Diamond, Carbide, CBN & Abrasive Tool Sourcing

Porcelain-tile core drill — threaded body

A slotted abrasive core-drill body is listed for porcelain tile. Match the hole, interface and operating method to the selected tile and machine.

Grit reference

#50

Diameter

20–150 mm

Shank / connection

M14 or 5/8"-11

Segmented-rim core drill — threaded body

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#30

Diameter

20–85 mm

Shank / connection

M14 or 5/8"-11

Small core drill — hexagon shank

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#40

Diameter

5–25 mm

Shank / connection

Hexagon

Granite core drill — threaded body

A slotted abrasive core-drill body is listed for granite. Match the actual stone, drill diameter, interface and operating method for the quotation.

Grit reference

#30

Diameter

15–150 mm

Shank / connection

M14 or 5/8"-11

Small core drill — blue hexagon body

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#50

Diameter

5–35 mm

Shank / connection

Hexagon

Threaded core-drill case assortment

A fitted carry-case direction brings selected core-drill sizes together. Confirm the actual material, interface and approved component count.

Grit reference

#30

Drill sizes

20/35/38/43/50/60 mm

Connection

M14 or 5/8"-11

Hexagon core-drill and stainless guide assortment

A fitted plastic case groups small drill sizes with a stainless steel drill guide. Approve the complete bill and guide fit for the selected work.

Grit reference

#50

Drill sizes

6/8/10/12/25/30/35 mm

Included guide

Stainless steel drill guide

Shank

Hexagon

Small hexagon core-drill case assortment

A compact fitted case contains a separate small-size drill selection. Confirm the working material, guide and supplied item bill.

Grit reference

#40

Drill sizes

5/6/7/8/10/12/14 mm

Shank

Hexagon

Large abrasive hole-saw direction

Larger-diameter abrasive hole-saw bodies provide a separate drilling format. Confirm mandrel, material, machine and coolant arrangement for the actual diameter.

Grit reference

#30

Diameter

14–128 mm

Slotted core drill — round shank

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#50

Diameter

5–35 mm

Shank / connection

Round

Slotted core drill — hexagon shank

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#50

Diameter

5–35 mm

Shank / connection

Hexagon

Small hexagon core drill — alternate body

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#50

Diameter

5–35 mm

Shank / connection

Hexagon

Large slotted-mouth core drill — hexagon shank

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#50

Diameter

5–35 mm

Shank / connection

Hexagon

Abrasive core drill — internal threaded body

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#30

Diameter

16–150 mm

Shank / connection

M14 or 5/8"-11

Abrasive core drill — hexagon body

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#30

Diameter

16–150 mm

Shank / connection

Hexagon

Abrasive core drill — GAS connection

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#30

Diameter

16–150 mm

Shank / connection

1/2" GAS connection

Bench-drill core tool for thick granite

The reference pairs this core tool with a bench drill and wet drilling for granite around the stated thickness. Confirm the exact machine, cooling and operating limits; it is not a dry-drilling claim.

Diameter

16–120 mm

Reference stone thickness

Around 3 cm granite

Shank / connection

Hexagon or 1/2" GAS

Operating method

Wet drilling

Referenced speed

1000 RPM

Machine direction

Bench drill

Abrasive core drill — hexagon or round shank

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#60/80

Diameter

4–150 mm

Shank / connection

Hexagon or round

Fine-grit core drill — round shank options

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#100

Diameter

4–150 mm

Shank / connection

Ø6 mm / Ø8 mm / Ø10 mm

Abrasive core drill — threaded fine-body format

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#30

Diameter

16–150 mm

Shank / connection

M14 or 5/8"-11

Fine-grit core drill — imperial shank

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#100

Diameter

4–150 mm

Shank / connection

Ø3/8"

Abrasive core drill — hexagon or triangle shank

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#30

Diameter

16–150 mm

Shank / connection

Hexagon or triangle

Abrasive core drill — GAS threaded format

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#30

Diameter

16–150 mm

Shank / connection

1/2" GAS thread

Drill guide and water-bottle arrangement

A guide and hose-fed bottle form supports a separate coolant/positioning enquiry. Confirm the actual guide, seals, drill fit and supply method.

Designed drill range

5–85 mm

Reference bottle capacity

1 litre

Small-drill guide and water-bottle arrangement

A small-drill positioning assembly is pictured with a bottle and feed tube. Agree the actual hole, guide and coolant arrangement.

Designed drill sizes

4/5/6/7/8/10/12 mm

Reference bottle capacity

1 litre

Hole-saw mandrel

A mandrel is a separate mounting component for a selected hole saw. Send the required drill body, pilot, shank and fastening interface for confirmation.

Stainless steel drill guide

The stainless guide format supports positioning over the selected drilling area. Confirm adjustment, attachment method and drill-body clearance with the sample.

Material description

Stainless steel

Designed drill range

4–80 mm

Carbide hole-saw diameter range

Separate carbide hole-saw sizes can be configured with the selected mandrel and guide. Approve working material, cutter form and actual machine attachment.

Nominal diameter references

Ø33 / Ø43 / Ø53 / Ø63 / Ø67 / Ø73 / Ø83 / Ø103

Linear unit

Confirm with selected size drawing

Carbide hole-saw service case

A fitted case combines hole saws with a carbide file, centre adaptor and wrench. Agree exact quantities, locating plate and replacement components.

Hole-saw sizes

33/43/53/67/73/83 mm

Other contents

Carbide file; centre adaptor; wrench

Hole-saw locating-plate selections

Separate locating plates carry different size schedules. Match the chosen plate to the actual hole-saw set and approved fit.

Plate selection A

33/43/53/67/73/83 hole saws

Plate selection B

33/43/53/67/73/83/103 hole saws

Plate selection C

33/43/53/63/67/73/83 hole saws

Vacuum-brazed diamond chamfering bits

Conical abrasive bits provide a bevel/chamfer and rough-hole edge-finishing direction for glass, ceramic and porcelain tile. Confirm material, hole size, machine and operating limits.

Listed size bands

0–15 mm; 5–35 mm; 35–75 mm

Abrasive/process

Vacuum-brazed diamond

Drilling, grinding and chamfering assortment

A mixed set combines threaded core drills, a cutting/grinding wheel and conical chamfering bits. Approve the complete bill, safe mounting and intended material before sample order.

Listed count

7 pieces/set

Core drills

M14 vacuum-brazed diamond; 25/35/50 mm

Cutting/grinding wheel

Vacuum-brazed; 115 mm; #80/100

Conical chamfering bits

0–15 mm; 5–35 mm; 35–75 mm

Tile-drilling and grout-service assortment

A separate mixed set combines threaded and small hexagon drill sizes, a cutting/grinding wheel and a carbide grout saw. Confirm the actual interface and task of every component.

Listed count

7 pieces/set

Threaded drills

M14 vacuum-brazed diamond; 25/35/50 mm

Cutting/grinding wheel

Vacuum-brazed; 115 mm; #80/100

Hexagon drills

Vacuum-brazed diamond; 6/8 mm

Other component

Carbide grout saw

General abrasive core drill — threaded body

Compare the core-drill body, abrasive grade and stated interface with the material and required hole. Approve coolant, operating speed and machine fit for the selected size.

Grit reference

#30

Diameter

5–150 mm

Shank / connection

M14 or 5/8"-11

Dual quick-chuck vacuum-brazed drill format

A quick-chuck drill direction has a narrow abrasive tip and stepped rear interface. Request the actual dimensions, drive fit, working material and operating file; no dimensions are inferred from the appearance.

Conical drill-bit formats

Separate conical-bit directions are listed without numerical settings. Confirm the actual form, abrasive/cutter, shank, angle, diameter and intended work before quotation.

Colour-coded diamond handpads — compact size

A compact handpad range distinguishes abrasive grades by colour. Match the grade and contact surface to the intended finishing trial.

Size

90×55 mm

Green grade

#50

Black grade

#100

Red grade

#200

Yellow grade

#400

Wide abrasive-track slotted cutting blade

A segmented-slot blade has an additional wide abrasive-track construction reference. Select the actual cutting material, drive and operating limits with a matching sample.

Diamond-width reference

7 mm

Size schedule (mm)

105×1.2×2.2×22.23; 115×1.2×2.2×22.23; 125×1.2×2.2×22.23; 180×1.4×2.4×22.23; 230×1.6×2.6×22.23; 300×2.0×3.0×25.40; 350×2.0×3.0×25.40

Grit for all listed rows

#35/40

WA grit for all listed rows

#80

Slotted cutting blade — narrow abrasive track

A separate slotted cutting-blade format uses the listed narrow diamond-width reference. Approve the actual material, bore, mounting and speed rating for the selected row.

Diamond-width reference

3 mm

Size schedule (mm)

105×1.2×22.23; 115×1.2×22.23; 125×1.2×22.23; 180×1.4×22.23; 230×1.6×22.23; 300×2.0×25.40; 350×2.0×25.40

Grit for all rows

#35/40

Vacuum-brazed tile cutting blade

The reference specifies dry cutting of granite, marble and porcelain tile for this blade direction. Confirm the chosen work material, blade row, dust control, mounting and permissible operating speed.

Diamond-width reference

4.5 mm

Size schedule (mm)

105×1.0×22.23; 115×1.0×22.23; 125×1.0×22.23; 180×1.4×22.23

Grit for all rows

#40/50

Pipe cutting, deburring and chamfering disc

A disc with a side-working abrasive arrangement supports cutting and grinding metal/PVC pipe with edge preparation. Confirm the selected pipe and machine file; the picture does not establish unrestricted side-loading capability.

Diameter options

4.5", 5", 9", 12"

Continuous abrasive disc

Select the stated abrasive pattern and disc geometry for the intended material, cut and machine. Approve bore/flange fit, permissible speed, guarding and work method on the selected item.

Grit reference

#40

Diameter options

1"–20"

Bore / mounting

5/8", 7/8" or flange

Radial-strip abrasive disc

Select the stated abrasive pattern and disc geometry for the intended material, cut and machine. Approve bore/flange fit, permissible speed, guarding and work method on the selected item.

Grit reference

#40

Diameter options

4.5", 5", 6", 7"

Bore / mounting

7/8" or screw-thread connection

Four-strip continuous-rim abrasive disc

Select the stated abrasive pattern and disc geometry for the intended material, cut and machine. Approve bore/flange fit, permissible speed, guarding and work method on the selected item.

Grit reference

#40

Diameter options

2"–16"

Bore / mounting

5/8", 7/8" or flange

Curved-strip continuous-rim abrasive disc

Select the stated abrasive pattern and disc geometry for the intended material, cut and machine. Approve bore/flange fit, permissible speed, guarding and work method on the selected item.

Grit reference

#40

Diameter options

4", 4.5", 5", 6", 7", 9"

Bore / mounting

5/8", 7/8" or flange

Slotted continuous-rim abrasive disc

Select the stated abrasive pattern and disc geometry for the intended material, cut and machine. Approve bore/flange fit, permissible speed, guarding and work method on the selected item.

Grit reference

#40

Diameter options

1"–20"

Bore / mounting

5/8", 7/8" or flange

Coarse-slotted abrasive disc

Select the stated abrasive pattern and disc geometry for the intended material, cut and machine. Approve bore/flange fit, permissible speed, guarding and work method on the selected item.

Grit reference

#40

Diameter options

4", 4.5", 5", 7"

Bore / mounting

5/8", 7/8"

Triangular-pattern abrasive disc

Select the stated abrasive pattern and disc geometry for the intended material, cut and machine. Approve bore/flange fit, permissible speed, guarding and work method on the selected item.

Grit reference

#40

Diameter options

4", 4.5", 5", 6", 7", 9"

Bore / mounting

7/8" or flange

Diagonal-grid abrasive disc

Select the stated abrasive pattern and disc geometry for the intended material, cut and machine. Approve bore/flange fit, permissible speed, guarding and work method on the selected item.

Grit reference

#40

Diameter options

4.5", 5"

Bore / mounting

7/8" or flange

Patch-pattern abrasive disc

Select the stated abrasive pattern and disc geometry for the intended material, cut and machine. Approve bore/flange fit, permissible speed, guarding and work method on the selected item.

Grit reference

#40

Diameter options

4", 4.5", 5", 6", 7", 9"

Bore / mounting

5/8", 7/8" or flange

Radial-band abrasive disc

Select the stated abrasive pattern and disc geometry for the intended material, cut and machine. Approve bore/flange fit, permissible speed, guarding and work method on the selected item.

Grit reference

#40

Diameter options

4.5", 5"

Bore / mounting

7/8" or flange

Small-pattern abrasive disc

Compare the abrasive layout and disc geometry with the material and required cut. Confirm mounting/flange, permissible speed, guard and operating method on the selected item.

Grit reference

#40

Diameter

4.5", 5"

Bore / mounting

7/8" or flange

Dot-pattern abrasive disc with fitted centre

Compare the abrasive layout and disc geometry with the material and required cut. Confirm mounting/flange, permissible speed, guard and operating method on the selected item.

Grit reference

#40

Diameter

4.5", 5", 6", 7", 9"

Bore / mounting

7/8" or flange

Slotted disc with radial abrasive strips

Compare the abrasive layout and disc geometry with the material and required cut. Confirm mounting/flange, permissible speed, guard and operating method on the selected item.

Grit reference

#40

Diameter

4"–16"

Bore / mounting

7/8" or flange

Slotted disc with curved abrasive patches

Compare the abrasive layout and disc geometry with the material and required cut. Confirm mounting/flange, permissible speed, guard and operating method on the selected item.

Grit reference

#40

Diameter

4.5", 5", 6", 7", 9"

Bore / mounting

7/8" or flange

Slotted abrasive disc with centre flange

Compare the abrasive layout and disc geometry with the material and required cut. Confirm mounting/flange, permissible speed, guard and operating method on the selected item.

Grit reference

#40

Diameter

4.5", 5", 7", 9"

Bore / mounting

7/8" or flange

Slotted abrasive disc with curved strips

Compare the abrasive layout and disc geometry with the material and required cut. Confirm mounting/flange, permissible speed, guard and operating method on the selected item.

Grit reference

#40

Diameter

4", 4.5", 5", 6", 7", 9"

Bore / mounting

7/8" or flange

Slotted disc with mixed strip-and-dot pattern

Compare the abrasive layout and disc geometry with the material and required cut. Confirm mounting/flange, permissible speed, guard and operating method on the selected item.

Grit reference

#40

Diameter

4.5", 5", 7", 9"

Bore / mounting

7/8" or flange

Slotted abrasive disc with fitted centre and edge patches

Compare the abrasive layout and disc geometry with the material and required cut. Confirm mounting/flange, permissible speed, guard and operating method on the selected item.

Grit reference

#40

Diameter

4.5", 5", 7", 9"

Bore / mounting

7/8" or flange

Slotted disc with rounded abrasive strips

Compare the abrasive layout and disc geometry with the material and required cut. Confirm mounting/flange, permissible speed, guard and operating method on the selected item.

Grit reference

#40

Diameter

4.5", 5", 7", 9"

Bore / mounting

7/8" or flange

Slotted disc with broad abrasive band

Compare the abrasive layout and disc geometry with the material and required cut. Confirm mounting/flange, permissible speed, guard and operating method on the selected item.

Grit reference

#40

Diameter

5", 7", 9"

Bore / mounting

7/8" or flange

Perforated abrasive cutting disc

A perforated disc with an abrasive working band provides a separate geometry for the selected cutting task. Confirm material, mounting and operating limits for the actual size.

Grit references

#40, #50

Diameter options

105/115/125 mm

Bore options

20/22.23 mm

Miniature perforated abrasive disc

A small perforated disc is listed with bore, thin core and coating width. Approve the matching mandrel and machine limits for the chosen operation.

Disc diameter

22 mm

Core thickness

0.3 mm

Hole size

1.7/2 mm

Coating width

7.5 mm

Miniature abrasive discs — size schedule

A separate miniature disc family links diameter with bore and working-band width. Each row is a complete geometry reference; select the actual mandrel and speed limit.

Geometry order

Diameter × core thickness × hole size × coating width; mm

Configuration comparison

8 listed configurations · compare configurations

Option reference | Listed configuration

Option reference	Listed configuration
Option 1	16 × 0.3 × 1.7/2 × 3
Option 2	19 × 0.3 × 1.7/2 × 4.5
Option 3	20 × 0.3 × 1.7/2 × 5
Option 4	22 × 0.3 × 1.7/2 × 6
Option 5	25 × 0.3 × 1.7/2 × 7.5
Option 6	30 × 0.3 × 2/3 × 7.5
Option 7	35 × 0.3 × 2/3 × 10
Option 8	40 × 0.3 × 2/3 × 10

Shank-mounted continuous-edge discs

Mounted discs have a continuous abrasive edge with diameter-dependent core thickness. Select the complete tool, shank and permissible operating conditions.

Geometry order

Diameter × core thickness; mm

Geometry options

20×0.8; 25×1.0; 30×1.0; 35×1.0; 40×1.3; 45×1.5; 50×1.5; 75×1.5; 100×1.6

Shank diameter for all rows

6 or 6.35 mm

Coating width for all rows

3 mm

Shank-mounted slotted-edge discs

A separate mounted disc family uses a slotted abrasive edge. Approve the selected shank, tool retention, material and machine speed.

Geometry order

Diameter × core thickness; mm

Geometry options

20×0.8; 25×1.0; 30×1.0; 35×1.0; 40×1.0; 45×1.0; 50×1.0; 75×1.0; 100×1.0

Shank diameter for all rows

6 or 6.35 mm

Coating width for all rows

3 mm

Fine-pattern abrasive disc

Distinct abrasive surface patterns offer separate contact directions for the selected application. Match thickness, working band, bore/adaptor and actual grit with the approved sample.

Diameter

100 mm

Bore

20 mm

Adaptor designation

20–15 mm

Blank thickness options

0.6 mm, 0.8 mm, 1 mm

Coating width options

16 mm, 18 mm, 20 mm, 25 mm

Visible sample face/reverse grit markings

#1000 / #400

Uniform abrasive-band disc

Distinct abrasive surface patterns offer separate contact directions for the selected application. Match thickness, working band, bore/adaptor and actual grit with the approved sample.

Diameter

100 mm

Bore

20 mm

Adaptor designation

20–15 mm

Blank thickness options

0.6 mm, 0.8 mm, 1 mm

Coating width options

16 mm, 18 mm, 20 mm, 25 mm

Broad abrasive-face disc

Distinct abrasive surface patterns offer separate contact directions for the selected application. Match thickness, working band, bore/adaptor and actual grit with the approved sample.

Diameter

100 mm

Bore

20 mm

Adaptor designation

20–15 mm

Blank thickness options

0.6 mm, 0.8 mm, 1 mm

Coating width options

16 mm, 18 mm, 20 mm, 25 mm

Curved-strip abrasive disc

Distinct abrasive surface patterns offer separate contact directions for the selected application. Match thickness, working band, bore/adaptor and actual grit with the approved sample.

Diameter

100 mm

Bore

20 mm

Adaptor designation

20–15 mm

Blank thickness options

0.6 mm, 0.8 mm, 1 mm

Coating width options

16 mm, 18 mm, 20 mm, 25 mm

Diagonal segmented-band abrasive disc

Distinct abrasive surface patterns offer separate contact directions for the selected application. Match thickness, working band, bore/adaptor and actual grit with the approved sample.

Diameter

100 mm

Bore

20 mm

Adaptor designation

20–15 mm

Blank thickness options

0.6 mm, 0.8 mm, 1 mm

Coating width options

16 mm, 18 mm, 20 mm, 25 mm

Triangular-perforated abrasive-band disc

Distinct abrasive surface patterns offer separate contact directions for the selected application. Match thickness, working band, bore/adaptor and actual grit with the approved sample.

Diameter

100 mm

Bore

20 mm

Adaptor designation

20–15 mm

Blank thickness options

0.6 mm, 0.8 mm, 1 mm

Coating width options

16 mm, 18 mm, 20 mm, 25 mm

Profiled abrasive disc — raised-centre form

A raised-centre disc with curved abrasive bands provides a distinct profile. Confirm working geometry, grit, adaptor and machine mounting on the selected item.

Diameter

100 mm

Bore

20 mm

Adaptor designation

20–15 mm

Profiled abrasive disc — flat form

A flat disc with a curved segmented abrasive pattern provides a separate surface direction. Confirm grit, working-face geometry and machine mounting on the actual product.

Diameter

100 mm

Bore

20 mm

Adaptor designation

20–15 mm

Diamond reciprocating-blade formats

Abrasive-edged reciprocating blade forms support a separate cutting enquiry. Confirm work material, blade length, thickness, mounting and permissible stroke/speed for the selected machine.

Grit references

#40, #50

Listed size reference

8", 12"

Wood and composite-panel cutting blade

A segmented wood-cutting direction is listed for composite panel and wood containing nails. Confirm the actual panel/nail content, machine, mounting and trial; no universal material suitability is implied.

Diameter options

4", 4.5", 5", 9"

Very-coarse carbide-grit cutting-disc direction

A separate coarse-grit disc family has large working-edge elements. Confirm the exact work material, bore, machine speed and guarding for the chosen size.

Grit reference

#6

Diameter range

4"–16"

Segmented-rim cutting-disc formats

A separate cutting-disc photo direction shows rim segmentation and different centre interfaces. Request actual abrasive/process, diameter, thickness, bore, material and operating limits; image proportions do not establish a dimension.

Vacuum-brazed diamond blade for porcelain and ceramic

A fine-grit diamond blade direction is specified for porcelain tile and ceramic. Approve material, mounting, operating method and speed on the actual selected size.

Process / abrasive

Vacuum-brazed diamond

Grit

#60/80

Size schedule

115×22.23 mm; 125×22.23 mm; 230×22.23 mm

Vacuum-brazed diamond blade for metal cutting

A separate diamond-blade direction is listed for steel/sheet steel, stainless steel, rebar, cast iron, aluminium and other non-ferrous work. Confirm the exact workpiece, machine and cutting trial.

Process / abrasive

Vacuum-brazed diamond

Grit options

#25, #40

Listed size

14"

Vacuum-brazed carbide-grit mixed-material blade

The coarse carbide direction is listed for roots, wood/plastic pallets, plywood, fencing, chipboard, sleepers, embedded nails/screws, rubber and thin sheet metal. Approve the actual material mixture, mounting, guard and operating limits for the order.

Process / abrasive

Vacuum-brazed carbide

Grit

#6

Size schedule

230×22.23 mm; 350×20 mm; 350×25.4 mm

Vacuum-brazed diamond blade for granite and marble

A separate stone-cutting blade direction targets granite and marble. Confirm stone, selected size, mounting, operating method and cutting trial.

Process / abrasive

Vacuum-brazed diamond

Grit

#40

Size schedule

115×22.23 mm; 125×22.23 mm; 230×22.23 mm

Electroplated diamond circular saw-band enquiry

A circular saw-band direction supports a dimension-specific cutting brief. Send the loop geometry, interface, working material and machine conditions for an engineering and sample proposal.

Process / abrasive

Electroplated diamond

Dimension option

Customized dimensions to discuss

Layered vacuum-brazed diamond grinding wheel

The selected wheel describes a layered stainless-steel and rubber construction with a grinding direction for metal or porcelain tile. Confirm the exact laminate, mounting and permissible working method with the sample.

Process / abrasive

Vacuum-brazed diamond

Construction description

Two stainless steel layers with rubber material side

Grit options

#30, #50

Size

125×22.23 mm

Flat-face abrasive grinding disc

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#30, #50

Diameter options

4", 5"

Connection / bore

M14 or 5/8"-11

Segmented dished grinding disc with ventilated centre

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#40

Diameter options

4", 4.5", 5"

Connection / bore

M14 or 5/8"-11

Patterned coarse dished grinding disc

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#20

Diameter options

5", 6", 7"

Connection / bore

7/8"

Uniform coarse dished grinding disc

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#20

Diameter options

5", 6", 7"

Connection / bore

7/8"

Dished grinding disc — multi-grit range

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#30, #50, #100

Diameter options

4", 4.5", 5"

Connection / bore

7/8"

Mixed-pattern dished grinding disc

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#20, #30

Diameter options

5", 6", 7"

Connection / bore

7/8"

Small segmented abrasive-pad format

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#30, #50, #100

Diameter options

3", 4"

Small patterned abrasive-pad format

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#30, #50, #100

Diameter options

3"

Slotted abrasive cup-disc format

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#30

Diameter options

3", 4", 4.5", 5"

Connection / bore

M14 or 5/8"-11

Alternate slotted abrasive cup-disc format

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#30

Diameter options

3", 4", 4.5", 5"

Connection / bore

M14 or 5/8"-11

Fine abrasive edge-wheel format

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#100

Diameter options

6", 8", 10"

Connection / bore

5/8"

Coarser abrasive edge-wheel format

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#50

Diameter options

6", 8", 10"

Connection / bore

5/8"

Abrasive profile wheel — continuous-edge form

Select the required stone edge profile and wheel geometry with the work drawing and machine. Separate illustrated directions include radius, bevel and ogee; the selected profile and operating conditions require approval.

Grit options

#30, #50, #100

Diameter options

8", 10", 12", 14"

Illustrated profile directions

3/8" radius; 1/2" radius; 45° bevel; ogee; other illustrated profiles to discuss

Abrasive profile wheel — slotted-edge form

Select the required stone edge profile and wheel geometry with the work drawing and machine. Separate illustrated directions include radius, bevel and ogee; the selected profile and operating conditions require approval.

Grit options

#30, #50, #100

Diameter options

8", 10", 12", 14"

Illustrated profile directions

3/8" radius; 1/2" radius; 45° bevel; ogee; other illustrated profiles to discuss

Large grinding discs with separate face patterns

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#20, #30, #50, #100

Diameter options

180 mm

Profile-shaping wheels — radius direction A

A selected profiling wheel uses its own abrasive-face and guide arrangement. Approve the actual edge drawing, radius/shape, working depth, abrasive process and machine mounting rather than assuming all profile wheels share a geometry.

Grit options

#30, #50, #100

Listed size options

3", 4"

Profile-shaping wheels — radius direction B

A selected profiling wheel uses its own abrasive-face and guide arrangement. Approve the actual edge drawing, radius/shape, working depth, abrasive process and machine mounting rather than assuming all profile wheels share a geometry.

Grit options

#30, #50, #100

Listed size options

3", 4"

Ogee profile-shaping wheels

A selected profiling wheel uses its own abrasive-face and guide arrangement. Approve the actual edge drawing, radius/shape, working depth, abrasive process and machine mounting rather than assuming all profile wheels share a geometry.

Grit options

#30, #50, #100

Listed size options

3", 4"

Full-bullnose profile-shaping wheels

A selected profiling wheel uses its own abrasive-face and guide arrangement. Approve the actual edge drawing, radius/shape, working depth, abrasive process and machine mounting rather than assuming all profile wheels share a geometry.

Grit options

#30, #50, #100

Listed size options

3", 4"

Ventilated dished wheel with curved strips

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#40

Diameter options

100/115/125 mm

Connection / bore

22.23 mm bore; M14 or 5/8"-11 connection

Uniform-face dished grinding wheel

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#40

Diameter options

100/115/125 mm

Connection / bore

22.23 mm bore; M14 or 5/8"-11 connection

Ventilated dished wheel with spiral bands

Distinct working-face and centre profiles provide different grinding or carving contact directions. Match the abrasive, tool geometry, work material, mounting and permissible operating speed to the selected sample.

Grit references

#40

Diameter options

100/115/125 mm

Connection / bore

22.23 mm bore; M14 or 5/8"-11 connection

Perforated cylindrical grinding drums

Cylindrical abrasive drums have side openings and a threaded connection. Match diameter, working surface and actual machine/part clearance.

Grit options

#30, #50, #100

Height

2"

Diameter options

2", 3"

Connection

M14 or 5/8"-11

Grooved cylindrical grinding drums

A separately grooved drum body supplies a different contact pattern. Confirm the working face, abrasive and machine interface with the actual material.

Grit

#30

Height

2"

Diameter options

2", 3"

Connection

M14 or 5/8"-11

Threaded spiral grinding/finger-tool direction

Small spiral working heads provide a distinct internal-edge or profile-working enquiry. Confirm the selected part, actual contact length and operating conditions.

Grit

#30

Diameter options

16/18/20/25 mm

Connection

M14 or 1/2" GAS

Alternate threaded spiral working-head format

A separate abrasive finger-tool layout combines a spiral surface with the stated connection. Match the actual work material, tool drawing and machine limits.

Grit

#30

Diameter options

16/18/20/25 mm

Connection

M14 or 1/2" GAS

Small conical point — sixty-degree profile

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=Ø10; α=60°; L=60; d=Ø6

Linear dimension units

Confirm on selected drawing

Small conical point — ninety-degree profile

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=Ø10; α=90°; L=60; d=Ø6

Linear dimension units

Confirm on selected drawing

Cylindrical point — wide body

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=12; H=20; L=90; d=Ø12

Linear dimension units

Confirm on selected drawing

Tapered point — short body

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=6; H=12; L=60; d=Ø6

Linear dimension units

Confirm on selected drawing

Wide conical point — broad angle

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=Ø25; α=120°; L=60; d=Ø8

Linear dimension units

Confirm on selected drawing

Wide conical point — right angle

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=Ø25; α=90°; L=60; d=Ø8

Linear dimension units

Confirm on selected drawing

Wide conical point — steep angle

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=Ø25; α=60°; L=60; d=Ø8

Linear dimension units

Confirm on selected drawing

Small cylindrical point

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=4; H=10; L=60; d=Ø6

Linear dimension units

Confirm on selected drawing

Round-ended point — short body

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=6; H=12; L=60; d=Ø6

Linear dimension units

Confirm on selected drawing

Small flat-ended point

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=4; H=7; L=60; d=Ø6

Linear dimension units

Confirm on selected drawing

Tapered mounted point — medium body

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=8; H=20; L=70; d=Ø8

Linear dimension units

Confirm on selected drawing

Conical mounted point — medium body

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=8; H=20; L=70; d=Ø8

Linear dimension units

Confirm on selected drawing

Long tapered mounted point

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=8; H=30; L=90; d=Ø8

Linear dimension units

Confirm on selected drawing

Needle-form mounted point

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=6; H=15; L=90; d=Ø6

Linear dimension units

Confirm on selected drawing

Slotted short mounted point

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=6; H=12; L=60; d=Ø6

Linear dimension units

Confirm on selected drawing

Round-ended wide mounted point

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=12; H=20; L=90; d=Ø12

Linear dimension units

Confirm on selected drawing

Short flat-ended mounted point

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=8; H=12; L=60; d=Ø8

Linear dimension units

Confirm on selected drawing

Slim tapered mounted point

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=6; H=20; L=60; d=Ø6

Linear dimension units

Confirm on selected drawing

Slim round-ended mounted point

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=6; H=20; L=60; d=Ø6

Linear dimension units

Confirm on selected drawing

Tapered mounted point — alternate shank

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=8; H=20; L=90; d=Ø9

Linear dimension units

Confirm on selected drawing

Flat-ended mounted point — extended shank

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=8; H=20; L=90; d=Ø8

Linear dimension units

Confirm on selected drawing

Slotted mounted point — extended shank

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=8; H=20; L=90; d=Ø8

Linear dimension units

Confirm on selected drawing

Long narrow mounted point

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=6; H=30; L=80; d=Ø6

Linear dimension units

Confirm on selected drawing

Extended cylindrical mounted tool

A separate mounted abrasive profile retains its stated drawing geometry. Agree linear units, abrasive, work material, holder and operating speed with the actual drawing and sample.

Drawing symbols and values

D=12; H=80; L=150; d=Ø12

Linear dimension units

Confirm on selected drawing

Extended imperial mounted-tool direction

An extended mounted abrasive tool uses an imperial length/shank reference. Confirm the head diameter and complete drawing before selecting the holder and working application.

Working-length symbol H

2-3/4"

Overall-length symbol L

4-5/8"

Shank-diameter symbol d

Ø1/4"

Mounted abrasive shape range

Cylindrical, ball, cone and related mounted shapes provide different contact profiles. Approve the selected abrasive, holder, work material and operating speed with the tool drawing.

Grit

#40

Shank options

6 mm; 1/4"; 1/2"

Shape directions

Cylindrical; ball; cone; other illustrated profiles

Mounted-head drawing configurations

A separate drawing selection retains head and shank geometry for a dimensional enquiry. Linear units and the exact abrasive/process are confirmed with the chosen drawing.

Drawing option A

Head Ø15, H10; shaft length50, Ø6.35

Drawing option B

Disc Ø24, thickness2.0; shaft length50, Ø6.35

Drawing option C

Round nose Ø12, R6.0, head length50; shaft length50, Ø12.0

Drawing option D

Tapered head Ø20/Ø15, H15; shaft length50, Ø12.0

Drawing option E

Round nose Ø8, R4.0, head length50; shaft length50, Ø12.0

Drawing option F

Cone Ø14, H25; shaft length50, Ø6.35

Drawing option G

Ball Ø20; shaft length50, Ø6.35

Drawing option H

Cylinder Ø15, H40; shaft length50, Ø6.35

Linear units

Confirm against selected drawing

Cup-ended mounted abrasive heads

A separate cup-ended working head uses its own head and shank reference. Confirm the head profile, abrasive, operating limit and mounting for the actual task.

Grit

#40

Shank diameter

3/8"

Head diameter

5/8"

Hexagon-mounted abrasive point assortment

A small set combines different working-head forms on a common listed hexagon shank. Approve the complete shape bill and machine fit.

Listed count

6 pieces/set

Grit

#100

Shank

6.35 mm hexagon

Total length

60 mm

Fifty-piece mounted abrasive assortment

A fitted organiser groups mixed mounted grinding shapes. Confirm actual head contents, abrasive grade, machine fit and packing before quotation.

Listed count

50 pieces/set

Shank diameter

3.17 mm

Grit options

#100, #150, #200

Total length

45 mm

Ten-piece mounted abrasive assortment

A smaller organiser provides a separate mixed-shape selection. Confirm the actual head list, shank option and abrasive grade.

Listed count

10 pieces/set

Grit options

#100, #150, #200

Shank diameter options

2.35/3/3.17 mm

Total length

45 mm

Mounted-head geometry organiser

A numbered organiser links cylindrical, ball, tapered and pointed heads to a geometry schedule. Select the actual form and clarify drawing units before approving the component bill.

Drawing geometry order

Head D / working H; linear unit to confirm

Drawing geometry choices

3.0/6; 4.0/6; 5.0/7; 6.0/7; 7.0/7; 6.0/6; 6.0/12; 6.0/10; 6.0/8; 6.0/8

Overall drawing length symbol

45; unit to confirm

Fine-surface mounted-head box

A fitted wooden-box direction combines balls, cups, discs, cylinders, round-ended, conical and tapered abrasive heads. Select each profile and confirm dimensions, abrasive and shank against the chosen drawing.

Head D references in illustrated profile order

8.0; 10; 10; 10; 6.0; 8.0; 10; 6.0; 8.0; 10; 8.0; 10; 8.0; 10; 6.0; 8.0; 10; 10; 6.0; 10

Linear unit

Confirm against selected drawing

Coarse-surface mounted-head box

A fitted wooden-box direction combines balls, cups, discs, cylinders, round-ended, conical and tapered abrasive heads. Select each profile and confirm dimensions, abrasive and shank against the chosen drawing.

Head D references in illustrated profile order

8.0; 10; 10; 10; 6.0; 8.0; 10; 6.0; 8.0; 10; 8.0; 10; 8.0; 10; 6.0; 8.0; 10; 10; 6.0; 10

Linear unit

Confirm against selected drawing

Twenty-piece finishing-point case

A separate case selection groups mounted abrasive forms for detailed working. Approve the exact head list, selected shank, abrasive grade and intended material before sampling.

Listed count

20 pieces/set

Grit options

#100, #150, #200

Shank diameter options

2.35/3/3.17 mm

Total length

45 mm

Fifteen-piece mixed-point case

A separate case selection groups mounted abrasive forms for detailed working. Approve the exact head list, selected shank, abrasive grade and intended material before sampling.

Listed count

15 pieces/set

Grit options

#100, #150, #200

Shank diameter options

2.35/3/3.17 mm

Total length

45 mm

Thirty-piece finishing-point case

A separate case selection groups mounted abrasive forms for detailed working. Approve the exact head list, selected shank, abrasive grade and intended material before sampling.

Listed count

30 pieces/set

Grit options

#100, #150, #200

Shank diameter options

2.35/3/3.17 mm

Total length

45 mm

Twenty-five-piece mixed-point case

A separate case selection groups mounted abrasive forms for detailed working. Approve the exact head list, selected shank, abrasive grade and intended material before sampling.

Listed count

25 pieces/set

Grit options

#100, #150, #200

Shank diameter options

2.35/3/3.17 mm

Total length

45 mm

Thirty-piece alternate mixed-point case

A separate case selection groups mounted abrasive forms for detailed working. Approve the exact head list, selected shank, abrasive grade and intended material before sampling.

Listed count

30 pieces/set

Grit options

#100, #150, #200

Shank diameter options

2.35/3/3.17 mm

Total length

45 mm

Small-head abrasive hole-processing tools

Small abrasive heads are listed for hole work in jade, glass and other hard brittle materials. Confirm the precise operation, coolant, holder and working limits on the actual item.

Grit

#120/140

Shank diameter

3.175 mm

Head diameter options

1.6 mm and 2.1 mm

Total length

46 mm

Straight profiling head

A separate illustrated profile supports shaping natural or artificial quartz material. Match the required edge drawing, actual workpiece, shank and operating conditions; dimensions and profile radii require item confirmation.

Grit options

#40, #50

Concave-edge profiling head

A separate illustrated profile supports shaping natural or artificial quartz material. Match the required edge drawing, actual workpiece, shank and operating conditions; dimensions and profile radii require item confirmation.

Grit options

#40, #50

V-groove profiling head

A separate illustrated profile supports shaping natural or artificial quartz material. Match the required edge drawing, actual workpiece, shank and operating conditions; dimensions and profile radii require item confirmation.

Grit options

#40, #50

Bevel profiling head

A separate illustrated profile supports shaping natural or artificial quartz material. Match the required edge drawing, actual workpiece, shank and operating conditions; dimensions and profile radii require item confirmation.

Grit options

#40, #50

Quarter-round profiling head

A separate illustrated profile supports shaping natural or artificial quartz material. Match the required edge drawing, actual workpiece, shank and operating conditions; dimensions and profile radii require item confirmation.

Grit options

#40, #50

Ogee profiling head

A separate illustrated profile supports shaping natural or artificial quartz material. Match the required edge drawing, actual workpiece, shank and operating conditions; dimensions and profile radii require item confirmation.

Grit options

#40, #50

Compound-round profiling head

A separate illustrated profile supports shaping natural or artificial quartz material. Match the required edge drawing, actual workpiece, shank and operating conditions; dimensions and profile radii require item confirmation.

Grit options

#40, #50

Rebated round-edge profiling head

A separate illustrated profile supports shaping natural or artificial quartz material. Match the required edge drawing, actual workpiece, shank and operating conditions; dimensions and profile radii require item confirmation.

Grit options

#40, #50

Tungsten carbide pointed reamers — complete geometry rows

Long pointed carbide reamer forms use separate head, cutting-length, shank and overall-length combinations. Confirm cut pattern, material, holder and operating conditions for each row.

Geometry order

Head diameter × length of cut × shank diameter × total length; mm

Configuration comparison

6 listed configurations · compare configurations

Option reference | Listed configuration

Option reference	Listed configuration
Option 1	3 × 25 × 3 × 51
Option 2	6 × 35 × 6 × 65
Option 3	8 × 50 × 8 × 100
Option 4	3 × 31.5 × 3.17 × 61.5
Option 5	4.7 × 50.8 × 4.75 × 77
Option 6	7.9 × 51.7 × 7.9 × 102.5

Carbide-gritted cylindrical ball-nose tools

A carbide-gritted working head uses a threaded connection and separate coarse/medium/fine choices. Match the actual grade, diameter, drive and work material.

Form

Cylindrical ball nose

Connection

M14

Grade directions

Coarse; medium; fine

Diameter options

Ø8/Ø10/Ø12 mm

Carbide-grain selection schedule

A separate grain schedule provides particle-diameter references for grade discussions. Specify the intended tool and work material; the schedule does not establish that every grade fits every working head.

Grit 4

4.0–5.0 mm grain

Grit 6

3.0–3.8 mm grain

Grit 8

2.5–3.0 mm grain

Grit 10

2.0–2.3 mm grain

Grit 14

1.6–2.0 mm grain

Grit 16

1.2–1.6 mm grain

Grit 20

1.0–1.2 mm grain

Grit 36

0.4–0.6 mm grain

Grit 60

0.3–0.4 mm grain

Small slotted carbide-grit disc

A small mounted-disc direction combines slots and an abrasive edge. Confirm the selected mandrel, shank, material and permissible speed.

Grit

#60

Diameter options

1", 1-1/4"

Long narrow carbide-grit working tool

A distinct carbide-grit working profile retains the stated size and shank. Confirm the actual material, contact geometry, machine and operating speed for the selected grade.

Grit options

#18, #23, #36

Size

8×170 mm

Shank diameter

8 mm

Short narrow carbide-grit working tool

A distinct carbide-grit working profile retains the stated size and shank. Confirm the actual material, contact geometry, machine and operating speed for the selected grade.

Grit options

#18, #23, #36

Size

6×65 mm

Shank diameter

6 mm

Extended narrow carbide-grit working tool

A distinct carbide-grit working profile retains the stated size and shank. Confirm the actual material, contact geometry, machine and operating speed for the selected grade.

Grit options

#18, #23, #36

Size

6×102 mm

Shank diameter

6 mm

Ball-ended carbide-grit working tool

A distinct carbide-grit working profile retains the stated size and shank. Confirm the actual material, contact geometry, machine and operating speed for the selected grade.

Grit options

#18, #23, #36

Size

20×55 mm

Shank diameter

6 mm

Disc-form carbide-grit working tool

A distinct carbide-grit working profile retains the stated size and shank. Confirm the actual material, contact geometry, machine and operating speed for the selected grade.

Grit options

#18, #23, #36

Size

50×3 mm

Shank diameter

6 mm

Threaded conical carbide-grit heads

A separate conical working-head family uses a threaded interface. Match profile, grade, work material and operating limit to the actual tool.

Grit options

#18, #23, #36

Size options

20×50 mm; 25×102 mm

Connection

3/8"-24

Compact carbide-grit cup wheel

A separate working profile retains its own size and mounting. Select grit, contact shape, work material and machine fit; confirm permissible speed for the actual item.

Grit options

#18, #23, #36

Size

65×13 mm

Hole diameter

Ø9.525 mm

Larger carbide-grit cup wheel

A separate working profile retains its own size and mounting. Select grit, contact shape, work material and machine fit; confirm permissible speed for the actual item.

Grit options

#18, #23, #36

Diameter options

100/125/150/180 mm

Hole diameter

Ø22.23 mm

Deep carbide-grit cup wheels

A separate working profile retains its own size and mounting. Select grit, contact shape, work material and machine fit; confirm permissible speed for the actual item.

Grit options

#18, #23, #36

Size combinations

76×32×9.525 mm; 102×38×14 mm

Thread-mounted carbide-grit cup

A separate working profile retains its own size and mounting. Select grit, contact shape, work material and machine fit; confirm permissible speed for the actual item.

Grit options

#18, #23, #36

Size

50×25 mm

Connection

3/8"-24

Segmented carbide-grit working wheel

A separate working profile retains its own size and mounting. Select grit, contact shape, work material and machine fit; confirm permissible speed for the actual item.

Grit options

#18, #23, #36

Diameter

50 mm

Thickness options

3.5/5/6/7/10/13/19 mm

Connection

3/8"-24

Alternate segmented carbide-grit wheel

A separate working profile retains its own size and mounting. Select grit, contact shape, work material and machine fit; confirm permissible speed for the actual item.

Grit options

#18, #23, #36

Diameter options

2"; 3"

Connection

3/8"-24

Perforated shallow carbide-grit cup

A separate working profile retains its own size and mounting. Select grit, contact shape, work material and machine fit; confirm permissible speed for the actual item.

Grit options

#18, #23, #36

Size

50×10 mm

Hole diameter

Ø9.525 mm

Fine-grit compact abrasive cup

A compact cup uses a separate finer grade and mounting-diameter reference. Confirm mounting type and operating conditions.

Grit

#50

Size

50×22 mm

Listed mounting diameter

Ø9.525 mm

Large flat abrasive floor disc

A large abrasive disc provides a separate floor-working profile. Confirm drive arrangement, actual floor material, grade and machine requirements.

Grit options

#16, #20, #40

Diameter options

8", 16", 17", 18", 20"

Centre-slotted abrasive floor disc

A large abrasive disc provides a separate floor-working profile. Confirm drive arrangement, actual floor material, grade and machine requirements.

Grit options

#16, #20, #40

Diameter options

16", 17", 18", 20"

Coarse centre-slotted floor disc

A large abrasive disc provides a separate floor-working profile. Confirm drive arrangement, actual floor material, grade and machine requirements.

Grit options

#6

Diameter options

16", 17", 18", 20"

Handled abrasive rubbing boards

A handled abrasive board provides a rectangular rubbing surface. Confirm contact material, grade, handle construction and application before selecting the size.

Grit options

#10, #16, #36

Size options

120×220 mm; 130×210 mm

Long double-handle abrasive board

A long rubbing-board direction uses two handles. Confirm substrate, grade, flatness and intended working operation.

Grit options

#10, #16, #36

Size

125×500 mm

Two-grade flat abrasive hand file

Different abrasive grades on opposite faces support staged manual working. Confirm handle and exact surface construction.

Shape

Flat

Size

8"

Face grades

One side #20; other side #36

Half-round abrasive hand file

A half-round working surface provides a separate manual contact profile. Confirm working length, handle and intended material.

Shape

Half round

Size

8"

Grit

#36

Coarse dished carbide-grit wheel

A distinct wheel profile and abrasive layout provides a separate selection for surface working. Confirm the actual profile drawing, work material and speed limit.

Grit selection

#4, #6, #8

Diameter options

115/125/150/180 mm

Hole diameter

22.23 mm

Two-grade carbide-grit wheel

A distinct wheel profile and abrasive layout provides a separate selection for surface working. Confirm the actual profile drawing, work material and speed limit.

Grit selection

One full side #6; other side #14

Diameter options

115/125/150/180 mm

Hole diameter

22.23 mm

Shallow dished carbide-grit wheel

A distinct wheel profile and abrasive layout provides a separate selection for surface working. Confirm the actual profile drawing, work material and speed limit.

Grit selection

#14

Diameter options

115/125 mm

Hole diameter

22.23 mm

Perforated dished carbide-grit wheel

A distinct wheel profile and abrasive layout provides a separate selection for surface working. Confirm the actual profile drawing, work material and speed limit.

Grit selection

#4, #6, #8

Diameter options

115/125 mm

Hole diameter

22.23 mm

Deep dished carbide-grit wheel

A distinct wheel profile and abrasive layout provides a separate selection for surface working. Confirm the actual profile drawing, work material and speed limit.

Grit selection

#10, #16, #36

Diameter options

100/115/125/180 mm

Hole diameter

22.23 mm

Alternate deep dished carbide-grit wheel

A distinct wheel profile and abrasive layout provides a separate selection for surface working. Confirm the actual profile drawing, work material and speed limit.

Grit selection

#10, #16, #36

Diameter options

100/115/125/180 mm

Hole diameter

22.23 mm

Beam-cutter floor-planer drum assembly

A drum assembly combines beam cutters and spacing washers. Heat-treated steel beam-cutter directions are listed for removing paint, coatings, laitance and surface deposits; confirm machine fit and actual floor conditions.

Assembly contents

64 beam cutters; 84 washers

Milling-cutter floor-planer drum assembly

A separate drum assembly uses milling cutters and washers. Carbide-tipped milling-cutter directions address thermoplastic markings and bituminous or rubber deposits; confirm machine compatibility.

Assembly contents

24 milling cutters; 44 washers

Five-point beam cutter

A separate floor-working cutter retains its tooth count and mounting geometry. Select the beam, star, carbide-tipped or milling construction to match the actual task and machine; confirm any paired thickness and bore options.

Diameter

44 mm

Point count

5

Thickness options

6 mm

Hole diameter options

16 mm

Six-point scarifying cutter

A separate floor-working cutter retains its tooth count and mounting geometry. Select the beam, star, carbide-tipped or milling construction to match the actual task and machine; confirm any paired thickness and bore options.

Diameter

46 mm

Point count

6

Thickness options

6 mm

Hole diameter options

15 mm

Larger six-point scarifying cutter

A separate floor-working cutter retains its tooth count and mounting geometry. Select the beam, star, carbide-tipped or milling construction to match the actual task and machine; confirm any paired thickness and bore options.

Diameter

57 mm

Point count

6

Thickness options

6 mm

Hole diameter options

22/25 mm

Eight-point large scarifying cutter

A separate floor-working cutter retains its tooth count and mounting geometry. Select the beam, star, carbide-tipped or milling construction to match the actual task and machine; confirm any paired thickness and bore options.

Diameter

82 mm

Point count

8

Thickness options

8 mm

Hole diameter options

30 mm

Twelve-point scarifying cutter

A separate floor-working cutter retains its tooth count and mounting geometry. Select the beam, star, carbide-tipped or milling construction to match the actual task and machine; confirm any paired thickness and bore options.

Diameter

80 mm

Point count

12

Thickness options

8 mm

Hole diameter options

30 mm

Eight-point compact scarifying cutter

A separate floor-working cutter retains its tooth count and mounting geometry. Select the beam, star, carbide-tipped or milling construction to match the actual task and machine; confirm any paired thickness and bore options.

Diameter

60 mm

Point count

8

Thickness options

6 mm

Hole diameter options

16 mm

Thick six-point scarifying cutter

A separate floor-working cutter retains its tooth count and mounting geometry. Select the beam, star, carbide-tipped or milling construction to match the actual task and machine; confirm any paired thickness and bore options.

Diameter

80 mm

Point count

6

Thickness options

20/40 mm

Hole diameter options

26/30 mm

Five-point milling cutter

A separate floor-working cutter retains its tooth count and mounting geometry. Select the beam, star, carbide-tipped or milling construction to match the actual task and machine; confirm any paired thickness and bore options.

Diameter

40 mm

Point count

5

Thickness options

11/22 mm

Hole diameter options

15 mm

Dot-pattern diamond polishing discs

A separate abrasive surface pattern provides a graded polishing sequence. Select diameter, bore and grade together, and confirm wet/dry operation, backing attachment and workpiece compatibility.

Illustrated shape variants

Two illustrated layouts

Diameter options

4", 4.5", 5"

Hole diameter options

16/20/22.23 mm

Grade/color references

Green #50; black #100; red #200; yellow #400; white #600; blue #800

Referenced set/case count

250

Referenced gross weight

10 kg

Referenced carton dimensions

36×26×16 cm

Fine-pattern diamond polishing discs

A separate abrasive surface pattern provides a graded polishing sequence. Select diameter, bore and grade together, and confirm wet/dry operation, backing attachment and workpiece compatibility.

Illustrated shape variants

Two illustrated layouts

Diameter options

4", 4.5", 5"

Hole diameter options

16/20/22.23 mm

Grade/color references

Green #50; black #100; red #200; yellow #400; white #600; blue #800

Referenced set/case count

250

Referenced gross weight

10 kg

Referenced carton dimensions

36×26×16 cm

Segment-pattern diamond polishing discs

A separate abrasive surface pattern provides a graded polishing sequence. Select diameter, bore and grade together, and confirm wet/dry operation, backing attachment and workpiece compatibility.

Illustrated shape variants

Three illustrated layouts

Diameter options

4", 4.5", 5"

Hole diameter options

16/20/22.23 mm

Grade/color references

Green #100; black #200; red #400; yellow #800; white #1500; blue #3000

Referenced set/case count

250

Referenced gross weight

10 kg

Referenced carton dimensions

36×26×16 cm

Dot-pattern diamond hand pads

A rectangular hand-pad direction uses its own surface pattern and grade sequence. Confirm backing, edge profile, work material and actual packing configuration.

Illustrated shape variants

Two illustrated layouts

Pad size

90×55 mm

Grade/color references

Green #50; black #100; red #200; yellow #400; white #600; blue #800

Referenced set/case count

200

Referenced gross weight

10 kg

Referenced carton dimensions

42×35×38 cm

Fine-pattern diamond hand pads

A rectangular hand-pad direction uses its own surface pattern and grade sequence. Confirm backing, edge profile, work material and actual packing configuration.

Illustrated shape variants

Two illustrated layouts

Pad size

90×55 mm

Grade/color references

Green #50; black #100; red #200; yellow #400; white #600; blue #800

Referenced set/case count

200

Referenced gross weight

10 kg

Referenced carton dimensions

42×35×38 cm

Fleck-pattern diamond hand pads

A rectangular hand-pad direction uses its own surface pattern and grade sequence. Confirm backing, edge profile, work material and actual packing configuration.

Illustrated shape variants

Illustrated flat hand-pad form

Pad size

90×55 mm

Grade/color references

Green #100; black #200; red #400; yellow #800; white #1500; blue #3000

Referenced set/case count

200

Referenced gross weight

10 kg

Referenced carton dimensions

42×35×38 cm

Cylindrical carbide burrs

Select the contact profile, cutting pattern and complete dimensional row together. Metric and inch configurations are separate references; confirm actual material, shank fit and operating speed before supply.

Geometry order

Head diameter × length of cut × shank diameter × total length

Cut-pattern directions

Standard cut; double cut; non-ferrous cut — selected per actual shape and material

Configuration comparison

14 listed configurations · compare configurations

Metric configuration reference | Listed configuration

Metric configuration reference	Listed configuration
Metric configuration 1	3 × 12 × 6/6.35 × 57 mm
Metric configuration 2	3 × 16 × 6/6.35 × 61 mm
Metric configuration 3	4 × 16 × 6/6.35 × 61 mm
Metric configuration 4	5 × 16 × 6/6.35 × 61 mm
Metric configuration 5	6 × 16 × 6/6.35 × 61 mm
Metric configuration 6	6 × 25 × 6/6.35 × 70 mm
Metric configuration 7	8 × 20 × 6/6.35 × 65 mm
Metric configuration 8	10 × 20 × 6/6.35 × 65 mm
Metric configuration 9	11 × 25 × 6/6.35 × 70 mm
Metric configuration 10	12 × 25 × 6/6.35 × 70 mm
Metric configuration 11	16 × 25 × 6/6.35 × 70 mm
Metric configuration 12	19 × 25 × 6/6.35 × 70 mm
Metric configuration 13	22 × 25 × 6/6.35 × 70 mm
Metric configuration 14	25 × 25 × 6/6.35 × 70 mm

Configuration comparison

14 listed configurations · compare configurations

Inch configuration reference | Listed configuration

Inch configuration reference	Listed configuration
Inch configuration 1	1/8" × 1/2" × 1/4" × 2-1/4"
Inch configuration 2	1/8" × 5/8" × 1/4" × 2-3/8"
Inch configuration 3	5/32" × 5/8" × 1/4" × 2-3/8"
Inch configuration 4	3/16" × 5/8" × 1/4" × 2-3/8"
Inch configuration 5	1/4" × 5/8" × 1/4" × 2-3/8"
Inch configuration 6	1/4" × 1" × 1/4" × 2-3/4"
Inch configuration 7	5/16" × 3/4" × 1/4" × 2-9/16"
Inch configuration 8	3/8" × 3/4" × 1/4" × 2-9/16"
Inch configuration 9	7/16" × 1" × 1/4" × 2-3/8"
Inch configuration 10	1/2" × 1" × 1/4" × 2-3/8"
Inch configuration 11	5/8" × 1" × 1/4" × 2-3/8"
Inch configuration 12	3/4" × 1" × 1/4" × 2-3/8"
Inch configuration 13	7/8" × 1" × 1/4" × 2-3/8"
Inch configuration 14	1" × 1" × 1/4" × 2-3/8"

End-cut cylindrical carbide burrs

Select the contact profile, cutting pattern and complete dimensional row together. Metric and inch configurations are separate references; confirm actual material, shank fit and operating speed before supply.

Geometry order

Head diameter × length of cut × shank diameter × total length

Cut-pattern directions

Standard cut; double cut; non-ferrous cut — selected per actual shape and material

Configuration comparison

14 listed configurations · compare configurations

Metric configuration reference | Listed configuration

Metric configuration reference	Listed configuration
Metric configuration 1	3 × 12 × 6/6.35 × 57 mm
Metric configuration 2	3 × 16 × 6/6.35 × 61 mm
Metric configuration 3	4 × 16 × 6/6.35 × 61 mm
Metric configuration 4	5 × 16 × 6/6.35 × 61 mm
Metric configuration 5	6 × 16 × 6/6.35 × 61 mm
Metric configuration 6	6 × 25 × 6/6.35 × 70 mm
Metric configuration 7	8 × 20 × 6/6.35 × 65 mm
Metric configuration 8	10 × 20 × 6/6.35 × 65 mm
Metric configuration 9	11 × 25 × 6/6.35 × 70 mm
Metric configuration 10	12 × 25 × 6/6.35 × 70 mm
Metric configuration 11	16 × 25 × 6/6.35 × 70 mm
Metric configuration 12	19 × 25 × 6/6.35 × 70 mm
Metric configuration 13	22 × 25 × 6/6.35 × 70 mm
Metric configuration 14	25 × 25 × 6/6.35 × 70 mm

Configuration comparison

14 listed configurations · compare configurations

Inch configuration reference | Listed configuration

Inch configuration reference	Listed configuration
Inch configuration 1	1/8" × 1/2" × 1/4" × 2-1/4"
Inch configuration 2	1/8" × 5/8" × 1/4" × 2-3/8"
Inch configuration 3	5/32" × 5/8" × 1/4" × 2-3/8"
Inch configuration 4	3/16" × 5/8" × 1/4" × 2-3/8"
Inch configuration 5	1/4" × 5/8" × 1/4" × 2-3/8"
Inch configuration 6	1/4" × 1" × 1/4" × 2-3/4"
Inch configuration 7	5/16" × 3/4" × 1/4" × 2-9/16"
Inch configuration 8	3/8" × 3/4" × 1/4" × 2-9/16"
Inch configuration 9	7/16" × 1" × 1/4" × 2-3/8"
Inch configuration 10	1/2" × 1" × 1/4" × 2-3/8"
Inch configuration 11	5/8" × 1" × 1/4" × 2-3/8"
Inch configuration 12	3/4" × 1" × 1/4" × 2-3/8"
Inch configuration 13	7/8" × 1" × 1/4" × 2-3/8"
Inch configuration 14	1" × 1" × 1/4" × 2-3/8"

Ball-nose cylindrical carbide burrs

Select the contact profile, cutting pattern and complete dimensional row together. Metric and inch configurations are separate references; confirm actual material, shank fit and operating speed before supply.

Geometry order

Head diameter × length of cut × shank diameter × total length

Cut-pattern directions

Standard cut; double cut; non-ferrous cut — selected per actual shape and material

Configuration comparison

14 listed configurations · compare configurations

Metric configuration reference | Listed configuration

Metric configuration reference	Listed configuration
Metric configuration 1	3 × 12 × 6/6.35 × 57 mm
Metric configuration 2	3 × 16 × 6/6.35 × 61 mm
Metric configuration 3	4 × 16 × 6/6.35 × 61 mm
Metric configuration 4	5 × 16 × 6/6.35 × 61 mm
Metric configuration 5	6 × 16 × 6/6.35 × 61 mm
Metric configuration 6	6 × 25 × 6/6.35 × 70 mm
Metric configuration 7	8 × 20 × 6/6.35 × 65 mm
Metric configuration 8	10 × 20 × 6/6.35 × 65 mm
Metric configuration 9	11 × 25 × 6/6.35 × 70 mm
Metric configuration 10	12 × 25 × 6/6.35 × 70 mm
Metric configuration 11	16 × 25 × 6/6.35 × 70 mm
Metric configuration 12	19 × 25 × 6/6.35 × 70 mm
Metric configuration 13	22 × 25 × 6/6.35 × 70 mm
Metric configuration 14	25 × 25 × 6/6.35 × 70 mm

Configuration comparison

14 listed configurations · compare configurations

Inch configuration reference | Listed configuration

Inch configuration reference	Listed configuration
Inch configuration 1	1/8" × 1/2" × 1/4" × 2-1/4"
Inch configuration 2	1/8" × 5/8" × 1/4" × 2-3/8"
Inch configuration 3	5/32" × 5/8" × 1/4" × 2-3/8"
Inch configuration 4	3/16" × 5/8" × 1/4" × 2-3/8"
Inch configuration 5	1/4" × 5/8" × 1/4" × 2-3/8"
Inch configuration 6	1/4" × 1" × 1/4" × 2-3/4"
Inch configuration 7	5/16" × 3/4" × 1/4" × 2-9/16"
Inch configuration 8	3/8" × 3/4" × 1/4" × 2-9/16"
Inch configuration 9	7/16" × 1" × 1/4" × 2-3/8"
Inch configuration 10	1/2" × 1" × 1/4" × 2-3/8"
Inch configuration 11	5/8" × 1" × 1/4" × 2-3/8"
Inch configuration 12	3/4" × 1" × 1/4" × 2-3/8"
Inch configuration 13	7/8" × 1" × 1/4" × 2-3/8"
Inch configuration 14	1" × 1" × 1/4" × 2-3/8"

Ball-shaped carbide burrs

A round head provides a distinct contact profile. Select cut pattern, head diameter and mounting together; confirm the actual operating conditions.

Geometry order

Head diameter × shank diameter × overall length

Metric configurations

3×6/6.35×47; 5×6/6.35×49; 6×6/6.35×50; 8×6/6.35×52; 10×6/6.35×54; 12×6/6.35×55; 16×6/6.35×60; 19×6/6.35×62; 25×6/6.35×67 mm

Inch configurations

1/8×1/4×1-7/8; 3/16×1/4×1-15/16; 1/4×1/4×2; 5/16×1/4×2; 3/8×1/4×2-1/8; 1/2×1/4×2-1/8; 5/8×1/4×2-3/8; 3/4×1/4×2-1/2; 1×1/4×2-3/4 inches

Oval carbide burrs

Select the contact profile, cutting pattern and complete dimensional row together. Metric and inch configurations are separate references; confirm actual material, shank fit and operating speed before supply.

Geometry order

Head diameter × length of cut × shank diameter × total length

Cut-pattern directions

Standard cut; double cut; non-ferrous cut — selected per actual shape and material

Configuration comparison

7 listed configurations · compare configurations

Metric configuration reference | Listed configuration

Metric configuration reference	Listed configuration
Metric configuration 1	3 × 6 × 6/6.35 × 51 mm
Metric configuration 2	6 × 10 × 6/6.35 × 55 mm
Metric configuration 3	8 × 13 × 6/6.35 × 58 mm
Metric configuration 4	10 × 16 × 6/6.35 × 61 mm
Metric configuration 5	12 × 20 × 6/6.35 × 65 mm
Metric configuration 6	16 × 25 × 6/6.35 × 70 mm
Metric configuration 7	19 × 25 × 6/6.35 × 70 mm

Configuration comparison

5 listed configurations · compare configurations

Inch configuration reference | Listed configuration

Inch configuration reference	Listed configuration
Inch configuration 1	1/4" × 3/8" × 1/4" × 2-1/8"
Inch configuration 2	3/8" × 5/8" × 1/4" × 2-3/8"
Inch configuration 3	1/2" × 7/8" × 1/4" × 2-5/8"
Inch configuration 4	5/8" × 1" × 1/4" × 2-3/4"
Inch configuration 5	3/4" × 1" × 1/4" × 2-3/4"

Round-tree carbide burrs

Select the contact profile, cutting pattern and complete dimensional row together. Metric and inch configurations are separate references; confirm actual material, shank fit and operating speed before supply.

Geometry order

Head diameter × length of cut × shank diameter × total length

Cut-pattern directions

Standard cut; double cut; non-ferrous cut — selected per actual shape and material

Configuration comparison

7 listed configurations · compare configurations

Metric configuration reference | Listed configuration

Metric configuration reference	Listed configuration
Metric configuration 1	3 × 13 × 6/6.35 × 58 mm
Metric configuration 2	6 × 18 × 6/6.35 × 63 mm
Metric configuration 3	8 × 20 × 6/6.35 × 65 mm
Metric configuration 4	10 × 20 × 6/6.35 × 65 mm
Metric configuration 5	12 × 25 × 6/6.35 × 70 mm
Metric configuration 6	16 × 25 × 6/6.35 × 70 mm
Metric configuration 7	19 × 25 × 6/6.35 × 70 mm

Configuration comparison

6 listed configurations · compare configurations

Inch configuration reference | Listed configuration

Inch configuration reference	Listed configuration
Inch configuration 1	1/8" × 1/2" × 1/4" × 2-1/4"
Inch configuration 2	Head 1/4";shank 1/4";overall 2-1/2";cutting length to confirm
Inch configuration 3	3/8" × 3/4" × 1/4" × 2-9/16"
Inch configuration 4	1/2" × 1" × 1/4" × 2-3/4"
Inch configuration 5	5/8" × 1" × 1/4" × 2-3/4"
Inch configuration 6	3/4" × 1" × 1/4" × 2-3/4"

Pointed-tree carbide burrs

Select the contact profile, cutting pattern and complete dimensional row together. Metric and inch configurations are separate references; confirm actual material, shank fit and operating speed before supply.

Geometry order

Head diameter × length of cut × shank diameter × total length

Cut-pattern directions

Standard cut; double cut; non-ferrous cut — selected per actual shape and material

Configuration comparison

7 listed configurations · compare configurations

Metric configuration reference | Listed configuration

Metric configuration reference	Listed configuration
Metric configuration 1	3 × 10 × 6/6.35 × 55 mm
Metric configuration 2	6 × 18 × 6/6.35 × 63 mm
Metric configuration 3	8 × 20 × 6/6.35 × 65 mm
Metric configuration 4	10 × 20 × 6/6.35 × 65 mm
Metric configuration 5	12 × 25 × 6/6.35 × 70 mm
Metric configuration 6	16 × 25 × 6/6.35 × 70 mm
Metric configuration 7	19 × 25 × 6/6.35 × 70 mm

Configuration comparison

6 listed configurations · compare configurations

Inch configuration reference | Listed configuration

Inch configuration reference	Listed configuration
Inch configuration 1	Head 1/4";shank 1/4";overall 2-1/2";cutting length to confirm
Inch configuration 2	5/16" × 3/4" × 1/4" × 2-9/16"
Inch configuration 3	3/8" × 3/4" × 1/4" × 2-9/16"
Inch configuration 4	1/2" × 1" × 1/4" × 2-3/4"
Inch configuration 5	5/8" × 1" × 1/4" × 2-3/4"
Inch configuration 6	3/4" × 1" × 1/4" × 2-3/4"

Flame-profile carbide burrs

Select the contact profile, cutting pattern and complete dimensional row together. Metric and inch configurations are separate references; confirm actual material, shank fit and operating speed before supply.

Geometry order

Head diameter × length of cut × shank diameter × total length

Cut-pattern directions

Standard cut; double cut; non-ferrous cut — selected per actual shape and material

Configuration comparison

7 listed configurations · compare configurations

Metric configuration reference | Listed configuration

Metric configuration reference	Listed configuration
Metric configuration 1	3 × 7 × 6/6.35 × 52 mm
Metric configuration 2	6 × 18 × 6/6.35 × 63 mm
Metric configuration 3	8 × 20 × 6/6.35 × 65 mm
Metric configuration 4	10 × 25 × 6/6.35 × 70 mm
Metric configuration 5	12 × 32 × 6/6.35 × 77 mm
Metric configuration 6	16 × 36 × 6/6.35 × 81 mm
Metric configuration 7	19 × 41 × 6/6.35 × 86 mm

Configuration comparison

5 listed configurations · compare configurations

Inch configuration reference | Listed configuration

Inch configuration reference	Listed configuration
Inch configuration 1	Head 1/4";shank 1/4";overall 2-1/2";cutting length to confirm
Inch configuration 2	5/16" × 3/4" × 1/4" × 2-9/16"
Inch configuration 3	1/2" × 1-1/4" × 1/4" × 3"
Inch configuration 4	5/8" × 1-7/16" × 1/4" × 3-3/16"
Inch configuration 5	3/4" × 1-5/8" × 1/4" × 3-2/5"

60-degree carbide countersink burrs

Select the contact profile, cutting pattern and complete dimensional row together. Metric and inch configurations are separate references; confirm actual material, shank fit and operating speed before supply.

Geometry order

Head diameter × length of cut × shank diameter × total length

Cut-pattern directions

Standard cut; double cut; non-ferrous cut — selected per actual shape and material

Included angle

60°

Configuration comparison

7 listed configurations · compare configurations

Metric configuration reference | Listed configuration

Metric configuration reference	Listed configuration
Metric configuration 1	3 × 2 × 6/6.35 × 50 mm
Metric configuration 2	6 × 5 × 6/6.35 × 55 mm
Metric configuration 3	8 × 7 × 6/6.35 × 57 mm
Metric configuration 4	10 × 8 × 6/6.35 × 58 mm
Metric configuration 5	12 × 10 × 6/6.35 × 60 mm
Metric configuration 6	16 × 13 × 6/6.35 × 62 mm
Metric configuration 7	25 × 22 × 6/6.35 × 72 mm

Configuration comparison

6 listed configurations · compare configurations

Inch configuration reference | Listed configuration

Inch configuration reference	Listed configuration
Inch configuration 1	1/4" × 3/16" × 1/4" × 2-3/16"
Inch configuration 2	5/16" × 9/32" × 1/4" × 2-1/4"
Inch configuration 3	3/8" × 5/16" × 1/4" × 2-1/4"
Inch configuration 4	1/2" × 7/16" × 1/4" × 2-3/8"
Inch configuration 5	5/8" × 1/2" × 1/4" × 2-7/16"
Inch configuration 6	1" × 7/8" × 1/4" × 2-4/5"

90-degree carbide countersink burrs

Select the contact profile, cutting pattern and complete dimensional row together. Metric and inch configurations are separate references; confirm actual material, shank fit and operating speed before supply.

Geometry order

Head diameter × length of cut × shank diameter × total length

Cut-pattern directions

Standard cut; double cut; non-ferrous cut — selected per actual shape and material

Included angle

90°

Configuration comparison

7 listed configurations · compare configurations

Metric configuration reference | Listed configuration

Metric configuration reference	Listed configuration
Metric configuration 1	3 × 2 × 6/6.35 × 52 mm
Metric configuration 2	6 × 3 × 6/6.35 × 53 mm
Metric configuration 3	8 × 4 × 6/6.35 × 54 mm
Metric configuration 4	10 × 5 × 6/6.35 × 55 mm
Metric configuration 5	12 × 6 × 6/6.35 × 56 mm
Metric configuration 6	16 × 8 × 6/6.35 × 58 mm
Metric configuration 7	25 × 12 × 6/6.35 × 62 mm

Configuration comparison

6 listed configurations · compare configurations

Inch configuration reference | Listed configuration

Inch configuration reference	Listed configuration
Inch configuration 1	1/4" × 1/8" × 1/4" × 2"
Inch configuration 2	5/16" × 5/32" × 1/4" × 2-3/16"
Inch configuration 3	3/8" × 3/16" × 1/4" × 2-3/16"
Inch configuration 4	1/2" × 1/4" × 1/4" × 2-1/4"
Inch configuration 5	5/8" × 5/16" × 1/4" × 2-3/8"
Inch configuration 6	1" × 1/2" × 1/4" × 2-9/16"

14-degree tapered carbide burrs

Select the contact profile, cutting pattern and complete dimensional row together. Metric and inch configurations are separate references; confirm actual material, shank fit and operating speed before supply.

Geometry order

Head diameter × length of cut × shank diameter × total length

Cut-pattern directions

Standard cut; double cut; non-ferrous cut — selected per actual shape and material

Included angle

14°

Configuration comparison

6 listed configurations · compare configurations

Metric configuration reference | Listed configuration

Metric configuration reference	Listed configuration
Metric configuration 1	3 × 10 × 6/6.35 × 55 mm
Metric configuration 2	6 × 16 × 6/6.35 × 61 mm
Metric configuration 3	8 × 22 × 6/6.35 × 67 mm
Metric configuration 4	10 × 25 × 6/6.35 × 70 mm
Metric configuration 5	12 × 28 × 6/6.35 × 73 mm
Metric configuration 6	16 × 33 × 6/6.35 × 78 mm

Configuration comparison

5 listed configurations · compare configurations

Inch configuration reference | Listed configuration

Inch configuration reference	Listed configuration
Inch configuration 1	1/4" × 5/8" × 1/4" × 2-3/8"
Inch configuration 2	5/16" × 7/8" × 1/4" × 2-5/8"
Inch configuration 3	3/8" × 1-1/16" × 1/4" × 2-4/5"
Inch configuration 4	1/2" × 1-1/8" × 1/4" × 2-7/8"
Inch configuration 5	5/8" × 1-5/16" × 1/4" × 3-1/8"

Conical carbide burrs

Select the contact profile, cutting pattern and complete dimensional row together. Metric and inch configurations are separate references; confirm actual material, shank fit and operating speed before supply.

Geometry order

Head diameter × length of cut × shank diameter × total length

Cut-pattern directions

Standard cut; double cut; non-ferrous cut — selected per actual shape and material

Configuration comparison

8 listed configurations · compare configurations

Metric configuration reference | Listed configuration

Metric configuration reference	Listed configuration
Metric configuration 1	3 × 11 × 6/6.35 × 56 mm
Metric configuration 2	6 × 13 × 6/6.35 × 58 mm
Metric configuration 3	6 × 18 × 6/6.35 × 63 mm
Metric configuration 4	6 × 25 × 6/6.35 × 70 mm
Metric configuration 5	8 × 20 × 6/6.35 × 65 mm
Metric configuration 6	10 × 20 × 6/6.35 × 65 mm
Metric configuration 7	12 × 25 × 6/6.35 × 70 mm
Metric configuration 8	16 × 25 × 6/6.35 × 70 mm

Configuration comparison

6 listed configurations · compare configurations

Inch configuration reference | Listed configuration

Inch configuration reference	Listed configuration
Inch configuration 1	1/4" × 1/2" × 1/4" × 2-1/4"
Inch configuration 2	Head 1/4";shank 1/4";overall 2-1/2";cutting length to confirm
Inch configuration 3	1/4" × 1" × 1/4" × 2-3/4"
Inch configuration 4	3/8" × 3/4" × 1/4" × 2-9/16"
Inch configuration 5	1/2" × 1" × 1/4" × 2-3/4"
Inch configuration 6	5/8" × 1" × 1/4" × 2-3/4"

Inverted-cone carbide burrs

Select the contact profile, cutting pattern and complete dimensional row together. Metric and inch configurations are separate references; confirm actual material, shank fit and operating speed before supply.

Geometry order

Head diameter × length of cut × shank diameter × total length

Cut-pattern directions

Standard cut; double cut; non-ferrous cut — selected per actual shape and material

Configuration comparison

6 listed configurations · compare configurations

Metric configuration reference | Listed configuration

Metric configuration reference	Listed configuration
Metric configuration 1	3 × 5 × 6/6.35 × 50 mm
Metric configuration 2	6 × 7 × 6/6.35 × 52 mm
Metric configuration 3	8 × 9 × 6/6.35 × 54 mm
Metric configuration 4	10 × 11 × 6/6.35 × 56 mm
Metric configuration 5	12 × 13 × 6/6.35 × 58 mm
Metric configuration 6	16 × 16 × 6/6.35 × 61 mm

Configuration comparison

4 listed configurations · compare configurations

Inch configuration reference | Listed configuration

Inch configuration reference	Listed configuration
Inch configuration 1	1/4" × 5/16" × 1/4" × 2-1/16"
Inch configuration 2	3/8" × 3/8" × 1/4" × 2-1/8"
Inch configuration 3	1/2" × 1/2" × 1/4" × 2-1/4"
Inch configuration 4	5/8" × 5/8" × 1/4" × 2-3/8"

Flat-end tapered carbide burrs

Select the contact profile, cutting pattern and complete dimensional row together. Metric and inch configurations are separate references; confirm actual material, shank fit and operating speed before supply.

Geometry order

Head diameter × length of cut × shank diameter × total length

Cut-pattern directions

Standard cut; double cut; non-ferrous cut — selected per actual shape and material

Configuration comparison

4 listed configurations · compare configurations

Metric configuration reference | Listed configuration

Metric configuration reference	Listed configuration
Metric configuration 1	6 × 14 × 6/6.35 × 59 mm
Metric configuration 2	8 × 17 × 6/6.35 × 62 mm
Metric configuration 3	10 × 20 × 6/6.35 × 65 mm
Metric configuration 4	12 × 20 × 6/6.35 × 65 mm

Thin-disc carbide burrs

A short disc-shaped cutting head gives a separate working geometry. Confirm the cutting dimension and selected shank before ordering.

Head diameter / cutting dimension / shank diameter / overall length

6 mm /4 /6 or6.35 mm /49 mm; 8 mm /4 /6 or6.35 mm /49 mm; 10 mm /5 /6 or6.35 mm /50 mm; 12 mm /5 /6 or6.35 mm /50 mm; 16 mm /5 /6 or6.35 mm /50 mm; 22 mm /5 /6 or6.35 mm /50 mm; 25 mm /5 /6 or6.35 mm /50 mm

Cutting-dimension unit

Confirm on selected drawing

Fine-tooth cylindrical rotary burrs

A cylindrical cutting direction uses separate small and larger dimensional combinations. Confirm tooth pattern, work material and mounting.

Geometry order

Head diameter × length of cut × shank diameter × overall length; mm

Configuration comparison

2 listed configurations · compare configurations

Option reference | Listed configuration

Option reference	Listed configuration
Option 1	3.17×25×3/3.17×51
Option 2	6×30×6/6.35×60

Five-piece carbide burr case

A separate assortment groups specific rotary contact profiles in a fitted holder or box. Approve the exact dimensional bill, cut pattern, case and finish rather than substituting similar-looking heads.

Shank diameter options

6 mm or6.35 mm

Profile selection

Cylindrical; ball-nose cylindrical; ball; oval; round tree

Alternate five-piece carbide burr case

A separate assortment groups specific rotary contact profiles in a fitted holder or box. Approve the exact dimensional bill, cut pattern, case and finish rather than substituting similar-looking heads.

Shank diameter options

6 mm or6.35 mm

Profile selection

Ball-nose cylindrical; round tree; end-cut cylindrical; taper; pointed tree

Ten-piece carbide burr case

A separate assortment groups specific rotary contact profiles in a fitted holder or box. Approve the exact dimensional bill, cut pattern, case and finish rather than substituting similar-looking heads.

Shank diameter options

6 mm or6.35 mm

Profile selection

Cylindrical; ball-nose cylindrical; taper; oval; pointed tree; inverted cone; 90° countersink; ball

Alternate ten-piece carbide burr case

A separate assortment groups specific rotary contact profiles in a fitted holder or box. Approve the exact dimensional bill, cut pattern, case and finish rather than substituting similar-looking heads.

Shank diameter options

6 mm or6.35 mm

Profile selection

Cylindrical; flame; taper; round tree; oval; ball-nose cylindrical; pointed tree; ball

Five-piece wooden carbide burr box

A separate assortment groups specific rotary contact profiles in a fitted holder or box. Approve the exact dimensional bill, cut pattern, case and finish rather than substituting similar-looking heads.

Shank diameter options

6 mm or6.35 mm

Profile selection

Taper; inverted cone; cone; ball-nose cylindrical; pointed tree

Six-piece wooden carbide burr box

A separate assortment groups specific rotary contact profiles in a fitted holder or box. Approve the exact dimensional bill, cut pattern, case and finish rather than substituting similar-looking heads.

Shank diameter options

6 mm or6.35 mm

Profile selection

60° countersink; ball; ball-nose cylindrical; oval; pointed tree; inverted cone

Nine-piece wooden carbide burr box

A separate assortment groups specific rotary contact profiles in a fitted holder or box. Approve the exact dimensional bill, cut pattern, case and finish rather than substituting similar-looking heads.

Shank diameter options

6 mm or6.35 mm

Profile selection

Mixed cylindrical, ball-nose cylindrical and round-tree dimensional choices

Eight-piece wooden carbide burr box

A separate assortment groups specific rotary contact profiles in a fitted holder or box. Approve the exact dimensional bill, cut pattern, case and finish rather than substituting similar-looking heads.

Shank diameter options

6 mm or6.35 mm

Profile selection

Mixed ball, round-tree, ball-nose cylindrical and cylindrical dimensional choices

Small-shank mixed carbide burr organiser

A separate assortment groups specific rotary contact profiles in a fitted holder or box. Approve the exact dimensional bill, cut pattern, case and finish rather than substituting similar-looking heads.

Shank diameter options

3/32", 3 mm or1/8"

Profile selection

Mixed inverted-cone, oval, flame, cylindrical, ball-nose cylindrical, pointed-tree, taper, cone, ball and round-tree forms

Five small-shank rotary burr forms

A separate assortment groups specific rotary contact profiles in a fitted holder or box. Approve the exact dimensional bill, cut pattern, case and finish rather than substituting similar-looking heads.

Shank diameter options

2.35 mm

Profile selection

Cylindrical; taper; pointed tree; small taper; short disc-form working head

Small-shank carbide burr case

A separate assortment groups specific rotary contact profiles in a fitted holder or box. Approve the exact dimensional bill, cut pattern, case and finish rather than substituting similar-looking heads.

Shank diameter options

3/32", 3 mm or1/8"

Profile selection

Mixed ball, cylindrical, ball-nose cylindrical and round-tree forms

Eight-piece compact carbide burr case

A separate assortment groups specific rotary contact profiles in a fitted holder or box. Approve the exact dimensional bill, cut pattern, case and finish rather than substituting similar-looking heads.

Shank diameter options

6 mm or6.35 mm

Profile selection

60° countersink; round tree; ball; ball-nose cylindrical; cylindrical

Three-profile small diamond file selection

A separate handled-file selection combines different contact sections for manual work. Flat, half-round, square, triangular, round and further special sections are available across the file range; approve the exact profiles, grit and grip finish for this selection.

Listed size

3×140×50 mm

Grit options

#100, #150, #200

Three-profile medium diamond file selection

A separate handled-file selection combines different contact sections for manual work. Flat, half-round, square, triangular, round and further special sections are available across the file range; approve the exact profiles, grit and grip finish for this selection.

Listed size

4×160×50 mm

Grit options

#100, #150, #200

Three-profile larger diamond file selection

A separate handled-file selection combines different contact sections for manual work. Flat, half-round, square, triangular, round and further special sections are available across the file range; approve the exact profiles, grit and grip finish for this selection.

Listed size

5×180×70 mm

Grit options

#100, #150, #200

Five-profile miniature diamond file selection

A separate handled-file selection combines different contact sections for manual work. Flat, half-round, square, triangular, round and further special sections are available across the file range; approve the exact profiles, grit and grip finish for this selection.

Listed size

2×100×40 mm

Grit options

#200

Five-profile small diamond file selection

A separate handled-file selection combines different contact sections for manual work. Flat, half-round, square, triangular, round and further special sections are available across the file range; approve the exact profiles, grit and grip finish for this selection.

Listed size

3×140×50 mm

Grit options

#100, #150, #200

Five-profile larger diamond file selection

A separate handled-file selection combines different contact sections for manual work. Flat, half-round, square, triangular, round and further special sections are available across the file range; approve the exact profiles, grit and grip finish for this selection.

Listed size

5×180×70 mm

Grit options

#100, #150, #200

Five-profile alternate diamond file selection

A separate handled-file selection combines different contact sections for manual work. Flat, half-round, square, triangular, round and further special sections are available across the file range; approve the exact profiles, grit and grip finish for this selection.

Listed size

5×180×70 mm

Grit options

#100, #150, #200

Ten-profile medium diamond file selection

A separate handled-file selection combines different contact sections for manual work. Flat, half-round, square, triangular, round and further special sections are available across the file range; approve the exact profiles, grit and grip finish for this selection.

Listed size

4×160×50 mm

Grit options

#100, #150, #200

Ten-profile small diamond file selection

A separate handled-file selection combines different contact sections for manual work. Flat, half-round, square, triangular, round and further special sections are available across the file range; approve the exact profiles, grit and grip finish for this selection.

Listed size

3×140×50 mm

Grit options

#100, #150, #200

Bent and special-shape diamond files

A separate handled-file selection combines different contact sections for manual work. Flat, half-round, square, triangular, round and further special sections are available across the file range; approve the exact profiles, grit and grip finish for this selection.

Listed size

3×140×25 mm

Grit options

#100, #240

Larger red-handle diamond files

A separate handled-file selection combines different contact sections for manual work. Flat, half-round, square, triangular, round and further special sections are available across the file range; approve the exact profiles, grit and grip finish for this selection.

Listed size

215×80 mm

Grit options

#150

Green-handle diamond files

A separate handled-file selection combines different contact sections for manual work. Flat, half-round, square, triangular, round and further special sections are available across the file range; approve the exact profiles, grit and grip finish for this selection.

Listed size

200×80 mm

Grit options

#200

Diamond-file surface finish and section choices

A file enquiry can specify the section needed for edges, flats, slots and curved surfaces. Surface-treatment directions can be selected to suit the approved item and appearance.

Section directions

Flat; half round; square; triangular; round; acute; knife; barrette; crossing; oval; lozenge; equalling round edge

Surface-treatment directions

Titanium, nickel, dark nickel and chromium plating — suitability and actual specification to confirm

Narrow straight diamond files

Straight, narrow diamond working faces retain separate width and grit combinations. Confirm drawing dimensions and exact cross-section.

Width/grade combinations

6/4/2 mm each at #150; 6/4/2 mm each at #240; 6/4/2/3 mm each at #320

Drawing length references

Overall130; working30 — drawing linear unit to confirm

Long straight diamond files

A longer straight-file direction uses a separate range of working widths and grades.

Width/grade combinations

8/6/4/2.5 mm each at #150; 8/6/4/2.5 mm each at #240; 8/6/4/2.5 mm each at #320

Drawing length references

Overall180; working50 — drawing linear unit to confirm

Round diamond files

Round files provide different diameters for small curved contact areas. Confirm the actual fit and grit.

Diameters

3.2/4.0/4.7/5.5 mm

Grit

#100

Overall length

220 mm

Working length

110 mm

Ultra-thin diamond files

A thin flat file retains its own width, thickness and grade choices. Confirm drawing and handle details.

Width

6 mm

Thickness

0.5 mm

Grade options

#180, #220, #320

Drawing length references

Overall140; working50 — drawing linear unit to confirm

Wood-handle lozenge diamond files

Lozenge-section file directions combine a wooden handle and separate file-body/working-length rows. Confirm the selected section drawing.

L / L1 combinations

75/65; 100/90; 125/115; 150/140 mm

Grit options

#200, #300

Section directions

Two illustrated lozenge variants

Wood-handle diamond hand files

A longer handled-file direction retains its own body and working-length combinations.

L / L1 combinations

100/80; 150/130; 200/180; 250/230; 300/280 mm

Grit

#100

Straight peripheral resin-bond grinding wheels

A resin-bond abrasive wheel is selected by the complete sectional drawing, abrasive type, work material, bore and machine conditions. Diamond and cubic-boron-nitride abrasive directions require item-specific selection; quoted dimensions are reference configurations.

Dimensional unit

mm

Bore H

Specify with order

Geometry order

D / T options / X, all mm

Configurations

12 /10,12 /2; 14 /10,13,16 /2; 16 /10,16 /2; 18 /10,16,20 /2; 20,25,30,40,50,60 each /8,10,16,20 /3; 80 /6,8,10,16,20 /3; 100,125,150 each /6,8,10,16,20 /4; 200 /6,8,10,16,20,30 /4,10; 250 /8,10,16,20,25,30 /5; 300 /10,16,20,25,32,40 /5,10; 350,400 each /16,20,25,32,40 /5,10

Thin peripheral resin-bond wheels

A resin-bond abrasive wheel is selected by the complete sectional drawing, abrasive type, work material, bore and machine conditions. Diamond and cubic-boron-nitride abrasive directions require item-specific selection; quoted dimensions are reference configurations.

Dimensional unit

mm

Bore H

Specify with order

Geometry order

D / T options / X / E options, all mm

Configurations

75,100,125,150 each /1,1.2,1.5 /5 /0.8,1.2; 175,200 each /1.2,1.5 /5 /1,1.2

Rounded-edge peripheral resin-bond wheels

A resin-bond abrasive wheel is selected by the complete sectional drawing, abrasive type, work material, bore and machine conditions. Diamond and cubic-boron-nitride abrasive directions require item-specific selection; quoted dimensions are reference configurations.

Dimensional unit

mm

Bore H

Specify with order

Geometry order

D / X / T, all mm

Configurations

100/6/6; 125/6/6; 150/6/6; 200/8/4

15-degree dish-face resin-bond wheels

A resin-bond abrasive wheel is selected by the complete sectional drawing, abrasive type, work material, bore and machine conditions. Diamond and cubic-boron-nitride abrasive directions require item-specific selection; quoted dimensions are reference configurations.

Dimensional unit

mm

Bore H

Specify with order

Geometry order

D / W options / X options / E / J; T=E+X, all mm

Configurations

75 /5,10 /2,3,4,5 /6 /38; 100 /4,5,6,10 /2,3,4,5 /6 /63; 125 /4,5,6,10 /2,3,4,5 /7 /80; 150 /4,5,6,10 /2,3,4,5 /9 /90; 200 /10 /2,3,4,5 /10 /133

Section angle

15°

15-degree dish-rim resin-bond wheels

A resin-bond abrasive wheel is selected by the complete sectional drawing, abrasive type, work material, bore and machine conditions. Diamond and cubic-boron-nitride abrasive directions require item-specific selection; quoted dimensions are reference configurations.

Dimensional unit

mm

Bore H

Specify with order

Geometry order

D / W / T, all mm

Configurations

50/3/5; 75/5/8; 80/5/8; 100/5/10; 100/8/10; 125/8/10; 125/12/12; 150/8/10; 150/12/12

Section angle

15°

Straight-cup resin-bond grinding wheels

A resin-bond abrasive wheel is selected by the complete sectional drawing, abrasive type, work material, bore and machine conditions. Diamond and cubic-boron-nitride abrasive directions require item-specific selection; quoted dimensions are reference configurations.

Dimensional unit

mm

Bore H

Specify with order

Geometry order

D / W options / X options / A / E; T=A+X, all mm

Configurations

50 /7 /2,3,4,5 /17 /6; 75 /5,10 /2,3,4,5 /19 /10; 100 /5,10 /2,3,4,5 /27 /10; 125 /5,10,15,20 /2,3,4,5 /29 /10; 150 /5,10,20 /2,3,4,5 /29 /10; 175 /25 /2,3,4,5 /25 /13; 200 /20 /2,3,4,5 /37 /13

Double-rim recessed resin-bond wheels

A resin-bond abrasive wheel is selected by the complete sectional drawing, abrasive type, work material, bore and machine conditions. Diamond and cubic-boron-nitride abrasive directions require item-specific selection; quoted dimensions are reference configurations.

Dimensional unit

mm

Bore H

Specify with order

Diameter D

150/175/200 mm

W

6 mm

X options

2/3/4/5 mm

T relation

A+2X

A

14 mm

E

12 mm

70-degree cup-face resin-bond wheels

A resin-bond abrasive wheel is selected by the complete sectional drawing, abrasive type, work material, bore and machine conditions. Diamond and cubic-boron-nitride abrasive directions require item-specific selection; quoted dimensions are reference configurations.

Dimensional unit

mm

Bore H

Specify with order

Geometry order

D / W options / X options / A / E / J; T=A+X, all mm

Configurations

75 /4,5,6 /2,3,4,5 /20 /10 /61; 100 /5,10,15 /2,3,4,5 /33 /10 /77; 125 /5,10,15 /2,3,4,5 /33 /10 /102; 150 /10,20 /2,3,4,5 /33 /10 /127

Section angle

70°

70-degree cup-rim resin-bond wheels

A resin-bond abrasive wheel is selected by the complete sectional drawing, abrasive type, work material, bore and machine conditions. Diamond and cubic-boron-nitride abrasive directions require item-specific selection; quoted dimensions are reference configurations.

Dimensional unit

mm

Bore H

Specify with order

Geometry order

D / X / W options / T / E, all mm

Configurations

75 /1.5 /8,10 /30 /10; 100 /3 /7,10 /40 /10; 125 /3 /7,10 /45 /10; 150 /5 /7,10 /45 /10

Section angle

70°

20-degree dish-face resin-bond wheels

A resin-bond abrasive wheel is selected by the complete sectional drawing, abrasive type, work material, bore and machine conditions. Diamond and cubic-boron-nitride abrasive directions require item-specific selection; quoted dimensions are reference configurations.

Dimensional unit

mm

Bore H

Specify with order

Geometry order

D / W options / X options / A / E; T=A+X, all mm

Configurations

50 /2 /2,3 /8 /6; 50 /3,4 /2,3,4,5 /8 /6; 75 /5,10 /2,3,4,5 /9 /6; 100,125 each /5,10 /2,3,4,5 /10 /8; 150 /5,6,10,15 /2,3,4,5 /13 /9; 200 /10,20 /2,3,4,5 /13 /10

Section angle

20°

45-degree dish-face resin-bond wheels

A resin-bond abrasive wheel is selected by the complete sectional drawing, abrasive type, work material, bore and machine conditions. Diamond and cubic-boron-nitride abrasive directions require item-specific selection; quoted dimensions are reference configurations.

Dimensional unit

mm

Bore H

Specify with order

Geometry order

D / W options / X options / A / E; T=A+X, all mm

Configurations

50 /3 /2,3,4 /17 /6; 50 /4 /2,3,4,5 /17 /6; 75 /5,6,10 /2,3,4,5 /22 /9; 100 /3,5,10 /2,3,4,5 /29 /10; 125 /4,5,6,10,15 /2,3,4,5 /29 /10; 150 /5,6,10,15 /2,3,4,5 /29 /10; 200 /10,20 /2,3,4,5 /37 /12

Section angle

45°

Shallow dish-rim resin-bond wheels

A separate resin-bond wheel section is selected against its complete dimensional drawing. Confirm abrasive, work material, machine conditions and required bore.

Dimensional unit

mm

Bore H

Specify with order

Geometry order

D / W options / X / T, mm

Configurations

50 /2 /2 /10; 75 /3,5,10 /3 /13; 100 /3,5,10 /3 /13; 125 /4 /3,5 /16; 125 /5,10 /3 /16; 150 /5,10 /3 /16

Section angle

45°

Recessed peripheral resin-bond wheels

A separate resin-bond wheel section is selected against its complete dimensional drawing. Confirm abrasive, work material, machine conditions and required bore.

Dimensional unit

mm

Bore H

Specify with order

Geometry order

D / X / U / T, mm

Configurations

110/5/8/12; 150/2/6/8; 175/5/10/16; 200/5/6/12; 300/5/15/20; 400/5/12/28

Thin recessed-edge resin-bond wheels

A separate resin-bond wheel section is selected against its complete dimensional drawing. Confirm abrasive, work material, machine conditions and required bore.

Dimensional unit

mm

Bore H

Specify with order

Geometry order

D / W / U / T / J, mm

Configurations

80/6/3/6/50; 100/6/3/6/70; 125/6/3/6/90; 150/6/3/6/120

254 mm fine-rim abrasive wheel

A separate thin-rim wheel reference retains both nominal size and the detailed drawing tolerance references. Confirm drawing interpretation and actual machine fit before quotation.

Grit

#120/140

Nominal listed size

254×2×25.4×10 mm

Drawing outer diameter

254.0

Drawing bore range

25.41–25.45

Drawing rim width range

10.2–10.5

Drawing overall/rim thickness references

2 and1.2; confirm drawing unit and section

Compact riveted-handle diamond sharpener

A compact pointed sharpening surface uses a riveted handle. Confirm shape, edge material and required packing.

Overall length

182 mm

Surface length

80 mm

Grit

#400

Groove

Without groove

Riveted-handle pointed diamond sharpeners

Choose plain or grooved working surfaces and a single or two-grade arrangement. Confirm which flat/curved face contacts the intended edge.

Overall length

257 mm

Surface length

157 mm

Configuration comparison

4 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	#400, no groove
Configuration 2	Flat face #600;curved face #300;no groove
Configuration 3	#400 with groove
Configuration 4	Flat face #600;curved face #300;with groove

Contoured-handle pointed diamond sharpeners

Choose plain or grooved working surfaces and a single or two-grade arrangement. Confirm which flat/curved face contacts the intended edge.

Overall length

272 mm

Surface length

158 mm

Configuration comparison

4 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	#400, no groove
Configuration 2	Flat face #600;curved face #300;no groove
Configuration 3	#400 with groove
Configuration 4	Flat face #600;curved face #300;with groove

Guarded-handle pointed diamond sharpener

A guarded handle supports a pointed working-surface direction. Select the single-grade or grooved two-grade configuration.

Overall length

260 mm

Surface length

150 mm

Configuration comparison

2 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	#400;without groove
Configuration 2	Flat face #600;curved face #300;with groove

Guarded pointed dual-face sharpener

A distinct handle and working-face profile gives a separate manual sharpening option. Confirm surface geometry and intended edge material.

Overall length

260 mm

Surface length

150 mm

Face grades

Flat face #600; curved face #300

Groove

Included

Guarded rounded dual-face sharpener

A distinct handle and working-face profile gives a separate manual sharpening option. Confirm surface geometry and intended edge material.

Overall length

260 mm

Surface length

150 mm

Face grades

One face #600; other face #300

Groove

Included

Long guarded flat-and-curved sharpener

A distinct handle and working-face profile gives a separate manual sharpening option. Confirm surface geometry and intended edge material.

Overall length

260 mm

Surface length

150 mm

Face grades

Flat face #600; curved face #300

Groove

Included

Long guarded tapered dual-face sharpener

A distinct handle and working-face profile gives a separate manual sharpening option. Confirm surface geometry and intended edge material.

Overall length

260 mm

Surface length

150 mm

Face grades

One face #600; other face #300

Groove

Included

Black-handle tapered dual-face sharpener

A distinct handle and working-face profile gives a separate manual sharpening option. Confirm surface geometry and intended edge material.

Overall length

260 mm

Surface length

150 mm

Face grades

One face #600; other face #300

Groove

Included

Black-handle rounded dual-face sharpener

A distinct handle and working-face profile gives a separate manual sharpening option. Confirm surface geometry and intended edge material.

Overall length

260 mm

Surface length

150 mm

Face grades

One face #600; other face #300

Groove

Included

Short grooved diamond hook sharpener

A short half-round abrasive form includes a groove and a pocket-pen style holder. Confirm groove and hook fit.

Size

100 mm

Colors

Blue; silver

Contact form

Half round with groove

Dual-profile diamond hook sharpener

A pen-style holder combines a conical face and a half-round grooved face. Confirm selected dimensions and abrasive grade.

Profile arrangement

One side conical; other side half round with a groove

Long grooved diamond hook sharpener

A longer half-round abrasive form includes a groove and a pen-style holder. Confirm actual tip and groove geometry.

Size

140 mm

Colors

Blue; silver

Contact form

Half round with groove

Conical diamond file pen

A pen-style holder carries conical diamond-file directions. Confirm actual point form, dimensions, grade and interchangeable contents.

Working form

Conical diamond file

Five miniature diamond files with aluminium handle

A small handle supports a five-profile miniature-file assortment. Confirm how each working tip is retained and packed.

Count

5 pieces/set

Handle

Aluminium

Size

Ø2×75×40 mm

Sections

Flat; half round; round; square; triangular

T-head abrasive dressing tool

A handled transverse abrasive head provides a compact dressing direction. Confirm the tool and wheel material to be worked.

Grit

#30

Size

1/2"×1-3/4"

Nail and foot filing tools

Separate stainless-steel nail-file and diamond foot-file directions retain different sizes. Confirm contact profile, finish and care instructions for the selected item.

Stainless-steel nail file size

150 mm

Diamond foot file size

180 mm

Face arrangement

One side coarse; other side fine

Pointed abrasive dressing tools

A pointed dressing-tool direction lists separate carat references. Confirm the actual diamond specification, mounting, dimensions and application for the selected item.

Listed carat options

0.25/0.5/0.75/1.0/1.25/1.5/1.75/2.0 cts

Oval diamond sharpening rods

An oval abrasive rod uses a handled form and separate size and grade choices. Match rod profile to the intended edge.

Size options

8"; 10"

Grade/color references

#300 yellow; #1200 red

Wheel-dressing cutter tool

A handled wheel-dresser direction uses rotating dressing cutters for deglazing and reshaping grinding surfaces. Confirm exact wheel and cutter compatibility.

Working direction

Dressing cutters in a handled holder

Three folding diamond sharpening stones

A folding-stone assortment provides three individually color-coded grades.

Count

3 pieces/set

Grade/color references

#300 blue; #600 red; #1200 green

Size

1"×3"

Handled miniature diamond sharpeners

A miniature handled surface provides a compact manual sharpening direction.

Grade/color references

#300 blue; #600 yellow; #1200 red

Sharpening surface

3/4"×2"

Grooved pocket diamond stone

A flat pocket stone includes a straight groove. Confirm groove form and desired grade.

Grit choices

#300; #600; #1200

Size

3/4"×2-1/2"

Card-format diamond sharpening stone

A flat card-format abrasive surface provides a pocket sharpening direction.

Grit choices

#300; #600; #1200

Size

2"×3-1/4"

Three-stick diamond sharpener

A compact holder combines three diamond sticks in a folding-style arrangement.

Size

60×60×16 mm

Construction

Three diamond sticks

Guarded-handle carbide sharpener

A separate carbide sharpening direction uses an open guarded handle. Confirm intended edge type and cutter arrangement.

Size

160×70×18 mm

Working material direction

Carbide sharpener

Plain-surface folding diamond sharpener

A folding holder protects a two-grade working surface. Confirm opening mechanism, edge compatibility and selected surface pattern.

Face grades

One face #300; other face #1200

Sharpening surface

3/4"×4"

Surface direction

Continuous abrasive surface

Dot-pattern folding diamond sharpener

A folding holder protects a two-grade working surface. Confirm opening mechanism, edge compatibility and selected surface pattern.

Face grades

One face #300; other face #1200

Sharpening surface

3/4"×4"

Surface direction

Dot-pattern abrasive surface

Folding tapered serration sharpener

A folding holder protects a tapered rod direction for serrated-edge enquiries. Confirm tooth dimensions and actual abrasive grade.

Taper diameter

Ø1.6–Ø5.0 mm

Flat diamond bench stones

Bench-stone directions retain separate size choices and grades.

Grit choices

#300; #400; #600

Size options

1"×3"×1/4"; 2"×6"×1/4"

Four-face diamond bench stone

A four-face sharpening block groups four color-coded working grades in a holder.

Size

2"×6"

Face grade/color references

#600 red; #400 green; #300 yellow; #200 blue

Two-grade bench sharpening plate

A broad plate uses different grades on opposite faces. Confirm support holder and actual surface pattern.

Size

8"×2-1/2"×5/16"

Face grades

One face #1000; other face #400

Two-grade compact combo sharpener

A compact enclosed-holder direction uses two working grades.

Face grade/color references

#300 yellow; #1200 red

Sharpening surface

1"×4"

Medium diamond bench stones

A bench-stone range retains three different width configurations. Select grade and support arrangement with the exact size.

Grade/color references

#300 yellow; #1200 red

Size options

2-1/2"×6"×3/4"; 2-1/4"×6"×3/4"; 1-5/8"×6"×3/4"

Long diamond bench stone

A longer bench-stone direction retains a separate working footprint.

Grade/color references

#300 yellow; #1200 red

Size

2-1/2"×11"×3/4"

Double-sided diamond bench stone

Opposite faces provide two grades in a separate larger bench-stone format.

Face grade/color references

#300 yellow; #1200 red

Size

2-1/2"×8"×1"

Flat circular oscillating abrasive blades

A separate oscillating accessory profile supports controlled renovation enquiries. Match the exact mounting drawing, abrasive construction, intended substrate and working thickness; similar centre patterns do not establish universal machine compatibility.

Grit

#40

Listed size

Diameter2-1/2"

Mounting directions

Star-profile multi-slot or circular multi-hole centre

Alternate-surface circular oscillating blades

A separate oscillating accessory profile supports controlled renovation enquiries. Match the exact mounting drawing, abrasive construction, intended substrate and working thickness; similar centre patterns do not establish universal machine compatibility.

Grit

#30

Listed size

Diameter3"

Mounting directions

Illustrated polygon-profile centre; surface construction selected separately

Coarse raised-centre oscillating blades

A separate oscillating accessory profile supports controlled renovation enquiries. Match the exact mounting drawing, abrasive construction, intended substrate and working thickness; similar centre patterns do not establish universal machine compatibility.

Grit

#36

Listed size

3-5/12"×3/8"

Mounting directions

Circular multi-hole or star-profile multi-slot centre

Fine raised-centre oscillating blades

A separate oscillating accessory profile supports controlled renovation enquiries. Match the exact mounting drawing, abrasive construction, intended substrate and working thickness; similar centre patterns do not establish universal machine compatibility.

Grit

#30

Listed size

3-5/12"×3/8"

Mounting directions

Star-profile multi-slot or circular multi-hole centre

Compact coarse segment oscillating blades

A separate oscillating accessory profile supports controlled renovation enquiries. Match the exact mounting drawing, abrasive construction, intended substrate and working thickness; similar centre patterns do not establish universal machine compatibility.

Grit

#36

Listed size

2-5/8"×3/8"

Mounting directions

Star-profile multi-slot or circular multi-hole centre

Compact fine segment oscillating blades

A separate oscillating accessory profile supports controlled renovation enquiries. Match the exact mounting drawing, abrasive construction, intended substrate and working thickness; similar centre patterns do not establish universal machine compatibility.

Grit

#30

Listed size

2-5/8"×3/8"

Mounting directions

Circular multi-hole or star-profile multi-slot centre

Wide coarse segment oscillating blades

A separate oscillating accessory profile supports controlled renovation enquiries. Match the exact mounting drawing, abrasive construction, intended substrate and working thickness; similar centre patterns do not establish universal machine compatibility.

Grit

#36

Listed size

3-5/12"×3/8"

Mounting directions

Circular multi-hole or star-profile multi-slot centre

Wide fine segment oscillating blades

A separate oscillating accessory profile supports controlled renovation enquiries. Match the exact mounting drawing, abrasive construction, intended substrate and working thickness; similar centre patterns do not establish universal machine compatibility.

Grit

#30

Listed size

3-5/12"×3/8"

Mounting directions

Star-profile multi-slot or circular multi-hole centre

Narrow coarse arced oscillating blade

A separate oscillating accessory profile supports controlled renovation enquiries. Match the exact mounting drawing, abrasive construction, intended substrate and working thickness; similar centre patterns do not establish universal machine compatibility.

Grit

#30

Listed size

2-1/4"×3"

Mounting directions

Illustrated polygon-profile centre

Narrow fine arced oscillating blades

A separate oscillating accessory profile supports controlled renovation enquiries. Match the exact mounting drawing, abrasive construction, intended substrate and working thickness; similar centre patterns do not establish universal machine compatibility.

Grit

#30

Listed size

2-1/4"×3"

Mounting directions

Star-profile multi-slot, polygon-profile or circular multi-hole centre

Triangular abrasive oscillating plates

A separate oscillating accessory profile supports controlled renovation enquiries. Match the exact mounting drawing, abrasive construction, intended substrate and working thickness; similar centre patterns do not establish universal machine compatibility.

Grit

#20

Listed size

3-1/16"×2-15/16"×3/8"

Mounting directions

Star-profile multi-slot or circular multi-hole centre

Coarser triangular oscillating plate

A separate oscillating accessory profile supports controlled renovation enquiries. Match the exact mounting drawing, abrasive construction, intended substrate and working thickness; similar centre patterns do not establish universal machine compatibility.

Grit

#12

Listed size

3-2/3"×3-2/3"×3/8"

Mounting directions

Star-profile multi-slot centre

Pointed oscillating abrasive fingers

A separate oscillating accessory profile supports controlled renovation enquiries. Match the exact mounting drawing, abrasive construction, intended substrate and working thickness; similar centre patterns do not establish universal machine compatibility.

Grit

#20

Listed size

1-1/3"×3-1/4"×1-7/8"

Mounting directions

Star-profile multi-slot or circular multi-hole centre

Slim pointed oscillating abrasive finger

A separate narrow abrasive finger uses a circular multi-hole centre. Confirm the complete dimensional drawing before ordering.

Grit

#20

Partial size references

1-1/8"×2-7/12"; third dimension to confirm

Mounting direction

Circular multi-hole centre

Replacement carbide grout-saw tip

A separate carbide cutting tip supports manual grout-saw replacement enquiries. Confirm fixing-hole pattern, tip dimensions and holder fit.

Working component

Carbide grout-saw tip

Hard-plastic-handle grout saw

A manual grout saw combines two carbide tips with a rigid plastic handle. Confirm spare tips, fixing and packing.

Tip arrangement

Two carbide tips

Handle

Hard plastic

Rubber-handle grout saw

A separate handle construction combines two carbide tips with a rubber handle direction.

Tip arrangement

Two carbide tips

Handle

Rubber

Color combinations

Blue/grey; black/yellow

Compact triangular diamond polishing pads

A triangular polishing-pad direction retains its own footprint and grit sequence. Confirm backing, attachment and compatible holder.

Grit choices

#30, #50, #100, #200, #400, #600

Size

3-1/5"×3-1/5"

Larger triangular diamond polishing pads

A larger triangular polishing-pad direction retains a separate footprint. Confirm backing and holder fit for the selected grade.

Grit choices

#30, #50, #100, #200, #400, #600

Size

3-2/3"×3-2/3"

Brazed diamond cutting and bevel-working wheels

A diamond abrasive wheel direction is listed for cutting and edge working on porcelain tile. Confirm the required bevel drawing, exact operation and machine fit.

Size options

115 mm; 125 mm

Connection

M14

Grit/color references

#50/60 red; #80/100 grey

Uniform-spike carbide working wheel

A carbide spike-wheel direction addresses wood and rubber grinding. Confirm selected tooth construction, workpiece and operating limit.

Listed size

125×22.23 mm

Brazed diamond spike working wheels

A spiked diamond surface is listed for removing epoxy or urethane coatings, adhesive deposits, rust and scale, and for metal-burr working. Confirm the actual substrate and operation.

Detail configuration

125×22.23 mm

Separate diameter options

125 mm; 180 mm

Bore for separate diameter options

22.23 mm

Threaded diamond metal-working wheel

A brazed diamond wheel direction supports cutting and grinding enquiries for steel sheet, stainless steel, rebar, cast iron, aluminium and other non-ferrous metals. Confirm exact material and operating conditions.

Listed size

7"

Connection

M14

Aluminium-base electroplated abrasive wheel

An aluminium-based wheel direction provides diamond or CBN abrasive selection for sharpening cutting tools. The stated grade is specifically linked to the CBN option.

Diameter

200 mm

Thickness

25.4 mm

Bore

15.875 mm

CBN grit

#200

Base

Aluminium

Threaded diamond mortar-raking bits

A mortar-raking bit range uses separate diameter/working-size combinations and threaded interfaces. Confirm joint width, depth, substrate and machine requirements.

Size options

4×25; 8×25; 8×50; 8×75; 8×100 mm

Connection options

M14; 5/8"-11

High-speed-steel rotary shaping burrs

High-speed-steel working heads support freehand milling, routing, shaping, profiling and slotting enquiries in hard or soft wood, non-ferrous or precious metals, plastics and plaster. Choose the complete head drawing and confirm speed and workholding.

Common shank diameter

3.175 mm

Cylindrical geometry

Head Ø7.95 mm; working height9.5 mm; overall38 mm

Thin-disc geometry

Head Ø9.5 mm; working height1.27 mm; overall39 mm

Rounded cylindrical geometry

Head Ø6.35 mm; working height10.9 mm; overall38 mm

Conical geometry

Head Ø6.35 mm; working height9.5 mm; overall38 mm

Small cylindrical geometry

Head Ø3.175 mm; working height6.35 mm; overall38 mm

Small pointed geometry

Head Ø1.6 mm; working height6.35 mm; overall38 mm

Small ball geometry

Head Ø3.175 mm; overall39 mm

Large ball geometry

Head Ø7.9 mm; overall38 mm

Finish directions

Illustrated silver-colored and gold-colored variants; exact treatment to confirm

Vacuum-brazed diamond hand files

A separate brazed diamond-file direction is listed for porcelain and other hard brittle materials. Approve contact sections, grip finish and grade for the actual item.

Grit

#120

Size options

3×140×50; 4×160×50; 5×180×70 mm

Handle-color directions

Black; green; red

Profile directions

Illustrated flat, half-round, triangular, round and square forms

Vacuum-brazed diamond cup grinding wheels

A cup-shaped diamond abrasive direction retains separate diameters and a common bore. Specify the actual work material, grit, bond, mounting and operating limits for the selected item.

Diameter options

125 mm; 180 mm

Bore

22.23 mm

Miniature diamond burr and cutting-disc kit

A fitted case combines miniature cutting discs with small-head abrasive burrs. Confirm the complete contents and mandrel arrangement.

Cutting-disc contents

2 pieces; 40 mm discs; 3 mm shank

Burr contents

10 pieces; 1.2 mm head diameter; 3 mm shank

Small-head diamond-coated twist drills

A small diamond-coated twist-drill direction addresses hard-material hole work with rotary or flexible-shaft equipment. Confirm actual material, coolant and machine settings.

Head diameter options

0.8 mm; 1.2 mm

Shank diameter

2.35 mm

Total length

44 mm

Double-ended diamond twist drills

A double-ended head direction retains its own drill and shank dimensions for jade, glass and other hard brittle materials.

Head diameter options

1.6 mm; 2.1 mm

Shank diameter

3.175 mm

Total length

46 mm

Small-shank coarse rotary working heads

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

2.35 mm; 3 mm; 1/8"

Grade direction

Coarse

Configuration comparison

7 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Rotor-saw form: 22.23×6.35 mm
Configuration 2	Cone: 9.5×19 mm
Configuration 3	Taper: 6.35×28.6 mm
Configuration 4	Ball nose: 9.5×12.7 mm
Configuration 5	Cylinder: 9.5×12.7 mm
Configuration 6	Sphere: 9.5×9.5 mm
Configuration 7	Flame: 9.5×12.7 mm

Large-shank extra-coarse rotary heads

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

6 mm; 1/4"

Grade direction

Extra coarse

Configuration comparison

4 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Ball nose: 12.7×31.8 mm
Configuration 2	Ball nose: 22.2×31.8 mm
Configuration 3	Flame: 19×31.8 mm
Configuration 4	Sphere: 25.4×25.4 mm

Thread-mounted extra-coarse rotary heads

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

M14; 5/8"-11

Grade direction

Extra coarse

Configuration comparison

4 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Listed ball-nose profile: 12.7×50.8 mm
Configuration 2	Ball nose: 22.2×31.8 mm
Configuration 3	Flame: 19×31.8 mm
Configuration 4	Sphere: 25.4×25.4 mm

Fine small-shank rotary profiles

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

2.35 mm; 3 mm; 1/8"

Grade direction

Fine

Configuration comparison

5 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Ball nose: 5×27 mm
Configuration 2	Taper: 5×24 mm
Configuration 3	Bud: 6.35×19 mm
Configuration 4	Ball nose: 9.5×16 mm
Configuration 5	Sphere: 6.35×6.35 mm

Fine small-shank special rotary profiles

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

2.35 mm; 3 mm; 1/8"

Grade direction

Fine

Configuration comparison

5 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Taper with uncut end: 11.45×12.7 mm
Configuration 2	Dovetail: 11.45×14 mm
Configuration 3	Cylinder: 8.35×12.7 mm
Configuration 4	Flame: 8.2×14.1 mm
Configuration 5	Ball nose: 5.175×23 mm

Coarse small-shank special rotary profiles

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

2.35 mm; 3 mm; 1/8"

Grade direction

Coarse

Configuration comparison

6 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Ball nose: 6×28 mm
Configuration 2	Taper: 6×24 mm
Configuration 3	Bud: 7×19 mm
Configuration 4	Ball nose: 9.5×16 mm
Configuration 5	Dovetail: 11.85×10.5 mm
Configuration 6	Sphere: 6.35×6.35 mm

Cylindrical graded rotary heads

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

6 mm; 1/4"

Configuration comparison

3 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Fine: 12×49.5 mm
Configuration 2	Coarse: 13×50 mm
Configuration 3	Extra coarse: 13.5×50.3 mm

Large spherical graded rotary heads

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

6 mm; 1/4"

Configuration comparison

3 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Fine: 27.2×25.8 mm
Configuration 2	Coarse: 28.5×27.5 mm
Configuration 3	Extra coarse: 29×28 mm

Small spherical graded rotary heads

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

6 mm; 1/4"

Configuration comparison

3 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Fine: 14×14 mm
Configuration 2	Coarse: 15×15 mm
Configuration 3	Extra coarse: 15.5×15.5 mm

Conical graded rotary heads

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

6 mm; 1/4"

Configuration comparison

3 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Fine: 20.6×34.5 mm
Configuration 2	Coarse: 21.7×34.9 mm
Configuration 3	Extra coarse: 22.2×35.2 mm

Small flame-form graded rotary heads

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

6 mm; 1/4"

Configuration comparison

3 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Fine: 14×21.5 mm
Configuration 2	Coarse: 15×22 mm
Configuration 3	Extra coarse: 15.5×22.3 mm

Medium flame-form graded rotary heads

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

6 mm; 1/4"

Configuration comparison

3 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Fine: 17.5×31.2 mm
Configuration 2	Coarse: 18×31.5 mm
Configuration 3	Extra coarse: 18.5×31.8 mm

Large flame-form graded rotary heads

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

6 mm; 1/4"

Configuration comparison

3 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Fine: 20.6×35.8 mm
Configuration 2	Coarse: 22×36.2 mm
Configuration 3	Extra coarse: 22.6×37.5 mm

Long narrow ball-nose graded heads

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

6 mm; 1/4"

Configuration comparison

3 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Fine: 8×45.6 mm
Configuration 2	Coarse: 9.5×47 mm
Configuration 3	Extra coarse: 10.2×47.4 mm

Long broad ball-nose graded heads

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

6 mm; 1/4"

Configuration comparison

3 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Fine: 14.6×52 mm
Configuration 2	Coarse: 15.8×52.3 mm
Configuration 3	Extra coarse: 17×53 mm

Super-coarse spherical rotary head

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

6 mm; 1/4"

Configuration 1

Super coarse: 30.16×28.99 mm

Long coarse special rotary heads

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

6 mm; 1/4"

Grade direction

Coarse

Configuration comparison

2 listed configurations · compare configurations

Configuration reference | Listed configuration

Configuration reference	Listed configuration
Configuration 1	Bud: 9.5×35 mm
Configuration 2	Dovetail: 19.05×32 mm

Extended extra-coarse taper heads

A separate rotary working-head selection retains its profile, cutting coarseness and dimensional pairing. Confirm actual work material, tool construction, mounting and operating speed against the selected drawing.

Geometry order

Head diameter × head length, mm

Shank or connection options

6 mm; 1/4" OR3/8"-24 UNF thread

Grade direction

Extra coarse

Configuration 1

Taper: 22×102 mm

Mixed woodworking rotary-tool sets

Fitted clear cases group different abrasive, toothed and pointed working profiles. Approve the exact contents and selected geometry for the intended shaping sequence.

Shank options

2.35 mm; 3 mm; 1/8"

Set directions

Three illustrated mixed-head assortment layouts

Woodworking shaping discs

Separate coarse and extra-coarse shaping-disc directions retain their own diameter choices. Confirm guard, bore, machine suitability and working direction before supply.

Coarse disc options

105 mm or115 mm diameter; bore20/22.23 mm

Extra-coarse disc option

115 mm diameter; bore20/22.23 mm

Ridged-rim diamond core drills

A ridged diamond working-rim direction uses threaded mounting and separate diameter selection.

Diameter range

5–128 mm

Grit

#30

Connection options

M14; 5/8"-11

Small ridged-rim diamond drills

A small abrasive-drill direction retains different mounting configurations.

Diameter range

5–14 mm

Grit

#50

Shank directions

Hexagon; separate1/4" hexagon quick-change option

Coarse diamond core-drill range

A separate core-drill direction retains its own stated diameter range and threaded mount.

Diameter range

20–150 mm

Grit

#30

Connection options

M14; 5/8"-11

Vacuum-brazed diamond chamfering heads

A chamfer-head direction provides three stated working-size ranges. Confirm the relevant dimension, angle and holder from the actual drawing.

Listed size ranges

5–12 mm; 5–35 mm; 35–75 mm

Flanged diamond core-drill direction

A separate vacuum-brazed core-drill illustration includes a flange-like working construction. Confirm diameter, height, interface and operating conditions by drawing.

Construction direction

Illustrated vacuum-brazed flanged core drill

Combined diamond finger-mill and chamfer head

A combined working profile provides an abrasive tip and conical shoulder. Confirm exact geometry and operating conditions.

Head/angle configurations

Ø6 mm×60°; Ø10 mm×60°

Connection options

M14; 5/8"-11

CNC router and chamfer-head direction

A small combined routing and chamfering direction uses threaded mounting. Confirm the precise profile and the meaning of the 6 mm reference.

Listed size reference

6 mm

Connection options

M14; 5/8"-11

Coarser diamond cylindrical working bits

A cylindrical abrasive working-bit direction retains an explicit working length and diameter selection. Confirm coolant, work material and machine conditions.

Grit

#30

Working diameter options

5/6/8/10/12/20 mm

Working length

50 mm

Connection options

M14; 5/8"-11

Finer diamond cylindrical working bits

A cylindrical abrasive working-bit direction retains an explicit working length and diameter selection. Confirm coolant, work material and machine conditions.

Grit

#50

Working diameter options

5/6/8/10/12/20 mm

Working length

50 mm

Connection options

M14; 5/8"-11

Fine-grade threaded diamond working bits

A further grade direction retains separate diameter and working-size combinations.

Grit

#100

Size options

4×25; 8×25; 8×50; 8×75; 8×100 mm

Connection options

M14; 5/8"-11