process on order
- Thread / pitch / overall L1 / straight-point thread length / spiral thread length / shank d1 / square a — dimensions subject to approved drawing/units
- M3 × 0.5 / 0.5 / 46 / 9 / 6 / 4 / not specified; M4 × 0.7 / 0.7 / 52 / 11 / 7 / 5 / not specified; M5 × 0.8 / 0.8 / 60 / 14 / 8 / 5.5 / not specified; M6 × 1.0 / 1 / 62 / 17 / 10 / 6 / not specified; M8 × 1.25 / 1.25 / 70 / 20 / 14 / 6.2 / not specified; M10 × 1.5 / 1.5 / 75 / 22 / 16 / 7 / not specified; M12 × 1.75 / 1.75 / 82 / 27 / 18 / 8.5 / not specified
REFERENCE 0307-883
Internal-coolant HSSE thread-point taps
AlTiN-coated HSSE taps for a reviewed stainless/die-steel, medium/low-carbon steel or ductile-iron application. Confirm chip evacuation and the hole type before selection.
- Thread scope
- M8–M24
- Substrate / coating
- HSSE / AlTiN
- Chamfer direction
- 2P
- Chamfer / thread / pitch / shank d2 / d3 / overall L1 / L2 / L3 / recommended pilot diameter (mm except thread/limit/count)
- 2P / M8 / 1,25 / 6 / 5,5 / 90 / 13 / 45 / 6,8; 2P / M10 / 1,5 / 7 / 6,5 / 100 / 15 / 50 / 8,5; 2P / M12 / 1,75 / 9 / 8,5 / 110 / 18 / 55 / 10,2; 2P / M14 / 2 / 11 / 10,5 / 110 / 20 / 55 / 12; 2P / M16 / 2 / 12 / 11,5 / 110 / 20 / 55 / 14; 2P / M18 / 2,5 / 14 / 13,5 / 125 / 25 / 65 / 15,5; 2P / M20 / 2,5 / 16 / 15,5 / 140 / 25 / 70 / 17,5; 2P / M22 / 2,5 / 18 / 17,5 / 140 / 25 / 70 / 19,5; 2P / M24 / 3 / 18 / 17,5 / 160 / 30 / 80 / 21
REFERENCE 0307-884
Internal-coolant HSSE spiral-flute taps
AlTiN-coated HSSE taps for a reviewed stainless/die-steel, medium/low-carbon steel or ductile-iron application. Confirm chip evacuation and the hole type before selection.
- Thread scope
- M8–M24
- Substrate / coating
- HSSE / AlTiN
- Chamfer direction
- 4P
- Chamfer / thread / pitch / shank d2 / d3 / overall L1 / L2 / L3 / recommended pilot diameter (mm except thread/limit/count)
- 4P / M8 / 1,25 / 6 / 5,8 / 90 / 17,8 / 35 / 6,8; 4P / M10 / 1,5 / 7 / 6,8 / 100 / 19,8 / 39 / 8,5; 4P / M12 / 1,75 / 9 / 8,8 / 110 / 24,8 / 42 / 10,2; 4P / M14 / 2 / 11 / 10,5 / 110 / 24 / 50 / 12; 4P / M16 / 2 / 12 / 11,5 / 110 / 26 / 52 / 14; 4P / M18 / 2,5 / 14 / 13,5 / 125 / 31 / 57 / 15,5; 4P / M20 / 2,5 / 16 / 15,5 / 140 / 31 / 57 / 17,5; 4P / M22 / 2,5 / 18 / 17,5 / 140 / 32 / 58 / 19,5; 4P / M24 / 3 / 18 / 17,5 / 160 / 39 / 65 / 21
REFERENCE 0307-885
ANSI short-lead helical HSSE taps
Select the thread, tolerance, neck and square drive for the holder. Workpiece and actual engagement depth are confirmed separately for the machining setup.
- Helix
- 40°
- Chamfer
- 2.5P
- Hole type
- Blind hole
- Substrate
- HSSE
- Surface choices
- Bright, TiN or TiCN
- Thread / pitch (metric or TPI as designated) / limit / chamfer / overall L / thread L1 / neck Ln / shank d2 / square a / square length / flutes — dimensions subject to approved drawing/units
- No.4 / 40 / SF1 / 2.5P / 44 / 7.7 / 17 / 3 / 2.5 / 5 / 3; No.4 / 48 / SF1 / 2.5P / 44 / 7.7 / 17 / 3 / 2.5 / 5 / 3; No.6 / 32 / SF2 / 2.5P / 48 / 9.6 / 21 / 4 / 3.2 / 6 / 3; No.6 / 40 / SF1 / 2.5P / 48 / 9.6 / 21 / 4 / 3.2 / 6 / 3; No.8 / 32 / SF2 / 2.5P / 52 / 9.6 / 21 / 5 / 4 / 7 / 3; No.8 / 36 / SF2 / 2.5P / 52 / 9.6 / 21 / 5 / 4 / 7 / 3; No.10 / 24 / SF2 / 2.5P / 60 / 12.7 / 24 / 5.5 / 4.5 / 7 / 3; No.10 / 32 / SF2 / 2.5P / 60 / 12.7 / 24 / 5.5 / 4.5 / 7 / 3; No.12 / 24 / SF2 / 2.5P / 60 / 12.7 / 25 / 5.5 / 4.5 / 7 / 3; No.12 / 28 / SF2 / 2.5P / 60 / 12.7 / 25 / 5.5 / 4.5 / 7 / 3; 1/4 / 20 / SF3 / 2.5P / 62 / 15.3 / 29 / 6 / 4.5 / 7 / 3; 1/4 / 28 / SF2 / 2.5P / 62 / 15.3 / 29 / 6 / 4.5 / 7 / 3; 5/16 / 18 / SF3 / 2.5P / 70 / 17 / 37 / 6.1 / 5 / 8 / 3; 5/16 / 24 / SF2 / 2.5P / 70 / 17 / 37 / 6.1 / 5 / 8 / 3; 3/8 / 16 / SF3 / 2.5P / 75 / 19 / 41 / 7 / 5.5 / 8 / 3; 3/8 / 24 / SF2 / 2.5P / 75 / 19 / 41 / 7 / 5.5 / 8 / 3; 7/16 / 14 / SF3 / 2.5P / 80 / 22 / 48 / 8 / 6 / 9 / 3; 7/16 / 20 / SF3 / 2.5P / 80 / 22 / 48 / 8 / 6 / 9 / 3; 1/2 / 13 / SF3 / 2.5P / 85 / 23 / 48 / 9 / 7 / 10 / 3; 1/2 / 20 / SF3 / 2.5P / 85 / 23 / 48 / 9 / 7 / 10 / 3; 9/16 / 12 / SF2 / 2.5P / 90 / 25 / 48 / 10.5 / 8 / 11 / 3; 9/16 / 18 / SF2 / 2.5P / 90 / 17 / 48 / 10.5 / 8 / 11 / 3; 5/8 / 11 / SF3 / 2.5P / 95 / 28 / 52 / 12 / 9 / 12 / 3; 5/8 / 18 / SF2 / 2.5P / 95 / 17 / 52 / 12 / 9 / 12 / 3; 3/4 / 10 / SF3 / 2.5P / 105 / 31 / 58 / 14 / 11 / 14 / 4; 3/4 / 16 / SF2 / 2.5P / 105 / 19 / 58 / 14 / 11 / 14 / 4; 7/8 / 9 / SF3 / 2.5P / 115 / 34 / 63 / 17 / 13 / 16 / 4; 7/8 / 14 / SF2 / 2.5P / 115 / 22 / 63 / 17 / 13 / 16 / 4; 1 / 8 / SF3 / 2.5P / 125 / 38 / 68 / 20 / 15 / 18 / 4; 1 / 12 / SF3 / 2.5P / 125 / 25 / 68 / 20 / 15 / 18 / 4
REFERENCE 0307-886
ANSI spiral-point HSSE taps
Select the thread, tolerance, neck and square drive for the holder. Workpiece and actual engagement depth are confirmed separately for the machining setup.
- Chamfer
- 5P
- Hole type
- Through hole
- Substrate
- HSSE
- Surface choices
- Bright, TiN or TiCN
- Thread / pitch (metric or TPI as designated) / limit / chamfer / overall L / thread L1 / neck Ln / shank d2 / square a / square length / flutes — dimensions subject to approved drawing/units
- No.4 / 40 / SF2 / 5P / 44 / 15 / 21 / 3 / 2.5 / 5 / 2; No.4 / 48 / SF2 / 5P / 44 / 15 / 21 / 3 / 2.5 / 5 / 2; No.6 / 32 / SF2 / 5P / 48 / 13 / 21 / 4 / 3.2 / 6 / 3; No.6 / 40 / SF2 / 5P / 48 / 13 / 21 / 4 / 3.2 / 6 / 3; No.8 / 32 / SF2 / 5P / 52 / 13 / 21 / 5 / 4 / 7 / 3; No.8 / 36 / SF2 / 5P / 52 / 13 / 21 / 5 / 4 / 7 / 3; No.10 / 24 / SF2 / 5P / 60 / 16 / 24 / 5.5 / 4.5 / 7 / 3; No.10 / 32 / SF2 / 5P / 60 / 16 / 24 / 5.5 / 4.5 / 7 / 3; No.12 / 24 / SF2 / 5P / 60 / 17 / 25 / 5.5 / 4.5 / 7 / 3; No.12 / 28 / SF2 / 5P / 60 / 17 / 25 / 5.5 / 4.5 / 7 / 3; 1/4 / 20 / SF3 / 5P / 62 / 19 / 29 / 6 / 4.5 / 7 / 3; 1/4 / 28 / SF2 / 5P / 62 / 19 / 29 / 6 / 4.5 / 7 / 3; 5/16 / 18 / SF3 / 5P / 70 / 22 / 37 / 6.1 / 5 / 8 / 3; 5/16 / 24 / SF3 / 5P / 70 / 22 / 37 / 6.1 / 5 / 8 / 3; 3/8 / 16 / SF3 / 5P / 75 / 24 / 41 / 7 / 5.5 / 8 / 3; 3/8 / 24 / SF3 / 5P / 75 / 24 / 41 / 7 / 5.5 / 8 / 3; 7/16 / 14 / SF3 / 5P / 80 / 25 / 48 / 8 / 6 / 9 / 3; 7/16 / 20 / SF3 / 5P / 80 / 25 / 48 / 8 / 6 / 9 / 3; 1/2 / 13 / SF3 / 5P / 85 / 29 / 48 / 9 / 7 / 10 / 3; 1/2 / 20 / SF3 / 5P / 85 / 29 / 48 / 9 / 7 / 10 / 3; 9/16 / 12 / SF3 / 5P / 90 / 30 / 48 / 10.5 / 8 / 11 / 3; 9/16 / 18 / SF3 / 5P / 90 / 30 / 48 / 10.5 / 8 / 11 / 3; 5/8 / 11 / SF3 / 5P / 95 / 32 / 52 / 12 / 9 / 12 / 3; 5/8 / 18 / SF3 / 5P / 95 / 32 / 52 / 12 / 9 / 12 / 3; 3/4 / 10 / SF3 / 5P / 105 / 37 / 58 / 14 / 11 / 14 / 3; 3/4 / 16 / SF3 / 5P / 105 / 37 / 58 / 14 / 11 / 14 / 3; 7/8 / 9 / SF4 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; 7/8 / 14 / SF3 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; 1 / 8 / SF4 / 5P / 125 / 45 / 68 / 20 / 15 / 18 / 3; 1 / 12 / SF3 / 5P / 125 / 45 / 68 / 20 / 15 / 18 / 3
REFERENCE 0307-887
JIS helical powder-HSS taps
Select the thread, tolerance, neck and square drive for the holder. Workpiece and actual engagement depth are confirmed separately for the machining setup.
- Helix
- 45°
- Chamfer
- 2.5P table; 2–3P narrative
- Hole type
- Blind hole
- Substrate
- Powder-metal HSS
- Surface choices
- Bright or AlCrN
- Thread / pitch (metric or TPI as designated) / limit / chamfer / overall L / thread L1 / neck Ln / shank d2 / square a / square length / flutes — dimensions subject to approved drawing/units
- M3 / 0.5 / SF2 / 2.5P / 46 / 4 / 19 / 4 / 3.2 / 6 / 3; M3.5 / 0.6 / SF2 / 2.5P / 48 / 4.8 / 20 / 4 / 3.2 / 6 / 3; M4 / 0.7 / SF3 / 2.5P / 52 / 5.6 / 21 / 5 / 4 / 7 / 3; MF4 / 0.5 / SF2 / 2.5P / 52 / 5.6 / 21 / 5 / 4 / 7 / 3; M5 / 0.8 / SF3 / 2.5P / 60 / 6.4 / 24 / 5.5 / 4.5 / 7 / 3; MF5 / 0.5 / SF2 / 2.5P / 60 / 6.4 / 24 / 5.5 / 4.5 / 7 / 3; M6 / 1 / SF3 / 2.5P / 62 / 8 / 29 / 6 / 4.5 / 7 / 3; MF6 / 0.75 / SF2 / 2.5P / 62 / 8 / 29 / 6 / 4.5 / 7 / 3; M7 / 1 / SF3 / 2.5P / 65 / 12 / 33 / 6.2 / 5 / 8 / 3; M8 / 1.25 / SF3 / 2.5P / 70 / 15 / 37 / 6.2 / 5 / 8 / 3; MF8 / 1 / SF3 / 2.5P / 70 / 12 / 37 / 6.2 / 5 / 8 / 3; M10 / 1.5 / SF3 / 2.5P / 75 / 18 / 41 / 7 / 5.5 / 9 / 3; MF10 / 1.25 / SF3 / 2.5P / 75 / 15 / 41 / 7 / 5.5 / 9 / 3; MF10 / 1 / SF3 / 2.5P / 75 / 15 / 41 / 7 / 5.5 / 9 / 3; M12 / 1.75 / SF4 / 2.5P / 82 / 21 / 48 / 8.5 / 6.5 / 9 / 3; MF12 / 1.5 / SF3 / 2.5P / 82 / 18 / 48 / 8.5 / 6.5 / 9 / 3; MF12 / 1.25 / SF3 / 2.5P / 82 / 18 / 48 / 8.5 / 6.5 / 9 / 3; MF12 / 1 / SF3 / 2.5P / 82 / 18 / 48 / 8.5 / 6.5 / 9 / 3; M14 / 2 / SF4 / 2.5P / 88 / 24 / 48 / 10.5 / 8 / 11 / 3; MF14 / 1.5 / SF3 / 2.5P / 88 / 18 / 48 / 10.5 / 8 / 11 / 3; MF14 / 1.25 / SF3 / 2.5P / 88 / 18 / 48 / 10.5 / 8 / 11 / 3; MF14 / 1 / SF3 / 2.5P / 88 / 18 / 48 / 10.5 / 8 / 11 / 3; M16 / 2 / SF4 / 2.5P / 95 / 24 / 52 / 12.5 / 10 / 13 / 3; MF16 / 1.5 / SF3 / 2.5P / 95 / 18 / 52 / 12.5 / 10 / 13 / 3; MF16 / 1 / SF3 / 2.5P / 95 / 18 / 52 / 12.5 / 10 / 13 / 3; M18 / 2.5 / SF5 / 2.5P / 100 / 30 / 55 / 14 / 11 / 14 / 4; MF18 / 2 / SF4 / 2.5P / 100 / 24 / 55 / 14 / 11 / 14 / 4; MF18 / 1.5 / SF4 / 2.5P / 100 / 24 / 55 / 14 / 11 / 14 / 4; MF18 / 1 / SF3 / 2.5P / 100 / 24 / 55 / 14 / 11 / 14 / 4; M20 / 2.5 / SF5 / 2.5P / 105 / 30 / 58 / 15 / 12 / 15 / 4; MF20 / 2 / SF4 / 2.5P / 105 / 24 / 58 / 15 / 12 / 15 / 4; MF20 / 1.5 / SF4 / 2.5P / 105 / 24 / 58 / 15 / 12 / 15 / 4; MF20 / 1 / SF3 / 2.5P / 105 / 24 / 58 / 15 / 12 / 15 / 4; M22 / 2.5 / SF5 / 2.5P / 115 / 30 / 63 / 17 / 13 / 16 / 4; MF22 / 2 / SF4 / 2.5P / 115 / 24 / 63 / 17 / 13 / 16 / 4; MF22 / 1.5 / SF4 / 2.5P / 115 / 24 / 63 / 17 / 13 / 16 / 4; MF22 / 1 / SF3 / 2.5P / 115 / 24 / 63 / 17 / 13 / 16 / 4; M24 / 3 / SF5 / 2.5P / 120 / 36 / 66 / 19 / 15 / 18 / 4; MF24 / 2 / SF4 / 2.5P / 120 / 24 / 66 / 19 / 15 / 18 / 4; MF24 / 1.5 / SF4 / 2.5P / 120 / 24 / 66 / 19 / 15 / 18 / 4; MF24 / 1 / SF3 / 2.5P / 120 / 24 / 66 / 19 / 15 / 18 / 4
REFERENCE 0307-888
JIS spiral-point powder-HSS taps
Select the thread, tolerance, neck and square drive for the holder. Workpiece and actual engagement depth are confirmed separately for the machining setup.
- Chamfer
- 5P table; 4–5P narrative
- Hole type
- Through hole
- Substrate
- Powder-metal HSS
- Surface choices
- Bright or AlCrN
- Thread / pitch (metric or TPI as designated) / limit / chamfer / overall L / thread L1 / neck Ln / shank d2 / square a / square length / flutes — dimensions subject to approved drawing/units
- M3 / 0.5 / SF3 / 5P / 46 / 11 / 19 / 4 / 3.2 / 6 / 3; M3.5 / 0.6 / SF2 / 5P / 48 / 13 / 20 / 4 / 3.2 / 6 / 3; M4 / 0.7 / SF3 / 5P / 52 / 13 / 21 / 5 / 4 / 7 / 3; MF4 / 0.5 / SF3 / 5P / 52 / 13 / 21 / 5 / 4 / 7 / 3; M5 / 0.8 / SF3 / 5P / 60 / 16 / 24 / 5.5 / 4.5 / 7 / 3; MF5 / 0.5 / SF3 / 5P / 60 / 16 / 24 / 5.5 / 4.5 / 7 / 3; M6 / 1 / SF3 / 5P / 62 / 19 / 29 / 6 / 4.5 / 7 / 3; MF6 / 0.75 / SF3 / 5P / 62 / 19 / 29 / 6 / 4.5 / 7 / 3; M7 / 1 / SF3 / 5P / 65 / 19 / 33 / 6.2 / 5 / 8 / 3; M8 / 1.25 / SF3 / 5P / 70 / 22 / 37 / 6.2 / 5 / 8 / 3; MF8 / 1 / SF3 / 5P / 70 / 22 / 37 / 6.2 / 5 / 8 / 3; M10 / 1.5 / SF4 / 5P / 75 / 24 / 41 / 7 / 5.5 / 9 / 3; MF10 / 1.25 / SF3 / 5P / 75 / 24 / 41 / 7 / 5.5 / 9 / 3; MF10 / 1 / SF3 / 5P / 75 / 24 / 41 / 7 / 5.5 / 9 / 3; M12 / 1.75 / SF4 / 5P / 82 / 29 / 48 / 8.5 / 6.5 / 9 / 3; MF12 / 1.5 / SF4 / 5P / 82 / 29 / 48 / 8.5 / 6.5 / 9 / 3; MF12 / 1.25 / SF3 / 5P / 82 / 29 / 48 / 8.5 / 6.5 / 9 / 3; MF12 / 1 / SF3 / 5P / 82 / 29 / 48 / 8.5 / 6.5 / 9 / 3; M14 / 2 / SF4 / 5P / 88 / 30 / 48 / 10.5 / 8 / 11 / 3; MF14 / 1.5 / SF4 / 5P / 88 / 30 / 48 / 10.5 / 8 / 11 / 3; MF14 / 1.25 / SF4 / 5P / 88 / 30 / 48 / 10.5 / 8 / 11 / 3; MF14 / 1 / SF3 / 5P / 88 / 30 / 48 / 10.5 / 8 / 11 / 3; M16 / 2 / SF4 / 5P / 95 / 32 / 52 / 12.5 / 10 / 13 / 3; MF16 / 1.5 / SF4 / 5P / 95 / 32 / 52 / 12.5 / 10 / 13 / 3; MF16 / 1 / SF3 / 5P / 95 / 32 / 52 / 12.5 / 10 / 13 / 3; M18 / 2.5 / SF5 / 5P / 100 / 37 / 55 / 14 / 11 / 14 / 3; MF18 / 2 / SF4 / 5P / 100 / 37 / 55 / 14 / 11 / 14 / 3; MF18 / 1.5 / SF4 / 5P / 100 / 37 / 55 / 14 / 11 / 14 / 3; MF18 / 1 / SF3 / 5P / 100 / 37 / 55 / 14 / 11 / 14 / 3; M20 / 2.5 / SF5 / 5P / 105 / 37 / 58 / 15 / 12 / 15 / 3; MF20 / 2 / SF4 / 5P / 105 / 37 / 58 / 15 / 12 / 15 / 3; MF20 / 1.5 / SF4 / 5P / 105 / 37 / 58 / 15 / 12 / 15 / 3; MF20 / 1 / SF3 / 5P / 105 / 37 / 58 / 15 / 12 / 15 / 3; M22 / 2.5 / SF5 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; MF22 / 2 / SF4 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; MF22 / 1.5 / SF4 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; MF22 / 1 / SF3 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; M24 / 3 / SF5 / 5P / 120 / 45 / 66 / 19 / 15 / 18 / 3; MF24 / 2 / SF4 / 5P / 120 / 45 / 66 / 19 / 15 / 18 / 3; MF24 / 1.5 / SF4 / 5P / 120 / 45 / 66 / 19 / 15 / 18 / 3; MF24 / 1 / SF3 / 5P / 120 / 45 / 66 / 19 / 15 / 18 / 3
REFERENCE 0307-889
ANSI helical powder-HSS taps
Select the thread, tolerance, neck and square drive for the holder. Workpiece and actual engagement depth are confirmed separately for the machining setup.
- Helix
- 45°
- Chamfer
- 2.5P
- Hole type
- Blind hole
- Substrate
- Powder-metal HSS
- Surface choices
- Bright or AlCrN
- Thread / pitch (metric or TPI as designated) / limit / chamfer / overall L / thread L1 / neck Ln / shank d2 / square a / square length / flutes — dimensions subject to approved drawing/units
- No.4 / 40 / SF2 / 2.5P / 44 / 5.1 / 17 / 3 / 2.5 / 5 / 2; No.4 / 48 / SF2 / 2.5P / 44 / 5.1 / 17 / 3 / 2.5 / 5 / 2; No.6 / 32 / SF2 / 2.5P / 48 / 6.4 / 21 / 4 / 3.2 / 6 / 2; No.6 / 40 / SF2 / 2.5P / 48 / 6.4 / 21 / 4 / 3.2 / 6 / 2; No.8 / 32 / SF2 / 2.5P / 52 / 6.4 / 21 / 5 / 4 / 7 / 2; No.8 / 36 / SF2 / 2.5P / 52 / 6.4 / 21 / 5 / 4 / 7 / 2; No.10 / 24 / SF2 / 2.5P / 60 / 8.5 / 24 / 5.5 / 4.5 / 7 / 2; No.10 / 32 / SF2 / 2.5P / 60 / 8.5 / 24 / 5.5 / 4.5 / 7 / 2; No.12 / 24 / SF2 / 2.5P / 60 / 8.5 / 24 / 5.5 / 4.5 / 7 / 2; No.12 / 28 / SF2 / 2.5P / 60 / 8.5 / 24 / 5.5 / 4.5 / 7 / 2; 1/4 / 20 / SF3 / 2.5P / 62 / 10.2 / 29 / 6 / 4.5 / 7 / 2; 1/4 / 28 / SF2 / 2.5P / 62 / 10.2 / 29 / 6 / 4.5 / 7 / 2; 5/16 / 18 / SF3 / 2.5P / 70 / 17 / 37 / 6.1 / 5 / 8 / 3; 5/16 / 24 / SF3 / 2.5P / 70 / 13 / 37 / 6.1 / 5 / 8 / 3; 3/8 / 16 / SF3 / 2.5P / 75 / 19 / 41 / 7 / 5.5 / 8 / 3; 3/8 / 24 / SF3 / 2.5P / 75 / 13 / 41 / 7 / 5.5 / 8 / 3; 7/16 / 14 / SF3 / 2.5P / 80 / 22 / 48 / 8 / 6 / 9 / 3; 7/16 / 20 / SF3 / 2.5P / 80 / 15 / 48 / 8 / 6 / 9 / 3; 1/2 / 13 / SF3 / 2.5P / 85 / 23 / 48 / 9 / 7 / 10 / 3; 1/2 / 20 / SF3 / 2.5P / 85 / 15 / 48 / 9 / 7 / 10 / 3; 9/16 / 12 / SF4 / 2.5P / 90 / 25 / 48 / 10.5 / 8 / 11 / 3; 9/16 / 18 / SF3 / 2.5P / 90 / 17 / 48 / 10.5 / 8 / 11 / 3; 5/8 / 11 / SF4 / 2.5P / 95 / 28 / 52 / 12 / 9 / 12 / 4; 5/8 / 18 / SF3 / 2.5P / 95 / 17 / 52 / 12 / 9 / 12 / 4; 3/4 / 10 / SF4 / 2.5P / 105 / 31 / 58 / 14 / 11 / 14 / 4; 3/4 / 16 / SF3 / 2.5P / 105 / 19 / 58 / 14 / 11 / 14 / 4; 7/8 / 9 / SF5 / 2.5P / 115 / 34 / 63 / 17 / 13 / 16 / 4; 7/8 / 14 / SF4 / 2.5P / 115 / 22 / 63 / 17 / 13 / 16 / 4; 1 / 8 / SF5 / 2.5P / 125 / 38 / 68 / 20 / 15 / 18 / 4; 1 / 12 / SF5 / 2.5P / 125 / 25 / 68 / 20 / 15 / 18 / 4
REFERENCE 0307-890
ANSI spiral-point powder-HSS taps
Select the thread, tolerance, neck and square drive for the holder. Workpiece and actual engagement depth are confirmed separately for the machining setup.
- Chamfer
- 5P
- Hole type
- Through hole
- Substrate
- Powder-metal HSS
- Surface choices
- Bright or AlCrN
- Thread / pitch (metric or TPI as designated) / limit / chamfer / overall L / thread L1 / neck Ln / shank d2 / square a / square length / flutes — dimensions subject to approved drawing/units
- No.4 / 40 / SF2 / 5P / 44 / 15 / not specified / 3 / 2.5 / 5 / 2; No.4 / 48 / SF2 / 5P / 44 / 15 / not specified / 3 / 2.5 / 5 / 2; No.6 / 32 / SF2 / 5P / 48 / 13 / 21 / 4 / 3.2 / 6 / 3; No.6 / 40 / SF2 / 5P / 48 / 13 / 21 / 4 / 3.2 / 6 / 3; No.8 / 32 / SF2 / 5P / 52 / 13 / 21 / 5 / 4 / 7 / 3; No.8 / 36 / SF2 / 5P / 52 / 13 / 21 / 5 / 4 / 7 / 3; No.10 / 24 / SF2 / 5P / 60 / 16 / 24 / 5.5 / 4.5 / 7 / 3; No.10 / 32 / SF2 / 5P / 60 / 16 / 24 / 5.5 / 4.5 / 7 / 3; No.12 / 24 / SF2 / 5P / 60 / 17 / 25 / 5.5 / 4.5 / 7 / 3; No.12 / 28 / SF2 / 5P / 60 / 17 / 25 / 5.5 / 4.5 / 7 / 3; 1/4 / 20 / SF3 / 5P / 62 / 19 / 29 / 6 / 4.5 / 7 / 3; 1/4 / 28 / SF2 / 5P / 62 / 19 / 29 / 6 / 4.5 / 7 / 3; 5/16 / 18 / SF3 / 5P / 70 / 22 / 37 / 6.1 / 5 / 8 / 3; 5/16 / 24 / SF3 / 5P / 70 / 22 / 37 / 6.1 / 5 / 8 / 3; 3/8 / 16 / SF3 / 5P / 75 / 24 / 41 / 7 / 5.5 / 8 / 3; 3/8 / 24 / SF3 / 5P / 75 / 24 / 41 / 7 / 5.5 / 8 / 3; 7/16 / 14 / SF3 / 5P / 80 / 25 / 48 / 8 / 6 / 9 / 3; 7/16 / 20 / SF3 / 5P / 80 / 25 / 48 / 8 / 6 / 9 / 3; 1/2 / 13 / SF4 / 5P / 85 / 29 / 48 / 9 / 7 / 10 / 3; 1/2 / 20 / SF3 / 5P / 85 / 29 / 48 / 9 / 7 / 10 / 3; 9/16 / 12 / SF4 / 5P / 90 / 30 / 48 / 10.5 / 8 / 11 / 3; 9/16 / 18 / SF3 / 5P / 90 / 30 / 48 / 10.5 / 8 / 11 / 3; 5/8 / 11 / SF4 / 5P / 95 / 32 / 52 / 12 / 9 / 12 / 3; 5/8 / 18 / SF3 / 5P / 95 / 32 / 52 / 12 / 9 / 12 / 3; 3/4 / 10 / SF4 / 5P / 105 / 37 / 58 / 14 / 11 / 14 / 3; 3/4 / 16 / SF4 / 5P / 105 / 37 / 58 / 14 / 11 / 14 / 3; 7/8 / 9 / SF5 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; 7/8 / 14 / SF4 / 5P / 115 / 38 / 63 / 17 / 13 / 16 / 3; 1 / 8 / SF5 / 5P / 125 / 45 / 68 / 20 / 15 / 18 / 3; 1 / 12 / SF4 / 5P / 125 / 45 / 68 / 20 / 15 / 18 / 3
REFERENCE 0307-891
Helical powder-HSS taps, Bright direction
Powder-metal HSS provides a separate substrate direction for the selected thread. Match the neck, shank and tool-holder interface; the tolerance and lead chamfer remain specific to each thread.
- Substrate
- Powder-metal HSS
- Surface choice
- Bright
- Chamfer
- 2.5P
- Layout references
- DIN371, DIN374, DIN376 by thread size
- Thread / lead / tap limit / overall L / thread L1 / neck Ln / shank D / square a / flutes — dimensions subject to approved drawing/units
- M2 × 0.4 / 2.5P / 6H / 45 / 8 / 14 / 2.8 / 2.1 / 2; M2.5 × 0.45 / 2.5P / 6H / 50 / 5 / 15 / 2.8 / 2.1 / 3; M3 × 0.5 / 2.5P / 6H / 56 / 5 / 18 / 3.5 / 2.7 / 3; M3.5 × 0.6 / 2.5P / 6H / 56 / 6 / 20 / 4 / 3 / 3; M4 × 0.7 / 2.5P / 6H / 63 / 7 / 21 / 4.5 / 3.4 / 3; MF4 × 0.5 / 2.5P / 6G / 63 / 7 / 21 / 4.5 / 3.4 / 3; M5 × 0.8 / 2.5P / 6H / 70 / 8 / 25 / 6 / 4.9 / 3; MF5×0.5 / 2.5P / 6H / 70 / 8 / 25 / 6 / 4.9 / 3; MF5×0.5 / 2.5P / 6G / 70 / 8 / 25 / 6 / 4.9 / 3; M6×1.0 / 2.5P / 6H / 80 / 10 / 30 / 6 / 4.9 / 3; M6×1.0 / 2.5P / 6G / 80 / 10 / 30 / 6 / 4.9 / 3; MF6×0.75 / 2.5P / 6H / 80 / 10 / 30 / 6 / 4.9 / 3; MF6×0.75 / 2.5P / 6G / 80 / 10 / 30 / 6 / 4.9 / 3; M8×1.25 / 2.5P / 6H / 90 / 13 / 35 / 8 / 6.2 / 3; M8×1.25 / 2.5P / 6G / 90 / 13 / 35 / 8 / 6.2 / 3; MF8×1.0 / 2.5P / 6H / 90 / 13 / 35 / 8 / 6.2 / 3; MF8×1.0 / 2.5P / 6G / 90 / 13 / 35 / 8 / 6.2 / 3; M10×1.5 / 2.5P / 6H / 100 / 15 / 39 / 10 / 8 / 3; M10×1.5 / 2.5P / 6G / 100 / 15 / 39 / 10 / 8 / 3; MF10×1.25 / 2.5P / 6H / 100 / 13 / 39 / 10 / 8 / 3; MF10×1.25 / 2.5P / 6G / 100 / 13 / 39 / 10 / 8 / 3; MF10×1.0 / 2.5P / 6H / 100 / 13 / 39 / 10 / 8 / 3; MF10×1.0 / 2.5P / 6G / 100 / 13 / 39 / 10 / 8 / 3; M12×1.75 / 2.5P / 6H / 110 / 18 / 53 / 9 / 7 / 3; M12×1.75 / 2.5P / 6G / 110 / 18 / 53 / 9 / 7 / 3; MF12×1.5 / 2.5P / 6H / 100 / 15 / 48 / 9 / 7 / 3; MF12×1.5 / 2.5P / 6G / 100 / 15 / 48 / 9 / 7 / 3; MF12×1.25 / 2.5P / 6H / 100 / 15 / 48 / 9 / 7 / 3; MF12×1.25 / 2.5P / 6G / 100 / 15 / 48 / 9 / 7 / 3; MF12×1.0 / 2.5P / 6H / 100 / 15 / 48 / 9 / 7 / 3; MF12×1.0 / 2.5P / 6G / 100 / 15 / 48 / 9 / 7 / 3; M14×2.0 / 2.5P / 6H / 110 / 20 / 53 / 11 / 9 / 3; M14×2.0 / 2.5P / 6G / 110 / 20 / 53 / 11 / 9 / 3; MF14×1.5 / 2.5P / 6H / 100 / 15 / 48 / 11 / 9 / 3; MF14×1.5 / 2.5P / 6G / 100 / 15 / 48 / 11 / 9 / 3; MF14×1.0 / 2.5P / 6H / 100 / 15 / 48 / 11 / 9 / 3; MF14×1.0 / 2.5P / 6G / 100 / 15 / 48 / 11 / 9 / 3; M16×2.0 / 2.5P / 6H / 110 / 20 / 53 / 12 / 9 / 3; M16×2.0 / 2.5P / 6G / 110 / 20 / 53 / 12 / 9 / 3; MF16×1.5 / 2.5P / 6H / 100 / 15 / 48 / 12 / 9 / 3; MF16×1.5 / 2.5P / 6G / 100 / 15 / 48 / 12 / 9 / 3; MF16×1.0 / 2.5P / 6H / 100 / 15 / 48 / 12 / 9 / 3; MF16×1.0 / 2.5P / 6G / 100 / 15 / 48 / 12 / 9 / 3
REFERENCE 0307-892
Helical powder-HSS taps, AlCrN direction
Powder-metal HSS provides a separate substrate direction for the selected thread. Match the neck, shank and tool-holder interface; the tolerance and lead chamfer remain specific to each thread.
- Substrate
- Powder-metal HSS
- Surface choice
- AlCrN
- Chamfer
- 2.5P
- Layout references
- DIN371, DIN374, DIN376 by thread size
- Thread / lead / tap limit / overall L / thread L1 / neck Ln / shank D / square a / flutes — dimensions subject to approved drawing/units
- M2 x 0.4 / 2.5P / 6H / 45 / 8 / 14 / 2.8 / 2.1 / 2; M2 x 0.4 / 2.5P / 6G / 45 / 8 / 14 / 2.8 / 2.1 / 2; M2.5 x 0.45 / 2.5P / 6H / 50 / 5 / 15 / 2.8 / 2.1 / 3; M2.5 x 0.45 / 2.5P / 6G / 50 / 5 / 15 / 2.8 / 2.1 / 3; M3 x 0.5 / 2.5P / 6H / 56 / 5 / 18 / 3.5 / 2.7 / 3; M3 x 0.5 / 2.5P / 6G / 56 / 5 / 18 / 3.5 / 2.7 / 3; M3.5 x 0.6 / 2.5P / 6H / 56 / 6 / 20 / 4 / 3 / 3; M3.5 x 0.6 / 2.5P / 6G / 56 / 6 / 20 / 4 / 3 / 3; M4 x 0.7 / 2.5P / 6H / 63 / 7 / 21 / 4.5 / 3.4 / 3; M4 x 0.7 / 2.5P / 6G / 63 / 7 / 21 / 4.5 / 3.4 / 3; MF4 x 0.5 / 2.5P / 6H / 63 / 7 / 21 / 4.5 / 3.4 / 3; MF4 x 0.5 / 2.5P / 6G / 63 / 7 / 21 / 4.5 / 3.4 / 3; M5 x 0.8 / 2.5P / 6H / 70 / 8 / 25 / 6 / 4.9 / 3; M5 x 0.8 / 2.5P / 6G / 70 / 8 / 25 / 6 / 4.9 / 3; MF5 x 0.5 / 2.5P / 6H / 70 / 8 / 25 / 6 / 4.9 / 3; MF5 x 0.5 / 2.5P / 6G / 70 / 8 / 25 / 6 / 4.9 / 3; M6 x 1.0 / 2.5P / 6H / 80 / 10 / 30 / 6 / 4.9 / 3; M6 x 1.0 / 2.5P / 6G / 80 / 10 / 30 / 6 / 4.9 / 3; MF6 x 0.75 / 2.5P / 6H / 80 / 10 / 30 / 6 / 4.9 / 3; MF6 x 0.75 / 2.5P / 6G / 80 / 10 / 30 / 6 / 4.9 / 3; M8 x 1.25 / 2.5P / 6H / 90 / 13 / 35 / 8 / 6.2 / 3; M8 x 1.25 / 2.5P / 6G / 90 / 13 / 35 / 8 / 6.2 / 3; MF8 x 1.0 / 2.5P / 6H / 90 / 13 / 35 / 8 / 6.2 / 3; MF8 x 1.0 / 2.5P / 6G / 90 / 13 / 35 / 8 / 6.2 / 3; M10 x 1.5 / 2.5P / 6H / 100 / 15 / 39 / 10 / 8 / 3; M10 x 1.5 / 2.5P / 6G / 100 / 15 / 39 / 10 / 8 / 3; MF10 x 1.25 / 2.5P / 6H / 100 / 13 / 39 / 10 / 8 / 3; MF10 x 1.25 / 2.5P / 6G / 100 / 13 / 39 / 10 / 8 / 3; MF10 x 1.0 / 2.5P / 6H / 100 / 13 / 39 / 10 / 8 / 3; MF10 x 1.0 / 2.5P / 6G / 100 / 13 / 39 / 10 / 8 / 3; M12 x 1.75 / 2.5P / 6H / 110 / 18 / 53 / 9 / 7 / 3; M12 x 1.75 / 2.5P / 6G / 110 / 18 / 53 / 9 / 7 / 3; MF12 x 1.5 / 2.5P / 6H / 100 / 15 / 48 / 9 / 7 / 3; MF12 x 1.5 / 2.5P / 6G / 100 / 15 / 48 / 9 / 7 / 3; MF12 x 1.25 / 2.5P / 6H / 100 / 15 / 48 / 9 / 7 / 3; MF12 x 1.25 / 2.5P / 6G / 100 / 15 / 48 / 9 / 7 / 3; MF12 x 1.0 / 2.5P / 6H / 100 / 15 / 48 / 9 / 7 / 3; MF12 x 1.0 / 2.5P / 6G / 100 / 15 / 48 / 9 / 7 / 3; M14 x 2.0 / 2.5P / 6H / 110 / 20 / 53 / 11 / 9 / 3; M14 x 2.0 / 2.5P / 6G / 110 / 20 / 53 / 11 / 9 / 3; MF14 x 1.5 / 2.5P / 6H / 100 / 15 / 48 / 11 / 9 / 3; MF14 x 1.5 / 2.5P / 6G / 100 / 15 / 48 / 11 / 9 / 3; MF14 x 1.0 / 2.5P / 6H / 100 / 15 / 48 / 11 / 9 / 3; MF14 x 1.0 / 2.5P / 6G / 100 / 15 / 48 / 11 / 9 / 3; M16 x 2.0 / 2.5P / 6H / 110 / 20 / 53 / 12 / 9 / 3; M16 x 2.0 / 2.5P / 6G / 110 / 20 / 53 / 12 / 9 / 3; MF16 x 1.5 / 2.5P / 6H / 100 / 15 / 48 / 12 / 9 / 3; MF16 x 1.5 / 2.5P / 6G / 100 / 15 / 48 / 12 / 9 / 3; MF16 x 1.0 / 2.5P / 6H / 100 / 15 / 48 / 12 / 9 / 3; MF16 x 1.0 / 2.5P / 6G / 100 / 15 / 48 / 12 / 9 / 3
REFERENCE 0307-893
Spiral-point powder-HSS taps, Bright direction
Powder-metal HSS provides a separate substrate direction for the selected thread. Match the neck, shank and tool-holder interface; the tolerance and lead chamfer remain specific to each thread.
- Substrate
- Powder-metal HSS
- Surface choice
- Bright
- Chamfer
- 5P
- Layout references
- DIN371, DIN374, DIN376 by thread size
- Thread / lead / tap limit / overall L / thread L1 / neck Ln / shank D / square a / flutes — dimensions subject to approved drawing/units
- M2 x 0.4 / 5P / 6H / 45 / 8 / 14 / 2.8 / 2.1 / 2; M2 x 0.4 / 5P / 6G / 45 / 8 / 14 / 2.8 / 2.1 / 2; M2.5 x 0.45 / 5P / 6H / 50 / 9 / 15 / 2.8 / 2.1 / 3; M2.5 x 0.45 / 5P / 6G / 50 / 9 / 15 / 2.8 / 2.1 / 3; M3 x 0.5 / 5P / 6H / 56 / 9 / 15 / 2.8 / 2.1 / 3; M3 x 0.5 / 5P / 6G / 56 / 9 / 15 / 2.8 / 2.1 / 3; M3.5 x 0.6 / 5P / 6H / 56 / 12 / 20 / 4 / 3 / 3; M3.5 x 0.6 / 5P / 6G / 56 / 12 / 20 / 4 / 3 / 3; M4 x 0.7 / 5P / 6H / 63 / 13 / 21 / 4.5 / 3.4 / 3; M4 x 0.7 / 5P / 6G / 63 / 13 / 21 / 4.5 / 3.4 / 3; MF4 x 0.5 / 5P / 6H / 63 / 13 / 21 / 4.5 / 3.4 / 3; MF4 x 0.5 / 5P / 6G / 63 / 13 / 21 / 4.5 / 3.4 / 3; M5 x 0.8 / 5P / 6H / 70 / 14 / 25 / 6 / 4.9 / 3; M5 x 0.8 / 5P / 6G / 70 / 14 / 25 / 6 / 4.9 / 3; MF5 x 0.5 / 5P / 6H / 70 / 14 / 25 / 6 / 4.9 / 3; MF5 x 0.5 / 5P / 6G / 70 / 14 / 25 / 6 / 4.9 / 3; M6 x 1.0 / 5P / 6H / 80 / 15 / 30 / 6 / 4.9 / 3; M6 x 1.0 / 5P / 6G / 80 / 15 / 30 / 6 / 4.9 / 3; MF6 x 0.75 / 5P / 6H / 80 / 15 / 30 / 6 / 4.9 / 3; MF6 x 0.75 / 5P / 6G / 80 / 15 / 30 / 6 / 4.9 / 3; M8 x 1.25 / 5P / 6H / 90 / 18 / 35 / 8 / 6.2 / 3; M8 x 1.25 / 5P / 6G / 90 / 18 / 35 / 8 / 6.2 / 3; MF8 x 1.0 / 5P / 6H / 90 / 18 / 35 / 8 / 6.2 / 3; MF8 x 1.0 / 5P / 6G / 90 / 18 / 35 / 8 / 6.2 / 3; M10 x 1.5 / 5P / 6H / 100 / 20 / 39 / 10 / 8 / 3; M10 x 1.5 / 5P / 6G / 100 / 20 / 39 / 10 / 8 / 3; MF10 x 1.25 / 5P / 6H / 100 / 16 / 39 / 10 / 8 / 3; MF10 x 1.25 / 5P / 6G / 100 / 16 / 39 / 10 / 8 / 3; MF10 x 1.0 / 5P / 6H / 100 / 16 / 39 / 10 / 8 / 3; MF10 x 1.0 / 5P / 6G / 100 / 16 / 39 / 10 / 8 / 3; M12 x 1.75 / 5P / 6H / 110 / 24 / 53 / 9 / 7 / 3; M12 x 1.75 / 5P / 6G / 110 / 24 / 53 / 9 / 7 / 3; MF12 x 1.5 / 5P / 6H / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.5 / 5P / 6G / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.25 / 5P / 6H / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.25 / 5P / 6G / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.0 / 5P / 6H / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.0 / 5P / 6G / 100 / 22 / 48 / 9 / 7 / 3; M14 x 2.0 / 5P / 6H / 110 / 26 / 53 / 11 / 9 / 3; M14 x 2.0 / 5P / 6G / 110 / 26 / 53 / 11 / 9 / 3; MF14 x 1.5 / 5P / 6H / 100 / 22 / 48 / 11 / 9 / 3; MF14 x 1.5 / 5P / 6G / 100 / 22 / 48 / 11 / 9 / 3; MF14 x 1.0 / 5P / 6H / 100 / 22 / 48 / 11 / 9 / 3; MF14 x 1.0 / 5P / 6G / 100 / 22 / 48 / 11 / 9 / 3; M16 x 2.0 / 5P / 6H / 110 / 27 / 53 / 12 / 9 / 3; M16 x 2.0 / 5P / 6G / 110 / 27 / 53 / 12 / 9 / 3; MF16 x 1.5 / 5P / 6H / 100 / 22 / 48 / 12 / 9 / 3; MF16 x 1.5 / 5P / 6G / 100 / 22 / 48 / 12 / 9 / 3; MF16 x 1.0 / 5P / 6H / 100 / 22 / 48 / 12 / 9 / 3; MF16 x 1.0 / 5P / 6G / 100 / 22 / 48 / 12 / 9 / 3
REFERENCE 0307-894
Spiral-point powder-HSS taps, AlCrN direction
Powder-metal HSS provides a separate substrate direction for the selected thread. Match the neck, shank and tool-holder interface; the tolerance and lead chamfer remain specific to each thread.
- Substrate
- Powder-metal HSS
- Surface choice
- AlCrN
- Chamfer
- 5P
- Layout references
- DIN371, DIN374, DIN376 by thread size
- Thread / lead / tap limit / overall L / thread L1 / neck Ln / shank D / square a / flutes — dimensions subject to approved drawing/units
- M2 x 0.4 / 5P / 6H / 45 / 8 / 14 / 2.8 / 2.1 / 2; M2 x 0.4 / 5P / 6G / 45 / 8 / 14 / 2.8 / 2.1 / 2; M2.5 x 0.45 / 5P / 6H / 50 / 9 / 15 / 2.8 / 2.1 / 3; M2.5 x 0.45 / 5P / 6G / 50 / 9 / 15 / 2.8 / 2.1 / 3; M3 x 0.5 / 5P / 6H / 56 / 9 / 15 / 2.8 / 2.1 / 3; M3 x 0.5 / 5P / 6G / 56 / 9 / 15 / 2.8 / 2.1 / 3; M3.5 x 0.6 / 5P / 6H / 56 / 12 / 20 / 4 / 3 / 3; M3.5 x 0.6 / 5P / 6G / 56 / 12 / 20 / 4 / 3 / 3; M4 x 0.7 / 5P / 6H / 63 / 13 / 21 / 4.5 / 3.4 / 3; M4 x 0.7 / 5P / 6G / 63 / 13 / 21 / 4.5 / 3.4 / 3; MF4 x 0.5 / 5P / 6H / 63 / 13 / 21 / 4.5 / 3.4 / 3; MF4 x 0.5 / 5P / 6G / 63 / 13 / 21 / 4.5 / 3.4 / 3; M5 x 0.8 / 5P / 6H / 70 / 14 / 25 / 6 / 4.9 / 3; M5 x 0.8 / 5P / 6G / 70 / 14 / 25 / 6 / 4.9 / 3; MF5 x 0.5 / 5P / 6H / 70 / 14 / 25 / 6 / 4.9 / 3; MF5 x 0.5 / 5P / 6G / 70 / 14 / 25 / 6 / 4.9 / 3; M6 x 1.0 / 5P / 6H / 80 / 15 / 30 / 6 / 4.9 / 3; M6 x 1.0 / 5P / 6G / 80 / 15 / 30 / 6 / 4.9 / 3; MF6 x 0.75 / 5P / 6H / 80 / 15 / 30 / 6 / 4.9 / 3; MF6 x 0.75 / 5P / 6G / 80 / 15 / 30 / 6 / 4.9 / 3; M8 x 1.25 / 5P / 6H / 90 / 18 / 35 / 8 / 6.2 / 3; M8 x 1.25 / 5P / 6G / 90 / 18 / 35 / 8 / 6.2 / 3; MF8 x 1.0 / 5P / 6H / 90 / 18 / 35 / 8 / 6.2 / 3; MF8 x 1.0 / 5P / 6G / 90 / 18 / 35 / 8 / 6.2 / 3; M10 x 1.5 / 5P / 6H / 100 / 20 / 39 / 10 / 8 / 3; M10 x 1.5 / 5P / 6G / 100 / 20 / 39 / 10 / 8 / 3; MF10 x 1.25 / 5P / 6H / 100 / 16 / 39 / 10 / 8 / 3; MF10 x 1.25 / 5P / 6G / 100 / 16 / 39 / 10 / 8 / 3; MF10 x 1.0 / 5P / 6H / 100 / 16 / 39 / 10 / 8 / 3; MF10 x 1.0 / 5P / 6G / 100 / 16 / 39 / 10 / 8 / 3; M12 x 1.75 / 5P / 6H / 110 / 24 / 53 / 9 / 7 / 3; M12 x 1.75 / 5P / 6G / 110 / 24 / 53 / 9 / 7 / 3; MF12 x 1.5 / 5P / 6H / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.5 / 5P / 6G / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.25 / 5P / 6H / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.25 / 5P / 6G / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.0 / 5P / 6H / 100 / 22 / 48 / 9 / 7 / 3; MF12 x 1.0 / 5P / 6G / 100 / 22 / 48 / 9 / 7 / 3; M14 x 2.0 / 5P / 6H / 110 / 26 / 53 / 11 / 9 / 3; M14 x 2.0 / 5P / 6G / 110 / 26 / 53 / 11 / 9 / 3; MF14 x 1.5 / 5P / 6H / 100 / 22 / 48 / 11 / 9 / 3; MF14 x 1.5 / 5P / 6G / 100 / 22 / 48 / 11 / 9 / 3; MF14 x 1.0 / 5P / 6H / 100 / 22 / 48 / 11 / 9 / 3; MF14 x 1.0 / 5P / 6G / 100 / 22 / 48 / 11 / 9 / 3; M16 x 2.0 / 5P / 6H / 110 / 27 / 53 / 12 / 9 / 3; M16 x 2.0 / 5P / 6G / 110 / 27 / 53 / 12 / 9 / 3; MF16 x 1.5 / 5P / 6H / 100 / 22 / 48 / 12 / 9 / 3; MF16 x 1.5 / 5P / 6G / 100 / 22 / 48 / 12 / 9 / 3; MF16 x 1.0 / 5P / 6H / 100 / 22 / 48 / 12 / 9 / 3; MF16 x 1.0 / 5P / 6G / 100 / 22 / 48 / 12 / 9 / 3
REFERENCE 0307-895
JIS solid-carbide forming taps
Solid-carbide forming tools for approved aluminium, magnesium, copper, cast-aluminium or cast-zinc alloy threading. Confirm material ductility, pilot size and lubrication; keep the ordered lead and coolant route paired with the dimensions.
- Geometry reference
- JIS layout; tolerance to selected thread drawing
- Coolant direction
- No internal coolant specified
- Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / flute-lobe count (mm except thread/limit/count)
- M1×0.25 / RH4 / 4P / 38 / 4.5 / not specified / 3 / 2.5 / 3 / not specified; M1×0.25 / RH4 / 2P / 37 / 3.5 / not specified / 3 / 2.5 / 3 / not specified; M1.2×0.25 / RH4 / 4P / 38 / 4.5 / not specified / 3 / 2.5 / 3 / not specified; M1.2×0.25 / RH4 / 2P / 37 / 3.5 / not specified / 3 / 2.5 / 3 / not specified; M1.4×0.3 / RH4 / 4P / 38 / 6.5 / not specified / 3 / 2.5 / 3 / not specified; M1.4×0.3 / RH4 / 2P / 37 / 6.5 / not specified / 3 / 2.5 / 3 / not specified; M1.6×0.35 / RH5 / 4P / 38 / 8 / not specified / 3 / 2.5 / 3 / not specified; M1.6×0.35 / RH5 / 2P / 36.5 / 8 / not specified / 3 / 2.5 / 3 / not specified; M2×0.4 / RH5 / 4P / 49 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2×0.4 / RH5 / 2P / 47.5 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 4P / 49 / 13 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 2P / 47.5 / 13 / not specified / 3 / 2.5 / 3 / not specified; M3×0.5 / RH6 / 4P / 50 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 2P / 48 / 16 / not specified / 4 / 3.2 / 6 / not specified; M4×0.7 / RH7 / 4P / 54 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 2P / 52 / 18 / not specified / 5 / 4 / 7 / not specified; M5×0.8 / RH7 / 4P / 62 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M5×0.8 / RH7 / 2P / 59.5 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M6×1 / RH7 / 4P / 62 / 19 / 10 / 6 / 4.5 / 7 / 2; M6×1 / RH7 / 2P / 62 / 19 / 10 / 6 / 4.5 / 7 / 2; M8×1.25 / RH7 / 4P / 75 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1.25 / RH7 / 2P / 75 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1 / RH7 / 4P / 75 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1 / RH7 / 2P / 75 / 13 / not specified / 6.2 / 5 / 8 / 3; M10×1.5 / RH8 / 4P / 75 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.5 / RH8 / 2P / 75 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.25 / RH7 / 4P / 75 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.25 / RH7 / 2P / 75 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1 / RH7 / 4P / 75 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1 / RH7 / 2P / 75 / 15 / not specified / 7 / 5.5 / 8 / 6; M12×1.75 / RH9 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.75 / RH9 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.5 / RH8 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.5 / RH8 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.25 / RH7 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.25 / RH7 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1 / RH7 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1 / RH7 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M14×2 / RH10 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×2 / RH10 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.5 / RH8 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.5 / RH8 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.25 / RH7 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.25 / RH7 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1 / RH7 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1 / RH7 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / 6; M16×2 / RH10 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×2 / RH10 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.5 / RH8 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.5 / RH8 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.25 / RH7 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.25 / RH7 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1 / RH7 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1 / RH7 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / 6
REFERENCE 0307-896
JIS carbide forming taps with internal coolant
Solid-carbide forming tools for approved aluminium, magnesium, copper, cast-aluminium or cast-zinc alloy threading. Confirm material ductility, pilot size and lubrication; keep the ordered lead and coolant route paired with the dimensions.
- Geometry reference
- JIS layout; tolerance to selected thread drawing
- Coolant direction
- Side and centre outlets paired with individual rows
- Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / coolant route / flute-lobe count (mm except thread/limit/count)
- M6×1 / RH7 / 4P / 62 / 19 / 10 / 6 / 4.5 / 7 / Side C / 2; M6×1 / RH7 / 2P / 62 / 19 / 10 / 6 / 4.5 / 7 / Center Z / 2; M8×1.25 / RH7 / 4P / 75 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1.25 / RH7 / 2P / 75 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M8×1 / RH7 / 4P / 75 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1 / RH7 / 2P / 75 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M10×1.5 / RH8 / 4P / 75 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.5 / RH8 / 2P / 75 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1.25 / RH7 / 4P / 75 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.25 / RH7 / 2P / 75 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1 / RH7 / 4P / 75 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1 / RH7 / 2P / 75 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M12×1.75 / RH9 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.75 / RH9 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.5 / RH8 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.5 / RH8 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.25 / RH7 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.25 / RH7 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1 / RH7 / 4P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1 / RH7 / 2P / 82 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M14×2 / RH10 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×2 / RH10 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1.5 / RH8 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1.5 / RH8 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1.25 / RH7 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1.25 / RH7 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1 / RH7 / 4P / 100 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1 / RH7 / 2P / 100 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M16×2 / RH10 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×2 / RH10 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1.5 / RH8 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1.5 / RH8 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1.25 / RH7 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1.25 / RH7 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1 / RH7 / 4P / 100 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1 / RH7 / 2P / 100 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6
REFERENCE 0307-897
Long-shank JIS carbide forming taps
Solid-carbide forming tools for approved aluminium, magnesium, copper, cast-aluminium or cast-zinc alloy threading. Confirm material ductility, pilot size and lubrication; keep the ordered lead and coolant route paired with the dimensions.
- Geometry reference
- JIS layout; tolerance to selected thread drawing
- Coolant direction
- No internal coolant specified
- Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / flute-lobe count (mm except thread/limit/count)
- M2×0.4 / RH5 / 4P / 80 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2×0.4 / RH5 / 2P / 78 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2×0.4 / RH5 / 4P / 100 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2×0.4 / RH5 / 2P / 98 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2×0.4 / RH5 / 4P / 120 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2×0.4 / RH5 / 2P / 118 / 10 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 4P / 80 / 13 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 2P / 78 / 13 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 4P / 100 / 13 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 2P / 98 / 13 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 4P / 120 / 13 / not specified / 3 / 2.5 / 3 / not specified; M2.5×0.45 / RH5 / 2P / 118 / 13 / not specified / 3 / 2.5 / 3 / not specified; M3×0.5 / RH6 / 4P / 80 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 2P / 78 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 4P / 100 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 2P / 98 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 4P / 120 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 2P / 118 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 4P / 150 / 16 / not specified / 4 / 3.2 / 6 / not specified; M3×0.5 / RH6 / 2P / 148 / 16 / not specified / 4 / 3.2 / 6 / not specified; M4×0.7 / RH7 / 4P / 80 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 2P / 78 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 4P / 100 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 2P / 98 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 4P / 120 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 2P / 118 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 4P / 150 / 18 / not specified / 5 / 4 / 7 / not specified; M4×0.7 / RH7 / 2P / 148 / 18 / not specified / 5 / 4 / 7 / not specified; M5×0.8 / RH7 / 4P / 80 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M5×0.8 / RH7 / 2P / 78 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M5×0.8 / RH7 / 4P / 100 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M5×0.8 / RH7 / 2P / 98 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M5×0.8 / RH7 / 4P / 120 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M5×0.8 / RH7 / 2P / 118 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M5×0.8 / RH7 / 4P / 150 / 20 / not specified / 5.5 / 4.5 / 7 / not specified; M6×1 / RH7 / 2P / 80 / 19 / 10 / 6 / 4.5 / 7 / 2; M6×1 / RH7 / 2P / 100 / 19 / 10 / 6 / 4.5 / 7 / 2; M6×1 / RH7 / 2P / 120 / 19 / 10 / 6 / 4.5 / 7 / 2; M6×1 / RH7 / 2P / 150 / 19 / 10 / 6 / 4.5 / 7 / 2; M8×1.25 / RH7 / 2P / 100 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1.25 / RH7 / 2P / 120 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1.25 / RH7 / 2P / 150 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1 / RH7 / 2P / 100 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1 / RH7 / 2P / 120 / 13 / not specified / 6.2 / 5 / 8 / 3; M8×1 / RH7 / 2P / 150 / 13 / not specified / 6.2 / 5 / 8 / 3; M10×1.5 / RH8 / 2P / 100 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.5 / RH8 / 2P / 120 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.5 / RH8 / 2P / 150 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.25 / RH7 / 2P / 100 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.25 / RH7 / 2P / 120 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1.25 / RH7 / 2P / 150 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1 / RH7 / 2P / 100 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1 / RH7 / 2P / 120 / 15 / not specified / 7 / 5.5 / 8 / 6; M10×1 / RH7 / 2P / 150 / 15 / not specified / 7 / 5.5 / 8 / 6; M12×1.75 / RH9 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.75 / RH9 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.75 / RH9 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.5 / RH8 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.5 / RH8 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.5 / RH8 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.25 / RH7 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.25 / RH7 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1.25 / RH7 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1 / RH7 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1 / RH7 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M12×1 / RH7 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / 6; M14×2 / RH10 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×2 / RH10 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.5 / RH8 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.5 / RH8 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.25 / RH7 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1.25 / RH7 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1 / RH7 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / 6; M14×1 / RH7 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / 6; M16×2 / RH10 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×2 / RH10 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.5 / RH8 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.5 / RH8 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.25 / RH7 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1.25 / RH7 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1 / RH7 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / 6; M16×1 / RH7 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / 6
REFERENCE 0307-898
Long-shank JIS forming taps with internal coolant
Solid-carbide forming tools for approved aluminium, magnesium, copper, cast-aluminium or cast-zinc alloy threading. Confirm material ductility, pilot size and lubrication; keep the ordered lead and coolant route paired with the dimensions.
- Geometry reference
- JIS layout; tolerance to selected thread drawing
- Coolant direction
- Side and centre outlets paired with individual rows
- Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / coolant route / flute-lobe count (mm except thread/limit/count)
- M6×1 / RH7 / 4P / 80 / 19 / 10 / 6 / 4.5 / 7 / Side C / 2; M6×1 / RH7 / 2P / 80 / 19 / 10 / 6 / 4.5 / 7 / Center Z / 2; M6×1 / RH7 / 4P / 100 / 19 / 10 / 6 / 4.5 / 7 / Side C / 2; M6×1 / RH7 / 2P / 100 / 19 / 10 / 6 / 4.5 / 7 / Center Z / 2; M6×1 / RH7 / 4P / 120 / 19 / 10 / 6 / 4.5 / 7 / Side C / 2; M6×1 / RH7 / 2P / 120 / 19 / 10 / 6 / 4.5 / 7 / Center Z / 2; M6×1 / RH7 / 4P / 150 / 19 / 10 / 6 / 4.5 / 7 / Side C / 2; M6×1 / RH7 / 2P / 150 / 19 / 10 / 6 / 4.5 / 7 / Center Z / 2; M8×1.25 / RH7 / 4P / 100 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1.25 / RH7 / 2P / 100 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M8×1.25 / RH7 / 4P / 120 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1.25 / RH7 / 2P / 120 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M8×1.25 / RH7 / 4P / 150 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1.25 / RH7 / 2P / 150 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M8×1 / RH7 / 4P / 100 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1 / RH7 / 2P / 100 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M8×1 / RH7 / 4P / 120 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1 / RH7 / 2P / 120 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M8×1 / RH7 / 4P / 150 / 13 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1 / RH7 / 2P / 150 / 13 / not specified / 6.2 / 5 / 8 / Center Z / 3; M10×1.5 / RH8 / 4P / 100 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.5 / RH8 / 2P / 100 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1.5 / RH8 / 4P / 120 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.5 / RH8 / 2P / 120 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1.5 / RH8 / 4P / 150 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.5 / RH8 / 2P / 150 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1.25 / RH7 / 4P / 100 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.25 / RH7 / 2P / 100 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1.25 / RH7 / 4P / 120 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.25 / RH7 / 2P / 120 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1.25 / RH7 / 4P / 150 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1.25 / RH7 / 2P / 150 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1 / RH7 / 4P / 100 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1 / RH7 / 2P / 100 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1 / RH7 / 4P / 120 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1 / RH7 / 2P / 120 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M10×1 / RH7 / 4P / 150 / 15 / not specified / 7 / 5.5 / 8 / Side C / 6; M10×1 / RH7 / 2P / 150 / 15 / not specified / 7 / 5.5 / 8 / Center Z / 6; M12×1.75 / RH9 / 4P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.75 / RH9 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.75 / RH9 / 4P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.75 / RH9 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.75 / RH9 / 4P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.75 / RH9 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.5 / RH8 / 4P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.5 / RH8 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.5 / RH8 / 4P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.5 / RH8 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.5 / RH8 / 4P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.5 / RH8 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.25 / RH7 / 4P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.25 / RH7 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.25 / RH7 / 4P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.25 / RH7 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1.25 / RH7 / 4P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1.25 / RH7 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1 / RH7 / 4P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1 / RH7 / 2P / 100 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1 / RH7 / 4P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1 / RH7 / 2P / 120 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M12×1 / RH7 / 4P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Side C / 6; M12×1 / RH7 / 2P / 150 / 17 / not specified / 8.5 / 6.5 / 9 / Center Z / 6; M14×2 / RH10 / 4P / 120 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×2 / RH10 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×2 / RH10 / 4P / 150 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×2 / RH10 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1.5 / RH8 / 4P / 120 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1.5 / RH8 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1.5 / RH8 / 4P / 150 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1.5 / RH8 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1.25 / RH7 / 4P / 120 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1.25 / RH7 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1.25 / RH7 / 4P / 150 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1.25 / RH7 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1 / RH7 / 4P / 120 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1 / RH7 / 2P / 120 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M14×1 / RH7 / 4P / 150 / 20 / not specified / 10.5 / 8 / 11 / Side C / 6; M14×1 / RH7 / 2P / 150 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 6; M16×2 / RH10 / 4P / 120 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×2 / RH10 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×2 / RH10 / 4P / 150 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×2 / RH10 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1.5 / RH8 / 4P / 120 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1.5 / RH8 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1.5 / RH8 / 4P / 150 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1.5 / RH8 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1.25 / RH7 / 4P / 120 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1.25 / RH7 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1.25 / RH7 / 4P / 150 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1.25 / RH7 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1 / RH7 / 4P / 120 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1 / RH7 / 2P / 120 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6; M16×1 / RH7 / 4P / 150 / 20 / not specified / 12.5 / 10 / 13 / Side C / 6; M16×1 / RH7 / 2P / 150 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 6
REFERENCE 0307-899
DIN-layout solid-carbide forming taps
Solid-carbide forming tools for approved aluminium, magnesium, copper, cast-aluminium or cast-zinc alloy threading. Confirm material ductility, pilot size and lubrication; keep the ordered lead and coolant route paired with the dimensions.
- Geometry reference
- DIN layout; tolerance to selected thread drawing
- Coolant direction
- No internal coolant specified
- Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk (mm except thread/limit/count)
- M4×0.7 / RH7 / 4P / 63 / 9 / 12 / 4.5 / 3.4 / 6; M4×0.7 / RH7 / 2.5P / 63 / 9 / 12 / 4.5 / 3.4 / 6; M5×0.8 / RH7 / 4P / 70 / 10 / 15 / 6 / 4.9 / 8; M5×0.8 / RH7 / 2.5P / 70 / 10 / 15 / 6 / 4.9 / 8; M6×1 / RH7 / 4P / 80 / 10 / 20 / 6 / 4.9 / 8; M6×1 / RH7 / 2.5P / 80 / 10 / 20 / 6 / 4.9 / 8; M7×1 / RH7 / 4P / 80 / 10 / 20 / 7 / 5.5 / 8; M7×1 / RH7 / 2.5P / 80 / 10 / 20 / 7 / 5.5 / 8; M8×1.25 / RH7 / 4P / 90 / 13 / 22 / 8 / 6.2 / 9; M8×1.25 / RH7 / 2.5P / 90 / 13 / 22 / 8 / 6.2 / 9; M8×1 / RH7 / 4P / 90 / 13 / 22 / 8 / 6.2 / 9; M8×1 / RH7 / 2.5P / 90 / 13 / 22 / 8 / 6.2 / 9; M10×1.5 / RH8 / 4P / 100 / 15 / 24 / 10 / 8 / 11; M10×1.5 / RH8 / 2.5P / 100 / 15 / 24 / 10 / 8 / 11; M10×1.25 / RH7 / 4P / 100 / 15 / 24 / 10 / 8 / 11; M10×1.25 / RH7 / 2.5P / 100 / 15 / 24 / 10 / 8 / 11; M10×1 / RH7 / 4P / 100 / 15 / 24 / 10 / 8 / 11; M10×1 / RH7 / 2.5P / 100 / 15 / 24 / 10 / 8 / 11; M12×1.75 / RH9 / 4P / 110 / 17 / 32 / 9 / 7 / 10; M12×1.75 / RH9 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10; M12×1.5 / RH8 / 4P / 110 / 17 / 32 / 9 / 7 / 10; M12×1.5 / RH8 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10; M12×1.25 / RH7 / 4P / 110 / 17 / 32 / 9 / 7 / 10; M12×1.25 / RH7 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10; M12×1 / RH7 / 4P / 110 / 17 / 32 / 9 / 7 / 10; M12×1 / RH7 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10; M14×2 / RH10 / 4P / 110 / 20 / 33 / 11 / 9 / 12; M14×2 / RH10 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12; M14×1.5 / RH8 / 4P / 110 / 20 / 33 / 11 / 9 / 12; M14×1.5 / RH8 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12; M14×1.25 / RH7 / 4P / 110 / 20 / 33 / 11 / 9 / 12; M14×1.25 / RH7 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12; M14×1 / RH7 / 4P / 110 / 20 / 33 / 11 / 9 / 12; M14×1 / RH7 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12; M16×2 / RH10 / 4P / 110 / 20 / 34 / 12 / 9 / 12; M16×2 / RH10 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12; M16×1.5 / RH8 / 4P / 110 / 20 / 34 / 12 / 9 / 12; M16×1.5 / RH8 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12; M16×1.25 / RH7 / 4P / 110 / 20 / 34 / 12 / 9 / 12; M16×1.25 / RH7 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12; M16×1 / RH7 / 4P / 110 / 20 / 34 / 12 / 9 / 12; M16×1 / RH7 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12; M18×2.5 / RH10 / 4P / 125 / 25 / 36 / 14 / 11 / 14; M18×2.5 / RH10 / 2.5P / 125 / 25 / 36 / 14 / 11 / 14; M18×2 / RH10 / 4P / 125 / 25 / 36 / 14 / 11 / 14; M18×2 / RH10 / 2.5P / 125 / 25 / 36 / 14 / 11 / 14; M18×1.5 / RH8 / 4P / 125 / 25 / 36 / 14 / 11 / 14; M18×1.5 / RH8 / 2.5P / 125 / 25 / 36 / 14 / 11 / 14; M20×2.5 / RH10 / 4P / 140 / 25 / 44 / 16 / 12 / 15; M20×2.5 / RH10 / 2.5P / 140 / 25 / 44 / 16 / 12 / 15; M20×2 / RH10 / 4P / 140 / 25 / 44 / 16 / 12 / 15; M20×2 / RH10 / 2.5P / 140 / 25 / 44 / 16 / 12 / 15; M20×1.5 / RH8 / 4P / 140 / 25 / 44 / 16 / 12 / 15; M20×1.5 / RH8 / 2.5P / 140 / 25 / 44 / 16 / 12 / 15; M22×2.5 / RH10 / 4P / 140 / 25 / 44 / 18 / 14.5 / 17; M22×2.5 / RH10 / 2.5P / 140 / 25 / 44 / 18 / 14.5 / 17; M22×2 / RH10 / 4P / 140 / 25 / 44 / 18 / 14.5 / 17; M22×2 / RH10 / 2.5P / 140 / 25 / 44 / 18 / 14.5 / 17; M22×1.5 / RH8 / 4P / 140 / 25 / 44 / 18 / 14.5 / 17; M22×1.5 / RH8 / 2.5P / 140 / 25 / 44 / 18 / 14.5 / 17; M24×3 / RH12 / 4P / 160 / 30 / 48 / 18 / 14.5 / 17; M24×3 / RH12 / 2.5P / 160 / 30 / 48 / 18 / 14.5 / 17; M24×2.5 / RH10 / 4P / 160 / 30 / 48 / 18 / 14.5 / 17; M24×2.5 / RH10 / 2.5P / 160 / 30 / 48 / 18 / 14.5 / 17; M24×2 / RH10 / 4P / 160 / 30 / 48 / 18 / 14.5 / 17; M24×2 / RH10 / 2.5P / 160 / 30 / 48 / 18 / 14.5 / 17; M27×3 / RH10 / 4P / 160 / 30 / 48 / 20 / 16 / 19; M27×3 / RH10 / 2.5P / 160 / 30 / 48 / 20 / 16 / 19; M27×2.5 / RH10 / 4P / 160 / 30 / 48 / 20 / 16 / 19; M27×2.5 / RH10 / 2.5P / 160 / 30 / 48 / 20 / 16 / 19; M27×2 / RH10 / 4P / 160 / 30 / 48 / 20 / 16 / 19; M27×2 / RH10 / 2.5P / 160 / 30 / 48 / 20 / 16 / 19; M30×3.5 / RH13 / 4P / 180 / 35 / 53 / 22 / 18 / 21; M30×3.5 / RH13 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21; M30×3 / RH12 / 4P / 180 / 35 / 53 / 22 / 18 / 21; M30×3 / RH12 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21; M30×2.5 / RH10 / 4P / 180 / 35 / 53 / 22 / 18 / 21; M30×2.5 / RH10 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21; M30×2 / RH10 / 4P / 180 / 35 / 53 / 22 / 18 / 21; M30×2 / RH10 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21
REFERENCE 0307-900
DIN-layout carbide forming taps with internal coolant
Solid-carbide forming tools for approved aluminium, magnesium, copper, cast-aluminium or cast-zinc alloy threading. Confirm material ductility, pilot size and lubrication; keep the ordered lead and coolant route paired with the dimensions.
- Geometry reference
- DIN layout; tolerance to selected thread drawing
- Coolant direction
- Side and centre outlets paired with individual rows
- Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / coolant route (mm except thread/limit/count)
- M4×0.7 / RH7 / 4P / 63 / 9 / 12 / 4.5 / 3.4 / 6 / Side C; M4×0.7 / RH7 / 2.5P / 63 / 9 / 12 / 4.5 / 3.4 / 6 / Center Z; M5×0.8 / RH7 / 4P / 70 / 10 / 15 / 6 / 4.9 / 8 / Side C; M5×0.8 / RH7 / 2.5P / 70 / 10 / 15 / 6 / 4.9 / 8 / Center Z; M6×1 / RH7 / 4P / 80 / 10 / 20 / 6 / 4.9 / 8 / Side C; M6×1 / RH7 / 2.5P / 80 / 10 / 20 / 6 / 4.9 / 8 / Center Z; M7×1 / RH7 / 4P / 80 / 10 / 20 / 7 / 5.5 / 8 / Side C; M7×1 / RH7 / 2.5P / 80 / 10 / 20 / 7 / 5.5 / 8 / Center Z; M8×1.25 / RH7 / 4P / 90 / 13 / 22 / 8 / 6.2 / 9 / Side C; M8×1.25 / RH7 / 2.5P / 90 / 13 / 22 / 8 / 6.2 / 9 / Center Z; M8×1 / RH7 / 4P / 90 / 13 / 22 / 8 / 6.2 / 9 / Side C; M8×1 / RH7 / 2.5P / 90 / 13 / 22 / 8 / 6.2 / 9 / Center Z; M10×1.5 / RH8 / 4P / 100 / 15 / 24 / 10 / 8 / 11 / Side C; M10×1.5 / RH8 / 2.5P / 100 / 15 / 24 / 10 / 8 / 11 / Center Z; M10×1.25 / RH7 / 4P / 100 / 15 / 24 / 10 / 8 / 11 / Side C; M10×1.25 / RH7 / 2.5P / 100 / 15 / 24 / 10 / 8 / 11 / Center Z; M10×1 / RH7 / 4P / 100 / 15 / 24 / 10 / 8 / 11 / Side C; M10×1 / RH7 / 2.5P / 100 / 15 / 24 / 10 / 8 / 11 / Center Z; M12×1.75 / RH9 / 4P / 110 / 17 / 32 / 9 / 7 / 10 / Side C; M12×1.75 / RH9 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10 / Center Z; M12×1.5 / RH8 / 4P / 110 / 17 / 32 / 9 / 7 / 10 / Side C; M12×1.5 / RH8 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10 / Center Z; M12×1.25 / RH7 / 4P / 110 / 17 / 32 / 9 / 7 / 10 / Side C; M12×1.25 / RH7 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10 / Center Z; M12×1 / RH7 / 4P / 110 / 17 / 32 / 9 / 7 / 10 / Side C; M12×1 / RH7 / 2.5P / 110 / 17 / 32 / 9 / 7 / 10 / Center Z; M14×2 / RH10 / 4P / 110 / 20 / 33 / 11 / 9 / 12 / Side C; M14×2 / RH10 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12 / Center Z; M14×1.5 / RH8 / 4P / 110 / 20 / 33 / 11 / 9 / 12 / Side C; M14×1.5 / RH8 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12 / Center Z; M14×1.25 / RH7 / 4P / 110 / 20 / 33 / 11 / 9 / 12 / Side C; M14×1.25 / RH7 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12 / Center Z; M14×1 / RH7 / 4P / 110 / 20 / 33 / 11 / 9 / 12 / Side C; M14×1 / RH7 / 2.5P / 110 / 20 / 33 / 11 / 9 / 12 / Center Z; M16×2 / RH10 / 4P / 110 / 20 / 34 / 12 / 9 / 12 / Side C; M16×2 / RH10 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12 / Center Z; M16×1.5 / RH8 / 4P / 110 / 20 / 34 / 12 / 9 / 12 / Side C; M16×1.5 / RH8 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12 / Center Z; M16×1.25 / RH7 / 4P / 110 / 20 / 34 / 12 / 9 / 12 / Side C; M16×1.25 / RH7 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12 / Center Z; M16×1 / RH7 / 4P / 110 / 20 / 34 / 12 / 9 / 12 / Side C; M16×1 / RH7 / 2.5P / 110 / 20 / 34 / 12 / 9 / 12 / Center Z; M18×2.5 / RH10 / 4P / 125 / 25 / 36 / 14 / 11 / 14 / Side C; M18×2.5 / RH10 / 2.5P / 125 / 25 / 36 / 14 / 11 / 14 / Center Z; M18×2 / RH10 / 4P / 125 / 25 / 36 / 14 / 11 / 14 / Side C; M18×2 / RH10 / 2.5P / 125 / 25 / 36 / 14 / 11 / 14 / Center Z; M18×1.5 / RH8 / 4P / 125 / 25 / 36 / 14 / 11 / 14 / Side C; M18×1.5 / RH8 / 2.5P / 125 / 25 / 36 / 14 / 11 / 14 / Center Z; M20×2.5 / RH10 / 4P / 140 / 25 / 44 / 16 / 12 / 15 / Side C; M20×2.5 / RH10 / 2.5P / 140 / 25 / 44 / 16 / 12 / 15 / Center Z; M20×2 / RH10 / 4P / 140 / 25 / 44 / 16 / 12 / 15 / Side C; M20×2 / RH10 / 2.5P / 140 / 25 / 44 / 16 / 12 / 15 / Center Z; M20×1.5 / RH8 / 4P / 140 / 25 / 44 / 16 / 12 / 15 / Side C; M20×1.5 / RH8 / 2.5P / 140 / 25 / 44 / 16 / 12 / 15 / Center Z; M22×2.5 / RH10 / 4P / 140 / 25 / 44 / 18 / 14.5 / 17 / Side C; M22×2.5 / RH10 / 2.5P / 140 / 25 / 44 / 18 / 14.5 / 17 / Center Z; M22×2 / RH10 / 4P / 140 / 25 / 44 / 18 / 14.5 / 17 / Side C; M22×2 / RH10 / 2.5P / 140 / 25 / 44 / 18 / 14.5 / 17 / Center Z; M22×1.5 / RH8 / 4P / 140 / 25 / 44 / 18 / 14.5 / 17 / Side C; M22×1.5 / RH8 / 2.5P / 140 / 25 / 44 / 18 / 14.5 / 17 / Center Z; M24×3 / RH12 / 4P / 160 / 30 / 48 / 18 / 14.5 / 17 / Side C; M24×3 / RH12 / 2.5P / 160 / 30 / 48 / 18 / 14.5 / 17 / Center Z; M24×2.5 / RH10 / 4P / 160 / 30 / 48 / 18 / 14.5 / 17 / Side C; M24×2.5 / RH10 / 2.5P / 160 / 30 / 48 / 18 / 14.5 / 17 / Center Z; M24×2 / RH10 / 4P / 160 / 30 / 48 / 18 / 14.5 / 17 / Side C; M24×2 / RH10 / 2.5P / 160 / 30 / 48 / 18 / 14.5 / 17 / Center Z; M27×3 / RH10 / 4P / 160 / 30 / 48 / 20 / 16 / 19 / Side C; M27×3 / RH10 / 2.5P / 160 / 30 / 48 / 20 / 16 / 19 / Center Z; M27×2.5 / RH10 / 4P / 160 / 30 / 48 / 20 / 16 / 19 / Side C; M27×2.5 / RH10 / 2.5P / 160 / 30 / 48 / 20 / 16 / 19 / Center Z; M27×2 / RH10 / 4P / 160 / 30 / 48 / 20 / 16 / 19 / Side C; M27×2 / RH10 / 2.5P / 160 / 30 / 48 / 20 / 16 / 19 / Center Z; M30×3.5 / RH13 / 4P / 180 / 35 / 53 / 22 / 18 / 21 / Side C; M30×3.5 / RH13 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21 / Center Z; M30×3 / RH12 / 4P / 180 / 35 / 53 / 22 / 18 / 21 / Side C; M30×3 / RH12 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21 / Center Z; M30×2.5 / RH10 / 4P / 180 / 35 / 53 / 22 / 18 / 21 / Side C; M30×2.5 / RH10 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21 / Center Z; M30×2 / RH10 / 4P / 180 / 35 / 53 / 22 / 18 / 21 / Side C; M30×2 / RH10 / 2.5P / 180 / 35 / 53 / 22 / 18 / 21 / Center Z
REFERENCE 0307-901
DIN-layout solid-carbide cutting taps
Solid-carbide cutting taps for the agreed work material, hole and chip-control conditions. Confirm the actual flute shape and coolant routing on the approved drawing.
- Geometry reference
- DIN layout; tolerance to selected thread drawing
- Coolant direction
- No internal coolant specified
- Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / flute-lobe count (mm except thread/limit/count)
- M4×0.7 / P2 / 2.5P / 63 / 13 / 8 / 4.5 / 3.4 / 6 / 3; M5×0.8 / P2 / 2.5P / 70 / 15 / 10 / 6 / 4.9 / 8 / 3; M6×1 / P2 / 2.5P / 80 / 17 / 13 / 6 / 4.9 / 8 / 3; M7×1 / P3 / 2.5P / 80 / 17 / 13 / 7 / 5.5 / 8 / 3; M8×1 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / 3; M8×1.25 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / 3; M10×1.5 / P4 / 2.5P / 90 / 18 / 21 / 10 / 8 / 11 / 3; M10×1.25 / P3 / 2.5P / 90 / 18 / 21 / 10 / 8 / 11 / 3; M12×1.75 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / 3; M12×1.5 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / 3; M12×1.25 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / 3; M14×2 / P5 / 2.5P / 110 / 26 / not specified / 11 / 9 / 12 / 3; M14×1.5 / P4 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / 3; M14×1.25 / P3 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / 3; M16×2 / P5 / 2.5P / 110 / 27 / not specified / 12 / 9 / 12 / 3; M16×1.5 / P4 / 2.5P / 110 / 22 / not specified / 12 / 9 / 12 / 3; M16×1.25 / P3 / 2.5P / 110 / 18 / not specified / 12 / 9 / 12 / 3; M18×2.5 / P6 / 2.5P / 125 / 30 / not specified / 14 / 11 / 14 / 4; M18×2 / P5 / 2.5P / 125 / 26 / not specified / 14 / 11 / 14 / 4; M18×1.5 / P4 / 2.5P / 125 / 25 / not specified / 14 / 11 / 14 / 4; M20×2.5 / P6 / 2.5P / 140 / 32 / not specified / 16 / 12 / 15 / 4; M20×2 / P5 / 2.5P / 140 / 27 / not specified / 16 / 12 / 15 / 4; M20×1.5 / P4 / 2.5P / 140 / 25 / not specified / 16 / 12 / 15 / 4; M22×2.5 / P6 / 2.5P / 140 / 32 / not specified / 18 / 14.5 / 17 / 4; M22×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / 4; M22×1.5 / P4 / 2.5P / 140 / 25 / not specified / 18 / 14.5 / 17 / 4; M24×3 / P6 / 2.5P / 140 / 34 / not specified / 18 / 14.5 / 17 / 4; M24×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / 4; M24×1.5 / P4 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / 4; M27×3 / P6 / 2.5P / 160 / 36 / not specified / 20 / 16 / 19 / 4; M30×3.5 / P7 / 2.5P / 180 / 40 / not specified / 22 / 18 / 21 / 4
REFERENCE 0307-902
DIN-layout spiral cutting taps with internal coolant
Solid-carbide cutting taps for the agreed work material, hole and chip-control conditions. Confirm the actual flute shape and coolant routing on the approved drawing.
- Geometry reference
- DIN layout; tolerance to selected thread drawing
- Coolant direction
- Side and centre outlets paired with individual rows
- Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / coolant route / flute-lobe count (mm except thread/limit/count)
- M4×0.7 / P2 / 2.5P / 63 / 13 / 8 / 4.5 / 3.4 / 6 / Side C / 3; M4×0.7 / P2 / 2.5P / 63 / 13 / 8 / 4.5 / 3.4 / 6 / Center Z / 3; M5×0.8 / P2 / 2.5P / 70 / 15 / 8 / 6 / 4.9 / 8 / Side C / 3; M5×0.8 / P2 / 2.5P / 70 / 15 / 10 / 6 / 4.9 / 8 / Center Z / 3; M6×1 / P2 / 2.5P / 80 / 17 / 10 / 6 / 4.9 / 8 / Side C / 3; M6×1 / P2 / 2.5P / 80 / 17 / 13 / 6 / 4.9 / 8 / Center Z / 3; M7×1 / P3 / 2.5P / 80 / 17 / 13 / 7 / 5.5 / 8 / Side C / 3; M7×1 / P3 / 2.5P / 80 / 17 / 13 / 7 / 5.5 / 8 / Center Z / 3; M8×1 / P3 / 2.5P / 90 / 16 / 13 / 8 / 6.2 / 9 / Side C / 3; M8×1 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / Center Z / 3; M8×1.25 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / Side C / 3; M8×1.25 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / Center Z / 3; M10×1.5 / P4 / 2.5P / 100 / 18 / 21 / 10 / 8 / 11 / Side C / 3; M10×1.5 / P4 / 2.5P / 100 / 18 / 21 / 10 / 8 / 11 / Center Z / 3; M10×1.25 / P3 / 2.5P / 100 / 18 / 21 / 10 / 8 / 11 / Side C / 3; M10×1.25 / P3 / 2.5P / 100 / 18 / 21 / 10 / 8 / 11 / Center Z / 3; M12×1.75 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Side C / 3; M12×1.75 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Center Z / 3; M12×1.5 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Side C / 3; M12×1.5 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Center Z / 3; M12×1.25 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Side C / 3; M12×1.25 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Center Z / 3; M14×2 / P5 / 2.5P / 110 / 26 / not specified / 11 / 9 / 12 / Side C / 3; M14×2 / P5 / 2.5P / 110 / 26 / not specified / 11 / 9 / 12 / Center Z / 3; M14×1.5 / P4 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Side C / 3; M14×1.5 / P4 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Center Z / 3; M14×1.25 / P3 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Side C / 3; M14×1.25 / P3 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Center Z / 3; M16×2 / P5 / 2.5P / 110 / 27 / not specified / 12 / 9 / 12 / Side C / 3; M16×2 / P5 / 2.5P / 110 / 27 / not specified / 12 / 9 / 12 / Center Z / 3; M16×1.5 / P4 / 2.5P / 110 / 22 / not specified / 12 / 9 / 12 / Side C / 3; M16×1.5 / P4 / 2.5P / 110 / 22 / not specified / 12 / 9 / 12 / Center Z / 3; M16×1.25 / P3 / 2.5P / 110 / 18 / not specified / 12 / 9 / 12 / Side C / 3; M16×1.25 / P3 / 2.5P / 110 / 18 / not specified / 12 / 9 / 12 / Center Z / 3; M18×2.5 / P6 / 2.5P / 125 / 30 / not specified / 14 / 11 / 14 / Side C / 4; M18×2.5 / P6 / 2.5P / 125 / 30 / not specified / 14 / 11 / 14 / Center Z / 4; M18×2 / P5 / 2.5P / 125 / 26 / not specified / 14 / 11 / 14 / Side C / 4; M18×2 / P5 / 2.5P / 125 / 26 / not specified / 14 / 11 / 14 / Center Z / 4; M18×1.5 / P4 / 2.5P / 125 / 25 / not specified / 14 / 11 / 14 / Side C / 4; M18×1.5 / P4 / 2.5P / 125 / 25 / not specified / 14 / 11 / 14 / Center Z / 4; M20×2.5 / P6 / 2.5P / 140 / 32 / not specified / 16 / 12 / 15 / Side C / 4; M20×2.5 / P6 / 2.5P / 140 / 32 / not specified / 16 / 12 / 15 / Center Z / 4; M20×2 / P5 / 2.5P / 140 / 27 / not specified / 16 / 12 / 15 / Side C / 4; M20×2 / P5 / 2.5P / 140 / 27 / not specified / 16 / 12 / 15 / Center Z / 4; M20×1.5 / P4 / 2.5P / 140 / 25 / not specified / 16 / 12 / 15 / Side C / 4; M20×1.5 / P4 / 2.5P / 140 / 25 / not specified / 16 / 12 / 15 / Center Z / 4; M22×2.5 / P6 / 2.5P / 140 / 32 / not specified / 18 / 14.5 / 17 / Side C / 4; M22×2.5 / P6 / 2.5P / 140 / 32 / not specified / 18 / 14.5 / 17 / Center Z / 4; M22×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Side C / 4; M22×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Center Z / 4; M22×1.5 / P4 / 2.5P / 140 / 25 / not specified / 18 / 14.5 / 17 / Side C / 4; M22×1.5 / P4 / 2.5P / 140 / 25 / not specified / 18 / 14.5 / 17 / Center Z / 4; M24×3 / P6 / 2.5P / 140 / 34 / not specified / 18 / 14.5 / 17 / Side C / 4; M24×3 / P6 / 2.5P / 140 / 34 / not specified / 18 / 14.5 / 17 / Center Z / 4; M24×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Side C / 4; M24×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Center Z / 4; M24×1.5 / P4 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Side C / 4; M24×1.5 / P4 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Center Z / 4; M27×3 / P6 / 2.5P / 160 / 36 / not specified / 20 / 16 / 19 / Side C / 4; M27×3 / P6 / 2.5P / 160 / 36 / not specified / 20 / 16 / 19 / Center Z / 4; M30×3.5 / P7 / 2.5P / 180 / 40 / not specified / 22 / 18 / 21 / Side C / 4; M30×3.5 / P7 / 2.5P / 180 / 40 / not specified / 22 / 18 / 21 / Center Z / 4
REFERENCE 0307-903
JIS straight-flute carbide taps for cast iron
A coated carbide cutting direction for grey and ductile cast iron. Confirm the coating specification and actual thread.
- Geometry reference
- JIS layout; tolerance to selected thread drawing
- Coolant direction
- No internal coolant specified
- Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / flute-lobe count (mm except thread/limit/count)
- M5×0.8 / P3 / 2.5P / 62 / 16 / not specified / 5.5 / 4.5 / 7 / 3; M6×1 / P3 / 2.5P / 62 / 19 / 10 / 6 / 4.5 / 7 / 3; M8×1.25 / P4 / 2.5P / 75 / 22 / not specified / 6.2 / 5 / 8 / 3; M10×1.5 / P5 / 2.5P / 75 / 24 / not specified / 7 / 5.5 / 8 / 4; M10×1.25 / P4 / 2.5P / 75 / 24 / not specified / 7 / 5.5 / 8 / 4; M12×1.75 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / 4; M12×1.5 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / 4; M12×1.25 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / 4; M14×2 / P6 / 2.5P / 88 / 20 / not specified / 10.5 / 8 / 11 / 4; M14×1.5 / P5 / 2.5P / 88 / 20 / not specified / 10.5 / 8 / 11 / 4; M16×2 / P6 / 2.5P / 95 / 20 / not specified / 12.5 / 10 / 13 / 4; M16×1.5 / P5 / 2.5P / 95 / 20 / not specified / 12.5 / 10 / 13 / 4
REFERENCE 0307-904
JIS straight-flute carbide taps with internal coolant
Coated carbide taps with central/side coolant routes for grey/ductile iron; confirm the machining conditions.
- Geometry reference
- JIS layout; tolerance to selected thread drawing
- Coolant direction
- Side and centre outlets paired with individual rows
- Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / coolant route / flute-lobe count (mm except thread/limit/count)
- M5×0.8 / P3 / 2.5P / 57 / 16 / not specified / 5.5 / 4.5 / 7 / Side C / 3; M5×0.8 / P3 / 2.5P / 57 / 16 / not specified / 5.5 / 4.5 / 7 / Center Z / 3; M6×1 / P3 / 2.5P / 62 / 19 / 10 / 6 / 4.5 / 7 / Side C / 3; M6×1 / P3 / 2.5P / 62 / 19 / 10 / 6 / 4.5 / 7 / Center Z / 3; M8×1.25 / P4 / 2.5P / 75 / 22 / not specified / 6.2 / 5 / 8 / Side C / 3; M8×1.25 / P4 / 2.5P / 75 / 22 / not specified / 6.2 / 5 / 8 / Center Z / 3; M10×1.5 / P5 / 2.5P / 75 / 24 / not specified / 7 / 5.5 / 8 / Side C / 4; M10×1.5 / P5 / 2.5P / 75 / 24 / not specified / 7 / 5.5 / 8 / Center Z / 4; M10×1.25 / P4 / 2.5P / 75 / 24 / not specified / 7 / 5.5 / 8 / Side C / 4; M10×1.25 / P4 / 2.5P / 75 / 24 / not specified / 7 / 5.5 / 8 / Center Z / 4; M12×1.75 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / Side C / 4; M12×1.75 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / Center Z / 4; M12×1.5 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / Side C / 4; M12×1.5 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / Center Z / 4; M12×1.25 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / Side C / 4; M12×1.25 / P5 / 2.5P / 82 / 29 / not specified / 8.5 / 6.5 / 9 / Center Z / 4; M14×2 / P6 / 2.5P / 88 / 20 / not specified / 10.5 / 8 / 11 / Side C / 4; M14×2 / P6 / 2.5P / 88 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 4; M14×1.5 / P5 / 2.5P / 88 / 20 / not specified / 10.5 / 8 / 11 / Side C / 4; M14×1.5 / P5 / 2.5P / 88 / 20 / not specified / 10.5 / 8 / 11 / Center Z / 4; M16×2 / P6 / 2.5P / 95 / 20 / not specified / 12.5 / 10 / 13 / Side C / 4; M16×2 / P6 / 2.5P / 95 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 4; M16×1.5 / P5 / 2.5P / 95 / 20 / not specified / 12.5 / 10 / 13 / Side C / 4; M16×1.5 / P5 / 2.5P / 95 / 20 / not specified / 12.5 / 10 / 13 / Center Z / 4
REFERENCE 0307-905
DIN straight-flute carbide taps for cast iron
A coated carbide cutting direction for grey and ductile cast iron. Select actual shank and thread geometry.
- Geometry reference
- DIN layout; tolerance to selected thread drawing
- Coolant direction
- No internal coolant specified
- Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / flute-lobe count (mm except thread/limit/count)
- M5×0.8 / P2 / 2.5P / 70 / 15 / 10 / 6 / 4.9 / 8 / 3; M6×1 / P2 / 2.5P / 80 / 17 / 13 / 6 / 4.9 / 8 / 3; M7×1 / P3 / 2.5P / 80 / 17 / 13 / 7 / 5.5 / 8 / 3; M8×1 / P3 / 2.5P / 80 / 16 / 19 / 8 / 6.2 / 9 / 4; M8×1.25 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / 4; M10×1.5 / P4 / 2.5P / 90 / 18 / 21 / 10 / 8 / 11 / 4; M10×1.25 / P3 / 2.5P / 100 / 18 / 21 / 10 / 8 / 11 / 4; M12×1.75 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / 4; M12×1.5 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / 4; M12×1.25 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / 4; M14×2 / P5 / 2.5P / 110 / 26 / not specified / 11 / 9 / 12 / 4; M14×1.5 / P4 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / 4; M14×1.25 / P3 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / 4; M16×2 / P5 / 2.5P / 110 / 27 / not specified / 12 / 9 / 12 / 4; M16×1.5 / P4 / 2.5P / 110 / 22 / not specified / 12 / 9 / 12 / 4; M16×1.25 / P3 / 2.5P / 110 / 18 / not specified / 12 / 9 / 12 / 4; M18×2.5 / P6 / 2.5P / 125 / 30 / not specified / 14 / 11 / 14 / 4; M18×2 / P5 / 2.5P / 125 / 26 / not specified / 14 / 11 / 14 / 4; M18×1.5 / P4 / 2.5P / 125 / 25 / not specified / 14 / 11 / 14 / 4; M20×2.5 / P6 / 2.5P / 140 / 32 / not specified / 16 / 12 / 15 / 4; M20×2 / P5 / 2.5P / 140 / 27 / not specified / 16 / 12 / 15 / 4; M20×1.5 / P4 / 2.5P / 140 / 25 / not specified / 16 / 12 / 15 / 4; M22×2.5 / P6 / 2.5P / 140 / 32 / not specified / 18 / 14.5 / 17 / 4; M22×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / 4; M22×1.5 / P4 / 2.5P / 140 / 25 / not specified / 18 / 14.5 / 17 / 4; M24×3 / P6 / 2.5P / 140 / 34 / not specified / 18 / 14.5 / 17 / 4; M24×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / 4; M24×1.5 / P4 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / 4; M27×3 / P6 / 2.5P / 160 / 36 / not specified / 20 / 16 / 19 / 4; M30×3.5 / P7 / 2.5P / 180 / 40 / not specified / 22 / 18 / 21 / 4
REFERENCE 0307-906
DIN straight-flute carbide taps with internal coolant
Solid-carbide cutting taps for the agreed work material, hole and chip-control conditions. Confirm the actual flute shape and coolant routing on the approved drawing.
- Geometry reference
- DIN layout; tolerance to selected thread drawing
- Coolant direction
- Side and centre outlets paired with individual rows
- Thread / tap limit / chamfer / overall L / cutting or forming length fl / neck ln / shank d / square k / square length Lk / coolant route / flute-lobe count (mm except thread/limit/count)
- M5×0.8 / P2 / 2.5P / 70 / 15 / 10 / 6 / 4.9 / 8 / Side C / 3; M5×0.8 / P2 / 2.5P / 70 / 15 / 10 / 6 / 4.9 / 8 / Center Z / 3; M6×1 / P2 / 2.5P / 80 / 17 / 13 / 6 / 4.9 / 8 / Side C / 3; M6×1 / P2 / 2.5P / 80 / 17 / 13 / 6 / 4.9 / 8 / Center Z / 3; M7×1 / P3 / 2.5P / 80 / 17 / 13 / 7 / 5.5 / 8 / Side C / 3; M7×1 / P3 / 2.5P / 80 / 17 / 13 / 7 / 5.5 / 8 / Center Z / 3; M8×1 / P3 / 2.5P / 80 / 16 / 19 / 8 / 6.2 / 9 / Side C / 4; M8×1 / P3 / 2.5P / 80 / 16 / 19 / 8 / 6.2 / 9 / Center Z / 4; M8×1.25 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / Side C / 4; M8×1.25 / P3 / 2.5P / 90 / 16 / 19 / 8 / 6.2 / 9 / Center Z / 4; M10×1.5 / P4 / 2.5P / 90 / 18 / 21 / 10 / 8 / 11 / Side C / 4; M10×1.5 / P4 / 2.5P / 90 / 18 / 21 / 10 / 8 / 11 / Center Z / 4; M10×1.25 / P3 / 2.5P / 100 / 18 / 21 / 10 / 8 / 11 / Side C / 4; M10×1.25 / P3 / 2.5P / 100 / 18 / 21 / 10 / 8 / 11 / Center Z / 4; M12×1.75 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Side C / 4; M12×1.75 / P4 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Center Z / 4; M12×1.5 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Side C / 4; M12×1.5 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Center Z / 4; M12×1.25 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Side C / 4; M12×1.25 / P3 / 2.5P / 110 / 22 / not specified / 9 / 7 / 10 / Center Z / 4; M14×2 / P5 / 2.5P / 110 / 26 / not specified / 11 / 9 / 12 / Side C / 4; M14×2 / P5 / 2.5P / 110 / 26 / not specified / 11 / 9 / 12 / Center Z / 4; M14×1.5 / P4 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Side C / 4; M14×1.5 / P4 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Center Z / 4; M14×1.25 / P3 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Side C / 4; M14×1.25 / P3 / 2.5P / 110 / 22 / not specified / 11 / 9 / 12 / Center Z / 4; M16×2 / P5 / 2.5P / 110 / 27 / not specified / 12 / 9 / 12 / Side C / 4; M16×2 / P5 / 2.5P / 110 / 27 / not specified / 12 / 9 / 12 / Center Z / 4; M16×1.5 / P4 / 2.5P / 110 / 22 / not specified / 12 / 9 / 12 / Side C / 4; M16×1.5 / P4 / 2.5P / 110 / 22 / not specified / 12 / 9 / 12 / Center Z / 4; M16×1.25 / P3 / 2.5P / 110 / 18 / not specified / 12 / 9 / 12 / Side C / 4; M16×1.25 / P3 / 2.5P / 110 / 18 / not specified / 12 / 9 / 12 / Center Z / 4; M18×2.5 / P6 / 2.5P / 125 / 30 / not specified / 14 / 11 / 14 / Side C / 4; M18×2.5 / P6 / 2.5P / 125 / 30 / not specified / 14 / 11 / 14 / Center Z / 4; M18×2 / P5 / 2.5P / 125 / 26 / not specified / 14 / 11 / 14 / Side C / 4; M18×2 / P5 / 2.5P / 125 / 26 / not specified / 14 / 11 / 14 / Center Z / 4; M18×1.5 / P4 / 2.5P / 125 / 25 / not specified / 14 / 11 / 14 / Side C / 4; M18×1.5 / P4 / 2.5P / 125 / 25 / not specified / 14 / 11 / 14 / Center Z / 4; M20×2.5 / P6 / 2.5P / 140 / 32 / not specified / 16 / 12 / 15 / Side C / 4; M20×2.5 / P6 / 2.5P / 140 / 32 / not specified / 16 / 12 / 15 / Center Z / 4; M20×2 / P5 / 2.5P / 140 / 27 / not specified / 16 / 12 / 15 / Side C / 4; M20×2 / P5 / 2.5P / 140 / 27 / not specified / 16 / 12 / 15 / Center Z / 4; M20×1.5 / P4 / 2.5P / 140 / 25 / not specified / 16 / 12 / 15 / Side C / 4; M20×1.5 / P4 / 2.5P / 140 / 25 / not specified / 16 / 12 / 15 / Center Z / 4; M22×2.5 / P6 / 2.5P / 140 / 32 / not specified / 18 / 14.5 / 17 / Side C / 4; M22×2.5 / P6 / 2.5P / 140 / 32 / not specified / 18 / 14.5 / 17 / Center Z / 4; M22×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Side C / 4; M22×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Center Z / 4; M22×1.5 / P4 / 2.5P / 140 / 25 / not specified / 18 / 14.5 / 17 / Side C / 4; M22×1.5 / P4 / 2.5P / 140 / 25 / not specified / 18 / 14.5 / 17 / Center Z / 4; M24×3 / P6 / 2.5P / 140 / 34 / not specified / 18 / 14.5 / 17 / Side C / 4; M24×3 / P6 / 2.5P / 140 / 34 / not specified / 18 / 14.5 / 17 / Center Z / 4; M24×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Side C / 4; M24×2 / P5 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Center Z / 4; M24×1.5 / P4 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Side C / 4; M24×1.5 / P4 / 2.5P / 140 / 27 / not specified / 18 / 14.5 / 17 / Center Z / 4; M27×3 / P6 / 2.5P / 160 / 36 / not specified / 20 / 16 / 19 / Side C / 4; M27×3 / P6 / 2.5P / 160 / 36 / not specified / 20 / 16 / 19 / Center Z / 4; M30×3.5 / P7 / 2.5P / 180 / 40 / not specified / 22 / 18 / 21 / Side C / 4; M30×3.5 / P7 / 2.5P / 180 / 40 / not specified / 22 / 18 / 21 / Center Z / 4
REFERENCE 0307-907
Metric HSS round and hexagonal dies
Select the metric thread and its paired die diameter/thickness; customized geometry is subject to drawing review.
- Thread / die outside dimensions — units shown individually
- M17×0.75 / 45×14; M21×0.75 / 45×14; M25×1 / 55×16; M30×2 / 65×18; M17×1 / 45×14; M21×1 / 45×14; M25×1.5 / 55×16; M30×3 / 65×18; M17×1.5 / 45×14; M21×1.5 / 45×14; M25×2 / 55×16; M30×3.5 / 65×25; M18×0.5 / 45×14; M21×2 / 45×14; M26×0.5 / 55×16; M32×1 / 65×18; M18×0.75 / 45×14; M22×0.5 / 55×16; M26×0.75 / 55×16; M32×1.5 / 65×18; M18×1 / 45×14; M22×0.75 / 55×16; M26×1 / 55×16; M32×3 / 65×18; M18×1.25 / 45×14; M22×1 / 55×16; M26×1.5 / 55×16; M33×1 / 65×18; M18×1.5 / 45×14; M22×1.5 / 55×16; M26×2 / 55×16; M33×1.5 / 65×18; M18×2 / 45×14; M22×2 / 55×16; M27×0.5 / 65×18; M33×2 / 65×18; M18×2.5 / 45×18; M22×2.5 / 55×22; M27×0.75 / 65×18; M33×3.5 / 65×25; M19×0.5 / 45×14; M23×0.5 / 55×16; M27×1 / 65×18; M34×1 / 65×18; M19×0.75 / 45×14; M23×0.75 / 55×16; M27×1.5 / 65×18; M34×1.5 / 65×18; M19×1 / 45×14; M23×1 / 55×16; M27×2 / 65×18; M34×2 / 65×18; M19×1.5 / 45×14; M23×1.5 / 55×16; M27×3 / 65×25; M34×3 / 65×25; M19×2 / 45×14; M23×2 / 55×16; M28×0.5 / 65×18; M35×1 / 65×18; M20×0.5 / 45×14; M24×0.5 / 55×16; M28×0.75 / 65×18; M35×1.5 / 65×18; M20×0.75 / 45×14; M24×0.75 / 55×16; M28×1 / 65×18; M35×2 / 65×18; M20×1 / 45×14; M24×1 / 55×16; M28×1.5 / 65×18; M35×3 / 65×25; M20×1.25 / 45×14; M24×1.5 / 55×16; M28×2 / 65×18; M36×1 / 65×18; M20×1.5 / 45×14; M24×2 / 55×16; M30×0.5 / 65×18; M36×1.5 / 65×18; M20×2 / 45×14; M24×3 / 55×22; M30×0.75 / 65×18; M36×2 / 65×18; M20×2.5 / 45×18; M25×0.5 / 55×16; M30×1 / 65×18; M36×3 / 65×25; M21×0.5 / 45×14; M25×0.75 / 55×16; M30×1.5 / 65×18; M36×4 / 65×25
REFERENCE 0307-908
Round dies with inch outside diameters
HSS or alloy-tool-steel round dies pair metric threads with specific inch outside diameters.
- Thread / die outside dimensions — units shown individually
- M2.3x0.4 / 1"; M2.5x0.45 / 13/16"; M2.5x0.45 / 1"; M2.6x0.45 / 13/16"; M2.6x0.45 / 1"; M3x0.5 / 13/16"; M3x0.5 / 1"; M3x0.6 / 13/16"; M3x0.6 / 1"; M3.5x0.6 / 13/16"; M3.5x0.6 / 1"; M4x0.5 / 13/16"; M4x0.5 / 1"; M4x0.7 / 13/16"; M4x0.7 / 1"; M4.5x0.5 / 13/16"; M4.5x0.5 / 1"; M4.5x0.75 / 13/16"; M4.5x0.75 / 1"; M5x0.5 / 13/16"; M5x0.5 / 1"; M5x0.8 / 13/16"; M5x0.8 / 1"; M5x0.9 / 13/16"; M5x0.9 / 1"; M6x0.5 / 13/16"; M6x0.5 / 1"; M6x0.75 / 13/16"; M6x0.75 / 1"; M6x1 / 13/16"; M6x1 / 1"; M6.3x1.0 / 1"; M7x0.75 / 1"; M7x1 / 1"; M8x0.75 / 1"; M8x1 / 1"; M8x1.25 / 1"; M9x1 / 1"; M9x1 / 1-1/2"; M9x1.25 / 1"; M9x1.25 / 1-1/2"; M10x0.75 / 1"; M10x0.75 / 1-1/2"; M10x1 / 1"; M10x1 / 1-1/2"; M10x1.25 / 1"; M10x1.25 / 1-1/2"; M10x1.5 / 1"; M10x1.5 / 1-1/2; M11x1 / 1; M11x1 / 1-1/2; M11x1.5 / 1"; M11x1.5 / 1-1/2"; M12x1 / 1"; M12x1 / 1-1/2"; M12x1.25 / 1"; M12x1.25 / 1-1/2"; M12x1.5 / 1-1/2"; M12x1.75 / 1-1/2"; M14x1 / 1-1/2"; M14x1.25 / 1-1/2"; M14x1.5 / 1-1/2"; M14x2 / 1-1/2"; M15x1.5 / 1-1/2"; M15x1.5 / 2"; M16x1 / 1-1/2"; M16x1 / 2"; M16x1.5 / 1-1/2"; M16x1.5 / 2"; M16x2 / 1-1/2"; M16x2 / 2"; M17x1.5 / 1-1/2"; M17x1.5 / 2"; M18x1.5 / 1-1/2"; M18x1.5 / 2"; M18x2 / 1-1/2"; M18x2 / 2"; M18x2.5 / 1-1/2"; M18x2.5 / 2"; M20x1.5 / 1-1/2"; M20x1.5 / 2"; M20x2 / 1-1/2"; M20x2 / 2"; M22x2.5 / 2"; M24x1.5 / 2"; M24x1.5 / 2-1/2"; M24x2 / 2"; M24x2 / 2-1/2"; M24x3 / 2-1/2"; M27x2 / 2-1/2"; M27x3 / 2-1/2"; M28x2 / 2-1/2"; M30x1.5 / 2-1/2"; M30x2 / 2-1/2"; M30x3 / 2-1/2"; M30x3.5 / 2-1/2"; M33x3 / 2-1/2"; M33x3.5 / 2-1/2"; M36x3 / 2-1/2"; M36x4 / 3"; M39x3 / 3"; M39x4 / 3"
REFERENCE 0307-909
BSW and BSF thread-cutting dies
HSS or alloy-tool-steel dies with British coarse/fine thread combinations. Specify the complete thread designation and paired die dimensions.
- Thread / die outside dimensions — units shown individually
- 1/8-40BSW / 20x5mm; 3/16-24BSW / 20x7mm; 3/16-32BSF / 20x7mm; 1/4-20BSW / 25x9mm; 1/4-26BSF / 25x9mm; 5/16-18BSW / 25x9mm; 5/16-22BSF / 25x9mm; 3/8-18BSW / 30x11mm; 3/8-20BSF / 30x11mm; 7/16-14BSW / 30x11mm; 7/16-18BSF / 30x11mm; 1/2-12BSW / 38x14mm; 1/2-16BSF / 38x10mm; 9/16-12BSW / 38x14mm; 9/16-16BSF / 38x10mm; 5/8-11BSW / 45x18mm; 5/8-14BSF / 45x14mm; 11/16-11BSW / 45x18mm; 11/16-14BSF / 45x14mm; 3/4-10BSW / 45x18mm; 3/4-12BSF / 45x14mm; 7/8-9BSW / 55x22mm; 7/8-11BSF / 55x22mm; 1-8BSW / 55x22mm; 1-10BSF / 55x22mm; 1-1/8-7BSW / 65x25mm; 1-1/8-9BSF / 65x25mm; 1-1/4-7BSW / 65x25mm; 1-1/4-9BSF / 65x25mm; 1-1/2-6BSW / 75x30mm; 1-1/2-8BSF / 75x30mm; 1-3/4-5BSW / 90x36mm; 1-3/4-7BSF / 90x36mm; 2-4-1/2BSW / 90x36mm; 2-7BSF / 90x36mm; 2-1/4-4BSW / 105x36mm; 2-1/4-6BSF / 105x36mm; 2-1/2-4BSW / 120x36mm; 2-1/2-6BSF / 120x36mm; 2-3/4-3-1/2BSW / 120x36mm; 2-3/4-6BSF / 120x36mm
REFERENCE 0307-910
UNC, UNF and special unified dies
HSS or alloy-tool-steel dies with coarse, fine and indicated special unified thread forms; quote the complete designation.
- Thread / die outside dimensions — units shown individually
- No.0-80UNF / 16x5mm; No.1-64UNC / 16x5mm; No.1-72UNF / 16x5mm; No.2-56UNC / 16x5mm; No.2-64UNF / 16x5mm; No.3-48UNC / 16x5mm; No.3-56UNF / 16x5mm; No.4-40UNC / 20x5mm; No.4-48UNF / 20x5mm; No.5-40UNC / 20x5mm; No.5-44UNF / 20x5mm; No.6-32UNC / 20x5mm; No.6-40UNF / 20x5mm; No.8-32UNC / 20x5mm; No.8-36UNF / 20x5mm; No.10-24UNC / 20x7mm; No.10-32UNF / 20x7mm; No.12-24UNC / 20x7mm; No.12-28UNF / 20x7mm; 1/4-20UNC / 20x7mm; 1/4-28UNF / 20x7mm; 5/16-18UNC / 25x9mm; 5/16-24UNF / 25x9mm; 3/8-16UNC / 30x11mm; 3/8-24UNF / 30x11mm; 7/16-14UNC / 30x11mm; 7/16-20UNF / 30x11mm; 1/2-13UNC / 38x14mm; 1/2-20UNF / 38x10mm; 9/16-12UNC / 38x14mm; 9/16-18UNF / 38x10mm; 5/8-11UNC / 45x18mm; 5/8-18UNF / 45x14mm; 3/4-10UNC / 45x18mm; 3/4-16UNF / 45x14mm; 7/8-9UNC / 55x22mm; 7/8-14UNF / 55x16mm; 1-8UNC / 55x22mm; 1-12UNF / 55x16mm; 1-14NS / 55x16mm; 1-1/8-7UNC / 65x25mm; 1-1/8-12UNF / 65x18mm; 1-1/4-7UNC / 65x25mm; 1-1/4-12UNF / 65x18mm; 1-3/8-6UNC / 65x25mm; 1-3/8-12UNF / 65x18mm; 1-1/2-6UNC / 75x30mm; 1-1/2-12UNF / 75x20mm; 1-3/4-5UNC / 90x36mm; 2-4-1/2UNC / 90x36mm
REFERENCE 0307-911
Cylindrical and tapered pipe-thread taps
HSS tools for internal pipe threads. Specify cylindrical or tapered thread, gauge and sealing requirement; recommended pilot holes need process approval.
- Thread / overall L / thread Lc / shank d / square k — drawing dimensions to confirm
- G1/8-28 / 59 / 8.5 / 8 / 6.2; G1/4-19 / 67 / 13 / 11 / 9; G3/8-19 / 75 / 13 / 14 / 12; G1/2-14 / 87 / 16 / 18 / 14.5; G3/4-14 / 96 / 16 / 22 / 18; G1-11 / 96 / 16 / 26 / 22; ZG1/8-28 / 96 / 16 / 8 / 6.2; ZG1/4-19 / 96 / 16 / 11 / 9; ZG3/8-19 / 96 / 16 / 14 / 12; ZG1/2-14 / 96 / 16 / 18 / 14.5; ZG3/4-14 / 96 / 16 / 22 / 18; ZG1-11 / 96 / 16 / 26 / 22
REFERENCE 0307-912
Thread-insert installation taps
Dedicated HSS taps create the installation thread for the selected stainless-steel wire insert; match the insert system and installation drawing.
- Thread / overall L / thread Lc / shank d / square k — drawing dimensions to confirm
- STI2×0.4 / 44.5 / 9.5 / 2.8 / 2.24; STI2.5×0.45 / 48 / 11 / 3.35 / 2.8; STI3×0.5 / 53 / 13 / 4 / 3.15; STI4×0.7 / 58 / 16 / 5 / 4.5; STI5×0.8 / 66 / 19 / 6.3 / 5; STI6×1 / 72 / 22 / 6.3 / 5; STI8×1.25 / 80 / 24 / 8 / 6.3; STI10×1.5 / 80 / 29 / 9 / 7.1; STI12×1.75 / 95 / 30 / 11.2 / 9
REFERENCE 0307-913
HSS combination drilling, tapping and deburring tools
Combined drilling, threading and countersinking/deburring geometry for selected power-drill or bench-drill assembly work. Specify workpiece thickness and machine control; titanium-coated directions are available for review.
- Thread / overall L / drill d1 / pitch P — drawing dimensions to confirm
- M3 / 65 / 2.5 / 0.5; M4 / 65 / 3.3 / 0.7; M5 / 69 / 4.2 / 0.8; M6 / 69 / 5 / 1; M8 / 72 / 6.8 / 1.25; M10 / 72 / 8.5 / 1.5; M12 / 80 / 10.3 / 1.75
REFERENCE 0307-914
Hexagonal dies for metric and inch threading
Hexagonal dies are specified by the complete thread and paired across-flats and thickness. Pipe-thread families, metric sizes and unified inch sizes are separate configurations.
- Thread directions
- NPT, NPS, BSPT, BSPS and metric/unified inch forms — complete designation required
- Pipe nominal size / metric nominal range / inch thread / across flats / thickness B — dimensions subject to approved drawing/units
- NPT NPS / 6mm / 1/4-20NC 1/4-28NF / 19/32" / 1/4"; BSPT BSPS / 7~8mm / 5/16-18NC 5/16-24NF / 11/16" / 5/16"; 1/8" / 9~10mm / 3/8-16NC 3/8-24NF / 25/32" / 3/8"; not specified / 11mm / 7/16-14NC 7/16-20NF / 7/8" / 7/16"; 1/4" / 12~13mm / 1/2-13NC 1/2-20NF / 1-1/16" / 1/2"; not specified / 14mm / 9/16-12NC 9/16-18NF / 1-1/16" / 1/2"; 3/8" / 15~16mm / 5/8-11NC 5/8-18NF / 1-1/4" / 5/8"; 1/2" / 17~20mm / 3/4-10NC 3/4-16NF / 1-7/16" / 3/4"; not specified / 21~23mm / 7/8-9NC 7/8-14NF / 1-5/8" / 7/8"; 3/4" / 24~26mm / 1-8NC 1-12NF 1-14NS / 1-13/16" / 1"; not specified / 27~30mm / 1-1/8-7NC 1-1/8-12NF / 2" / 1"; 1"" / 31~33mm / 1-1/4-7NC 1-1/4-12NF / 2-3/16" / 1"; not specified / 34~35mm / 1-3/8-6NC 1-3/8-12NF / 2-3/8" / 1"; 1-1/4" / 36~40mm / 1-1/2-6NC 1-1/2-12NF / 2-9/16" / 1"; not specified / 41~42mm / NC&NF 1-5/8 / 3-1/8" / 1""; not specified / 43~45mm / 1-3/4 / 3-1/8" / 1""; 1-1/2" / 46~48mm / 1-7/8 / 3-1/8" / 1 1/4"; not specified / 50~52mm / 2 / 3-1/2" / 1 1/4"; 1-3/4" / 53~57mm / 2-1/4 / 3-1/2" / 1 1/4"; 2" / 58~60mm / 2-3/8 / 4-1/2" / 1 1/2"; 2" / 63~65mm / 2-1/2 / 4-1/2" / 1 1/2"; not specified / 65~68mm / 2-5/8 / 4-1/2" / 1 5/8"; not specified / 69~70mm / 2-3/4 / 4-1/2" / 1 5/8"; not specified / 70~72mm / 2-7/8 / 5" / 1 3/4"; 2-1/2" / 75~88mm / 3~3-1/2 / 5" / 2"; not specified / 100~112mm / 4~4-1/2 / 7" / 2 3/8"; not specified / 115~127mm / 4-5/8~5 / 7" / 2 1/2"
REFERENCE 0307-915
Carbide-tip masonry, tile and multi-material drills
Ground carbide points and distinct tip forms serve masonry, tile, wood, plastics and selected soft-metal tasks. Select the actual tip and rotary/impact mode for the substrate.
- Diameter / shank
- 3–12 mm / hex; 3–25 mm / straight
REFERENCE 0307-916
Carbide hammer drills with slotted-drive shanks
Carbide heads, a narrow land and wide dust-removal flute provide a construction-drilling direction. Confirm the hammer holder and head geometry.
- Diameter / overall length / holder
- 4–26 mm / 110,160,210,260,310,360,450,600,1000 mm / SDS-plus; 12–32 mm / 370,570,920,1320 mm / SDS-max
REFERENCE 0307-917
Shot-blasted steel chisels
Special-steel chisels have a shot-blasted surface. Point, flat, tile, hollow, cranked-gouge, winged, wide, toothed, sharpened-flat and textured-hammer forms serve different removal tasks.
- Rod diameter / overall length / holder
- 14–16 mm / 180,250,260 mm / SDS-plus; 18 mm / 240,280,300,360,400,460,500,600 mm / SDS-max
- Machine mode
- Rotation-stop chiselling
REFERENCE 0307-918
Ground-rod driver sockets
Select the socket opening and hammer interface for the ground rod. Confirm rod/head fit before ordering.
- Opening / holder
- 16 or20 mm / SDS-plus; 27 mm / SDS-max; 30 mm / hex
- Other opening
- 50 mm; exact hammer interface requires drawing
REFERENCE 0307-919
Floor and tile-removal chisels
Wide hardened-steel ends remove tile and adhesive. Match the working width and hammer interface.
- Dimensions / interface
- 14×185×75;14×250×40 mm / SDS-plus; 18×380×152 mm / SDS-max
REFERENCE 0307-920
Bolted floor-scraper chisels
Replaceable wide scraper blades use bolt and nut fasteners for floor adhesive, carpet, linoleum or tile-removal work.
- Dimensions / interface
- 14×275×125;14×275×100;18×300×100 mm / SDS-plus; 18×300×100;18×300×150 mm / SDS-max
REFERENCE 0307-921
Thin diamond cutting and grinding discs
A combined cutting/grinding direction for ceramic, porcelain, granite and hard tiles. Confirm the permitted wet/dry operation and marked speed for the exact disc.
- Diameter / bore
- 115/22;125/22;150/22;180/22;230/22 mm
REFERENCE 0307-922
Hot-pressed turbo-mesh diamond blades
A hot-pressed mesh/turbo edge direction for ceramic, porcelain, granite and hard tile cutting.
- Diameter / bore
- 105/20;110/20;115/22;125/22;150/22;180/22;200/22;230/22;250/25.4;300/25.4;350/25.4 mm
REFERENCE 0307-923
Laser-welded construction diamond blades
Laser-welded segments provide a cutting direction for granite, concrete or asphalt. Match the segment and operating conditions to the material.
- Diameter / bore
- 105/20;115/22;125/22;150/22;180/22;200/22;230/22;250/25.4;300/25.4;350/25.4;400/25.4;450/25.4;500/25.4;600/25.4 mm
REFERENCE 0307-924
Hot-pressed construction diamond blades
Select the rim/segment construction for concrete, granite, marble, brick or block.
- Diameter / bore
- 105/20;110/20;115/22;125/22;150/22;180/22;200/22;230/22;250/25.4;300/25.4;350/25.4 mm
REFERENCE 0307-925
Brazed diamond multi-material blades
Diamond-brazed edges offer separate stone, metal, wood and PVC cutting directions. Confirm the actual blade specification and machine approval.
- Diameter / bore
- 100/16;105/22;115/22;125/22;180/22;230/22;300/25.4;350/25.4 mm
REFERENCE 0307-926
Brazed diamond blades for stone slabs
A cutting and grinding direction for rock slabs, marble and ceramic tile.
- Diameter / bore
- 100/20 or22;115/22;125/22 mm
REFERENCE 0307-927
Diamond cup grinding wheels
A heat-treated steel body carries diamond grinding segments for concrete, masonry and stone surface removal.
- Diameter / bore
- 100/16;115/22;125/22;180/22;230/22 mm
REFERENCE 0307-928
Vacuum-brazed cutting and grinding discs
Vacuum-brazed diamond abrasive provides a combined tile, glass, stone and concrete processing direction.
- Diameter / bore
- 100/20 or22;115/22;125/22 mm
REFERENCE 0307-929
Carbide-toothed hollow core drills
Carbide teeth and a hollow body create construction openings for services and junction-box work. Confirm the holder and rotary/hammer mode.
- Diameter / connection
- 25–120 mm / M14;25–120 mm / SDS-plus
REFERENCE 0307-930
Electroplated diamond hole saws
Electroplated diamond rims offer a drilling direction for ceramic, marble, granite, tile and glass. Confirm cooling and the permitted machine setup.
- Diameter / connection
- 4–120 mm / M14, hex, 1-1/4 UNC or straight shank; thread detail requires approved drawing
REFERENCE 0307-931
Laser-welded diamond core drills
Laser-welded core-drill bodies serve stone and construction openings. Select segment, wall and connection geometry.
- Diameter range
- 25–450 mm
- Connection
- Approved drawing required
REFERENCE 0307-932
Brazed diamond hole saws
Brazed diamond heads offer granite, marble, ceramic and concrete drilling directions.
- Diameter / connection
- 5–150 mm / M14;5–16 mm / hex;20–200 mm / 1-1/4 UNC;5–16 or40–70 mm / straight shank
REFERENCE 0307-933
Brazed diamond drilling and milling heads
Use the selected diamond shape to enlarge or mill holes in porcelain, quartz, granite and marble.
- Diameter / connection
- 4–35 mm / M14;7.2 mm / straight shank
REFERENCE 0307-934
Brazed diamond stone router profiles
Profiled diamond heads offer groove milling in marble, granite, ceramic and quartz.
- Diameter / shank
- 20/12.7;30/12.7;40/12.7 mm
- Profile selection
- Select the required edge profile from a drawing
REFERENCE 0307-935
Brazed diamond CNC engraving heads
Cylinder, sphere and cone heads provide CNC stone-carving directions.
- Cutting diameter
- 3–16 mm
- Shank diameter
- 6–16 mm
REFERENCE 0307-936
Brazed diamond hole chamfer heads
Conical diamond geometry trims or shapes existing holes in porcelain, marble, ceramic and granite.
- Diameter range / connection
- 2–38 mm / M14;20–48 mm / M14
REFERENCE 0307-937
Brazed diamond grout-cleaning discs
Small diamond discs provide access to grout seams in tile and marble walls.
- Diameter / bore
- 30/6;40/6;60/16;80/20;100/20 mm
REFERENCE 0307-938
Depressed brazed diamond grinding wheels
A depressed wheel profile offers cutting, grinding, chamfering and shaping directions for tile, stone and selected plastics.
- Diameter / bore
- 100/16;115/22 mm
REFERENCE 0307-939
Threaded brazed diamond grinding discs
Threaded diamond discs provide stone and tile grinding/polishing directions.
- Diameter / connection
- 115 mm / M14
REFERENCE 0307-940
Ventilated brazed diamond grinding wheels
Ventilated diamond wheels offer grinding directions for cast iron, ceramics, stone and brittle composites.
- Diameter / bore
- 100/16;115/22;125/22;150/22;180/22 mm
REFERENCE 0307-941
Shaped brazed diamond profile wheels
Shaped diamond wheels provide edge, curve, chamfer and smoothing operations on marble, quartz and engineered stone.
- Diameter × width / bore
- 75×5;75×10;75×15;75×20;75×25;75×30;75×35;75×40 mm /20 mm
REFERENCE 0307-942
Brazed diamond mounted grinding heads
Cylindrical, spherical and conical diamond-mounted heads serve grinding, shaping and trimming on stone, ceramics and selected cast-iron work.
- Shank diameter
- 6 mm
REFERENCE 0307-943
Brazed diamond bullnose profile wheels
Profiled diamond wheels shape stone slab edges; specify radius and profile drawing.
- Diameter / connection
- 65–100 mm / M14
REFERENCE 0307-944
Diamond-bead wire saws
Diamond wire provides a separate stone-quarrying and concrete-cutting direction. Confirm the dedicated wire-saw machine, joint and operating setup.
- Bead diameter
- 6.3–11.5 mm
- Beads per metre
- 28–40
REFERENCE 0307-945
Left and right PCD laminate circular saw blades
PCD-tipped blades provide handed cutting directions for laminate and wood processing. Specify direction, saw spindle and tooth geometry.
- Diameter / bore / teeth / direction
- 300/30 mm /46 /left or right;300/80 mm /64 /left or right
REFERENCE 0307-946
PCD fibre-cement and board saw blades
PCD tips provide separate fibre-cement and construction-board cutting directions. Match the blade and extraction setup to the actual board.
- Diameter / bore / teeth
- 115/10 mm /4;165/16 mm /4;184/16 mm /4 or5;254/16 mm /6 or12;305/30 mm /96
REFERENCE 0307-947
Industrial carbide-tip wood crosscut blades
Carbide-tooth circular blades cover separate diameter/tooth combinations for hardwood and softwood crosscutting.
- Diameter mm / tooth-count choices
- 115/18,24,36;136/18,24,36;140/18,24,36;150/18,24,40;165/18,24,40;184/24,40,60;200/24,40,60;210/24,40,60;215/24,40,60;254/32,40,60,80;305/80,100,120;350/80,100,120
REFERENCE 0307-948
Carbide-tip panel saw blades
A fine-tooth panel direction for veneered particleboard, MDF and plywood. Confirm panel thickness, scoring arrangement and machine interface.
- Diameter / bore / teeth
- 300/30 mm /96
- Panel reference
- Below35 mm in the selected application; verify actual panel and machine
REFERENCE 0307-949
Single and split scoring blades
Single and double-row carbide-tooth scoring directions support panel processing. Confirm the scoring kerf and matching main blade.
- Diameter / bore / teeth
- 120/20 mm /24 single;120/20 mm /12+12 double
REFERENCE 0307-950
Large carbide-tip circular panel blades
Large circular blades serve ripping and crosscut directions on suitable panel saws. Select the spindle, kerf and tooth form.
- Diameter / bore / teeth
- 350/30 mm /72 or84
REFERENCE 0307-951
Coated carbide-tip wood saw blades
A non-stick coated direction offers separate tooth schedules for wood crosscutting; confirm the required coating chemistry.
- Diameter mm / tooth-count choices
- 115/18,24,36;136/18,24,36;140/18,24,36;150/18,24,40;160/18,24,40;165/24,40,48,60;184/24,40,60;200/24,40,60;210/24,40,60;215/24,40,48,60;254/32,40,60,80;305/80,100,120;350/80,100,120
REFERENCE 0307-952
Metric carbide-tip crosscut blade combinations
Match the bore, tooth count and diameter rather than substituting an inch conversion.
- Diameter / bore / teeth
- 165/16 mm /24;184/20 mm /24;254/16 mm /40;305/25.4 mm /80
REFERENCE 0307-953
Multi-material carbide-tip circular blades
A specific carbide-tooth direction covers wood and selected thin ferrous/aluminium sheet. Confirm the saw approval and material section.
- Diameter / bore / teeth
- 190/30 mm /38
- Sheet reference
- 1–2 mm iron/aluminium application; operating conditions require approval
REFERENCE 0307-954
Aluminium-profile carbide-tip saw blades
A fine-tooth direction for aluminium door/window and cold-drawn profiles; confirm section support and the spindle.
- Diameter / bore / teeth
- 254/16 mm /100
REFERENCE 0307-955
Fine-tooth circular blades for soft materials
High tooth-count circular blades cover softwood, plastics and selected copper work.
- Diameter / bore / teeth
- 184/16 mm /140;254/16 mm /180
REFERENCE 0307-956
Lightweight coated blades for cordless wood saws
A lightweight coated direction is offered for selected cordless saw applications. Confirm the exact saw, guard and arbor.
- Diameter / bore / teeth
- 125/22.2 mm /24;140/22.2 mm /24;150/22.2 mm /24;165/22.2 mm /24;184/22.2 mm /24
REFERENCE 0307-957
Cordless wood blades with multiple tooth schedules
Separate coated and uncoated directions cover wood and wood-based panels; match the tooth schedule to the cut.
- Diameter / bore mm / tooth-count options
- 115/20/25,40;165/16/25,40,50;184/16/25,40,45,50,60;254/16/40,50,60,80;305/16/60,80,100
- Surface directions
- Coated and uncoated configurations; chemical specification to approve
REFERENCE 0307-958
Thirty-degree-tooth coated saw blades
A selected tooth-angle direction for hardwood, laminate and composite board on an approved cordless saw.
- Diameter / bore / teeth
- 125/20 mm /45;125/22.2 mm /45
- Tooth angle
- 30°
REFERENCE 0307-959
Stacked dado blade and chipper sets
Carbide-tip outside blades, chippers and stainless-steel shims provide adjustable grooving configurations. Approve the complete component bill and machine guarding.
- Outside blades
- 8-inch /24 teeth;2 outside blades
- Arbor reference
- 5/8 inch
- Groove reference
- 1/4–7/8 inch; final stack and machine approval required
- Components
- Two outside blades,1/8-inch2-tooth and1/16-inch2-tooth chippers, stainless-steel shims; chipper count to confirm
REFERENCE 0307-960
Vacuum-brazed diamond multi-material discs
Diamond grit is brazed to a steel core edge, with abrasive material on both faces. Select the actual disc for stone, PVC, metal or nail-embedded wood tasks.
- Diameter / bore
- 100/22.23;115/22.23;125/22.23;180/22.23;230/22.23 mm
REFERENCE 0307-961
Tungsten-carbide grit multi-material discs
An abrasive edge with line grooves and relief holes offers a separate laminate, plastic and composite cutting direction.
- Diameter / bore
- 100/22.23;115/22.23;125/22.23 mm
REFERENCE 0307-962
Left/right CNC dowel drills
Blind-hole dowel drills use a round shank with clamping flat and end screw.
- Cutting diameter
- 3–15 mm
- Shank diameter
- 10 mm
REFERENCE 0307-963
Left/right brad-point boring drills
Brad-point blind-hole drills use a clamping flat and screw for panel-boring systems.
- Cutting diameter
- 5–15 mm
- Shank diameter
- 10 mm
REFERENCE 0307-964
Carbide-tip hinge boring drills
Two-wing and three-wing directions support hinge-boring work; confirm the handed configuration.
- Cutting diameter
- 15–60 mm
- Shank diameter
- 10 mm
REFERENCE 0307-965
Spiral-flute carbide hinge boring drills
A carbide head with spiral flute and chipbreaker direction supports panel hinge boring.
- Cutting diameter
- 35 mm
- Shank diameter
- 10 mm
REFERENCE 0307-966
Carbide-tip through-hole boring drills
A plug-in welded carbide tip and V-point serve through-hole panel drilling; confirm the selected flute and direction.
- Cutting diameter
- 6–12 mm
- Shank diameter
- 10 mm
REFERENCE 0307-967
Dowel drills with carbide countersink
A carbide drill/countersink combination makes a pilot and screw recess in one tool setup.
- Cutting diameter
- 3–12 mm
- Shank diameter
- 12.7 mm
REFERENCE 0307-968
Solid-carbide V-point through-hole drills
Left/right carbide V-point drills use a clamping flat and screw for wood-based panel boring.
- Cutting diameter
- 3–8 mm
- Shank diameter
- 10 mm
REFERENCE 0307-969
Solid-carbide brad-point dowel drills
A brad point, clamping flat and end screw provide a blind-hole CNC dowel-drilling direction; confirm the actual cutting direction.
- Cutting diameter
- 2–8 mm
- Shank diameter
- 10 mm
REFERENCE 0307-970
Carbide rough-cut spiral mills for panels
A two-flute compression/spiral direction covers hardwood, OSB, laminate and selected board.
- Cutting diameter
- 3–12 mm
- Shank diameter
- 12.7 mm
REFERENCE 0307-971
Carbide-tip straight router cutters
Two-flute, three-flute and three-flute chipbreaker directions support slotting, milling, circular routing and boring.
- Cutting diameter
- 3–12 mm
- Shank diameter
- 12.7 mm
REFERENCE 0307-972
Solid-carbide upcut spiral router bits
Two- and three-flute upcut directions clear chips from grooves, slots, mortises and dados.
- Cutting diameter
- 6–12 mm
- Shank diameter
- 6–12 mm
REFERENCE 0307-973
Solid-carbide downcut spiral router bits
Two- and three-flute downcut directions serve wood, MDF, acrylic, PVC and selected plastics.
- Cutting diameter
- 6–12 mm
- Shank diameter
- 6–12 mm
REFERENCE 0307-974
Carbide compression spiral bits with chipbreakers
Two- and three-flute compression directions process double-faced panels, wood, PVC and acrylic.
- Cutting diameter
- 4–12 mm
- Shank diameter
- 4–12 mm
REFERENCE 0307-975
Solid-carbide ball-nose wood router bits
Two upward-spiral cutting edges provide a carving and trimming direction.
- Cutting diameter
- 3–16 mm
- Shank diameter
- 3–16 mm
REFERENCE 0307-976
Three-spiral lock-mortise cutters
An upcut roughing spiral and polished flute direction offers door-lock slotting on approved routing equipment.
- Cutting diameter
- 16–22 mm
- Shank diameter
- 16 mm
- Stated extended geometry
- 16×55/105×D16×165 mm; exact dimension labels to approved drawing
REFERENCE 0307-977
Carbide-tip profile router bits
Profiled carbide-tip cutters support cabinetry and wood-panel routing. Supply the required profile drawing.
- Cutting diameter
- 21.8–88.9 mm
- Shank diameter
- 12.7 mm
REFERENCE 0307-978
Tapered ball-nose carving bits
Solid-carbide tapered ball noses support CNC three-dimensional carving and pattern work.
- Tip radius / stated length / taper
- 1/64 inch /1-1/2 inch×3L /4.2°;1/16 inch /1-1/2 inch×3L /2.4°;1/32 inch /1-1/2 inch×3L /3.6°
- Shank
- Select6 mm or1/4-inch drawing; these interfaces are not interchangeable
REFERENCE 0307-979
Single-flute carbide engraving tools
Half-round single-flute tips offer engraving angles for wood, plastic, aluminium and solid-surface materials.
- Angle choices
- 15°,30°,45°
- Length / shank
- 2-1/2 inch /6.35 mm
- Tip
- Approve actual tip width and units on drawing
REFERENCE 0307-980
Three-flute carbide V-groove cutters
V-groove tools provide chamfering and grooving directions for hardwood, MDF, veneer and composites.
- Diameter / length / angle / shank
- 7/8 inch /2-1/2 inch /30°,60°or90° /6.35 mm
REFERENCE 0307-981
Coated HSS end-mill and drilling cutters
A single-flute upcut coated-HSS direction supports aluminium-profile routing, drilling and slotting.
- Stated dimensions / shank
- 6×16×100 /8;8×30×100 /8;4.5×5×80 /8 mm; approve dimension order on drawing
REFERENCE 0307-982
Aluminium honeycomb panel milling cutters
Single-flute upcut cutters use polished chip grooves for honeycomb-panel routing and drilling.
- Stated cutting dimensions / shank
- 6×22 /13;8×22 /13;8×40 /10 mm; interface to approved drawing
REFERENCE 0307-983
Carbide-tip hinge/lock-slot cutters
Carbide-tip cutters provide a long-body door hardware machining direction.
- Stated dimensions / shank
- 13×35×150 /16;13×35×150 /18 mm; confirm dimension order
REFERENCE 0307-984
Three-flute TiN HSS tapered cutters
Ground HSS and cobalt-bearing HSS directions offer a TiN surface for selected aluminium and wood machining.
- Diameter directions / shank
- 2–12;3–12;4–12 mm /12 mm
REFERENCE 0307-985
Bearing-guided trimming cutters
A bearing guide and coated cutting direction serve edge trimming and chamfering of panels and solid wood.
- Stated dimensions / shank
- 6×28.58×75 /6;6.35×28.58×76.2 /6.35;8×32×80 /8;8×45×100 /8;12.7×38×101.6 /13 mm; final drawing governs
REFERENCE 0307-986
Double-ended helical flush-trim cutters
Double-ended geometry and helical flutes support panel cutting and grooving; coating is a selectable direction.
- Stated dimensions / shank
- 4×60×120 /4;5×80×150 /5;6×80×150 /6;6×100×165 /6;6×125×180 /6;8×80×150 /8;8×100×165 /8;8×130×200 /8 mm
REFERENCE 0307-987
Aluminium-body pre-milling cutterheads
Detachable carbide knives and overlapping spiral cuts provide panel end-face truing for an edge-banding machine.
- Diameter / bore / height / teeth
- 125/30/65 mm /18;100/30/51 mm /4
- Direction
- Left/right orientation to approved drawing
REFERENCE 0307-988
Vertical spiral cutterheads
Replaceable inserts and a reusable double-helix cutter body serve spindle moulders and four-sided planers. Select the actual body material and cutting class.
- Dimensions / insert-cut reference / body configuration
- 90x35xH60x6T 15/30 Light-Cutting steel body 90x35xH100x6T 15/37 Heavy-Cutting steel body ; 90x35xH80x6T 15/30 Light-Cutting steel body 90x35xH100x6T 14/30 Heavy-Cutting steel body ; 90x35xH100x6T 15/30 Light-Cutting steel body 90x35xH120x6T 15/37 Heavy-Cutting steel body ; 90x35xH120x6T 15/30 Light-Cutting steel body 90x35xH120x6T 14/30 Heavy-Cutting steel body ; 100x35xH60x6T 15/30 Light-Cutting steel body 90x35xH130x6T 15/37 Heavy-Cutting steel body ; 100x35xH80x6T 15/30 Light-Cutting steel body 90x35xH160x6T 15/37 Heavy-Cutting steel body ; 100x35xH100x6T 15/30 Light-Cutting steel body 100x35xH40x6T 15/37 Heavy-Cutting steel body ; 100x35xH120x6T 15/30 Light-Cutting steel body 100x35xH60x6T 15/37 Heavy-Cutting steel body ; 125x40xH60x6T 15/30 Light-Cutting steel body 100x35xH80x6T 15/37 Heavy-Cutting steel body ; 125x40xH80x6T 15/30 Light-Cutting steel body 100x35xH100x6T 15/37 Heavy-Cutting steel body ; 125x40xH100x6T 15/30 Light-Cutting steel body 100x35xH120x6T 15/37 Heavy-Cutting steel body ; 125x40xH120x6T 15/30 Light-Cutting steel body 100x35xH150x6T 15/37 Heavy-Cutting steel body ; 90x35xH40x6T 15/37 Heavy-Cutting steel body 100x40xH60x6T 15/37 Heavy-Cutting steel body ; 90x35xH60x6T 15/37 Heavy-Cutting steel body 100x40xH80x6T 15/37 Heavy-Cutting steel body ; 90x35xH60x6T 14/30 Heavy-Cutting steel body 100x40xH100x6T 15/37 Heavy-Cutting steel body ; 90x35xH80x6T 15/37 Heavy-Cutting steel body 100x40xH120x6T 15/37 Heavy-Cutting steel body ; 90x35xH80x6T 14/30 Heavy-Cutting steel body 100x40xH130x6T 15/37 Heavy-Cutting steel body
- Drawing units
- Confirm all dimensional symbols and cutter-body selection before order
REFERENCE 0307-989
Long spiral planer cutterheads
Alloy-steel/cast-steel body directions use reversible carbide inserts. Length, insert count and cutting angle can be matched to the approved planer.
- Head diameter / length / groove count / insert
- 80–200 mm /150–1600 mm /4T–12T /14×14×2 mm;80–200 mm /150–1600 mm /4T–12T /15×15×2.5 mm R150;50–100 mm /150–600 mm /3T–6T /15×15×2.5 mm R150
REFERENCE 0307-990
Reversible carbide woodworking knives and blanks
Tungsten-carbide square and rectangular forms support spiral heads, planers, edge-banders and profile tooling. Approve hole, edge radius and dimensional tolerance.
- Square dimensions
- 10×10×1.5;11×11×1.5;12×12×1.5;13.8×13.8×2.5;14×14×2;14.3×14.3×2.5;14.6×14.6×2.5;15×15×2.5;16×16×2;16.5×16.5×2.8;18×18×2.45 mm
- Rectangle dimensions
- 20×12×1.5;30×12×1.5;40×12×1.5;49.5×12×1.5;50×11×1.5;60×12×1.5 mm
REFERENCE 0307-991
Indexable profile router cutters
Replaceable cutting elements provide a cabinetry and wood-panel routing direction. Approve profile geometry and clamping details.
- Stated dimensions / shank
- 38.1×27×19×76.2 mm /12 mm;19×30×90 mm /8 mm; drawing governs all symbols
- First configuration angle
- 91°
REFERENCE 0307-992
PCD raised-panel cutters
Silver-brazed PCD cutting edges provide a cabinet centre-panel shaping direction.
- Diameter range
- 31.8–47 mm
- Stated height direction
- 9.3–14.7 mm; exact symbol and shank require drawing
REFERENCE 0307-993
Curved bi-metal reciprocating blades
A curved tooth line and bi-metal construction provide a pipe and angle-steel cutting direction.
- Overall length / TPI
- 200 mm /10–14;250 mm /10–14
- Holder
- Confirm the actual reciprocating-saw connection
REFERENCE 0307-994
Half-inch-shank reciprocating wood blades
Reciprocating blades cover plunge, demolition and wood-panel cutting directions.
- Overall length
- 152–300 mm
- TPI directions
- 3,5,6,10,12
- Shank
- 1/2 inch; actual connection drawing required
REFERENCE 0307-995
Carbide-tooth reciprocating blades for wood
Carbide teeth provide a separate wood and nail-embedded-board cutting direction.
- Overall length / TPI
- 152 mm /3,6,8;228 mm /3,6,8
REFERENCE 0307-996
Carbide-tooth reciprocating blades for metal
Carbide-tip blades provide pipe, strut, cast-iron and stainless cutting directions.
- Overall length / TPI
- 150 mm /8,10;225 mm /8,10;300 mm /8,10
REFERENCE 0307-997
Fully ground HSS brad-point wood drills
A ground centre point, shoulder cutters and a wide flute serve hardwood drilling.
- Diameter / overall-length ranges
- 3–13 mm /90–160 mm
REFERENCE 0307-998
Carbon-steel brad-point wood drills
A brad point and two shoulder spurs provide a wood, plywood and fibreboard drilling direction.
- Diameter / overall-length ranges
- 3–31 mm /60–250 mm
REFERENCE 0307-999
Two-guide-channel wood drills
Bearing-steel/carbon-steel directions use two guide channels for chip removal.
- Diameter range
- 3–20 mm
- Overall length
- Approve drawing; source length string is ambiguous
REFERENCE 0307-1000
Stubby hex-shank brad-point drills
Short brad-point bodies offer compact access for wood and uncoated panels.
- Diameter / overall length
- 2.38/60;3.17/60;4.76/60;6.35/60;7.94/60;9.53/60 mm
REFERENCE 0307-1001
Three-flute ground HSS wood drills
A three-flute ground HSS direction combines centre point and shoulder cutting geometry.
- Diameter / overall-length ranges
- 3–13 mm /90–160 mm
REFERENCE 0307-1002
Single-spiral beam auger drills
A spiral auger direction covers solid beams, plywood and chipboard. Hex and slotted-drive shanks require machine-mode confirmation.
- Diameter / overall-length ranges
- 6–30 mm /90–450 mm
- Shank directions
- Hex and SDS-plus
REFERENCE 0307-1003
Four-flute wood drills
Four flutes provide a separate deep wood-boring geometry.
- Diameter range / overall length
- 12–40 mm /165 mm
REFERENCE 0307-1004
Hand-powered eye auger drills
A hardened oxidised-steel body with a black finish uses an eye handle interface and a threaded pilot point.
- Diameter / overall length
- 25 mm /152–300 mm
REFERENCE 0307-1005
Extra-long formwork drill bits
Long-shank drill directions process boards, beams and selected layered construction materials; match the cutting point to the layer stack.
- Diameter / overall-length ranges
- 6–30 mm /400–1000 mm
- Shank directions
- Straight and SDS-plus
REFERENCE 0307-1006
Three-flute carbon-steel wood augers
A solid high-carbon-steel body uses a milled tri-flute system and hex holder interface.
- Diameter / overall-length ranges
- 6–35 mm /152–600 mm
- Shank
- 1/4-inch hex
REFERENCE 0307-1007
Three-flute spade wood drills
High-carbon-steel spade bodies combine a solid centre tip with hollow-centre flute relief.
- Diameter range / overall length
- 10–35 mm /165 mm
- Shank
- 1/4-inch hex
REFERENCE 0307-1008
Self-feeding three-flute spade drills
High-carbon-steel spade bodies combine a self-feeding pilot tip with hollow-centre flute relief.
- Diameter range / overall length
- 10–35 mm /165 mm
- Shank
- 1/4-inch hex
REFERENCE 0307-1009
Flat spade wood drills
Flat cutting geometry provides a separate wood-boring direction; select diameter and holder.
- Diameter range / overall length
- 6–40 mm /152 mm
REFERENCE 0307-1010
Three-flute carbide-tip Forstner bits
Micrograin-carbide tips and a hardened-steel body provide flat-bottom, overlapping and angled wood-hole directions.
- Diameter range
- 25–100 mm
- Shank
- Hex; actual dimensions on approved drawing
REFERENCE 0307-1011
Carbide-tip cylinder boring bits
Carbide-tip cylinder-boring geometry covers softwood, coated panels and compressed wood sheets.
- Diameter / overall-length ranges
- 3–30 mm /90–450 mm; exact pair to drawing
REFERENCE 0307-1012
Deep plug and tenon cutters
Alloy-steel cutters form straight plugs, dowels and tenons for furniture and joinery.
- Diameter / overall-length ranges
- 9.5–60 mm /140–160 mm
REFERENCE 0307-1013
Ground carbon-steel Forstner bits
Ground high-carbon-steel directions provide flat-bottom holes in solid wood and panels.
- Diameter / overall-length ranges
- 6–115 mm /60–160 mm
REFERENCE 0307-1014
Toothed-rim Forstner wood bits
Toothed rims and a centre point provide a separate Forstner cutting geometry; choose the exact rim and drawing.
- Diameter / overall-length ranges
- 6–115 mm /60–160 mm
REFERENCE 0307-1015
Rotary wood-carving and boring heads
A combined carving/boring head provides a separate rotary wood-shaping direction; machine/guard approval is required.
- Head diameter
- 0.8,1,1.2 inch
- Thread direction
- 5/8–11; exact interface drawing required
REFERENCE 0307-1016
Flat, tapered and bevelled wood-shaping wheels
Separate wheel profiles support wood shaping. Confirm construction, guard and permitted tool use before selection.
- Diameter / profiles
- 115 or125 mm /flat,tapered,bevelled
REFERENCE 0307-1017
Wood-handled turning and carving tools
Wood handles and bevelled cutting edges provide hand-guided wood-carving directions.
- Cutting-width / overall-length ranges
- 4.7–25.4 mm /160–255 mm
REFERENCE 0307-1018
Bi-metal hole saws with separate pilot arbors
Interchangeable hole-saw bodies and pilot arbors provide steel-sheet, wood and plastic drilling directions.
- Diameter range
- 22–200 mm
- Holder
- Tri-shank; approved arbor drawing required
REFERENCE 0307-1019
Carbide-tip multi-material hole saws
Carbide teeth on steel bodies provide separate standard and large-diameter drilling directions.
- Diameter directions / connection
- 22–150 mm /1/2–20 UNF or5/8–18 UNF;22–200 mm /1/2–20 UNF or5/8–18 UNF
REFERENCE 0307-1020
Thin bi-metal hex-drive hole saws
M42 HSS and a hardened backing plate provide an impact-driver-oriented thin hole-saw direction. Confirm the exact tool approval.
- Diameter / shank
- 18–44 mm /6.35 mm
REFERENCE 0307-1021
Single- and double-edge pull saws
Hand pull-cut saws provide separate tooth and blade-length directions for small woodworking tasks.
- Length options / TPI
- 150,180,240 mm /17;150,225,300 mm /10,12,18; final pairing to selected blade
REFERENCE 0307-1022
Depth-stop countersink and pilot-drill combinations
Adjustable pilot and countersink depth use an included wrench and plastic surface-contact collar. Bearing-stop and plain-stop directions are separate.
- Stated cutting size / shank
- 3.2×4.8 mm /6.35 mm hex; confirm pilot/countersink symbols
- Stop directions
- Plain low-friction collar; bearing-equipped collar
REFERENCE 0307-1023
Push-lock quick-change hole-saw arbors
A push-lock connection, push plug release and dust guard provide a quick-change hole-saw direction.
- Hole-saw diameter range / shank
- 32–165 mm /11 mm; approved connection drawing required
REFERENCE 0307-1024
Adjustable countersink drill assortments
Pilot drill, countersink and free-spinning collar geometry supports controlled-depth screw recesses in panels and wood.
- Pilot reference
- 3.2×4.8 mm; dimension meaning to approved drawing
- Countersink range
- 9.5–12.7 mm; final size pairing to selected set
REFERENCE 0307-1025
Ceramic and alumina automotive sanding discs
Ceramic/aluminium-oxide grain provides a bodywork and coating-repair sanding direction.
- Diameter
- 100,115,125,150 mm
- Grit
- P40–P2500
REFERENCE 0307-1026
White alumina sanding discs
Aluminium-oxide grain with an anti-clog coating provides a sanding direction for unfinished and painted surfaces.
- Diameter
- 100,115,125,150 mm
- Grit
- P60–P1200
REFERENCE 0307-1027
Green-film ceramic/alumina sanding discs
Film-backed ceramic/alumina directions cover metal, stone, wood and surface finishing.
- Diameter
- 100,115,125,150,180 mm
- Grit
- P40–P2000
REFERENCE 0307-1028
Soft TPU and sponge-backed sanding discs
TPU base material, alumina abrasive and a soft sponge/film structure provide a conformable curved-surface sanding direction.
- Diameter
- 100,115,125,150 mm
- Grit
- P180–P3000
REFERENCE 0307-1029
Alumina film sanding discs
Film-backed aluminium oxide with a super-size anti-clog treatment provides an automotive, wood and metal finishing direction.
- Diameter
- 125,150 mm
- Grit
- P40–P2000
REFERENCE 0307-1030
Ceramic/alumina sanding mesh
Open mesh and an anti-clog stearate treatment provide a dust-extraction-compatible sanding direction. Match the extraction system and actual backing.
- Diameter
- 125,150 mm
- Grit
- P40–P3000
- Abrasive
- Aluminium oxide with mixed ceramic direction
REFERENCE 0307-1031
Three-dimensional pyramid-structured sanding discs
Structured aluminium-oxide abrasive provides a surface-finishing direction for automotive and instrument work.
- Diameter
- 125,150 mm
- Grit
- P40–P2000
REFERENCE 0307-1032
Flexible sponge-backed sanding rolls
A latex-impregnated paper backing, sponge and anti-clog treatment provide flexible hand contour sanding. Confirm the actual roll dimensions.
- Grit
- P80–P800
- Use direction
- Wet/dry hand sanding, subject to selected construction
REFERENCE 0307-1033
Perforated sponge sanding rolls and tear-off pads
Aluminium-oxide abrasive on sponge-backed perforated rolls offers repeatable hand pad formats.
- Roll
- 115 mm×25 m
- Pad
- 115×125 mm
- Pack reference
- 200 pads per roll
- Grit
- P80–P2000
REFERENCE 0307-1034
Fine-repair dot sanding abrasives
A silicon-carbide/alumina pyramid-grain direction supports fine stages of coating refinishing.
- Abrasive
- Silicon carbide and aluminium oxide
- Grade directions
- A3,A5,A7,A9; agree actual grade system
REFERENCE 0307-1035
Diamond flap discs
Diamond-grain flap construction provides selected hard-material grinding directions.
- Diameter
- 115,125 mm
- Grit
- P80,P100,P120,P200,P400
- Material direction
- Titanium alloy, carbide, stainless, stone, ceramics or glass; validate actual disc selection
REFERENCE 0307-1036
Ceramic and zirconia-mixed flap discs
Ceramic/mixed-zirconia grain provides a metal and coating-removal direction.
- Diameter
- 100,115,125,150,180 mm
- Grit
- P40,P60,P80,P120
- Wheel forms
- Type27 and Type29 configurations
REFERENCE 0307-1037
Aluminium-oxide flap discs
Alumina grain flap discs provide metal-surface and weld-finishing directions.
- Diameter
- 100,115,125,150,180 mm
- Grit
- P40–P320
- Wheel forms
- Type27 and Type29
REFERENCE 0307-1038
Zirconia flap discs
Zirconia grain provides selected stainless and general metal-finishing directions.
- Diameter
- 100,115,125,150,180 mm
- Grit
- P40–P120
- Wheel forms
- Type27 and Type29
REFERENCE 0307-1039
Nylon quick-change conditioning discs
Non-woven nylon discs provide a conformable surface-conditioning direction for grinding marks, rust and coatings.
- Diameter
- 50,75 mm
- Attachment
- Quick-change disc; approve exact locking interface
REFERENCE 0307-1040
Zirconia quick-change abrasive discs
Zirconia grain offers a small-diameter metal-deburring and polishing direction.
- Diameter
- 50,75 mm
- Grit
- P40,P60,P80,P120
- Attachment
- Quick-change locking type to approved holder
REFERENCE 0307-1041
Nylon industrial scouring pads
Nylon-fibre non-woven construction provides flexible finishing on paint, metal and wood.
- Diameter directions
- 50,75,100,115,125,150 mm
- Grit
- P180–P3000
- Colours
- Red,green,grey,brown; colour-to-grade pairing requires approval
REFERENCE 0307-1042
Bell-shaped non-woven bevel wheels
An integral bell-shaped non-woven structure provides conformable coating and surface-conditioning work.
- Selected connection
- 90 mm diameter /M10×1.5
- Other diameter
- 100 mm; actual connection to drawing
- Grade directions
- #46,coarse,medium,fine,extra fine
REFERENCE 0307-1043
Alumina fibre-backed sanding discs
Aluminium-oxide abrasive on fibre backing offers rust, weld, paint and wood-surface preparation directions.
- Diameter
- 100,115,125,178 mm
- Abrasive
- Aluminium oxide
REFERENCE 0307-1044
Flat surface-conditioning wheels
Flat-wheel forms provide a separate deburring/finishing direction. Approve the abrasive composition and density for the actual item.
- Diameter
- 50,75,100,115,125 mm
- Selected grain specification
- Requires sample/drawing confirmation
REFERENCE 0307-1045
Soft foam interface cushions
Foam cushions sit between the abrasive and backing pad, with selected hardness and shape for surface conformity.
- Diameter
- 25,50,75,100,115,125,150 mm
- Material direction
- Sponge/foam; exact density and attachment to approve
REFERENCE 0307-1046
Rubber hook-and-loop backing pads
Rubber-body backers connect compatible sanding or polishing media to a tool.
- Diameter
- 50,75,100,115,125,150 mm
- Attachment
- Hook-and-loop face; tool-side interface to drawing
REFERENCE 0307-1047
Orbital-sander backing pads
Multi-hole, standard-hole and no-hole directions support different extraction layouts. Hole pattern and size can be customized.
- Diameter
- 150 mm
- Face attachment
- Hook-and-loop or adhesive direction; exact adhesive specification to confirm
- Hole layouts
- Multi-hole,normal holes,no holes
REFERENCE 0307-1048
Thin rubber-and-metal abrasive backers
Rubber and metal backing structures support adhesive-backed sanding discs.
- Diameter
- 100,115,125,150,180 mm
REFERENCE 0307-1049
Foam pads with threaded backing plates
Sponge polishing heads offer a soft fine-finishing direction on paint, wood and metal.
- Diameter / connection
- 150 mm /M14; alternate tool interface requires confirmation
REFERENCE 0307-1050
Open-cell hook-and-loop interface pads
Open-cell foam provides a cushion between the disc and backer, with hook-and-loop faces for changes.
- Diameter / thickness
- 25/13;50/13;75/13;100/13;115/13;125/13;150/13 or20 mm
REFERENCE 0307-1051
Textured hook-and-loop foam polishing pads
Embossed foam faces and selected hole patterns provide conformable paintwork finishing directions.
- Diameter
- 75,100,125,150,180,200 mm
- Hole layouts
- Multi-hole,normal-hole,no-hole
- Attachment
- Hook-and-loop or adhesive direction; exact face to approve
REFERENCE 0307-1052
Shank-mounted miniature flap wheels
Small flap wheels provide narrow-gap, internal, curved and flat finishing directions for parts, moulds and tubing.
- Head diameter
- 10,15,20,25,30,40 mm
- Grit
- P40–P400
- Shank
- Approve diameter, length and marked speed
REFERENCE 0307-1053
Hook-and-loop wool polishing wheels
Wool polishing media provide automotive, furniture and metal finishing directions.
- Diameter
- 125,150,180 mm
- Material
- Wool
REFERENCE 0307-1054
Dense wool polishing pads
A dense pure-wool direction supports selected automotive, marine, metal, plastics and fibreglass finishing.
- Diameter
- 25,50,75,100,125,150,180 mm
- Material direction
- Pure wool; composition verification with ordered sample
REFERENCE 0307-1055
Folded cloth polishing buffs
Corrugated/folded cloth structures provide pre-polishing and finishing access to flat or irregular surfaces.
- Diameter
- 150,180,200 mm
- Grade reference
- P80–P600; exact cloth/abrasive construction to approve
REFERENCE 0307-1056
Cloth waxing and final-finishing buffs
Cloth buffs pair with a selected compound for final metal finishing.
- Diameter
- 75,100,125,150,200 mm
- Grade directions
- Finish,super finish
REFERENCE 0307-1057
Double- and four-sided hand sanding blocks
Alumina abrasive blocks provide wet/dry hand sanding directions for furniture, paint and selected metal work.
- Block dimensions
- 100×70×25;125×75×25;120×100×12;140×115×5 mm
- Grit
- P36–P2500
REFERENCE 0307-1058
Alumina sanding belts
Aluminium-oxide belts offer shaping, stripping and finishing directions on wood, metal, plastics, composites and paint.
- Width
- 13,40,50,60,65,75,100,105,150 mm
- Overall-length range
- 457–1220 mm; exact width/length pairing to selected belt
- Grit
- P40–P400
REFERENCE 0307-1059
Solid oil-based metal-polishing compounds
Solid wax/compound blocks pair with felt or cloth buffs for intermediate finishing of stainless, aluminium and plated components.
- Grade directions
- A3,A5,A7,A9; approve abrasive grade and substrate pairing
- Block dimensions
- 75 × 25 × 25; 189 × 54 × 50; 115 × 33 × 32 mm
REFERENCE 0307-1060
Liquid and paste paint-polishing compounds
Liquid/paste abrasive compounds provide a paint-defect and light-scratch refinishing direction.
- Pack mass
- 500 g,1000 g
- Grade references
- P1000,P1200,P1500,P2000,P2500; approve selected formulation
REFERENCE 0307-1061
Flexible abrasive end brushes
Flexible brush elements reach grooves and holes for deburring and fine finishing; manual and automated fixture directions need separate drawings.
- Design brief
- Head and shank dimensions,filament material,abrasive grade,workpiece,holder and permitted speed
REFERENCE 0307-1062
Radial ceramic bristle discs
Moulded flexible bristles with ceramic abrasive provide corner, groove and complex-profile finishing. Stack thickness and directional configurations are selectable.
- Diameter directions
- 15 mm,20 mm,33 mm;1,1.5,2,3,4,6,8 inch
- Straight-filament directions
- 3,4,6,8 inch
- Selected grit directions
- P50,P80,P220,P320,P400,P600,P1000,P5000; remaining ambiguous grades to confirm
REFERENCE 0307-1063
Rubber and abrasive bristle discs
Rubber/emery construction provides elastic metal-cleaning and coating-removal directions.
- Diameter
- 25,50,76,115 mm
REFERENCE 0307-1064
Custom abrasive disc brushes
Disc brushes can be designed around engine blocks, hydraulic/pneumatic parts and other deburring workpieces.
- Diameter
- 35,45,55,60,80,100,120,145 mm
- Customization brief
- Filament,abrasive,trim length,fixing pattern,workpiece and machine interface
REFERENCE 0307-1065
Retail abrasive assortments
Abrasive sets can combine selected disc, pad and accessory directions with a pack layout. Approve the actual bill of materials rather than a generic piece count.
- Set directions
- 5,8,10,20,50 pieces
- Packaging direction
- Moulded-pulp and other shown pack layouts; actual pack to approve
REFERENCE 0307-1066
Oscillating-tool attachment and surface directions
Traditional closed/open and quick-change fixing geometries require an actual holder match. Milled, three-side-ground, side-set and wave-set tooth directions are separate options.
- Attachment
- Closed and open fixing patterns; exact tooth/slot geometry to drawing
- Surface choices
- Black paint,black coating,blued surface,gold paint,natural scraper finish,electrochemically polished stainless,electroplated diamond direction
- Tooth directions
- Side-set standard,three-side-ground precision,wave-set tooth forms
REFERENCE 0307-1067
Milled and ground carbon-steel oscillating plunge blades
High-carbon-steel blades offer standard, waisted and wide profiles for softwood, plastics and plasterboard. Stainless-shank directions use a separate backing construction.
- Milled tooth widths
- 10,20,32,34,45,65,68 mm
- Three-side-ground tooth widths
- 32,34,45,65,68 mm
- Stainless-shank combinations
- 42 or34 mm milled;34 or68 mm three-side-ground
- Round/segment direction
- 87 mm HCS
REFERENCE 0307-1068
Carbon-steel oscillating blades with paired cutting depths
Different blade widths and reaches serve controlled access and plunge cuts in wood and panels.
- Width / cutting depth
- 47/40;22.5/52.5;22.5/36.5;28/48;22/50.5;10/34 mm
- Serrated soft-material direction
- 68 mm width for carton,polystyrene,carpet,leather and rubber
REFERENCE 0307-1069
Carbon-steel oscillating scrapers and segment cutters
Scraper profiles remove selected adhesive, paint and silicone residue. Separate round/segment blades have different edge paths and fixing patterns.
- Scraper dimensions
- 28 mm /50 mm cutting depth;50 mm;52×26;52×45;28×50 mm; special curved shapes to drawing
- Square-opening blade
- 75×75 mm /35 mm cutting depth
- Carbon-steel segment diameters
- 87,87.8,91.3 mm
- HCS/HSS combination segment forms
- 65,87,100,103 mm diameter;103×80 mm relief form
- HCS/carbide direction
- 74 mm nominal size /8 mm cutting depth; exact shape drawing required
REFERENCE 0307-1070
High-speed-steel oscillating round cutters
HSS and M2-HSS directions provide round or segment cutting forms for selected insulation, wood, plastics and non-ferrous work.
- HSS diameters
- 64,80,80.5,100 mm
- M2 HSS diameters
- 80,87 mm
- Insulation round direction
- 100 mm; selected edge profile for soft materials
REFERENCE 0307-1071
Bi-metal oscillating blades with milled and ground teeth
Bi-metal constructions provide straight, wide, extended and waisted profiles. M2 and M42 are distinct cutting-material directions.
- M2 bi-metal
- 32 or45 mm three-side-ground;34 or68 mm milled
- Milled bi-metal widths
- 10,20,32,34,44,45,65,68 mm
- Extended milled widths
- 32,45 mm
- M42 segment diameter
- 87 mm
- M42 width / cutting depth
- 22.5/52.5;10/35;35/43;28/48;20/36.5;10/34;28/50;40.3/68 mm
- Other bi-metal width / cutting depth
- 28/48 mm
REFERENCE 0307-1072
Titanium-treated bi-metal oscillating blades
A titanium-treated tooth direction provides separate width and reach combinations. Confirm the actual treatment chemistry and cutting material for the ordered blade.
- Width / cutting depth
- 34/40;20/40;41/41;44/51;44.6/40;28/51 mm
REFERENCE 0307-1073
Stainless oscillating window and adhesive scrapers
Bent, serrated, long and flat stainless scraper forms provide access to window and adhesive joints.
- Flat width
- 52 mm
- Width / cutting depth
- 35/52;31/77 mm
- Other directions
- Bent,pointed,serrated and long-window profiles; dimensions to approved drawing
REFERENCE 0307-1074
Carbide-grit oscillating cutters and rasps
HCS-backed carbide-grit edges and faces provide selected tile, mortar and concrete-removal directions. Round, segment, delta, finger, oval and double-ended shapes serve different access.
- Round/segment nominal diameters
- 63,65,80,86 mm
- Delta nominal size
- 78 mm
- Finger nominal size
- 33 mm
- Oval nominal size
- 98 mm
- Double-ended nominal size
- 86 mm; flat and offset forms
REFERENCE 0307-1075
Diamond-grit oscillating cutting discs
Diamond-grit HCS-backed disc forms provide selected hard-tile and glass processing directions.
- Diameter directions
- 63,65,80 mm
- Shape options
- Flat and offset attachment forms; actual holder drawing required
- Other triangular hard-abrasive form
- 78 mm HCS/carbide; composition remains distinct from diamond discs
REFERENCE 0307-1076
Hook-and-loop oscillating sanding supports
Aluminium-alloy/rubber and HCS/rubber backers hold compatible abrasive sheets for corner and pointed access.
- Aluminium-alloy/rubber delta sizes
- 78,90 mm
- Other direction
- Pointed HCS/rubber backer; dimensions to drawing
- Face
- Hook-and-loop
REFERENCE 0307-1077
Multi-step chip-control cobalt-HSS drills
A chip-control point and relief-ground structure provide a separate drilling direction. Three-flat shanks are shown; specify actual diameter, length and chuck fit.
- Legacy diameter direction
- 3–25 mm metric;1/8–1 inch imperial; current availability and exact geometry to confirm
- Layout references
- DIN338 metric and ANSI B94.11M; DIN340/DIN1897 directions require confirmation
- Construction
- Cobalt-bearing HSS,chip-control point,three-flat shank
REFERENCE 0307-1078
Single-process ground cobalt-HSS twist drills
Flutes and body are ground in one CNC process. Blank and semi-finished directions are separate from finished drills.
- Legacy diameter direction
- 3–20 mm metric;1/8–3/4 inch imperial; current configuration to confirm
- Point direction
- 130° split-point icon
- Construction
- Cobalt-bearing HSS; fully ground,blank or semi-finished direction
REFERENCE 0307-1079
Mixed-size drill sets with rigid multi-material cases
ABS,PC and TPR case constructions offer organized metric and imperial drill assortments. Confirm the actual cutting-tool material and pack bill.
- Metric packs
- 25 pieces:1–13 mm in0.5 mm steps;19 pieces:1–10 mm in0.5 mm steps;13 pieces:1.5–6.5 mm,exact quantity pairing to confirm;5 pieces:3,4,5,6,8 mm
- Imperial packs
- 29 pieces:1/16–1/2 inch in1/64 steps;21 pieces:1/16–3/8 inch in1/64 steps;14 pieces:1/16–1/2 inch,exact assortment to approve
- Case materials
- ABS + PC + TPR directions
Each card describes a separate tool or configuration direction. Keep dimensions, material, grade, tooth form, flute count, coating and fixing paired within the selected row. A listed size range does not imply every combination is available. Geometric symbols, unlabelled dimensions and source unit differences need an approved drawing. Metric and inch interfaces are distinct. Cutter material, coating properties and workpiece application references are separate from guaranteed tool performance. Coolant route, thread limit, hole type and actual engagement depth require setup review. Operating speed, guard, cooling and machine compatibility come from the exact item documents and approved application. Earlier catalogue directions require current option and sample confirmation. Each semicolon separates a listed configuration; vertical bars separate columns, while slashes inside a cell denote the original fraction or optional value. Metric and imperial nominal directions are not exact conversion or interchangeability claims. Catalogue references do not establish stock or a current certification.
What matters for this category
A better brief.
A clearer comparison.
Focus the sourcing conversation on the features, materials and production details that make a difference to your product range.
Cover the complete machining and finishing chain
Coordinate drilling, threading, shaping, sawing, surface preparation and polishing in one purchasing brief while retaining the distinct requirements of each material and operation.
Compare actual construction differences
Review ground or formed HSS, cobalt/PM-HSS, solid or tipped carbide, diamond/CBN, tooth/grit structure and coating directions alongside geometry and holder requirements.
Build a repeatable assortment
Choose exact components, sizes, grades, finishes and interfaces, then approve the sample, pack layout and inspection points for repeat purchasing.
Branding, configuration & packaging
Make the product
fit your programme.
Bring artwork, reference samples and a target cost. The available process, minimum quantity, sample charges and development scope are reviewed for the chosen option.
Tool geometry and material selection
Discuss non-standard drawing-based cutters, diameter and length, handedness, edge profile, coolant holes, thread form, substrate and coating. Engineering feasibility and minimum order remain specific to the item.
Assortment and private-label planning
Discuss selected tool bills, retail cases, hanging cards/clips, sleeves, labels, marking and cartons. Approve the artwork, legal rights, pack materials and complete component quantities.
Samples and order quotation
Request the actual sample or trial arrangement, quantity, destination, inspection, packaging and shipping plan. Price, MOQ, tooling, sample charges, lead time and warranty require a current written quotation.
Quality & product evidence
Turn requirements
into checks.
Agree which product characteristics need testing and how the approved sample relates to the bulk order.
Check material and critical geometry
Agree verification of substrate/coating, hardness where relevant, diameter, length, run-out, edge, thread limit, shank and holder fit. Measurement and material-analysis records should identify the selected item and batch.
Approve application-specific trials
Use the actual work material, machine, cooling, speed/feed and acceptance targets for a sample trial. Threading, deep-hole drilling, blade cutting and polishing require their own conditions.
Inspect the tool and complete pack
Check edge/tip condition, brazing or segment attachment as applicable, protective finish, count, marking and pack protection. Agree inspection criteria and destination-specific evidence before shipment.
Test capability is a starting point for the inspection plan. Request the method, applicable model and results needed for your order.
Documents matched to the order
Ask for evidence
that fits the product.
Files are selected for the actual tool, application and destination. Supplier or component credentials do not automatically cover every item or the trading service.
State the sales market, intended users and required files in your first enquiry. Current validity and scope are checked for the selected supplier and product; a category description does not certify every item.
Share your document requirements ↗- Tool and application file
- Request an approved drawing/specification, material/coating direction, dimensions, holder details and operating/selection instructions for the exact tool.
- Inspection and destination evidence
- Request item/batch measurement and agreed test records. Any certificate, conformity claim or destination requirement must match the selected construction and its current evidence.
- Sample, pack and shipment file
- Approve the sample record, component bill, artwork, marking, pack/carton plan, invoice and packing list. Chemical polishing compounds need relevant composition, handling and transport files.
Built around how you sell
Different buyers.
Different specifications.
Your sales channel changes the assortment, packaging and quality priorities. Tell us the intended use as well as the product name.
Machine shops and production tooling
Use the workpiece, machine, drawing and operation to select drilling, milling, threading, turning, reaming and deburring tools; keep actual geometry and cutting conditions together.
Furniture, panels and construction
Match saws, boring/router tools, cutterheads, wood drills, diamond/masonry tools and chisels to panel structure, stone, tile, concrete, equipment and required finish.
Repair, finishing and tool retail
Plan paint/metal sanding, polishing, brushes, compounds, hand tools and component assortments around the finish stages, backing system and pack presentation.
From first brief to a defined order
One contact.
A practical next step.
Samples, commercial terms and responsibilities are agreed for the project. Use the same product and packing specification when comparing quotations.
Share the requirement
Product, reference image, quantity, sales market and timing.
Compare suitable options
Review configuration, materials, sample scope and relevant documents.
Approve the specification
Agree artwork, packaging, sample, testing and inspection criteria.
Confirm the order plan
Set price, payment, production, delivery and defect remedies in writing.
Buyer questions
Before you send
your first enquiry.
Practical answers about this sourcing direction, customization and the reference options. Your agreed specification and written quotation determine the actual order.
Are you the original tool manufacturer?
We provide trade sourcing and product/configuration coordination. Manufacturing, inspection, branding and warranty responsibilities are specified for the selected order.
Which metal-cutting tool families can be sourced?
Discuss HSS, cobalt/PM-HSS and carbide drills, annular cutters, end mills, reamers, taps, dies, thread mills, burrs, turning/milling/grooving/thread inserts, superhard tools and drawing-based directions.
Do you also cover wood, tile and construction tools?
Yes. The scope includes saws, router/profile/boring tools, cutterheads, wood drills, masonry/hammer drills, chisels, diamond blades/cores, grinding and edge-shaping tools.
How do I choose a drill, tap or milling cutter?
Send the work material and condition, hole/thread or profile drawing, holder, required reach, cooling, machine and target result. Match exact diameter, length, point/flute, tolerance and coating for the selected setup.
Can I combine abrasives, pads and polishing compounds?
Discuss the substrate, preparation stages, desired finish, grit/grade, disc or belt size, backing, hole pattern, pad hardness, tool connection and compound. Confirm compatibility with a sample trial.
Can you coordinate custom tools, marking and retail assortments?
Drawing-based geometry, selected materials/coatings, marking, pack layouts and component assortments can be discussed. Feasibility, legal artwork rights, minimum quantity and tooling charges require a current proposal.
Do listed dimensions mean all variants are ready to ship?
No. Dimensions identify configuration directions. Confirm the actual row combination, units, thread/holder standard, current availability and approved sample before ordering.
How are samples, MOQ, lead time and quality documents agreed?
Request an itemized quotation with quantity, sample/trial arrangement, inspection points, destination evidence, pack plan and timing. These conditions depend on the exact tool or assortment.
Who handles my enquiry?
Factory Sourcing Hub handles this enquiry as an independent sourcing and trading service. The product route, supplier suitability, sample scope and order responsibilities are agreed for the actual project.
How do I get a price and order minimum?
Send the product reference, quantities per variation, customization and packaging. Prices, minimums, sample charges and delivery dates are confirmed in a current quotation; the page is not a live inventory or price feed.
Can I discuss samples and inspection before ordering?
Yes. State whether you need a reference sample, a customized sample or development work. Agree the sample cost and shipping, approval specification, inspection plan and remedy for non-conforming goods before the bulk order.
What should I attach to my email?
Reference images, drawings, logo artwork and a product list are useful. Include quantities, the intended users and sales market, packaging, required documents and timing. After submitting the form, email attachments to kunhuow@gmail.com with your enquiry reference.
Tell us what you are planning
Your next order
starts with a brief.
A reference picture or a short description is enough to begin. Add the details you already know; the optional fields help make the follow-up more useful.
- Workpiece material/condition, operation, drawing and required hole/thread/profile or finish
- Tool dimensions and units, material/coating, holder, coolant, machine and operating conditions
- Quantities by configuration, sample/trial needs, assortment bill, marking and packaging artwork
- Destination, required files, inspection criteria, packing/shipping and target schedule
Download the enquiry checklist ↓
Independent sourcing and trading service. Supplier choice, service costs and order conditions are discussed for your project.
Discuss your requirements.
Product selection, customization, samples and quotation enquiries.
Explore other sourcing directions
More options for
your product list.
Compare separate product ranges and prepare a brief that fits your assortment.
Drilling, Cutting, Pneumatic & Installation Tool Sourcing
Source metal and masonry drills, taps, hole saws, wood and diamond blades, chisels, pneumatic nailers, driver tools and configured retail assortments.
Explore this service ↗
Drilling, Grinding & Bench Tools Sourcing
Organise enquiries for drills, drivers, grinding tools, bench equipment, cutting and oscillating tools, batteries, garden-tool projects and pneumatic procurement with configuration, inspection and export coordination.
Explore this service ↗
Cordless, Corded, Pneumatic, Garden & Hand Tool Sourcing
Compare drills, hammers, cutting and finishing tools, pneumatic equipment, garden machinery, hand tools and accessories with configuration-led sourcing support.
Explore this service ↗
Power Tools, Garden & Cleaning Equipment Sourcing
Source drilling, fastening, cutting, sanding, pneumatic and measuring tools, garden equipment, robotic lawn care, vacuums, floor-cleaning systems, batteries and accessories with configuration and export coordination.
Explore this service ↗Information basis: published product information reviewed . Reference details support a sourcing discussion. Current supply, samples and product-specific documents are confirmed for the selected item.