Coated papers and rolls
Compare sheet, strip and roll constructions for the requested abrasive, backing, binder and finish.
Enquire about this range ↗Independent abrasive-consumables sourcing
Abrasives for sanding, cutting and finishing
Abrasives, Sanding & Cutting Consumables Sourcing
Source sandpaper, cloth and belts, abrasive discs, cutting and grinding wheels, brushes, diamond tools and finishing accessories through one enquiry.
- Build a material and machine-specific abrasive schedule.
- Compare backing, joint, attachment and wheel geometry before ordering.
- Coordinate sample review, private-label artwork and packing requirements.
Manufacturing, product documents and order conditions depend on the model and supply route selected for your project.
Start with a product reference, intended use and estimated quantity. We bring product selection, sample questions and quotation details into one conversation.
Email your reference image ↗Buying scopeCoated, bonded and finishing consumables
SelectionWork material, machine and finish
Order planningGrades, formats and packing by quotation
Contactkunhuow@gmail.com
Explore the product range
Build the range
your buyers need.
Choose a focused product or discuss a coordinated assortment. Each direction can be developed into a more specific model and packaging brief.
Cloth and endless belts
Keep cloth weight, blend, joint, width and loop length together in the buying specification.
Enquire about this range ↗Hook-and-loop, film and mesh
Request the attachment system and hole drawing with the grit assortment.
Enquire about this range ↗Flap and fibre abrasives
Include disc profile, support construction and work-material requirements.
Enquire about this range ↗Sponges, screen and nonwoven
Separate flexible sanding bodies, screen mesh and finishing media.
Enquire about this range ↗Cutting and grinding wheels
Flat cutting, depressed cutting and depressed grinding have separate schedules.
Enquire about this range ↗Cup, wheel and hand brushes
Specify crimped/knotted construction, mounting, diameter and packaging.
Enquire about this range ↗Diamond, core drilling and saw blades
Match geometry, interface, segment construction and the actual work material.
Enquire about this range ↗Pads, bonnets and accessory kits
Provide a machine-interface drawing and an itemised kit bill.
Enquire about this range ↗Stones, points and bonded wheels
Develop the profile and abrasive specification for sharpening or finishing.
Enquire about this range ↗Hand sanding and surface preparation
Plan blocks, holders, floats, glove systems and quick-change assortments.
Enquire about this range ↗Cleaning towels
Confirm textile composition, dimensions and packing separately from abrasive products.
Enquire about this range ↗Reference product directions
Start with a product.
Define the details.
Use these options to describe what you are buying. The public references identify your enquiry; the final model and specification are confirmed before an order.
REFERENCE 0355-01
Sandpaper construction schedule
Endpoint pairs summarise discrete grades; request the exact grit list.
- Dimensions and configurations
20 listed configurations · view dimensions
Option | Abrasive and backing | Listed grit endpoints Option Abrasive and backing Listed grit endpoints 1 Silica/glass, B 36–220 2 Alumina, B/C 36–220 3 Alumina, B-kraft 60–400 4 Alumina, C-kraft 60–600 5 Alumina, latex paper 60–1000 6 Alumina, latex paper 60–1200 7 Alumina, latex paper 60–1200 8 Ceramic, latex paper 60–600 9 Alumina, B-kraft 60–2000 10 Black SiC, C-kraft 60–2000 11 Black SiC, kraft 60–2000 12 Green SiC, brown latex paper 60–2000 13 Green SiC, blue latex paper 60–5000 14 Alumina, lemon latex paper 60–2000 15/16 Ceramic, latex paper 60–800 17 White alumina, C/D/E 36–400 18 White alumina, E/C 40–400 19 White alumina, D/E 36–400 20 Alumina, E/F 36–600 21 Black SiC, D/E Not specified - Formats
- Options 1–19: 230×280mm sheets. Rolls and strips depend on construction.
REFERENCE 0355-02
Hook-and-loop, film and mesh abrasives
- Dimensions and configurations
9 listed configurations · view dimensions
Construction | Listed grit endpoints Construction Listed grit endpoints Ceramic/E–F paper 24–220 Alumina/C or E paper 24–600 Alumina/C–D paper 80–600 Ceramic/paper 60–600 Alumina/PET film 40–2000 Alumina-zirconia/gold latex paper 40–1200 Alumina-zirconia/pink latex paper 60–1200 Black SiC 40–1000 Alumina mesh 80–800 - Paper disc diameters
- C/E: 115/125/150/180/230mm; C–D: 115/125/150/180mm. Ceramic E–F: 100/115/125/150/180mm.
- Other formats
- Selected delta sheets and rectangular strips; gold/pink options also have pressure-sensitive adhesive versions.
- Connections
- Hole pattern, backing and attachment need a matched drawing.
REFERENCE 0355-03
Cloth sheets and roll constructions
- Dimensions and configurations
8 listed configurations · view dimensions
Construction | Binder | Listed grit endpoints Construction Binder Listed grit endpoints J/alumina Glue/glue 36–400 J-cotton/alumina Resin/resin 36–400 Flexible J/alumina Resin/resin 36–600 X/alumina Resin/resin 24–600 Flexible J/alumina Resin/resin 40–600 X/black SiC Resin/resin 24–600 XY/zirconia Resin/resin 36–120 Ceramic/cloth Resin/resin 24–120 - X-cloth blends
- 35% polyester/65% cotton for flap-disc manufacture; 80% polyester/20% cotton for belts.
- Flexible J versions
- Separate hand/wood, hand-or-machine/wood-and-metal, machine/wood and machine/metal variants.
- Formats
- Selected sheets 180×280/230×280mm; J emery rolls 38/50/100/120mm×25m.
- Version confirmation
- Zirconia roll dimensions and ceramic backing grade require a current specification.
REFERENCE 0355-04
Endless abrasive belts
- Abrasive options
- Alumina and zirconia; ceramic is also shown in the related catalogue.
- Joint constructions
- Lap, butt and S joints.
- Sizing
- Develop to the selected belt width, length and machine.
REFERENCE 0355-05
Flap discs
- Abrasives
- Alumina, zirconia, ceramic alumina or black silicon carbide.
- Support and profile
- Fibre or plastic body; flat or tapered.
- Listed grit span
- 24–120; exact grade selection required.
- Disc diameters
- 50/75/100/115/125/150/180mm.
REFERENCE 0355-06
Fibre-backed sanding discs
- Abrasives
- Alumina, zirconia, ceramic alumina or black silicon carbide.
- Grits
- 16/24/36/40/50/60/80/100/120/150/180/220/240/280/320/360/400.
- Diameters
- 100/115/125/150/180/230mm.
REFERENCE 0355-07
Sanding sponges
Choose the body and matching grit schedule together.
- Abrasives
- Alumina or black silicon carbide; closed coating.
- Bodies
- Soft, medium, hard or EVA variants.
- Dimensions and configurations
2 listed configurations · view dimensions
Size mm | Associated grit list Size mm Associated grit list 100×70×25;125×100×12;120×90×25;100×65×25;140×115×5 36/40/50/60/80/100/120/150/180/220/320/400 120×100×12 80/120/220/320/400
REFERENCE 0355-08
Foam-backed abrasive paper rolls
- Construction
- Alumina and zirconia; resin-over-resin; semi-open.
- Listed grit span
- 80–800.
- Roll
- 115mm×25m.
REFERENCE 0355-09
Nonwoven finishing material
- Construction
- Alumina or black silicon carbide with nylon.
- Listed sizes
- 150×230mm;225×275mm;75mm;125mm;150mm.
- Selection
- Confirm shape and attachment for the single-dimension options.
REFERENCE 0355-10
Type 27 depressed grinding wheels
These are distinct wheel constructions; match every row to its own specification.
- Dimensions and configurations
21 listed configurations · view dimensions
Diameter×thickness×bore (mm) | Catalogue maximum rpm Diameter×thickness×bore (mm) Catalogue maximum rpm 100×3.0×16 15300 100×4.0×16 15300 100×6.0×16 Confirm 100×7.0×16 Confirm 115×3.0×22.23 13300 115×4.0×22.23 13300 115×6.0×22.23 13300 115×7.0×22.23 13300 125×3.0×22.23 12250 125×4.0×22.23 12250 125×6.0×22.23 12250 125×7.0×22.23 Confirm 150×3.0×22.23 10200 150×6.0×22.23 10200 180×3.0×22.23 8500 180×6.0×22.23 8500 180×7.0×22.23 8500 180×8.0×22.23 8500 230×3.0×22.23 6650 230×6.0×22.23 6650 230×7.0×22.23 6650 - Selection
- Confirm the work material, current marking and machine compatibility.
REFERENCE 0355-11
Type 41 flat cutting wheels
These are distinct wheel constructions; match every row to its own specification.
- Dimensions and configurations
48 listed configurations · view dimensions
Diameter×thickness×bore (mm) | Catalogue maximum rpm Diameter×thickness×bore (mm) Catalogue maximum rpm 100×1.0/1.2×16 15300 100×1.6×16 15300 100×2.0×16 15300 100×2.5×16 15300 100×3.0×16 15300 115×0.8×22.23 13300 115×1.0×22.23 13300 115×1.6×22.23 13300 115×2.0×22.23 13300 115×2.5×22.23 13300 115×3.0×22.23 13300 125×0.8×22.23 12250 125×1.0×22.23 12250 125×1.6×22.23 12250 125×2.0×22.23 12250 125×2.5×22.23 12250 125×3.0×22.23 12250 150×1.6×22.23 10200 150×2.0×22.23 10200 150×2.5×22.23 10200 150×3.0×22.23 10200 180×1.6×22.23 8500 180×1.8×22.23 8500 180×2.0×22.23 8500 180×2.5×22.23 8500 180×3.0×22.23 8500 230×1.6×22.23 6650 230×2.0×22.23 6650 230×2.5×22.23 6650 230×3.0×22.23 6650 300×3.0×25.4 5100 350×3.0×25.4 4400 400×3.0×25.4 3850 300×3.5×25.4 5100 350×3.5×25.4 4400 400×3.5×25.4 3850 300×4.0×25.4 5100 350×4.0×25.4 4400 400×4.0×25.4 3850 300×3.0×30 5100 350×3.0×32 4400 400×3.0×32 3850 300×3.5×32 5100 350×3.5×32 4400 400×3.5×32 3850 300×4.0×32 5100 350×4.0×32 4400 400×4.0×32 3850 - Selection
- Confirm the work material, current marking and machine compatibility.
REFERENCE 0355-12
Type 42 depressed cutting wheels
These are distinct wheel constructions; match every row to its own specification.
- Dimensions and configurations
43 listed configurations · view dimensions
Diameter×thickness×bore (mm) | Catalogue maximum rpm Diameter×thickness×bore (mm) Catalogue maximum rpm 100×1.6×16 15300 100×2.0×16 15300 100×2.5×16 15300 100×3.0×16 15300 100×3.5×16 15300 115×1.6×22.23 13300 115×2.0×22.23 13300 115×2.5×22.23 13300 115×3.0×22.23 13300 125×1.6×22.23 12250 125×2.0×22.23 12250 125×2.5×22.23 12250 125×3.0×22.23 12250 150×1.6×22.23 10200 150×2.0×22.23 10200 150×2.5×22.23 10200 150×3.0×22.23 10200 180×1.6×22.23 8500 180×2.0×22.23 8500 180×2.5×22.23 8500 180×3.0×22.23 8500 230×1.6×22.23 6650 230×2.0×22.23 6650 230×2.5×22.23 6650 230×3.0×22.23 6650 300×3.0×25.4 5100 350×3.0×25.4 4400 400×3.0×25.4 3850 300×3.5×25.4 5100 350×3.5×25.4 4400 400×3.5×25.4 3850 300×4.0×25.4 5100 350×4.0×25.4 4400 400×4.0×25.4 3850 300×3.0×30 5100 350×3.0×32 4400 400×3.0×32 3850 300×3.5×32 5100 350×3.5×32 4400 400×3.5×32 3850 300×4.0×32 5100 350×4.0×32 4400 400×4.0×32 3850 - Selection
- Confirm the work material, current marking and machine compatibility.
REFERENCE 0355-13
Alternative cutting-disc constructions
Work-material approval is specific to the selected construction.
- Thin cutting dimensions (mm)
- 105×1.2×16;115×1×22.23;125×1×22.23.
- Combined cutting/grinding/finishing dimensions (mm)
- 100×2.2×16;115×2.2×22.23;125×2.5×22.23.
- Multi-material cutting dimensions (mm)
- 115×1×22.23;125×1×22.23.
- Additional disc geometry (mm)
- 105×1.2×16;115×1.2/1.6×22.23;125×1.2/1.6×22.23;150×1.6×22.23;180×1.6×22.23;230×1.6/1.9×22.23.
REFERENCE 0355-15
Bevel brushes
- Selection
- Threaded:100/115mm; bore-mounted:100/115/125mm.
REFERENCE 0355-16
Machine circular brushes
- Selection
- 100/125/150/175/200/250/300mm.
REFERENCE 0355-17
Shafted cup, end and circular brushes
- Selection
- Cup:50/65/75mm; end:12/17/25/28mm; wheel:40/50/65/75/100mm.
REFERENCE 0355-19
Knotted cup and bevel brushes
- Selection
- Separate threaded and shaft-mounted constructions.
REFERENCE 0355-20
Knotted wheel brushes
- Selection
- Separate bore-mounted and threaded constructions;100/125/150/175/200mm.
REFERENCE 0355-21
Hand brushes and retail assortments
- Selection
- Knife brushes; wooden/plastic handles;3/4/5-row versions; assorted wheel-brush sets.
REFERENCE 0355-22
Hot-pressed ceramic blades
- Listed outer diameters (mm)
- 105/110/115/125/150/180/200/230/300
- 105mm reference
- Bore16/20/22.23mm; segment1.8×10mm.
REFERENCE 0355-23
Continuous-rim diamond blades
- Listed outer diameters (mm)
- 105/110/115/125/150/180/200/230/250/300/350
- 105mm reference
- Bore16/20/22.23mm; segment1.7×5mm.
REFERENCE 0355-24
Turbo diamond blades
- Listed outer diameters (mm)
- 105/110/115/125/150/180/200/230/250/300/350
- 105mm reference
- Bore16/20/22.23mm; segment2.0×7mm.
REFERENCE 0355-25
Laser-welded diamond core drills
- Listed outer diameters (mm)
- 25/28/32/38/50/62/75/88/105/115/125/150/180/230/250/300/350/400/450/500
REFERENCE 0355-26
Laser-welded diamond blades
- Listed outer diameters (mm)
- 105/115/125/150/180/230/300/350/400/450/500/600
REFERENCE 0355-27
Segmented diamond blades
- Listed outer diameters (mm)
- 105/110/115/125/150/180/200/230/250/300/350
REFERENCE 0355-28
Single/double-row diamond cup wheels
- Listed outer diameters (mm)
- 100/115/125/150/180
REFERENCE 0355-29
Carbide-tipped saw blades
- Listed outer diameters (mm)
- 110/125/150/165/185/210/230/255/305/355/400/450/500/600/700
- 110mm reference
- Bore16/20/22.23mm;20/24/30/40 teeth.
REFERENCE 0355-30
Turbo diamond cup wheels
- Listed outer diameters (mm)
- 100/115/125/150/180
REFERENCE 0355-31
Rubber support pads
- Dimensions and configurations
4 listed configurations · view dimensions
Diameter mm | Thread options Diameter mm Thread options 100 M10×1.25/M10×1.5/M14×2 115 M10×1.25/M10×1.5/M14×2/5⁄8-11NC 125 M14×2/5⁄8-11NC 150/180 M14×2/5⁄8-11NC/M16×2 - Other constructions
- A separate100mm pad:M10×1.25/M14×2/5⁄8-11NC;125mm spindle pad:M6.
REFERENCE 0355-32
Plastic support pads
- Dimensions and configurations
4 listed configurations · view dimensions
Diameter mm | Thread options Diameter mm Thread options 80/100 3⁄8×24/M10×1.25/M10×1.5/M14×2 115 M10×1.25/M14×2/5⁄8-11NC 125 M14×2/5⁄8-11NC 150/180 M14×2/5⁄8-11NC/M16×2
REFERENCE 0355-33
Hook-and-loop and polishing plastic pads
- Dimensions and configurations
4 listed configurations · view dimensions
Diameter mm | Thread options Diameter mm Thread options 100 M10×1.25/M10×1.5/M14×2 115 M10×1.5/M14×2/5⁄8-11NC 125 M14×2/5⁄8-11NC 150/180 M14×2/5⁄8-11NC/M16×2 - Constructions
- Separate hook-and-loop/polishing versions and a regional-style moulding; match the selected drawing.
REFERENCE 0355-34
Foam polishing pads
- Dimensions
- 150×50mm;200×50mm.
- Threads to confirm
- M14×2 or M16×2; select per pad.
REFERENCE 0355-35
PU support pads
- Diameters
- 125/150mm.
- Interface
- Request the verified thread drawing for the chosen diameter.
REFERENCE 0355-37
Nonwoven finishing wheels
Hardness markings require supplier interpretation; they are not a stated Shore scale.
- Dimensions and configurations
5 listed configurations · view dimensions
Dimension mm | Catalogue hardness marking | Pieces/carton Dimension mm Catalogue hardness marking Pieces/carton 100×10 5P/U1 500 100×12 7P/U3 500 100×15 9P/U5 500 115×12 12P/U8 400 125×12 12P/U8 300
REFERENCE 0355-39
Polishing accessory kit
- Contents
- 1 polishing sponge;1 synthetic pad with rubber support;1 rubber pad;1 synthetic bonnet;1 wool bonnet;3 hook-and-loop abrasive discs.
REFERENCE 0355-40
Shaft-mounted flap wheels
- Abrasive
- Alumina cloth; resin-over-resin.
- Grits
- 40/50/60/80/100/120/150/180/240/320.
- Dimensions and configurations
18 listed configurations · view dimensions
Diameter×height×shank mm | Maximum rpm Diameter×height×shank mm Maximum rpm 30×10×3 25500 60×20×6 12700 30×10×6 25500 60×30×6 12700 30×15×6 25500 60×40×6 12700 40×10×6 19100 60×50×6 12700 40×15×6 19100 80×15×6 9600 40×20×6 19100 80×20×6 9600 50×10×6 15300 80×30×6 9600 50×15×6 15300 80×40×6 9600 50×20×6 15300 80×50×6 9600
REFERENCE 0355-41
Sharpening stones and rubbing bricks
- Directions
- Alumina and black/green silicon-carbide combination stones; tubular, oval, mini and handled-brick formats.
REFERENCE 0355-42
Vitrified grinding wheels
- Selection
- Geometry, grit, carton quantity and weight are configuration-specific.
REFERENCE 0355-43
Mounted abrasive points
- Grains
- Pink/white fused alumina, alumina or green silicon carbide.
- Profiles
- Cylindrical, tapered, ball and other formed heads.
REFERENCE 0355-44
Bore-mounted flap wheels
- Construction
- Alumina cloth; resin-over-resin.
REFERENCE 0355-45
Slotted abrasive discs
- Construction
- Black silicon carbide or alumina; fiberglass backing.
REFERENCE 0355-47
Hand sanding blocks and floats
- Directions
- Rigid, soft, pivot/pole, foam, cork and longboard constructions; attachment drawings required.
REFERENCE 0355-48
Sanding glove systems
- Selection
- Interchangeable sanding/cleaning attachments; confirm material and fit.
REFERENCE 0355-49
Quick-change and stripping abrasives
- Directions
- Conditioning discs, paint/varnish removers, rust strippers, flap-type accessories and holders.
REFERENCE 0355-50
Sander and polisher pad kits
- Directions
- Hook-and-loop, vinyl-face, shafted pads and assorted retail kits.
REFERENCE 0355-51
Microfiber cleaning towels
- Catalogue composition
- 80% polyester/20% polyamide; custom composition requires approval.
These schedules are selection summaries, not stock lists. Listed endpoints summarise discrete grades and do not imply every intermediate grit or dimension. Request the complete matched table and current technical approval for the selected construction. Product, packing and commercial terms are confirmed in the quotation.
What matters for this category
A better brief.
A clearer comparison.
Focus the sourcing conversation on the features, materials and production details that make a difference to your product range.
One structured abrasive enquiry
Send the complete operation sequence so we can organise candidates for sanding, cutting, preparation and finishing in a single comparison.
Configuration-level comparison
We keep abrasive, backing, binder, attachment and geometry linked; similarly named products need their own approved specification.
Quote-ready assortments
We can turn a replenishment list or retail assortment into line items with agreed quantities, pack artwork and acceptance points.
Branding, configuration & packaging
Make the product
fit your programme.
Bring artwork, reference samples and a target cost. The available process, minimum quantity, sample charges and development scope are reviewed for the chosen option.
Dimensions and interfaces
Submit sheets, strips, belts, disc holes, bore or thread drawings and machine details; feasibility is checked for each item.
Grade and assortment planning
List each grit, construction, quantity and kit component. We will request a matched offer and identify any substitutions for your approval.
Private-label presentation
Send authorised artwork, languages, barcode requirements and carton plans. Private-label availability and order conditions depend on the selected product.
Quality & product evidence
Turn requirements
into checks.
Agree which product characteristics need testing and how the approved sample relates to the bulk order.
Sample acceptance
Define the work material, operation and acceptance criteria before sample evaluation. No general lifetime or cutting-rate claim replaces your approved comparison.
Inspection points
Agree what should be checked at incoming material, production and final packing stages, and which measurements or reports are needed for each line.
Traceable dispatch
Request lot identification, current product markings, packing counts and the agreed inspection record before release. Rotating accessories need the correct current machine and product documentation.
Test capability is a starting point for the inspection plan. Request the method, applicable model and results needed for your order.
Documents matched to the order
Ask for evidence
that fits the product.
Tell us which documents your import and acceptance process needs. We coordinate the selected item’s paperwork with the quotation.
State the sales market, intended users and required files in your first enquiry. Current validity and scope are checked for the selected supplier and product; a category description does not certify every item.
Share your document requirements ↗- Technical pack
- Ask for the selected drawing, grit specification, backing or bond, dimensions, interface and any model-specific operating limits.
- Commercial pack
- Agree sample charges, minimum quantities, quotation validity, production timing, payment and packing in the written offer.
- Market documents
- Tell us the destination and exact product requirements. We will request relevant current declarations or test reports for review; coverage is never assumed from a group claim.
Built around how you sell
Different buyers.
Different specifications.
Your sales channel changes the assortment, packaging and quality priorities. Tell us the intended use as well as the product name.
Wood, furniture and coatings
Describe the substrate, existing coating, desired finish and machine so the abrasive schedule can be evaluated for your process.
Metal fabrication and maintenance
Provide material grade, cutting or finishing operation, geometry and machine interface for product comparison.
Stone, tile, construction and refinishing
Specify the work material, cut or finish, water-use conditions and compatible equipment before a diamond or finishing accessory is selected.
From first brief to a defined order
One contact.
A practical next step.
Samples, commercial terms and responsibilities are agreed for the project. Use the same product and packing specification when comparing quotations.
Share the requirement
Product, reference image, quantity, sales market and timing.
Compare suitable options
Review configuration, materials, sample scope and relevant documents.
Approve the specification
Agree artwork, packaging, sample, testing and inspection criteria.
Confirm the order plan
Set price, payment, production, delivery and defect remedies in writing.
Buyer questions
Before you send
your first enquiry.
Practical answers about this sourcing direction, customization and the reference options. Your agreed specification and written quotation determine the actual order.
How do I request an abrasive quotation?
Email kunhuow@gmail.com with the work material, operation, machine, construction, grade, dimensions and quantity. Include a drawing or current specification where possible.
Can I combine several abrasive families?
Yes. You can submit paper, belts, discs, brushes, blades and accessories as one enquiry. Each line is quoted against its own agreed specification.
Are all listed grit numbers continuously available?
No. Endpoint pairs describe the span of discrete catalogue grades. Request the exact grade list and current availability for your chosen construction.
How are belts specified?
Provide width, length, backing, abrasive, grit, joint and machine details. A matched sample and quotation are needed before order approval.
Can I request a different hole pattern or attachment?
Send a dimensioned drawing of the backing pad and hole layout. We will check feasibility for the chosen paper, film, mesh or accessory.
Are flat and depressed wheels interchangeable?
Specify the required cutting or grinding construction and machine documentation. Each wheel must be selected and approved for its intended operation; the schedules do not establish interchangeability.
Can you arrange private-label packing?
Submit authorised artwork, language, barcode and packing requirements. Availability, minimum quantities and artwork approval are confirmed for the selected products.
Are samples available and what is the lead time?
We can request a sample plan. Sample cost, quantity and timing are confirmed in the offer, along with the conditions for production scheduling.
How are quality checks agreed?
Set the work material, operation, inspection measurements and acceptance criteria before ordering. We can coordinate the requested records for the chosen items.
Does every abrasive carry the same certification?
No. Required documents and their product, issuer, date and market scope must be checked for the exact item.
Can I source pads and complete kits?
Yes. Send the machine interface and an itemised component list, including quantities, materials, abrasives and retail packing requirements.
Is this a factory-direct website?
Factory Sourcing Hub is an independent trading and sourcing service. We coordinate enquiries and selected supply options; the written offer identifies the agreed specifications and commercial terms.
Who handles my enquiry?
Factory Sourcing Hub handles this enquiry as an independent sourcing and trading service. The product route, supplier suitability, sample scope and order responsibilities are agreed for the actual project.
How do I get a price and order minimum?
Send the product reference, quantities per variation, customization and packaging. Prices, minimums, sample charges and delivery dates are confirmed in a current quotation; the page is not a live inventory or price feed.
Can I discuss samples and inspection before ordering?
Yes. State whether you need a reference sample, a customized sample or development work. Agree the sample cost and shipping, approval specification, inspection plan and remedy for non-conforming goods before the bulk order.
What should I attach to my email?
Reference images, drawings, logo artwork and a product list are useful. Include quantities, the intended users and sales market, packaging, required documents and timing. After submitting the form, email attachments to kunhuow@gmail.com with your enquiry reference.
Tell us what you are planning
Your next order
starts with a brief.
A reference picture or a short description is enough to begin. Add the details you already know; the optional fields help make the follow-up more useful.
- Work material, operation and required finish
- Machine, attachment, dimensions and operating requirements
- Abrasive, backing, binder, grits and quantity per line
- Sample criteria, documents, artwork and packing
Download the enquiry checklist ↓
Independent sourcing and trading service. Supplier choice, service costs and order conditions are discussed for your project.
Discuss your requirements.
Product selection, customization, samples and quotation enquiries.
Explore other sourcing directions
More options for
your product list.
Compare separate product ranges and prepare a brief that fits your assortment.
Abrasives, Cutting & Grinding Consumables and Tool Sourcing
Source cutting and grinding discs, grinding wheels, flap and coated abrasives, diamond saw blades, steel-wire wheels, brushes, drilling/chiselling and driver-bit directions, mounted points and broader tool programmes.
Explore this service ↗
Coated Abrasives, Sanding Belts, Paper & Discs Sourcing
Coordinate abrasive cloth, belts, paper, film, mesh, flap and fibre disc requirements with material-specific references, samples and packing review.
Explore this service ↗
Cutting, Drilling, Abrasive & Workshop Tool Sourcing
Source cutting and drilling tools, taps, mills, inserts, wood and masonry cutters, diamond tools, abrasives, polishing systems, hand tools and configured assortments.
Explore this service ↗
Diamond, Carbide, CBN & Abrasive Tool Sourcing
Source diamond, carbide, CBN and HSS tools for drilling, cutting, grinding, profiling, polishing, filing, sharpening, floor preparation and renovation, with matched grades, geometry, mounts and assortments.
Explore this service ↗Information basis: published product information reviewed . Reference details support a sourcing discussion. Current supply, samples and product-specific documents are confirmed for the selected item.